If you just want one or two instruments from a large SoundFont then follow this procedure.  Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont.  Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont).  Right-Click on the main heading of the original SoundFont and choose Close File.  Now simply choose File, Save (or Save As), Close.
That’s what this book is about and it delivers in spades. It sharpens your will to learn and how to set goals rather than your actual technique. If you need to reinvigorate your desire to learn and find the importance of why you are learning in the first place, this book that will apply Zen lessons to the art of learning guitar in a way that is very motivational (but not in a shove spiritual dogma in your face kind of way). If that is what you are looking for in a guitar book, it is hard to beat Zen Guitar.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Wood: Maple & Walnut - Fingerboard: Maple - Frets: Jumbo - Inlay: Black - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line, Reverse - Bridge: Lo-Pro Edge - Hardware: 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: DiMarzio - Pickup Configuration: H-S-H - String Instrument Finish: White
This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.

i play a squire jazz bass, it has always sounded good and played very good. wanted to " jazz it up" a bit so i was searching for new pickups and control pots and stumbled on your site.. first thing i thought was oh wow, how freaking cool is that.. after ALOT of searching, i purchased the obsidian wire control pots for a jazz bass as well as the control plate since mine looked pretty worn.. i also got the v-mod pickups from fender. install was just as smooth as advertised, especially since i had never even cracked open a bass before, ever.. done in less than 30 minutes ( as far as the wiring ) the pickguard had to be removed and cut to fit, and the old knobs didn't fit ( totally expected ) it is now done and i cannot believe the difference in tone and clarity.... all i can say is your products are innovative and really much more than i expected... thank you..." - Bob Vintage Jazz Bass® Wiring
SOLD OUT: ASK we may have another in stock Here we have a wonderful example of the Alvarez answer to the classic Martin 000-18 now famously linked to the Eric Clapton version from Martin om guitar today. Imported to the US by Saint Lewis Music 36 years ago. This fine example of the Alvarez 5014 is in excellent vintage condition you will not believe that she is over 36 years old when you see this in person you will realize it has been amazingly well cared for these past 3.6 decades. Its fit and finish is excellent as is its play action / neck angle ... this guitar is a pleasure to play and is truly EASY on the eyes... The neck is 1-11/16" at the nut and very comfortable to play with very little visible play wear to fingerboard or frets one will notice that this example is WELL above average condition for this age of guitar its really rare to see. Its beautiful SITKA SPRUCE top is solid and the back and sides are excellent grade Mahogany as is the neck please refer to the pics ... with nice details like its herringbone rosette, celluloid tortis pick guard, exotic Brazilian Coral Rosewood headstock overlay this guitar is more fancy than the other 5014's we have had and is in near mint vintage condition. The woods are well aged and the tone and volume has nicely opened up and aged like fine wine it takes time... a lot of guitar for this kind of price. Crafted in Japan over 36 years ago and kept in Amazing condition all these years just for you... Nicely set up with a NEW Martin Bone Nut & compensated bone saddle here at JVGUITARS. get this gem before she's gone! questions let me know... jvguitars@gmail.com .

With an amp rated at 15 watts and an 8-inch speaker, the Spider Classic 15 is more or less in the same power class as the Champion 20. Like the Fender, it also has a 3.5 mm line input for connecting a smartphone, so guitarists can play along with recorded music or a music instruction app, plus a ¼-inch headphone/recording output, a built-in tuner, and a jack for an optional footswitch that switches between clean and distorted tones.
The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at FirstGuitar.com, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
The original switch configuration used from 1950 to 1952 allowed selection of neck pickup with treble tone cut in the first position (for a bassier sound), the neck pickup with its natural tone in the second position with no tone, and in the third switch position both pickups together with the neck pickup blended into the bridge, depending on the position of the second “tone” knob. The first knob functioned normally as a master volume control. This configuration did not have a true tone control knob.[2]
Another unusual bass amp is Ashdown's B-Social combo amp, which the company calls a "desktop amp".[10] The 75 watt combo amp has two 5" speakers, which provide stereo sound. While some keyboard amplifiers and electric guitar amplifiers provide stereo sound through two speakers, this is a rare feature on a bass amp. The B-Social provides Micro USB and Bluetooth 4.0 connections for hooking it up to a desktop computer. The amp is versatile enough to be used for playing bass, playing recorded music or streaming music as a home entertainment centre, or for amplifying video game sound effects.[11] The amp has a special socket for connecting amp and cabinet simulation and effects unit apps which can be downloaded on iPhones and iPads. The amp was called "B-Social" because it has a second input, so that a bassist can jam with another performer. The B-Social's USB audio interface can be connected to Digital Audio Workstations for sound recording.[12]
Blanket’s richly interwoven cinematic ambient rock has rapidly evolved since last year’s debut EP Our Brief Encounters. We have had a sneak preview of their new material and can confirm it is a sizeable slab of Big Rock that will induce palm-sweat from fans of Lonely The Brave, Nordic Giants and This Will Destroy You. Guitarists Bobby and Simon - the duo at the heart of this sound - are masters of catharsis, bonding warm, cascading lines into structures of true grandeur.
Guitar lessons work best if you're putting your skills together to learn how to play songs. That's why Guitar Tricks has a ton of great song tutorials for when you've mastered the Core Learning System, or if you want to try something new. These easy guitar songs are great, especially if you're a beginner that recently picked up an electric guitar. 

A more successful early electric was the Ro-Pat-In "Frying Pan" guitar. This was played lap-steel style, and was the earliest I know of that uses something close to the magnetic pickups as they exist in modern guitars. This was conceptualized by George Beauchamp in 1931... he played Hawaiian style, thus the lap steel design. He met Adolph Rickenbacker and together the two worked out the details of the pickup system, and put this into production in 1932... the company name was eventually changed to "Rickenbacher".

The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.

Let me tell you about the vintage look at why it is favored among so many musicians and aestheticians around the world. Well, I won’t be able to tell you much about the vintage look in this short text, but what I can tell you is the fact that some of the best looking items out there, and best sounding, are entirely vintage. Well the Vox MINI3G2CL Battery Powered Modeling Amp is one of the vintage looking but entirely modern technology employing amps that produce a great sound while looking positively scrumptious. This small amp avoids the problem of weak low tones that so many other amp have by incorporating a bass boost technology into its construction. As a result we get a small, portable amp with a handsome look and an incredibly well rounded sound, with expressive lows and expressive high both present. And the price point relative to some of the other options on this list makes it a required purchase, unless something else catches your eye that is.
Alibaba.com offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.
One master's name that kept being repeated by the guitar experts was Roger Crisler of Crisler Guitar Repair in Carrollton. He's been in the business of repairing guitars for almost 40 years. Some of the best guitarists in the DFW area turn to him when their guitar is sick: Chris Watson, Bnois King, Zach Weeks, Drew Adkins, Smokin' Joe Kubek, the list just continues to grow. He's trusted, and his work is respected. "When you love what you do, it doesn't feel like a job," he says.
High-end solid-state amplifiers are less common, since many professional guitarists favor vacuum tubes.[citation needed] Some[who?] jazz guitarists favor the "cleaner" sound of solid-state amplifiers. Only a few solid-state amps have enduring attraction, such as the Roland Jazz Chorus.[15][16][17] Solid-state amplifiers vary in output power, functionality, size, price, and sound quality in a wide range, from practice amplifiers to combos suitable for gigging to professional models intended for session musicians who do studio recording work.
The HOF is one of the single best examples of a convergence of price and quality features that we've ever been able to find. While we can't mention pricing in this article, we'd recommend clicking through and checking the retail price on the HOF, then comparing it to the other reverb pedals in this list. As far as value, the HOF is nearly a perfect 10.
Immediately you can see that this unit is on the larger side, measuring 25 inches (63.5 cm) across, and weighing about 11 lbs (5 kg). If you’re concerned about portability, we noticed one of the most purchased items together with the HD500X is this case, which comes highly recommended and will keep your multi-effects pedal safe during transit and storage. The Line 6 POD HD500X itself has superb build quality. It has a very nice metal chassis, and heavy duty construction. The build quality probably doesn't get much better than this in a multi-fx unit (we say it is a step above the Zoom G3X). We won’t spend a ton of time talking about the inputs/outputs and controls available on the Line 6 POD HD500X, since you can very easily discern that from photos of it. We will say that of all the multi-effects pedals on our top 5 list, this is the most robust. The inputs/outputs cover above and beyond what you probably need. You’ve got your basic inputs and outputs, USB 2.0 so you can use it as a USB interface and for DAW integration, MIDI in/out/thru, FX send and return, AUX input, balanced XLR outputs, integrated mic preamp, and more. In short, however you want to integrate the HD500X into your bedroom, music studio, or live setup, there’s a very good chance you’re covered.
Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.

Some effects, and the boxes that produced them, altered musical periods beyond recognition. The valve-driven Watkins Copicat, for example, will forever be associated with the sound of the late 1950s British music “beat” scene. Developed by Charlie Watkins in 1958, this odd machine supported a tape-recording mechanism that would record and play back any sound with varying lengths of delay in-between the replay heads. The device was critical to the rockabilly sound of the late 1950s, the “beat-group” sound of The Shadows, and the Liverpool Merseybeat scene of early 1960s (as well as the Birminghambeat, or Brumbeat scene). The sensation of hearing a guitar warble and wail to its own output encouraged guitarists to experiment with different styles of attack and vigor. For example, the noise that begins and ends the original 1962 recording of “Telstar” by the Tornados was made using the Copicat by creating a loop of echo and reverb effects. This produced what can best be described as some sort of space-echo/attack-helicopter noise.
CLEAR COATStew Mac sells nitrocellulose lacquer that works realy well for guitar finishing but if your like me you can't afford $10 a can for paint. Or you can check out reranchthough I haven't used any of their products they are a little cheaper. I use Deft spary lacquer. You can get it at Wal-Mart for under $5 a can and it works great. Use the same basic steps that you used when you sprayed you color coats, keeping in mind that you want enough coats so you don't cut through the clear top coat when wet sand and polish it out. Now comes the waiting. The paint has to set for several days to a month to let the solvents that are in the paint to rise to the top and harden. The paint will feel dry but you will notice that it might feel a little sticky or soft when you touch it. I like to do a "nail" test on mine. I use my finger nail and push it into the painted area in the neck pocket to see if it is still soft. No one will see the inside of the neck pocket so it's ok if you scratch it. Once it has cured completly you shouldn't be able dent the finish. It could take longer than a month for certain finishes to harden completely but trust me, you will be glad that you waited. For more information about all the different types of lacquer or clear coats products that are out there and how to choose what may be right for you, check out the drum foundry they have some great info.
{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] services:repairs","prop2":"[gc] services:repairs","prop1":"[gc] services","prop5":"[gc] services:repairs","prop6":"[gc] services:repairs","prop3":"[gc] services:repairs","evar51":"default: united states","prop4":"[gc] services:repairs","channel":"[gc] services","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] services"}
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.
I went to my local guitar store, and tested every one on the wall (under $1,000). I narrowed it down to two (the Ovation acoustic-electric of the same caliber, and this Yamaha FGX800C). In the end I ordered this guitar because of the excellent price on the "package" deal (hard case, strap, tuner, etc.). It sounds fantastic, stays in tune very well, is comfortable to play, and no "buzz". My limit of 4 stars is due to; 1) The strap is garbage...get a new one if you play with a strap. 2) The guitar only has a strap post on the rear of the instrument (it also doubles as the connection for the amplifier cord), and there is none on the front. You have to tie a string ahead of the nut. That gets in the way of the tuning and fingering of
The Mustang bass debuted in 1966 as (along with the Coronado) Fender's first shortscale bass, however the Competition finishes were not seen until 1969. It was effectively the same instrument, with sports stripes, and initially a matching coloured headstock. The competition colours were Red, Orange and Blue (although blue was officially called Burgundy). Have a closer look at this 1969 Fender and check out the soundclips through various vintage amplifiers.
How come a gibson les paul, an sg and es335 sound so different that people can tell them appart while blindfolded? If wood has nothing to do with it these guitars with the same pickups in them should sound exactly the same, yet these guitars have their own characteristics. I understand that the string in the magnettic field inducts an electric impulse thats the signal, but its the in way the string vibrates that the signal changes, like if you pkug soft or hard the signal is different, wouldn't it then be logical that the vibrating of the guitar body has an influence on the movement of the string?
Tonewood (basswood, mahogany, alder...) doesn't matter in an electric guitar unless you're getting ancient pickups for it. Older pickups used to act more like microphones and picked up sound resonating from the guitar body as well as from the strings. Modern technology has fixed that so the sound comes purely from the strings. Most guitar companies that market their guitars for tonewood are guitar brands that have been around since the times of these ancient pickups and based their marketing off of it. Most of them still haven't changed it. I recently read a scientific breakdown (experiment, analysis and all) that thoroughly proved the tonewood debate pointless once and for all. Every variable was accounted for-only tonewood was changed. So, don't worry about the basswood; it could be made from the least acoustic material on earth, and the pickups would give you the same sound as they would have on a different guitar material. I've spent months researching this in depth. (I play, too.)
what cha got yourself there partner is an awsome guitar! if you dont like the headstock you should have got the exact same but with the strat headstock and their cheaper! or you could change the neck to a blank headstock and there is a guy on ebay that will print you out a vinal sticker for it or if you have the cash get a fender neck and let people think its a fender!

The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
Choosing an electric guitar that addresses these preferences helps guarantee that new players will stay motivated as they learn to play. Musician’s Friend offers a wide selection of ¾-scale, mini, and travel guitars that are ideal for smaller, younger players. Full-sized electric guitar bodies vary considerably in size and weight, and those factors should be considered.
Emil Dopyera (also known as Ed Dopera) manufactured Dobros from 1959 under the brand name Dopera’s Original before selling the company and name to Semie Moseley. Moseley merged it with his Mosrite guitar company and manufactured Dobros for a time. Meanwhile, in 1967, Rudy and Emil Dopyera formed the Original Musical Instrument Company (OMI) to manufacture resonator guitars, which were at first branded Hound Dog. However, in 1970, they again acquired the Dobro name, Mosrite having gone into temporary liquidation.
Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Any guitar luthier will tell you that the choice of wood is the single MOST IMPORTANT factor that will determine the sound of your guitar. My junk guitar had a body that was made of cheap reconstituted wood shavings instead of actual solid wood. Junk material like that means your sound will also be junk. Any note I played didn’t sustain for more than a single second and it didn’t have that boomy lush sound you normally get from acoustics.
{ "name": "Black", "skuUrl": "/El-Dorado/Vintage-Leather-Guitar-Strap-Black-1274228084716.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-16-2018", "price": 85.00, "isOnSale": false, "msrp": 85.00, "salePrice": 85.00, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $4 back in rewards Valid through,85.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "85", "decimalValue": "00", "listPrice": 85.00, "isPriceDrop": false, "priceDropPrice": "", "promos":["freeShipping","international","return"], "warranty": false, "sku": "site51274228084716", "shipToStore": true, "displaySku": "361091000001000", "displayId": "1274228084716", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361091000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Vintage-Leather-Guitar-Strap-Black/361091000001000-00-140x140.jpg", "styleImgAlt": "Vintage Leather Guitar Strap Black", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"41079093650", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
In the early 1950s, pioneering rock guitarist Willie Johnson of Howlin' Wolf′s band began deliberately increasing gain beyond its intended levels to produce "warm" distorted sounds.[3] Guitar Slim also experimented with distorted overtones, which can be heard in his hit electric blues song "The Things That I Used to Do" (1953).[8] Chuck Berry's 1955 classic "Maybellene" features a guitar solo with warm overtones created by his small valve amplifier.[9] Pat Hare produced heavily distorted power chords on his electric guitar for records such as James Cotton's "Cotton Crop Blues" (1954) as well as his own "I'm Gonna Murder My Baby" (1954), creating "a grittier, nastier, more ferocious electric guitar sound,"[10] accomplished by turning the volume knob on his amplifier "all the way to the right until the speaker was screaming."[11]
After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.

A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.

If you already have an electric guitar and you're looking for replacement strings, carry cases, guitar stands, or other accessories, you've come to the right place. Amazon.com offers a selection of tools and accessories designed for players of every age and skill level, from beginners to pros. Look for amplifiers, cables, and microphones too—you can enjoy great selection right here online, with no need to make a special trip to the guitar shop.
The legendary ES-335 is a widely used element in practically every genre imaginable. Often equipped with double humbuckers, the ES-335’s semi-hollow body delivers a warm, woody sound. And when players like Larry Carlton or B.B. King get their hands on one, the sound can be likened closer to silk or butter. Despite being closely associated with blues artists like King, the ES-335 isn’t just a blues guitar. You can find them in the hands of just about anyone in any genre—from rocker Dave Grohl to Latino sensation Trini Lopez.

Why does the material matter less than with an acoustic guitar? Because the body of an electric guitar is much less important in producing and amplifying the sound; all it really has to do is hold the strings so they're long and tight enough to make the kind of sound frequencies we want to hear. Although resonance still plays an important part in giving an electric guitar its tone, solid-body electric guitars generate most of their sound through an entirely different process from acoustic guitars. In fact, even though acoustic and electric guitars look similar, and you play them in a broadly similar way, they are quite different instruments.
Ovations reached the height of their popularity in the 1980s, where they were often seen during live performances by touring artists. Ovation guitars’ synthetic bowl-shaped back and early use (1971) of pre-amplifiers, onboard equalization and piezo pickups were particularly attractive to live acoustic musicians who constantly battled feedback problems from the high volumes needed in live venues.[citation needed]
Aimee, by Pure Prairie League, Love,Me by Collin Ray, Where have you been, Kathy Matea, Landslide, Fleetwood Mac, The Reach, Dan Fogelburg, The Seven Bridges Road, The Eagles, Longer, Dan Fogelburg, Fire and Rain, James Taylor, Your The Lucky One, Allison Krause & Union Station, Time in a bottle, Jim Croce, Whenever You Come Around, Vince Gill, Man of Constant Sorrow, (as performed by Union Station),
The string is not the only thing that vibrates. The guitar itself vibrates, and how it vibrates depends on the tone wood. The pickups are attached to the guitar and therefore they go along for the ride. In other words they vibrate under the strings which adds to the disruption of the magnetic field. So the environment the pick ups are placed in affects the tone. A good example is Neil Young's Old Blackie, which has an aluminum pick guard on it which gives it a unique.

Other unique features of this wonderful guitar are the 70’s styled headstock logo which effectively rounds out the look of this American instrument very nicely. Weighing just 7.2 pounds, the guitar is of pure single coil bliss! It sounds great as all Teles do and it plays like a dream. For every guitar lover, this is a true workhorse instrument to get.

Thanks for your opinion Sheils. While your advice is appreciated, certainly no two guitarists would come up with the same guitars for any given list, or present an article like this in the same way. However, you did mention a few points hopefully readers might find useful. Constructive feedback, and the expression of different opinions, is always welcome.
Flat tops from 1970 to present are considered to be excellent utility instruments, but are not collectible. Staring in 1976, Martin has been undergoing many changes with numerous reissues, new models, limited editions, etc. Workmanship has improved greatly from the early 1970's, and Martin is now producing some of its best guitars in over 20 years. While not currently collector's items, these intruments have excellent workmanship, sound, and playability.
Pitch shifter and harmonizer: A pitch shifter (also called an "octaver" for effects that shift pitch by an octave) raises or lowers (e.g. "transposes") each note a performer plays by a pre-set interval. For example, a pitch shifter set to increase the pitch by a fourth will raise each note four diatonic intervals above the notes actually played. Simple, less expensive pitch shifters raise or lower the pitch by one or two octaves, while more sophisticated and expensive devices offer a range of interval alterations. A pitch shifter can be used by an electric guitarist to play notes that would normally only be available on an electric bass. As well, a bass player with a four string electric bass can use an octave pedal to obtain low notes that would normally only be obtainable with a five-string bass with a low "B" string.
The Thunderhead had two humbuckers, gold hardware, a master volume with two tone controls, a pickup blender knob, and a phase reversal switch. Some had DeArmond pickups with metal covers, a large black insert with nonadjustable poles, plus six tiny adjustable pole screws along one edge. The ebony fingerboard was bound with diamond inlays and had the characteristic “mustache” on the end of the fingerboard. The tops and backs featured figured maple laminates. Colors options included a wine red, sunburst natural, and green (on Thunderhead only). The Thunderhead K-1360 had a trapeze tail, the K-1460 a vibrato. The Tornado (K-1160 with trapeze, K-1260 with vibrato) was a downscale version with plain top, chrome hardware, two volume and two tone controls (no phase), and the Schaller pickups.

Single coil pickups utilize a single magnet. They also typically have a lower output than humbucking pickups, which means they aren’t capable of producing as much distortion as a humbucker equipped guitar. However, because they’re not intended to be used with extreme levels of distortion they have a very rich and musical voice when played with lower amounts of gain.
Condition, condition, condition! Yes, here's a Harmony H-45 Stratotone. She's a time capsule for sure. 1960's single DeArmond Pup Chambered Body. This baby wasn't played much and is a solid 9 in today's standards but a 10 being about 50 years old. No wear with just a very few small dings, (see if you can really see them). This guitar is a must with both Atomic Solar Patterns. Sounds great with no issues. $999.99
At £499, the MBC-1 is designed to hit a completely different price point to the Muse genius's full-fat Manson models, and although still designed by both Matt and Hugh, it's made in Indonesia by guitar-making giant Cort. Price aside, a quick strum lets you know this is a Manson through and through: it rings like a bell, the sort of acoustic response you'd expect from a quality guitar, but not always at this price. In style, the MBC-1 is a pretty accurate repro of the instruments used by Matt. That big upper shoulder won't be to everyone's taste, but in playing position, it's not only lightweight (3.52kg) but with forearm and ribcage contours, it fits like a glove. And the bolt-on maple neck feels superb, too, with a deep C profile and sloping shoulders that tell your hand it's thinner in depth than it actually is. Unusual at this price, too, is the compound radius fingerboard, which flattens out as you move up the neck; with tidy jumbo - but not over-tall - frets, it's a fast, fluid player, as well, which makes it one of the best electric guitars for hard-rock players. Pickup-wise, we have a fairly hot Alnico-powered humbucker at the bridge and a single coil at the neck. Along with a master volume, tone and three-way pickup selector, the upper shoulder also holds a kill button for stutter effects.
The electric guitar setup routine is as important to your sound as any component on your instrument. In addition, if you learn how to setup your guitar correctly you can save some money by not running down to the local guitar shop, and paying them to do it. I want to preface that I am not an expert on the building of guitars. I did not go to the "Fender/Gibson school of Luthier excellence". I am however someone that's built a dozen electric guitars, and have setup everyone of them. Additionally I've setup probably fifty more guitars, including acoustics, for friends, and friends of friends, who found out I've got some practical experience in the matter.
Next in line after pitch shift/harmonizer and envelope follower effects are pedals that directly interact with the pickups’ output levels, such as vintage fuzz, treble booster and Octavia/fuzz octave pedals. As with the dynamic filter pedals, placing any other effects that compress the signal in front of these pedals will limit their overall performance.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).

Combining Reverbs: You don't have to generate all of the reverb sound from a single plug-in, and using two different reverbs can also help you to save CPU power. For example, though a nice convolution reverb gives a good, believable sound, long impulse responses tend to eat up CPU. By using the convolution reverb for the early reflections, and then using something like Logic 's Platinumverb or Waves Trueverb to add the reverb tail — which is less critical to our perception of the sound — you should get a convincing but less processor-intensive result. Matt Houghton
I am a beginner player and I am a bit disappointed in both Fender and Gibson. Both entry level guitars suck, for beginners like me. Why not they make the fret board neck nut a little more wider so that its easier for learning. In the last 5 years playing both Fender Starcasters and Gibson Maestro, I cann’t play chords properly. I am still looking for entry level guitar for my chord practice without breaking my budget ($700).
Gauge the target volume of your amp. For home recording, it may not be possible for you to record your wicked guitar solo at the volume you need without being interrupted by family, neighbors, external noises, or a visit from the police due to a noise complaint. If your location is not conducive to recording at your target volume, you might consider:
I have a Mahar bass, the one with the epic (haha) zebra stripes. My wife won it at the state fair in Puyallup throwing balloons or something. She thought it would be cute to have it in my collection. I'm a drummer, but I don't want to miss out on the fun of collecting guitars, why should guitarists have all the fun? Anyway, about the Mahar guitar... it's actually not bad! I pick it up and play it once in a while just for giggles, and have had bass players jam on it. They agree. For throwing some balloons, it's a bargain! Plug it into a decent rig and it doesn't sound bad either. I suppose if you are a virtuoso it would be notable if you had issues with it, but for fun and games it really is better than a toy, like First Act or some junk like that. If you are a beginner, this would be ideal. It plays nicely, and sounds as good as your rig can make it sound. Thumbs up!
ASSEMBLE Now you can put it all together! By this time you'll be so excited you'll forget about the electronics and start to string in up before you get the electronics in but it's ok, we'll get there. Start with bolting on the neck in the same fasion that you did when you test fitted everything. Then follow that with the tuners, bridge and pickups. Don't forget to run the wiring for the pickups when you put them in.
What does all this have to do with guitars? Crudely speaking, the metal strings of an electric guitar are a bit like dynamos: they make electricity when you move them. Under the strings, there are electricity-generating devices called pickups. Each one consists of one or more magnets with hundreds or thousands of coils of very thin wire wrapped around them. The magnets generate a magnetic field all around them that passes up through the strings. As a result, the metal strings become partially magnetized and, when they vibrate, make a very small electric current flow through the wire pickup coils. The pickups are hooked up to an electrical circuit and amplifier, which boosts the small electric current and sends it on to a loudspeaker, making the familiar electric guitar sound. Usually, the amplifier and loudspeaker are built into a single unit called an "amp."

Ibanez is a Japanese guitar company that started out making outstanding copies of classic guitars, and has gone on to be one of the most revered guitar builders in the world. This is one of the top brands of heavy rock, and Ibanez instruments are known for the thin, fast necks and outstanding build quality. They’ve also led the way when it comes to 7-string guitars.
I have inherited a heater "H300N" acoustic guitar but I can't find any info on it. The most I could find is that it was from the L. D. Heater Music Company that was based out of Beaverton, Oregon. They were best known for being a distributer of Lyle Guitars. Can anyone else offer additional information or where to find it? It's a bueatiful guitar and I want to know more info before I give it to my nephew or sell it.
Modulating Offset: The output of solid-state amplifiers is directly connected to 2 DC power supplies through the output transistors. The instantaneous non-symmetry within the music waveform (particularly from the bass notes) is averaged as a modulating DC offset. This modulating offset is small, but it varies the efficiency of the speaker, introducing inter-modulation distortion, amplitude modulating the music. This problem is mostly eliminated by the trend to use an active sub-bass. In valve amplifiers the output transformer isolates the speaker from the amplifier electronics. No modulating offset can be produced.

Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."

More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
While tube technology is still considered state-of-the-art in countries where a potato is regarded as a square meal, these days solid-state and digital amps offer excellent tone for a lot fewer bucks, and with fewer maintenance headaches. However, tube tone is still considered the standard by many top players. Take a blind listening test, and let your ears be the judge.
{"eVar4":"shop: amplifiers and effects","pageName":"[gc] shop: amplifiers and effects","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: amplifiers and effects","prop1":"[gc] shop: amplifiers and effects","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"amplifiers & effects","prop5":"[gc] shop: amplifiers and effects","prop6":"[gc] shop: amplifiers and effects","prop3":"[gc] shop: amplifiers and effects","prop4":"[gc] shop: amplifiers and effects","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
I took it into a local shop to have it looked at, turns out the neck was warped, leading to problem #2 above. I ended up returning it and ordering the same model from a different retailer; although the new guitar didn’t have the same neck problems I ended up having to replace the bridge with a Mastery Bridge (see issue #1, above, the Mastery Bridge cost me another $200 or so, including labor for installation).
In this article you will learn the basics of guitar effects pedals so you will be better prepared to choose the right analog stomp boxes and digital effects to complement your sound. I’m not going to spend too much time on the science of how effects boxes do what they do. But I will do my best to explain, in plain English, the basics of each effect.
Beavis Audio Research – started in 2005 as a hobbyist site to share information on DIY guitar electronics. From the initial few pages of questionable designs, it has grown to a popular place for DIY freaks to visit and learn. Along the way, beavis has evolved into a small company. They strive to advance the DIY ethic and provide resources, tools, kits and products to the worldwide community of gearhounds.
With the massive range of options available, you'd have to spend the whole day here to go through every one. There are six and twelve-strings, models specifically made for beginners, limited edition double necks; you name it, you'll find it! For a real classic, strap on a Rickenbacker 330 electric guitar. A staple in 60's mod culture, the unique hollowbody construction, slim neck and contoured body make the Rickenbacker 330 so easy to play that it has held the status as one of the all-time greatest guitars for decades.

Some single cabinets use mixed speaker sizes, although this is less common. Examples include MESA Engineering's 1x15"/4x10" cabinet,[8] Peavey's PVH 1516, which has 1x15" and 2x8" speakers.[9] and Traynor's TC1510 combo, which has 1x15" and 2x10". Other large single cabinets with speaker sizes other than 10", 12" or 15" are less commonly used, but they do exist. Examples include the 6x8" and 8x8" cab configurations. Users of two cabinets may use two 4x10" cabinets (more easy to transport than a single 8x10" cab), a 15" cab and a 2x10" cab, or other variations (e.g., a 2x15" cab and a 4x10" cab).

Now, I'm sure that you're all sensibly busying yourselves with making music, so your lives are, frankly, too short to be sifting through more than a half a million words of interviews. Therefore, I'm going to try to digest what I've discovered during this process for the benefit of those less sad than me! I'm not about to dictate which technique is 'best', though, because if reading this many interviews has taught me anything it is that people will always disagree on what constitutes a great sound. Instead I've recorded a number of different audio examples to allow you to judge for yourselves, just as I did, which techniques are likely to make a real difference to your own productions. I've peppered this article with a number of boxes giving details of these files.
If you do have lead solder, the melting temperature is much lower, making for easier connections, but remember to wash your hands after you're done, and not to touch your face while working - lead is poisonous. With lead-free solder, the rosin lets off toxic smoke, so use a small desk fan to blow it away from you while you work, and open a window if possible.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo, Ubi.com, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.

This is a beautiful example of a 34 year old Japanese crafted Ibanez acoustic guitar that has the tone and the beauty, Love the Sunburst finish on this guitar that did a beautiful job with the thin Poly finish it stands up to the test of time and still shines like glass today just have a good look. It has a Spruce top… cant tell because of the sunburst if its solid or not but will assume its laminated…. Back – Sides & neck are all very nice grade Mahogany. Fit & finish as good as a $2000 guitar of today but this beauty has well aged woods now being well over 33 years old you could spend 3 x times the money and not get a better vintage guitar . The tone is surprisingly rich and with good volume it makes an excellent strumming or fingerpicking guitar. Its playing string action is very good making it a breeze to play and fun. The neck is real nice substantial and a medium profile with a soft V it feels like a vintage Guild from the 1960's ... nice job Ibanez!...Its in very good vintage condition too with several minor doinks to its top and a couple minor on the back and so on but overall its in very good condition both structurally & cosmetically and looks very good overall. The neck's frets are still good and fingerboard and frets have been lightly polished as has the entir guitar cleaned hydrated and polished and just look at the results, a new Martin bone nut has just been fit & installed as well as new Martin Marquis 80/20 Bronze light gauge strings, nicely setup to play very well like a much more expensive guitar now. Original tuners are doing a great job to this day some 34+ years later... Here is a very good Japanese Vintage Guitar of quality for a very good price too, She is not new or mint of course it has doinks and just a couple of fine hairline checks in its top I did not see at first its very hard to see but they are not wood cracks just fine hairlines to the finish and of no structural consequence what so ever. This guitar Plays and sounds very well and will make someone very happy its condition is JVG rated at easily 8.5/10 very good vintage, neck is straight without cracks fit and finish and workmanship are all in the excellent range. Great Japanese guitar for a great price… The 1980 Ibanez V300 TV, crafted in Japan over 33 years ago. This guitar plays GREAT! .

{ "thumbImageID": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "defaultDisplayName": "Fender Special Edition Deluxe PJ Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000048792", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Olympic-White-1500000048792.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "3-Tone Sunburst Maple", "sku": "sku:site51434378852529", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple-1434378852529.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006-00-60x60.jpg", "imgAlt": "" } , { "name": "Sea Foam Pearl", "sku": "sku:site51365435327256", "price": "699.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl-1365435327256.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000-00-60x60.jpg", "imgAlt": "" } ] }
Norma branded guitars all came from the import/distribution company Strum and Drum located in Wheeling, Illinois.  Lots of people think Norma came from Norma Jean (Marilyn Monroe), but actually the Norma name came from the owner of the company, Norman Sackheim!  Norman and his son Ron began to import Japanese guitars around 1965, and continued into the mid 70s.  Initially all Norma guitars were made at the Tombo factory in Japan, but by 67 there were at least 8 different suppliers of Norma guitars!Build quality and construction really varied greatly with Norma guitars, but Norman and Ron did have a good eye for unique designs and many Norma guitars featured some of the coolest shapes of the 60s!  Just like this 4 pickup monster!  What I always liked about Norma guitars were the cool features like neat inlays and interesting pickups.  These darn things just had style!While I was in Japan in 2013, I met with the Japanese buyer of Norma guitars.  A close friend of the Sackheims, this gentleman travelled Japan during the 60s and searched out cool guitars to supply to Strum and Drum.  It was a unique arrangement, and it was simply fascinating to listen about the old days of Japanese guitar production.  When you peruse Norma catalogs, you’ll often see models come and go quickly.  And there were always lots to choose from, year to year.

Maton was founded in 1946 as the Maton Musical Instruments Company by Bill May and his brother Reg. Reg was a wood machinist, and Bill a jazz musician, woodwork teacher andluthier who had for some years operated a custom guitar building and repair business under the name Maton Stringed Instruments and Repairs. The name “Maton” came from the words “May Tone” and is pronounced May Tonne.
Bridge craft USA musical instruments presents the exceptionally designed Glen Burton GA204BCO Acoustic Electric Cutaway Guitar in Black by Glen Burton. Perfect for the beginner or the expert, the full package comes with Strings, Picks, Gig Bag, Strap, Digital Clip-On Tuner, Truss Rod and a 10 Watt Amplifier . This excellent Acoustic Guitar also includes: Flame top; Basswood back and sides Catalpa Neck and Bridge; Rosewood Fingerboard Steel String; Sealed Gear Tuners EQ: Active 4 Band 7545 .
For those students who want a simple path to good sound and don’t want to confront a wide range of tone and effects options, we recommend the Orange Crush 12. It’s a fairly traditional amp with controls for Bass, Midrange, Treble, Volume, Gain, and Overdrive (distortion). There’s nothing on the Crush 12 that can’t be sorted out with a few twists of a knob and strums of the strings.
After the Beatles 1965 summer tour, Paul McCartney frequently used a left-handed 1964 4001S FG Rickenbacker bass, as its tone was better suited to recording than the lightweight Höfner basses he had used previously. The instrument became popular with other bassists influenced by his highly melodic style, as it produces a clear tone even when played high up the neck, its deep cutaways allowing easy access to the higher frets.

T3 (2009) – The T3 shares the same body styling as the T5 with some electronic and structural differences. It is a semi-hollow-body because it has a solid center block in the body. It comes standard with a quilted maple laminated top, and has and electric style bridge. The electronics include multiple humbucker pickups, coil splitters, and push-pull tone and volume pots. The T3 is available with the optional Bigsby vibrato in the T3/B.
Harmony was the largest US guitar manufacturer between the 1930s and late 1960s. At the height of the guitar boom in the mid-1960s, Harmony was building more than 1000 instruments per day. Not only were they producing Harmony-branded guitars, there was a time when the Chicago-based factory was making guitars for 57 different brand names and trademarks. At one point, Harmony was selling 40 percent of their guitars through Sears & Roebuck under the Silvertone brand.
The USA-made variants of Jackson guitars are somewhat pricey, yet they are also custom-made. However, you can also find the same options bearing affordable price tags too. These inexpensive models come with slightly downgraded specs as they aim at the beginners and intermediate level guitarists. It means Jackson guitars provide an excellent opportunity to the metal players to choose any of the guitars that fit in their budget and meet their requirements.

Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.
As you will see, our list embraces outsiders, trailblazers, outliers, and Eugene Chadbourne playing a rake. We don’t worship “guitar gods,” but prefer our axe-wielders to be resourceful, egalitarian, flawed, and human. We’re not drawn to Olympic feats of fleet-fingered athletics, unless they’re used for unique and exploratory ends. We see the mewling histrionics of Jeff Beck as tyranny instead of catharsis. The name Derek Trucks is practically alien to us.
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
The three pickups were originally identical in their construction. With the rising popularity of using pickups in combination, Fender introduced a new feature in 1977 coinciding with the standard 5-position switch; a reverse-wound, reverse-polarity middle pickup. As the description implies, the magnetic polarity of this pickup is opposite the other two, as is the direction of the wire winding around the bobbin. This provides a hum-canceling effect (removing hum induced by poorly shielded, medium to high output AC devices) in positions 2 and 4 on the selector switch. This principle had been known for many years beforehand, being applied in the form of Gibson’s humbucking pickup and Fender’s own split-coil pickup used on the Precision Bass.
In 1964 Hohner released The Beatles Harmonica Kit which was sold in a blister package, much like most Hohner harmonicas nowadays, retailed for $2.95, and help what Hohner calls "bring about a new popularity upsurge of the Hohner harmonica on both sides of the Atlantic.".[6] In the 1970s Hohner began manufacturing acoustic guitars,[7] and re-producing electric guitars.[5]

Paul Reed Smith is a relative newcomer having been born just 2 years after the Stratocaster was created, and founding PRS Guitars in 1985, but in that relatively short period of time PRS have made a huge impact on the guitar world, have been used by the likes of Carlos Santana, Ted Nugent, Dave Navarro. and Mark Tremonti, are now the 3rd biggest electric guitar manufacturer in the USA, and have earned their place among the best electric guitar brands.
I had a similar problem and went with a similar solution - the Vox Tonelab amp modeler and multi-effects unit. Has a headphone out that works fine for practice. Plus it is working well for gigging as well. I can practice tunes with the exact amp and effects that I'm going to use. When I get in front of the guitar amp, I just need to get a clean sound and give it a little color in the tone. It isn't perfect for gigs, but it is SO easy to practice with and can sound like a Fender, Marshall, Hiwatt, Mesa - whatever. This is starting to sound like an ad, so I'll stop. :-) – Anonymous Jan 18 '11 at 10:47

Born in Australia, Stephanie Jones is one of most promising guitarists of young generation. She started to learn guitar at Wembley Primary School in Perth when she was 11. In 2010 Stephanie started her studies at the Australian national University and she graduated with First Class Honours in 2014. After winning several guitar competition, Stephanie was awarded an Australian Music Foundation Scholarship, which included a performance at Wigmore Hall in London. She has performed extensively including two Australian tours, a New Zealand tour, and with the Weimar Guitar Quartet, a Germany tour. Currently Stephanie is studying a Masters in Classical Guitar Performance with Thomas Müller-Pering at the prestigious University of Music Franz Liszt.
The use of "full range, flat response" (FRFR) amplification systems by electric guitarists has received an extra impetus from modeling amplifiers. Before widespread availability of modeling, guitarists did not commonly plug electric guitars straight into PA systems or powered speakers, because most genres relied on the tonal coloration of a regular guitar amplifier setup—from the preamplifier, equalization filters, power amp, guitar speakers, and cabinet design. The FRFR approach assumes the tone is shaped by sound processors in the signal chain before the amplifier and speaker stage, so it strives to not add further coloration[20] or dedicated combo-style amplifiers with a broad frequency range.[21] Such processors can be traditional guitar effects, a modeling amplifier (without power amplifier), or a computer running tone-shaping software.[20] Using a modeling amp or a multi effects pedal used with line level output, a guitarist can plug in the guitar into a flat response mic input or into a keyboard amplifier.

Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
An effects pedal signal chain is simply the order in which a series of pedals are connected. If you have ever seen a player use a pedal board, the order of his pedals make up his signal chain. And if by some chance you thought that you can simply place these pedals in any sort of order and still get the same results – think again! Even if you’re just working with two pedals, you will get a different sound depending on the order.
POWER – amps are created for amplifying the sound (duh) in the first place. Of course, nowadays amps are these versatile things that can do pretty much anything but cook you a scrambled egg (maybe SOON?). But power is expensive. This might sound like some deep statement I make as I look into the sunset but what I mean is wattage is not a cheap thing to come by. That is why most inexpensive models or practice models (which are often the same) do not have a lot of wattages. While this might be disheartening, trust me, as a beginner you won’t need a lot of watts. I mean unless you are a prodigy you will be spending a lot of time practicing on your own whether it be in your room, basement or wherever. You won’t be needing the wattage that much unless you are playing with other instruments or on stage. AND if you are going on stage, then you should be great enough not to need a practice amp, in the first place.
Everyone has an opinion on Crate amplifiers. Some guitarists are strong supporters, if for no other reason than a fond recollection of a Crate as one of their first amps. Others aren’t as impressed. While it’s true that many Crate models are geared toward beginners and intermediate guitarists, they also have plenty of pro-quality gear in their lineup.
2. Do your saddles have notches cut into them? If not, then I suspect they could do with some (or if they have, but they're extremely shallow, perhaps they need deepened a little). Just note, however, that this is very easy to screw up and should probably be done by a tech if you're in any way unsure about doing it yourself. Also, you can't just cut a notch in one saddle. You would have to do all of them to the same depth, then raise the bridge a little to make up for the depth you just removed.
While it’s not the most refined thing out there, Jackson Pro Series SL2 is definitely a force to be reckoned with. Minimalist design combined with bulletproof components is the type of recipe you want if you’re looking for a solid guitar. Playable, with great tone, this Jackson definitely spiked my interest in the brand again. Best of all, it’s reasonably priced considering what it offers.
Have you ever looked at a hollow or semi-hollow guitar on the wall at your local music store and wondered how the heck they get the electronics in there? The short answer: it’s do-able, but not easy. In fact, it’s widely considered to be one of the most difficult jobs in the wide world of guitar maintenance. My tech charges extra for doing electronics work in a hollow-body, and he’s definitely not the only one.
Here’s a fairly comprehensive listing of all Supro guitars and amplifiers. As always, treat the dates with a certain flexibility, but these (for a change) should be pretty close to accurate. In some cases – e.g., the Clipper/Supreme Hawaiian, where the fundamental model stayed the same – they are listed in consecutive order following the original entry to emphasize the continuity. Also, certain salient details are included in parentheses, especially where these can help distinguish model changes. I’ve made no attempt to be comprehensive on these details.
Squier model Telecasters are sold by Squier, a Fender-owned import brand. These can bear the Telecaster name, since Squier is owned by Fender. Squier guitars, especially the Telecasters, have gained popularity[citation needed] and a good reputation amongst guitar players,since it has expanded its production of guitar models.For example a 1989 Korean Squier Telecaster made in the Samick factory could be considered tonally superior[citation needed] to a modern American produced guitar besides necks being more comfortable in general.Template:Citation neede Squier has a wide range of different Telecaster type guitars available, from the entry-level Affinity Series to the better quality Standard and Classic Vibe Series. However, Standards are often used by beginners. Also available are the Artist Series and Vintage Modified Series. Among other famous musicians, Sheryl Crow has occasionally used a Squier Telecaster for recordings and live performances.[4][dead link]
Even with such a lightweight configuration, the Fishman F1 system is still more than capable of rendering the tone of the DCPA4R with a great deal of accuracy due to the superior tight focus on the preamp. This guitar is our pick for the top acoustic electric guitar if price is no object. There are many other awesome models out there and we urge you to check them out as well, but you'll likely find that your search could have ended right here.
Now, as others have mentioned, there is a switch that controls which pickup (or pickups plural) you want to use at any given moment. Seeing as each pickup is placed at a different point under the strings, the vibrations are slightly different. The closer the strings are to the bridge at the bottom, the more 'narrow' and intense the vibrations get. Thus the current generated from the magnets lead to different sound characteristics.
The list is leaving off some HUGE names. You absolutely cannot leave out Clapton and Van Halen. However, you apparent uninformed people saying that John Mayer shouldn't be on the list should wake up and get in your music. He is on track to waxing this whole list by the end of his career. Clapton is practically handing him the torch. But then again, I guess that Tiger Woods will never be as good as Jack to some.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
A common complaint with the Bullet Strat among our panelists was that the single-coil middle and neck pickups buzzed too much. This is the nature of single-coil pickups. The nice thing about the HSS Bullet Strat is that you do have one humbucker, and setting the pickup selector to combine the bridge and middle or middle and neck pickups will also cancel the buzz. Also, the use of a single-coil pickup in the neck position makes it difficult to get the mellow, jazzy tones that you’ll get from guitars that have a humbucker in the neck position, but we figure few beginners are looking for that sound.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 55mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 8 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Fixed - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: IBZ-8 - Pickup Configuration: H-H - String Instrument Finish: Black, White
Gibson’s offerings also differ from Fender in that they largely employ scale lengths of 24.75, resulting in a warmer, more rounded out sound that has come to characterize the brand’s output (3). Playability is also affected by the shorter scale length size, with reduced tension making string bending a bit easier. Gibson’s generally utilize mahogany in their construction, which contributes to a darker tone with increased sustain and warmth.

Most often, you will see effect pedals housed in small metal boxes on the floor at a guitarist’s feet. They are often called stompboxes because stepping on a metal button turns them on and off. Many effects boxes also include a foot pedal allowing the player to modulate the effect’s intensity or volume. Sometimes you will see a larger floor unit with multiple buttons and pedals. These are called multi-effects pedals or processors. They usually have a wide variety of different effects that can be engaged simultaneously. Multi-effects processors have grown enormously in popularity as their sounds and functionality have improved.
{"eVar4":"shop: books sheet music and media","pageName":"[gc] shop: books sheet music and media","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"books, sheet music & media","prop5":"[gc] shop: books sheet music and media","prop6":"[gc] shop: books sheet music and media","prop3":"[gc] shop: books sheet music and media","prop4":"[gc] shop: books sheet music and media","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
Guitars. Having all your guitars set up properly is an obvious essential for dialing in good tone. I like low-ish action, and for low action to work, I need to set my guitar necks to have just a bit of relief so the strings won’t buzz and rattle, and in turn choke the tone. I’m always checking the neck relief on my guitars and adjusting the truss rod accordingly.
The transmogrification of bulky, fiddly tape echo units into transistorized analog echo pedals in the late 1970s is arguably one of the greatest economies the delay-loving guitarists has ever experienced (physically more than financially). Players addicted to anything from slapback to the hypnotic sonic cloning of their Echoplexes, Copicats, and Space Echoes breathed collective sighs of relief when Electro-Harmonix and MXR introduced relatively affordable analog delay pedals. By the early 1980s there was barely a rocker going who stepped on stage without a delay pedal, and every major effects maker offered a model or two. Many players gradually decided that their old tape echoes actually sounded better than the transistorized alternatives, but for convenience sake a majority of these still stuck with their stompboxes for live work. Opinions on the tonal superiority of tape echo—and especially tube-powered versions—have become even more vehement in recent years, spawning high prices in the used market and even the recent offering of a Tube Tape Echo from boutique pedal maker Fulltone, but many still find tape impractical.
Warwick Electronics manufactured the first wah-wah pedal,[citation needed] The Clyde McCoy, in 1967 and that same year Jim Morris of Kelsey-Morris Sound developed the first octave effect, which Jimi Hendrix named "Octavio". In 1968, Univox began marketing Shin-ei's Uni-Vibe pedal, an effect designed by noted audio engineer Fumio Mieda that mimicked the odd phase shift and chorus effects of the Leslie rotating speakers used in Hammond organs. The pedals soon became favorite effects of guitarists Jimi Hendrix and Robin Trower. Upon first hearing the Octavia, Hendrix allegedly rushed back to the studio and immediately used it to record the guitar solos on "Purple Haze" and "Fire".[43] In 1976, Roland subsidiary Boss Corporation released the CE-1 Chorus Ensemble, the first chorus pedal, created by taking a chorus circuit from an amplifier and putting it into a stompbox.[44] By the mid-1970s a variety of solid-state effects pedals including flangers, chorus pedals, ring modulators and phase shifters were available.[45][46]

Ah yes, the 808. It's often used and referred to as a kick, but it tends to act more as a very low tom, as it has a pitch. This thing is the Loch Ness Monster – there tends to be more under the water. The best way to deal with a true, clean 808 sample is to work around it. It's usually best to let the 808 do its thing and to get the bottom end around it the hell out of the way. If it's a fuzzy sample or has been driven and squashed, you may need to play with things above 250 Hz, but usually live and let live is the best approach.

A common mistake that most beginners do is buying a guitar without checking the wood quality. Many sellers deceive buyers with shiny and very attractive guitars that are of very poor quality and come in cheap prices. We can help you out of this trap so that you aren’t fooled into buying a poor quality guitar. You can visit our website before you make your purchase, and read through the specifications of any guitar. By doing this you will know the kind and quality of wood that has been used to make a guitar before you decide to buy it. So ensure you check the wood quality of a guitar before you consider buying it.
This final trick is pretty cool for live use because these effects are very efficient, which means that you can have several tracks of 'racks' without straining your CPU. Go to the Mixer tab at File/Preferences/Project, and check 'Enable Solo on Selected Track'. Solo a track, and now all you need to do to call up a new sound is select a track, and the Solo will 'move' to that track. The change from one sound to another is instantaneous. Now it's time to amaze your audience!    

And that’s exactly what reverb effects are trying to emulate: the way a single instrument sounds different in different spaces and reflecting off of different materials. Many common environments that reverb units try to emulate are halls, churches, and chambers. There are some pretty unique reverbs like a particle reverb that adds special effects to make things sound more spacey, and there’s even one that attempts to emulate what we imagine a black hole to sound like.

It obviously wasn’t ideal for guitarists to permanently damage their amplifiers for the benefit of experimental tone. Nor was it practical for them to drag immovably large objects on tours. Luckily, increasing experimentation in guitar sound modification collided with the widespread manufacture of electronic transistors in the early 1960s, which replaced vacuum tubes and integrated synthetic distortion in amplifiers. As the transistor revolutionized computing, it also dramatically simplified the production of guitar effects and amplifiers, allowing compact design and portability with little overheating.
Well, sanding the bridge isn't really a standard procedure, haha. Only, to be able to get the (in my case adjustable) saddle low enough without the strings hitting the bridge I had to sand it down. This Landola is an old, but not particularly valuable guitar, so I decided to try that (and it had been severly damaged to begin with, I bought it like that just to have a go at trying to repair it)
By far the most common way to sort out this tablature selection is by artist. Some best-selling highlights include the Hal Leonard Jimi Hendrix Complete Guitar Tab Library, Alfred Led Zeppelin Box Set I-V Guitar Tab Platinum Edition and Hal Leonard Eric Clapton Complete Clapton Guitar Tab Songbook. And those are just a few examples from a library packed with hundreds of books. No matter what sort of music you want to play, there's tablature ready to teach it to you.

So what is the point of getting a small guitar amp? I mean you can get a whole lot of sound out of a medium sized amp without all of the sound issues that the small amps have. And yeah they are more ungainly and harder to lug around, but at least they have the sound and power required to handle a live performance and even band practice. Plus you can turn down the sound and practice at home just as well, right?’
Portable speaker chambers represent another viable solution. These units are thick, reinforced wooden boxes outfitted with both interior and exterior insulation, housing a built-in speaker and an adjustable microphone stand, along with speaker and microphone cable connectors. Think of a miniature portable iso-booth. They're used professionally in the studio and on stage, preventing unwanted leakage and greatly diminishing stage noise, with excellent results.

Drop A in D standard variation - A-G-C-F-a-D: Used by Mastodon on most of their first album (Remission) and on some songs on other albums. Also utilized by Periphery on the song "Zyglrox" as well as "Alpha" and "The Bad Thing." Also used on occasion by Black Label Society, who previously tuned it a half-step up, which Alter Bridge also utilizes on some of their songs such as "Broken Wings", "Come to Life", "I Know it Hurts", "Still Remains", "Breath Again", and "All Hope is Gone." Creed, Architects, and Sevendust all use this tuning tuned a half-step down on their songs "Bread of Shame", "Early Grave", and "Home" and "Chop" respectively, with the latter also tuning down a full step for the songs "Death Dance" and "Not Today". Danish industrial metal band Raunchy used this tuning tuned one and a half-step down (F#-E-A-D-f#-B) on the song "Dim the Lights and Run" from the album A Discord Electric. Wage War also utilize this tuning one whole step down for songs like "The River" and "Spineless" off their album Blueprints.
Roger McGuinn's sparkling, chordal 12-string Rickenbacker riffs on the Byrds' early hits were the sonic bridge between folk and rock – and an irreplaceable color in rock's palette: Every indie band who's more interested in beatific strumming than screaming solos owes him a debt (the striking break in "Bells of Rhymney" could be on a Smiths record). McGuinn could do a lot more than chime, however, as demonstrated by his still-astonishing psychedelic-raga-Coltrane licks on "Eight Miles High."
Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.
When Charlie Christian got on the bandstand with Benny Goodman in 1939, he single-handedly propelled the electric guitar into the mainstream. Though he wasn’t the first guitarist to plug in and play electrified, Christian’s performances as a soloist on Goodman tracks like “Flying Home” and “Honeysuckle Rose” document the first instances that the electric guitar was used effectively as a lead instrument in a Big Band setting.

THE BODY This is where your guitar starts to take shape. After you have finnished your design you will need to trace it onto the wood that you are going to use for the template or body. A solid blank of tonewood that you can get from online retailers like Catalina Guitars can run anywhere in the price range of $70 to $250 depending on what wood you use. Some people will tell you that different wood will produce a different tone. While this is true in some cases like the crisper higher pitch tone of Mapel and the warmer fuller tones of Mahogany, you probably won't be able to tell the differnce between using a lower grade wood versus a higher grade more expensive wood. The only time that I would splurge and buy expinsive wood is if I was going to use a clear finish on the body and all the other parts of the guitar were going to be high end quality parts. For my project I didn't have a lot of money, much less the expensive tools to work with to produce a result that I would want to break the bank on.
The solid body electric guitar was a major design advance introduced by Leo Fender in the early 1950s. The solid body guitar helped remedy the feedback problems of hollowbody instruments. They were also easier to make, which led to mass market production. Fender introduced the iconic Telecaster and Stratocaster. Soon Gibson also introduced their first electric guitars in a partnership with Les Paul to produce what would become the equally iconic Gibson Les Paul.
Standard eight-string tuning. Used by Scar Symmetry on the song "The Three-Dimensional Shadow" from the album Holographic Universe (album) and "Mechanical Soul Cybernetics" from the album Dark Matter Dimensions, Deftones, Periphery on "Ji", "Overture", "Extraneous", "22 Faces", "Four Lights" and "Stranger Things", by Fear Factory on "Mechanize", "Metallic Division", "God Eater" and "Soul Hacker" and by Devil You Know on some songs.
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Black", "sku": "sku:site51296155735782", "price": "129.99", "regularPrice": "159.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black-1296155735782.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000-00-60x60.jpg", "imgAlt": "" } ] }