Six-point rocking tremolo: This was the original rocking vibrato designed by Fender in the 1950s. Like the two-point tremolo, it is through-body, spring-loaded, and provides individual string intonation and height adjustment. Some players feel that because this type of tremolo rocks on six screws it provides greater vibration transfer to the top and hence better resonance.
In 1950, Leo Fender introduced the single-pickup Esquire, and a few months later released a dual-pickup version called the Broadcaster that, due to trademark issues, was later renamed the Telecaster. The Tele® would go on to become the world's first successfully mass-produced solidbody electric guitar. Simple yet elegant, it has been a show-stopper and session magnet since its debut. It’s the go-to guitar for twangy chicken pickin’ solos, which is why the iconic axe has appeared on the majority of country records over the past six-plus decades.
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
First Act is a very peculiar guitar company. They have guitars that sell at Toys R Us that will literally fall apart in your hands. They sell pedals that are a complete joke, leaving you with the impression that they must be a bad, bad joke. Then something strange happened, I did a little research and found some info that was stunning. First Act has a couple of guitar lines that are some of the finest guitars I have ever seen, heard, or even read about. They have guitars that go for $3000 plus and are better guitars than any person commenting on this board will ever have the opportunity of even being in the same room with (including myself) Who would have thought?! Go figure.
These 1950s models featured the thicker, more sustaining tone of Gibson’s humbucker pickups with the original units known as “Patent Applied For” (PAF) pickups. These PAFs were designed by Seth Lover while working for Gibson in 1955 (U.S. Patent 2,896,491), and debuted on Les Pauls in 1957. This innovation became a standard pick up design for Gibson, and subsequently, many other guitar companies followed suit, outfitting their electrics with copycat versions of the humbucking pickup altered to avoid infringing Gibson’s patent. Gretsch had their Filtertron pickups, and when Fender entered the humbucker market in 1972, it was with the radically different Fender Wide Range pickup. “Standard” humbuckers from other guitar manufacturers and third party replacement pickups from the likes of DiMarzio and Seymour Duncan were only offered after Gibson’s patent had expired.
The first great thing about this guitar is its amazing look. It has a Paulownia body with the metallic blue finish and a bolt-on construction. It comes with a dean vintage tremolo bridge which works quite well compared to others. One more advantage of this product is its cost. It is one of the most affordable electric guitars out there. It has a three-way toggle dual dean humbuckers which give you great volume and tone controls.
Maton earned international renown for their superb acoustic and electric guitars and basses, which have been played by scores of famous performers from The Easybeats to The Wiggles.[1] George Harrison owned one of their MS500 models, which were introduced in 1957 and famed British session guitarist Big Jim Sullivan owned and used a Maton ‘Cello’ guitar for many years during the peak of his career, playing it on recordings with Sarah Vaughan, Sammy Davis, Jr., Johnny Keating and his Big Band and Neil Finn from Crowded House.
I have owned Fender amps and Line 6 amps and while they have been "ok" amps, none of them come close to my newly acquired Mesa Mark V 90watt and 4� - 12 rectifier cab. Amp is super versitile and the time is out of this world. I knew I'd hit the jackpot the first time I plugged up to one. Mark V pairs nicely with my variety of guitars including PRS Holcomb sig, Fender Tele and Strat, Schecter Hellraiser, and Epiphone Les Paul. There's a tone in there for everyone, every guitar and every style of music... you just have to be willing to sit down and get to know the amp. Mesa Boogie is definitely the brand for me so I cast my vote in with them. Great company with quality amps and super friendly/helpful custom service.
Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.
I don't understand why everyone is so "Gibson is the best". They have been going downhill for years. Unless it's a custom shop job, it is hit or miss. the same with Fender. Everyone likes them because of the mystique of the players that played them over the last decades. It's a "lifestyle cult" with name recognition. If you want a guitar that plays and sounds like a Gibson of Fender is supposed to but want to be guaranteed of the quality you are receiving and spend for a fraction of the money, then get a used USA Custom Shop made Washburn. You will never look back. I say used because the Chicago custom shop has apparently closed. Anything made there from about 1993 - 2008 that looks like a competitors guitar will outmatch the competitors version every time. You will notice that it is hard to find a used custom shop Washburn around. That's because they are the guitar worlds best kept secret. The people in the know get them - at a massively reduced price - and keep them. People hang onto their USA Washurns for the most part and there i a reason for that. They are that good.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!
Ironically, the sound of certain synthetic reverbs is now such an established part of music history that most convolution reverbs come with some IRs taken from existing hardware reverb units or from old mechanical reverb plates. Also, if you have a convolution reverb, it is worth checking the manufacturer's site, as additional IRs are frequently available for download.
Hey Johnny, have just been reading your article which I found very interesting. My 11yr old daughter, a great ukelele player & an extremely quick learner, I am thinking of stepping her up to a guitar. The delimar is an acoustic or a bothie acoustic-electric, as she hasn’t established her style of music yet, thought a bothie would give her both options. Am hoping you could express some advise on what could be the best way of approaching this transition and a list of guitars to check out for her. I don’t want to be fooled and purchase a sh*t one so to speak! Greatly appreciate your time and advise. Thanks Jules
At ("GuitarBassPro"), we are committed to protecting the privacy of our customers and users of our web site located at (the "Site") . This privacy policy ("Privacy Policy") gives you details of our privacy practices, including (a) what information we collect about you when you use the Site; (b) how the information will be used or disclosed; and (c) your rights with respect to our collection and use of your data. We may modify these policies from time to time and will provide notice of any major changes by posting such notice on the Site.
Wholesale Guitar SymbolsWholesale Mahogany GuitarsWholesale Hollow Guitar EsWholesale Guitar Finger PicksWholesale Snakes GuitarWholesale Golden GuitarsWholesale Sunburst Hollow GuitarWholesale Custom Double GuitarWholesale Custom Shop Guitar 1959 Tiger FlameWholesale Ems Shipping GuitarWholesale Children's GuitarWholesale Fret GuitarWholesale Guitars LowWholesale Wood For GuitarsWholesale Red Active Guitar
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future.
Schecter PT Electric Guitar Simple and straightforward - this is an apt description for the Schecter PT, a modern-day version of the guitar that Schecter custom-made for The Who’s Pete Townshend. The Schecter PT has a no-frills yet tasteful look with a vintage vibe. An alder and maple tonewood combination delivers a bright and even tone, and you’ll find the price too hard to resist.
As mentioned above, the versatility of multi-effects require complexity, and complexity requires longer learning curves. Thankfully, manufacturers have been continually improving the control interface and workflow of their units, so its never been easier to setup multi-effects units. Bigger display screens and good control positioning are important, but they also add to the overall size and bulk, so don't expect them on smaller units. Some even go as far as adding small LED scribble scripts to the footswitches, which removes the need to memorize or list down your presets.
A plucked string has many modes of vibration which all occur simultaneously; most of these correspond to overtones or harmonics of the fundamental frequency of the vibrating string. Near the center of the string, the fundamental frequency has the largest amplitude; a pickup at 1/4 of the length of the string will be at the point of maximum amplitude of the second harmonic and at a null point for the fourth harmonic. This position gives a strong, full, mellow tone. A pickup at 1/8 of the length of the string (closer to the bridge) will be at the point of maximum amplitude of the third harmonic, and will also get a lot of the fourth and fifth harmonics. This gives a much brighter tone. The change in tone caused by plucking the string close to the neck versus close to the bridge is based on the same idea: bringing out the harmonics in the string in different proportions. See link to a related article, below.

Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Dot - # of Strings: 7 - Scale Length: 25.5" (65cm) - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch, Grover Tuners - Pickups: Dean - Pickup Configuration: H-H - String Instrument Finish: Metallic Cherry, Metallic Black, Transparent Red
Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.
Okay, maybe you’re not so ambitious and simply want to bash out a decent tune around a campfire. That’s fine — just be warned that doing any John Denver stuff hasn’t been considered cool for a long time. If you are guitar beginner with a guitar in hand already then I may suggest you check out: 10 Amazing Tips to Learn How to Play the Guitar with Good Technique.
Learning guitar with no source material to work with will require many different resources, overlapped to fill the blindspots of each. Most people take lessons, but you’ll be at the mercy and pace of your teacher, with little room for your own interpretation. These days, there are apps and online lessons which have their advantages, certainly. They also come with monthly fees, though these will likely be cheaper than a live local instructor.
The signal from your pickups or pickup selector gets routed to two tone pots. The 500k pot and .022 µF capacitor provide a conventional treble-cut control. Meanwhile, the 1M pot and smaller .0022 µF cap filter out lows. (Pay careful attention to the zeros and decimal points in those cap values!) The treble cut creates its effect in the usual way: by diverting signal to ground. But the bass cut doesn’t go to ground at all—the low-filtering cap is inline with your signal. Its output goes to the volume pot (250k in the original). Clever!
A free, guided tour of the Taylor Guitars factory is given every Monday through Friday at 1 p.m. (excluding holidays). Taylor’s expansive 145,000 square foot manufacturing facility is located east of San Diego (about 20 minutes from the downtown area) in El Cajon, California. No reservations are necessary for the tour, although the company asks that large groups (more than 10) call in advance at (619) 258-1207. Taylor encourages guests to arrive at its Visitor Center, where the tour begins, 10-15 minutes prior to tour time to sign in at the reception desk. The tour lasts approximately one hour and 15 minutes. While not physically demanding, it does include a fair amount of walking.

There are two main types of pickups: single coil and humbuckers (also called double coil). Single coil pickups are comprised of a single wire coil and represent the simplest form of pickup technology. Single coils produce a bright, punchy sound, with the drawback that they tend to produce a lot of noise in form of a hum. (One way to combat this is the P90 pickup, which uses a single coil that is wider than the traditional single coil, increasing the amount of area of the strings that the pickup can hear. The result is a bigger, duller sound than the traditional single coil.) The other main type of pickup is the dual coil or humbucker, which is said to “buck the hum” common in single coil pickups. The design is essentially two single coil pickups grouped together, which creates a more powerful, richer tone that is free of extra noise. While it may seem like the humbuckers are the no-brainer option, plenty of players prefer single coils due to their brighter, punchier tone.

I use an EBTECH HUM X. I plug my Fender ’62 Re-Issue Deluxe Reverb into the HUM X and then I plug the HUM X into the wall socket. It works great for me. For my pedals, I use a Visual Sound One Spot to power my large board with no issues and I have a Boss BCB-3 pedal board/case with OD-3, CH-1, DD-3, and a TU-2 next to the OD-3 on the floor since my BCB-3 is really old it came with a 4 pin daisy chain. I power that with a Boss PSA-120S AC Adapter also with no issues. I read about keeping your signal as clean as possible and cable lengths no longer than is necessary. I would try everything mentioned above and make sure you have good quality and proper length cables. BTW, if you research cables, you may find that more expensive doesn’t always mean better. Check out Pro-Co. They are also made in the USA. Good luck!

During World War II, instrument manufacturing at Gibson slowed due to shortages of wood and metal, and Gibson began manufacturing wood and metal parts for the military. Between 1942-1945, Gibson employed women to manufacture guitars. "Women produced nearly 25,000 guitars during World War II yet Gibson denied ever building instruments over this period," according to a 2013 history of the company. Gibson folklore has also claimed its guitars were made by "seasoned craftsmen" who were "too old for war."[13][14]

Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.

There are an awful lot of boutique guitar effects manufacturers out there who make pedals designed to create all kinds of twisted and bizarre sounds. Sadly, their products are often very expensive, often prohibitively so — so what about the more budget-conscious would-be sonic terrorist? Well, one option is to 'circuit bend' more conventional (read 'cheaper') guitar effects. The basic idea behind circuit bending is that you experiment with short-circuiting the pedal until it makes a noise that you like, and then solder in a connection, with a switch or potentiometer in place if you think you may want to turn the noise off again at some point.
The Archtone acoustics were some of the most popular guitars ever produced by Harmony. While production totals are unavailable, we can safely say that tens of thousands of these instruments were manufactured. The Archtone had a non-cutaway body and was advertised as being constructed from hardwoods. These “hardwoods” were actually birch (grained to resemble mahogany and spruce) and maple (grained to look like rosewood) for the fretboard. The binding was actually painted on!
Classical guitars by Martin are equal in craftsmenship to their steel string models. But unfortunately, their sound and feel is not what classical players seem to want. Therefore they do not have the collectability of the steel string models. I group Martin classical models to include the "NY" series and gut string models made from the 1930's and later.
Some of the best guitar compositions come from simple experimentation; that's why jam sessions are so great. When you want to have your own personal jam session, using a headphone amp is a fantastic idea. That way, you can keep your genius to yourself until it's ready for its first audience. You'll have the freedom to experiment all you want without having to worry about unwanted ears listening in, and that'll give your new riff even more of an impact when you unveil it on your main amplifier.
The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 
Starting from the body, we see the standard Les Paul shape. The tonewood of choice is mahogany, as expected, but this time it comes with a maple top. The top of the guitar arches slightly just like the original Les Paul does. In terms of details, we see a white binding around the top section that really stands out on the dark matte finish.  It's something to behold.
Very cheap acoustics are usually not such a great idea. Often their sound quality is poor and they are hard to play. I often see students selling them after a six-month struggle (if they managed to stick with it that long!). So if your budget is very tight, I would not get an acoustic. You may think you save a little money because you don't need to buy an amplifier as well, but as I said before you don't have to use an amplifier to practice anyway.
Patti Smith famously described Tom Verlaine's guitar sound as "a thousand bluebirds screaming." Television's leader soaked up the flavor of favorite records by John Coltrane, the Stones and the Dead – then synthesized them into something entirely new on the band's 1977 debut, Marquee Moon, spinning out endless fluid solos in concert with fellow guitar aesthete Richard Lloyd. Verlaine has kept a low profile in recent decades, but he remains a model for generations of guitarists with a taste for both punk violence and melodic flight.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
The best guitar I've found so far is my Westone Thunder 1a, from Matsumoku factory in Japan, 1982, which I got 2nd hand for £255. This has phase switching. coil split and an integrated preamp and EQ. It's got a 3 piece laminate neck with the centre strip at a right angle to the outer strips. It's got a brass bridge, nut, and knobs. It's 34 years old and the neck is as straight as an arrow. This guitar comes closest to having everything I could want in a guitar.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.
I have an old Montclair that my uncle modified. He told me that is a '52 but the info here dates it as '60-62 if I remember correctly. I just registered over at the forum, I thought you guys might get a kick out of seeing this guitar. My uncle stripped almost all the paint, there's a bit under the bottom of the neck just to show how it was. He added a hand carved bridge and custom binding on the backside. Also there are a few other unique mods. I really am interested to see what you think about this guitar. It is my main player and has been for years now, an amazing sounding punchy guitar. Hopefully I'll be able to post up some pics at the forum. Cheers! -Gabriel-
{ "thumbImageID": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "defaultDisplayName": "Ibanez V70CE Acoustic-Electric Cutaway Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Violin Sunburst", "sku": "sku:site51418660054264", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Ibanez/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst-1418660054264.gc", "skuImageId": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Unless you get the guitar that is great for all types of venue, knowing your venue is highly recommended as you might be buying a guitar that has features not suitable or useless to your venue, not only will you be wasting great features for not using it, but you will also be paying for the said features which you will not be using anyway—not practical at all.
What equally contributes to the Entourage’s place on our list of the best acoustic-electric guitars is its nuanced and bright acoustic sound. This signature tone comes courtesy of a select pressure-test solid cedar top and wild cherry back and sides. The electronics on this model are easy to use and compact, highlighted by a pewter plate giving the entire package a stylish appearance.​

Excellent information. There is so much more to discuss on this topic. I built an Explorer shaped guitar with Strat hardware and humbucking pickups. I love the dive bombing note bends and the fat sound of humbucking pickups. I used Koa for the body and the neck came from a '70's Hagstrom electric. REALLY, thin neck. Read about guitars. See what artists like to play and why. Then fit it to your needs / wants. Brian May's Red Special uses wiring techniques I never heard or thought of. And he and his Dad made that guitar. Les Paul invented the guitar with the same name. Read about him and what he wanted. The ideas are out there to expand on. My Les Paul has 2 volume controls and a common Bass and Treble control. Different way of thinking. And it works for me.
Neck-through guitars feature a (usually laminated) neck that, unsurprisingly, extends through the entire length of the body, with ‘wings’ or ‘fins’ glued onto the sides of the body. This gives even more stability to the neck and even more sustain and resonance when played. Neck repairs are, again more difficult and costly. However, the increase in stability means these repairs are much less likely to be needed.

got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.
Most users are happy with what they got for the money, from its wood quality, to the included hardware and electronics. As expected, many of its buyers are fans of the Les Paul Jr who want to try their hand at customizing their own straightforward rock machine. Surprisingly, there are some who are happy with its default configuration, including the feel of the neck, the sound of the P-90 pickup and the quality of the tuners.
An effect made popular by guitarists like Hendrix, Jerry Cantrell, Slash and many more, the Wah-Wah effect is a pedal-controlled Q filter. The ultra-recognisable vocal-like effect is obtained by having a Q parameter going back and forth, thus “opening” your guitar voice or narrowing it down removing treble frequencies. Words cannot really describe it, and since its inception the Wah was featured on countless records. The Dunlop Crybaby is by far the most popular wah pedal, built with trusty analog circuitry. Despite Dunlop’s fame, many other manufacturers built beautiful pedals that have left their mark in music history due to their slightly different sound, such as the VOX 84x series, the Fulltone, and the super modern optical Morley Wah.

Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.
Yamaha is the most revered and leading manufacturer of full-line musical instruments. With its wide range of guitars, the company has become a best seller and is easily one of the best guitar brands in India. The C Series are the popular and affordable nylon string guitars by Yamaha suitable for beginners and young learners. The electric guitars of Yamaha available in India are of the Pacifica and RGX series. The Pacifica series offers the most value for money combining affordability with performance.
Let’s take a closer look at what’s known as the switching matrix. A switch’s poles are like separate channels that aren’t connected until you add a jumper wire between them. A SPST or SPDT switch has only one of these channels, while a DPDT switch has two. Likewise, 3PDT and 4PDT switches have three and four channels, respectively. A switch’s throws are simply the different sides of a switch. For example, a DPDT on/on switch has two channels (poles) with three lugs on each channel. Engaging the switch turns on one side or the other. When one signal is turned on, the other is turned off.
Ten is not enough. If you are not here for the first time and you already checked our article on the top acoustic guitars and the recommended electric guitars you know how we roll.And if we are going to review a lot more than just 10, why not split them into proper categories that will help you choose what is working best for you. As it will take a lot of time to write all these for you, please be easy on us. For the people that do not want to waste that much time thought and just want a quick list with some great effects we prepared the comparison charted listed below:
Again, it's a matter of personal preference and style. Many people prefer to learn on acoustic guitars, but the strings are much tougher which causes fatigue to learning fingertips. The strings produce a buzzing effect as they are hard. Harder strings mean that learning fingers will find it hard to play bar chords. On the other hand, electric guitars offer comfort while holding down chords as the width of the neck is shorter than that of an acoustic guitar. The strings on an electric guitar are softer which makes means you can practice longer without your fingers getting sore. The habit of playing with light strings from the beginning can trouble in near future as acoustic guitars are also needed in various music production situations. And don't forget, you'll need to pick up an amp and so on to play your electric guitar.
Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
The Headload may be the ultimate tool for gigging electric guitarists. It has the same features as the JDX 48, but allows the player to adjust the phase of their signal to be matched with a microphone and comes with equalization controls to further sculpt the sound of their direct signal. Most importantly, the Headload is a “load-box”, meaning that it can absorb the energy of the amp’s head and produce a lower volume through the amp’s speakers. This is crucial, since most guitarists only like the sound of their amp when it is driven hard at high volumes. Unfortunately, amps being pushed to their full volume is not as enjoyable for the audience. The Headload also allows guitarists to play through their favorite sounding amp heads without even needing guitar cabs!

Chorus pedals can provide a nice subtle doubling effect to the guitar or an extreme “watery” effect when maximized. Famous tunes that use chorus is “Come As You Are” (1991) by Nirvana, and “Brass in Pocket” (1979) by The Pretenders. But basically almost any clean guitar sound in the 80’s had some chorus on it! Certain effects are timeless such as overdrive, reverb and delay. Other effects like chorus can evoke certain time periods such as the 80’s so that is something to keep in mind when using an effect.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”

So I visit a Guitar Center, wild eyed in wonder at the vast array of choices now available. I start at the bottom end of the Strat food chain and go up. I had to reach a $1500.00 Eric Clapton Signature Model to find a guitar equivalent to the 200 dollar Mexican Strat, my dumbass had given away. (I didn’t think a 200 dollar guitar had any resale value.)
The Effect: By all standards, tremolo is one of the oldest, as well one of the simplest effects you can get these days. The whole idea behind a tremolo pedal is to give you that wave type effect by reducing and increasing the volume of your guitar’s original signal. You can adjust the speed of the effect and how deep those dips in volume are going to go.
Salas is also bullish about the guitar’s prospects. “My 10-year-old son is at school in Austin, Texas and him and his friends are rocking out to 1970s funk,” he said. “A new generation is getting into guitar and rock’n’roll. I believe there’s going to be a massive comeback and that means with that style of music the electric guitar is going to make a comeback.”
Solid Body Guitars: For those looking for a more versatile array of tones blended with the deepest number of volume options and full-blooded sustain, the electric solid body is the right machine. The differences between various types of solid body models are vast — even between an SG, the most popular model Gibson makes, and a Les Paul, Gibson’s six-string flagship. A wide variety of tone woods, including mahogany, maple, alder, spruce, maple and, commonly for the fretboard, rosewood and baked maple, are employed. They are extremely versatile instruments and have been spotted in the hands of players as wide-ranging as Les Paul and Zakk Wylde.
Tapping, in which both hands are applied to the fretboard. Tapping may be performed either one-handed or two-handed. It is an extended technique, executed by using one hand to tap the strings against the fingerboard, thus producing legato notes. Tapping usually incorporates pull-offs or hammer-ons as well, where the fingers of the left hand play a sequence of notes in synchronization with the tapping hand.

Gilmour was made famous by his haunting guitar scores in Pink Floyd. This “replacement” guitarist surpassed expectations and helped shape Pink Floyd’s unique sound. You can always expect hairs at the back of your neck to stand whenever you hear one of his solos – be it for the first or hundredth time you’re listening to it. All the emotion that Gilmour’s poured into his guitar work lives on in the music and is channeled through anyone who’s ever wanted to cover a Pink Floyd song. I know several guitar players (myself included) who whenever playing the Comfortably Numb solo – whether they are alone in their bedrooms or on stage – have always been unwillingly brought to tears, near the point of crying. How could you not expect things to get esoteric and mystical when it comes to music?

The Tube Screamer pedal has a long list of iconic users including Stevie Ray Vaughn, Gary Moore, John Mayer, Joe Bonamassa, The Edge and many more. As such, it is only expected for a company like Ibanez to take advantage of its popularity to extend their reach in the amplifier market - resulting in the creation of the Tube Screamer Amp (TSA) series. The Ibanez TSA15H leads the series in terms of ratings, with its compact yet versatile head profile while having the same combination of tube amplification and built-in tube screamer circuitry. At its core are two 12AX7 preamp tubes and two 6V6 power amp tubes, a standard configuration that sounds good on its own. Its standout feature is the implementation of a Tube Screamer circuit, which comes complete with the same controls as the iconic green pedal it is based on.
Depending on your choice of guitar kit you may be required to perform a small amount (or a large amount) of work wiring the guitar. This typically involves a soldering iron and a basic understanding of guitar electronics. You will also need to be able to follow schematic diagrams of pickup configurations. It’s not a one size fits all job either, wiring up a Telecaster is different to wiring a Stratocaster and a Les Paul or hollow body is different again.
The guitar is just a small step on being a guitar player. Having a budget friendly guitar to practice and learn with is suitable enough at this stage. The key to success really depends on how you practice and dedicate yourself on learning how to play. As long as you have a decent sounding playable guitar to begin with and has the quality that can last you in years to come. You’ll be all set.
The case was settled on August 6, 2012, with Gibson admitting to violating the Lacey Act and agreeing to pay a fine of $300,000 in addition to a $50,000 community payment. Gibson also forfeited the wood seized in the raids, which was valued at roughly the same amount as the settlement.[47][48] However, in a subsequent statement Gibson maintained its innocence with Juszkiewicz claiming that "Gibson was inappropriately targeted" and that the government raids were "so outrageous and overreaching as to deserve further Congressional investigation." Juszkiewicz continued to state, "We felt compelled to settle as the costs of proving our case at trial would have cost millions of dollars and taken a very long time to resolve."[49]
The controls are fairly conventional – one tone and one volume control, each located at the end of a neck, plus a neck selector switch. The switch is mounted on a plastic “bridge” that spans both necks. Each neck features Valco’s usual plastic nut and combination bridge/tailpiece, and the fretboards are similar to ones found on a variety of Valco steels.
Hey Frank i removed the pick guard and discovered why they were so tall.I just bought the guitar the day i asked you about it and it was late very late after midnight and i found out someone used pick guard screws to just secure them to the PG…lol And i have it back together correctly installed now.No pictures yet here is a better detailed description.The body is solid wood stained factory dark cherry.Rosewood fretboard semi-enclosed tuners…SSS P/U arrangement in a 3 ply black PG and 5 way switch and probably weighs 8 lbs.Thanks ….Larry
I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.
Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
I like some of the less known models and smaller brands. Deans are very nice, Cort has some very nice models (and cheap crap too..), Fenix LP copies (depending on the model/age) are great and I've got a Morgan strat that seems to just get better every year. Korean Yamahas are pretty nice and so are the ones from Taiwan. Korean/Chinese Epiphones vary quite a bit so try before you buy. Don't care for most Korean Ibanez and ESP/LTD models.
...Wow! I JUST bought this electric guitar from a pawn shop for 37 dollars. I could instantly tell it was a 60's guitar, so I had to have a closer look. Mine has the tailpiece clam, but it was missing the whammy bar, so my dad built me one. It didn't even work, at all. A good cleaning fixed that though, it now works perfectly. Now it's fun little piece of history.
Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:
got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.

Developed by Martin in 1916, the dreadnought shape changed the landscape of acoustic guitars. Thanks to its punchy sound, loud volume and improved bottom end, dreadnoughts quickly rose to popularity and has since been copied by virtually every acoustic guitar manufacturer. Today, if you're thinking acoustic guitar, the most probable image in your mind would be of a Martin Dreadnought or one of its many clones.
Of course you can use a pair of headphones and any number of other devices to listen to your playing - many of them will produce pleasing tones from your instrument, and even let it sound similar to what you heard playing through the amp - but without the physical interaction between the guitar and the amp, that constant feedback tone that you heard and felt will not be possible. If, instead of playing through headphones you play through a PA system, or studio monitors, or even the stereo speakers on a computer, you can regain some of that real, physical feedback, but it will be different. And every amp brings in different tones, different kinds of feedback and fuzz and distortion.
I am a beginner player and I am a bit disappointed in both Fender and Gibson. Both entry level guitars suck, for beginners like me. Why not they make the fret board neck nut a little more wider so that its easier for learning. In the last 5 years playing both Fender Starcasters and Gibson Maestro, I cann’t play chords properly. I am still looking for entry level guitar for my chord practice without breaking my budget ($700).
We don’t have many cutaway styles or Jose Ramirez guitars in our review list, but this is one of them, and it just happens to be a “hybrid,” or a classical guitar with an electronic pickup. Handcrafted in Spain, the 4NCWE model is a cedar-top with Indian rosewood on the back and sides. Like the other Ramirez guitars we have listed, this comes with a hard-shell case, so you won’t have to worry about the guitar being broken in transit.
• Gotta Feel It: Ultimately, what feels right under your fingers and sounds right coming out of your rig should determine your strings. It’s important to try different brands before zeroing in on a favorite. Judge a new set of strings by its brightness, sustain, tone and how easily they permit bending, fretting and picking. When a brand and gauge feel like buttah and sing like Circe, that’s the zone.
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
Eddie's Guitars represents the finest in boutique amplification. We have the largest selection of quality amplifiers available today. We focus on keeping up with the industry's most current builders. Stocking guitar amp brands like Fender, Marshall, Mesa Boogie, and Orange, providing completely original designs or modern reproductions of your favorite classic amps, we truly have something for everybody.

The Magnums met with a reception roughly as enthusiastic as the previous Breadwinner and Deacon. In the Carter tables it suggests that the Magnum line was redesigned to look like more conventional Fender-style basses with offset double cutaways in 1978. Other than the body shape, the 1263 Magnum III was identical to the I, and the 1264 Magnum IV was the same as the II.

Pitchshifters change the pitch of the note played via a user-specified amount. The range of pitch deviation depends on the equipment used, but many pedals are capable of raising and lowering the pitch two octaves above and below the fundamental pitch. The amount of pitch deviation can be set or controlled via a foot pedal (which typically offers smooth, continuous pitch control). Typically, such function will be used with the original signal, resulting in a Harmonizer: the pitch is altered and combined with the original pitch to create two or more note harmonies. These harmonies are typically programmed in discrete integer multiples of the fundamental tone. When used with an expression pedal, it provides a smooth, abeit slightly digital, bend-like effect. Pitch shifters can also be used to electronically "detune" the instrument. Some examples are:

{ "thumbImageID": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "defaultDisplayName": "Schecter Guitar Research Hellraiser C-1 with Floyd Rose Sustaniac Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51361806818304", "price": "1,099.00", "regularPrice": "1,099.00", "msrpPrice": "1,549.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry-1361806818304.gc", "skuImageId": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

{ "thumbImageID": "Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst/K35888000001000", "defaultDisplayName": "Breedlove Pursuit Exotic Concert CE Myrtlewood Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Bourbon Sunset Burst", "sku": "sku:site51500000124748", "price": "599.99", "regularPrice": "699.99", "msrpPrice": "865.00", "priceVisibility": "1", "skuUrl": "/Breedlove/Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst-1500000124748.gc", "skuImageId": "Pursuit-Exotic-Concert-CE-Myrtlewood-Acoustic-Electric-Guitar-Bourbon-Sunset-Burst/K35888000001000", "brandName": "Breedlove", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Bass effects that condition the sound, rather than changing its character are called "sound conditioners." Gain booster effects pedals and bass preamplifier pedals increase the gain (or volume) of the bass guitar signal. Bass preamplifiers for double basses are designed to match the impedance of piezoelectric pickups with the input impedance of bass amplifiers. Some double bass preamplifiers may also provide phantom power for powering condenser microphones and anti-feedback features such as a notch filter (see "Filter-based effects" section below).
I gave some relief to the guitar, just enough to be able to move a business card on the 8th fret. I think the truss rod adjustment is ok now. Strangely it's still buzzing. I compared the height of the bridge to my Navigator N-LP-380LTD and i have the same height on the RLG-120 the same. The string that buzzes the most is the D string!!! E and A string buzz too but less than the D. Don't know if i want to raise the bridge more. G B E are ok! Don't know if the D slot on the nut is too low. Seems like the slots on the nut on my guitar are higher than the ones on your Burny. Don't know what to do. Frets seem even. Any chance it's the saddles or something? Do they play a role on buzzing. I will raise the bridge tomorrow morning and see how it goes. Any idea what should be a standard string height on these guitars? Lets say height on 1st fret, 5th fret, 8th fret, 12th fret, 16th fret, 22nd fret. Can we say that? Can you tell me yours to check with mine?
Graph Tech Ratio Locking Guitar Tuners (3+3)   New from$118.96In Stockor 4 payments of $29.74 FREE 2-DAY SHIPPING Babicz Full Contact Strat Tremolo   New from$142.95In Stockor 4 payments of $35.74 Free Ground Shipping Gibson Vintage Tuners/Tuning Machines (Set of 6)   New from$89.99In Stockor 4 payments of $22.50 FREE 2-DAY SHIPPING Graph Tech Ratio Locking Guitar Tuners (6 In Line)   New from$118.96In Stockor 4 payments of $29.74 Free Ground Shipping See All Electric Guitar Parts
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1]

{ "thumbImageID": "Rocketeer-Electric-Guitar-Pack-Red-Burst/430930000003000", "defaultDisplayName": "Rogue Rocketeer Electric Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red Burst", "sku": "sku:site51343059402611", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Red-Burst-1343059402611.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Red-Burst/430930000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Blue", "sku": "sku:site51275425410280", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Blue-1275425410280.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Blue/430930000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Burst", "sku": "sku:site51343059402609", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Wine-Burst-1343059402609.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Wine-Burst/430930000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275425410277", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Black-1275425410277.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Black/430930000001000", "brandName": "Rogue", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Next was Eunice's ‘electric guitar’. It was beautiful and hardly used. However a common problem with guitars of this era were the horrible pickguards made from celluloid that would off-gas while in storage and then wreak havoc over the guitar’s other parts. Upon closer inspection the guitar was actually dripping wet from the many years of storage in the hard case.
Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.
First the lower line models were built for steel strings first. Like the style 17 in 1922, and the style 18 in 1924. Pretty much all models were built for steel by 1927-1929. But unfortunately there was no definative serial number or time line for any 1920s Martin style. This makes it difficult to determine if any particular 1920s Martin guitar is really built for steel strings. Martin didn't just implement steel string design at any one definative point. It was a transition, and apparently a very slow transition. And special orders for gut or steel complicated things.
The Vintage Modified Jazzmaster has the tried-and-tested dual circuitry of the original models from the ’60s. The “Rhythm” circuit activates only the neck pickup, while the “Lead” circuit lets you pick between neck, bridge and both at the same time. Each circuit has its own dedicated master volume and tone knobs. (In comparison, the Fender American Professional Jazzmasters don’t have this circuitry.)
If you’re looking for a solid start on how you will sound without settling for a tube amplifier due to its price, maintenance and back breaking weight to carry around. The Marshall MG30FX combo amp is surely one of the best out there on capturing iconic sounds, as well as the legendary Marshall tones that other brand of amplifiers frequently emulates, adding it to their bank of amp models.

“It had ‘Walking the Dog,’ ‘Route 66,’ and others on it,” Millard says. “That has tone. The reason it has tone is that it was made in the worst damn studio possible. Everyone who worked there said this was a shithole. There was no sound separation, they used lousy mics, they never cleaned it. Andrew Loog Oldham, who was the manager at that point, said that was the key to the sound.”

When the tone pot is set to its maximum resistance (e.g. 250kΩ), all of the frequencies (low and high) have a relatively high path of resistance to ground. As we reduce the resistance of the tone pot to 0Ω, the impedance of the capacitor has more of an impact and we gradually lose more high frequencies to ground through the tone circuit. If we use a higher value capacitor, we lose more high frequencies and get a darker, fatter sound than if we use a lower value.
This is a Supro Supreme Hawaiian Guitar Model 1400 from somewhere around 1945. I've seen an identical one that was purchased new by the original owner during that year exactly. That date appeals to my love of WWII history, of course, because it was the last year of the war. I found this one languishing in the back of a vintage guitar store in Williamsburg, Virginia, while my wife and I were on our 30th anniversary holiday trip. The guitar is covered in lovely reddish-brown "mother of toilet seat" and has a non-slip back.

The hollow body electric guitar rose to prominence when Gibson introduced the ES-150 back in 1936. Fully hollow body electric guitars (sometimes referred to as “Jazz Box” guitars) tend to have arched tops and large, deep bodies that allow the sound to fully resonate to produce an incredible full-bodied voice with amazing projection and depth. Jazz players and blues players really love the sound fully hollow guitars deliver. While the classic, larger-bodied fully hollow electric guitars definitely still exist, there are also a substantial amount of thinline fully hollow body electric guitars that guitar players may find to be more comfortable. Guitar brands such as Gibson, Gretsch, Ibanez, D’Angelico, Guild, and Epiphone provide guitar players with a fantastic array of fully hollow body electric guitars.