Beginning in 1960 with the T-60 solidbody, Teisco began to use the elongated “Strat” six-in-line headstock. This lasted through 1963. In 1963, the squarish Strat headstock appeared with the GB-1 solidbody bass. This seems to have lasted through 1965, but only on selected models, and with several subtle variations, including a slightly more rounded version. In 1964, probably later in the season, most of the Teisco solidbody line acquired a new hooked Strat-style headstock with four-and-two tuners on the guitars and three-and-one on the basses. This had the little hook at the throat like a Strat, and a larger hook on the tip, almost like a Woody Woodpecker plume.
Though modulated delays are essentially effects, the need to balance the dry and delayed sounds as a means of regulating the effect strength means that using these devices via insert points makes them much more controllable than trying to use them in an effects send/return loop. If you do use them as a send effect, you can achieve this balance by automating the send level.
Rule 1 - There is a logical order for groups of effects. Some effects remove or add certain amount of frequencies, some change the basic shape of the audio waveform, and others react to the shape and amplitude of the waveform. Those are three main types of effects that logically can't come in any other order than they were just listed, or you end up with amateur results. The reason for that becomes clear in the next rules.

bought at a tiny store in holland, back then they said to me the guiter was already 20 years old. he was looking a new, and bought it for 1000,- dutch guildens. thats maybe...445,- euro now. thats nothing compared to the prices they ask for a vox guitar they make TODAY! thay are building guitars again and ask pricies beginning by: 2000,- euro's. I wanna know when my guitar was bild, he has a chrome plate at the back with made by japan on it too.
"NEW-DEMO" means that we are an authorized dealer of the item and acquired it directly from the manufacturer. We consider the item to be new because it has not been sold to or owned by another customer. NEW-DEMO items, however, have been on display in an active retail music store for some length of time. As a result, these items may have been tried out by other customers. They may be dusty, have fingerprints, stick marks, pick swirl, etc. Please refer to the item's description for more detailed information. All NEW-DEMO items come with a manufacturer's warranty (where applicable), but some may not have original manufacturer's packaging. Please refer to our Appearance and Technical Condition scales below for more information about the item’s appearance and condition. 
I have my Dad's '68 Kent guitar and am looking to have it restored..any info on parts would be helpful...I think all it needs is the spring for the vibrato (whammy bar)...everything else is there...the rubber piece on the bridge looks quite worn or perhaps brittle (rightfully so). Does anyone know what this guitar is worth? It's in orange sunburst ...It's a left handed guitar
Versatile- many of the practice amps today have “AUX” (Auxiliary) inputs for your electronic music devices like your iPod, phone, or tablet computer. This is essential for learning songs because you can pipe your song from your device into your practice amp and play along either out loud or with your headphones in private. With so many music apps out today for iPhones and Android devices, you can also connect the headphone jack of your practice amp to your personal device to learn new songs and/or record your performance! Check out Ultimate Guitar Web on Google Chrome

There are a few ways to save some money on your electric guitar (click for modal analysis). One way is to order online, for example from Amazon, which is usually cheaper than buying from a physical shop. Make sure that you know what the usual price for the guitar you want is, so that you can compare different sites, and in the best of worlds, use a discount code or wait until there’s a sale.

Despite the fact that there are many great beginner guitars out there, Ibanez holds the title of owning starters designed specifically for metal. The way they have achieved this reputation is quite ingenious. They have delivered the same body style shared with their higher-end models. Ibanez GRX20ZBKN is a good example. It is a basicguitar that packs a mean punch.

Ribbon mics exhibit a figure-of-eight pickup pattern. One useful close-mike application for achieving heavy rock sounds involves a ribbon mic (or large-diaphragm condenser set to a figure-of-eight pattern) aimed toward the center of the speaker, with a cardioid dynamic mic angled next to it at roughly 90°, aimed off-center, with the capsules almost touching. Record the mics on separate tracks, and with proper balancing the sound should be powerful and frequency-rich.
Traditional sets can sometimes feature vastly different tensions between strings, causing players to compensate with altered techniques. New York string icon D’Addario set out to even the playing field with its Balanced Tension XL sets, which boast mathematically equalised resistance for a similar feel from string to string. That means even effort when bending, strumming, plucking and slapping, and even improved dynamic control.

Now, there are some basic terms in the electric guitar lingo that you need to be aware of. Below are some of the terms that you need to know before you go out and research about different electric guitars. But if you are musically inept, there are some ways you can compete with the guitar guy. If you learn some points about the electric guitar, such as terms and mechanics of the instrument, you can impress your friends and possibly even will be the guy holding the guitar at your next dinner party.
There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]
Valco manufactured Spanish acoustic guitars, metal-bodied resonator guitars, electric lap steel guitars, and vacuum tube amplifiers under a variety of brand names including Supro, Airline, Oahu, and National. They also made amplifiers under contract for several other companies such as Gretsch, Harmony, and Kay. In the 1950s they began producing solid body electric guitars.
I play in cover bands. Own large collection of pedals, some I love, some stink. Then I found out that the only people that care about the effects are other musicians. The people( girls dancing mostly) could care less. So now I got a tuner, and drive pedal for solo tone....that's it, and my tone is awesome and hassle free. For studio cats it may be a different story.

Number of Effects: All multi-effects units have a number of effects to choose from; that’s the entire point of them! However, make sure the pedal you go with has plenty of selection that will meet your needs. Typically, the more effects there are to choose from, the better. Chances are over time you’ll narrow the selection down to a few of your favorite ones. The top 5 multi-effects pedals on this list all have plenty of effects to choose from (the lowest has around 40, and a few have 100s).
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:
{"pageName":"[mf] pdp: el dorado vintage handtooled leather guitar strap","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";361014","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}

Our Parlor size guitars are approximately 25% smaller than our full size guitars but what really makes them special is they have a 2 inch shorter neck design. This means children and small adults (under 5 ft tall) don’t have to reach as far holding certain chords making playability even easier. Most of our customers buying our Parlor guitars are coming from little Martins and Taylors.  They say the Easy Play Parlor has 30-50% easier playability and sound is slightly richer and deeper.  Shipped from our workshop in Lincoln, Nebraska.  100% money back guarantee, lifetime warranty.

This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable.

Every working guitarists knows that if he doesn't have a good guitar doctor, his dreams of being a master shredder who destroys the crowd with rakes from his pick as he slides it up the string are dead. From a broken headstock to a cracked neck, a guitar technician is a master of skills. He's an electrician, a plumber, a physician and a surgeon. But if a guitarist wants to shoot fireballs out of his guitar, he'll need more than just a technician; he'll need a guitar master.
Usually, electric guitars have six metallic strings – although there are certain variants used in specific musical styles with seven or even a dozen strings (six pairs). This kind of guitar is used in all kinds of musical styles, from jazz, to metal, pop... and of course Rock'n'Roll music. Actually, the origins of the electric guitar can be traced back to the 1930s Swing-era Jazz movement, when guitarists started experimenting with steel pickups adapted to their hollow-bodied instruments, as a way to get a louder, more substantial sound than what would be possible from a regular guitar. The first commercial electric guitars came up in the mid 1940s, and by then a solid-body was already in use – thus introducing the much familiar look that's now typically associated with electric guitars.

We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.

There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out for more info.
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   

But there are more questions – are you a beginner, or do you have 20 years playing experience under your belt? Are you on a tight budget, or is money no object? Do you prefer funk, or are you a full-on metalhead? Somewhere the perfect guitar is waiting for you, and – with hundreds of reviews on this site – chances are we have featured it on these pages!
This doesn’t mean that our reviews are of no use to you, because there are so many electric guitars out there, and if you know what to look for when you get to the music shop and have a few models in mind, then that makes it a lot easier. And of course, if you don’t have a music shop nearby and need to order one online it’s always good to do your research. It’s a good thing we’ve already done that for you, then!
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.
Although I left it up to our panelists to decide what they think is most important in a beginner’s amp, we all agreed on a few parameters. First, the amp should have no glaring technical flaws—it shouldn’t produce excessive amounts of noise or hum, and it shouldn’t exhibit audible signs of distress, such as buzzes or rattles. Second, it should produce enough volume that the guitarist can jam with instruments such as piano, saxophone, and a small drum kit.
Yes, a Martin guitar under $500. The Martin LX1E features a sitka spruce top with mahogany back and sides. It carries the Martin name, which  means high quality is expected. Being that it is closer to out $500 limit, you can expect this guitar to deliver on tone. This one is a direct competitor to the Baby Taylor. People that own both have said that they like the sound of the Martin better, describing it as bright and crisp. The tradeoff is the playability is not rated as high as the Taylor. See more pictures and reviews of the guitar here.
The blues was my inspiration-specifically, the late-'40s solo recordings of John Lee Hooker. "Hobo Blues" is an excellent example of early Hooker on which his violent string slapping-clearly audible in a blend of amp sound, haunting vocals, and trademark foot stomping-creates an indelible realism and engaging intimacy. My recording of Paris Slim's "The Day I Met The Boogie Man" (see the sidebar "Selected Discography") was one of my early experiments with this technique. Since that time, I have used a discrete "air-guitar" mic whenever I have had an available track for it. Guitarists may initially be skeptical of such unusual miking, but it's always a treat to watch their faces light up as they listen to the monitors deliver the bright, transient sounds that they have been accustomed to hearing during their years of practicing their instruments.
{"pageName":"[gc] shop","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop","prop1":"[gc] shop","evar51":"default: united states","prop10":"find in stores","prop11":"knoxville","prop5":"[gc] shop","prop6":"[gc] shop","prop3":"[gc] shop","prop4":"[gc] shop","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] site section"}
One master's name that kept being repeated by the guitar experts was Roger Crisler of Crisler Guitar Repair in Carrollton. He's been in the business of repairing guitars for almost 40 years. Some of the best guitarists in the DFW area turn to him when their guitar is sick: Chris Watson, Bnois King, Zach Weeks, Drew Adkins, Smokin' Joe Kubek, the list just continues to grow. He's trusted, and his work is respected. "When you love what you do, it doesn't feel like a job," he says.
In 1950, Leo Fender introduced the single-pickup Esquire, and a few months later released a dual-pickup version called the Broadcaster that, due to trademark issues, was later renamed the Telecaster. The Tele® would go on to become the world's first successfully mass-produced solidbody electric guitar. Simple yet elegant, it has been a show-stopper and session magnet since its debut. It’s the go-to guitar for twangy chicken pickin’ solos, which is why the iconic axe has appeared on the majority of country records over the past six-plus decades.
Processing audio before it passes through an amp simulator is a creative alternative to adding effects to its output. As described elsewhere in this article, pitch-shifting can work well in conjunction with amp simulation, but other ways of editing and processing the raw guitar file before it goes through the amp modeller also yield interesting results. Reverse reverb, resonation, vocoding and Auto-Tune can all produce distinctive effects. Try chopping small sections of guitar out, for an interesting stuttering effect that's nothing like tremolo. A piece of guitar that's been reversed before being fed through an amp modeller sounds quite different to what you get by reversing a guitar part that's already been through an amp, and this technique can be very effective. Likewise, recording three or four separate tracks of single guitar notes and routing them simultaneously through the same guitar amp simulator sounds very different from playing chords. Sam Inglis

If you love the sound of both acoustic and electric guitars, but you want to play both at the same time without draping one of each over your shoulder, then an Acoustic simulator pedal is ideal. These pedals take your guitar signal – regardless of what electric guitar you’re playing and make it sound like it’s an acoustic. These are often used by guitarists on stage who want to switch between an acoustic and electric guitar sound during a set or even the same song. The Boss AC-3 Acoustic Simulator is a great option.

Amplifiers for electric guitars are more likely than bass amps to have multiple "channels", but some bass amps also have channels. By providing two or more "channels", each with its own gain, equalization and volume knobs, a bassist can preset various settings (e.g., an accompaniment setting for playing a backing part and a solo bass setting for playing a bass solo). In a heavy metal band, a bassist may use a multi-channel amp to have one setting with an aggressive overdrive, while another channel has a "clean" sound for ballads.
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
Along with the Dobro name, OMI was acquired by the Gibson Guitar Corporation in 1993. They renamed the company Original Acoustic Instruments and moved production to Nashville. Gibson now uses the name Dobro only for models with the inverted-cone design used originally by the Dobro Manufacturing Company. Gibson also manufactures biscuit-style single-resonator guitars, but it sells them under names such as Hound Dog andEpiphone. The Dobro was first introduced to country music by Roy Acuff.
Now, if you're just getting started and breaking strings every time you try to tune up because you hit the wrong octave, then start out with the cheapest strings.  Once you can reliably tune and play without destroying them, you can work you way up.  Once you have the hand coordination, your learning will be accelerated too.  The right tool for the right job, as Old Grandpappy always used to say.  The best electric guitar available will be garbage with the worst strings on the market.  Choose wisely!
This may seem like an odd value to consider, but most guitarists need to feel a certain connection to their instrument. It’s part of what makes being a guitarist different from other types of musicians; a sense of individuality as well as style. Your guitar will be a significant investment regardless of which brand you settle on, and while sound and construction are more critical factors overall, it’s important that your instrument inspires you. Different brands are known for cultivating different images; Gibson’s and Fender’s were made famous by the rock gods of yesterday, while Taylor’s unique acoustic bodies will conjure up a different vibe for a folk player. Again, this aspect speaks to your individual needs as a guitarist.

3) The pedal switch. Placed on the top of the pedal, pressing it with your foot turns the effect on and off. This is where the name “stomp boxes” comes from – you “stomp” the box to turn on the effect. Pedals are most commonly placed on the floor next to each other so they can be toggled with your feet while you play with your hands, but larger units are often placed in large racks on top of one another, as otherwise they would take up too much floor space.

AmpliTube's effects are as noteworthy as its amp modeling capabilities. The current version comes with up to 51 effects - modeled after rare vintage gear like Ibanez Tube Screamer, Arbiter FuzzFace, MXR Phase100, MXR Dynacomp, Electro Harmonix Memory Man and many more. What sets AmpliTube apart from the competition though is its very intuitive interface. No parameter is more than two clicks away, and its realistic looking graphics are extremely easy to operate - even allowing for drag and drop operations. If you want a quick setup software, AmpliTube is your best bet. Price: usually about $200 - Check out for the latest price and reviews
MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.

In 1958, Gibson made a radical design change to their Junior and TV models: with the design change came cosmetic changes to these guitars that would later take on enormous importance. To accommodate player requests for more access to the top frets than the previous designs allowed, Gibson revamped both these electric guitar models with a new double-cutaway body shape. In addition, the Junior’s fresh look was enhanced with a new cherry red finish, while the re-shaped TV adopted a new, rather yellow-tinged finish for its new design.
Along with these effects are 10 guitars: Strat Marshall, Valve ODX, Garcia Guitar, Bleeding Guitar, Blues Guitar, Power Guitar, Mondo Guitar, Synth Guitar, Clean Guitar, and Electric Sitar. The sound of each somewhat matches the guitar it’s supposed to be, but more importantly, there is a notable change in tone with each and since it’s free, I was happy just to have that.
I keep coming back to this point because it’s absolutely essential: learn how to solo over chords. I don’t mean simple chord arpeggiating, even though that has its place, too. If you can follow the chord changes with smooth, soulful playing, you will never be fenced in. You can drop into any style, any band, and any situation. Most of us get stuck playing a given scale pattern for years before something shakes us up. Make this the foundation of your learning with this book.
This is our new cross-reference between classic pedals (e.g. a Fuzz Face) and who makes kits or boards to build it yourself. In some cases the kit or board is for an exact clone. In others, it is for a circuit based on the original but with improvements or combinations with other pedal designs. Read the description specifics by clicking the link and visiting the maker’s site.

NEW ARRIVAL SORRY SOLD OUT QUICKLY ...She's super clean Genuine Ibanez Hoshino Factory release this is a cool collector piece of Japanese Law-suit modle guitar history WoW is this well made guitar Beautiful in person just impressive . This vintage J200 is now over 39 years old that plays with ease and has a HUGE SOUND... really sweet beautiful tone that rings out pretty loudly and its playability makes this guitar fun to play and an excellent choice in your next cool Japanese Vintage guitar... she's in better than average cond too well taken care of Adult owned right here in California she's in top form folks. With its Nice medium slim taper flamey maple neck 1-11/16ths at the nut. Classic beautiful original pick guard looks exactly like the old age Gibson, the detailed workmanship fit & finish you will be sure to notice and love. Ready to tour or record tonight! every time you pick it up to play. TO SEE THE PICTURE GALLERY OF THIS GUITAR CUT & PASTE THIS LINK THEN CLICK OR RETURN:

This company specializes in guitars meant for heavy metal and hard rock lovers. It is the proud manufacturer of some of the most outstanding designs in the history of metal such as Warlock, Bich, Virgin, and Mockingbird. It molded and influenced hard rock and thrash revolution of the 1980s. It is a great choice if you are looking for some edgy designs for your guitar. The guitars are available in 6, 7, or 8-string models that are suitable for players of all genres. Their recent introduction was the Villain series that has incredible designs and has a body of basswood or mahogany.

There are also companies like Eastwood Guitars that are releasing their own versions of the Hi-Flier. Available for a pretty low sum, you can get Eastwood’s recreation of a Phase 4 Hi-Flier in both right-handed and lefty configurations. If you don’t find the world of vintage guitars too appealing, but you dig the look and feel of the Hi-Flier, this might be a prime option for you.
The C-series archtops were long scale until mid-1934, same as the 000 models. Sometimes a C model is converted from an archtop to a 000 style flat top. A conversion of a short scale C-2 (mid-1934 and later) won't exactly be a 000 either. The neck must be shortened to get the shallower angle required for a flat top. This amounts to about 1/3 of a fret, so the guitar ends up having a 13 2/3 fret neck. This puts the bridge position a little lower on the top, closer to the OM bridge position (but not exactly the same). The other feature on the C models that is different from a 000 is the back arch and the back braces. The archtops have more arch in the back and taller #3 and #4 back braces. Note the 1939 and later C-2 models have no abalone, the neck inlays are pearloid.
* P A W N S H O P * G U I T A R S * Serving The World With Quality Vintage and Used Gear!- Up for sale is a 1960'S Norma Guitar Japanese Vintage Project As Is!- Good Japanese project- missing nut, bridge, knobs, electronics need work, but pickup is ok- very noisy- lots of body checking and neck needs work- truss barely turns- missing tuner ferrules- head stock logo is loose- even if I forgot something this item is sold as is with no returns!- this is definitely a worthy project- from the MIJ Hay... more
Schecter PT Electric Guitar Simple and straightforward - this is an apt description for the Schecter PT, a modern-day version of the guitar that Schecter custom-made for The Who’s Pete Townshend. The Schecter PT has a no-frills yet tasteful look with a vintage vibe. An alder and maple tonewood combination delivers a bright and even tone, and you’ll find the price too hard to resist.
Did I say WoW....your going to love this one...Here we have a VERY rare GREAT FIND and premium example at that this over 35 year old vintage mandolin has absolutely beautiful flamed AAA Fiddle grade Maple to both the back chevron 2 piece & sides .... this piece is simply gorgeous and has an aged & wonderfully grained figured Sitka spruce top this a VERY High Quality. This is a Japanese made Artist grade Mandolin from the prime Japanese Law-suit era ... the very talented Luthiers built this example... this one was made in the mid 1970's at the famous Ibanez factory in Japan this example is cleverly labeled with a beautiful mother of pearl logo then unheard of " CARLO ROBELLI "... This is a Gibson exact REPLICA of the " F Style " MANDOLIN this M-700 M700 ACOUSTIC Mandolin in excellent vintage condition WoW! its so nice dare I say Near Mint...its over 30 years old and has that aged and mellowed tone and has emerged as a great sounding professional quality constructed PRO level beauty that is available for a fraction of what the very same vintage Ibanez or Aria m-700 Logo'ed Mandolin will cost... ( same factory built those to ) same luthiers same materials... as seen with the great original golden plush lined hard shell case.. all & all one of the best sounding & playing mando's available under $1600.00 vintage F style and beautifully flamed & figured Maple ..looks like old school nitrocellulose lacquer but no visible checking cracks but just one short 3" finish check on back and is almost impossible to see... a few buckle mars on back but so faint not threw finish and again almost impossible to see... guard is also in top shape not all scratched up..this baby is in under the bed for 30 years condition it looks more like its one year old condition wise as it is actually 30+ years you can tell the finish has that aged patina and warm appearance of a vintage Mando.. here is a great one w/ its original hard shell case ..WoW! Its being cleaned up now and is looking as new... the guard's glue just came loose so it will get cleaned prepped & re-glued and ready for another 30 years. I will also be restring her with a new set D'Addario strings we have in stock and set her up... she will ring like a sweet bell and be ready to record with or tour. Copy & paste this link to view many new pics of this beautiful Vintage Japanese crafted Mandolin...

Byrd recommended Kaman show his guitar to folk singer Josh White, who was performing in town at the time. Kaman promptly did so, and for White, it was love at first strum. He enthusiastically agreed to have an Ovation guitar made to his specs, and became the first Ovation endorser, in ’66 and brought his entire family to Connecticut to pick up his first guitar, playing the first Ovation concert with his new guitar. Byrd did eventually get a classical guitar from Ovation, and performed with it for many years.
Ostentatious Delays: If you're making very rhythmic music of any kind, it makes sense to use tempo-sync'd delays, to avoid undermining the main pulse. However, simple tempo-sync'ed delays tend to be masked by the main rhythmic stresses, so they sink into the background of the mix unless mixed very high in level, which makes it difficult to create ostentatious delay effects in rhythmic music without swamping your mix. One solution to this problem, very common in trance music, is to set a delay to a three-16th-note duration, which means that although the delay repeats never step outside the 16th-note grid, they'll often miss the main beats and therefore remain clearly audible. Mike Senior

This fully analog simple plug and play guitar amplifier is enjoyable to play with. It has a switchable clean and dirty channel with separate volume knobs that shares a 3-band EQ treble-mid-bass and gain control to add more grit so players can arrive on a crunch and lead sounds. Other useful attributes on the amp are set of input jacks for a headphone and audio source to play along with a backing track.

The Blues Junior's compact dimensions, light weight and pedal-friendly credentials have made it one of the most popular gigging combos in the world, but for 2018, Fender has updated it to the new Mark IV specification, which features various tweaks, including Celestion’s excellent A-Type loudspeaker. Controls include gain, bass treble and middle, reverb level and master volume, with a small push-button ‘Fat’ switch. In use, the Junior unleashes a stunning range of Fender tones, from spanky, sparkling cleans, to fat and smooth midrange crunch that’s spot on for blues and classic rock. The Fat switch adds a generous midrange boost and can be remote-controlled from a footswitch for greater versatility, while the improved reverb circuit is very impressive, with no noise and a smooth, warm delay that feels more integral to the overall amp tone, harking back to the best blackface reverbs of the 1960s. No matter what guitar you use, the Blues Junior flatters single coils and humbuckers alike, not to mention drive pedals with plenty of volume. The sounds are top-drawer, comparing well against many so-called boutique amps costing four times the price. Factor in the compact dimensions and light weight, and it’s easy to see why the Blues Junior remains a firm favourite.
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
The Squier Bullet Strat Hard Tail Brown Sun Burst is a fantastic option for beginner guitarists out there and those who need an affordable budget friendly option for recording or practising. This guitar makes our cheap electric guitars that don’t suck list thanks to its high-quality basswood body and comfortable “C” shape profile on the neck that is super comfortable to play. This high-quality guitar also includes a set of three standard single-coil strat pickups allowing you to mix up your sound via the 5-way pickup selector. Solid, chrome hardware and a hard tail bridge for added resonance finish off the guitar nicely whilst the budget friendly price tag makes it affordable for everyone. A Fender Stratocaster style guitar at a fraction of the cost.

Reverb pedals come with all kinds of different layouts. Even so, some of the controls are virtually universal. The first one we would like to mention is the dry/wet knob. This control is what you use to mix your original signal and the effect itself. When the knob is turned all the way to dry, there will be zero reverb present in the signal. As you move towards wet, the amount of reverb increases.

As an active musician in Los Angeles, I often hear guitarists marvel at how good the latest Squier by Fender guitars are for the price. The Squier by Fender HSS Bullet Strat is no exception. A few minor complaints aside, it’s simply a well-made version of a decades-proven design at a very affordable price. All of our panelists felt that it played well, sounded good, and in general felt like a more expensive guitar.
For most players, the ideal location to place modulation effects—which include phase shifters, flangers, chorus, rotary, tremolo, vibrato and so on—is directly after a compressor and/or overdrive/distortion pedal. When these effects are distorted after the fact, the sound tends to smear and lose definition (particularly with chorus), although there are a few exceptions where distorting a flanger or phase shifter can sound really cool. The best example is Eddie Van Halen, who doesn’t use distortion pedals and instead generates all of his distortion from the amp. When a flanger or phase shifter is placed in front of a distorted amp or overdrive pedal, it can create dramatic thick, jet-like phasing and flanging effects (See Example 2, below).

Gretsch was founded in 1883 and started out making banjos - it wasn't until the 1930s that they began producing guitars - but during the 1950s their guitars began to take on legendary status. During the 1960s their popularity hit stratospheric levels because George Harrison was playing a modified 1957 Gretsch Duo Jet that he bought second hand for £70 from a ship crew member in Liverpool who had bought it brand new in New York. Most collectors agree that the 50s & 60s are the most sought after Gretsch guitars.
Several years later, Gibson issued its third Jimmy Page Signature guitar, this one based closely on Jimmy Page’s #2. Issued in a production run of 325 guitars, the guitar more accurately reproduced Page’s heavily modified No. 2 than the original Signature model of the 1990s, and featured the 4 push-pull pots, the two mini-switches under the pick guard, accurate tuners and sound-accurate pickups (the same pickups that were used in the 2005 Jimmy Page No. 1 Signature), as well as an accurate neck profile. As in the original Signature model of the 1990s, pulling up the neck or bridge volume pots switched the respective pickups’ coils from series to parallel, and pulling up the tone pots switched the respective pickups from humbucking to single coil. The two push-button DPDT switches mounted beneath the pickguard provide universal switching functions, regardless of the positions of the push-pull pots. With the switch mounted toward the bridge-end of the pickguard in the out position, the bridge pickup’s phase is reversed. With the switch mounted toward the neck-end of the pickguard in the out position, both pickups are wired in series and out of phase. With both switches out, both pickups are in series and in phase. The Jimmy Page “Number Two” Les Paul is finished with a sunburst finish to replicate the appearance of the original guitar. 325 of these guitars were made, with the initial 25 being autographed by Jimmy Page and priced at US$25,000 when new.
He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
Dexter Holland (b. 1965) is the rhythm guitarist of punk rock band The Offspring and has played Ibanez guitars for most of the band's existence. He currently uses a custom diamond plate RG with a custom Jägermeister logo on the twelfth fret, as well as DiMarzio Super Distortion pickups, though he used to use a brown and green custom RG and has been seen with a custom Purple RG.
Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.
Time controls the length of time between any two repetitions of your signal. It is most often measured in milliseconds (ms). Most delay pedals don’t have a delay-time readout that would enable you to determine exact delay times in milliseconds, so you typically just adjust the Time knob to get an approximate time based on the unit’s available range. For instance, the Boss DD-7 (street $179) has a Mode knob that selects between four time ranges—up to 50 ms, 51–200 ms, 201–800 ms, and 801–3200 ms—and the Time knob then adjusts the setting within the selected range.
Gibson also tops the list of best electric guitar brands that retain a consistent design. Among the popular models, the Les Paul is a favorite guitar that has been ruling the music world for several decades. It is a high-end, USA-made instrument that comes in a variety of variations. Other famous Gibson guitars include the SG, Explorer, Flying V, ES-335, and Firebird.
By ’71, the Univox had expanded considerably with new copy guitars. Still around from earlier were the Hi Flyer Mosrite copy, the ‘Lectra violin bass, and the Mother or Rhythm and Blues Les Paul copy. Joining them were the Badazz guitar and bass, the Effie thinline, another Coily thinline guitar and bass, and the Naked and Precisely basses. Univox acoustics are also first sighted (as far as we know) in ’71.
Description: Body: Mahogany - Body Construction: Solid - Neck Wood: Maple - Neck Construction: 3 Piece - Nut Width: 43.2mm - Fingerboard: Rosewood - Frets: Bound, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Gibraltar/Accucast - Hardware: Black - Pickups: EMG 81/85 - Pickup Configuration: H-H - String Instrument Finish: Black
According to Mr. Noguchi, Teisco instruments debuted in 1946 and were made by a company founded principally by the late Mr. Atswo Kaneko, a renowned Hawaiian and Spanish guitarist, and Mr. Doryu Matsuda, an electrical engineer. Mr. Doryu Matsuda was born in 1921 and was still alive at the time of this writing. As mentioned, Mr. Kaneko gave the guitars the Teisco brand name, however, the original name of the company was Aoi Onpa Kenkyujo (roughly translated: Hollyhock Soundwave or Electricity Laboratories). This was a small workshop formed in war-ravaged Tokyo.
This guitar is a great platform for making a few mods to turn this into something that punches away above its weight. For more on this, check out this blog post from guitar experts Mike and Mike’s Guitar Bar, who also go to the trouble of running down the various aspects. Alternatively, you could save about $50 by opting for the Vintage Modified Jazzmaster, instead.
Echo is a naturally occurring effect. Since the first days of recording, men have attempted to create an artificial method of duplicating this effect. The first attempt were echo chambers (or rooms) that created a “natural” echo. These rooms still exist at some recording studios. Tape echo effects came next, offering portability and variable rates of echo. These units were often noisy, but are still favored for their warm echo tone. Analog delays solved the problems inherent with tape (bad tubes, noisy tape, and misaligned or worn out tape heads) but had limitations in the length of their delay. Finally, digital delays appeared in the 1980s and offered more delay time and added features, but also came with a more sterile sounding tone. Many digital delays now simulate tape, analog, and digital delays
As an example of pre-distortion EQ, Eddie Van Halen places a 6-band MXR EQ pedal before the Marshall amplifier head (pre-distortion EQ). Slash places a Boss GE-7, a 7-band EQ pedal, before his Marshall amp. This technique is similar to placing a Wah pedal before the amp's preamp distortion and leaving the Wah pedal positioned part-way down, sometimes mentioned as "fixed wah," (pre-distortion EQ), along with adjusting the amp's tone controls (post-distortion EQ).
An avid skateboarder and hot-rod enthusiast, Ness epitomizes working-class Southern Californian culture. Springsteen comparisons are always dangerous, but the Boss did appear on Ness’ 1999 solo disc Cheating at Solitaire. Springsteen also named Social Distortion’s Heaven and Hell as his favorite record of 1992. Brian Setzer is another kindred spirit and musical collaborator. Ness is one skate punk kid who has stood the test of time.

Maton established itself early on the Australian rock scene in the late Fifties, assisted by Australia’s tariff regime, which made imported guitars far more expensive than the local equivalents. Maton guitars were used by many well-known Australian pop and rock groups including Col Joye & The Joy Boys. The company also made one of the first sponsorship deals in Australian rock, supplying Melbourne band The Strangers with a full set of the distinctive ‘El Toro’ model guitars and basses (notable for their outlandish ‘horned’ body shape) while the group was working as the house band on the TV pop show The Go!! Show in the mid-Sixties.
This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.
Gotta say a tele has to be the hardest but most rewarding to play. If you make a mistake, you will definitely hear it, but it just helps you're playing get more clean. Les pauls are a lot easier with the shorter scale length and forgiving pickups. Haven't played any metal guitars but I figure it has a lot to do with their setup that makes it sound so easy. You can do just about anything with the tremolo arm into a van halen kind of setup and it'll sound cool. Or you can whack one off with your guitar like steve vai

Despite its high production figures, Fernandes is better known in the United States for its Sustainer system, which uses electromagnetism[1] to vibrate a string for an extended period, so long as the user continues to fret a note.[2] Unlike the similar manual E-Bow sustainer, the Fernandes Sustainer can be used with a standard plectrum, because the sustainer is imbedded in the body of guitar. Fernandes' custom shop has installed numerous Sustainers into guitars built by other manufacturers.
The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
A lot of folks really like Squier guitars. In most cases, I'm not one of them. Fender’s economy guitars (Squiers) are cheap, coming in under $400 (often $200 or less), which can be an attractive option for a first-time buyer. However the price difference between a Squier Strat and a real deal Fender Strat isn’t big enough to make up for the quality hit you take when you buy a Squier.

All tube class A single end design Factory modded with premium components selected for optimum tone. This is Vox taking on the boutique guys and beating them at their own game. Lush rich 3D tone and with a classic Vox chime. Paired with an Alnico 2x12 and a reverb pedal you’ve got beautiful shimmering natural tone to die for. Boxed in excellent condition.

Finally introduced in 1936 was National Dobro’s first wooden Hawaiian Electric Guitar. These Hawaiian laps were built by National Dobro in Chicago. This had a squarish pear shape, rather wide and frumpy, with two sharp points for shoulders and fairly wide cutaways. This was “…solid wood finish, in hi-lited mahogany,” which is basically a shaded mahogany sunburst. The top was bound. A square neck rose up to a squared-off flat three-and-three head, now with plate tuners with plastic buttons. The 26-fret fingerboard (23″ scale) had dot inlays plus little numbers written along the treble edge for each fret position! This first wood-body looks to have some sort of elevated pickguard, also made of wood. The old, improved Stimson pickup was housed under a large, two-part rectangular cast bridge assembly with a slotted cover revealing the pickup poles, and a slightly elevated back section with rear slots for attaching the strings. Two little wings were appended to either side of this rectangular housing, the treble side with a volume knob, the bass side with a screw-on microphone-type plug attachment (this would be favored over 1/4″ plugs on Supro laps for years to come). A square metal Supro logo plate was mounted between the end of the fingerboard and the pickup cover. Again, cost was $75, including the amp.
Because of the miniaturization of all things electronic, you can now get full-sounding, authentic guitar sounds from a unit the size of a disposable camera — as long as you listen to it through headphones (meaning that it has no speaker or power amp of its own). These battery-powered wonders come with belt clips for untethered practicing (great for checking your stage moves in the mirror).

THE CONTROL CAVITY Routing the control cavity is just as important as the neck pocket but with a couple more steps. The best thing to do is to cut out the plastic cover. Trace the pattern that you came up with for it on the plastic then cut it out with a jig saw. Use a fine tooth blade to prevent the plastic from chipping and will also yeild a smoother cut. Once this is done, take your template and reverse it, trace the patern on the back side of the body. Next set your router to a depth that is the same as the thickness of the plastic plate and rout the cavity working out to the line you drew. I do this free hand since the first cut is too shallow for a template. Be careful when you do this and test fit the plate you cut to make sure you get a goo fit. Then you will draw another line about 1/4" along the inside of the cavity you routed out, leaving extra room in areas for the screws you will use later on to secure the control plate. Rout this area out in the same way, working out to the line you drew. When you start to get close to the half way point in the wood start to think about how much wood you need to leave at the bottom. Usualy 1/4" is good but make sure you are careful! I miscalculated once and ended up going all the way through the body. Bad experience. 

Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
Boss's MS-3 is an ingenious pedalboard solution that gives you programmable loops for three of your own pedals and a host of built-in effects - 112 to be precise. The MS-3 can switch your amp channels, adjust external effects and integrate with MIDI-equipped pedals. Then there’s the built-in tuner, noise suppressor and global EQ. It’s as if Boss looked at everything players could want from a pedalboard controller and crammed it into one compact unit. There are 200 patch memories for saving your expertly tweaked sounds, each with four effects or pedals that can be switched in or out at will, or four presets that can be instantly recalled. The MS-3 is rammed with pristine modulations, all the essential delay and reverb types, as well as a load of Boss specials, such as the dynamic Tera Echo and sequenced tremolo Slicer. Then there’s the niche yet useful effects, such as an acoustic guitar sim, Slow Gear auto fade-in and that sitar sim you never knew you wanted. The drive tones don’t live up to standalone pedals, but for most players, we’d wager those three switchable loop slots will be used for analogue drives, with the ES-3 handling modulation, delay and reverb. A genuinely exciting pedalboard development.
The most famous Gibson guitar is the Les Paul, which has been a mainstay in the music world for decades. The Gibson Les Paul is a high-end, made-in-the USA instrument, and it comes in a few different variations. Like Fender, Gibson has remained fairly consistent with their styles and designs. In addition to the Les Paul, other famous Gibson electric guitars include the SG, Flying V, Explorer, ES-335, and Firebird. Their classic acoustics include the Hummingbird.
Vacuum tubes were the dominant active electronic components in bass amplifiers manufactured from the 1950s until the early 1970s, and tubes continue to be used in the 2010s for expensive bass combo amplifiers, amp heads, and preamplifiers (as well, tube amps continue to be used by audiophiles for some expensive home hifi stereo systems). Tube amplifiers for bass almost always use class AB1 topology for efficiency reasons.

The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.

I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say. He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston. It's rare to see any establishment get 5 stars from so many people and Steve deserves it! Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC. Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!
{"pageName":"[mf] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}
Our production/assemble time frame: 15 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.

If the LR Baggs Venue is a little too expensive for your taste, the Acoustimax Sonic Maximizer preamp from BBE gives you a lot of the same controls at less than half the price. Like the Venue, the Acoustimax is ideally designed for the gigging or studio acoustic guitar player who wants to have more control over their tone and be able to adjust for different rooms and environments. BBE delivers this control with a five-band EQ, as well as feedback and frequency dials.

Many readers will already know that germanium has been the effects buzzword of the past many years. These transistors are considered softer, rounder, more musical. Don’t be fooled: that doesn’t mean they make music all by themselves, you have to make music through them. But that’s not such a bad thing. Open up a Fuzz Face for the first time and you’re likely to be startled by its simplicity, and other early fuzzes like Maestro’s Fuzz-Tone (1963) and Sola Sound’s Tone Bender (1965) are equally basic. As far as the Face goes, you’ll find fewer than ten components on the board, two of them being those crucial AC128 or NKT275 transistors. Interestingly, the Tone Bender originally used two OC75 germanium transistors made by Mullard, the revered British tube manufacturer.
Chet was THE best guitarist to ever reach popular standings. That doesn’t include the classical guitarists and jazz guitarists who could play him under the table though. Which gets me thinking, this list would be a lot different if it included people that were in the background, but were easily better than anyone popular. For me chet would still make top 100 even on that list though. That’s gotta mean something…
Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
{"pageName":"[gc] vintage: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Spanish-style electrics, which you could sling in front of you while standing and singing, proved to be much more versatile for many different musical genres. Gibson’s 1936 ES-150 (E for Electric and S for Spanish) had a sleek bar-shaped electronic pickup that was mounted into the guitar’s hollow body for a more streamlined look. The pickup earned the nickname “the Charlie Christian” thanks to the jazz virtuoso who is generally credited with introducing the electric guitar solo. In 1939, Christian stepped out in front of Benny Goodman’s band and performed long, complicated passages imitating the style of horn playing. He explained, “Guitar players have long needed a champion, someone to explain to the world that a guitarist is something more than a robot pluckin’ on a gadget to keep the rhythm going.”
Noise gate: Noise gates attenuate hum, hiss, and static in the signal by greatly diminishing the volume when the signal falls below a set threshold. Noise gates are often used by electric guitarist who play with vintage amps, which can have unwanted hum in the tone, and by guitarists from heavy metal who use high distortion levels, which add noise to the signal even when no notes are being played. Noise gates mute the signal when it falls below a certain threshold. This means that during bars of rest for the guitarist in a song, the hum or noise from the amp or distortion pedal will not be heard by the audience. Noise gates are expanders—meaning that, unlike compressors, they increase the dynamic range of an audio signal to make quiet sounds even quieter.[60] If used with extreme settings and combined with reverb, they can create unusual sounds, such as the gated drum effect used in 1980s pop songs, a style popularized by the Phil Collins song In the Air Tonight.[62][63]

{"pageName":"[gc] pdp: palmer palmer electric solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113503875;;;;evar65=null-Guitars-Palmer","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
For most applications, all you really need is a guitar input, and an output that you can plug to an amplifier or PA system. Still, it doesn't hurt to have extra input/output options, like a mic XLR input (for vocalists who play guitar), an aux input (for practicing with your favorite tracks), headphones out (for quiet practice and tweaking), stereo output, and many more.
Should space restrictions or volume levels make these methods impractical, try adding an air-guitar part as an overdub to a conventionally miked guitar track. The principle is similar to vocal doubling, for which the same part is performed twice; you may not be able to do this for an improvised solo, but for rhythm parts or composed lines, it's a snap. In addition, double tracking with a bright acoustic guitar or a smooth-sounding hollow body will add extra richness and some slick, big-budget zing to your mixes.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:
I have been playing guitar, banjo, bass and harmonica for 46 years - and I don't find a $4,300 Martin D 41 to be affordable (Guitar Center price). I play a Taylor 402ce and a dozen other instruments. I believe Taylor is the best instrument for the price..Alvarez Yairi guitars are very good too. Martin and Gibson make fine guitars but they are overpriced. I have a Chinese Maple Guild that sounds fine but the fretwork is amateurish. A Chinese Takamine New Yorker is very well constructed and sounds great.

Our fretwork is one of the things we are most proud of. We go to the extreme to make sure that your guitar is going to play the best it can. The fingerboard is planed under tension. The fretting process is done with epoxy fretting. We use a special blend of epoxy that makes re-fretting very easy without messing up your fingerboard. This process is used for multiple reasons. One of the advantages to this type of fretting is that you lose the hollow gaps under the fret that you find with the traditional way of fretting. In traditional fretting, with each fret you put on, it is like driving a wedge into the fingerboard, which causes back tension on the neck. With epoxy fretting, all of these issues are eliminated. The epoxy under the frets helps to transfer string vibration throughout the neck to the body, and relieves all stress and tension on the neck that occurs with traditional fretting. This results in a stress-free neck, which allows the truss rod to work properly and to adjust the neck accurately.

  	GNUitar is a basic free guitar effects software that allows you to turn your PC into a guitar effects processor without having to spend a single dime. Nothing much needs to be said aside from it is working as intended. Although you don't have too many options, it has all the essential effect types including distortion, reverb, echo, delay, chorus, flanger, equalizer, wah, phaser, tremolo, vibrato and noise reduction. The package comes with 2 different types of distortion and has various flavors of echo, reverb and delay. This free software works for both Windows and Linux.

Fun !...Top 5...Such a good game I love it I would defiantly reccomend this game to all console users the graphic las the entertainment is just great you can play either online or offline so that's good so many different missions to play all at different difficulty so they ain't too easy but they also ain't too hard I ate this 5 stars for everything of people like shooting games car games then go get this game coz it is all of those things it is just excellent....The graphics are amazing though but I'm going to trade it in for something I enjoy more if this is your type of game I would recommend it but I mostly play games like Diablo and wolfenstein thought I might like it but don't and I don't have anything negative to say about it because it looks and plays great just not my cup of tea
ESP is yet another brand that acquires a notable stance in the history of guitars. Back in the 1980s and 1990s, the company was known for producing high-quality, custom-shop instruments with incredible original designs. Even now, the trend goes on. Today, ESP guitars are among the preferred guitars for most professional musicians around the world. Particularly, the metal and hard rock players mark this brand as their favorite.
Other early phase shifters used field effect transistors (FETs) to control each phasing stage in place of the light bulbs in the ’Vibe, and certainly later units employed opamps with variable resistors (six TL072 dual opamps or similar in the MXR Phase 100, for example). Electro-Harmonix’s sweet little Small Stone, on the other hand, has a more unusual design that employs five CA3094 type Operational Transconductance Amplifiers (OTAs). The results are similar, but subtly different. Many phasers—such as MXR’s Phase 45 and Phase 90, and E-H’s Small Stone—carry nothing but a speed control, plus a “Color” switch in the case of the latter. Others have Depth, Mix and Resonance controls. The latter appears on many units with internal feedback loops (the Small Stone and most phasers before it lack this circuitry), and allows the player tweak the degree to which the portion of the signal fed back enhances the frequency peaks.
Williamson went on to produce and play on Iggy’s classic solo 1979 album New Values, which features gems like “I’m Bored” and “Five Foot One.” The guitarist also played a key role on the follow-up disc, Soldier, anchoring a punk rock all-star lineup that included ex-Pistol Glen Matlock, Ivan Kral from the Patti Smith Band and Barry Adamson from Magazine. Shortly after Soldier, Williamson took a hiatus from rock to study electronic engineering, becoming Vice President of Technology and Standards for Sony.
On the whole, Decca sold a lot of these guitars but the timing was awful.  By 1968 the demand for electric guitars had decreased dramatically.  MCA was about to bankrupt Danelectro, and CBS was cutting all sorts of corners on Fender instruments.  Darker times were coming folks, but for a moment, let’s rejoice in the mid 60s era of records and guitars!
Some amps have a bright cap on the volume pot. The purpose of this cap is to allow your amp to provide a bright, clear tone at lower settings on the volume pot. The more the pot is increased, the less effect the cap has. When the pot is turned all the way up, it should be completely out of the circuit. Like they do with a bright switch, drive pedals can interact with a bright cap and result in less-than-pleasant drive tones. If your amp has a bright cap and you don’t like the way it responds to some pedals, or you find it excessively edgy at low volumes, consider having a competent amp tech change the bright-cap value or remove it altogether. This can be a worthwhile and easily reversible mod.
{ "name": "Lime Green", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Lime-Green-1500000152097.gc", "status": "backorderable", "statusText": "Back Order", "skuItemType": "New", "inventoryText": "Backordered", "inventoryKey": "out_of_stock", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152097", "shipToStore": false, "displaySku": "K47863000004000", "displayId": "1500000152097   POS #: 113861066", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-25-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Lime Green", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"368856727023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.
Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
if you wish to use your computer as an "effects pedal", I recommend IK Multimedia's Amplitube 3 - it has an extensive array of effects and amplifiers with all kinds of crazy and fun tones to mess around with. Theres a ton of effects, so I recommend you check it out. It is a bit pricey though ($199 for the standard edition). If I were you, I would download the Amplitube CustomShop, which is basically a free demo version of the full software.
Turning our attention to the main controls on the front, it actually doesn’t look as intimidating to use as some owners of it make it out to be. Yes, you can get lost in tweaking and tinkering with amp models and effects until you’re blue in the face - but we actually find the interface to be nice and uncluttered, with all the footswitches and knobs nicely spaced out. On the top left there’s a small screen with some knobs surrounding it, and this is where the majority of your tweaking and editing will take place. Across the top are seven knobs which are meant to replicate what you would find on your amp. If you’re interested in the amp modeling part of the POD HD500X, you’ll appreciate having things like DRIVE, BASS, and PRESENCE immediately available. Two footswitches on the far left of the unit are responsible for up/down menu navigation, eight switches labeled FS1 to FS8 are assignable to individual effects, and finally there are two switches dedicated to the Looper function, and Tap Tempo/Tuner. You can also clearly see an expression pedal built-in on the right of the unit.
And for those who don't feel ready to tackle songs yet - or just need a refresher on guitar play - "Rocksmith 2014" has 1980s-looking Guitarcade games to help you work on various skills. "Gone Wailin'!" is a "Jetpack Joyride"-esque game where you fly through the air to catch bananas; how high and low you fly depends on how loud you play. In another, "String Skip Saloon," you shoot bandits by plucking the right string. With no time to look down, you have to learn which string is which.
“Spectrum ‘5’ has an unusually thin neck. To achieve the proper rigidity in this fast action neck Teisco had to select the hardest (and the costliest) material available…Ebony. The adjustable neck is fashioned out of 5 plys [sic] of laminated Ebony to insure maximum strength. The fingerboard of the Spectrum ‘5’ is likewise fashioned out of Ebony. Note the unique position markers and the extra wide, easy to finger frets.
Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.