Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[69]

I had just finished signing up for guitar.com. I am a 54-year-old disabled Miner of 22 years, so I thought I would try to take up playing the guitar once again like I did when I was a kid. I forgot a lot about it through the years as life moved on, but now all I have is time. I came across your website and thought why not give it a try. so anything you suggest I will try once twice if I like it lol


I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.

By the way, I’d like to also take this opportunity to thank collector and one of VG’s earliest subscribers Jim Dulfer for invaluable help in an ongoing research effort, providing access to his truly impressive paper collection and photographs of some of his instruments. These catalogs are filling in many, many holes in information. You will be reaping the benefits in upcoming “Different Strummer” columns in both information and illustrations, as well as in upcoming book project. Thanks to Jim from guitar fans everywhere!

The 1964 TRG-1 was a slightly more asymmetrical variant of the WG body style, with offset double cutaways and offset waists. It had the squared-off Bizarro Strat head introduced in ’63 and rectangular-edge fingerboard inlays. The tail was a primitive top-mounted trapeze. Most of the face of the guitar was covered with a large metal pickguard, which had one two-tone neck pickup. The volume and tone knobs were above the strings, as was a small sliding on/off switch for the amp. In the off position, the guitar played out as a normal electric guitar. Horizontal grill slots were cut into the pickguard, behind which sat a 3-inch speaker. The amp operated on two 9-volt batteries installed in back. The TRG-1 shown in the subsequent ’64-65 catalog had a new, hooked headstock, but all the examples I’ve seen have the squared-off Bizarro Strat head. Also, the model I have has a TRE100 designation on the back sticker, so at least some were called this.
Before we wade in, please note that National Dobro and subsequently Valco, more than most other manufacturers, were notorious for putting together guitars with parts left around. This, combined with the fact that they routinely used components (especially bodies) provided by other manufacturers, means that you are likely to find instruments with details inconsistent with catalog descriptions, and they may just be Kosher.
Also called tuners or machine heads, these geared mechanisms, usually mounted on the guitar's headstock, hold the strings in place and allow tuning the instrument by adjusting string tension. Most modern tuners have enclosed, permanently lubricated mechanisms. Strings are held in place on posts that are attached to knobs, which are turned to adjust string tension allowing the guitar to be tuned. Some tuners are designed to lock in place. This provides more tuning stability, and helps prevent strings from slipping loose from the tuner. It also makes changing your strings a little easier.
Lots of people tend to research for months about which is the best electric guitar when what they really need is to get started playing and practicing. Becoming an elite player requires time behind a solid axe picking and strumming. What a beginner needs is an electric that is generally great so they can learn over time what specific nuances they care about, and that's what we discuss and share today...

Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.


When gluing a set neck guitar it’s important that you don’t use an excessive amount of glue. The glue should be applied to the base of the neck and base of the neck cavity. Try to limit the amount of glue so that it doesn’t come into contact with the edges of the neck or pickup cavity as this can impact on the tonal quality of the guitar and sustain.
It is an obvious fact that all those great guitarists must have had a humble beginning, having started with the best beginner guitar that suits them. Some of these artists started with guitars inherited from their parent, friends and/or relatives while others ordered theirs from guitar shops. If you are a newbie yet a guitar enthusiast and you are seeking to buy one among the best guitars for beginners, then there are tips and facts you will have to put into consideration.

Lastly, if what you're really asking is "Can I play my electric guitar without making any noise that would bother my neighbors/housemates?" Many amps and all direct in setups will allow you play with headphones. I plug headphones in a small tube amp. The sound is quite nice. I find this setup allows me to experiment even more than usual since I am not self conscious about anyone hearing what I am playing. I've seen little tube amps for as little as about $125 that have headphone jacks. At that price don't expect Fender, Dr Z, Vox, Marshall or Mesa Boogie quality sound, but they get the job done of basic tube drive and bypass the loudspeaker by driving the headphones.
Fender released the first successful solidbody electric guitar, the Broadcaster, in 1950. (Remember, the original Esquires were problematic.) Gibson produced the first Les Paul 24 months later. And a mere six years after that, a small run of sunburst Les Pauls flowed out of Gibson’s Kalamazoo, Michigan factory. Originally just another instrument, those Les Pauls now occupy a mythic status in the minds of guitarists and collectors everywhere. The instruments, along with a small handful of Fender Stratocasters and examples from one or two other manufacturers from roughly the same era, represent the Holy Grail in guitar tones.

Whilst we’re on the subject of practice amps, we have to talk about the amazing BOSS Katana-Mini Guitar Amplifier. This little powerhouse of tone makes our best cheap amps that don’t suck list due to its immense sound, portability and inspiring tones within. Coming straight out of the acclaimed BOSS Katana series, the Katana-Mini uses the authentic multi-stage analog gain circuitry which allows you to select from three classic sound settings - Brown, Crunch, and Clean and enjoy a selection of fantastic sonic options. On top of that you have a classic 3 band EQ to dial in your perfect sound as well as an onboard tape-style delay.
The use of overdrive distortion as a musical effect probably originated with electric guitar amplifiers, where the less pleasant upper harmonics created by overdriving the amp are filtered out by the limited frequency response of the speaker. If you use a distortion plug-in without following it up with low-pass filtering (or a speaker simulator) in this way, you may hear a lot of raspy high-end that isn't musically useful. This is why electric guitar DI'd via a fuzz box or distortion pedal sounds thin and buzzy unless further processed to remove these high frequencies.
If the book had been proofread better, I'd give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn't tell you which track number to play. It's easy enough to figure out what was meant, but a little more care would have been better.

This Duo-Jet has the typical brown back and neck finish, original tuners, bone nut (which has never been off), ebony fingerboard and original frets, lefty thumbprint inlays, original Pat. Applied For Filter’Tron pickups with original wire harness including switches and capacitors. All solder joints are original. Original bar bridge. The lefty Bigsby tailpiece does not appear to be original to the instrument, and is probably a late 60s Bigsby, as there are screw-holes from another tail-piece on the bottom. The second to most recent owner acquired the guitar with its current tailpiece in 1971, and the only change he made to the Bigsby was in removing the black paint. The guitar was recently sent to Curt Wilson at Old School Guitar Repair(www.oldschoolguitar.net) at the recommendation of Gretsch guru, Edward Ball, where the front of the headstock was refinished to the correct black(previously Orange) and the center portion of the Bigsby was repainted black. Sadly, the previous owner removed and discarded the original lefty pickguard many years ago.
One of more commonly known effects for musicians is distortion. It falls into the family of effects sometimes referred to as "dirt" boxes: Distortion, Overdrive, and Fuzz. In simple terms, it is cutting the top and bottom of the sound wave off using a technique known as "hard" clipping to create a more square shaped wave instead of the more natural sine wave formation. A solid explanation on the techniques and methods of creating different types of distortion can be found on Wikipedia.
One oil finish that many luthiers use and recommend is Tru-Oil, which was originally formulated for finishing gun stocks. It is the oil finish that Luthier's Mercantile carries, and if you Google for Tru-Oil you will find plentry of information about using it on guitars including some very good instructions. And those instructions will help you with Danish Oil as well.
Barely used in my home, NUX Cerberus multi pedal. Not a modeler, it has true bypass distortion, overdrive, modulations(chorus,flange, phase, univibe and trem) as well as delay and reverb- all completely programmable and can be used as a pedal board or as presets. Built in tuner and cab simulator- great multi pedal can be used as a fly rig or in front of an amp- Comes in the original packaging with power supply. US buyers ONLY- I will not ship internationally- No returns accepted
Oh, did you say you like lots of switches and pickups and knobbies?  Hell, welcome to our club!  Yes, the Norma 421-4 was the proverbial “king” of the catalog from 1968 to around 1970.  Similar guitars were sold in Japan at this same time, mostly carrying the brand name Liberty.This model was sold alongside a 12 string (EG412-2T) with a tremolo(!!!!!), a bass (EG467-2B), and a two pickup version (EG450-2).  Reading the catalog from 1968 is a real trip!  Here’s the description of the 412-4:
DR Strings makes strings that were specifically designed for drop d tuning, other alternate tunings, and even standard tuning. Known as DDT strings, DR spent over two years perfecting them. DR created a new patent pending method for constructing these strings to ensure great performance with lower pitches. Because of the amazing construction, and their ability to quickly lock into tune so quickly, DR calls their DDT's "Superstrings". Why not try a set? DDT's are available for electric guitar or bass guitar.
With his exceptional talent, it seems that everyone wants to collaborate with Santana. What’s more, when he does join hands with another artist, it seems that his raw and authentic sound always shines through, taking the limelight. That is not to say that his tracks aren’t all different and uniquely great in their own way! There are so many manipulations that he has found and continues to find with the Latin rhythm. People say that the Grammy-winning guitarist can be identified with just one single note – now that’s an achievement!

Near the beginning of Epiphone's thinline semi-acoustic range is 'The Dot', based on the timeless and legendary Gibson ES-335. The Dot feels comfortable to hold and play, and the neck, while by no means clubby, feels substantial in your palm, probably due to the 43mm width at the nut. Its slightly flattened C-profile increases marginally in depth further up the neck, making for a suitably vintage feel. An acoustic strum issues forth a pleasing, resonant ring. We'd wager that the Dot's all-maple construction has got something to do with that, but more obviously, the hollow bouts bolster the acoustic tone, inducing wry smiles to those listening. Before plugging in, listen to Ronny Jordan, then Noel Gallagher, then BB King, then George Harrison and John Lennon. It becomes immediately apparent that this style of guitar is hugely versatile. This Dot is no exception: the pickups, while not packing the punch of USA PAFs, offer everything form smooth and moody, front-position mellowness to screeching, bridge position rawk. It's one of the best electric guitars for jazz at this price point, too. The Dot looks fine, sounds great and plays great. To our minds, that's value for money indeed.

Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.


By 1970, regular distribution of Japanese-made guitars, including Lyle brand guitars, began in America. In the early 1970s, Arai joined with instrument manufacturing company Matsumoku to produce guitars. It is inconclusive if they continued producing Lyle guitars at this time, but they did launch the Aria Pro II line in 1975, which included set-neck copies of the Gibson Les Paul and SG, and Fender Stratocaster and Telecaster guitars.
As with most chords in this list, a clear G major chord depends on curling your first finger so the open fourth string rings clearly. Strum all six strings. Sometimes, it makes sense to play a G major chord using your third finger on the sixth string, your second finger on the fifth string, and your fourth (pinky) finger on the first string. This fingering makes the move to a C major chord much easier.
One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.
I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.
In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
The foot pedal is usually the only control on a wah pedal (especially on famous models like the Vox V487 and Dunlop Crybaby), but some come with controls to change the Q, or how wide the sweep of the wah is and how prominent it sounds. They are great for adding extra attitude to your bends and giving funky riffs some extra punch. The intro to “Voodoo Child” is probably the most recognisable use of a wah pedal. These are great fun and we’d recommend them to anyone – if lead guitar or funky rhythm is your thing you can’t do without it!
This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
Before it gets shipped to you, each Monoprice guitar undergoes a setup, tuning, and inspection process by Master Luthier Roger Gresco here in Southern California. The setup ensures that the neck is straight, the action is right, and that it will stay in tune. Additionally, it comes with everything you need to get started, including strings (installed), a heavy-duty zippered black gig bag with shoulder strap, and a truss-rod wrench.
Now, you may be wondering if there are things to love about Guitarist and there certainly are. The GUI is incredible and simply one of my favorites around. And if you need funk or jazz rhythms fast, then this is your guy — the auto-wah feature saves this plugin. The more you put realism out of your head and strive for interesting tones, the more you’ll like Guitarist.

Second, the right side of the pedal is a feedback controller and a series of knobs that allow you to adjust the Sonic Maximizer feature. This hallmark of the Acoustimax basically streamlines your guitar's tone, matching up the lows and highs of your acoustic's resonance and projecting them at the same time. Without this feature, the tone of an amplified acoustic can be inconsistent, projecting higher frequencies earlier than the low end resonance.


Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
I’m Björgvin Benediktsson. I’m a musician, audio engineer and best-selling author. I help musicians and producers make a greater impact with their music by teaching them how to produce and engineer themselves. I’ve taught thousands of up and coming home studio producers such as yourself how to make an impact with their music through Audio Issues since 2011.
From the 1940s through 1990s, the company also manufactured various electric/electronic keyboards. Especially in the 1960s and 1990s, they manufactured a range of innovative and popular electromechanical keyboard instruments; the Cembalet, Pianet, Basset, Guitaret, and Clavinet. In the 1980s, several Casio synths were sold under the Hohner brand - for example, the Casio HT-3000/Hohner KS61midi and the VZ-1/HS-2).
Guitars come in two basic flavors: acoustic and electric. From a hardware standpoint, electric guitars have more components and doohickeys than do acoustic guitars. Guitar makers generally agree, however, that making an acoustic guitar is harder than making an electric guitar. That’s why, pound for pound, acoustic guitars cost just as much or more than their electric counterparts. Both types follow the same basic approach to such principles as neck construction and string tension, and so they have very similar constructions, despite a sometimes radical difference in tone production.

A far cry from just another mass produced vintage looking guitar, the Kay Vintage Reissue Series successfully duplicates the original 50's models, within feel, playability and the legendary Kay sound. Complete with the company's gold chevron, flagship headstock design, displaying 3-D raised "Kel-von-a-tor" style emblem, to this day, the Kay Thin Twin Electric Guitar is probably one of the coolest looking guitars ever made.


Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.

This is a nice improvement on the ME-70, which I owned previously, except for one thing: plastic expression pedal. That's why it got 4 stars from me. The ME-70 had a metal pedal, and it was substantially larger. This plastic pedal does not have the same feel. Feels chintzy. I was expecting similar quality but in that one regard the quality is inferior to the previous version.
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.
An equalizer (more often called EQ) is the device that allows you to adjust certain frequencies within your tone. The 3-band part implies that the EQ offers three points of control: bass, middle and treble. While 3-band is the standard, you can also have 2-Band EQ (which tend to offer just bass and treble), as well as 4-band EQ, 5-band EQ (low-bass, mid-bass, midrange, upper-midrange, treble) and upwards! Of course, the higher the band, the more versatility the amp offers. But 3-band tends to be the easiest to get to grips with.
It features a handsome Grand Auditorium shape with a soft cutaway for good access to the higher frets, while the satin-finished sapele neck is incredibly playable – as is the case with all Taylor guitars. The iconic brand keeps costs low with laminated sapele back and sides paired with solid Sitka spruce on the top, as well as producing it in the respected Mexican facility.
The Fender Stratocaster Squier is possibly the most recognizable shape in electric guitar history. The Fender Stratocaster design is mimicked by manufacturers all over the world. Fender produces its own line of budget “Strats” called the Squier series. If you want to start with an electric guitar, chances are you’ll buy something like this for around $130 USD.
The 700-series guitars had all controls and pickups mounted on a faux-tortise shell pickguard. That makes it very easy to do any required work on the electronics. By contrast, On the 800-series, with a couple of exceptions, the tone and volume control pots and the jack socket are mounted to the body, a three-way pickup switch, and a lead/rhythm slide switch are mounted to the pickguard; and the pickups are mounted to individual little mounting plates made of the faux-tortise shell material.
View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.
The common design of a standalone stompbox is simple and, thus, hasn’t changed much: The guitar lead plugs into an input while a second lead carries the output to the amplifier. In between, a multitude of knobs, switches, and pedals modify the signal. To connect two or more boxes requires “jumper” leads, which chain the boxes together to complete a circuit of circuits, each one powered by a 9V battery. Typically, stompboxes are activated by “stomping” on an on/off bypass switch. This simple design enables tinkering: The exterior casing can be easily removed, exposing the interior for modification. To do so requires only a basic grasp of electronics, solder tools (or a solder-less breadboard circuit), and patience. Lots of patience.
WOW! This thing is incredible. One of the nicest instruments we have ever played and we've had, played and sold a few hundred over the past 20 years! Can't say enough about this bass. It's a pre-owned Zon Legacy Elite series 5-string model featuring a beautiful book-matched solid Bubinga wood top over a solid Mahogany wood body. A solid graphite neck / fingerboard utilizing a sculpted body neck joint finishes off the basic construction of the instrument. Huge tone is delivered via 2 active Bartolini pickups that feature controls for volume, bass, midrange, treble and balance. This bass has had the electronics modified by Zon to move the midrange control from the access hole in the back cover to a matching pot located in the control section on the front of the bass. While at Zon to get the custom electronics installed,  the original owner had new frets and a new finish coat added. Figured as long as it was there "what the heck". Tuning is accomplished via the 5 German made Schaller tuning machines in the same gold plate finish as the solid cast bridge. The solid graphite neck features a full 2 octave neck with 24 frets and a 34" long scale. This bass is a dream to play! Just about as good as it gets. There's not a mark on it anywhere. It looks brand new! Rock solid and stays in tune. Set up perfectly! Includes original Zon Soft exterior hard shell case on black Cordura.

Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.
Solid body guitars offer a fantastic platform for builders, allowing them to craft the wood into literally any shape. Naturally you’ll probably want to opt for a guitar with a single-cutaway Les Paul or Telecaster style shape, or a double-cutaway shape like a Stratocaster, Yamaha Pacifica, or Ibanez’s RG. However, the more extroverted beginner can check out some cool styles that always catch the attention, such as V or Z shaped guitars, or anything from Dean Guitars – especially if you want an eye-catching paint job!
Dude I totally agree with you,Eddie Hazel was awsome.And Add Ernie Isley (he learned from Jimi Hendrix when he played with the Isley Brothers),And Carlos Santana(his oloder stuff,check out the Borboletta album from 1975),and if you like Hendrix and stevie Ray why isn't Robin Trower (Robin Trower Live) on this list ?Also the guitarist from the band Slave(he was17 when they cut the album with "Slide"on it).Most of these are Metal guitarists,I prefer a guitarist that can make the hair on the back of my neck stand up when they play.Someone that makes you feel different emotions when they play.Just because you can play super fast doesn't make you great.
Position 4 (inner coils, parallel connection): This is similar to position two just inverted. Pole 1 connects bridge pickup coil tap to the output through pole 2. Pole 3 grounds neck pickup coil tap and pole 4 connects neck pickup hot lead to the output. That leaves us with bridge pickup coil from ground to coil tap and neck pickup coil from coil tap to hot lead. Again, they are paralleled.
If you want to spring for a pedalboard and processor combo that offers multiple effects in one unit, you might want to check out something like the HeadRush Pedalboard with Guitar Amplifier and Effects Modeling Processor. It offers 33 amplifier models, 15 cabinet models, 10 microphone models, 42 effects, and includes an expression pedal, 7" touchscreen, 12 foot switches with OLED Screens, and more.

I think it's just a matter of how you prefer to restring your axe. Personally I use a peg winder and just thread all six through the body of the guitar (BC Rich Warbeast for practice, Ibanez for live play) at one time and then go through and wind them all up and tune accordingly. I think though that the main reason I do this is because restringing my Ibanez is not for the faint of heart, so it's way easier for me (I have one of those, I don't remember the model, that you have to lift the bridge up off the body and thread the strings underneath) doing it that way rather than going one at a time.
Adjust the volume and tone and engage the gain when you want to bust out some distortion riffs or throw your headphones in via the 6.3mm Jack headphone output which also doubles up as a preamp out. Enjoy silent practice anywhere or hook it up to your audio interface for studio recordings. A powerful little amplifier relied upon by guitarists when inspiration strikes. At under £30 it’s actually an essential purchase for musicians and one of the best music gifts ever – it’s certainly cheap, but it certainly doesn’t suck! Available in a range of different colours and as a double stack for extra volume.
I started to learn how to play guitar about 1.5- 2 years ago. My instruments are on the cheap/ lower cost side. I am disabled with a long life expectancy. I wanted a hobby that I can/ learn to do for the long run. I have five different guitars now ( all on the lower cost side ), They all sound good to my ear. One of them a Squire strat sounded horrible when I purchased it. I pretty much over a little time change just about everything but the wood. The Squire is a very light electric guitar as compared to my Epiphone Les Paul ( which actually strains my disabled spine ). So, It has to sound good to your own ear, and as equally important you have to be able to hold it for a period of time while playing to get the full enjoyment of the skill known as a "guitar player". Enjoy and be Proud. God Bless.
{ "thumbImageID": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "defaultDisplayName": "Yamaha FX335C Dreadnought Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000000265", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst-1500000000265.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000000264", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black-1500000000264.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000000262", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural-1500000000262.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000-00-60x60.jpg", "imgAlt": "" } ] }
And a heads up for anyone interested and if you're like me and somehow missed the fact that Line 6 is releasing a soft vst version of their Helix effects and amp sim package called Helix Native. I'm waiting on making a decision on updating my soft Amp/Fx packages until I see what it is like. If it's approaching anything like the hardware version(s) it should be great.
The one-man band has been elevated to new heights lately, but behind the loopers and pads, there usually lies an unremarkable musician. Australian songwriter Tash Sultana brings a widescreen pizazz to the format. Her sprawling, expertly weighted amalgamations of hip hop beats, soothing synth pads and foil-wrapped shimmering tones, give way to surprising bursts of scuzzy, shred-y solos, creating an exhilarating contrast to her breathy vocals. A talent that doesn’t decay with the delay pedal.
Ultimately, you want to make the best purchase for the person who will be playing the guitar while staying within your budget. As we recommended in the beginning, it’s good to get an idea of what the player is looking for. Find out what styles they like, and his or her favorite music. Looks are important too! The right guitar in the right color could make all the difference.
The Professionals - just like the Standards before them - are designed to appeal to a wide range of players with a wide range of styles - which makes this Strat one of the best electric guitars available. The major difference between these new styles, however, is the new single-coil pickups. The basic premise lies in using different rod magnets for the treble and bass sides of the pickups from a choice of Alnico 2, 3 and 5. All the Strat pickups use 42 gauge Formvar wire and are calibrated for their positions, plus the centre pickup is RWRP so the parallel mixes are hum-cancelling. The new neck shape here isn't hugely different from the ubiquitous modern 'C' of the previous Standards; it's marginally deeper back- to-front with a subtly fuller shoulder. Plugging in, this is a modern, clean-voiced Strat that almost sounds like it's been 'produced' to maximise its Strat-i-ness. Where are you going to take it? We find ourselves driving in a slightly different way, pulling back the tones a little to lose some of that edge for rougher tones, while the treble bleed cap keeps things bright as we knock back the volume and hit the pop/funk button.

Now check both the open and the 12th fret notes again. You’ll have to tune the open string again because by moving the saddle, the tension of the string will have changed and so will need to be retuned. Once you have correctly moved the saddle so that both the open string and the 12th fret are in tune, you can move on to the A string. Repeat until all of the strings have been done. Note that on this particular guitar, the (thick) E, A and D saddles could not be moved far enough forward to intonate correctly, so I had to swap their orientation to give a bit more distance.
Received it right on time. It was a gift for my best friend and it turned out to be a lot more beautiful than expected. The shade of blue looks real classy and different in different lighting ! Yamaha is known for its magical sound and they maintain their name with this piece too! The guitar comes tuned , and sounds absolutely amazing ! Other website reviews say that it's not as loud, I didn't think so. It has a complete resounding sound that is pleasing to the ears ! My friend went in shock at the surprise and I went in shock with the unexpected high quality ! Definitely recommend, as a beginner or a pro, it's an easy to handle guitar that cradles comfortably between your arms and sounds perfect.

Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.


A phaser pedal is similar to a chorus as it thickens up your sound but also adds a sweeping effect – almost as if the speaker within the amplifier is spinning around or moving up and down. If you pretend the speaker is moving away from you and moving closer and back again – you’ll get an idea as to how it sounds. You can change the length of the effect and how quickly the movements are via the pedal.

This style of volume effect rhythmically reduces and swells the volume of the signal in a regular cyclic fashion.  Often heard in Country and Western type guitar tracks, tremolo was commonly built into older amplifiers and is one of the earliest recorded effects.  The speed and depth of the effect is controlled on the pedal by way of one or two potentiometers.  When set to the tempo of a song, the player can produce an extra layer of rhythm on top of what is being played.
Guitars come in two basic flavors: acoustic and electric. From a hardware standpoint, electric guitars have more components and doohickeys than do acoustic guitars. Guitar makers generally agree, however, that making an acoustic guitar is harder than making an electric guitar. That’s why, pound for pound, acoustic guitars cost just as much or more than their electric counterparts. Both types follow the same basic approach to such principles as neck construction and string tension, and so they have very similar constructions, despite a sometimes radical difference in tone production.

For the guitarist who's frequently on the road or often plays out, the pedalboard is an indispensable aid. Many pedalboards include custom-fitted travel cases or gig bags. With your effects already mounted on the pedalboard, performance setups are fast: just unpack the already-configured board, plug in your guitar and amplifier, and you're ready to play.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]

{ "thumbImageID": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "defaultDisplayName": "Takamine G Series GD30CE-12 Dreadnought 12-String Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000034308", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black-1500000034308.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51372692952068", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural-1372692952068.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural/H99532000001000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural/H99532000001000-00-60x60.jpg", "imgAlt": "" } ] }
Distortion and overdrive: Distortion and overdrive units re-shape or "clip" an audio signal's wave form so that it has flattened peaks, creating "warm" sounds by adding harmonics or "gritty" sounds by adding inharmonic overtones. In tube amplifiers, distortion is created by compressing the instrument's out-going electrical signal in vacuum tubes or "valves".[52][53] Distortion pedals produce perfectly flattened peaks or "hard" clipping. Overdrive pedals produce "soft” tube-like distortion by compressing the sine wave without completely flattening it. Much like tube amps, overdrive units produce "clean" sounds at quieter volumes and distorted "warm" sounds at louder volumes. Distortion and overdrive pedals may either be transistor-based or digital.[54][55] While distortion pedals are most associated with electric guitar, they are also used with bass guitar (fuzz bass), Hammond organ and electric piano.
4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.
This is another invariable question that you should be asking yourself if you are going to buy an acoustic guitar. This is because you also have to consider your comfort level with the guitar body so that you do not have any problem playing it. Be it the one with a shallow body or a full body or be it an Ovation guitar, you will have to make the right kind of choice.
Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.

My question for this forum is this: I currently have a 2011 Fender Blacktop HH Stratocaster. It has the stock five position switch. All of the electronics are imports i.e.Korea, China etc.. I recently purchased a complete loaded pickguard from a Fender American Standard HH Strat. due to the poor overall performance of the Blacktop electronics-pickups included. Since the Amer. Stan. HH has only a 3 pos. switch, can I rewire it for a five pos. switch ( i.e. coil tapping the humbuckers as the Blacktop is configured)? If this is possible, where would I find a wiring diagram for these particular Fender Twin Head Vintage pickups showing them in use with a 5 pos. switch? Thank you for your time and cooperation.
I nearly returned this guitar when it first arrived. I'm very glad I changed my mind. When I first unboxed it I was not a fan of the sound at all, and I didn't think it could improve significantly, but I was wrong. I put my trusty Tone Rite on it and left it there for several days. It opened the sound up and made it project much better. The finish is great, and I love the dark sound of sapele. It just takes some time and playing to get it to open up. When I first picked it up, I much preferred the sound of my Seagull, but now the Martin is really speaking to me and the Seagull has been relegated to backup status. I've even picked up a couple of bluegrass tunes, just because I'm playing a Martin now. I've only plugged it in a couple of
Most guitar especially for those which have more than 1 pickup have selector switch. Attached on the body and normally below the 1st E string on the body of a stratocaster guitar. And on the top shoulder for Les Paul. Its a basic things to understand the switches on which pickups its toggling. First, you need to understand what is the switch for???
B.C. Rich specializes in guitars for the heavy metal and hard rock crowd. They’ve produced some of the most legendary designs in the history of metal, including the Warlock, Bich, Virgin, and Mockingbird. Their instruments helped to mold the hard rock and thrash revolution of the 1980s and B.C. Rich is still a great choice for any guitarist looking for an instrument that looks and sounds as edgy as possible.
This is an amazing acoustic guitar for the new generation of guitarists that is quite presentable, especially in stage performances. It comes with a black border and has a free gig cover. The fret board is made from rosewood, which makes it quite easy to handle. It has incredible rigidity, with truss rods on both sides. It produces a considerably high quality of sound and is cost effective with prices ranging from about INR 4,999. This may sometimes be accompanied by free packing and shipping. Find more information on the site link below:
While Dave Matthews Band has no more confirmed dates on their schedule, Matthews and guitarist Tim Reynolds have a number of duo performances on the docket, including a slot at Farm Aid 2018 in Hartford, CT on September 22nd alongside Willie Nelson, Neil Young, John Mellencamp, Chris Stapleton, Sturgill Simpson, Kacey Musgraves, Margo Price, Nathaniel Rateliff & The Night Sweats, Lukas Nelson & Promise of the Real, and Particle Kid. Dave and Tim also just announced their return to Mexico for a concert destination event set to take place February 15th–17th, 2019.
I suspect this has been done by someone but I can't find any such tests in my quick internet search. Seems to me this is the only way to really settle the debate; the differences may be too small to hear, but regardless if there is differences then the tone is being affected by the instrument. In that case the wood and body design is making the string vibrate differently, which is what the pickup...picks up.
I have a Samick Avion AV7 that I've been having trouble with a buzzing low E string when strumming with the first four frets. The bow is .013" and I set the 12th fret E string height to 2.5mm which helped, but not cured. I used a depth gauge to measure my frets, most measure at .043-.045" but the last two frets (21,22) measure at .052". At this point, would it be best to loosen the truss rod a 1/4 turn, or should I address the high frets, or could it be something else altogether? Thanks for the information.

This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please
{"pageName":"[gc] vintage: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
The separation between Briefel and Unicord must not have been entirely unamicable, probably more a matter of direction than anything else. In any case, in 1978, following the demise of the Univox brand (when the Westbury brand was debuted) three Westbury Baroque acoustics were offered, all made by Giannini. These included one “folk” dreadnought with a tapered Westbury head, the stylized “W” Westbury logo, block inlays and a very Martin-esque pickguard. The “classic” was our old friend, the CraViola, with a new head shape. The 12-string was another CraViola. These probably only lasted a year or so; in any case, the Westbury name was dead by 1981.
Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
Terry Kath and Stevie Ray Vaughan for me over anyone on that list but Jimi. I’ve seen Page, Clapton, Billy Gibbons, Brian May, David Gilmour, Steve Howe, Eddie Van Halen, Buddy Guy, Keith Richards, Pete Townshend, Mick Ronson, Kerry Livgren, Joe Walsh, Don Felder and Carlos Santana among others. Totally subjective as is all art and I have weird taste.
I heard off of a great guitarist years ago when I asked him about fender and gibson he said they were expensive and not great and also said the Gordon Smith guitars played and sounded great and as they never advertised and were a small builder in the uk the cost was cheap for the quality of the guitar. A players guitar rather than a fancy looking guitar thats all show and less go. I think they are the price of a mim strat but great hardware not chinese.

Das Musikding is your online store for building guitar effect pedals, bass effect pedals , guitar amps, bass amps, synthesizer and many other musical related electronics projects. You can get pedal parts or complete kits, for all stages of building experience. Effects are great for guitar and Bass! Guitar effect kits available are Distortion, Booster, Fuzz, Overdrive, Delay, Tremolo, Compressor, Switches, Loopers and many other. We also feature kits and modules by GuitarPCB.com and Molten Voltage Pedalsync. Amp kits are available by Madamp, great kits for a great price. Building guitar and bass effects made easy! You can get resistors, capacitors, potentiometer, knobs, jacks and plugs, aluminium and steel enclosure, transformer, wire and cable and many more things. Manufacturer are Wima, Alpha, Neutrik, Switchcraft and many more. Our shipping costs are low and the prices very good. If you need a special offer, just ask us!

Place one mic on each speaker at the same distance and orientation, and check the pair for phase cancellation by panning them to the same spot and listening in mono. The minute differences between the speakers, mics, and mic positions, combined with double-tracking, creates a monstrous presence when the tracks are hard-panned in the mix, and opens up a world of possibilities for separate EQ and effects processing. If you don't need the guitar to dominate the mix, you also can sum these mono-compatible tracks together to a single pan position for a noticeably bigger sound.
The problem is that most of those beginner guitar books just don’t have enough information to give you the tools that you need to advance past the curriculum in the book. They won’t tell you about some of the more important aspects of theory, and they generally won’t give you exercises or warm-ups that will help carry you into becoming an intermediate or advanced musician.

I hope the list is somewhat correct on peoples lists although it is just an opinion! and just a small thought and insight on angus young he might not make the top 50 for me he plays just a few chords and everything sounds the same, he is with a unique voice and a band who was made by bon scot that put ac/dc on the map!! I know of no really good guitar player that names angus young as their inspiration or was influenced by angus young it is just that his work was too simple!!
Paul Landers, of Neue Deutsche Härte band Rammstein has a signature guitar based on his custom-built guitar. It features a mahogany body with a maple cap finished in satin black with silver binding only around the front of the body. The neck is also made of mahogany and features an Obeche fingerboard with no inlays or binding. Hardware includes a hardtail tune-o-matic bridge and Grover locking keystone tuners. The guitar also feature chrome-covered EMG pickups; an 81 in the bridge, and a 60 in the neck. It also only has a single volume control and a 3-way pickup toggle switch.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at jvguitars@gmail.com .
Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.
The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.

Compressor: Compressors make loud sounds quieter and quiet sounds louder by decreasing or "compressing" the dynamic range of an audio signal.[60] A compressor is often used to stabilize volume and smooth a note's "attack" by dampening its onset and amplifying its sustain. A compressor can also function as a limiter with extreme settings of its controls.[61]

Even with a H-H configuration, you could utilize coil splitting to achieve single coil-ish sounds. While arguably this does not give a "true" single coil sound, if humbucker sounds are mainly used, this can be enough. My impression is that most people aren't using the middle position that much, I think the way forward is to try different pickup configurations to find out what you need.
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.

The design goal of these hybrid micro heads was to provide usable power from a compact digital power amp section combined with a real analogue preamplifier in a very small and light metal chassis. The amps each weigh about 1.1 lbs, and fit in one hand (Dimensions (W x D x H): 135mm x 100mm x 75mm/5.31” x 3.94” x 2.95”). These amps are advertised as 50 watt heads, so the power section is a special Class D design as might be expected. What is unexpected is the preamp design that includes a new type of vacuum tube (valve) called the Nutube 6P1, which is the result of Korg working with Japanese vacuum fluorescent display (VFD) company Noritake Itron Corp.(Ise Electronics Corp). As such, the Nutube is a dual-triode vacuum tube packaged similarly to a VFD "chip" which makes it mountable on a circuit board using holes and pads not unlike a DIP. The miniaturised flat package topography, low power consumption, and low heat, long life attributes of the Nutube are key contributors to deploying an analogue tube preamp in such a small, lightweight footprint. Power consumption is only 3.43 Amps which is provided by a DC19VAC adapter, but Vox rates the MV50 power output at 50 Watts. However, note the 50W rating is for a 4Ω load; power output specs are as follows: Max 50W RMS at 4 Ohms, 25W RMS at 8 Ohms, 12.5W RMS at 16 Ohms.


Have a Columbus series 3 superstrat. Jackson/charvel knockoff. It plays ok with a dimarrzio bucker and 2 single coils od unknown origin. It original had a locking trem which could only dive and I replaced with a FR that can only do same because I wouldn't risk routing the ply body. Anyway the interesting point (and I'd love to find out) is that under the "Columbus series 3" badge can clearly be see the faint etching of another badge in gothic script "Winchester". Any thoughts?
Here we have old "3-hole" this is another great Japanese Vintage Guitar! this one is over 40 years old wow! ...its wonderfully aged woods contribute to its rich great sound... this example is one of the greatest Martin style Copies from one of the finest "law Suit" Acoustic instrument builders of Japan Yamaha Nippon Gakki...This model is the very popular FG-140 RED LABEL ....JUST IN!...so more info soon to come please see the detailed pics of this guitar for a link to many more pictures ( 40 ) or more from every angle Very good- excellent condition If your wondering why we call this one "3-hole" is because someone in its past life had an electric pickup of some type and it came to us with 3 tinny holes in the top... we have since filled the 3-tiny holes one on upper treble bout and 2 below the rosewood bridge... we filled & clear coated so its all solid and is very hard to see but are their also a fine hairline crack threw the finish exists at the bottom of the neck the original owner said its been their more than 20 years and has not changed and is solid...if wanted after sale for free at your request fill sand it and fill with lacquer and sand and buff smooth I expect that would do the trick to cosmetically improve the look of that but its really fine as is... What is rare about this oldie but goodie its all original and even has the original gold lined Yamaha logo Hard shell case in pretty respectable shape too...see the extra pics ( I will have a link to those pics posted later ) for those details... Great sound and pretty EZ to play too I just Cleaned it to remove the grime but leave all the original patina and also dehydrated the woods and she drank it up and after drying we finished it of with a fresh coat of wax finish was applied the woods still shine like a shinny new dime.. great old guitar.. JVG Rated in Very good Original Vintage condition with its share of natural play ware visible upon closest inspection of the neck width is 1-3/4 @ nut and the action is set good at 3-16ths @ 12th fret.. the fretboard and frets still playing well no need for a refret some fret indentations yes but its still plays just fine at 80+%, top has aged naturally with nice Patina now and has several fine finish cracks etc..same as a well loved and played 40+ year old Martin would have at several thousand dollars less than a 40+ year old martin. This guitar has been restrung with New Martin Marquis Strings and sounds great...This one you have the option of buying an original vintage Yamaha Hard Shell Case..these cases are rare and hard to find now the handle was warn and has a replacement quick fix and it works perfectly...just $69.00 additional .
At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.
Through the 19th century, guitars were part of a musical ensemble. As performance spaces increased in size, stringed instruments like guitars were hard to hear over other instruments, especially horns. As a result, the traditional Spanish-style acoustic guitar—wooden with a flat top, a symmetrical hollow body, a sound hole in the center, and gut strings—began to change in size, shape, and construction. For example, in the late 1890s, Orville Gibson, founder of the Gibson Mandolin-Guitar Manufacturing Company, designed a guitar with an arched (or curved) top that was stronger and louder than the earlier flat-top design.
the top five in no certain order are…….. JIMI HENDRIX .NIO EXPLANATION NEEDED……..RICHIE BLACKMORE he broght the strat into metal and he led his leads perfectly back into the song ……… .EDWARD VAN HALEN he was the next innovater after hendrix…………DIME BAG DARRELL….he was just plain the baddast ass of them all…………..AND ENGWIE MALMSTIEN he did everything else……..there are lots of great guitar players . but .these five guys set the bar for everyone else
Seagull guitars were first manufactured in Quebec in 1982. Their goal was to introduce a high-quality guitar with all the essentials for a reasonable price. It goes without saying that they completed that goal, as Seagull guitars are still here today.Seagulls are great for both beginners and pros. They are durable and high-quality. They have incredible sound-quality and they have something for everyone. They make both acoustic and electric guitars at reasonable prices. Seagulls are easy to play even for beginners. Additionally, they strive to reduce the impact guitar manufacturers have on the environment. They use sustainable wood sourcing so that they can avoid deforestation. Reclaimed wood is often used in the production of Seagull guitars. 
Onboard effects had already appeared on various guitars, especially Höfner and Vox models, but these were not truly “active” in the modern sense. Alembic, with support from the Grateful Dead, was exploring active pickup systems, but these were still basically custom-made instruments. Both had a master volume and tone control with three-way select and a “band rejection filter tone switch,” also called a midrange bypass filter. Ovation was among the first to offer linear potentiometers to correlate movement with effect. Controls inside were mounted on a circuitboard with individual trim pots that can be adjusted to control the volume of each pickup.
Like many others, Reinhold Bogner (born in Ulm, Germany, like the EL84 tube!) started his career with Fender mods. He founded his company in 1989 in Los Angeles and succeeded in earning a reputation among guitar amp manufacturers. His brand became famous with models like the Ecstasy 100A and 100B, where "A" stands for American (with 6L6 tubes) and "B" for British (with EL34 tubes). Among its famous users, you'll find Steve Stevens and Steve Vai (apparently your name must be Steve to be Bogner's friend).
You’ll notice that once it reaches zero sound gets very muddy very fast. That’s because we have zero resistance between the signal and the cap. To prevent this, some people put a small resistor (10K or so) between the pot and the cap. That way we won’t affect pot operation at higher settings (510K is very close to 500K) but at lower settings it will prevent it from reaching zero as we’re always adding 10K in series.
{ "name": "Vintage Sunburst", "skuUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar/h82691000002000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 549.00, "formatedIntegerValue": "549", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"36,16,7500006,36 Months Promotional Financing,10/28/2018,0% Interest for 36 months*. 36 equal monthly payments required. Valid through,549.0,false,/pages/Gear-Card-Rewards.gc", "msrp": 832.00, "salePrice": 549.00, "listPrice": 549.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuH82691000002000", "displaySku": "H82691 000002000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H82691000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Thunderbird-Classic-IV-PRO-Electric-Bass-Guitar-Vintage-Sunburst/H82691000002000-00-140x140.jpg", "styleImgAlt": "Thunderbird Classic-IV PRO Electric Bass Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"4,392", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"345399726200", "restrictionType":"", "restrictionError":"" }
do you have any iOS devices? So far Garageband and Guitarism are the most convincing guitar emulators ive heard yet. Next to that, for VST i go with RealStrat. But still, its going to track midi for notes that do not exist on a guitar. So while it wont play those incorrect notes through realstrat, it will make exporting midi to tab or sheetmusic a nightmare. Dont sleep on the iOs stuff, particularly because of the input and control methods. You have no idea the difference between a fake strum on a touchscreen versus all manner of keyboard inputs. You spend most of your time trying to emulate plucking in VST guitar apps...

Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.
×