Doling out everything that an electric guitar newbie could possibly require for less than a hundred bucks, the Davison Guitars Beginner Starter Package with a full-size electric guitar (39”) is super-alluring from the very outset. While many so-called beginners packages reek of inferior quality, this full size black electric guitar plus accessories combo strives to deliver complete bang for your buck. And that’s exactly why this thrifty, but high value electric guitar package has garnered massive popularity, and has been featured in ‘Top 5 Electric Guitar Beginner Packs’ across most reputed websites.
I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.
I've been playing guitar for several years now so I have played a wide variety of instruments. Of course bigger companies such as Martin or Taylor are going to be higher up in the ratings because they produce very expensive guitars and their name has been widely spread. My first ever Yamaha six string, which after three years is still my favorite guitar, is amazing. Its deep and rich tones makes it a blast to play. I can find myself playing any genre for hours because of how reliable and durable it is. They are very well priced for there quality and I would label Yamaha as being the working mans guitar.
Firmly intended to compete with Gibson's ES-335, the Starfire IV, V and VI retain plenty of Guild style, not least the more spacious cutaways and the wooden foot tune-o-matic-style bridge. Placed side-by-side with an equally new Bigsby-equipped Gibson ES-335, the Starfire V somehow looks more 'retro', more 60s. The body here is made from mahogany laminates with a distinct striped figure under the Cherry Red finish, which was introduced with the first Starfire. Then, as now, it all creates a different aesthetic to the Gibson ES-335. A major difference is the control set-up, which here augments the Gibson layout with a smaller knobbed master volume control on the treble horn, just behind the three-way toggle pickup selector. The pickups here replicate the early-60s introduced 'Anti Hum Pickups' and are period correct, along with the black plastic, chrome-tipped control knobs. It's a fairly weighty guitar for a semi, thanks to the full-length maple centre-block, and has a classic strapped-on feel. It is, of course, thinline depth and feels every bit an ES-335. It has a 'clean' sound, with low-end definition, slightly bright on the treble pickup with decent sustain and, importantly, a very respectable feedback threshold. It likes volume, and while similarly evocative of virtually all those classic styles, it's the stage version and effortlessly takes you on to early The Who, The Jam or Britpop voices, while seemingly equally at home with rootsy, strummier Americana.
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
The effect of amplifier coloration can be emulated using a parametric EQ, where you'll probably find you need to add some upper mid-range boost to get the same brightness as from an amp. Note that, if you're using a software amp modelling plug-in, you'll still get the best results if you feed your guitar via a high-impedance DI box — plugging it straight into a soundcard's line input is likely to result in a drop in level and may even affect the sustain and high end of the guitar sound due to the pickups being loaded by the impedance of the input circuitry. This does not apply to active pickup systems which, in effect, function as a combination of pickup and DI box.
Others, however, will look to Jimmy Page, Pete Townshend, or the Beatles, or credit the first recorded use of a fuzz box in Britain to Big Jim Sullivan’s performance with a custom-built Roger Mayer fuzz on P.J. Probey’s 1964 No. 1 hit single ‘Hold Me’ (according to Mayer himself)—or, supposedly, Bernie Watson’s solo on Screaming Lord Sutch’s ‘Jack The Ripper’ in 1960. Or, a little later, the one more of us remember, Keith Richard’s worldwide smash-hit fuzz riff for the Stones’s ‘(I Can’t Get No) Satisfaction,’ courtesy of a Maestro Fuzz-Tone.
One unique application of a fuzz pedal involves starving the pedal of voltage--which will produce a scratchy, velcro-like tone. This is desirable by some musicians because it is a highly unique sound and is often employed by more avant garde musicians. This sound can be achieved by purchasing a power supply with a sag output, or using a nearly dead battery, although the pedal won't last long when using that method.
Well, I’m glad you asked. Don’t be fooled by the price and the size of this thing, as it’s a veritable Pandora’s box of effects waiting to be unleashed upon the world. You have over 75 onboard effects to choose from including distortion, compression, modulation, delay and reverb modelled on some of the biggest hitters in the industry, like the Boss DS-1, Metal Zone, Fuzz Face, Big Muff, Pro Co rat and many, many more. The team at Zoom have also thrown in a simulator to allow your guitar to sound like an acoustic.
4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.

As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.

Despite what appears now to a somewhat dated design (all the quasi-organic shapes inspired by Alembic at the time are tough to love with the passage of time), Martin’s 18 Series electrics are actually quite comfortable and yield a versatile number of useful sounds. The neck profile is quite round, not unlike many acoustics, but very easy to play. The frets are small and squarish, which makes them a bit awkward for blues-style bending.
Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.
Before I get started, one quick note of caution. Because you need to play 'through' Cubase in order to hear the effects, you'll need a low-latency system — which means a fast computer, and a good audio interface, with quality ASIO or Core Audio drivers. Even if an interface has a 'zero‑latency' monitoring feature, that won't do you any good, as it will simply route the input signal to the output, without going through Cubase or any of its plug‑ins, which kind of defeats the purpose… Preferably, you should also have an interface with a high‑impedance input (suitable for guitar and bass). Many modern interfaces have an 'instrument input' which will do the job, but if not, you'll need to use a guitar‑friendly preamp, compressor, or similarly 'neutral' effect to feed a line input (or use a DI box).
But for all its light weight, this classical guitar shows off a stunning cedar top and rosewood fretboard. The inlay is just as elegant, and to keep the guitar’s profile looking good, the neck has a 3-ply construction style to prevent warping. The guitar has a matte finish, which gives it an “old-school” appearance, and the matte finish is great for photo sessions: no glare.
When I received this Epiphone LP Special II Les Paul Electric Guitar, Vintage Sunburst I discovered there are cracks in the wooden body, under the paint. I can tell that the wood was cracked before it was painted because the paint flows into the crack in one instance on the back, is visible up over the "shoulder" close to the strap peg and can be seen under the paint on the front. In another instance the paint bridges a crack on back below the cutout shoulder and can be seen under the paint in the right light front and back. Is this normal? (There was no sign of shipping damage on either the outer carton or on the inner product box). Regarding playing, the bass strings buzz on the frets when fretted (not my fingers) which probably can be corrected by adjusting the bridge. I was under the impression that Epiphone guitars were ready to use right out of the box. I have contacted Epiphone/Gibson company to advise on the cracks and the buzzing bass strings. I am concerned that the cracks may get worse, and if this is this normal for a guitar in this low price range made in china. I got a reply from Gibson Customer Service which said "We would need to see pictures, but it would be highly unusual if there actually were cracks in the wood. The set up on an instrument can shift during shipping and handling, so a new instrument may need to be set-up." I will probably return this instrument and buy one in person from a music store where I can see and try the product before buying it.
Many modern players use the first joint of the thumb against the back of the neck, and almost on the upper binding, sort of like gripping a baseball bat, so they can reach over the neck with their thumb tip to play bass notes on the E and A strings while picking melodies out with the other fingers. Tommy Emmanuel, and Andy McKee are particularly adept at this. You’ll need to experiment some to find what works best for you.
mid-1939 Popscicle bracing on D body sizes. See the above picture for what the popsicle or T-6 or upper transverse graft brace is. The popsicle brace was added to the underside of the top of the guitar, below the fingerboard. The brace was added to help prevent top cracks alongside the fingerboard. Since the first D body size was made in about 1934, problems obviously came about and Martin added the brace by 1939. The brace does not appear in pre-1939 Martin D-sizes, but transitioned in around 1939, and is present in all 1940 and later D models. Without the popsicle brace, the top is attached only by the strength of the spruce fibers and a 1/2" x 2" glue area where the top overlays the soundhole #1 brace. With the popsicle brace there is an additional 1" x 2" glue surface directly under the fingerboard. Unfortunately the popsicle brace can deaden the sound of the upper bout area of the soundboard, and the popsicle brace doesn't always prevent the top from cracking along the fingerboard either. As people search for why the old Martins sound so good, they examine every aspect of them and the popsicle brace usually enters the conversation. Here's some data on popsicle braces:

A vintage pickup is literally old. “Vintage-style” usually means a new pickup designed to sound like an old one. Vintage and vintage-style pickups generally have only moderate output. The term “vintage” has most often been applied to designs that originated before 1970, though as we move forward in time, so does the expiration date on “vintage.” But for now, at least, all vintage-style pickups are passive.
By far the best bang for the buck. These guitars are beautifully made with good attention to details such as fret ends, bridge fit and neck joints. They also have wonderful finishing and are made from quality materials. The 'snob' factor is the only thing against them, they are not Gibsons. Martin's or Fender's, BUT they do play just as well and quite frankly, only those with a good ear and perfect pitch could tell the difference in a rock environment. I have Fender, Gibson, Taylor, Columbus, Washburn, Squire and Maccaferri Guitars, as well as Richwood. Sadly like the great majority of guitarists, the guitars themselves are more capable than I am, and I am happy to admit it. Having an exceptional guitar will not make you an exceptional guitarist, just as a more professional camera won't make you a professional photographer. The Richwood Artist / Master series of guitars are good, believe me! For the average guitarist, pro or am, you can buy more expensise guitars but not better as far ...more
Berry snapped one up immediately in 1958 and has played the ES-335 or its slightly fancier relatives the ES-345 and ES-355 since then. A few years later the model was embraced by Freddie King. Alvin Lee made history with an ES-345 at Woodstock, speeding through “I’m Going Home,” and Larry Carlton’s incredibly lyrical ES-335 can be heard on great Steely Dan albums including The Royal Scam and near-countless other sessions. Whether equipped with humbuckers or P-90s, semi-hollow body guitars sound sweetly beautiful, but can also grind. Ultimately, however, they remain a middle ground between the electric solid body and the hollow body models.
A band can sound good with conventional amps and PA gear. But it takes musicians who are sensitive to each other as well as the overall sound of the band. It takes a skilled soundperson who has the gear (and knows how to use it) and enough time to get a proper soundcheck.  Going direct attempts to solve these problems. Adding IEMs (In Ear Monitors) solves more. Yes, you don’t have amps blaring behind you. No, you don’t look like Jimi at Woodstock. Yes, you have to get used to the way things sound and learn how to perform without amps. 
Add bite or presence by boosting between 2kHz and 6kHz, depending on the tone you're after. Little over 4-5kHz is produced by a guitar speaker, though going for a brighter DI'd clean sound is quite legitimate for artistic reasons. Similar-sounding electric guitars that may be conflicting within a mix can be separated to a limited extent by adding bite at different frequencies, though choosing two different-sounding guitars and/or amp sounds and examining the arrangement carefully usually works better. As a rule, single-coil guitars are best for cutting through a busy mix without taking up too much space, while humbucking pickups create a thicker sound which may be beneficial in recordings where there is only one guitar part.

However much you swap your guitar’s pickups, strings, and wiring configuration, tweak your amp, or revamp your pedalboard, you will never achieve the golden tone that rings in your head if you don’t take one tip to heart: it all starts with the wood. Sure, these are electric guitars, and all the electronic components in the sound chain will affect what comes out of the speaker, but they are acoustic machines first and foremost. Hit the strings with your guitar unplugged, and it still rings and resonates, and the sound you hear—even with no electronic devices attached—still defines the core of your tone. And to make sure this is the right tone for you, or to avoid fighting a tone with endless component tweaks that never seem to satisfy, you need to understand a little bit about how all that wood sounds.
Here we have another great Yamaha Its Sound is truly WELL beyond its price point someone will be very pleased. aprox..1972-74 YAMAHA FG160 WOW! . ...This is a Gorgeous MARTIN style REPLICA and for the money compares very well to the original in quality materials used..sweet vintage SPRUCE TOP now wonderfully ambered in color from age just too cool, The Back - Sides & Neck are all made from choice AAA Mahogany just what you would expect from an expensive Martin or Gibson...only you would expect to pay much more for one of those , but this is a rare early non "Nippon Gakki" model with the Red Label from Korea.. These early issue Red Label Guitars from Korea utilize the very same materials that were made in Japan. These components were used under strict quality control and 100% assembled in Korea from the very same vintage wood - components & parts as the Japan made Yamaha's. We have had many of these Red Labeled Yamaha's in the 180's & 160's currently and over the years I see up close and in person the very high grade AA mahogany neck s sides & back & the same nice nickel tuners & hardware the very same one piece solid neck no scarf joint at the back of the headstock area like the later Korean & Chinese examples ... This era exhibits just the same just as nice woods as those Japanese big dollar players but " SOME" not all are hidden treasures and are still a real bargain today when compared to the Japanese Red Label versions or a Martin or even Japan made models of this & finish & the materials on this guitar are very nice! This guitar does not take the back seat to the Red Label Nippon Gakki version at all. The action is very EZ to play and the TONE is simply wonderful..The Condition is very good++ to excellent vintage it is not mint,and it is not has natural minor play wear and dings associated with a well loved and played quality guitar it has all the rich patina now of a true vintage acoustic and is quite beautiful in its own right. This guitar has a good history of care its a California guitar where the climate is stable and quite favorable to guitars and was adult owned & loved. This guitar has the preferable a nice MEATY U Shaped Premium Mahogany one piece solid NECK, the frets are still good, The Rosewood is gorgeous too it looks to be Premium grade as well..You will not be disappointed with this guitar at this price the sound is rich like a an expensive $1,000+ guitar, big tone repairs, structural damage..It comes with a new set of Martin strings installed ready to play out of the box. TRULY STUNNING, SEE MORE ... This baby is nice and sweet in person...very nice, , with a classic MARTIN LIKE feel & Sweet-Tone that simply is very hard to beat. The neck is STRAIGHT and the frets are fine w/plenty of life left,this baby plays real nice she stays in tune very well.. .nice workmanship & choice select materials used....You will not be disappointed with this FINE YAMAHA FG160 guitar with NICE TONE & SOUND...its a real Great Player ....This guitars condition is rated at a 8+ Very good+ or better and is very good to excellent condition only a few very minor dings can be seen. this is a real Vintage guitar" and as you can see its in Gorgeous shape!. no known problems cracks-breaks-repairs with no other known issues at all. This one is is 100% READY TO GO!!! its in very good to excellent condition a solid 8+ OR BETTER. This .
“The V100MU is everything I want in a guitar. The variety of tones from the Wilkinson W90SK pickups combined with the vari-coil enabling me to go from single coil to quasi double coil whilst the roller bridge and ‘classic’ vibrola is something I’ve never seen before on a contoured topped guitar. It really is a thing of beauty not just to look at but to play.”
Here's a fresh one from the JVG Vault... vintage tone much like an old classic Martin Acoustic has some wear and has the "feel" just feels great in your hands and plays & sounds wonderful. Good volume and rich sounding lows and very nice.. condition rated at a solid 8.5 / 10 or better no cracks no repairs and plays nicely with original nut & saddle still in place , optional change nut & saddle & set up add $80.00. Please SEE MORE FULL SCREEN HIGH RES PICTURES HERE:
Time controls the length of time between any two repetitions of your signal. It is most often measured in milliseconds (ms). Most delay pedals don’t have a delay-time readout that would enable you to determine exact delay times in milliseconds, so you typically just adjust the Time knob to get an approximate time based on the unit’s available range. For instance, the Boss DD-7 (street $179) has a Mode knob that selects between four time ranges—up to 50 ms, 51–200 ms, 201–800 ms, and 801–3200 ms—and the Time knob then adjusts the setting within the selected range.
The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
Separate bass amplifiers which do not contain speakers, often called "heads" or "amp heads", are usually integrated units, with a preamplifier, equalizer (bass and treble controls) and a power amplifier combined in a single unit. Some players use separate preamplifier/power amplifier setups, where one or more preamplifiers drive one or more power amplifiers. In the latter example, a bass player can use a bass-specific power amplifier or use a sound reinforcement system power amp. Bass amp heads are available in high-wattage power ratings that are not available in combo units. For example, the Ampeg SVT8-PRO amp head puts out 2,500 watts RMS at 2 ohms, a power level that is high enough for the largest 8x10" cabinets and the largest venues (stadiums, outdoor festivals, etc.).

• We'll add EQ to give some polish and let the guitar cut through a little better in a mix. Enable a stage in the standard channel EQ (which comes after the inserts in the signal chain), and choose the Parametric II response. Add a boost of around 4‑5dB at 3.5kHz, with a Q of 0.2.This screen shows the VST Audio Channel Settings and the roster of effects used to create our basic guitar rack.
Guitar pedals are perfect for this. Firstly, and perhaps most importantly, because you should never try to circuit bend anything mains-powered, they can run off 9V batteries. Secondly, their internal circuitry is usually very simple, and they already have audio I/O. Thirdly, you can get them for almost no money from eBay, and the other tools required — soldering iron, wire, switches, and so on — are also very cheap. There's an almost infinite number of sonic possibilities to be explored here, from finding new ways to process a signal (of course you don't just have to use them with guitars) to creating a machine that goes 'Eeeeeeooooowsquelch blipipipip' in a different way every time you turn it on — and who would say no to that for less than a tenner?
A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.
Although Ibanez’s S series is designed to be far more versatile than the RG guitars, its Iron Label collection is built for one, brutal purpose: heavy metal. The SIX6FDFM represents exactly what we consider a ‘value-for-money’ guitar: It sports many premium specs, is skewed towards a single use, and, at a little under $1,000, won’t hemorrhage your bank account.
Equalizer: An equalizer is a set of linear filters that strengthen ("boost") or weaken ("cut") specific frequency regions. While basic home stereos often have equalizers for two bands, to adjust bass and treble, professional graphic equalizers offer much more targeted control over the audio frequency spectrum.[64] Audio engineers use highly sophisticated equalizers to eliminate unwanted sounds, make an instrument or voice more prominent, and enhance particular aspects of an instrument's tone.[65]
A. If you're a beginner or you're buying for a beginner, you'll probably want to start with a fairly basic guitar, just in case you don't like playing. You can also find sets or starter packs that come complete with a small practice amp, a lead, a strap, and other useful items for new guitarists. These usually work out cheaper than buying the items separately, but not significantly cheaper, so don't worry if you have your heart set on a guitar that doesn't come as a starter pack.
The Last of Us™ has been rebuilt for the PlayStation®4 system. Now features full 1080p, higher-resolution character models, improved shadows and lighting, in addition to several other gameplay improvements. 20 years after a pandemic has radically changed known civilization, infected humans run wild and survivors are killing each other for food, weapons and whatever they can get their hands on. Joel, a violent survivor, is hired to smuggle a 14-year-old girl, Ellie, out of an oppressive military quarantine zone, but what starts as a small job soon transforms into a brutal journey across the U.S. The Last of Us Remastered includes the Abandoned Territories map pack, Reclaimed Territories map pack, and the critically acclaimed The Last of Us: Left Behind single-player campaign that combines themes of survival, loyalty, and love with tense, survival-action gameplay.
One of the greatest things about being a touring musician is having the opportunity to see, hear and play with some of the greatest guitarists on the planet. Over the course of my career, I’ve performed with legendary guitarists like Ted Nugent, Steve Cropper, and Glen Campbell, to drop just a few names. Playing lead for a headline act like Toby Keith also allows me to watch fantastic guitarists like Keith Urban and Brad Paisley take the stage before me.
We use technologies, such as cookies, to customize content and advertising, to provide social media features and to analyze traffic to the site. We also share information about your use of our site with our trusted social media, advertising, and analytics partners. You indicate your consent to this use by clicking “I Agree” or by continuing to use this website. View details.
The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.
Fender is well known for producing excellent quality musical instruments. Not just today, instead it always has topped the list of best guitar brands as an icon in the music history of America. It produces a brighter tone, accompanying single coil pickups rather than the humbuckers. The single coil pickups are specially designed in a way scratching through the mix with the glorious sound to produce the characteristic tone. The unique part of Fender guitars may cause issues with humming.

Yes, I see your point, quite. This article was not aimed at experienced Strat stranglers, but more at their parents or relatives, who may have wished to give them a pedal as a holiday gift but didn't know what to purchase or what the effects might be. We thought a simple guide might be helpful for the completely uninformed. Obviously, we're not an established guitar journal, so thank you very much for your helpful and constructive critique.
Guitar effects pedals can range from just £30 each for cheap, Chinese-made copies to over £200 for boutique hand-made pedals with unique sounds. For the average good-quality pedal (made by a company such as BOSS, for example), you’ll be looking at around £50-£100. This might seem like a lot for one effect, but if you’re careful that one pedal could last years.
The Electro-Spanish Ken Roberts was additionally, the first instrument to feature a hand operated vibrato, as a standard appointment found on every model.[12] The vibrato device was called the "Vibrola" and was invented by Doc Kauffman.[12] [13] It is estimated that fewer than 50 Electro-Spanish Ken Roberts were constructed between 1933 and 1937; fewer than 10 are known to survive today.[7][8][9][10]
The three pickups were originally identical in their construction. With the rising popularity of using pickups in combination, Fender introduced a new feature in 1977 coinciding with the standard 5-position switch; a reverse-wound, reverse-polarity middle pickup. As the description implies, the magnetic polarity of this pickup is opposite the other two, as is the direction of the wire winding around the bobbin. This provides a hum-canceling effect (removing hum induced by poorly shielded, medium to high output AC devices) in positions 2 and 4 on the selector switch. This principle had been known for many years beforehand, being applied in the form of Gibson’s humbucking pickup and Fender’s own split-coil pickup used on the Precision Bass.
yea seriously as the other reply said especially when it comes to Japan you can no longer just go with the American is better mantra. Tell that to all the amazing musicians who play top of the line regular or custom models from yamaha and Takamines. IMHO especially Takamines are on the cutting edge and even some of their cheaper guitars which are now made in china(the topshelf ones that are typically roughly $1200+ are Japanese made) . Your selling yourself short and also in many cases overpaying if you'll only look at American made. Not to mention many of the American companies even on the $30000+ models mix and match where their supplies come from and or where the labor/construction of the guitar takes place. Martin is one of only American companies that does everything in America but they are an increasingly overpriced guitar. I love any old Martin I touch at a yard sale or older family members house but I'm totally underwhelmed by the newest ones I try at guitar center.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
In recent years, convolution reverbs have become both affordable and commonplace. These differ from synthetic reverbs insomuch as they work from impulse responses (or IRs), recorded in real spaces to faithfully recreate the ambience at the microphone's position when the IR was made. Sometimes these are referred to as sampling reverbs but there's no sampling involved as such, even though the process seems akin to sampling the sonic signature of a room, hall or other space.
Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.

What makes it truly stand out is the infinite Reverb this pedal provides. If you’re looking to get an all-around “stomp-box” featuring everything you ever wanted with remarkable sound output, this work of art by EH is designed to make you never think about getting another Reverb pedal. It can fit in any form of setup, and it is destined to conquer your flavor.
The Yamaha APXT2 is a 3/4 size version of the world's best-selling acoustic-electric guitar, the APX500III. This well-constructed, compact guitar makes a great companion when you're on the road. The APXT2 features an ART-based pickup system and Yamaha's proprietary tuner, offering great sensitivity and accuracy for quick tuning. The APX T2 also includes a gig bag.
Hi Ri - Squier Affinity Stratocasters and Telecasters come in lefty designs. Unfortunately they are a bit more than $100. There are some guitars in that price range but unfortunately I don't have a lot of experience with them. I would tread carefully at that price point, as really cheap guitars often end up being more trouble that they're worth. Good luck, whatever you decide!
{"pageName":"[gc] pdp: epiphone slash firebird limitededition electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"36-month,24-month,60 month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";L20582;;;;evar65=New-Guitars-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}

With a delightful dreadnought shape, this steel-string acoustic is made with a pressure-tested solid cedar top, with solid mahogany back and sides, all with a semi-gloss custom polished finish that allows the guitar to sing – and sing it does! The tonewoods combine to deliver a rich and bright sounding instrument, with plenty of warmth that would please the most demanding of guitarists.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.

Another early analog delay was the Binson Echorec, this unit recorded your guitar signal onto a magnetic disk much like a hard drive does. This unit was favored by David Gilmour of Pink Floyd. Analog delay pedals made their debut in the 70’s with the use of what was called bucket brigade chips. These chips move the signal down a line like the way an old bucket brigade would pass buckets of water down a line to put out a fire. The most famous of these pedals is the Electro Harmonix Deluxe Memory Man.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
The Gibson 2017 has a truly amazing setup and it played nicer and felt better than most models in its class. The tone is deep and throaty, and ab0ve all, it’s 100% Les Paul. What actually made the big difference in this electric guitar is the upgraded electronics and wirings with very minimal feedback and sustain. There is no buzzing or excessive string vibration. All that you get is a superb, perfect fit and finish.
Enter exhibit A: A late 60’s KENT short scale variation on the very popular (then and now) “Beatle” violin shaped bass. As you can see from the photos, this isn’t your average violin bass. While many, from the classic Hofner that Paul McCartney turned a few kids on to, to the Teisco and Black Jack Japanese models, didn’t stray far from the violin shape, this Kent takes a few attractive and stylish liberties with the standard template.
Perhaps not as famous as its brother, the EMG 81, this awesome EMG 85 still rocks and makes a worthy appearance in our chart. Perfect for the neck position (although equally solid in the bridge), the EMG 85 features Alnico V magnet-loaded close aperture coils to deliver a natural tone with a huge output, with no loss of clarity as the volume is pushed to its highest.
Therefore, if you are a beginner that is still struggling to find a product that comes shipped with other accessories, you should really pay attention to this model. Besides, although this is a full-sized guitar, previous buyers of the model have stated that the unit is not particularly heavy. Consequently, it can be used by teens without worrying about its size and weight.
Solid state and modeling amps are great amps to use for practice sessions. As well to bring it for small gigs and recordings that require their services. That is the reason why it is really hard to tell which one is above and try to suggest that a particular amplifier is better than the other. Having an own thing is what really is important here, and besides if you really sound good. The gears you will be playing with will equally sound as great.
Unfortunately this guitar does not come with a solid top, but for its price you really can't expect much. Still, it is much better than what guitarists of old had to start out with! If you are looking for a beginner's guitar to test the water or if budget is limited, then you should check out the Epiphone DR-100. It currently comes in 3 colors - Ebony, Natural, and Vintage Sunburst (my personal favorite among the three). The MSRP is 182.00 but most online guitar shops sell it for $109.
My brother owns a Norma acoustic guitar modeled on the Gibson Hummingbird. He bought it used in the mid 70s. Solidly built but only average sound. I would guess that like many Japanese made guitars from the 70s, Norma was not a "company," but simply an American sounding brand name chosen by a larger Japanese instrument manufacturer to market their guitars in the USA. I own a mid 70s Penco acoustic, same deal, name was used on Japanese made guitars marketed through the Pennsylvania Music Company, thus Penco.
Hi Learmonth! I always recommend Yamaha acoustics for beginners. The FG and FS Series both offer affordable, quality instruments. The question is what size you need to get. Some smaller kids do better on small-bodied guitars like the Yamaha JR2. Of course he would outgrow this by the time he is a teenager, though it would still be a cool guitar to have around. If you feel he can handle a full-size guitar look at something like the FG700S. It's a great starter guitar that will last him a long time, as long as he takes care of it. Good luck and let me know if you have any more questions.
Reverb sits at the other end of the tonal kaleidoscope, serving usually to add warmth and depth to a clean tone. Practically speaking, reverb simulates the sound of your guitar being played in a larger physical space. Imagine shouting at the top of your voice in a cloakroom. Then imagine doing the same thing in a church and you’re somewhere near there. Ok, that’s an extreme example, but approximating the sound as it reverberates around is quite a seductive thing when applied to a guitar. There are plenty of good examples of it being used to add a bit of life to an otherwise sterile clean tone.
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.
Eric Johnson: highly contoured two-piece select alder body finished in a “Thinskin Nitro” lacquer, one-piece quarter-sawn maple neck with a V-shaped profile, 12″ fingerboard radius and 21 polished frets, Fender/Gotoh staggered vintage-style machine heads eliminating the need for a string tree and three special-design custom-wound single-coil pickups with countersunk mounting screws. Other features include a parchment ’57-style pickguard, five-spring vintage tremolo, silver-painted block and ’57-style string recess with no paint between the base plate and the block. Colors include White Blonde, 2-Color Sunburst, Black and Candy Apple Red. Also available as a rosewood neck version with a bound round-laminated 12″-radius rosewood fretboard, a three-ply parchment pickguard, staggered vintage-style tuners, a custom tremolo block and four brand-new finish options (including Dakota Red), three of which (Lucerne Aqua Firemist, Tropical Turquoise and Medium Palomino Metallic) are exclusive to this model.
Open Loop Gain: Feedback Solid-state amplifiers are inherently nonlinear. They have a very large ‘open loop gain’ approx 20,000. The amplifier output is (feedback) to the comparator input to reduce the gain to approx 50. Therefore 99.9% of this feedback corrects all instability and non-non-linearity of the amplifier, as explained in amplifiers. The speaker also acts as a large microphone. All non-linear movements and vibrations within the speaker cone, (caused by reflected nodes, chaotic resonances etc) of which there are many, are regenerated back into electricity by the voice coil. This re-generated signal from the voice coil is inadvertanetly fed-back to the solid-state amps comparator input, and re-amplified back to the speaker as recycled distortion.
FINISH DRILLING THE HOLES After you have shaped and carved the body and the neck holes are drilled and the cavities routed out, you can preposition all of you parts and drill the last of the holes. Start with the pickup rings. It is good to assemble them first and then drop them into the cavity so you can line them up and mark where you will need to drill. Make sure they aren't crooked when you line them up. I like to have the neck bolted on so I can line them up with it. I do the same thing with the bridge. Be sure to check that the scale length is correct and that it is lined up with the neck as well. Drill the holes for the mounting screws and then the string through holes. Try to keep the drill as straight as possible when you do this because you will be going all the way through the body and if they aren't straight you will see it on the other side. This is the time that I wish I had a drill press.
There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out for more info.
King V has got to be one of Jackson’s most iconic guitar families. The one we are looking at here is a but underpowered compared to the original King V, however it also comes at a much lower price. The whole package is well made and quality control is top notch. It takes some time to get used to the Flying V body shape, but once you do you’ll refuse to go back. Aside from looking good, this thing also brings a mighty sound.

Originally equipped with P-90s, it wasn’t until 1957 that the most significant change was introduced: humbuckers. Humbucking pickups—two-out-of-phase coils wired together to cancel or “buck” the hum produced by single-coils—weren’t a new concept. But Gibson technician Seth Lover’s refined PAF (patent applied for) humbuckers produced a higher output with a clearer, fuller tone that solidified the Les Paul as the classic we know it as today. From Goldtops to Black Beauties and the ever-iconic sunbursts, Les Paul guitars come in almost limitless varieties, making them a staple of blues, jazz, rock, soul and country.
Its simple yet effective design and revolutionary sound broke ground and set trends in electric guitar manufacturing and popular music. Introduced for national distribution as the Broadcaster in the autumn of 1950, it was the first guitar of its kind produced on a substantial scale. Its commercial production can be traced as far back as March 1950, when the single- and dual-pickup Esquire models were first sold. The Telecaster has been in continuous production in one form or another since its first incarnation.[1] The Fender Telecaster has been mostly used in music genres such as country and rock, but is also sometimes used in blues and jazz.

We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .010 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!), cleaning and polishing. One of the best things about this guitar is the modification to a factory flaw that most TW's we've seen have. The finger board is too long from the nut to the first fret, thus most all of these we have seen will not intonate, thus not play in tune. We had a compensated nut, modified and installed on this one (see photo collage). I don't know where they acquired it, but it worked like a charm. Plays and sounds great. We also installed a new set of .010 "Round-wound" strings. Guitar looks near new and plays great. No case.
But is the Fender Deluxe really as good as the name suggests? We certainly think it is! Even though it would be easy to just write it off as an electric guitar for country music, it’s actually really versatile and can be used for any other genre as far as we’re concerned. This is thanks to two vintage noiseless pickup configurations, one on the neck and one on the bridge, and a strat pickup in the middle.

As auto wahs, envelope followers, and other dynamically controlled filter effects respond to your attack, you don’t want to limit dynamics with compressors and/or distortion pedals that reduce dynamic range. Most players also put wah pedals first in the signal chain—mostly to come before distortion effects—however Tom Morello is a notable exception.
My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!
Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.

The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
Shop Hourly Rate is $60.00 per hour. Since each guitar is unique, prices quoted are estimates and may be adjusted based on actual time involved. A final price will be submitted prior to actual work and price may need to be adjusted in the case of repairs that get more involved as the work progresses. (Please see the article on the 1975 Gibson Hummingbird for a good example of this.)
So Rad...It's ok...To think that we were going to get all the campaigns and multiplayer for all the Halo's was amazing, and the game itself when it works is amazing just like it always has been, but I bought my Xbox One just for this game and the fact that it was broken for more than half a year is a shame and honestly unfair to the consumer, I still give it 3 stars since it works decently now but it lost its potential to be an amazing game....Lots of people seem to be having issues with multiplayer and campaign achievements; however, I have not noticed any campaign issues other than one time when I accessed a terminal it would not let me resume my game but after a restart I found I had just hit a checkpoint so no work was lost.
Meanwhile, Royston, due to the loss of a lucrative government contract in one of its other companies, went into liquidation in 1969. As a result, Vox went through a series of owners including a British bank and Dallas-Arbiter. The AC30 continued to be built alongside newer solid-state amps, but in a series of cost-cutting moves different loudspeakers with ceramic magnets began to be used, as were printed circuit boards and solid-state rectification. Particleboard replaced some plywood parts in cabinet construction, and at one point an all-solid-state version was introduced alongside the classic tube-powered model. Rose-Morris, Marshall Amplification's British distributor, bought Vox in the 1980s when their deal with Marshall ended. They tried to reinvigorate the Vox brand, continuing to build the AC30 along with a few other decent modern designs. In 1990 they sold the company to Korg.

If you do find yourself at a concert and there’s not a Fender onstage, there’s an exponential chance that there will be a Gibson – if not both. Getting their start as a small mandolin manufacturer in Kalamazoo, Michigan in 1902, the brand eventually went on to start building guitars, inventing the archtop style of guitar by using the same building techniques as violin manufacturers. In the 1930s, Gibson had made their first electric guitar, but it wouldn’t be until 1952 that the brand would unveil what is still their most popular and iconic guitar ever built: the Les Paul. Now based out of Nashville, Tennessee, Gibson’s storied history is littered with the presence of some of the greatest guitarists of all time, including B.B. King, Chuck Berry, Slash, Jimmy Page, Pete Townshend of the Who, and Angus Young of AC/DC.
The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
The Gibson Mandolin-Guitar Mfg. Co., Ltd. was founded by Orville Gibson in 1902 in Kalamazoo, Michigan when he brought in a consortium of investors to finance expansion to keep up with demand. Orville had been selling his hand made instruments since 1894 and was awarded a patent for his one-piece designed mandolin in 1898. He also invented Archtop Guitars around that same time by applying similar lutherie techniques to those used on violins.
Guitar FX BOX does REALLY real-time DSP. Signal is sampled from sound card input, processed and then sent to the output with VERY LOW LATENCY. Unlike many other "real-time" audio programs, I/O delay with Guitar FX BOX is extremely low, virtually undetectable! This is achieved using DirectSound (or WDM streaming) for fast access to the hardware (sound card) and fast DSP algorithms optimized for real-time processing. Through DirectSound, latency is about 20ms with most sound cards, or even less. When WDM streaming driver is used, latency can go as low as 5ms! Nevertheless, exact total i/o latency still depends on hardware/drivers.
As a teacher I use a strat because it’s relatable, comfortable, and clean/clear tones. The gibson doesn’t have warmer overtones. That’s not a thing. It has weaker overtones, so a stronger fundamental. That’s why it sounds warmer/duller, and the fender sounds more lively/brighter, because the fender (longer scale) have more overtones to ring louder. That lets you hear mistakes more easily, and is helpful to improve more quickly.
The aim of this paper is to analyze through the finite element method (FEM) the dynamical behaviour of the ligno-cellulose composite plates from the structure of guitar. First it had been done the geometrical modelling of the structures from the plates, as the body of the classical guitar - size 4/4. Then the different structures were analyzed with finite element. The dynamical response had... [Show full abstract]

Fender is an American company founded by Clarence Leonidas Fender in the year 1946. The company headquarter is located in Scottsdale, Arizona, United States. The company provides a wide range of guitars to customers at an attractive price range. The company is best manufacturer of amplifiers and stringed instruments and has become the leading guitar brand in India too. - Musical-instruments-Online
When it comes to amplifiers that won’t break the bank, but sound loud enough to break your windows, Orange Amplification know exactly what they’re doing and they do it well! The Orange Crush 12 Solid State 12W 1X6 Combo is one of the best cheap amps in the music scene and one that can easily be used on stage and in the studio due to its legendary tone and reliability. This Orange Crush 12 Solid State 12 watt amplifier features a 6” Voice Of The World speaker custom designed by the team at Orange amplification to deliver punchy and articulate sound.
Vox Amps - Vox is one of the largest musical instrument producers in the world and their products were utilized by almost every major music group during the nineteen sixties. From The Beatles to Lawrence Welk, VOX was the "voice" of a generation of musicians worldwide. Now they continue to produce their distinctive amps and effects, embracing modeling technology while retaining tube amp products, and at times combining them. They also produce instruments and other guitar/bass related gear.
For the metalheads, Ibanez has their Iron Label series in addition to the signature models. These guitars are absolutely metal-oriented, with no-nonsense designs that provide exactly what you need for intense shredding without gimmicks. Ibanez Iron Label guitars are based on the S and RG platforms and come in 6, 7 and 8-string varieties, all with fast, shreddable necks. The RG models even have an onboard kill switch so you can do manual strobe effects without the need for a pedal.
At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).
The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
Compressor effects help you control the volume variations of your guitar. The compressor basically makes the loud parts softer and the quiet parts louder. This can help you fatten up the sound of your guitar as the overall sound will have much more sustain and often the low-end becomes more pronounced. Some compressor pedals are also sold as sustain pedals, which certainly does give a clearer idea of one of the ways the effect can be used.  
Unlike fuzz and distortion pedals, booster effects typically are engineered to boost the signal reaching the amp without adding coloration. Some booster pedals do slightly fatten the tone of the guitar by overdriving the preamp stage of the amplifier. They can be very useful in getting your amp to break up and produce musical-sounding distortion at lower volume levels as well as adding clarity to your solo riffs. A booster pedal can become an essential part of your rig when you have more than four effects in your signal chain or 18 feet or more of cabling between your instrument and amp.
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!
The Gibson L5, an acoustic archtop guitar which was first produced in 1923, was an early “jazz”-style guitar which was used by early jazz guitarists such as Eddie Lang. By the 1930s, the guitar began to displace the banjo as the primary chordal rhythm instrument in jazz music, because the guitar could be used to voice chords of greater harmonic complexity, and it had a somewhat more muted tone that blended well with the upright bass, which, by this time, had almost completely replaced the tuba as the dominant bass instrument in jazz music.
Paramount: Around 1930 Martin made about 36 guitars with strange construction. A style 2 size body mounted into a larger rim and back of rosewood, small round soundholes around a "lip" that joins the outer rims to the inner rims, no soundhole in the top, 14 frets clear, dot fingerboard inlays to the 15th fret, rounded peak peghead with standard Paramount banjo peghead inlay, banjo-style tuners, four or six strings.

Single coil pickups are the simplest to wire because they typically have only two leads – hot and ground. Some humbuckers have their coils connected internally and are pretty much the same to wire as single coil pickups. That’s why we will call them both “two conductor pickups”. Ground leads are typically connected to a common grounding point and hot leads are switched in and out of the circuit. Let’s take a look at standard Strat-style switch.

TC Electronic has literally changed the game with their new polyphonic tuner technology that lets you tune all of your strings at once, no matter what tuning you're using. This is the only logical choice when it comes to pedals, although if you're interested in other formats such as headstock tuners and rackmount options, check out our reviews of the best guitar tuners on the market.

I ordered this for my 6 year old nephew for Christmas. He wanted one because I had just recently bought my 3rd. I thought a smaller one would be nice for him to start learning. Just opened the box and the amp doesn’t work! At all! Light turns on but nothing else happens! Hooked guitar up to my own amp and it sounds nice so it’d definitely not the guitar or cords fault. Trying to get a replacement but no luck.

Situated just under the Spectrum 5 were the Teisco K guitars. Indeed, these Ks may have been introduced slightly before the Spectrums, since they appear in a 1966 Japanese Teisco brochure that does not contain the Spectrum. A second ’66 Japanese Teisco brochure contains both Ks and Spectrums. The K guitars were very similar in profile to the Spectrum, except that the horns were not curved, and flared out more or less equally in a more tulip shape, though still pointing slightly inward. These still had the German carve relief, 22-fret rosewood fingerboards, plus the new hooked headstocks. Inlays, however, were dots, and the vibratos were the more pedestrian Japanese version of the Bigsby. Pickguards were the new striped metal affairs introduced the year before, extending from above the strings down through the lower bout control area.
I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.

The auctions continue on our eBay store, including last remaining production samples of several models, and other unique instruments, including made in Japan JP models, Triturador basses, Tony Campos Signature Tremor basses, acoustic guitars and accessories. Check out the current listings, there will be new items posted every week:

Since 1994 The Music Zoo has been a trusted source for musicians around the world. We've located guitars for Slash, sold guitars for Steve Miller, held performances by major artists like Steve Vai, built thousands of customer relationships, and helped countless enthusiasts find just the right instrument. Today we look forward to finding your next guitar!
Roland has come a long way from its humble beginnings back in the early '70s as a rhythm machine manufacturer. The company grew to produce various other instruments and amplifiers, and is now one of the biggest music gear manufacturers in the world. With so many guitar brands under their name that could produce amps for them - like Boss and Line 6 - they still take the effort to build their own branded amps, and the success that they are enjoying is proof that they are doing the right thing. Their most popular amp is still the Roland Jazz Chorus, as used by artists like Albert King, Andy Summers, Metallica's James Hetfield and Kirk Hammett, Robert Smith of The Cure, Jeff Buckley and many more. These days they have a variety of amplifiers in the entry to mid-tier market, most of which continue to garner great reviews.
The lowest note on the double bass or four-stringed electric bass is E1, two octaves below middle C (approximately 41 Hz), and on a five-string it is B0 (approximately 31 Hz).[22] The requirement to reproduce low frequencies at high sound pressure levels means that most loudspeakers used for bass guitar amplification are designed around large diameter, heavy-duty drivers, with 10", 12" and 15" being most common. Less commonly, larger speakers (e.g., 18") or smaller speakers (e.g., the 8x8" cabinet, which contains eight 8" speakers) may be used. As a general rule, when smaller speakers are used, two or more of them are installed in a cabinet (e.g., 2x10", 4x10" and 8x8"). For 12" speakers, combo amps and cabinets are available with 1x12" and 2x12"; less commonly, 4x12" cabinets are seen. For 15" speakers, combo amps and cabinets usually have 1x15", although 2x15" and even 4x15" cabinets exist (Lemmy Kilmeister of Motorhead used 4x15" cabinets). A small number of 1x18" bass cabinets are sold (e.g., Trace Elliot).
Body Body shape: Double cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Swamp Ash body on translucent and burst finishes, Basswood on solid finishes Body finish: Gloss Orientation: Right handed Neck Neck shape: C medium Neck wood: Hard-rock Maple Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Gloss Fretboard Material: Rosewoo
The Guitar Store is not only the best guitar store in Seattle, but the best guitar store in the WORLD. First of all, the staff are incredibly amazing, lovely, hilarious and helpful. My bandmates and I are not the most knowledgable in terms of gear, and the first time we came in wanting to get our first our ever guitar petals, Blake actually drew a graph of sound to explain how guitar pedals worked. They are the absolute best. Helping us out and going above and beyond what staff should be expected to do. Hands down my favorite guitar store in Seattle, great selection, prices and above all the attention to detail and friendly attitude of the staff. Can't rave enough! Definitely found my guitar store for life! Would recommend for all your guitar needs :)
The Meisterklasse is a high-end harmonica on the modular system, made in Germany, featuring chrome-plated cover plates, an anodised aluminium comb, and extra thick 1.05mm nickel-plated reeds. One other feature that sets the Meisterklasse apart from most other Hohner harmonicas are its full-length cover plates, which extend all the way to the ends of the harmonica's comb rather than sharply angling down before the ends to form an adjoining surface parallel to the reedplates and comb. The only other Hohner harmonica possessing this quality is the curve-framed Golden Melody.[25]
When two pickups are wired in series, a good portion of the treble frequencies is lost because the long pickup wire works like a resistor. Any resistor in the signal path will suppress the signal. The formula works like this: The longer the wire, the higher the resistance, and the more treble is lost. We all know this from guitar cables: When you use a very long guitar cable, the sound isn’t as detailed and transparent as it is with a shorter cable. A long cable acts as a resistor.
{ "thumbImageID": "Classic-Series-50s-Stratocaster-Electric-Guitar-Surf-Green-Maple-Fretboard/510136000849063", "defaultDisplayName": "Fender Classic Series '50s Stratocaster Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "2-Color Sunburst Maple Fretboard", "sku": "sku:site51273887999809", "price": "799.99", "regularPrice": "799.99", "msrpPrice": "800.01", "priceVisibility": "1", "skuUrl": "/Fender/Classic-Series-50s-Stratocaster-Electric-Guitar-2-Color-Sunburst-Maple-Fretboard-1273887999809.gc", "skuImageId": "Classic-Series-50s-Stratocaster-Electric-Guitar-2-Color-Sunburst-Maple-Fretboard/510136000063063", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Surf Green Maple Fretboard", "sku": "sku:site51273888000577", "price": "799.99", "regularPrice": "799.99", "msrpPrice": "800.01", "priceVisibility": "1", "skuUrl": "/Fender/Classic-Series-50s-Stratocaster-Electric-Guitar-Surf-Green-Maple-Fretboard-1273888000577.gc", "skuImageId": "Classic-Series-50s-Stratocaster-Electric-Guitar-Surf-Green-Maple-Fretboard/510136000849063", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Daphne Blue Maple Fretboard", "sku": "sku:site51273888000429", "price": "799.99", "regularPrice": "799.99", "msrpPrice": "800.01", "priceVisibility": "1", "skuUrl": "/Fender/Classic-Series-50s-Stratocaster-Electric-Guitar-Daphne-Blue-Maple-Fretboard-1273888000429.gc", "skuImageId": "Classic-Series-50s-Stratocaster-Electric-Guitar-Daphne-Blue-Maple-Fretboard/510136000265063", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Fiesta Red Maple Fretboard", "sku": "sku:site51273888000343", "price": "799.99", "regularPrice": "799.99", "msrpPrice": "800.01", "priceVisibility": "1", "skuUrl": "/Fender/Classic-Series-50s-Stratocaster-Electric-Guitar-Fiesta-Red-Maple-Fretboard-1273888000343.gc", "skuImageId": "Classic-Series-50s-Stratocaster-Electric-Guitar-Fiesta-Red-Maple-Fretboard/510136000322063", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }