The instruments have been set up at the factory. However, time, temperature, and transportation are a few of the many things that can cause a guitar to go out of "intonation". We recommend that you get your new guitar set up by a qualified luthier upon delivery. We recommend taking it to a qualified guitar tech for a set up. They will adjust the neck and bridge to take out the buzzing. We ensure that before shipment there is no evident of fret buzz before shipment and the guitar plays beautifully since our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. We believe that your Local Guitar Shop can properly and safely adjust the truss rod and setup the guitar correctly for issues of fret buzz and bow neck. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod.
That's right. It's neck first, then bridge height, then intonation (at least the way I do it). Nut height can be taken out of the equation by putting a capo on the first fret, so it can be sorted out later if there are any problems with it. Of course if you were to put a capo on the first fret, you'd need to compare that with the 13th fret when setting up the intonation.
But who are we to judge a guitar master? We're just writers just trying to make a living. What we needed was to consult working musicians, the guys touring the country like pariahs of the Muse, the guys of metal from Drowning Pool to Warbeast, the guys of blues from Hash Brown to Smokin' Joe Kubrick. I needed to ask the guitarslingers who make their guitars bleed on stage night after night.
Ibanez are one of the best known of the more contemporary style guitars with artists such as Satriani and Vai on their books. This particular model, the RG 450 Deluxe, boasts a layout which traditional Fender players will be familiar with, but it's a very different guitar. It is a more compact instrument than the Stratocaster and with two humbuckers separated by a single coil, the pick-up system allows you to create some thick tones. In fact if you play around with the five way selector you can get just about any tone you could want. The body shape is very sharp and clinical and with jagged bolt inlays and the traditional Ibanez pointed headstock the guitar is very recognisably Ibanez. It also features a quality tremolo unit and two full octaves on the fingerboard with wide cutaways for access. This is an excellent alternative to the Gibson or Fender style dichotomy that dominates the market. If you're searching for your own sound, somewhere between the two, it's worth checking out the Ibanez range.

Tony Visconti is also into using ambient mics: "I'm very much a fan of the room sound, too. I always record it if it's a real heavy rock guitar with power chords and crunches and all. I'll go around the room and clap my hands and I say, 'Put the mics there, that's it.' Quite often, I'll turn the room mic towards the studio window, and you'll get a reflection of the guitar sound — not directly facing it, because you're looking for reflections." Although he states in the same interview that he'll try to use a pair of U87s for ambience if possible, he's also mentioned elsewhere using PZM mics as an alternative.
Love love love this guitar! I ordered it because it reminds me of my Dad's old Kay archtop that I initially learned to play on. The retro jazz style of this guitar is awesome. My musician friends love it and and like the sound of it although they haven't heard it plugged in yet. It took me a very short while to get used to the strings (made by the company for this guitar) and while they have a tinnier sound than what I'm used to for an acoustic guitar, they do deliver when it is plugged in. Overall it really seems to be more of an electric-style guitar. The neck is narrow and the body is small - something that I am so happy with! It is extremely playable. I may switch to bronze strings to get a warmer tone, but for now I want to give these strings a chance to sing. I also ordered a case from the company that fits this guitar, and for the price, it is awesome as well! Very light and the guitar fits perfectly and securely. At a recent gig, a complete stranger came up to me to look at and admire this guitar - it truly is a beautiful instrument. The woodgrain is rich and not as red as the pictures make it look. I feel like Stu Sutcliff - don't really need to know how to play - I can simply stand in the background and look cool ;-)

Personally, I just don’t understand how you can justify calling guitars that go for 2-3x the price an “alternative”. In a list like this, you should be providing alternatives that provide superior quality, sound, and ergonomics for a SIMILAR pricetag, not a jump from $200 to $600. Also, the concept that a beginner musician will have absolutely any clue that these guitars will sound poor is almost laughable to me. A good amp will do a lot of the work, and another portion of your sound goes into technique and playing style. An actual guitar itself is less important than the amp and the player. Think of an amp as a GPU and the player as the CPU cooler: if the GPU runs fine and the CPU cooler can do its job efficiently then your CPU will manage just fine as long as it isn’t so horribly behind as to bottleneck the GPU. Also, tonewoods only affect tone in a very small way that unless you are doing a back to back comparison on a clean channel with a flat response cab is very, very difficult to notice, and once you add any crunch or dirt or even distortion it’s just out of the question altogether. If somebody has never picked up a guitar then they could hardly appreciate a Mexican Strat more than a Squire at all.
An EQ pedal has been designed to allow you to tune certain parameters of your sound such as the bass, middle and treble frequencies. They are predominantly used by more experienced guitarists who want to add or take away specific bands of sound. These are great for guitarists who want to really boost the treble, bring out the bass or just ensure their guitar signal sounds as flat as possible. The MXR M109S Six band EQ Pedal is one of our favourites.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: lyle","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

Here we have a matching quad of late sixties Goodman speakers with green labels 25 Watts each @ 12 ohms Very rare in that EACH driver is fully functional, the cones are nice and stiff, no cone rub or any tears, just a killer set of vintage speakers. These came out of a wem cab and were also stock in laney cabinets(think sabbath tone, wem, Burman and Selmer gear Wem used odd impedances, these read 10.01 ohms on my multimeter so is treat them as 8ohms if they are wired up in a cab series parallel. Postage in the U.K. is £32 and they will be sent out in two separate parcels, you will have to arrange your own courier if your not U.K. based you can also collect in person! Any questions just ask

In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.
The Les Paul Traditional 2019 is one of the latest iterations of this iconic guitar, bringing over the same pleasing aesthetics and rock friendly tone using modern production methods for improved reliability, consistency and expanded tone options. The body features a classic mahogany body with no weight relief, and a AA grade figured maple arched top. The 24.75" scale length mahogany neck is topped by a 22-fret fingerboard that has a nut width of 1.695". Giving this guitar its classic voice are Burstbucker 1 & Burstbucker 2 humbuckers, with Orange Drop capacitors that replicate the ones found inside vintage Les Pauls.
During the late 1930s and through the 1940s—the heyday of big band jazz and swing music—the guitar was an important rhythm section instrument. Some guitarists, such as Freddie Green of Count Basie’s band, developed a guitar-specific style of accompaniment. Few of the big bands, however, featured amplified guitar solos, which were done instead in the small combo context. The most important jazz guitar soloists of this period included the Manouche virtuoso Django Reinhardt, Oscar Moore who was featured with Nat “King” Cole’s trio, and Charlie Christian of Benny Goodman's band and sextet, who was a major influence despite his early death at 25.
Amongst the best guitar brands in India for acoustic guitars, Martin is one that stands out. Martin is one of the best known brands for its steel-string guitars. It is a leading manufacturer of flat top guitars which produce top notch sound quality. However, the company is best known for their signature dreadnought acoustic guitar with X-bracing. It is truly one of the best guitar brands for some of the best quality guitars in the market.
Most electric guitars feature multiple pickups. Some will have two or three single-coils. Some will have two or three humbuckers. Many offer a combination of single-coil and humbucker pickups. This combination offers the player a wide range of tonal options. Pickup configurations are often abbreviated by referring to single-coils with an "S" and humbuckers with an "H." The placement of each pickup is indicated from the neck down towards the bridge. Thus an SSH configuration has single-coils at the neck and middle positions and a humbucker at the bridge.
The solid state amp isn’t really new either, but it only came into its own following William Shockley’s world-changing invention, the transistor. Its use for the audio circuitry allows the amp to be more adaptable and easier to tune, but despite innovations in recent years, the overdrive of solid state amps isn’t yet on par with what a tube can offer, and only a few manufacturers can boast of products that come close to sounding as clean as a tube amp.

You can choose between tube amps, hybrids, or solid state models. The first are generally viewed as the grooviest. The latter are cheaper, more reliable, and require less maintenance. And the hybrids are often a practical compromise. (Keep in mind that watt for watt, tube amps are much louder than their solid state cousins with similar wattage ratings.)

The music industry is one that has really felt the effects of the digitalization of the world over the last few decades. In the 1970s and '80s, recording, composing and production work would have been done manually with a complicated series of hardware mixers, synths, sequencers and other devices. Today, all you have to do is plug into a computer running the music software that's relevant to the task. These programs and tools don't only make it possible for you to work faster; you can also get started sooner, since a large selection of software packages are available to download directly. You won't need to wait for shipping: just download and start working.
Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).
: Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
Non Locking Tremolo TRÉMOLO FAT/SAT INSTALACIÓN DE LA PALANCA DEL TRÉMOLO La palanca del trémolo se puede poner y quitar muy fácilmente. Introduzca la palanca en el orificio de la placa base del trémolo. Tire hacia arriba de la palanca para extraerla. AJUSTE DE LA PALANCA DEL TRÉMOLO (SAT PRO) Para ajustar la altura de la palanca, retire la tapa de los muelles del trémolo en la parte posterior de la guitarra y, con una llave Allen de 3 mm, gire el tornillo de...
Some early Valco instruments continued to make it into the marketing pipeline – early on, at least. Probably as a sign of the increasing difficulty in getting product, the Spring/Summer 1942 Sears catalog sported a full complement of Supro guitars, essentially the ’41 line, all labeled with the newly-chosen Sears brand name, Silvertone. Shown in the ’42 Sears catalog were the Supro Capitan and Supro Rio, now renamed the Silvertone Crest (carved torch logo) and Silvertone Spanish (no logo), respectively. The Capitan had a standard trapeze tailpiece rather than the Dobro variety, with permanent cord coming out of the top of the lower bout!
With Guitar Tricks I get everything I need in one place. The core learning systems for beginners, for blues rock and country, the songs, the genre specific exercises, an active user forum and a series of tools. I specifically like the Jam Station tool. It includes a number of backing tracks in different keys and tempos for most of the genres being taught on the Guitar Tricks platform. With Guitar Tricks I get everything I need in one place.Other useful tools included are a scale finder, a metronome, a chord finder and a fingerboard trainer. Guitar tricks is continually improving. A new interface has just been added that makes it look more modern and very attractive. The core learning system lessons are also updated on an ongoing basis. This allows them to incorporate the latest teaching methods and keep the lessons modern and relevant.
One of the biggest hits of all-time, this song incorporates everything that is 80’s pop and is performed in the key of F# major, in 4/4 time. Lauper originally didn’t want to sing it since the original version was written by Robert Hazard, who wrote it from the perspective of a man. Eventually, the singer released her version of the song and the rest is history. 
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
Even when the bass track(s) are well-recorded, and sound good, you may want to enhance the bass tone for mixdown with your favorite bass-friendly plug-in processors. Besides the obvious EQs and compressors, there are many distortion processors and amp sims out there suitable for bass. Sometimes a simple tube-warming effect is all you need to add a little subtle fatness, like the many plug-ins that simulate slight tube drive or tape saturation. I always liked the Tech 21 SansAmp on bass, and Pro Tools includes a well-modeled plug-in version of that unit. Most of the popular guitar amp modelers also include options that can add some nice grit & girth to clean bass tracks, including Softube’s Bass Amp Room and Logic’s built-in B.A.D.—Bass Amp Designer—which, like most bass amp sims, includes models of classic bass amps like the Ampeg SVT and Fliptop, along with modern bass amp & cabinet emulations. Any of these can add that finishing touch to a good bass part, and there are many freeware options as well, for those on a tight budget.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.
“I like it because it’s light and simple,” Alana said, reflecting on its 5.1-pound weight. “It’s easier to get my hand around the neck on this one,” Charles noted. Both found the Les Paul Express’s rounded top shoulder to be more comfortable than the horn-shaped cutaways on most of the other short-scale models, and they felt the smooth finish on the back of the neck made it easier to play. The adults agreed. “I’m surprised—for a small guitar, it’s fun to play,” Ken Rosser said.
Instead of thinking about the different woods (mahogany, maple, rosewood, etc), all the different pickups, necks, scale lengths, bridges, body types… all you have to worry about is getting the STYLE right. 95% of the time, that will get you the SOUND you want as well. Of course, that being said, get the highest quality wood you can. For example, most players agree that a “solid sitka spruce top” is probably the highest quality wood you can get for a “beginner” level acoustic guitar, without compromising tone.
After years of analogue delay companies decided that it was not clean or accurate enough. So they came up with a much sturdier design with digital delay chips.Not only can these get the timing down perfectly every time but they can also cover a wider range of delay options. Depending on the chip inside you can easily get multiple seconds of delay time in a single pedal.The main downside to these is that they can sound a bit clinical and too clean. Manufacturers have battled this by adding in different modulation options on delays like this to give it more character. If you want a delay for every possible scenario digital might just be the way to go.

There’s no disguising what the Jackson Pro Series DK2 Okoume is meant for: shredding. From the tonewoods to the construction to the feature set, everything on this guitar is designed to bring the best out of lightning-speed solos and other fretboard pyrotechnics. That it clocks in at under $900 off the rack makes the Pro Series DK2 a great value buy.
Remember when I said that there were 2 amps widely used as practice amps and tools for guitar tech’s? Well, the Orange Micro Crush Mini Guitar Amplifier Combo is the other one. Warm ups before gigs, during set ups and maintenance work, this amplifier is relied upon to provide accurate sound and incredible tone anywhere, anytime. This is one of the best cheap amps available thanks to the fact it’s made by one of the most respected amplifier manufacturers in the world, powered via 9V battery and busts out some seriously amazing clean and dirty sounds.
Presuming it is at least theoretically possible to digitally document in computational language every nuance of Eddie Van Halen's performance, the other aspect on the rendering side of the best-most-real equation is the guitar - from the pick or fingers on the strings, to the resonance of the wood body, the dynamics of pickups, the amps, the effects and such other processing gear.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Custom - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Ivory, Sunburst

A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.
The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
The steel-string beauty is crafted from solid Sitka spruce on the top, which features solid Indian rosewood back and sides, and a slim mahogany neck and rosewood fretboard. You’ll notice some impressive decoration on the BR-160 (as we mention in our full review), including an exclusive Dalmatian-style tortoiseshell pickguard, accurate 14:1 butterbean-style tuners, and an elaborately decorated motherof-pearl headstock.
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
The primary means of identifying the model number of Kent guitars is via a label on the back of the headstock. Through the years many of those labels have fallen off or been peeled off. They do not add anything to the appearance of the guitar. The 700 and 800 guitars had a round foil sticker with the model number and sometimes serial number pressed into it, kind of like Dymo tape labels. The look a lot nicer than the white paper one used on earlier models, but they still can fall off over the years, and they are harder to read.
A great debate has raged hot and heavy throughout the guitar playing world since George Beauchamp and Rickenbacker invented the electric guitar. It's a debate that's ignited feuds, torn apart families and has surely broken some hearts and continues to this day. What debate drawn from the innocent depths of guitardom could illicit such a foul and unexpected response?

{ "thumbImageID": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "defaultDisplayName": "Fender PM-TE Standard Travel Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000138832", "price": "699.99", "regularPrice": "699.99", "msrpPrice": "700.01", "priceVisibility": "1", "skuUrl": "/Fender/PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural-1500000138832.gc", "skuImageId": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

I am 60 years old. I want a guitar (acoustic). I have decided on to retrain myself towards finger pickin style. I am researching knowledge and the tonal properties of the wood / tonal qualitites. I have very small (5.1). My hands are small. Neck demensions are very important towards please let me be trained so i can determine neck width and shape for my guitar

In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
Ibanez is one of the first Japanese musical instrument companies to gain a significant foothold in import guitar sales in the United States and Europe, as well as the first brand of guitars to mass-produce the seven-string guitar and eight-string guitar. The company has an impressive lineup of products ranging from instruments to pedals and accessories.
The exact effect of the smaller cap depends on the other components in the circuit, including the guitar cable but for a typical humbucker with the tone control at max treble, volume at max and 470pF of guitar cable you get a 6dB boost peak at 3K rolling off at 12dB thereafter without the small cap.With the small cap, the peak shifts down to 1KHz and you get 10dB boost. This is because the capacitance of the guitar cable forms a resonant circuit with the inductance of the pickup then you add a further cap in parallel which shifts the resonance down in frequency. if you then roll off the volume to about 7 the peak drops to about 9dB of boost and shifts up a little in frequency because the resistance of the volume control decouples the cable capacitance from the pickup inductance.
Read Full Review This electric guitar from Schecter has an awesomely low price for beginners out there with a genre of music in mind is to play rock and lots of heavy metal. The guitar has similarities in design with the Schecter Omen 6 series which is a higher model to the C-1 SGR, but the C-1 SGR also has the humbuckers for its pick-ups controlled by master volume, single tone control and a 3-way toggle to switch between pick-ups to get near on what the higher model can do.
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
Greg's Vintage Guitars Atlanta ,"we sell keepers",The Vintage Guitar News and Views.....vintage guitars for sale ,Atlanta georgia.Vintage guitars ,players guitars cool affordable,rare,vintage and collectible guitar and gear sales,the obscure and under appreciated guitars.Vintage fender guitars,vintage Gibson guitars,Vintage Ibanez guitars,Guild guitars,Valley arts guitars,Gretsch guitars,Taylor guitars,Martin guitars,Takamine guitars,Stratocasters ,Telecasters,guitar cases,and guitar parts. Both vintage electric guitars and vintage acoustic guitars for sale . Vintage Grammer guitars, Martin guitars. Also included are Fender amps,Guild amps,Magnatone amps,tweed,blackface,silverface amps,amp parts and repair..Electric guitars sales,acoustic guitars for sale ,vintage electric guitars ,vintage acoustic guitars,vintage bass guitars ,vintage fender guitars,vintage Gibson guitars,vintage Ibanez guitars,vintage guild guitars,vintage fender amps.vintage amps,fender,fender telecasters,Gibson Les Paul,,vintage guitars for sale ,guitars for trade ,buying guitars, sell guitars, vintage fender stratocaster,fender esquire,fender P- bass, fender jazz bass,  amps,the vintage guitar news and views, vintage guitar trader,vintage guitar parts ,vintage guitar tuning keys,So whether you are in the market to purchase a vintage or collectible guitar,consign a vintage guitar or place a collectible or vintage guitar on layaway contact Greg's Vintage Guitars Atlanta. vintage guitar pickups, vintage and collectible  guitar sales.
Along with the Dobro name, OMI was acquired by the Gibson Guitar Corporation in 1993. They renamed the company Original Acoustic Instruments and moved production to Nashville. Gibson now uses the name Dobro only for models with the inverted-cone design used originally by the Dobro Manufacturing Company. Gibson also manufactures biscuit-style single-resonator guitars, but it sells them under names such as Hound Dog andEpiphone. The Dobro was first introduced to country music by Roy Acuff.

Though Dennis Hartnett took good care of his ViVi-Tone instruments (mandola NMM 10809, mandocello NMM 10810, and this guitar), all three show signs of extensive use. Indentations on the bar-armature and wear to the screw-ends of the posts on the guitar pickup indicate that Hartnett also used the instrument for electric-only amplification, in addition to the electric/acoustic set up in which he left it. Hartnett's guitar is preserved with an amplifier (NMM 10812) by Webster Electric Company of Racine, Wisconsin, and an accompanying foot pedal.

{ "thumbImageID": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard/K35713000002001", "defaultDisplayName": "Gibson Les Paul Faded 2018 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry Black Pickguard", "sku": "sku:site51500000137380", "price": "989.00", "regularPrice": "989.00", "msrpPrice": "1,649.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard-1500000137380.gc", "skuImageId": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard/K35713000002001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Bourbon Black Pickguard", "sku": "sku:site51500000137381", "price": "989.00", "regularPrice": "989.00", "msrpPrice": "1,649.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Faded-2018-Electric-Guitar-Worn-Bourbon-Black-Pickguard-1500000137381.gc", "skuImageId": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Bourbon-Black-Pickguard/K35713000001001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The initial single-pickup production model appeared in 1950, and was called the Esquire. Fewer than fifty guitars were originally produced under that name, and most were replaced under warranty because of early manufacturing problems. In particular, the Esquire necks had notruss rod and many were replaced due to bent necks. Later in 1950, this single-pickup model was discontinued, and a two-pickup model was renamed the Broadcaster. From this point onwards all Fender necks incorporated truss rods. The Gretsch company, itself a manufacturer of hollowbody electric guitars (and now owned by Fender), claimed that “Broadcaster” violated the trademark for its Broadkaster line of drums, and as a newcomer to the industry, Fender decided to bend and changed the name to Telecaster, after the newly popular medium of television. (The guitars manufactured in the interim bore no name, and are now popularly called ‘Nocasters.’) The Esquire was reintroduced as a one-pickup Telecaster, at a lower price.
What about the TAB and lyrics on this site? According to U.S. Copyright laws, there are allowable uses of copyright materials, such as extractions for educational purposes. Any TAB, or lyrics, shown on this site are specifically for teaching, using the reader's knowledge of the tempo and sound of a song to facilitate the written material. In addition, I show only excepts from familiar songs, not the entire song. I also encourage readers to obtain full versions of the sheet music from an MPA recognized site. The only exception to this approach is for songs no longer covered by copyright law (songs now in the Public Domain).
Standard tuning but with the 6th string lowered two whole steps. Used by Alter Bridge on the song "My Champion" (tuned down a half-step) as well as Sevendust on the song "Mountain" (tuned down one and a half steps). Also used by John Mayer on the song “Neon”, and by Chino Moreno of Deftones on some songs such as "Swerve City" and "Hearts/Wires", tuned down a full step.
The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.
Enlarging/ Drilling Holes: Often required to upgrade tuners, or occasionally to change control pots. Enlarging a hole in wood seems simple enough, and it is. But it's also an easy way to ruin the finish of the guitar and worse. The problem is because there is no wood in the center of the hole, the edges pull upwards instead of cutting. It often results in large ammounts of chipout or worse. The answer is to run the drill BACKWARDS. This will ream the hole out without the risk of chipping. If the hole needs to be made significantly larger, it is often best to use a bit one size up from the desired hole size and run it backwards till the drill has gone just below the surface. Now you can drill the desired size hole normally relatively safely. The washers or dress rings will hide the slightly larger starting bevel that remains. Whenever possible, drill half way through from both sides or clamp a "backer board" in place. Do NOT use much pressure on the drill, let it do the work, excess pressure is usually due to dull bits, and almost always results in some king of damage. If you must drill through the finish where there is no hole use the same method as described for significantly increasing the size of a hole, but apply masking tape over where the hole will be drilled prior to starting.
Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
Many guitars (even new guitars) need the frets leveled in order to play buzz-free with low action. Most electric guitars with bolt-on necks come from the factory with high tongue frets. Doing great fret work is a learned art, and I guarantee that you will be happy with mine. All my fret work jobs are performed with the guitar mounted in a neck jig that simulates string tension. This allows very accurate work. Re-fret jobs include leveling the fretboard if needed.
My Carvin SH575 is a semi-hollow body electric. The size is similar to the Gibson 336, but sounds totally different. When you play this guitar you can't put it down, Carvins are made with computer aid wood carving CNC machines the proto-type of the guitar is measured with lasers and programed into the computer so every guitar they make is to the 1000th to the original. The finish and the detail is awesome. It also is wired with hum bucking pick-ups, piezo acoustic pick-up and Roland GK synth guitar. You can get some beautiful hybrid tones from this thing and I never can stop finding new ones. Try one of these out if you ever go to California I think there is like 5 stores around the L. A. / San Diego area, you will see what I mean.
For the hobbyist guitarist this is a great 'bang for the buck' investment. It has practice tools for the beginner but solid tones for the advanced guitarist. For home use, maybe even a garage band it's perfectly adequate. If I were a more serious musician doing gigs with high end audio going to the audience, I'd be investing more than a hundred bucks in my stage rig.
At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.

There was a question from Benhur about Cort. If you lived in England you may know them better. They are an Indonesian company who builds many of the lower price point guitars for the big names like G&L and Fender just to name a. Few. Lower price doesn’t always mean less quality. Cort has a following in their own skin, and many with other well known names just may not know they are playing a Cort.

As has already become apparent, the resonator instruments which made both the National and Dobro names in the late ’20s and ’30s were not the only effort underway to increase the volume of the guitar. The ampliphonics found immediate acceptance among Hawaiian players, notably Sol Hoopii, the very first to record with them when he used a prototype in his first session for Columbia on October 18, 1926. This was used on “Farewell Blues.” But they still didn’t satisfy the desire of orchestra guitarists to get out of the rhythm section. In addition to metal resonator cones, electricity was waiting in the wings, and National, Dobro and National Dobro would play a significant role, both directly and indirectly, in that ultimately triumphant development.
very recently I've been trying to get a band together where the Humbuckers of my les paul would suit the sound a lot more and decided to pull out my les paul, on trying to tune it, I noticed the intonation was a little off on all strings (not particularly noticeable by ear, but plugged into a tuner one could see it was off), but on the high E string it was very much off, from the third fret and higher it is very off sounding.

High-end builders of today have gone back to germanium en masse for their classic fuzz tones, and most of them test their transistors to sort out the few that will do the job correctly. They put them in anything from vintage-style units—like Fulltone’s ’69, Frantone’s The Sweet, and Roger Mayer’s Classic Fuzz—to way-out updates of the breed—such as Z.Vex’s Fuzz Factory.
For me, the hardest part of mixing is getting the vocals to sit properly. There are a lot of tricks you can apply that can help, but I think one of the most useful is to send the vocal to a bus and insert a compressor there, with a high ratio of around 10:1 or more. Set a low threshold, and a medium attack and release, then, in the next slot, load a distortion plug-in with a warmish sound. Use high- and low-pass filters, set to around 100Hz and 5KHz respectively, and mix a small amount back in alongside the lead vocals. You don't need to add much — it should be almost 'subliminal' — but it can really help to fit the vocal in the track. Nicholas Rowland
So, how to use the tone knob? Open it to get a trebley sound, and roll it off to get a warmer, darker tone. Experiment. Some guitars sound best with the tiniest roll back on the tone knob, some songs require a certain combination of tone and pickup settings to sound best. Try to listen to the John Mayer DVD “Where the Light Is” and try to emulate the guitar tones there using only your pickup selector and knob. He uses different guitars and settings, but a lot of those can be emulated just with your guitar’s controls. Experiment.
Once you have the essential elements in place-a great amp, guitar, and guitarist-you almost can't help but get a great guitar tone. Crank the amp up to the appropriate level and begin with some mic comparisons. It's especially telling to audition different types of mics: for example, dynamics, ribbons, and large-diaphragm condensers. (I rarely use small-diaphragm condensers for miking guitar amps; on the other hand, I've found that almost any microphone will strike gold once you find the right spot for it.)
When Bob Dylan described the Band's "wild mercury sound," he was really talking about Robbie Robertson's guitar, as exemplified by his torrid, squawking solo on "Just Like Tom Thumb's Blues" from their 1966 tour. But by the time the Band were making their own LPs, Robertson had pared down his approach, evolving into a consummate ensemble player. "I wanted to go in the opposite direction," said Robertson, "to do things that were so tasteful and discreet and subtle, like Curtis Mayfield and Steve Cropper… where it was all about the song."

Guitar amplifiers vary in wattage. If you're playing to a massive audience, you'll want several 100-watt amps; however, for everyday use, that is overkill. If you merely want it for practice, a 10-watt solid state guitar amplifier will do, and if you're playing to a small venue, you'll probably want to consider a 20-watt valve amp. It's surprising how much sound a little amp will produce.
airline guitar Airline Guitars amp amps bass guitar danelectro eastwood guitar Eastwood Guitars electric guitar electric guitars fender george harrison gibson gibson guitars guitar guitar amp guitar amps guitarists guitar lessons guitar review guitars Guitar Theory guitar tips harmony guitars japanese guitars japanese made guitars jimi hendrix kay guitars les paul lessons mosrite NAMM Updates rare guitar rare guitars silvertone teisco the beatles tips tone tremelo valco vintage amp Vintage Amps vintage guitar Vintage Guitars
Many modern processors have such great presets you'll never need to get delve any further to create your own. However, almost all units with presets allow you to easily create your own favorite presets. You can start with a factory preset, tweak the sounds to your taste, then save it in your own location to be recalled at the touch of a button while you're playing.
A tabletop unit is a type of multi-effects device that sits on a desk and is controlled manually. One such example is the Pod guitar amplifier modeler. Digital effects designed for DJs are often sold in tabletop models, so that the units can be placed alongside a DJ mixer, turntables and CD scratching gear.[17] For a DJ, a pedal located on the floor would not be practical because she/he would find it hard to adjust the knobs.
: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! Hello, The Vox "plank" guitar I had was EXACTLY like yours! I don't have it now (January,2005). I sold it on eBay this last Spring on Ebay to a collector that works at Warner Bros. studio. He bought it for $460.00 !! There were a few bidders, so I would hang on to that 1950 skiffle guitar if I were you. They are very RARE! Peace! Rory
The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more
The Fender Squier Bullet Stratocaster is one of the most popular low budget electric guitars on the market. For what money can buy around this price, it’s good value. The quality of the hardware, tuners and pickups can’t go up against the original Fender Stratocaster, but it still sounds really nice and feels good for playing, practicing and some first gigs. A perfect entry-level guitar that is worth the investment.
Most of the modern electric guitars are provided with several tones and volume controlling circuits which helps in controlling the string vibration and thus the electrical charge produced. These adjustments are mainly done with the help of knobs provided on the neck of the guitar. Thus, the more the number of electrical circuits, the better the guitar can be adjusted for different sounds.
Finally, amidst all the considerations about tops and shapes and tones, don't underestimate the importance of choosing a guitar that you like. Choose one that feels comfortable, whether you are sitting or standing. Make sure you pick a guitar that responds to the way that you play, and don't settle on a "good" guitar if you don't like the way it sounds to your ears.
Also in ’65, W.M.I. produced a Teisco Del Rey catalog that offered some interesting wrinkles in the story. For starters, the guitars shown are the same as in Teisco’s catalog, but the models were all renamed with a one or two-letter prefix followed by a dash and a three-digit number. Solidbodies were designated E- for stoptails, and ET- for those with tremolos/vibratos. Basses were labelled EB-. The numerical suffix signalled the number of pickups in the first digit; the ET-320 had three pickups, the ET-200 had two pickups, etc. Hollowbodies retained the original EP- prefix and either single or double-digit suffix. Amps remained as the Checkmate line.
Conversely, buyers can use these websites to find out what the real value of a guitar is. This can be useful whether you're buying from a private seller or the guitar store down the street. Don't be afraid to haggle if the seller wants more than the guitar is actually worth according to book value. While the seller may eventually find another buyer, there's no reason for you to over pay.
What can we learn from these restaurant guests? The lesson is that we are very easily tricked into liking things we pay more for, even though they might not be that good after all. We get a particular feeling from thinking that we’re treating ourselves to something luxurious. If we, on the other hand, haven’t spent very much, we usually assume that it can’t be a good product.

In 1951, this initial rejection became a design collaboration between the Gibson Guitar Corporation and Les Paul. It was agreed that the new Les Paul guitar was to be an expensive, well-made instrument in Gibson’s tradition.[10] Although recollections differ regarding who contributed what to the Les Paul design, it was far from a market replica of Fender models. Founded in 1902, Gibson began offering electric hollow-body guitars in the 1930s, such as the ES-150; at minimum, these hollow-body electric models provided a set of basic design cues for the new Gibson solid-body, including a more traditionally curved body shape than offered by competitor Fender, and a glued-in (“set-in“) neck, in contrast to Fender’s bolt-on neck

Gibson did not take Fender too seriously at first; Fender were just an amplifier company that made a few guitars. They didn't regard the solid-body Broadcaster launched in 1950 as a serious musical instrument, lacking the depth of tone of a Gibson electric-acoustic. But music was changing, guitarists wanted different sounds, and music was getting louder. Fenders instruments proved to be more appropriate for the emerging musical scenes. Over the next decade Fender created a number of solid-body guitars that defined genres. Guitars like the Stratocaster, Telecaster and Precision and Jazz basses proved to be exceptionally popular and have stayed in production ever since.

In March 2008, Vox unveiled the semi-hollow Vox Virage DC (double cutaway) and SC (single cutaway) at the NAMM show. Notable characteristics include a 3D contoured ergonomic design which not only had an arch top, but also bent back from the neck toward the base of the guitar hugging the player's body. The guitar body was milled from a single block of wood and had a fitted face in combinations of mahogany and ash. A new triple coil pick-up system designed by DiMarzio called the Three-90 emulates a humbucker, P-90, or single-coil tone.
"The Choice of Professional and Student Musicians Everywhere" This eight page catalogue was included as an insert in the 1963 annual "school music" issue of Downbeat magazine (September 1963). As well as keyboards and pedal steels, this catalog contains seven guitars, three basses and ten amplifiers - from student guitars such as the Musicmaster and Duotone to professional models like the new Jaguar.
When using subtle detuning to thicken a sound, I suggest trying values of between five and 10 cents and, where possible, adding both positive and negative shifts, to keep the pitch centre correct. Then combine with the dry sound and adjust the level to control the subjective depth of the effect. This is very effective for fattening up guitar solos or backing vocals.
This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!
There you go! That's the way to go about it. Now keep practicing till you get perfect. I am sure you would get these bass guitar tabs for beginners in few attempts. These were some of the best guitar tabs for beginners. There are some best acoustic guitars for beginners that you can select among the different types of guitars. Buy the best guitar, so that you do not come across any problems later on. You could also purchase some guitar tab software and practice the notations. There are many musical sites that provide you with free guitar tabs and tutorials, that you can refer to. They may also help you get a broader view on how to play guitar tabs. Learning any instrument is fun and helps you overcome fatigue, thus rejuvenating your power and mood. You can definitely trust me on that!
Gibson has produced three Jimmy Page signature models. The first was issued in the mid-1990s. It was based on a stock Les Paul Standard of the time (rather than the more prestigious and historically correct 1958/1959 re-issues issued by the Gibson Custom Shop). The modifications were based on Jimmy Page‘s “#2” 1959 Les Paul, which had been modified with push-pull potentiometers on all four control knobs, as well as mini push-pull switches under the pickguard. This first version of the Jimmy Page Signature did not have the mini-switches under the pickguard, nor did it replicate the custom-shaved neck profile of Jimmy Page’s guitar, but it did include the four push-pull pots. With all four pots pushed down, the guitar operated as normal. Pulling up the volume pot for the Bridge or Neck pickup turned the respective pickup into a single coil, rather than humbucking pickup. Pulling up the tone pot for the Neck pickup changed Bridge & Neck pickups wiring from series (stock) to parallel. Pulling up the tone pot for the Bridge pickup put Bridge & Neck pickups out of phase with each other. The first iteration of the Jimmy Page Signature utilized Gibson’s then-current high-output humbuckers: a 496R in the neck position and a 498T at the bridge.
The GrandMeister Deluxe refines the German firm's best-selling compact head, with four flexible channels and a host of built-in effects. Just about everything is MIDI-powered, so you can edit and store presets to your heart's content. The rear panel includes the latest Red Box recording output, and there's also a new improved iPad app that you can use to edit and store presets, either at the end of a lead or using a wireless MIDI adaptor. The GrandMeister Deluxe 40's four channels sound quite different from those of its predecessor: they're more balanced, with slightly less treble emphasis and a smoother but no less powerful bass response. There's plenty of headroom on the clean channel, which dovetails seamlessly with the higher-gain crunch channel. Both clean and crunch are very tweed-influenced, dominated by a warm midrange that's equally flattering to humbuckers and single coils, especially when boosted and laced with a little of the GrandMeister's digital reverb, which can be combined to taste with delay, chorus, flanger, phaser or tremolo. The two American-voiced lead channels have all the gain you could possibly need for almost any musical genre, from classic rock to modern drop-tuned metal, with a nicely sculpted top-end that squeals and snarls on demand. As a do-it-all tool the GrandMeister 40 takes some beating. All of its many features work efficiently and it's hard to point the finger at shortcomings, because there really aren't any.
The first recording of an electric guitar was by jazz guitarist George Barnes who recorded two songs in Chicago on March 1st, 1938: Sweetheart Land and It's a Low-Down Dirty Shame. Many historians incorrectly attribute the first recording to Eddie Durham, but his recording with the Kansas City Five was not until 15 days later. Durham introduced the instrument to a young Charlie Christian, who made the instrument famous in his brief life and is generally known as the first electric guitarist and a major influence on jazz guitarists for decades thereafter.
I have a really nice classical C-620. Got it for 50 dollars. Like new but now 40 year old wood. I went to a local store to sample what they had and to get the sound and build quality on my Lyle I had to look at name brands upwards of 500 dollars. That's where I stopped and realized I had gotten a great deal. I won't sell mine. Should last a long time. I just got a nice case for it, used, for 50. So. 100 dollars for a great guitar and case. I also got an attachable pickup.
Vacuum tube or "valve" distortion is achieved by "overdriving" the valves in an amplifier.[40] In layperson's terms, overdriving is pushing the tubes beyond their normal rated maximum. Valve amplifiers—particularly those using class-A triodes—tend to produce asymmetric soft clipping that creates both even and odd harmonics. The increase in even harmonics is considered to create "warm"-sounding overdrive effects.[37][41]
If it helps, Schaller have very accurate drawings of all their hardware on their website. You can also get very good drawings of all Gotoh parts as well, but theirs are harder to find (hidden in the parent company's site and I can't recall the full details). It is worth having a look at those, and pay attention to the way the tuning posts are shaped. That radiused section turned into the post is important , it really helps lock the strings firmly.
Any guitar luthier will tell you that the choice of wood is the single MOST IMPORTANT factor that will determine the sound of your guitar. My junk guitar had a body that was made of cheap reconstituted wood shavings instead of actual solid wood. Junk material like that means your sound will also be junk. Any note I played didn’t sustain for more than a single second and it didn’t have that boomy lush sound you normally get from acoustics.
Similarly to the previous model, this guitar has a mahogany body as well as a fine looking maple top. What is more, this unit has an elegant metallic gold finish that you might like. Among the features that make it stand out, we feel like it is important that we mention its practical Alnico Classic humbuckers and the fact that it has a Rosewood fretboard. Additionally, it comes supplied with trapezoid inlays.
{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}
"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD

{ "thumbImageID": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "defaultDisplayName": "Ibanez V70CE Acoustic-Electric Cutaway Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Violin Sunburst", "sku": "sku:site51418660054264", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Ibanez/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst-1418660054264.gc", "skuImageId": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
We’ve decided to give our top choice award to the Martin DRS2 dreadnought acoustic because it’s simply the best all round balance of quality, sound and price, and pretty much anyone reading this should be able to consider it as an option. The only reason you might not is if you’re dead set against a dreadnought body. Otherwise, it’s a fine choice to spend your money on.
“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”
You might recognise this in the tone knob above. The only difference is that R11 is a variable resitance from 0 to 250 Kohm, and C4 is a fixed value. Several guitars have several combinations of R11 and and C4 to achieve different cut-off points. When R11 is 100% position, the resistance is maximised, so there is little incentive for eelctrical current to flow to C4. The signal is not affected as much.
The M5 is extremely portable and pedalboard-friendly, measuring about 6 inches wide and tall. The construction is absolutely first rate with a heavy-duty all-metal chassis and footswitches. Line 6 absolutely does not skimp on build quality with this one. It’s also found on lots of pedalboards of pro players that we’ll talk about shortly, which speaks to it’s durability and quality. In terms of interface, it’s actually quite a simple pedal, as you can see in closeup photos of it. The inputs and outputs are rather simple. ¼” stereo in, ¼” stereo out, an expression pedal input, and an input for a 9V power supply (which comes included with it). On top of the unit you have 2 main footswitches (which not only turn an effect on and off, they are also used to scroll up and down), a small screen in the upper left corner, and 6 knobs to control different parameters of whatever effect you have selected. It does not have USB capability, balanced XLR outputs, or any of the other fancy I/O from larger multi-effects units. But then again, for its purpose it doesn’t really need all that. The M5 is intuitive, nice, and simple.
{ "thumbImageID": "Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst/J47208000001000", "defaultDisplayName": "B.C. Rich Mockingbird Set Neck Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Amber Burst", "sku": "sku:site51500000031711", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "714.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst-1500000031711.gc", "skuImageId": "Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst/J47208000001000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Gloss Natural", "sku": "sku:site51500000031710", "price": "497.54", "regularPrice": "497.54", "msrpPrice": "714.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Mockingbird-Set-Neck-Electric-Guitar-Gloss-Natural-1500000031710.gc", "skuImageId": "Mockingbird-Set-Neck-Electric-Guitar-Gloss-Natural/J47208000002000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Franklin Guitar And Repair was started in this space to sell on Ebay By David Wood and Josh Pewitt! before They knew it...there were enough guitars to open a store! David had been a road musician for nearly 20 years, and along the way he learned to set up instruments and do repairs himself. Franklin Guitar and Repair has grown in many ways, purchased by Pat Stockdale in 2016 and still maintaining quality work, and a mom & pop homey kind of atmosphere.
The first of the easy guitar chords for beginners is E minor, followed by E major. Next you learn A minor and C major, all in the open position, which means the chords contain open strings and are played at the nut position. The next chord is D major, followed by A major. You will learn the B major chord, which is a barre chord with the root note on the A string. After this you learn the B7 open chord, which sounds really nice.
When you first start out playing electric guitar, it goes without saying that it all begins with a guitar and an amplifier. Those are the two most basic parts of your setup, and they’re all you need for learning the fundamentals. Once you have a grasp of your foundation, though, you’re probably wondering how professional guitarists manage to get so many different sounds out of their instruments. Effects pedals are the answer to that question.

Now lets talk amps. I have always felt like you could hand me a great guitar played through a bad amp and I would get a bad tone. However, I can make a bad guitar sound decent through a good amp. The amp, in my opinion is the most crucial part of your tone. I always prefer tube amps that deliver a much warmer, natural sound then the solid state counterparts. However if you are play jazz or something that requires a clean crisp sound, a solid state amp good be great. All the great rock legends used tube amps such as Marshall Plexi’s, Vox AC30, Hi Watt, Fender Twins, Fender Bassmans etc. Now days they make all kinds of boutique amps that are modeled after these classic amps. Matchless is my amp of choice which is loosely modeled after the Vox AC30.

In the early 1960s the Brothers Grim became the first American group use Vox Amplifiers. Joe Benaron, CEO of Warwick Electronics Inc. / Thomas Organ Company, the United States distributor of Vox, along with Bernard Stockly (London), importer of Challenge pianos to the United States, arranged for the boys to have full use of the tall Super AC 100 Vox amps (4×12" speakers). The solid-state version of this amp (known in the USA as the "Super Beatle") was produced to cash in on the Beatles-Vox affiliation, but was not nearly as successful as the valve AC30 and AC15 models.
However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.
Description: Body: Mahogany - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Binding: Cream - Frets: 22, Medium - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tone Pros - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Grover Tuners - Pickups: Duncan Designed - String Instrument Finish: Vintage White, Vintage Gold Top, Black
SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.
Guitar amps for newbies aren’t going to sound as good as the professional rigs used by advanced guitarists, but surely you don’t expect that for under $100. However, they should still sound good. In fact, in my opinion a starter amp should be good enough that, once you’ve moved to a better main amplifier, you can still use your first amp for practice.
With this bundle, you get a hardshell case to securely transport your music instrument, an extra set of strings, and a digital clip-on chromatic tuner to maintain your guitar in tune at all times. Also included are some extra guitar picks, a polishing cloth, and an Austin Bazaar instructional DVD that can teach you all the essential techniques you need.
One special effect I used quite a lot in analogue studios, but which is surprisingly tricky to implement in a lot of software sequencers, is where you feed the left and right outputs of an auto-pan effect to two different effects processors. With this setup, the outputs of the two effects can then be mixed together to create a variety of different modulation-style treatments. This patch always worked well in a send-return loop with a pair of phasers, especially if you also EQ'd the two returns wildly differently. The same setup used as an insert could do great things with distortion and ring-modulation processors, and if you were feeling really adventurous, you could fiddle with the panning rate in real time while mixing down. Mike Senior

Also included was the GP, an equal double-cutaway model with a mahogany body, flamed maple carved top, glued-in neck, fine-tune bridge and stop tailpiece. The only models I’ve seen, which were also advertised, had twin humbuckers and conventional electronics. One source refers to a GP-1, which by nomenclature would suggest a single humbucker, but it’s not known if this ever actually existed. Also, it’s not clear if the GPs came in parts or fully assembled.
   These prices reflect the opinion/perception of the editor of while these are prices one could expect from a quality repair shop, repair rates can vary. A full time repairman can have as much training time and investment in tools as any mechanic. Shop overhead costs are on par with those of any other profession, so if you take your instrument to a professional shop, expect to pay professional rates. And expect professional work. While this list reflects prices one would expect to pay at a professional shop, rates will vary. Expect to pay by the hour for some extensive restoration jobs. Rates based on an hourly charge of $60.00 p/hour. Shop minimum labor charge - $60.00 Prices updated January 2014
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as bass guitar, electric piano, and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort. While overdriven tube amps are still used to obtain overdrive in the 2010s, especially in genres like blues and rockabilly, a number of other ways to produce distortion have been developed since the 1960s, such as distortion effect pedals. The growling tone of distorted electric guitar is a key part of many genres, including blues and many rock music genres, notably hard rock, punk rock, hardcore punk, acid rock, and heavy metal music.

{ "thumbImageID": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "defaultDisplayName": "Schecter Guitar Research Hellraiser C-1 with Floyd Rose Sustaniac Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51361806818304", "price": "1,099.00", "regularPrice": "1,099.00", "msrpPrice": "1,549.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry-1361806818304.gc", "skuImageId": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Similar to the previous model we mentioned, Squier by Fender Bullet Strat represents the Stratocaster beginner family. It’s a guitar full of tradeoffs, but you are rarely going to find a model more capable in this price range. I’ve played a lot of these, and even have one which I use strictly for practicing at home. I like it, even though it’s somewhat limited.

A bass amplifier or "bass amp" is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. While bass amps share many features with the guitar amplifiers used for electric guitar, such as providing an amplifier with tone and volume controls and a carrying handle, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15" speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst

Looking for Used Gear? You may have just discovered your future. Music Go Round franchisees started out as customers of our stores. They have a love of music, they love gear and they understand the industry. Most importantly they’ve taken their passion and turned it into a business they’re proud of which is an asset to the music scene in their community. Who wouldn’t want to own a business where every day they were doing what they truly love? Sound interesting?
The acoustic solos Reinhardt recorded with the Quintet of the Hot Club of France between 1936 and 1940 are simply astounding displays of virtuosity, melodic taste and speed that left indelible impressions on players throughout several generations, including Les Paul, Jimmy Page and Michael Angelo Batio. Django didn’t even need all four fretting fingers either, using only two left hand fingers to play complicated chords and hyperspeed solos (his third and fourth fingers were badly burned in a fire).

The headstock is located on the end of the neck opposite the guitar body. It is fitted with tuning keys, also known as tuners, tuning pegs, or machine heads. These adjust the tension of each string, changing their pitches. The nut is a small strip located where the headstock meets the neck, that is grooved to guide the strings onto the fretboard. On an acoustic guitar, the nut is commonly made of plastic, but it can also be bone, graphite, or any number of other materials.
The Dobros and Nationals were joined by the first Supro guitar versions in late 1935, even though their announcement didn’t appear until a few months later in the March, 1936, The Music Trades. These first Supro guitars included an aluminum Hawaiian lap steel, both electric Spanish archtop 6-string and tenor guitars, and an electric mandolin. They mark the official beginning of the Supro story.
Usually, electric guitars have six metallic strings – although there are certain variants used in specific musical styles with seven or even a dozen strings (six pairs). This kind of guitar is used in all kinds of musical styles, from jazz, to metal, pop... and of course Rock'n'Roll music. Actually, the origins of the electric guitar can be traced back to the 1930s Swing-era Jazz movement, when guitarists started experimenting with steel pickups adapted to their hollow-bodied instruments, as a way to get a louder, more substantial sound than what would be possible from a regular guitar. The first commercial electric guitars came up in the mid 1940s, and by then a solid-body was already in use – thus introducing the much familiar look that's now typically associated with electric guitars.

Here we JUST SOLD OUT: another excellent FG160 for your serious consideration the Yamaha FG 160 Acoustic Guitar Made in the early - mid 70's from Taiwan factory. This example was built well over 35 years ago and was built to very high detailed standards as well as some of the best grained Mahogany woods seen in this time period ( see pics for those detail ) in that time period these were meant to compete with the great M@r#!n and now this Yamaha is quite well aged too and is a REAL vintage guitar in its own right sounding SWEET with its well aged woods with really beautiful patina of a true vintage instrument. This one has the Amber/Tan label and not the Red Label but the golden label. The frets are very good - original I did a quick dressing of the lower 5 or so frets and polished all. The guitar has it's natural age and character with beautiful patina and it has been played of course its not new its over 35 years old with a few insignificant minor nicks,dings from a well loved and adult respected instrument. This fine example is here and in stock... We upon receiving have remove the strings cleaned and detailed the guitar oil rosewood and polish finish, We have * upgraged* its TONE by installing a Martin BONE nut and compensated BONE saddle set for improved tone resonance over the old plastic stuff so she has a nice deep ring to its tone now and this guitar to plays very well Yamaha's and they are truly amazing instruments very well compared to a much more expensive brand guitar as you may have heard…. These FG’s are known for there fine construction and playability with amazing tone for this kind of money… to get a vintage aged tone woods instrument built this well and in this kind of condition make this FG160 the one to own for a song! Re: condition its over 35 years old and is BETTER than average This guitar has no cracks, no finish checking no warped top, no loose or pulling bridge Its neck has a real nice feel to it and is a medium - slim profile = feels like M@r#!n D-28ish substantial but not too fat - Just right! 1-11/16ths at the BONE NUT Play action is very good see pics Its a standard Dreadnought Acoustic and is Identical to the Yamaha FG180 This is an excellent vintage Yamaha FG160 You will be pleased with its sound she has good bones its over 35 years old and has proudly stood the test of time there is no reason this guitar will not continue to serve another 35+ years with average care. Beautiful Patina only seen on real vintage guitars Let me know if you have any questions ore are ready to purchase email Joe at

Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.

Hand built with the same precision as our larger guitars, just 25% smaller.  Great for travel, ideal for children struggling to get their arms around full size guitars, fantastic second guitar for the office.  Because it has a smaller box design our Travel will have a smaller sound (like any smaller guitar) but our Travel Electric with built in auto tuner allows you to plug into any amplifier or PA system giving you the same power as our full size guitars.
We spent 39 hours on research, videography, and editing, to review the top selections for this wiki. Although none of them go up to 11, we are pretty confident that one of the guitar amps on our list will deliver the perfect level of sound and quality of tone for whatever venue or style you need to play. We've ranked them here by their tonal expressiveness and flexibility, durability, control options, and ease of use. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best guitar amp on Amazon.
When you buy an acoustic guitar that you’re drawn to because of its aesthetics, you will become more motivated to play it. This is especially important for beginners who may find it tedious to do the same exercises over and over again, or who may be tempted to skip practice sessions. A good-looking guitar is something you will love playing again and again.
Tuning Instabily: Problems with tuning stability are almost always cuased by improper tuning technique (always tune UP to the note) or a binding nut. (There are RARE occasions where the string isn't seating correctly at the bridge, and we're not considering problems with set up regarding a tremolo) Even the cheapest geared tuners don't "slip" as a rule. If a geared tuner is failing it will make a "poping" type of sound as the gear jumps teeth. If the gears are loose, it is possible to pull a string flat with extensive (excessive?) use of a tremolo. If notes are going sharp it is due to the nut binding. What happens is excessive tension builds up between the tuner and the nut in order to overcome the binding. Then as you play the vibration of the string allows it to wiggle through the slot equalizing the tension, and making the string sharp. See above for info on a binding nut. If a fretted note is sharp it is an indication that the nut slots are not deep enough (or excessive presure with high frets/ scalloped or worn fretboard). If a string is going flat, it is always bridge related. Either a problem with the string seating fully (common w/ trapeeze tailpieces and ball ends in vintage tremolos (the reason they came up w/ bullet ends)) or binding on a rough saddle/ the edge of the trem block. Again, it is possible to cause a tuner to back off with extream tremolo, but rare.

To set up guitar pedals, use a short patch cable to connect your guitar directly into the tuner pedal if you’re using one. If you’re using filter effects pedals, like auto-wahs and envelope filters, connect them next. Plug in your compressor pedal after the filter pedals, followed by pitch-shifting, overdrive, and distortion pedals. Set up your modulation pedals, like chorus, flanger, tremolo, or phaser pedals, near the end of the chain so they’ll have a richer sound.

Fender is an American company founded by Clarence Leonidas Fender in the year 1946. The company headquarter is located in Scottsdale, Arizona, United States. The company provides a wide range of guitars to customers at an attractive price range. The company is best manufacturer of amplifiers and stringed instruments and has become the leading guitar brand in India too. - Musical-instruments-Online

The relationship between perceived volume (loudness) and power output in watts of an amplifier is not immediately obvious. While beginners sometimes assume that there is a linear relationship between perceived volume and wattage (e.g., beginners may think that a 50-watt amp will be much louder, or about ten times louder than a 5-watt amp), in fact the human ear perceives a 50-watt amplifier as only twice as loud as a 5-watt amplifier (which is a tenfold increase in power in watts). Doubling the power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural audio compressor at high volumes.

The first Touch Guitar Invention started in 1959 with the filing of patent #2,989,884 issued in 1961 as the first touch tapping instrument which could be played on two separated necks Simultaneously by muting the strings at the distal end of the neck along with numerous other claims. Until 1974 it was known as the DuoLectar and with a new patent "the "Electronic Mute" has been known as the "Touch Guitar. It is held in the normal way over the shoulder and design with the left hand playing the lower bass neck in a traditional way and the right hand playing over the top on a neck which has a wider string spacing allowing the hand to be used in both vertical and horizontal angels to the strings. It is absolutely off at all times, until Touched or picked.

I have many Behringer pedals.Used them gigging.Have had many people ( lots of musicians ) asking me what I am using to get my tone and effects .They are all surprised when I tell them Behringer pedals.And almost all say the same thing."aren't they made of plastic"? Yes they are made of plastic.But being someone who has worked in the plastics industr.for 25 + years I know Plastic can be very strong .I have done hundreds of gigs with these pedals and never had a problem.You would really have to jump ontop of these hard to damage them.And if you did that with the non plastic pedals I am sure you would also have a problem .That said.I have 5 fx600 pedals because I found a site selling them for $14.A super bargin for so much effect.As far as battery power nowadays batteries cost more than pedals so anyone ... full review
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.

While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.

"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
This is called a ‘Rectifier’ or diode. Grid: A fine helix (spiral) wire called ‘Grid’ is placed between the Cathode and Anode. A small variable voltage (music signal) on the Grid varies the large current between the Anode and Cathode. The small varying input signal is now amplified to a large varying current. The result is very linear. Why this happens is a mystery. The fact that it works and the universe exists is a miracle. It pays to be humble. Transistors: (emitter base collector) are complementary to valves (cathode grid anode).

From Clean to Modern, chose from 8 amp settings, four modulation effects and four delay/reverb effects, with tap tempo. Its Hi-Fi sound can be sculpted by a three-band EQ, giving it a lovely spacious sound distribution; and special off-stage circuit gives it excellent overdrive qualities even at low, discreet volumes. Finally, its sleek designer looks will fit into any living space, especially with its soft tube glow.

The Professionals, just like the Standards before them, are designed to appeal to a wide range of players with a wide range of styles. These are not for vintage obsessives. Most of the changes are relatively subtle: a new 'modern deep C' neck shape; new narrow/tall frets; and the Teles revert back to three (compensated) brass saddles over the previous six Strat-style saddles. Both single coils here use Alnico 5 rods on the bass side and Alnico 2 on the trebles and we have a treble bleed RC network on the volume. A basic trio of sounds shouts 'contemporary Tele' from the biting harmonically rich honk of the flat- pole bridge, through the wider, less quacky pickup mix, to the less hard-hitting but not soft neck voice. It's like someone has EQ'd the sound to balance and maximise its Tele-ness. There's a very lively ringing resonance, too: all the planets seem to align, the maple neck/alder body perhaps pulling down a little edgy spike, while those brass saddles - not to mention the through-body stringing and the more classically voiced pickups - combine to create what seems like a modern Tele in spec but one that has plenty of classic, vintage reference.The colour/wood choices are wide and the subtle improvements to the build - on an already very well proven chassis - make a noticeable change, not least the new neck shape and the taller fretwire. Yes, we've played thicker, beefier-sounding Teles, and thinner, brighter ones, too, but as a foundation tone, which also includes a very smart and practical, lightweight moulded case, it all becomes a bit of a no-brainer.
Perhaps our favorite feature is a far more subtle aspect of this pedal's interior, which is a circuit design that runs your dry signal through an analog path, before reuniting it with the wet reverb signal, which is produced by a digital processor. This means your guitar's signal coming into the pedal is unimpaired by the digital components, giving you a far more pure and organic-sounding output. 

Mr. Bojangles,Nitty Gritty Dirt Band, Leaving on a Jet Plane, John Denver, City of New Orleans,Steve Goodman, Alice’s Restaurant & Motorcycle song, Arlo Guthrie, Bobby McGee, Janis Joplin, Taxi, Harry Chapin, Please Come To Boston, Dave Loggins, Lady, Little River Band, Sailing, Christopher Cross, Lookin’ Out My Back Door, Credence Clear Water Revival.
He or she might even graduate to an acoustic guitar with steel strings long before ever obtaining an amplifier for the acoustics in question, let alone an electric guitar to plug into it. And who are the heroes of the guitar? For the last 50 years it's been Jimi Hendrix, Eric Clapton, Jimmy Page, and Tom Morello, to name just a few innovative names. All of these players made their reputations on electric guitars pumping through amplifiers, and at least one of them–or one like them–is likely the reason you picked up a guitar in the first place.
The Fender Hot Rod Deluxe or its big brother the Deville come to mind. I have a hot Rod Deluxe tube mode 40 watts and it really pumps out the volume. The simple foot switch allows four settings from clean, mean, beyond mean and in your face. It really makes slide guitar sound like a male cat calling to a female in heat. Also, it can be mellow. I have seen many youtube videos with Eric Clapton playing a Tweed Model. I also own a Line 6 Duo Verb, Line 6 DT50, and of course and old US Made Peavey 5150 Eddie Van Halen Signature Model. The Peavey really pumps up the heat and the sustain is as wide as the Grand Canyon.

Tube technology is very much alive in today's digital age, thanks to guitarists who just could not let go of the sound of the past. Even with amp modeling inching closer and closer, there's just no replacing the warmth and organic response of tube amps, especially when recording. Still, there are practical drawbacks with this old technology, mostly due to its fragile nature and extra parts. Because of this, tube amps tend to be heavier and more fragile. Solid-state amps on the other hand have less parts to worry about, and are normally more sturdy and reliable. They are also usually paired with either digital or analog based amp modeling, which allows for a wider selection of tones, albeit without the x-factor that tube adds to amps. Because of this, there are some manufacturers who combine both tube and solidstate circuitry in one amp, but at the end of the day, these hybrid amps will require the same handling care and maintenance as a regular tube amp.
Presuming it is at least theoretically possible to digitally document in computational language every nuance of Eddie Van Halen's performance, the other aspect on the rendering side of the best-most-real equation is the guitar - from the pick or fingers on the strings, to the resonance of the wood body, the dynamics of pickups, the amps, the effects and such other processing gear.

{ "thumbImageID": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "defaultDisplayName": "Lakland Skyline Deluxe 55-02 5-String Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Maple Fretboard", "sku": "sku:site51274115060918", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard-1274115060918.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "brandName": "Lakland", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry Sunburst Maple Fretboard", "sku": "sku:site51274115060902", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard-1274115060902.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst Rosewood Fretboard", "sku": "sku:site51274115060911", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard-1274115060911.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Many compressor pedals are often also marketed as "sustainer pedals". As a note is sustained, it loses energy and volume due to diminishing vibration in the string. The compressor pedal boosts its electrical signal to the specified dynamic range, slightly prolonging the duration of the note.[92] This, combined with heavy distortion and the close proximity of the guitar and the speaker cabinet, can lead to infinite sustain at higher volumes.
So leaving aside the complexities of exactly emulating acoustic instruments with speaker technology -- which we have all come to accept although no speaker can sound quite as sweet as (or at least not exactly like) the acoustical nuance of a fine wooden stringed instrument, we reach the vast majority of modern music - amplified sounds. Again, stringed instruments are among the most difficult to emulate, if not the most difficult to emulate technologically, because of the vast and infinitely variable set performance possibilities which in turn produce a vast and infinitely variable set of physical reactions. Even if MIDI notation can document the coordinated left-hand/right-hand performance of various pitches, velocities, durations and legato, our VST is strained to faithfully reproduce every possible physical result of every possible combination of performed licks.
I would like to start off the list of the best small guitar amps by talking about one of the best small guitar amps out there, which unfortunately dedicated the entirety of its existence to being used for the purposes of laying acoustic guitars. Unfortunately, because I would love to have one of these to work with my electric guitars. On the other hand, the fact that the amp works with acoustic guitars best, means that those of you looking for a mini amp for your acoustic guitar are in luck. The amp does a great job of amplifying the sound of an acoustic guitar, keeping it clean and clear of any kind of electric distortion, so that if there was no increase in volume, nobody would understand the point of the pick up. While small, the pick up is still on the larger side as compared to the rest on the list. The design is vintage and cool, so that the guitar is enjoyable to look at for everyone.
What about Esteban?….lol. There’s no way to make a top ten list, as there are so many extremely talented players. Glenn Campbell is an outstanding guitar player. Lee Roy Parnell is second only to Duane Allman as far as that style of slide playing. Although Willie Nelson doesn’t shred, he is an incredible talent. Duke Robillard, Danny Gatton, Robbie Robertson, Steven Stills, Alvin Lee, Tony Rice, Bryon Sutton, Brian Setzer… there are so many wonderful incredibly talented musicains….thank God! It would suck if everyone played the same. Variety is the key…learn to truly love the art of music. Just like blonds, brunettes and redheads they are all wonderful! If you even try to list the top ten of anything, you are only shortchanging yourself.

You have to have wood to get wood, and it’s unfortunate that a noticeable depletion on this natural resource is affecting the guitar industry even though guitar-making isn’t the primary reason for this depletion. When you talk about tonewoods, you have to mention sustainability in order to protect the natural resource and ensure a future of musical instruments.
Rule 2 - This order is defined by nature and physics. Consider this scenario. You scream and your lungs, mouth shape, and vocal chords define the frequencies that come out. You cup your hands around your mouth to shape the waveform and affect the stereo width. Then your voice goes out into the air and into the Grand Canyon where it bounces around and comes back at you with reverb and delay. If you don't at least follow this fundamental order, you'll be too far out of touch with your listeners and you won't be able to sound acceptable within the mix of a song.
We are recording between June and July our new album entitled "Brutal Agression" which should be out in October/November, also we were recently invited to Rock al Parque in Bogota, which is one of the biggest festivals in Latin America, joining Cannibal Corpse, Havok, Symphony X, Internal Suffering and many more. After that we will play at other festivals such as Mamut Fest y more to be confirmed, then we will concentrate on album release and touring, which will be accompanied by one or more videos.
So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:
On September 6, 2018, the company announced that a global settlement has been reached with respect to the company’s reorganization plan upon emergence from Chapter 11. Under the plan, the company will be focused on its core musical instruments business with "essentially no debt." Current Chairman and CEO Henry Juszkiewicz will step down as CEO and assume the role of consultant. With immediate effect, Brian J. Fox, the company’s CRO, will oversee daily operations until a new CEO is appointed.[59]
To wire three two-conductor pickups we only need one pole. Common goes to volume pot input and 3 switched terminals are connected to pickup outputs. That way, we will select one pickup in positions 1-3-5 and two pickups wired in parallel in positions 2-4. When middle pickup has reverse polarity, noise will cancel out in positions 2-4 and they will be wired in so called “humbucking” mode.
Sure, your pickups pick up the sound, and your amp amplifies it, but even before they get to handle it, your precious tone has already been formed by the interaction of string and wood. Pluck a string, and you set into motion a transference of vibrational energy from the strings into the wood of the body and neck (via different coupling elements such as bridge saddles, nut, and frets). The spectrum of sounds kicked out by this acoustic interaction is the biggest determining factor at the heart of the sound that eventually reaches the listener’s ear, however you delay, spin, or distort it along the way. Let’s look at the characteristic voices of a few tone woods, and see how they contribute to our guitar’s sound.

Epiphone is one of the oldest and one of the best American guitar companies. It was formed in 1873 and later acquired by Gibson Guitar Corporation, another leading guitar brand. Epiphone has something for every player in every genre. The company offers a wide range of Acoustic and Electric guitar models. The nylon-string Les Paul Ukulele acoustic guitar is of famous vintage and has been the industry leader over the years. It is a superb instrument for the money featuring a mahogany body and neck with rosewood fingerboard having dots inlays. Epiphone guitars have a great demand in the Indian market, which has set standards for the budget-conscious versions of guitars.
This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.

Most reverb pedals fall into the ambient effect category, similar to delay and echo in the way it manipulates your signal. It's likened to the delay effect because it's technically a timing effect which, in the world of signal processing, can be described as "sound after sound." In other words, the original sound is produced and another sound follows.
Because of this, the VI opens the door for critique at the smallest degree, but I couldn’t even get that far before finding problems. The strumming is so terribly robotic out of the box, and the sounds divided among the four guitars (Fender Stratocaster and Telecaster, and “bright” and “normal” versions of a Duesenberg StarPlayer) aren’t screaming authenticism either.  
Today's modern rock guitar sounds tend to be "drier" (less room ambiance and reverb), and most often use the close mic technique. There's really nothing to it. Simply use the close mic, run it through the compressor, set the compressor at a 3:1 ratio and adjust the threshold so that the compressor is usually working, but not squashing the signal too much. You will be able to make most of the tone adjustments you need at the amp or guitar, and chances are you won't need to tweak the console' s equalizer at all.

While close-miking can indeed be punchy and muscular, you’ll often find it doesn’t capture the full breadth of your electric guitar tone – that is, it simply doesn’t sound the way your amp sounds in the room. That’s because when you stand somewhere near the middle of any room and play an amp that’s placed a few feet away, several other elements affect the sonic picture. The distance between your ears and the speaker (the “air”), the shape and size of the room, materials used to make the walls, ceiling and floor and/or their coverings, the ways in which sound reflects from them, along with other factors all contribute to how your amp really sounds in the acoustic environment. Most engineers find, therefore, that they need to use some form of distant miking when the aim is capturing a realistic amp tone.
The Whammy – If you’re familiar with the tremolo arm, or “Whammy bar,” then you already have an idea of what this pedal can do. Usually, the Whammy pedal is a rocker type, much like the wah, which shifts the pitch up and down as you rock it back and forth. Eddie Van Halen, Jimi Hendrix and Joe Satriani are a few of the artists you can listen to for a general feel of this pedal’s potential.

Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.

Yet, there’s still a lot to like about the JS140. First, the use of solid basswood for the body of the guitar is a plus, despite the fact that basswood is plentiful and affordable. While it’s typically used in economy guitars (like this one) its tone is quite good, providing a thick low end with a punchy mid range. As tonewoods go, it’s a decent compromise.
After the introduction of electronic transistors in the 60s, engineers began to emulate these new and raw vacuum tube sounds with the new technology. They often used germanium transistors, which were not only cheap, but also had a sensitivity for generating bizarre fuzz tones, a quality that became a key ground for experimentation. The first mass-produced box was the Gibson Maestro FZ-1A Fuzz-Tone, which launched in 1962, right at the birth of British rock: The Fuzz-Tone was responsible for Keith Richard’s sound in 1965’s “(I Can’t Get No) Satisfaction,” transforming it from a mild Dylan-esque acoustic record into the Stone’s signature confrontational delivery.
"It seems a waste to me to work and work for years," Rory Gallagher told Rolling Stone in 1972, "and just turn into some sort of personality." Instead, the Irish guitarist, then only 23, became legendary for his nonstop-touring ethic and fiery craft. Playing a weathered Strat, often wearing a flannel shirt, Gallagher electrified Chicago and Delta styles with scalding slide work and hard-boiled songwriting. His fans included the Edge and Bob Dylan, who was initially turned away backstage at a 1978 show because Gallagher didn't recognize him.
Now, for most players, deciding what should go where on a signal chain simply came through trial and error along with a good dose of common knowledge. And while a player’s signal chain should be his or her own, those of you out there new to creating a solid signal chain can benefit from some of the general 'rule of thumb' type of advice that can get you started in the right direction.

Compared to, say, an Epiphone Dot, the Coupe offers a ‘woodier,’ more acoustic timbre. “Sparkly,” “bell-like” and “jangly” are descriptors often associated with the guitar and its stock pair of P-90s, and cranking the gain up elicits more a sizzle than roar. Be careful with the distortion, though—without a center block like those you’ll find on semi-hollows, the Coupe is still fairly susceptible to feedback.

I am new to guitar but had played Baritone in grades school thru high school in a small school with a band teacher who went on to Iowa State. So I wasn’t finding where notes were and started watching guitar/music theory and found several who headed me to learn my Pentatonic E minor scale before I have finished with chords. I wanted to know where notes are on fretboard.
The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.

The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.

A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.

Curiously, Les Paul also contributed to recording... along with building his own recording studio at his home, he built his own disc cutting system, and did multitrack recording on acetate discs... recording on a disc, then overdubbing himself and that original disc playing onto another disc, and so on. He later worked with Ampex on multitrack tape machines, and released the first multitrack electric guitar recording on Capitol records in 1949... however, Sydney Bechet had released a multi-track recording using Paul's techniques back in 1941. 
I personally don't like the shape of the just looks odd to me. Try a few Epi's...some are pretty nice. Stay away from the G310s...I suspect they may be made of balsa wood..and the Specials. But the G400s, the customs and the Tony Iommis, all of which I have played, have been pretty decent in terms of fit, finish and sound. I'd really love to play a Prophecy at some point...they look pretty rad.
Yamaha is one of those names that you don’t often see outside the realm of keyboards and digital pianos. While their footholds in fairly limited on the stringed instruments market, their quality is well known. Yamaha builds some of the most balanced and best performing electric guitars in their respective categories. That is simple the truth. Now, they might not be as popular as other brands, but that is a whole different story.
For a long time Yamaha were regarded as one of the best producers of student guitars but their reputation didn't go far beyond that. And it's true that they make excellent guitars for beginners, I am one of the many who originally learned to play on their student nylon string C40. BTW I'm one of those guitarists who thoroughly recommend initially learning to play on a nylon string guitar.
Compressor effects help you control the volume variations of your guitar. The compressor basically makes the loud parts softer and the quiet parts louder. This can help you fatten up the sound of your guitar as the overall sound will have much more sustain and often the low-end becomes more pronounced. Some compressor pedals are also sold as sustain pedals, which certainly does give a clearer idea of one of the ways the effect can be used.  
That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.
Color styles – Is this important to you? We know it is for us to an extent, especially if you’ll be performing live regardless of venue size. Even if you’re going to your band-mates place to rehearse, the look of our guitar represents us and our own style. Luckily many of these have awesome options when it comes to makes, colors and designs. Although it wouldn’t necessarily steer us completely in a particular electric guitars direction since sound and feel are still most important.
Their 200-series is reasonably priced, and a great value for a Taylor guitar. They also make the Baby and Big Baby, and the GS Mini—smaller-bodied guitars perfect for intermediate players and beginners with a few extra bucks in their pockets.These are awesome acoustic guitars with a big sound. They might be small, but veteran guitar players love them for the tone and portability.
Without the rhythmic pummel of the Slits, there would be no riot grrl, no Rapture, no Yeah Yeah Yeahs; and without Viv Albertine — who played guitar for this groundbreaking U.K. punk band, and wrote the bulk of their early material — there would be no Slits. Albertine’s unrepentantly unpolished guitar stylings eschewed the high velocities and power-chord assaults of her male contemporaries in favor of trebly, dissonant stabs. It all meshed perfectly with the band’s cheeky, confrontational songs, ultimately turning jagged rhythms into something as provocative and primal as anything punk produced.

Although Orbison’s good friend and Sun Records labelmate Johnny Cash may be known as “the Man in Black,” Orbison habitually dressed from head to toe in black in the early Sixties, a decade before Cash adopted his dark uniform. Even Orbison’s raven hair and impenetrable jet Ray-Bans were blacker than the cover to Spinal Tap’s Smell the Glove, adding to his alluring persona as a mysterious, brooding artiste.