While Taylor Guitars is most famous for our acoustic guitars, we are also proud of our line of unique electric guitars. We have the T5, our original hollowbody hybrid that bridges both worlds like no other guitar. Check out our T5z, the smaller hybrid with a compact body that electric players will love. And be sure to try the T3, our inspired take on the semi-hollowbody guitar with a sound that comes alive with amazing pickup flavors, plus coil-splitting and tone-shaping versatility.
This is where you want to go! Steve is kind, professional, and supremely competent. just brought my Taylor 614ce for a neck adjustment and electronics work. Steve told me that he was running with about a two to three week turnaround period but then did a couple of quick fixes -on the spot- that made my guitar really sing for my next gig. I'll bring it back to him for some more in- depth repair soon but for now I am a very happy camper. And he didn't even charge me a dime!! I will be visiting Steve for all my guitar and mandolin service needs in the future.

The body and neck are also slimmer than other Spanish guitar models, as well, so if you’re used to a steel-string, but gearing up to try a classical guitar, the Kremona Sofia is one to put on your list to try. The strings are Royal Classic Sonata strings, made in Spain, so add this to the guitar body’s manufacturing origins, and you will have a sound that is worthy of a professional, but affordable for just about everyone.
I agree with Squank, and I appreciate the compliment! We live in a golden age of guitar gear and I’m in the lucky position of getting to play through quite a bit of it. It’s rare that I come across an amp, pedal, or other piece of guitar hardware I truly dislike, and I can usually get a decent, useable tone out of most modern equipment. This month, I’ll share some of my thoughts on dialing in great tone on amps, pedals, and guitars.
Another application of a fuzz pedal is available when the user has control over the the amount of feedback signal routed back into the transistor loop while the pedal is engaged. By configuring the feedback to more sensitive levels, the pedal will feed back into itself causing oscillation*. As the pedal oscillates, certain frequencies will be produced, causing a singing sustained note without the guitarist playing anything at all. The player can consequently play over the note produced to cancel out the feedback loop, but once the player stops the pedal will feed back into itself producing the configured signal once again.

Jump up ^ The little finger whose use is not completely standardized in classical guitar technique can also be found designated by e or x. There are several words in Spanish for the little finger: dedo meñique, dedo auricular, dedo pequeño, but their initials conflict with the initials of the other fingers; c is said to be the initial of the dedo chiquito which is not the most common name for the little finger; e and x are not initials but letters that were picked, either with its own rationale, by people who didn't know what else to pick
Praises and recommendations continue to flood the reviews of the Fender Super-Champ X2 HD, pointing to its great value for money as its main selling point. Even users who are not happy with some of the extra features agree that the amp gives you more than what you pay for. As expected from a Fender tube amp, clean tone is well received, while others are equally happy with the other voicings. Another plus for the Super-Champ X2 HD is that it gets good feedback from guitarists of different playing styles and instruments, be it single-coil equipped or even those with active humbucker pickups.

In this buying guide, you’ll learn the essentials of what effects pedals do and which ones to look for depending on the kind of tone you want to experiment with. Here’s the quick overview: effects pedals (also called “stompboxes”) are electronic devices that connect in-line with your guitar and amp to change the signal going through them. Some work with analog circuits and some are digital, but they’re all powerful tools for shaping your sound in endlessly creative ways.

The $300-$500 price range of acoustic guitars is perfect for all levels of players. Whether you are a beginner, intermediate or advanced player, this price point gets you a good guitar that will sound great while not breaking the bank. While you won’t find any American made acoustics under $500, you will find some by popular American brands offering cheaper versions of their high end guitars that are made in Mexico or China.
The Alvarez AG75CE is on the upper range of $500 acoustic guitars. This particular model is a cedar top with rosewood back and sides. It also features scalloped and forward shifted bracing which makes for a bigger sound. Owners of this guitar are posting rave reviews citing it’s quality of build and great tone. The cutaway is a nice feature for those that want to reach the upper register of the guitar, and it looks cool too! It is a grand auditorium body, which does not quite have the bass of a dreadnought but offers a more balanced sound. Great for singing along. This guitar is a great choice for intermediate players looking to not break the bank.Check it out here.

The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.
Most metal guitarists would kill to have half of the power and precision of James Hetfield’s right hand, not to mention his ability to write the most devastating riffs known to mankind, from “Seek and Destroy” and “Creeping Death” to “Enter Sandman.” Of course, most musicians with skills comparable to Hetfield’s have such big egos that they become the targets of our murderous intentions. That’s not the case with Hetfield.

The modern "tone block" is a design-based marketing approach from EBMM starting in their guitars a few years back. It originally involved routing out an alder body, fitting a block of mahogany from just behind the bridge to the neck join and applying a top to the guitar. It is an alteration of the design and some purists believe they hear a difference in the tone of the guitar versus plain alder bodied or mahogany instruments.

Still available in Japan in ’66, but not promoted in the U.S. by Teisco Del Rey, were the Teisco TG-64 “monkey grip” guitar, its companion TB-64 bass, plus the similar non-grip NB-1 and NB-4 basses. The three-pickup TG-64 had a striped metal guard and the four-and-two hooked headstock with a metal plate on the front. The TB-64 probably still sported a plastic guard and three pickups. However, in the Japanese catalog from ’66, the TB-64 appears to be a 6-string bass, with an elongated variant of the hooked headstock with a rounded tip and a four-and-two tuner arrangement.
The Old Standby is another model beloved by generations of harmonica players. Up until the 1990s, this model was a quality instrument made in Germany on a wood comb. Where the Marine Band was the choice of blues players, many country music players such as Charlie McCoy preferred the Old Standby. In the 1990s, Hohner began manufacturing this model in China on a plastic comb with a significant decrease in quality. Among harmonica fans the downgrade remains unpopular.[26]

To fulfill the diverse requirement of our esteemed clients, we are engaged in offering them a wide range of Electric Spanish Guitar. This offered range of Electric Spanish Guitar is available with us in various shapes and size and can also be modified as per our clients requirement. Our clients highly appreciate our offered Electric Spanish Guitar for its
As an example of pre-distortion EQ, Eddie Van Halen places a 6-band MXR EQ pedal before the Marshall amplifier head (pre-distortion EQ). Slash places a Boss GE-7, a 7-band EQ pedal, before his Marshall amp. This technique is similar to placing a Wah pedal before the amp's preamp distortion and leaving the Wah pedal positioned part-way down, sometimes mentioned as "fixed wah," (pre-distortion EQ), along with adjusting the amp's tone controls (post-distortion EQ).
But the question remains, was that environment good for the artists or for the equipment? Think of it this way: experienced chefs know very well the value of a seasoned pan or grill. Flip on any show from the Food Network and you’ll see cooks bragging about their 30-year-old griddle and how it imparts an amazing flavor to their corned beef hash. Preparing food leaves behind actual physical substances, unlike immaterial sound waves, so that comparison doesn’t work exactly. But the dirt and dust and grime could certainly effect the equipment. In a similar way, we have to ask ourselves, was that dirty studio, then, a source of inspiration or were the dirty, beer-smelling microphones actually improving the music? Regardless, the studio imbued the recording with an undeniable quality. Many guitar nuts can identify a particular instrument while listening to a song. Recording experts can do the same thing with studios.
With so many features, it can be tempting to just dismiss it as a low quality jack-of-all-trades unit, but even experts are convinced of its versatility and sound quality. Guitar World concludes: "Costing less than most single-effect stomp boxes, the G1Xon is an incredible bargain that provides versatile multi-effect processing power and impressive performance and practice capabilities."
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Sitka Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 45mm - Fingerboard: Rosewood - Frets: 20 - # of Strings: 6 - Scale Length: 25.4" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Antique Blonde
The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.
The most defining feature has got to be the neck. It’s thicker than the standard Strat neck, which gives extra meat to work with when bending those strings. Even the fretboard was designed around this technique, with its narrow frets and flat fretboard. It’s not the cheapest one out there, but Fender Stevie Ray Vaughan Stratocaster is definitely one of the best Strats around.

The output jack is where you plug in your guitar lead. These are generally 1/4″ and transfer the signal created by your pickups to your guitar amp. They are usually connected from a ground wire and input wire. When the lead is plugged into the output jack the signal can be transferred. These can often be a source of trouble and need to be kept tight to reduce noise.
Playing different guitars in a music shop is a great way of familiarising yourself with each model's unique qualities but don't forget to take off any objects that could scratch the guitar. A music salesman will let you try as many guitars as you like but may not be too happy about the little scratch your coat button left. Your choice of guitar will usually be based on the type of music you wish to play and the aesthetic appeal of the colour and design.

The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.
So fun...I like...Let me start off by saying I'm not even a game person I bought this game for my son than watching him play it I took over and couldn't stop playing it I played it non stop until I beat it the content and visuals are great...The only downside was that I was so addicted to this game that I finished it in about one week, but I already am planning on playing it again on a higher difficulty and with a goal of finding more of the hidden treasures that are sprinkled throughout the game.
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
I like the difference in character of some of the amp distortions, then you get the tome knobs of the amp, different speaker emulations with tone controls and the graphic eq. So there is a lot you can do to get the right tone. My complaint on that is that the "mixer" mode cuts the highs (since there is no amp to do so) cuts thee highs too much. If you go flat with the graphic EQ the amp emulations are always a little too dark.
I played electric guitar in a band from the age of 12 through to the age of 36, then gave it up. Now, at the age of 68 I want to get back into playing. I went into a store and tried playing and found that my fingertips really hurt! Are there any electric guitars where the metal strings don’t hurt or do I just need to “grin and bare it” until my fingertips get calloused again?
Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.
The vast majority of guitars use more than one pickup, and provide a switch that controls which pickup, or combination of pickups, is active at any one time. This article adds one more pickup to our circuit and shows how we can wire up a selector switch. We look at both toggle and blade style switches. This brings us to the point where we now know how to wire up a Telecaster in the standard way.

The pitch shifter effect can also be used to detune or “capo” a guitar without the need to actually retune the instrument.  These detuning type pedals have become prominent in the age of dropped tunings and seven string guitars.  The Digitech Whammy Pedal is the most widely known pitch shifter for guitarists and has been used by players like Jonny Greenwood of Radiohead and Tom Morello of Rage Against the Machine fame.

Busker? If you're a busker, you're better off with an amp that does not require a power supply. The Roland Micro Cube is a great little amp, very popular with buskers who require amplification due to its portability, cheap price and the fact it can be powered by batteries! It's pretty loud, too! Here's a great blog on some of the best amps for busking.

Finally, there was a mysterious lap – clearly Valco – which had no real National or Supro equivalents. This had tapered shoulders that swept down, wing-like, to the bottom, which had a little concave cutout. It was covered in ivory plastic on top, with black-lacquered sides. It had a rosewood ‘board with dot inlays. The pickup was the new exposed-pole single-coil with a bolt-on handrest, in front of narrow rectangular plate that held the saddle and attaching holes. Volume and tone knobs sat on little mini-plates on either of the strings. Another atypical downscale version of the National New Yorker was offered at the same time by Montgomery Ward.
One difference today is the number of big-name guitar brands that make affordable acoustic and electric guitars, which are often versions of their pro-level instruments. These days, you can own a Les Paul or a Stratocaster as a beginner or intermediate player. Of course, they aren’t the same as the Gibson or Fender flagship models, but they are still darned good guitars based on those designs.
In the 2000s, new developments in bass amplifier technology include the use of lightweight neodymium magnets in some higher-priced cabinets and the use of lightweight, powerful Class D amplifiers in some combo amps and amp heads; both of these innovations have made transporting amps and cabinets easier. As well, some 2010s-era bass amps and heads have digital effects units and modelling amplifier features which enable the recreation or simulation of the sound of numerous well-known bass amps, including vintage tube amplifiers by famous brands (e.g., Ampeg SVT-Pro amp heads) and a range of speaker cabinets (e.g., 8x10" cabs). Digital amp and cabinet modelling also makes transporting bass amps and cabinets to gigs and recording sessions easier, because a bassist can emulate the sound of many different brands of very large, heavy vintage gear without having to bring the actual amps and cabs. Another trend for higher-priced and higher-wattage amps and cabinets aimed at professionals is providing Speakon speaker jacks in addition to, or in place of traditional 1/4" speaker jacks. Speakon jacks are considered safer for high wattage amps, since the bassist cannot accidentally touch the "live" parts of the cable end and they lock in, so there is less risk of accidental disconnection. As of 2017, a few digital amp and cabinet modelling amplifiers have a USB input or other computer input, to enable users to download new sounds and presets.
As I commented above, my go to method for quiet practice is a PocketPod with Shure headphones. But, who doesn't like plugging in to an amp every once in a while? I live in a house, but the neighbors are close. The amp I use is a Fender Super Champ XD, which is a 15w tube amp with some digital effects. It seemed quiet enough at low volumes, but your mileage may vary. If I were you, I would at least give one a listen at a music store and see if it can do what you need.
Learning guitar chords is often one of the first things beginner guitarists do. You only need to know a few popular chords in order to be able to play a huge amount of songs. This beginner’s guitar chords article will provide you with the necessary chords you’ll want to learn for both beginner and intermediate players. Before jumping into learning the chords provided in the guitar chords chart below, I wanted to first explain what a guitar chord actually is. What Is a Guitar Chord? As wikipedia defines it, “a guitar chord is a set of notes played on a guitar”. Although a

Great guitar at this price point. Want to make it better? For so little money you can add lighter strings, a bone saddle, bone nut and pins. It's not necessary but they may help some. A bunch of small improvements put together make a big difference. What really does make a difference is having the action set up properly. Lowering it made it much easier to play for me. The finish and craftsmanship on this guitar is excellent.

Nice-Keys-CompletePlus-JNv2.0  A large set with three different piano types plus all the nice instruments.  All in a package of 943mb.  Pianos have different brightness and resonance settings available and all the nice instruments from EPs, Pads, Organs, Strings, Orchestra and Synths are included.  A printable link to the list of available instruments is here  Nice-Keys-CompletePlus-Instrument List
Basic guitar chords are built using the first, third, and fifth tones of the scale that corresponds with the chord you want to play. For instance, if you want to play a G major chord, you go to the G major scale and find the first, third, and fifth notes in the scale. The G major scale has one sharp (F), so the notes in the scale are G-A-B-C-D-E-F#. The first note is G, the third note is a B, and the fifth note is D. These are the notes you need to make a G major chord. If you wanted a G minor chord all you need to do is make the third note a flat. This system applies to any chord you want to build. These three note chords are called triads and make up the bulk of the beginner open positions chords you’ll use to play a lot of guitar chords songs. When you study these chord shapes, you’ll notice that the root of the note (the first note) usually appears on the lower string and is doubled on a higher string, which reinforces the key tonality.
Reading the comments, looks like people dont like Ibanez, in my 15 years of guitar playing I have own three, all mid-lowend models in the RG series, those things are of amazing value they can take a lot of abuse and still sound great. I dare to compare them whit my SL3 jackson a guitar that costed me three times more than any Ibanez I had own, the only big difference are the pickups because other than that the built quallity is much the same and I dare to say Ibanez uses better compenets (frets, pots, switch) than Jackson...
In general, this measurement is taken by measuring the distance between the bottom of the string and the top of the 6th fret while holding the string down at the 12th fret and the first fret. This is where the capo comes in handy - put it on the first fret so your hand is free to take the measurement. Using a feeler gauge of the desired height, in this example, 0.010, hold the low E string down at the 12th fret (with the capo on the first fret), and measure the distance between the top of the 6th fret and the bottom of the low E string. If the distance is greater than the desired relief, then you need to turn the truss rod clockwise (towards your right) as you're looking down the headstock towards the body of the guitar. If the distance is less than the desired amount, then you need to turn the truss rod counter-clockwise (towards your left) as you're looking down the headstock towards the body of the guitar. The basic rule is:
It's interesting how one of the biggest brands in guitar amplification was built by a drummer! The story goes that professional drummer Jim Marshall was inspired by Pete Townshend, Ritchie Blackmore, and Big Jim Sullivan to develop a louder and better sounding amp. And he went about it by looking at a popular American amp design (i.e. Fender Bassman) and finding ways of how to improve it. After many prototypes, Jim and his team eventually came up with an amp that had their own "Marshall sound", this amp inherited the JTM label, an abbreviation of Jim's and his son Terry's names. The rest as they say is history, with Marshall being one of the most familiar amplifier brands, even to none musicians. Their brand is still the amp of choice for a long list of virtuoso guitarists, including Jimi Hendrix, Jeff Beck, Eric Clapton, Jimmy Page, Slash just to name a few. While their vintage and professional level amplifiers are still very much in demand, the company is not doing as great in the entry level to mid-tier market - which really is the bulk of where sales and reviews of come from. Still, their fans gave them enough good feedback to make it to this list, thanks to the improvements they are making to their entry level line of amps.

In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.
If you are inexperienced, it is only recommended that you attempt to setup a guitar that is of little value to you, both financially and sentimentally. If you don’t have one that fits these requirements, then it is best to pay the cost of a guitar setup as performed by a professional. The primary risk while setting up the instrument is over adjustment. Working any part of the bridge too much will cause wear and tear, and irreparable damage to the neck is often the result of improperly adjusting the truss rod. It is always hard to justify ruining a perfectly good instrument in order to avoid guitar setup cost.
You honestly could get a single multi-effects unit that will already have thousands of the most popular stompboxes built in, plug it into your PA or headphones, turn on one of the many built-in amp modelers, and you’re good to go. This is actually a solution that many touring musicians have gravitated towards, as it is so much easier to just carry around a single multi-effects unit compared to a pedalboard with several different pedals and a separate amp.
I have no idea what the set measurement is for the Authentics, and if it is any different than other guitars. Probably not. But guitars settle during their initial acclimation period and the exact bow of the neck and arch of the top can change. Actually it is almost certain to change some. There have been reports of all sorts of Martins with action reaching up near or over the maximum height within spec. But the same holds rue from brand of guitar that uses organic materials like solid wood.
In reality, arenas and festival grounds are the only places where anything bigger than a half stack would make sense. In smaller venues, the problem is always the same: amps can't be louder then the drums or the vocals. Listen to any good recording of your favorite bands and you'll notice that the kick drum, snare drum, and vocals are the highest in the mix. If you don't replicate this live the songs sound lost and washed out.
With guitar companies continually coming up with new models or refreshed versions of their bestsellers, guitar players can feel both excited and overwhelmed to try out and buy the latest shredders and jazz boxes. Will these really be better than their vintage archtop or not? Are the new humbuckers any good? Will the new version of an old favorite be a good buy? – And the list goes on.
Starting from the body, we see the standard Les Paul shape. The tonewood of choice is mahogany, as expected, but this time it comes with a maple top. The top of the guitar arches slightly just like the original Les Paul does. In terms of details, we see a white binding around the top section that really stands out on the dark matte finish.  It's something to behold.
The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. Therefore, Gibson products purchased through The STRATosphere are not covered under warranty by Gibson Brands, Inc.
3.  This one is not so much a customer fix as customer negligence.  A crack in the top of an acoustic that is not addressed right away.  Dirt and grime are allowed into the crack and oxidizes the surfaces so that what could have been fixed with a diamond patch on the inside has now become a fix that includes taking away the rotten wood and inserting a splint.  It can be very difficult to match the new wood with the old, and you better make sure the customer knows that his or her guitar will not look brand new.
Regarding truss rods, all vintage Martin instruments post-1934 have *non-adustable* truss rods (T rod). This means the neck better be straight, otherwise an expensive repair will be in order. To check neck straightness on a guitar, first tune the guitar to pitch. Then hold the low-E string down at the 1st and 14th frets. Note the distance between the bottom of the low-E string, and the 7th fret. You should be able to put a medium guitar pick in this space. Any more, and the neck is "bowed". Any less, and the neck is "back bowed". Repeat this with the high-E string (the same results should be seen; if not, the neck has a "twist" to it).
Have you ever heard a bridge pickup that made a guitar sound like a giant mosquito attack? If you've run into this problem, The Tone Zone is the solution. The Tone Zone is hot enough to qualify as a high-output pickup, but it has a wider dynamic range - hard picking will produce a lot of power, and softer picking will be much cleaner and quieter. It's got tremendous bass and low-mid response to reinforce the bottom end and make the overall sound bigger. The highest single notes have depth, and chords sound huge. Patented dual-resonance coils reproduce more overtones than you'd expect from such a fat-sounding pickup. It makes a great match with an Air Norton.

Launch price: $2,419 / £1,943 | Body: Alder | Neck: Maple | Scale: 24" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Bare Knuckle Johnny Marr single coils | Controls: Volume, tone, 4-way pickup selector switch, 2x 'bright' slide switches | Hardware: Jaguar bridge with Mustang saddles and vintage-style floating vibrato | Left-handed: No | Finish: Olympic White, Metallic KO
The Canadian firm Godwin is another popular name for producing best quality electric and acoustic guitars. (Have you heard of Seagull acoustic guitars? It’s the same brand.) Godwin outshines among the world of guitars due to producing high-end instruments with surprising variations. They even manage to touch bass too. Not only the Godwin guitars depict quality, but also reflect classiness.
A bass stack may use a single speaker cabinet (e.g., the huge 8x10" cabinets widely used by hard rock and metal bassists). The 8x10" cabinet is often provided as "backline" equipment at music festivals; this way, all the bassists from the different bands can use the same amplifier and speaker cabinet. This reduces the transition time between bands, because the roadies do not have to remove the previous band's bass stack and bring in the subsequent band's stack. Using one 8x10" as backline gear for an entire music festival also makes the transition easier for the audio engineer, because she can have an XLR cable plugged into the amp head's DI unit output (to get the bass amp's signal so that it can be mixed into the sound reinforcement system mix) and have a mic set up in front of the cabinet, to capture the amp and speaker cabinet's distinctive tone. The 8x10" cabinet is widely used by heavy metal music, hardcore punk and psychobilly bassists, as these genres use a loud onstage volume. Some metal bassists, such the bass player for death metal band Cannibal Corpse, use two 8x10" cabinets for large concerts in stadiums or outdoor festivals.
Gain is the strength of the electronic signal carrying your sound. A standalone gain booster is essentially just a preamp, and can be an effective way to overdrive the preamp section of your amp, creating easier musical-sounding breakup and increasing the amp's power. A gain booster in a stomp box lets you instantly boost your sound level for solos without altering your fundamental tone.
Great Martin Copy from the later 60's This example is a Well Crafted in Japan model with the "orange lable" Nippon Gakki highly collectable now as a great player Martin like player. Great wood...just see the pics WoW! Sitka Soruce Top, Premium AAA Grade Mahogany neck - sides & back...Made by serious craftsmen high degree of skill and well balanced. Nice big Tone as a Martin same type X bracing and is a proven performer. Nicely aged wood and is a wonderful playing 7 sounding vintage guitar equal to many more expensive builders like Martin. This one has a slight stable old top crack as glued and is not an issue anymore...Plays like butta...You will love the sound! .

More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.

@NeilMeyer I used to believe that as well until I started noticing songs that used the flatted 7th degree chord instead. It's generally easier to play those major chords for a beginner than diminished chords. Since the answer is provided for beginning students, I presented the easier approach. Notice the chart also leaves out some major keys which feature more difficult to play chords. Keeping it simple for newbies. Tim referenced this (music.stackexchange.com/q/29817/16897) – Rockin Cowboy Jan 18 '16 at 17:26

The Kay Gold Line professional series became synonymous with that rich gutsy Blues/Jazz sound that eventually became rock. This unique blues sound was not available from any other guitar of that time. For the past decade vintage Kay instruments have been fetching high prices and have had increasing interest from collectors and players because of the cool, campy look and that unique Blues/Jazz sound.
Fender’s step-down Squier brand has offered unbelievably full-featured guitars, and the Bullet Stratocaster has classic American looks, a great sound and a price tag that will feel plenty comfortable for a beginner. It has a 21-fret neck (not the full two octaves of a pro guitar, but still pretty expansive) and a soft C-shaped neck that will make it easier for a player to get a feel for it. There’s a vintage hardtail bridge, so Fender has foregone the addition of a floating tremolo system, but that is probably better for a beginner as it will increase responsiveness and tuning stability.
Continuing with the rock and metal theme we’ve got going, we come to the Schecter Omen 6. At the time of this writing, the Omen 6’s price on Amazon is about $50 cheaper than you’ll find anywhere else. I hope that continues long after I publish this, because the Omen 6 is an amazing guitar and finding it under $300 is a steal (and may not last long).
: But in general, there's nothing wrong with Decca electric guitars, especially for indie musicians today who are looking for a vintage guitar with some character to it. Since most vintage guitar fans have seen every model that Gibson, Fender, et al, have ever made, many of the Japanese guitars of the '60s have a fresh look that stands out from the crowds. In 20 years, the M-i-J electric guitars of the '60s are going to be worth 4 or 5 times what they sell for now, and smart collectors who either can't afford Fenders, Gibsons and their ilk from that period, or who are interested in something more unusual, are already snapping them up.
{ "thumbImageID": "Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray/J39264000001000", "defaultDisplayName": "Ibanez Iron Label RGA Series RGAIX6FMT Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Gray", "sku": "sku:site51500000013761", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,377.76", "priceVisibility": "1", "skuUrl": "/Ibanez/Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray-1500000013761.gc", "skuImageId": "Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray/J39264000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray/J39264000001000-00-60x60.jpg", "imgAlt": "" } ] }
Sal-Stein-Uprights-UltraCompact-JNv2.0   A great set with all three pianos (Yamaha C5 Salamanders, Steinways and Uprights) available to play at various brightness levels plus optional resonance.  The pianos have been compacted a little and the Salamanders have 6 carefully selected full range velocity layers rather than 15 but the sound is not compromised.  All samples are still very long (just not needlessly long). These are already included in the Nice-Keys-CompletePlus and Nice-Keys-Extreme.
If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.

First, you have 11 different modes, including the TonePrint option, just like the Flashback delay. Then you have a true bypass circuit with an analog dry-through signal, which perfectly preserves the natural tone and EQ of your acoustic guitar (again, similar to the Flashback's setup). When you're using the effect, we would advise tinkering with the mix to get about 35-50 percent of your dry signal coming through.

Randall deserves to be up here in this list. Don't get me wrong, they've got a lot to contend with, in Orange and Mesa Boogie in particular, but Randall have always crafted excellent amps. Rugged build and vast tonal opportunities make this brand a mighty force, I mean they were good enough for Dimebag Darrell and countless others, enough said really...
Re-amplified Distortion: This re-amplified distortion is audible by comparison, when switching between a solid-state and valve amplifier in real time. By paying close attention, it is heard as a fine spurious inter-cluttering within the music. This is clearly noticeable with efficient speakers but not with inefficient speakers. Valve amplifiers are inherently linear. Their natural gain is small and therefore require minimal or no negative feedback.
There isn't a shredder on the planet who doesn't remember their first electric guitar. In fact, it's for that exact reason why your first electric guitar should built with meticulous attention to every detail. In this section, you'll find an impressive range of beginner electric guitars that were designed with your ambitions in mind, so you can enjoy sharpening your skills on that same special instrument for many years to come. Everyone who has a passion for playing music deserves to hone their craft on an electric guitar that is a perfect balance of playability, beauty and tone. But that sentiment especially applies to beginners, so they can build the confidence necessary to continue on with the instrument. Thankfully, all of the most well-known guitar brands specialize in their own beginner electric guitar models. From Ibanez and Epiphone to ESP and Dean, these companies take great pride in nurturing the skills of future pluckers, strummers and shredders. Squier is no stranger to the world of beginner guitars, and their Vintage Modified Jaguar HH electric guitar is everything a budding up-and-comer could ask for. Featuring a 24'' scale fast action neck, and a set of Duncan Designed pickups for a multitude of humbucking tones, the Squier Vintage Modified Jaguar is an updated sunburst classic that looks and plays like a dream. Another big-seller is the Epiphone Les Paul 100 electric guitar. Consisting of open-coil humbuckers and a genuine Les Paul sound, this axe contains superb electronics and a solid tone, while the tune-o-matic bridge ensures you that this beauty will stay tune through an abundance of practicing. It's incredible to think that at one moment in time, Jimmy Page had difficulty forming an open chord, or that Eddie Van Halen had trouble with hammer-ons. But even the greatest guitar players had to start somewhere, just like you. Every guitar player improves with time, and when you have a beginner electric guitar that's constructed by professionals, the learning stages feel will less like a duty, and more like the start of an exciting adventure.
the guitar was made for gretsch by Tokai Gakki in the very early 70's.they sound sweet play great, i have one also .at age 40 it needs very little more then a frett job to fix it back to like new. mine is a model 5989. is 6028. I don't hink it is worth much. It''s just an old japaneses import. It is a well made guitar and I enjoy playing it since my other guitar got stolen....
While all of the aforementioned stomp boxes (pitch shifter, envelope follower, wah pedal, compressor and overdrive/distortion) should be plugged into the amp’s input, modulation effects can be connected to an amp’s effects loop instead of into its input. Again, this is a matter of taste. Some guitarists prefer the more “pristine” sound quality of modulation effects patched into an effects loop, particularly since this setup can help reduce overall noise.
Adding to their already good value, most multi-effects come with built-in features that are essential to gigging and practicing, first of which is a built-in tuner. Looping is also a good feature to look for, thankfully it now comes standard for most units. Having the ability to record straight to a computer is another handy features that should be considered, as well as the ability to edit the settings via your computer or mobile device. Built-in metronome/rhythm is also a nice plus, especially for those who want to take their skill to the next level.

By 2001, Michael Kelly Guitars added its first acoustic guitars and electric guitars. These collections have evolved and are now sold around the world. To this day, Michael Kelly remains focused on our vision statement to be "Built On Sound" and each time we put the cherry on top by giving the musician a bold look. We are proud that we do not offer the cookie cutter boring guitars that are readily available from so many brands. We know there are players that prefer classic simplicity and we very much respect that. However, Michael Kelly will continue to be the brand of choice for those that prefer something more boutique and unique.

Except I wasn’t. Because, really, I could only make two types of sounds. There was the clean, flat, boring, plugged-in-acoustic one. Or I could push the little red button on my starter amp and get a muddy, cloudy, mess of a distortion. However, I was, at this point, somewhat blissfully unaware of what I was missing. I made do with what I had and spent my evenings rocking my house (sorry family).
CLEAR COATStew Mac sells nitrocellulose lacquer that works realy well for guitar finishing but if your like me you can't afford $10 a can for paint. Or you can check out reranchthough I haven't used any of their products they are a little cheaper. I use Deft spary lacquer. You can get it at Wal-Mart for under $5 a can and it works great. Use the same basic steps that you used when you sprayed you color coats, keeping in mind that you want enough coats so you don't cut through the clear top coat when wet sand and polish it out. Now comes the waiting. The paint has to set for several days to a month to let the solvents that are in the paint to rise to the top and harden. The paint will feel dry but you will notice that it might feel a little sticky or soft when you touch it. I like to do a "nail" test on mine. I use my finger nail and push it into the painted area in the neck pocket to see if it is still soft. No one will see the inside of the neck pocket so it's ok if you scratch it. Once it has cured completly you shouldn't be able dent the finish. It could take longer than a month for certain finishes to harden completely but trust me, you will be glad that you waited. For more information about all the different types of lacquer or clear coats products that are out there and how to choose what may be right for you, check out the drum foundry they have some great info.
The most common overdrive will also alter the tone of the input signal by adding in a muli-processing chip within the circuitry. Such as the classic Ibanez TS-808, made in the 1980's, having the MP-D01201A multi-processing chip. Depending on the brand of the overdrive, the installed multi-processing chip and the preferences of the player, this type of overdrive is typically a go-to overdrive and is commonly the cheapest to purchase.
Finally, we come to our time-based (and space-based) effects group. This includes reverb and delay. Both are forms of the same effect with reverb being a much faster version of delay. All they do is take the input and "smear it out" while reducing the volume over time. Not only does this create an extremely complicated signal that other effects won't react to well, but the variances in volumes these create would further confuse the previous pedals.
Edit: After reading everyone's comments I've decided to let the technician give my strat a first time setup and I'll try to absorb any information I can in order to be able to do it myself one day. I realize many of you have some pretty cool guitar shops that'll do a free setup so I'll try to negotiate something. I'll be sure to record the condition of the guitar itself before the setup in case the technician chips it or scratches it. I'll also check out Dan Erlewine's books like the guitarist below suggested. Thank you all for your advice, I really do appreciate it and I hope to be as wise as you all are when it comes to guitars someday.
Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.
Gibson and Fender have been ripping the public off for years, they're not even close to being worth what they charge especially Fender with such a mass produced bolt on neck and lame finishes design. Carvin is a superior guitar in every way and what people fail to mention is that you can choose what wood and finish you would like as well as bolt on neck, set neck or neck through designs and their pick up's are impeccable. A truly great guitar co. With excellent customer relations and real musicians will all show respect for Carvin when mentioned if not already owning one.
Epiphone Zakk Wylde Les Paul Custom Plus Bullseye Solidbody Electric Guitar at a Glance: Loaded with Zakk's blazing-hot custom EMG active humbuckers Totally solid mahogany body and hard maple neck deliver freakish sustain Premium hardware put this Les Paul in a class all of its own Loaded with Zakk's blazing-hot custom EMG active humbuckers Turn up the heat with a pair of the most outrageously amp ...
The body of an acoustic guitar is composed of the top, also called the soundboard. The soundboard is supported by internal bracing; the sides, and the back that together form a hollow chamber. The upper body curves are referred to as the upper bout, while the usually larger lower body curves are called the lower bout. The area between them is referred to as the waist.
Let's start with the scenery. The guitar riff I'll use today was conceived using an effects chain made up of a delay pedal (the Electro-Harmonix Memory Boy). The pedal doesn't have a tap tempo feature, so I had to adjust the delay time by ear as precisely as possible while playing the song. Recorded in the "classic" way, without racking my brains and simply putting a mic in front of the amp, I get something like this:
Beginner amps aren’t going to be packed with features, but they should include good clean and distortion sounds, plus a decent EQ layout to shape your tone. Part of your journey as a newbie guitarist will include discovering what tones you like and don’t like, and that’s hard to do with a cheap amp that only produces one generic sound. If your first amp has some reverb or onboard effects, that’s a bonus.

EMG DG20 David Gilmour Wired Pickguard   New from$329.00In Stockor 8 payments of $41.13 FREE 2-DAY SHIPPING Seymour Duncan SH4 JB Humbucker Pickup   New from$79.00In Stockor 4 payments of $19.75 FREE 2-DAY SHIPPING Gibson '57 Classic Humbucker Pickup   New from$164.99In Stockor 4 payments of $41.25 FREE 2-DAY SHIPPING EMG JH Set Custom James Hetfield Signature Pickup Set   New from$249.00In Stockor 6 payments of $41.50 FREE 2-DAY SHIPPING See All Electric Guitar Pickups

My cousin Mike had a red Lotus LP Custom copy that his mom got for him, it was a bolt-on one, looked just about like the one you have in your pic. It played pretty nice, but the tuners and pickups sucked. We added a set of Grovers and a pair of (then popular) DiMarzio super 2 pickups. Mike used this Lotus guitar for 3 or 4 years until he got a Guild s-100. He sold the Lotus for 125.00 after taking off the DiMarzios and Grovers. He gave me those parts and I installed them on a stripped and mutilated 71 SG Standard that I painted with auto enamel (a nice Candy red). I later sold the SG to Mike. The lotus had a plywood body and was pretty cheap, I wouldn't pay a 100 bucks for one today, if anything. But, back then, it was as good as any, we worked with what we could get. I know we played some excrutiating unison leads (ala Blackfoot, Molly Hatchet,etc) he with his souped up Lotus, me with my Memphis Strat copy, both plugged into my bitchin solid state Crate (looked like a real wooden crate!) amp.
You should have been making all the above adjustments with the preferred gauge of strings, but since you have probably loosened and tightened the strings a number of times over the course of this process, you should now put on a fresh set and do a final check of all the settings Neck adjustments in particular can tend to settle in over the a couple hours after they have been done, so I find it best to then let the guitar sit overnight and do a final check the next day. The bottom line in ending up with a quality set-up is making each of the important adjustments in the correct order: Neck- then Nut- then Bridge saddles.
For beginning electric guitarists—or experienced players who want something inexpensive and portable—we think the Fender Champion 20 is the ideal amplifier. We researched 24 models, then put the 10 most popular to the test for 20 hours with two professional instructors, a guitar student, and our Wirecutter West Coast musical instrument testing team. With a colossal variety of sounds, plus built-in effects and intuitive controls, the Fender Champion 20 was a nearly unanimous top pick.
LPM is an online music school. We teach a variety of instruments and styles, including classical and jazz guitar, piano, drums, and music theory. We offer high-quality music lessons designed by accredited teachers from around the world. Our growing database of over 350 lessons come with many features—self-assessments, live chats, quizzes etc. Learn music with LPM, anytime, anywhere!
Fender’s quality is as widely known as their steep prices. It’s no secret that not everyone can afford one of their guitars. This is why they acquired Squier a long time ago, and tasked the company to build more affordable versions of their guitars. In the beginning the quality was iffy at best, but today the situation is completely different. Squire of today is a trustworthy brand that brings cost effective Fender style guitars to those on a budget.
Fulltone’s popular Full-Drive pedal has the bonus of a switchable booster channel, while its overdrive channel goes to a fairly high gain and, unusually, uses asymmetrical clipping for a more textured sound that is quite different from the Tube Screamer’s. Asymmetrical clipping is also at the center of Boss’ SD-1 Super Overdrive (as used by Eddie Van Halen), generated by a circuit that uses two silicon diodes in series in one direction, and only one in the other, to clip each side of the waveform differently. Some players credit asymmetrical clipping with more richness, body and character; others say it sounds clanky and harsh, like an amp with mismatched output tubes. Then again, some guitarists—those in the former camp, probably—say they prefer the sound of mismatched output tubes for these same reasons. As ever, what works is up to you.
I've played a Telecaster for years exclusively However i have tried playing a Les Paul and i remember thinkin how much easier it was to play. What guitar would you say was the easiest to play? I know it can be subjective but it seems to me that metal guitars are designed to play fast so they are made easier to hit notes etc. I'm guessing something like what steve Vai plays would be so easy and nice to play regardless of tone etc.
The Ibanez TSA15H gets most of its high ratings from users who love the sound of a cranked tube amp, because this is where it excels. This is especially true of guitarists who use single coil guitars, but there are some humbucker users who are just as impressed. Even experts commend the amp's dynamic response, Premiere Guitar's Kenny Rardin comments: "It feels and responds like a good tube amp, and varying the controls dials in the response even further". Value for money and reliability are also commended, as expected from Ibanez.
The 2-6kHz region is good for adding bite or presence to guitar tracks at the mixdown stage.There is no 'right' electric guitar sound because the instrument has no natural sound, so you can use as much EQ as you like without feeling guilty. Even so, getting something close to the desired sound at source is always the best way to work. Should you need to use EQ, here are a few comments concerning the frequency areas you might want to tweak. Boxiness tends to occur between 100Hz and 250Hz, so if this is a problem, use a parametric to tame it. Experiment with the Q setting as you may be able to notch out a narrower section than you think to get the desired result. Cabinet thump can be accentuated by boosting at around 80-100Hz, but take care not to boost anything much lower than this, as you'll just bring up unwanted resonances and hum.
New York City native Joe Charupakorn is a guitarist, author, and editor. He has interviewed the world’s biggest guitar icons including Steve Vai, Joe Satriani, Yngwie Malmsteen, Carlos Santana, Neal Schon, and Dave Davies, among many others, for Premier Guitar. Additionally, he has written over 20 instructional books for Hal Leonard Corporation. His books are available worldwide and have been translated into many languages. Visit him on the web at joecharupakorn.com.
{ "thumbImageID": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "defaultDisplayName": "Schecter Guitar Research Hellraiser C-1 with Floyd Rose Sustaniac Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51361806818304", "price": "1,099.00", "regularPrice": "1,099.00", "msrpPrice": "1,549.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry-1361806818304.gc", "skuImageId": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000-00-60x60.jpg", "imgAlt": "" } ] }
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.
{ "thumbImageID": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "defaultDisplayName": "Ibanez GIO series GRGR120EX Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "White", "sku": "sku:site51500000032825", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-White-1500000032825.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51500000032826", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue-1500000032826.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000-00-60x60.jpg", "imgAlt": "" } ] }