Surprisingly, perhaps, given their reputation for fragility, ribbon mics also seem to be widely used for electric guitar, with models from Beyerdynamic, Coles, RCA and Royer all putting in appearances. Producers using ribbons include Thom Panunzio, Joe Barresi, Steve Albini, Ed Cherney, Bill Bottrell and Butch Vig — Eddie Kramer even goes as far as to say that "to me, the best guitar mic is the Beyer M160, which I've used for 30 years on Hendrix, on Zeppelin, on everybody."
The intervals between the notes of a chromatic scale are listed in a table, in which only the emboldened intervals are discussed in this article's section on fundamental chords; those intervals and other seventh-intervals are discussed in the section on intermediate chords. The unison and octave intervals have perfect consonance. Octave intervals were popularized by the jazz playing of Wes Montgomery. The perfect-fifth interval is highly consonant, which means that the successive playing of the two notes from the perfect fifth sounds harmonious.
I don't need freaky pointy demon guitar graphics or anything like that.....this $249 Agile makes my mouth water. For the price of two cheap pedals or one great pedal it's a guitar that you could work with. Ibanez makes the stylish P90 Jet King for about $375...If I were on a tight budget I'd rather have the basic Agile. Yes I'm aging! Get off my lawn you Jet King kids!!
It wasn't long before Southland went to hell in a hand basket. I would like to acknowledge the professionalism of people like the late Lee Ingber who was quality minded enough to know that junk will ruin any business. It's too bad that the last owners of Southland never learned that, even as their company faded into the sunset of the graveyard of greed.

While the decision to choose between bridges can be an overwhelming one, to simplify things, it’s better to choose one that’s appropriate for your skill level and your personal taste in music.  One bridge for the heavy metal genre may be absolutely frustrating for a country player.  For those with numerous guitars, you might have a different bridge on each instrument to suit that situation or style of music.

At the onset, we decided to stick to DIY electric guitar kits that can be bought from online retailers in the mainland US, to ensure that the ones we list are accessible. We then took note of popular and highly rated kits, which for this updated required us to gather around 700 relevant user and expert reviews and ratings. All these data are then fed into the Gearank algorithm, which gave us the scores that allowed us to narrow down the list to just the top 6 kits. For more information about this process see How Gearank Works.
Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.
Much of the difference between one make of guitar and another is in the player’s head. I doubt whether many people listening would really notice the difference and they certainly wouldn’t care. That said, there are differences in feel and in the player’s perception of the sound. I currently have four Gibsons and two Fenders, so you can see where my sympathies lie, but currently I’m more taken with either of my two Gretschs. One point of correction about scale length though. Over the years 25.5″ became standardised, probably by Martin. Fender copied this when it produced the Broadcaster/ Nocaster/ Telecaster since 25.5″ was the scale length for a guitar and Fender had no previous experience hence the poor neck radius and bad controls. Gibson, being actually considerably more innovative (I.e. the truss rod, the archtop, the raised finger rest/ scratch plate, controls for each pickup etc etc in fact most of the fundamentals we now take for granted) had worked out that scale length should be a function of body size. All of Gibson’s full size (17″ and up) guitars have 25.5″ scale lengths. Smaller bodies get shorter necks. So 24.75″ is only one of Gibson’s scale lengths sunce it has used shorter and longer as appropriate.

This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.
My mom just gave me a Norma FG12 acoustic guitar my father bought for her back in the day. It is in the original box and i honestly doubt it ever made it out of the box! It appears in pristine condition but I know absolutely nothing about guitars. I really don't care to learn how to play it. I would like to sell it but have absolutely no idea how much it is worth nor know the best place to try to sell (?ebay perhaps) Any suggestions/thoughts would be most appreciated. Thanks!

The looper is a little more limited and offers shorter loop time than its competitors (20-seconds), but hey, at least it has a looper. The inclusion of a USB means you can hook the DigiTech RP500 straight to your computer and start recording riffs and ideas. If you like, you can use the included Cubase LE software for all your recording needs. Furthermore, just like with the other pedals on our list, you can manage and adjust your presets from the provided X-Edit Editor/Librarian software, which is quicker and easier than scrolling through the menus on the unit itself. The DigiTech website has a pretty extensive Tone Library, where you can download and use a bunch of patches.
The Teisco J-1 was a natural maple-topped guitar with a single pickup near the adjustable wooden bridge, a large affair with a metal cover with six slots parallel to the strings and two round bulbs on either side, very space-age! The stop tail was probably rounded, allowing strings to pass through the body, and was covered with a square metal plate. A small pickguard sat between the pickup and the neck. A volume and tone control sat on another little piece of plastic down on the lower treble bout. Knobs were white plastic knurled with a silver ring around the top.
Most guitars will benefit from an annual setup, and instruments that are kept in less than ideal climate conditions (or that are on the road a lot) may need two per year. I’ll evaluate your guitar and make a recommendation. Setups may include truss rod lubrication and adjustment, saddle lowering to adjust action, nut slot adjustments, cleaning of grimy frets and fretboard, lubricating and tightening of tuners, and checking electronics and batteries. Price is based on what your guitar needs. The price range is for labor and does not include parts costs such as strings and bone nut and saddle blanks.
For easy, go-anywhere amplification, start out with a combo guitar amp. These all-in-one units combine the preamp, power amp and speakers into one piece, which makes them ideal for places where you want to set up and tear down in a hurry. Rehearsals and busking are easier with a combo amplifier, and they're great for small venues that don't need the power of a larger amp. The combo is your basic, high-versatility amp, and no guitarist should be without one.
Music Go Round® is a registered trademark of Winmark Corporation based in Minneapolis, MN. Each franchise is independently owned and operated. Other brand names are trademarked or registered by their respective companies. The trademarks and logos used in this website are owned by Winmark Corporation® and any unauthorized use of these trademarks by others is subject to action under federal and state trademark laws.

The Blue Midnight was released in 2011 with a limit to the key of C, also on the less expensive side of the market. It features stainless steel cover plates with a wider back gap for enhanced volume while playing. The unique feature of this harp is the comb, which is made out of translucent blue plastic. The comb allows for brighter tone than the black combed models. It also has a special just intonation (JI) "Chicago tuning". It is also now available in other keys.[23]
Acurious phenomenon that ac-companies certain guitar compa-nies is an inability to translate success from one medium to another. For instance, Martin has never been able to transfer its reputation for high-quality acoustics to electric guitars. And Fender has never been able, on its own, to really succeed in marketing acoustic guitars. Instead, it purchased Guild.
Gitar Tricks are listening (see quote in bold) and as a result I have upgraded my Review Rating of this awesome Online Guitar Training Program. My previous review highlighted problems with the Video Loop Feature and the lack of Speed Control I am so happy that Guitar Tricks have released an immensely improved Video Player with faster video loading time, more accurate and reliable A/B looping and added a Video Timeline Preview that displays thumbnail images of the video at various points as you hover over the timeline. Another feature of the new player is the ability to adjust the speed via the Slow Motion feature.

Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.
Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLO ARM INSTALLATION The tremolo arm can be inserted and removed very easily. Insert the arm into the armhole on the tremolo base plate. Pull up on the arm to remove it. TREMOLO ARM ADJUSTMENT (SAT PRO) To adjust the height of the arm, remove the tremolo spring cover from the back of the guitar, and use a 3 mm Allen wrench to turn the height adjustment screw attached to the bottom of the tremolo block.

Rule 2 - This order is defined by nature and physics. Consider this scenario. You scream and your lungs, mouth shape, and vocal chords define the frequencies that come out. You cup your hands around your mouth to shape the waveform and affect the stereo width. Then your voice goes out into the air and into the Grand Canyon where it bounces around and comes back at you with reverb and delay. If you don't at least follow this fundamental order, you'll be too far out of touch with your listeners and you won't be able to sound acceptable within the mix of a song.

The sounds of the electric guitar made it to outer space. In 1977, both Voyager 1 and Voyager 2 were launched into space with remnants of international life and culture onboard. On each vessel was a gold-plated phonograph record with 115 sounds and images curated by a team led by astronomer Carl Sagan. Along with selections that included the likes of Bach and Beethoven, Sagan decided to throw in – however controversial it was at the time – Johnny B Goode by Chuck Berry, an American rock’n’roll anthem defined by its rollicking electric guitar lick.
I've been playing guitar actively for 40 years. I was looking for a dreadnought cutaway with pre-amp. At this price point there isn't a better made guitar. I would have to spend 2-3 times as much for rosewood back, sides, fret board and saddle for a Taylor or Martin.My first guitar was a Yamaha, so I was happy to find another that took me back. It is aesthetically flawless. I think the Fishman in my Martin Custom X is a tad stronger but I can EQ that; and I love the tuner. If it matters to you, it is made in China. (I thought Yamahas were Japanese).Sounds amazing un-plugged with great bottom end. Very pleased.
The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.
Wiring the phase switch is fairly simple. Solder 2 wires in the criss-cross manner shown in the diagram. In the guitar cavity, unsolder the 2 bridge pickup leads; solder the phase switch "Out" leads to the exact same spot where the pickup leads were; solder the bridge pickup leads to the "From Pickup" terminals on the phase switch. Mount the switch, close up the guitar and start enjoying the new sound you just created!
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back. when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier. i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.

Firstly these are both 'mic-level' or 'instrument-level' inputs (they carry very quiet signals) but hi-Z signals are more prone to interference. The lo-Z signal consists of the instrument's mono signal (hot) and it's inverted waveform (cold), the cables are twisted around one another such that any interfering signal generated in one is negated by the other (much the same as the way a humbucking pickup works).
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
An enduringly popular effect, with all sorts of uses for vocals, drums, guitars and synths, is genuine reverse reverb. This is where a reverb tail appears to increase in volume ahead of the sound that gives rise to it — a completely unnatural sound and something that's impossible to create in real time. It's easy enough to do in a DAW application though. First, find the section of audio you want to treat and reverse it. In the DAW I use, Digital Performer, there's an offline plug-in for this. Now apply conventional reverb to this 'backwards' audio — either by playing it through a reverb plug-in and recording it to another track, or by rendering it using an offline process (if your DAW offers this). In either case make sure you allow enough additional time at the end of the audio to capture the full, final reverb tail. In the screen grab I've done this by allowing 1500 milliseconds of post-roll processing.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it.  Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low!  Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone.  I was so happy and asked him how much, he said it was easy so he didn't want take any money.  But i have him some coffee money and he said it was too much, I said it was for a week and he laughed.  My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems.  Steve is a hidden gem in the Boston guitar world.
The Ibanez Tube Screamer is the industry standard for overdrive pedals. Kicked into legendary status by the late great Stevie Ray Vaughan. The Tube Screamer TS808 was first released in the late 70’s and now catches a small fortune on the vintage market but fortunately there are reissues and many boutique clones out there. The Tube Screamer is not the only overdrive circuit of course, there are many excellent options, it is just clearly the most famous. What makes the TS so cool is the way it interacts with an already overdriven amplifier. It can add a nice amount of gain, sustain, and tonal shaping options. They do provide a bit of a boost in the mid frequencies that many people love as it helps to cut through a band. The list of TS users is extensive but Stevie Ray is the most notable.
Launch price: $1,499 / £1,419 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood/maple (dependent on finish) | Frets: 22 | Pickups: 3x V-Mod Single-Coil Strat | Controls: Volume, neck tone, bridge and middle tone, 5-way selector | Hardware: 2-Point Synchronized vibrato, Fender standard staggered tuners | Left-handed: Yes | Finish: Antique Olive, 3-Color Sunburst, Black, Candy Apple Red, Natural, Olympic White, Sienna Sunburst, Sonic Gray

This is an amazing acoustic guitar for the new generation of guitarists that is quite presentable, especially in stage performances. It comes with a black border and has a free gig cover. The fret board is made from rosewood, which makes it quite easy to handle. It has incredible rigidity, with truss rods on both sides. It produces a considerably high quality of sound and is cost effective with prices ranging from about INR 4,999. This may sometimes be accompanied by free packing and shipping. Find more information on the site link below:
Effects and effects units—stompboxes in particular—have been celebrated by pop and rock musicians in album titles, songs and band names. The Big Muff, a fuzzbox manufactured by Electro-Harmonix,[49] is commemorated by the Depeche Mode song "Big Muff" and the Mudhoney EP Superfuzz Bigmuff. Nine Inch Nails, Pink Floyd, George Harrison, They Might Be Giants and Joy Division are among the many musicians who have referenced effects units in their music.[50]
This is a real nice D-18 it Booms quite nicely with Vintage Tone of that of a much more expensive Big Named guitar for a fraction of what you would pay..its Japanese crafted 29 years ago by the master craftsman in one of the finest Japanese builders factory.. the great Ibanez...the Label inside says... THE MARK OF QUALITY CIMAR Quality Produced under Strict Quality Control by IBANEZ "Made in Japan" Serial # 82110013k ... 1st 2 digits 82 that's the not all Japanese Ibanez old guitars are so great not at all ..many were very low end guitars we saw in the 60's & 70's as a kid myself most were junk or we called them toys.. now that's not true for all of them though I can honestly say that... This is not a cheap guitar nor is it built cheaply ..this example was one of the good impressive one's they used beautiful grade woods on... This particular example it has a Strikingly beautiful straight grained Sitka Spruce Top ... it has ambered nicely now naturally with it's great patina created over the last 29 years . ya don't get that with a new Ibanez or even dare I say Martin with those white looking spruce top "yuck on thanks"... sorry back to this one ... The back sides & neck are all gorgeously grained AA higher grade Mahogany the fingerboard is dark Indian Rosewood with an ebony bridge..even the Original string Pins are aged beautifully amber tipped... I'm lookin pretty hard everywhere and I can not find a crack - separation or a defect to be found anywhere only the most minute microscopic its that clean.... JVG Condition RATED: @ better than average in Excellent used vintage condition wow!..This neck is arrow straight with a perfect medium slim taper neck feels great and action is EZ to play just about perfect...1-11/16ths at the nut very comfortable feel, frets are considered excellent vintage at lest 92%... Comes with a free Chip board case or an optional upgrade to a Hard shell case / ask... Just in.. no pics yet coming very soon stay tuned! Thanks for your interest.
{ "name": "Alpine White", "skuUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar/h82691000001000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 549.00, "formatedIntegerValue": "549", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"36,16,7500006,36 Months Promotional Financing,10/28/2018,0% Interest for 36 months*. 36 equal monthly payments required. Valid through,549.0,false,/pages/Gear-Card-Rewards.gc", "msrp": 915.00, "salePrice": 549.00, "listPrice": 549.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","topSeller","flexibleFinancing","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuH82691000001000", "displaySku": "H82691 000001000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H82691000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Thunderbird Classic-IV PRO Electric Bass Guitar Alpine White", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"4,392", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"397377354900", "restrictionType":"", "restrictionError":"" }
Lastly, but not leastly, Univox offered a super amp head, the C Group, or UX Series, available with either a guitar or bass cabinet. These were promoted with a flyer that sported a muscular black model with naked torso looking for all the world like Isaac Hayes, the man behind the popular movie Shaft. The UX actually consisted of a UX-1501 Amplifier head and either a UX-1516 speaker cabinet for guitar use or a UX-1512 cabinet for bass. The amp was a mean two-channel S.O.B. with blue vinyl and handles. It was set up for lead guitar, bass or PA use, with two guitar inputs, two bass inputs and two mixer inputs. Its 140 watts were obtained with eight tubes – four 6550s, two 12AU7s and two 12AX7s. It had two volume and a master gain controls plus bass, middle, treble and presence controls. Power on and separate standby switches. Four speaker output jacks. The coolest feature was a “tunneling circuit” that allowed, near as we can tell, blending of channels, which meant you could pump up the bass on one and hyper the treble on the other, and combine them. For a little extra punch, you could throw a hi-boost switch, too. The UX-1516 guitar cabinet was a 150-watter. For bass, the UX-1512 was a 200-watt Reflex Speaker Cabinet. Cost for the guitar outfit was $1,400, for the bass outfit $1,450.
Strongly influenced by Stevie Ray Vaughn, Albert King, and Johnny Winter, Garrett is also a longtime fan of Lynyrd Skynyrd’s Allen Collins. Following the path that led Collins to his biting, cutting tone, Bo plays the same type of guitar as the Skynyrd legend, and gets tremendous versatility from his Gibson Firebirds. Incidentally, Winters and King are also notorious Firebird pickers. Bo says that his Firebirds (one of which is a rare collectible) allow him to go from nasty drive flavors to cleaner, Strat-like tones when he needs them.
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved spruce top, back is not carved but is arched by bracing, rosewood back and sides, 5-ply top binding with pearloid outer layer, elevated tortoise pickguard with b/w binding, backstripe of two horizontal lines surrounded by two rows of diag lines (like a Style 45), bound ebony fingferboard, style 45 fingerboard snowflake inlays, trapeze tail piece, vertical "Martin" peghead logo, bound peghead, gold plated parts, sunburst top finish.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: harmony","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Schecter Guitar Research is a company that has really established themselves as one of the best guitar brands out there in recent years. Many of their guitars are focused on the heavy metal market, but players of any genre can find a Schecter that meets their needs. With superb craftsmanship and high-end appointments you’d expect to find on much more expensive guitars, they are also among the best values in the guitar world.

Next up is another electric guitar from Fender Standard, namely the American Special Telecaster. This one has two Texas Special Tele pickups and it’s perfect for great American genres like country, rock and blues. This American Special Telecaster has a lovely alder body and the neck is maple. Just like number one on our list, the 50’s Stratocaster, it’s vintage-looking, but the Vintage Blonde model we’re reviewing looks vintage in a cooler, less sentimental way.

The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
The original electric guitars were hollow. Well, scratch that — the original Electric Spanish guitars were hollow (stick with us for the third installment of “Fundamentals of Guitar Anatomy” on pickups. The first pickup was made for a lap steel guitar!) Gibson took the words Electric Spanish and turned them into an acronym — ES. We commonly refer to these as hollow body guitars.
You don’t have a single Guild in your list, but you have Washburns that totally lack any sort of bass response. In fact, I’ve never understood how Washburn could take perfectly good materials like sitka spruce and mahogany, and produce such inferior guitars. You list the Fender fa-100 and stratacoustic, both firewood as far as I’m concerned, but don’t list the outstanding Alvarez AD60 and AD70, two amazing sounding guitars for the money. The Hohner and Oscar Schmidt OG2 are beginner guitars, but I know a lot of people with Yamaha FG800 and FG830 guitars who would be very offended by you saying one of their favorite guitars is for beginners. They are serious instruments, even if they only carry a sub-$300 price tag. They are certainly better sounding than that Taylor Big Baby thing, which I was shocked to hear at GC. Talk about over-rated. But you did get many things right. You gave the Blueridge d160 high marks, though I think the D140 should have been up there, too. Good to see that you gave the FG800 such high marks, but I actually like the FS800 a little better. It’s easier to play and better for fingerpicking. The Ami, Jim Dandy, and Recording King are all over-rated and over-priced. You need to take the Washburns down and put up the Guild M-120, D-120, and D-150. The D-150 may be the best guitar you can buy for under a grand.
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.

One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.

Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
Why We Liked It - The price on amazon is undoubtedly pretty high, which means that this Gibson is going to be for serious players and professionals only. You'll need to make sure you have gig bags or a guitar case in hand for protection! However, if you’re looking for the absolute best that the electric acoustic market has to offer right now, then there probably aren’t many contenders to the J-200’s crown.
Wow, to work with Johnny Mac! But he makes anything sound better, right? I am not a Stick player (love the instrument though), but I would think with a well-tuned setup, it might actually be easier? I think Tony Levin is running a Kemper now for his Stick. The whole idea isn’t an either/or thing, or which one is better. The idea is “running direct is a thing now, and here’s why.” But no one is taking our amps away. BTW, Bootsy is cray cray.
Buy a kit if you want to make things easier. Several companies produce electric guitar kits that include all of the parts you’ll need, prepared and ready to assemble. If you just want to get your feet wet, these can be a good choice. While you won’t get the full experience of making a guitar from scratch, you’ll still get the satisfaction of putting it together and finishing it yourself.[6]
Read Full Review This electric guitar from Schecter has an awesomely low price for beginners out there with a genre of music in mind is to play rock and lots of heavy metal. The guitar has similarities in design with the Schecter Omen 6 series which is a higher model to the C-1 SGR, but the C-1 SGR also has the humbuckers for its pick-ups controlled by master volume, single tone control and a 3-way toggle to switch between pick-ups to get near on what the higher model can do.
EQ can make a tremendous difference in the sound of your instrument. This becomes especially important when playing in a band setting. Your guitar might sound great played alone, but within the sound mix of a full band may need some tweaking. Depending on which instruments are involved, you will need to adjust EQ to help your guitar fit into the overall sound the rest of the band. Using an EQ effects processor can help you dial that sound in more easily and precisely than depending on just your guitar and amp’s EQ controls.
{"pageName":"[gc] vintage","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Let’s not beat around the bush. The accessories that come with this package (tuner, amp) aren’t the greatest. But they make do. The REAL strength of this package lies solely with the guitar. The guitar is fantastic. Super easy to play (and thus play fast), and to learn on. I’ll explain why that’s important later on. But bottom line, this is a great choice if you want a quick all-in-one package that includes a great guitar.
Effects can be connected via insert points, or the effect send and return loop that is included in most consoles and DAWs (Digital Audio Workstations). When effects are used in the send/return loop, their Mix control should be set to 100 percent wet, so you add back only effected sound to the dry sound, which comes directly through the mixer channel.
ANYBODY, OF EVERY ABILITY, CAN PLAY – Designed for every type of learner, ChordBuddy includes modifications that allow individuals of every ability to successfully learn a new instrument. Perfect for use in the music therapy, home, or school setting, ChordBuddy can help individuals learn to play the guitar flat or with two people at a time, making for what is an all-around therapeutic experience.

Thank you for the post. This explained a lot to me. However, one question I have is that I play lead and when I solo, I need to boost volume. I currently have an Ernie Ball volume pedal but I can never get it to go back to the right spot when I decrease the volume after a solo. I’d much prefer to use stomp box that I can just preset the volume before playing so I have a solo volume, and a strumming volume that matches the other guitar. Do you have any suggestion on what I can do to achieve this since the EB pedal doesn’t seem to work well for me?

Being relatively new to the ABQ area, I've been checking out the local music shops and finding myself underwhelmed - that is until I walked into Grumpy's. Kevin is probably the last honest guy in the business. His pricing is more than fair - whether you're looking for repairs, custom builds, or gear - and he's more than willing to dispense advice or talk shop (not to mention his sense of humor). To put it succinctly; he knows his shit and doesn't blow smoke up one's ass! Sure, the shop doesn't have the "selection" that a place like GC might have, but Kevin can probably get anything you need. (Besides, what's more important - knowledgeable, down-to-earth customer service at a locally owned shop, or being ignored by douchebag wankers who came of age playing along to Miley Cyrus?!) Go to Grumpy's!
Very well cared for electric guitar.  Very light with a good tone provided by the maple neck and mahogany body. The S520EX features a thin, sculpted mahogany body bolted to a maple Wizard II neck with a 22-fret rosewood fingerboard with binding and claw scratch inlays only at the twelfth fret. Components include a pair of Ibanez Infinity covered humbucking pickups and a ZR ball-bearing pivot double locking tremolo bridge with a ZPS2 tuning stabilizer.
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
The 600 series pairs maple back and sides with a spruce top that has gone through Taylor’s torrefaction process, which accelerates the wood’s aging process through heat. We couldn’t find a single fault with this guitar’s build quality and the 612ce is an unbelievably comfortable guitar to play. The tone is still that of a maple guitar, but a more refined one than we’re used to. Likewise with the torrefied spruce: it’s immediately familiar, but with enough difference to cause a cocked ear. Strumming out chords and standard singer-songwriter fare was pleasing, and it put in a good shift with some country-style flat-picking, but it is fingerstyle playing that this guitar lives and breathes. By any token these models from the 600 series are stunning guitars. They have a laudable ecological footprint, they look superb and they have rich, unexpected tonal qualities. 
Now, in the days of solid state signal processing, outboard units are available to produce a facsimile of the old tube-type distortion. Some units actually incorporate a vacuum tube and do it the old way. Other electronics packages simulate the effect. The "tube-type" distortion is preferrable to many over the kind of distortion produced by solid-state amplifiers because the tubes just gradually rounded over the peaks as they went into distortion, whereas the solid state devices just chop off the tops of the peaks cleanly at the supply voltage point, producing a harsh distortion. One type of distortion device, employed as a distortion pedal, was called a "fuzz box".
I too have a similar Alvarez made in Japan, 4 digit model no. etc. Mine is a 5059 autumn heringbone model and there is actually a production date on the tag in the sound hole of 1978. The tag is identical to yours as is the headstock logo inlay. Tuners are different however. Based on the similarities to yours I would date it around the same years, '77-'80. I know the model name due to an Alvarez advertisement clipping that depicts the model I have. I too am getting ready to do some much needed TLC to mine as it has been my most loved acoustic for 20 years now. It was a gift from my mother who used it in a country band way back when. These are great guitars that can be bought very cheaply when you can find them. Good luck with the search!
Now, imagine having that same signal but with your guitar’s volume on its half way setting. That same degraded signal comes out even worse as it only had half of the voltage to work with from the get-go. In order to minimize the amount of signal loss, it is always suggested that the guitar’s volume is kept at its max setting and either manually adjust the output level from the amp or better yet, from a dedicated volume pedal, as is the choice for most professional musicians. A volume pedal in an effects chain will control the output volume of everything that is placed before it, so it’s pretty much almost always a good idea to place it at the end of the chain if it’s going to be your main form of overall volume control.
If you wanted to wire a 4 conductor Dimarzio or Seymour Duncan in this way, just look at the diagram. Solder the 2 "middle wires" together, tape the connection, then solder the outer wires to the output. Be very careful when working with 4 conductor wiring. The colors and polarity are very important. You could easily make a mistake and wire an "out-of-phase" arrangement which would have low output, a squawky, thin sound AND the humbucker would NOT be hum canceling.

Number of Effects: All multi-effects units have a number of effects to choose from; that’s the entire point of them! However, make sure the pedal you go with has plenty of selection that will meet your needs. Typically, the more effects there are to choose from, the better. Chances are over time you’ll narrow the selection down to a few of your favorite ones. The top 5 multi-effects pedals on this list all have plenty of effects to choose from (the lowest has around 40, and a few have 100s).
Wiring the phase switch is fairly simple. Solder 2 wires in the criss-cross manner shown in the diagram. In the guitar cavity, unsolder the 2 bridge pickup leads; solder the phase switch "Out" leads to the exact same spot where the pickup leads were; solder the bridge pickup leads to the "From Pickup" terminals on the phase switch. Mount the switch, close up the guitar and start enjoying the new sound you just created!
I've had my Dorado, model #5986, serial #41 since 1972 and have used it for classical guitar study off and on since getting it as a gift. For what it is, the sound quality and playability are quite good. I'm donating it to a church rummage sale tomorrow (6/3/07) and will remember it fondly. I have an Alvarez Regency, similar to the Dorado, which lacks the sound character.
I wanted the action lowered on two acoustics and a strap button put on. I called 6 different places around town, each one quoting me prices ranging from $50-$60 for the setup (action adjustment) and another $10 for the strap button. I called Franklin Guitar and Repair and was quoted at $25-$30 for the setup and $5 for the strap button. What a steal! So I took both guitars. He looked at one and said all it needed was minor adjustments, which he did right then and there for free. The other, he kept overnight to adjust and add the button. I picked it up today. $15 TOTAL.
{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }