While it can be a troubling task to find the perfect electric guitar to bring out your inner rock star, we hope that our electric guitar reviews & our comprehensive guide has helped you narrow down your choices. Our best piece of advice is to determine the type of genre you’re interested in playing. That will be a good basepoint for you to work from in order to determine the best electric guitar that fits your needs. Afterward, it is important to select the guitar that has the best components to give you the highest quality of sound. The color does not matter too much but the next most important factor to think about is certainly the wood type used to build the electric guitar. Picking the right type of wood is going to more or less, create better or worse sound.
I participated in what I think was perhaps Gibson's best SG...a prototype made for Robbie Krieger. It had my then-patented carbon fiber "T" cross section fingerboard which absolutely took care of the #1 problem with SGs...the rubber neck syndrome. It also had a beautiful flame maple top on the mahogany body and it got a cherry sunburst. Fabulous guitar. Robbie must still have it.
Strings produce sound in the guitar. In electric guitars, because there are no holes, the vibration is passed to a pickup which senses the vibration of the strings passes the signal on to the guitar amplifier. There are two types of strings for electric guitars, light and heavy gauge. Lighter ones are easier to play and allow easy bending of notes, but they are more likely to break and produce less volume. On the other side, heavier ones produce high volume but are hard to play and require more finger pressure to bend notes.
The reason: The dynamic range of music can exceed 60db (power ratio 1:1,000,000). Transients within the music can exceed 20db (power ratio 1:100). Therefore amps under 60Watts and ‘Single Ended Class A’ will not be discussed in this text. Valve amplifiers are used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS systems, audiophile stereo amplifiers, military applications (such as target acquisition and radar) and very high power radio and UHF television transmitters

I use the boss me-8 for 15 years, now with the boss me-25 i have the same kick ass sound plus some more effects and customisations, also it comes with a beutifull surprise that i don't even expect, this guiar pedal is also an audio interfase that suport digital audio via USB, is really amazing you will not regret, it doesn't come whit a power supply only batteries, buy one separatly.


Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
Boost is an effect which boosts the volume of an input signal, in order to assure that the amplifier is driven beyond its regular dynamic range and thus will produce clipping and thereby distortion. Boosts are very useful for tube amp players who wish to increase the gain on their amplifier without having to modify the tone the way a traditional overdrive or fuzz pedal would. A boost is often measured by how transparent it is--although there are some on the market (such as the Katana by Keeley and the EarthTone by NOC3) that employ JFET designs to produce additional "dirt" when engaged to add a subtle fattening effect to the boost.
We love guitars, they are definitely one of the best instruments of all time. What we don’t love is spending crazy amounts of money. We decided to find out what the best electric guitar under 1000 dollars is. Most often when it comes to musical instruments, you can’t expect budget beginners’ instruments to be as good as the best ones that cost ten times as much, but that doesn’t mean that there aren’t bargains to be found. For any skill levels looking for new acoustic guitars click here. If you want the best of both worlds, consider looking at our review of the top acoustic electric guitars.
We have done hundreds of guitar 'set-ups' / repairs / restorations over the years and know how to do them to a degree that 95% of 'players' will be very satisfied. We're not just changing strings and polishing. We'll check and adjust the neck for correct string height at the 7th fret (should typically be about the thickness of a .010 gauge 'E' string when fretted at the first fret and the 12th fret). We also check for a 'body bump' in the neck as if that can't be addressed to a 'playable' degree, then the balance of the adjustments will be for naught. As we're in a very dry climate, we will check for 'fret overhang' due to neck shrinkage and 're-dress' the frets accordingly. If it's a 'bolt-on' neck, we'll check for neck joint / screw integrity and repair as necessary. We check and adjust for correct intonation using our 'Peterson' strobe tuner and our other 'analog' tuner. Electrics are typically intonated with 'fresh', .010 strings installed (if you want it intonated with a different gauge, just let us know). We inspect and test the electronics, especially looking for any 'aftermarket' re-wiring / mods / incorrect repairs. We inspect the integrity of the tuning machines and repair as necessary. Of course we do all the standard cleaning, adjusting and test playing once the 'basic integrity' of the instrument has been addressed.
This is one of the most frustrating questions from the MIJ collector. As I've read many different guitar collector/enthusiast forums and spoken to local guitar dealers, it's clear that the layperson has little to no idea who made their badged guitar from the 1960-1980 period, also known as the MIJ golden age of guitar manufacturing. People often make the mistake of citing the American or European importer as the 'maker' of the guitar, when in fact several Japanese manufacturers were producing badged guitars out of their plants and shipping them to America and Europe to sell. Japanese manufacturers made multiple badges at the same plant, many of whom resemble each other closely. Some manufacturers merged or changed hands over the years which added to the confusion, sometime merging with another maker, only to pick up their name later. In some cases a manufacturer would farm out production to various manufacturers, making it still more difficult to know who made the guitar in your hands. Parts from other guitars would be used in the making of a particular badge for a period of time because it was all the manufacturer had to hand...which doesn't always help in identifying a maker. And sometimes, the guitar which is supposed to be an MIJ guitar is actually made elsewhere (Korea, Indonesia) because production was moved during this period in history. Sounds hopeless, right? Not always!
The written history of the classical guitar can be traced back to the early 16th century with the development of the vihuela in Spain. While the lute was then becoming popular in other parts of Europe, the Spaniards did not take to it well because of its association with the Moors.[citation needed] Instead, the lute-like vihuela appeared with two more strings that gave it more range and complexity. In its most developed form, the vihuela was a guitar-like instrument with six double strings made of gut, tuned like a modern classical guitar with the exception of the third string, which was tuned half a step lower. It has a high sound and is rather large to hold. Few have survived and most of what is known today comes from diagrams and paintings.
Whatever budget you’re on, you will always be able to find a suitable guitar. Even in the $100 price range you can find some models that play nicely. However, in that super-budget market there is a lot of garbage, so be careful. There’s a difference between ‘affordable’ and ‘cheap’, so do your research before buying something that may offer no value.
After you've made your selections from the best selection of guitar and bass tabs, you'll want to download the Musicnotes.com apps for your Android, iPad, iPhone, or other device to gain access to your digital library anywhere. The option to print the file is still available, and you will also have all of your sheet music stored in your personal account to access your digital file from any computer or mobile device. If any issues arise, make sure to contact our customer support of musicians, ready to help fellow musicians.
Unlike distortion or overdrive, fuzz is meant to not sound like an amp at all. It is meant to add harmonic content and transistor-like goodness to your tone. Fuzz boxes were used extensively in the 1960s to create an over the top distortion sound. Many times fuzzes will completely change the sound of your amp, so be careful and really focus on buying one that has the sonic makeup you are looking for. Hendrix, Cream-era Clapton, and Dan Auerbach are well known fuzz users.
Having lived in an apartment when learning guitar, it was painful. Using headphones works, but most days you just want to hear it from an amp like it was meant to be. Your only real solution is to try out some of those tiny lunchbox amps and see if they can fill that void. Another option is to start saving for a house, or find a friend who has one to jam out in.
I am a fan of inexpensive guitars. Why but something so valuable you can’t take it out or afraid it will get damaged. Get an inexpensive guitar that is closest to the expensive ones you desire. Basically the construction and woods are the same just made inexpensively to sell to the masses. Watch who plays the secondary brands and get full cred. I have a squire cabronita, squire telecaster with upgraded coil tapped humbucker/single coil pickups, gretch electromatic single cutaway soildbody, and 2 Harley Benton les pau l type guitars with p90s and coil tapped tumblers for less than 175.00 each. Every guitar is a beauty and a joy to own.
When I was a kid in the 60s, all of the Japanese brands (probably ALL made by Teisco) had a really bad rap and only kids ended up with them. Some were very cheaply made, with weak metal, thin chrome plating, funky finishes and thin pickups. I owned a Rodeo, which was terrible. But then, who knew much about guitars then? Nowdays, anything has character.
Invented in 1931, the amplified electric guitar was adopted by jazz guitar players, who wanted to play single-note guitar solos in large big band ensembles. Early proponents of the electric guitar on record include Les Paul, Lonnie Johnson, Sister Rosetta Tharpe, T-Bone Walker, and Charlie Christian. During the 1950s and 1960s, the electric guitar became the most important instrument in popular music.[1] It has evolved into an instrument that is capable of a multitude of sounds and styles in genres ranging from pop and rock to country music, blues and jazz. It served as a major component in the development of electric blues, rock and roll, rock music, heavy metal music and many other genres of music.
Read Full Review It’s amazing to see a company that excels in all the products and services they offer, while other companies are struggling and scratching their heads to find a way to break through in the market. The best example of such success on Yamaha is with their long line of guitars and two of those guitars they have are considered by many is best for beginners. The guitars I’m taking about is the Pacifica Series PAC112 together with the PA012 featured here, which is also available on a guitar package.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at jvguitars@gmail.com .
This is our top pick for the best dreadnought guitar under $500. It has the looks of something you’d see in a honky tonk bar. It is a really cool looking acoustic guitar. It is a classic with it’s sunburst color and decorated hummingbird pick guard. It is the more affordable version of the Gibson Hummingbird. It has a solid spruce top with mahogany back and sides. It also has a pickup so you can amplify it for gigs. Owners describe it as having a big sound with great playability. Nice low action will make playing much easier. The tapered neck is great for beginners and makes forming chords less difficult. See more pictures of this guitar here.
The AF75 also has an ART-1 bridge and a VT60 tailpiece for increased resonance, improved tuning stability, greater sustain and an enhanced tone. It is also equipped with Classic Elite humbucking pickups at the neck and bridge, producing a rich and nuanced tone with just the right low-end heft. Tone shaping is an easy affair with the Sure Grip III control knobs, which are designed for non-slip, precise control.
The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.

Overdrive and distortion are effects that introduce harmonics to your guitar tone by pushing more volume into a circuit until it can’t handle it anymore and starts to break up. The types of sounds you can get from an overdrive or distortion range from a light boost to a full on metal crunch. Overdrive and distortion effects are great when placed after a compressor but before any of your other effects.


Gut strings were the original strings for the classical stylist.  They were literally made from the guts of farm animals, mostly sheep.  The intestines and the process used to make these strings became more expensive than nylon and thus have fallen out of favor.  Even though you may hear the term “cat gut” strings, this style of string was never made from the innards of our cute, cuddly, feline friends… just the beasts we like tend to use as a food source.

The VOX Pathfinder 10 is one of the best cheap amps on the market today, but don’t be fooled by its budget friendly price tag – this is a powerhouse of tone. Its pricing and ease of use makes it ideal for beginner guitarists but its signature, high quality VOX sound is why it’s also relied upon by professional guitarists and studio engineers everywhere.

This comprehensive set contains the most detailed version of the Yamaha C5 Grand plus a full compliment of performance sounds to cover all your needs from pads, strings, EPs, orchestra, synth, organs, guitars and many other instruments. At 971mb in size (with 592mb dedicated to one outstanding piano with five brightness levels to choose from)  it is designed for the fussy pianist who also wants a full bank of sounds at their fingertips.

ACTION DEL BRACCIO È possibile regolare l'action del braccio del tremolo utilizzando una chiave a brugola da 3,0 mm sulla vite (B) del tremolo. ACCORDATURA DI PRECISIONE Dopo aver fissato il bloccacorde, utilizzare gli accordatori di precisione per eseguire le regolazioni di precisione dell'accordatura di ogni corda. Regolare tutti gli accordatori (C) al centro della rispettiva corsa prima di fissare il bloccacorde.
This is easily the best multi effects pedal for metal, especially if you need an easy to use option with just the essentials packed in. Within the Valeton Dapper Dark Effect Strip, you have a built-in tuner, Higain effect designed for brutal distortion sounds, a lush Chorus to bring out those riffs and add more weight to your sound as well as a Delay effect with tap tempo to allow you to add everything from slap-back delay to long, drawn out echoes. Best of all you have a Boost pedal which throws in +12 dB of gain so you can stand out from the mix when you kick in to a solo or need a certain riff to really jump out.

To be able to buy a name brand guitar like this at such a great price was a real steal. One of my sons is a beginner learning to play, so it was great for me being able to purchase a guitar like this that would carry him from beginner into an intermediate player in later years. It is a well-made and beautiful guitar, and it produces a wonderful sound that you would expect from a name like Fender. Plus, with my son being left-handed, I thought it would be difficult to find a good affordable left-handed guitar for him. Not only was able to find this high quality one, but the price couldn't be beat.

The Triple Crown TC-50 is a three-channel amp, with independent preamps covering clean, low-gain and high-gain ranges. The front panel packs three identical sets of controls including gain, master volume, bass, mid, treble and presence, together with a two-way toggle switch that changes the channel gain and voice. There’s a small toggle switch for manual channel changing, and a pair of master output level controls, one of which is footswitchable. The feature-rich rear panel includes Mesa’s exceptional CabClone speaker-emulated output, with a balanced XLR, headphones socket and line out. The TC-50 also benefits from a footswitchable effects loop, separate reverb level controls for each channel, and MIDI switching for all the major functions. The Triple Crown’s clean channel is highly versatile, going from butter-sweet clarity through to edgy blues soloing, with a lot of control over that ‘just on the edge’ sweet spot. The Lo Gain channel is where the TC-50’s crunch and classic rock tones live, with a multi-layered overdrive and harmonic overtones that shift with varying degrees of pick attack. Flipping the toggle switch into Drive mode adds a subtle midrange bump, invoking JCM800-approved snarl and a dose of extra gain. The Hi Gain channel adds more of the same - lots more, so much so that in the upper reaches we think this is probably the most gain ever from a Mesa amp. No doubt about it, the Triple Crown has three channels packed full of world-class tone that only a handful of amps can compete with.
In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.
The first “real” guitar I ever bought for myself as a teenager was an Ibanez RG much like this one, and I played that guitar for almost 10 years before buying yet another Ibanez RG. Note that this model does not have a tremolo, which means great tuning stability and fewer headaches when it comes to changing strings, tuning, and setup. However, you won’t be able to perform any crazy whammy tricks, so be sure you’re okay with that. Mahogany body, two hot humbuckers, jumbo frets, and an ultra-stable 3-piece maple neck. Hard to beat at this price point. Love it.
I always recommend the Cordoba C5 for beginners who are looking for their first classical or nylon string guitar. It’s comes at a very wallet-friendly price, but it sounds and plays exceptionally well for a guitar in its price range. More experienced players can look to other C-Series Cordoba guitars like the C12, which is built for advanced guitarists.
The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise.

An instant classic, and an easy guitar song that offers a simple, repeated section of just a handful of dyads, or two-note chords. It is one of the most recognizable guitar riffs of all time and it’s great for beginners to learn. The entire section is played with just two notes per chord, and it’s a progression that keeps your fretting hand in just a single section of the neck. Once you learn this riff, it’ll be tough to stop, since it sounds so good, and it’s easy to play. 


Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.
When Martin turned to jobbers rather than direct sales, more variation in cases took place. Depending on what part of the country you bought your Martin, the jobber would supply a similar range of cases - chipboard, hardshell, or deluxe hardshell, from the case manufacturer of their choice. So cases on old Martins can vary greatly. This changed in 1972 with the blue thermoplastic case which was included with the sale of all new Martins.
Decide between an active and passive DI. The most obvious difference between the two is that an active DI requires a power supply for you to operate, while passive DIs do not. Beyond that, due to differences in design, each of these has strong suits that should be taken into consideration. For example, the transformers used in passive DIs are more resistant to the hum created by ground loops, making these ideal for on-stage performing.[8][9] Additionally:

Sie sind so viele tolle bild listen das auf kann werden Ihre motivation und informativ zweck vonJaguar Guitar Kit design-Ideen allein sammlungen. wir hoffen sie sind alle genießen und zuletzt kann finden der beste bau aus unserer sammlung veröffentlicht hier und auch für ideal bedürfnisse für den persönlichen gebrauch. team auch liefert die bild ein TOP QUALITÄT Auflösung (HD bildauflösung) das kann sein heruntergeladen durch einfach Weg.
Why We Liked It - Even if this isn’t the cheapest guitar on our list, we think the Schecter Hellraiser is the best bargain! To get this much guitar for so little money is almost incomprehensible and we feel like a million bucks when we play it! It not only looks good, it sounds fantastic, and you can be sure to impress everyone who hears you play with this wonderful instrument!
The Teisco TG-54 was a two-pickup Les Paul, named for the year it was designed, 1954, not long after the original! It had a large white plastic covered pickup at the neck, set into the pickguard, and a slanted metal-covered pickup set into a metal tailpiece assembly, sort of like a Telecaster. Again, strings passed through the tail assembly and the body. Similar to the J-1, the volume and tone controls (same knobs) sat on a small rectangular plate, this time metal like a Tele, with an added chicken-beak three-way rotary selector switch.


{"pageName":"[gc] pdp: ibanez s421 s series solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114572014;;;;evar65=Used-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.

Let's face it: Big, high-powered guitar amplifiers full of sizzling tubes capable of frying an omelet are fun, and the sound of an electric guitar playing through one has been pervasive in popular music since the 1960's. They're sometimes very loud as well, and sustaining the volume levels required whilst attaining those majestic, exotic or extreme guitar tones for any appreciable length of playing time in one's house or apartment without interruption from family, neighbors or the police is generally impossible. Don't fret over it. We'll discuss a variety of solutions for the volume problem later on.
Hopefully, that explains the basic components and tools. As mentioned guitar electronics can be a little daunting and my best advice if new to guitar electronics is to avoid seeking out information on guitar related forums as you may leave your head spinning, feeling more daunted than you did in the first place. We will cover the basics here and in most cases that will be more than enough to help you put together a great guitar.

As these same makers ramped up for digital production, digital choruses naturally joined the team. The effect as produced digitally might sound broadly similar, but it is done differently than in the analog circuits. Digital chorus pedals double a signal and add delay and pitch modulation to one path, the latter wobbling below and above the pitch of the unadulterated signal, which produces an audible out-of-tuneness when the paths are blended back together. It’s hard to fault the power and range of control that digital technology affords, and this version of the effect has been hugely successful, but many guitarists still prefer the subtle, watery shimmer of the analog version. Conversely, the same ears often find the digital variety makes them a little queasy.
Beginners face this very common problem when they go for the cheaper options. The strings are usually far from the fret board, and due to lack of knowledge, many think that this is how it was meant to be. Such a guitar brings pain to the fingers since force has to be applied to lower the string to the fret board so as to produce sound. All these difficulties make it very hard for a beginner to learn the guitar. For you to learn the guitar quickly and without problems, you should get a guitar whose distance from string to fret is less.
At the other end of the size extreme sits a shape called the parlour. Parlour acoustics are among the smallest in body size you can buy – not counting the modern ‘baby’ guitars – and are typically favoured by players of more low-key, less brash musical styles like folk and indie. Once again, the guitar’s distinctive shrunken body shape is another invention from the CF Martin guitar house, with the guitar’s neck typically joining the body around the 12th fret.
Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.
The Omen-6 is a stripped down take on the Hellraiser, with the same sleek double cutaway design and HH (dual humbucker) configuration, but at a more affordable price point. But what's good about it is how Schecter is able to maintain the premium look and attention to detail at this lower price point, including the carved top design. While the name again implies something evil, this guitar is quite good for the price.
This is a great local shop.  I bought a new Floyd Rose bridge for one of my electric guitars and brought it to Franklin Guitar to be installed and set up.  I got the guitar back within 2 days and it plays so well that I brought them my other guitar for a set up the next day.  Again, within 2 days I had it back and it plays exactly like the other one...awesome.  I had both guitars set up for a little more than half of what another shop quoted me just to install and set up the new bridge on the one.  High quality work at a fair price in a reasonable time...I won't go any where else to have my guitars worked on.  They also have a good inventory of guitars and amps for sale to fit any budget.

Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping ESP LTD KH602 Kirk Hammett Signature Electric Guitar   New from$899.00In Stockor 12 payments of $74.92 FREE 2-DAY SHIPPING PRS Paul Reed Smith SE Zach Myers Semi-Hollowbody Electric Guitar   New from$779.00In Stockor 12 payments of $64.92 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String   New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING See All Signature Model Electric Guitars
Generic PC audio cards often don’t have ASIO drivers. However, there is a freeware thing called ASIO4ALL - Universal ASIO Driver that can turn some of the low-level game friendly Windows audio interfaces (WDM streaming) into an ASIO driver, which is better than nothing. So if you’re going to start with your guitar going direct to the PC sound card, get this next.
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
It can get a bit difficult trying to properly depict certain aspects of effects pedals to our newer musicians out there since much of music tends to be described in an intangible sort of manner which relies heavily the assumption of prior knowledge and personal tastes which is why we try our best to not get the pros out there the meat of the information they are looking for, but describe it in a way that players of even entry levels can comprehend. So with that in mind, one of the more complex aspects of effects pedals for newer musicians is their implementation of a signal chain.
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.

The Ace Frehley (KISS) signature model, released in 1997 and re-released in 2012, has three humbucking DiMarzio pick-ups, a cherry sunburst finish (AAAA), a color image of Frehley’s face in his Kiss make-up on the headstock, and mother-of-pearl lightning bolt inlays, and Ace’s simulated signature on the 12th fret. There was a limited edition, Gibson Custom Shop run of only 300 guitars that were built with DiMarzio PAF, Super Distortion, and Dual Sound pickups. The production run model was only built with DiMarzio Super Distortion pickups. This was one of Gibson’s best selling artist runs. These guitars are now valued at between $US4,000–12,000.[citation needed]The more recent 2012 “Budokan” model features mother-of-pearl block inlays (no signature at the 12th fret), a Richlite fingerboard, Grover machine heads with pearloid banjo buttons, and a grade A maple top.[44]
The Hummingbird Pro's unique look breaks the typical monotonous appearance of conventional acoustics, and it does so without straying too far from the familiar. It is easily identifiable by its uniquely shaped ornate pickguard, which matches the guitar's faded cherry sunburst finish. Whether you are on stage or just jamming with friends, you can be sure that this acoustic will stand out.

The first thing to do is to cut out a piece of copper foil slightly larger than the bottom of the electronics cavity.This way the edges of the foil will go up the sides of the electronics cavity a bit. Next cut out strips of copper foil slightly wider than the depth of the cavity, and form them along the sides. When you are finished, it should look like the photo on the left.
The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.
Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
Manufacturing techniques can alter the impact of the variability of other factors. A .strandberg* guitar is made from lightweight but stiff materials. The neck is reinforced with carbon fiber. Each string rests on its own bridge that does not transfer vibrations to the other strings in the same way as a conventional guitar bridge. The bridges themselves are made from light and stiff aircraft aluminium instead of brass or steel as is commonplace. Each component is tightly coupled to the next with no room to vibrate. Regardless of tonewood, your .strandberg* will sound clear, airy, organic, dynamic, and respond quickly to the plucking of strings with a great dynamic range – as a result of the construction itself. The characteristics of different woods and pickups are transferred more effectively than might otherwise be the case. Is this better? Again, it depends on what the musician is after… I’ve come across for example ES-335 players that are intimidated by the responsiveness and dynamics and who become inhibited and self conscious when picking up a .strandberg*. But for most, it’s a pleasant experience that liberates their tone.
The BOSS ME-80 gives you all of the effects needed to create that elusive signature tone. The multi-effects unit is a great way to learn how different effects interact with each other to provide you with crystal-clear tones to fuzzy, thick walls-of-noise. If you have an ME-80, download BOSS Tone Studio for an easy way to experiment and learn these effects, have fun and use your ears to build your best guitar sound.
A typical digital multi-effects pedal is programmed, with several memory locations available to save custom user settings. Many lack the front-panel knobs of analog devices, using buttons instead to program various effect parameters. Multi-effects devices continue to evolve, some gaining MIDI or USB interfaces to aid in programming. Examples include:
as cool as it sounds to say that robert johnson has influenced everyone since him, directly or indirectly, is just nonsense. sure he was a legend in his own right; but a lot of that has to do with his life being shrouded in mystery. yes, he has influenced some players, way back when, but there were so many more players influenced by electric blues; chicago and texas blues, not delta blues. i understand he was somewhat of an innovator, and that is very important, but i think so called ‘music critics’ have over-blown it a bit in the reverence department for fear of being labeled un-hip. dave marsh, the ‘rolling stone’ critic is a perfect example. he claims johnson as one of the most gifted players of all time. but he dislikes david lee roth, singer in ‘van halen’, so right away edward van halen, guitarist in that group is marginalized with: “the basic 12 bar-blues on the louie-louie thump theme” to describe his playing. lol. to sum it up, whenever a critic uses the phrase ’12 bar blues’, you can pretty much assume he has no clue about what he talking about….best wishes.
I was lucky. Went into to a small local music store and they had it for a long time and were trying to get rid of it quick. Got it for about $800. The previous Rick 12 I had (with narrow neck) I bought for $400, fixed broken nut, then sold to West LA Music for $750 cash so I could get the Petty model. Transactions that were definitely worth it at the time.
This is a very rounded sounding electro-acoustic bass. Recorded straight without a mic, so there is no noise. This fits nicely with most types of music. Its deep but not overpowering, leaving room for other instruments. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix somewhere between the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
I have $100 guitars that play and sound great. I have $15,000 guitars that play and sound great. That said, a great middle of the road guitar that won't break the bank is an Epiphone Masterbilt. I find them to sound remarkable AND play great, ESPECIALLY for the money. I like buying guitars used and save about half from the retailers. A good used Masterbilt will cost about $300 on Ebay or Craigslist.

The best course of action is to set a budget that is reasonable - right at the get go - while also considering the cost for other important gear like accessories, cables, amplifiers and effects, should you need them. A good rule of thumb to follow is that entry-level to mid-tier instruments are great for beginners, while more experienced players will want mid-tier to premium guitars.


With that in mind, we would like to preface this article with the statement that a certain body style doesn’t necessarily mean that the guitar will be a good fit for the genre it’s associated with. However, we have also included some info on pickups. With knowledge on how the combination of pickups and a guitar’s body style impacts your end tone you should be ready to start shopping!


Adding effects at the mixing stage gives the engineer greater creative flexibility, but if the guitarist needs to hear the effects to play, then you may get a better artistic performance by recording them with the take. All I'd say on this point is that editing is much more difficult if the sound is recorded with delay or reverb, so an alternative is not to record these effects initially, but still add them to the monitor mix for the player's benefit during performance. Effects like chorus and wah-wah can be recorded straight off, if required, as they don't affect the ease with which a part can be edited. Ultimately, the performance is what really counts, so compromise in favour of the player's artistic needs rather than your technical needs where a choice has to be made.
if you wish to use your computer as an "effects pedal", I recommend IK Multimedia's Amplitube 3 - it has an extensive array of effects and amplifiers with all kinds of crazy and fun tones to mess around with. Theres a ton of effects, so I recommend you check it out. It is a bit pricey though ($199 for the standard edition). If I were you, I would download the Amplitube CustomShop, which is basically a free demo version of the full software.

There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]


This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.
Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: JVGuitars@gmail.com .
In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.
The question is, does koa do anything for the sound, or is it just for the esthetics? The material in instruments always affects the tone, and koa makes the tone brighter while still being deep and satisfying. Sound is always hard to describe in words, because we experience sound differently, but if you’re curious about what it sounds like, just check it out on YouTube.
Let’s start with body style. This is quite simply the shape of the guitar’s body, and there are potentially a lot of them to consider. As a general rule, the larger the body, the more resonant it will be, giving it a deeper, richer tone. This is clear for things like the hummingbird, with the big square shoulders, and the dreadnought style body, which is generally the largest body type you’ll encounter. The drawback of larger bodies of course is that they’re more cumbersome and less ergonomic to play.
A common misconception of the Lyle brand, among others, was that Norlin sued Matsumoku for copying their designs and shut them down. The actual lawsuit was indeed filed by Norlin, only not against Matsumoku but Elger/Hoshino--the American division of Ibanez--over elements of the Les Paul and SG guitar designs that Norlin/Gibson had since claimed as a trademark. The case was eventually settled out of court. Japanese companies preemptively altered the designs of their guitars in such a way that they would not be "exact" copies of Gibson guitars. The true story of the demise of the Lyle brand is largely unknown to this day.
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton
The early rock bands of the 1960s used the PA system only for vocals. The electric guitarist and electric bassist had to produce their sound for the hall, club or other venue with their own amplifiers and speaker cabinets. As a result, bass players from the 1960s often used large, powerful amplifiers and large speaker cabinets. Some bass players would even use multiple bass amplifiers, with the signal from one bass amp being sent to one or more "slave" amps. In the mid-1960s John Entwistle, the bassist for The Who, was one of the first major players to make use of Marshall stacks. At a time when most bands used 50 to 100-watt amplifiers with single cabinets, Entwistle used twin stacks with new experimental prototype 200-watt amplifiers. This, in turn, also had a strong influence on the band's contemporaries at the time, with Jack Bruce of Cream and Noel Redding of the Jimi Hendrix Experience both following suit.

Let’s start with body style. This is quite simply the shape of the guitar’s body, and there are potentially a lot of them to consider. As a general rule, the larger the body, the more resonant it will be, giving it a deeper, richer tone. This is clear for things like the hummingbird, with the big square shoulders, and the dreadnought style body, which is generally the largest body type you’ll encounter. The drawback of larger bodies of course is that they’re more cumbersome and less ergonomic to play.


Let's now look at two real-life examples of what this would look like with a realistic setup. Our first example will be a linear sequence without an effects loop, while the second will use an amplifier effects loop. It should be noted that many pedals themselves can host their own effects loop, so how you set it up is up to you. It functions the same either way.
hi-thanks joe -i have  installed a push pull pot to get middle and neck and all three pickups totegher-it works prefect but when not pulled it has seemed to change the sound on my normal five  selector sound and made all my normal five sounds very twangy-is this normal as when i pull the push pull pot up the extra sounds get clearer-is it becuase i have two tone caps on the push pull one on top half and one on the bottom but i thought that should not matter when the tone is at 10-thanks sean
OCTAVACIÓN (FAT20) Cada una de las silletas está provista de un tornillo de bloqueo para impedir todo movimiento. Para ajustar la octavación, afloje el tornillo de bloqueo de la silleta con una llave Allen de 2 mm. (D) Para ajustar la octavación, introduzca una llave Allen de 2,5 mm en el tornillo de la silleta situado en la parte posterior del trémolo.
An utterly odd topic would be a discussion of woods for a certain tone. Wood does no magic to the tone. It has properties which might change the resonant behavior of a guitar body. But, that it does by some very course parameters, say stiffness and specific weight. Of very same importance is the shape of the plank which is referred to as “the body”. Stiffness, weight and shape work all together.
Tube enthusiasts believe that tube amps produce a "warmer" sound and a more natural "overdrive" sound. Typically, tube amps use one or more dual triodes in the preamplifier section to provide sufficient voltage gain to offset tone control losses and drive the power amplifier section. While tube technology is, in many ways, outdated, tube amps remain popular since many guitarists prefer their sound.[15]
Subsequent years brought new company ownership to the Gibson Guitar Company. During the “Norlin Era“, Gibson Les Paul body designs were greatly altered, most notably, the change to the neck volute. Because the Les Paul had the reputation of having an easily broken neck joint, the volute strengthened the neck where it joined the headstock to avert breakage. To further increase the strength, the neck woods were changed from mahogany to a three-piece maple design. The LP body was changed from a one-piece mahogany with a maple top into multiple slabs of mahogany with multiple pieced maple tops. This is referred to as “multipiece” construction, and sometimes incorrectly referred to as a “pancake” body. The expression “pancake body” actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The “pancake”-like layers are clearly visible when looking at the edge of the guitar. This process is also known as “crossbanding”, and was done for strength and resistance to cupping/warping. Crossbanding was phased out by 1977.
In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
Three and one half steps down from Drop D. Used by Darkest Hour on the song "Wasteland", Attack Attack!, Baroness (on their first two EPs), The Acacia Strain (on some songs), Dead by April (on some songs) and In Flames (on the song "Transparent" from Reroute to Remain). Chelsea Grin also used this tuning on their album Ashes to Ashes. Also Pantera and Whitechapel recorded Sandblasted Skin in G-g-C-F-A-D, Drop G variation with D standard.
Speaking of tiny little helpers that could fit anyone, let me introduce to another seemingly impossible amalgamation of great sound and great look. The Line 6 Micro Spider 6-Watt Battery Powered guitar amplifier has a whole lot of qualities that make it the favorite small amplifier of so many musicians who are constantly on the go or don’t have too much space. With its small form and light body it can be easily transported anywhere you go, while its battery negates the need to be constantly plugged into an outlet and hoping that you have some kind of source of energy. The best part of the amp is of course the sound of the guitar, which is quite outstanding for the price it is offered up at. One of the best options of small guitar amplifiers available for you that I want you to remember when you start attempting to make a decision on buying one. Great stuff to have, really.
Yet you’d never find a punk rocker who didn’t want to be just like him. Whereas most punk guitarists found inspiration from the same hard rock and proto-metal players that they pretended to despise, Strummer was influenced by reggae, rockabilly, soul, ska and even early New York rap music when most of the world still hadn’t heard of the Sugarhill Gang.
"That great Gretsch sound!" is the slogan of the company founded by Friedrich Gretsch in 1883. The company belongs to the oldest electric guitar manufacturers in the world. They created legendary archtop guitars, with or without Bigsby tremolo, like the White Falcon, the Country Club or the 6120 Chet Atkins. The rock 'n' roll boom in the 1950's allowed the brand to become a reference thanks to artists like Eddie Cochran or Bo Diddley. George Harrison ─ who bought a Duo Jet, a Tennessean and a Country Gentleman ─ became the brand's most famous endorser in the 1960's and put the brand under the spotlights once again. In 1967, Fred Gretsch Jr. sold the company to the Baldwin Piano Company and Gretsch started its twilight until it halted all production in 1981. Another Fred Gretsch (the nephew), bought the company back in 1989 and decided to open facilities in Japan and the USA to manufacture expensive products. Brian Setzer and his neo-rockabilly allowed the brand to rise again in popularity in the 1990's until Fender bought the company in 2002. Ever since, the manufacturing quality of the guitars has increased considerably and Gretsch is now back again as a major player in the guitar market.

If you are trying to find the best electric guitar for beginners but you lack the time to do the necessary research in order to find a quality product, this short introduction should help you out. After reading plenty of electric guitar reviews and after comparing top-notch products, we have reached the conclusion that Epiphone Les Paul STANDARD is the model that you should have in mind. This device has a beautiful mahogany body and a maple top that is said to deliver an easy to distinguish classic tone. As a plus, the model comes outfitted with Alnico Classic humbucker pickups that secure a subtle and warm tone. If the Epiphone Les Paul STANDARD is out of stock, we recommend that you check out the Epiphone Les Paul STANDARD Electric as it is a reliable alternative that you might equally enjoy.


I agree to receive these communications from SourceForge.net. I understand that I can withdraw my consent at anytime. Please refer to our Terms of Use and Privacy Policy or Contact Us for more details. I agree to receive these communications from SourceForge.net via the means indicated above. I understand that I can withdraw my consent at anytime. Please refer to our Terms of Use and Privacy Policy or Contact Us for more details.
If you want to spring for a pedalboard and processor combo that offers multiple effects in one unit, you might want to check out something like the HeadRush Pedalboard with Guitar Amplifier and Effects Modeling Processor. It offers 33 amplifier models, 15 cabinet models, 10 microphone models, 42 effects, and includes an expression pedal, 7" touchscreen, 12 foot switches with OLED Screens, and more.
Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.
Fuzz bass effects are sometimes created for bass by using fuzzbox effects designed for electric guitars. Fuzzboxes boost and clip the signal sufficiently to turn a standard sine wave input into what is effectively a square wave output, giving a much more distorted and synthetic sound than a standard distortion or overdrive. Paul McCartney of The Beatles used fuzz bass on "Think for Yourself" in the 1966 album "Rubber Soul"
"Of course using effects pedals isn't cheating. I personally would define cheating as using corrective technology of some sort to falsify an artist's performance/musical ability, and I don't think that's what using pedals do. They're used for creative purposes, to manipulate sounds for artistic effect and suit personal tastes/whatever suits the mood of a song. They expand the range of timbres you can get from only using one instrument.

We also decided to test a separate group of smaller guitars with scale lengths (the distance from the string nut at the top of the neck to the bridge that supports the strings on the body) in the range of 22 inches, as compared with 24.75 to 25.5 inches for most full-size electric guitars. These models may be more comfortable for kids because their smaller hands won’t have to stretch as far, and many adults also like them because their compact size makes them easier to travel with.
{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site1prodL20582","sku_rep_id":"site1skuL20582000001000"},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
1) The tuning keys (machine heads) are as bad as it gets and if you're planning on keeping this guitar for a while and making it really workable plan on changing them ASAP and throwing the others away as far as you can throw them - Shame on you Yamaha, you could have at least used some half decent tuners!! These are an insult to your good name. So I replaced mine with Grover Sta-Tite V97-18NA (with brass colored gear) which are the best tuners "for the money" ($40) for any guitar especially for this one. However, be aware that you will also need to replace the Yamaha bushings because the I.D. is too small for the Grover post and, unfortunately,the Grover bushing O.D. is too small for the holes in the Yamaha headstock. The correct bushing that will allow an easy proper fit of the Grover tuning pegs to the Yamaha APXT2 is Kluson MBG65N or B bushings (Google it). If you elect to do this instead of letting your friendly Luthier do it, be advised that when you knock out the stock Yamaha bushings, since they're press fit it may have a tendency to split the wood on the top of the headstock. This one modification will bring this guitar from the level of a toy trying to be a serious contender to the best little guitar that money can buy.
Firs, I'm a tube guy - 68 Vibro Champ, 57 Deluxe, Falcon. Next, I have hand wired boutique pedals. And C, I have owned previous Zoom iterations of this pedal, my favorite is the MS100 BT. With all that said this unit is awesome!! It's all metal and a solid build. The onboard tuner is easy to get to and has more options than I expected. I love that it is stereo out and has an aux in for my iPhone backing tracks. Now the sound - the word is the started from the ground up on modeling amps, cabs and effects. I can tell you the rocks my sox. Whether I'm going through it with my SG or my Les Paul this thing screams. From trippy ambient delays and reverb to 50's rock. The acoustic guitar tones are very convincing. All this for $200 is a steal. I would ... full review

The first successful guitar pickup was developed in the early 1930’s by Rickenbacker® to help amplify Hawaiian lap steel guitars which were popular at the time. The first pickups were single-coils and while they do a good job of picking up the guitar signal they are also susceptible to picking up interference from nearby electrical devices. The Gibson® humbucker (US Patent 2896491) was developed in the 1950’s to eliminate the “hum noises” resulting from electromagnetic interference. The humbucker uses two coils and a pair of pole pieces (having opposite magnetic polarities of each other) for each string. The coils are wound and connected to each other in such a way that the current produced by the moving guitar string in the two coils adds up (in-phase), while the current produced by electromagnetic interference in the two coils cancels (out-of-phase). Not only does the humbucker drastically reduce noise from interference, but it also has a different characteristic sound. The single-coil pickup is commonly considered to have a thin, clear and bright (more treble) sound, while the humbucker is known to have a full, but dark (less treble) sound with more overall signal output.
Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.
The SG Standard is Gibson’s all-time best-selling guitar. It was conceived in 1961 and originally released as the new Les Paul. It featured distinct horn-shaped cutaways, and the neck joint was moved three frets, which made the guitar lighter and allowed easier upper fret access. In addition to these changes, the body was slimmer than the Les Paul Standard and the neck profile was more slender. However, with Mr. Paul preferring the sturdier design elements of his original model and due to contractual complications, his name was ultimately removed. Where Les Paul saw a mutation of his original design, others saw genius—from ’63 on, the Les Paul name was removed and the SG, or “Solid Guitar,” was born.
mid-1939 Popscicle bracing on D body sizes. See the above picture for what the popsicle or T-6 or upper transverse graft brace is. The popsicle brace was added to the underside of the top of the guitar, below the fingerboard. The brace was added to help prevent top cracks alongside the fingerboard. Since the first D body size was made in about 1934, problems obviously came about and Martin added the brace by 1939. The brace does not appear in pre-1939 Martin D-sizes, but transitioned in around 1939, and is present in all 1940 and later D models. Without the popsicle brace, the top is attached only by the strength of the spruce fibers and a 1/2" x 2" glue area where the top overlays the soundhole #1 brace. With the popsicle brace there is an additional 1" x 2" glue surface directly under the fingerboard. Unfortunately the popsicle brace can deaden the sound of the upper bout area of the soundboard, and the popsicle brace doesn't always prevent the top from cracking along the fingerboard either. As people search for why the old Martins sound so good, they examine every aspect of them and the popsicle brace usually enters the conversation. Here's some data on popsicle braces:
Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.

The previous drawing illustrates the electrical and magnetic function of a single-coil pickup. Some pickups might use six permanent magnets in place of the six pole pieces to create the magnetic field, but the idea is the same: create a steady magnetic field around a coil in proximity to the guitar string. The name "single-coil" pickup becomes more significant when compared to the humbucker or "dual-coil" pickup.

Rule 4 – Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.


Large-diaphragm condenser microphones set to cardioid or omni mode work better for ambient purposes at distances of 2-3' or farther, introducing more room sound and coloration. Ribbon microphones, which are also (usually) dynamic, have become a popular alternative for guitar-cabinet recording in either close or distant miking situations. They combine good, detailed sonic reproduction with the capacity to withstand intense levels of sound pressure (a characteristic of their dynamic brethren, as well).
Distortion – A dynamic effect that sounds like your guitar is being played through a loud, distorted amplifier. This can range from a slight crunch to a full-on metal distortion. The first distortion tones boosted the gain of an amplifier’s pre amp to the point where the guitar signal begins to “clip”. This clipping changes the harmonic structure of the guitar sound and the additional overtones heard as distortion. Connecting distortion pedals to the “front” of the pre-amplifier helps create the break up sound before it reaches the power amp.
If you plug your electric guitar into the auxiliary input of your home stereo, you can get away with not buying an amp at all. All you need is a special, inexpensive adapter that you can purchase at any electronic or music store for less than $3. The adapter is just a metal or plastic-coated plug that has a female quarter-inch jack on one end and a male RCA (sometimes called phono) plug on the other. (Just tell the salesperson what you want to do, and he can supply the correct unit.) The following figure shows how the adapter and the guitar cord work together.

The brands we talked about today are considered to be the most trusted on the market. Even so, you might want to skip the bare-bones entry level models as those are bound to come with a flaw of some sort. We showed you a number of guitars from each of the brand’s current lineup. Those represent well rounded and balanced choices for beginners and intermediate players alike.


According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.

Because of the high quality, Gibsons are among the more expensive models of guitars. However, Epiphone, of whom they are the parent organization, produces high quality guitars at much more affordable prices. These guitars are usually slightly inferior to their Gibson counterparts, but the playability and style are similar, and they are still a definitely among the good guitar brands.

Where there is more than one pickup, a switch selects between the outputs of individual pickups or some combination; two-pickup guitars have three-way switches, and three-pickup guitars have five-way switches. Further circuitry sometimes combines pickups in different ways. For instance, phase switching places one pickup out of phase with the other(s), leading to a "honky", "nasal", or "funky" sound[citation needed]. Individual pickups can also have their timbre altered by switches, typically coil tap switches that effectively short-circuit some of a dual-coil pickup's windings[vague] to produce a tone similar to a single-coil pickup (usually done with push-pull volume knobs).
×