In this range, you will find many premium options. Many guitars in this range will offer some of the best features available. Again, you will find many upgrades from less-expensive models. Often, these are considered the standard models. Of course, you certainly don’t have to spend $1000 to get a great guitar. However, most guitars of this caliber will satisfy even the most discerning player. Musician’s Friend’s Private Reserve collection includes instruments that cater to the most demanding professional guitarists’ requirements.
The Dunlop Cry Baby is a classic example of a great wah pedal. This pedal adds a ton of texture and nuance to guitar solos, and can also be used to create some very funky ‘70s-ish effects. A wah is essentially a controllable frequency filter. By manipulating the pedal you can change your tone from treble to bass and anywhere in between. This control is part of what makes the wah effect so popular.

One thing to point out here. When you take the strings off a Les Paul, there is (usually) nothing holding the bridge or the tailpiece on, so be careful with this. That said, I do want to mention that while the strings were off this guitar, I took the opportunity to lower the tailpiece. I prefer the tailpiece to be lowered all the way to the body if possible. Many believe that this will give you better tone/sustain, although it's hard to prove such a thing scientifically. That said, there is very little reason for the tailpiece to be anywhere other than as low as possible anyway.
The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
Choosing an electric guitar that addresses these preferences helps guarantee that new players will stay motivated as they learn to play. Musician’s Friend offers a wide selection of ¾-scale, mini, and travel guitars that are ideal for smaller, younger players. Full-sized electric guitar bodies vary considerably in size and weight, and those factors should be considered.

Alan Parsons: "I always use condenser mics on a guitar amp, never dynamics — they're too telephoney. That's an unfair expression for a very good dynamic mic, but by comparison to a condenser, you're not going to get the bottom end." While this stance is more hard-line than that of most engineers, condenser mics are, of course, regularly used for recording electric guitars. However, in practice they rarely seem to be used on their own and are very often lined up alongside the trusty SM57.
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
With Dave Matthews playing an electric guitar in place of his usual acoustic, the band delivered a performance of “Samurai Cop (Oh Joy Begin)”, the lead single from Come Tomorrow, their record-breaking seventh-straight album to debut at #1 on the Billboard charts dating back to 1998’s Before These Crowded Streets. You can watch Dave Matthews Band’s performance on Ellen below:
Fast forward a few hundred years to the world of guitar pedals. The first registered portable effect pedal for guitarists built in 1941, called the DeArmond 601 Tremolo Control, was a clumsy toaster oven-shaped unit with a heavy granite-like exterior. The tremolo effect worked by reducing the signal from the guitar several times a second through an electrolytic hydro-fluid located in a glass canister inside the unit. When activated, the main voltage motor rapidly shook the canister, causing the fluid (water, windex, and even mercury) to stir and splash against the pin and the guitar signal to ground, creating a “watery” tremolo sound.

Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”

Like Kleenex for tissues or Dumpster for large garbage containers, the brand Teisco has become a kind of shorthand for “strange looking Japanese guitar from the 1960s.” When someone posts a picture on a forum of a vintage Japanese guitar that he’s trying to identify, five people will immediately shout out “Teisco!” Occasionally, they’re even right.


The three notes of a major triad have been introduced as an ordered triplet, namely (root, third, fifth), where the major third is four semitones above the root and where the perfect fifth is seven semitones above the root. This type of triad is in closed position. Triads are quite commonly played in open position: For example, the C-major triad is often played with the third (E) and fifth (G) an octave higher, respectively sixteen and nineteen semitones above the root. Another variation of the major triad changes the order of the notes: For example, the C-major triad is often played as (C,G,E), where (C,G) is a perfect fifth and E is raised an octave above the perfect third (C,E). Alternative orderings of the notes in a triad are discussed below (in the discussions of chord inversions and drop-2 chords).
{"eVar4":"shop: guitars","eVar5":"shop: guitars: acoustic guitars","pageName":"[gc] shop: guitars: acoustic guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: acoustic guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range acoustic guitars","prop5":"[gc] shop: guitars: acoustic guitars","prop6":"[gc] shop: guitars: acoustic guitars","prop3":"[gc] shop: guitars: acoustic guitars","prop4":"[gc] shop: guitars: acoustic guitars","campaign":"4soswxxa","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Just as it’s important that the guitar, amp and effects are performing to spec, make sure that all cables are functioning properly (it’s uncanny how many times a lead that was working fine yesterday suddenly develops a fault just before a take). It’s a good idea to ensure that spares are available. That goes for strings, too – valuable recording time can be lost just because a string has broken and no one has a spare. Some engineers will try to insist you use brand new strings when recording, but don’t be bullied into it if you prefer the warmer sound of a played-in set; that applies especially to bass, as new bass strings can introduce undesirable harmonic content into the sound.
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..

{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site1prodL20582","sku_rep_id":"site1skuL20582000001000"},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}


Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2 DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports
G&L, owned by Leo Fender, is yet another brand producing quality guitars. (Of course, when it is owned by the same owner as that of Fender, one can expect the extent of quality of these guitars.) Many of the G&L guitars seem to relive the Fender classic designs with some improvisations in style. Thus, this brand can indeed be considered an excellent alternative to Fender. Instead, in many instances, you will find G&L outnumbering Fender.

The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.
Other artists, such as George Benson, John Lennon, and the world renowned B.B. King would use the instrument to its fullest capability to produce a clean, bright, woody tone reminiscent of fully hollow guitars, while being able to provide the volume levels to perform in much larger concert halls without the inherent issues known with fully hollow body guitars.
I just recently started to try to" really learn" to play guitar. I've known a few "not too difficult" songs for years. Now at 45yrs. old I bought a couple of cord books and it's bittersweet. It's such a wonderful feeling to play songs all the way to the end with a friend of mine who told me years ago that I had a good natural musical ability. I've learned more in 3 or 4 months than in 25 years. But enough about that... I was handed a jumbo GUILD from I believe around the early 70's. I've never heard anything like it. I must have one!!!
Complex though some of these techniques are, probably the most powerful use of multi-miking I've encountered during my investigations comes courtesy of Jack Douglas, who makes creative use of phase cancellation between microphones. "For guitar overdubs, the best EQ in the world is the phase EQ, which you get by using multiple mics on a speaker. For example, take a Shure SM57, a Sennheiser MD421 and your favourite condenser, and set them up in a triangle with the two dynamics at an angle up against the grille, but off axis. Then take your favourite condenser mic, put a 10dB pad on it, and place it about a foot away, facing the speaker, on axis.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
I am a beginner player and I am a bit disappointed in both Fender and Gibson. Both entry level guitars suck, for beginners like me. Why not they make the fret board neck nut a little more wider so that its easier for learning. In the last 5 years playing both Fender Starcasters and Gibson Maestro, I cann’t play chords properly. I am still looking for entry level guitar for my chord practice without breaking my budget ($700).
Just starting your electric guitar journey? The Epiphone Les Paul Beginners Electric Guitar is specially designed to cater to the needs of beginner guitarists. With the Epiphone named attached to this instrument, you know you're getting top quality. The Epiphone Les Paul Beginners Electric Guitar comes with Alnico Classic Humbucker pickups which give a lot of warmth to this guitar's sound. The neck and body are made of mahogany which gives the best sound quality. The slim design makes for fast learning.
Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
Our first impression of this guitar was that something must be wrong. Surely this guitar is way more expensive than we thought? We doublechecked and the truth is that it’s just incredible value for money. Both the design and the sound are wonderfully good and we understand why Schecter describe their Schecter Hellraiser guitars as having “raised the bar on sight, sound, quality and affordability”- we totally agree!

The Line 6 Spider Classic 15 is similar in many ways to the Fender Champion 20. It offers digital simulations of various amplifiers and built-in special effects. The two amps are usually priced identically. The reasons we didn’t make the Spider Classic 15 our top pick is that it’s much larger and heavier than the Fender (about 40 percent overall, at 14.7 by 15.7 by 8.3 inches and 18.4 pounds), and its controls work in an unusual fashion that sometimes frustrated our panelists.


Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.
A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-line headstock and creme binding, give it a shot of electrifying attitude. Dynamic, unique and unconventional—like today’s guitarists—the Redondo Player refuses to be bound by the past.

I’m getting a bad hum that almost goes away when I turn the volume up completely….gets loud as I turn it down. Someone rewired the guitar with 2 pair wire…..they attached a ground to the vol and tone pots everywhere the wires went….and also the body of the switch. I think it’s a bad ground loop problem….I’m going to change everything to single strand wire. I’m guessing there’s a voltage difference somewhere and it gets close to normal when I turn it all the way up on the volume pot.


To THIS DAY, In My Life of being a Guitar-Player, I am Constantly STUNNED By The fact that SO many people-playing-guitar, know 'Diddly-Squat' about STRINGS.---When I Meet a New SOUL, Who Claims They are a Guitar-Player, Then When Asked 'What-Kind-of-Strings' do you Use,----I Get This 'Blank-Stare', which tells me Straight away They Don't even Know What-Size Shoe they Ware.----Very Strange.
The same no-compromise attitude that gives the Newporter Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech - NuBone nut and saddle for greater sustain and a Fishman preamp system that makes it easy to plug in without sacrificing the guitar's natural sound. Its lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style, and its walnut fingerboard and bridge further augment this instrument's vibrant tone.
Delay/echo effects can sound pretty good when plugged directly into an amp’s input (See Example 3, above)—hell, the Edge built a whole career out of doing just that—but if you want absolutely clean, pristine delay and echo effects with no distortion, the effects loop is the only way to go. Reverb effects should always be patched into the effects loop (See Example 4, below) unless you always play through the cleanest of clean sounding amps. Overdriven or distorted reverb just ain’t very pretty, and it can destroy any semblance of clarity or definition and smear your sound like the ketchup on a baby’s face when it’s trying to master the fine art of eating a messy pile of French fries.
When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.
While Fender specialize in the single-coil pickup, it’s Gibson who are masters of the pickup in general – and it shows when you browse the chart in our dedicated Gibson pickup article. However, you’ll quickly discover that there is no ‘one Gibson pickup’, as the brand offer a wide range including single-coils and humbuckers, medium and high outputs, and vintage and modern tones. You’ll find different pickups on all of Gibson’s famous models, including the Les Paul, Firebird, SG and Flying V. Perhaps they are best-known for their PAF-style humbuckers – an awesome vintage tone that is well-replicated in their famous Gibson ‘57 Classic Plus.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:
15 Series: Constructed of solid all mahogany woods, featuring herringbone rosette, matte finish and A-frame “X” bracing. Models include D-15 and OMC-15E. Also acoustic bass guitar BC-15E. John Frusciante of the Red Hot Chili Peppers favors this series, himself owning two vintage O-15 acoustics. Used on solo albums (most notably on Curtains) and albums with the band (like the recent Stadium Arcadium), Frusciante’s O-15s can be seen in action during live performances of songs, including Venice Queen (most memorably at Slane Castle) and Desecration Smile. Chris Martin ofColdplay also uses Martin & Co. 15-series, which can be seen during Mylo Xyloto concerts. Martin also made a line of D-15 style guitars for Guitar Center/Musician’s Friend. The Guitar Center model is called the DSR and has a solid sitka spruce top with solid rosewood back and sides. Musician’s Friend had two models labeled as a simply Custom-D. Both models have a solid sitka spruce top as well as either solid rosewood or mahogany back and sides.

Guild acoustic guitars are played by some of the best professional musicians in the business. From this standpoint, Guild is on par with Martin and Taylor, and completes the triumvirate of American acoustic guitar titans. As you’d expect, the prices follow suit. However, the GAD series offers a way for intermediate players to get a Guild acoustic for a reasonable price.

The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
I have inherited a heater "H300N" acoustic guitar but I can't find any info on it. The most I could find is that it was from the L. D. Heater Music Company that was based out of Beaverton, Oregon. They were best known for being a distributer of Lyle Guitars. Can anyone else offer additional information or where to find it? It's a bueatiful guitar and I want to know more info before I give it to my nephew or sell it.
The guitar offers a beginner some great features in sound and playability. For starters, it is technically a Les Paul (giving you a great “cool factor,” which is important when you’re first starting out). It cuts a couple corners that a Standard or Special Les Paul won’t, like the fact that it’s a bolt-on neck, and there are proprietary single coil pickups (as opposed to the standard humbuckers you’ll usually find in a Les Paul).
The E-18 and EM-18 were basically the same guitar differing only in electronics. The E-18 featured two DiMarzio humbucking pickups, a DiMarzio PAF at the neck and a DiMarzio Super Distortion at the bridge. In addition to the regular controls, the E-18 had mini-toggle phase switch. Production of the E-18 began in April of ’79 and about 5,307 (about 1,320 a year) were made until the guitar ended in early 1982.
My first guitar was an acoustic guitar made by Ibanez. At the time I got it, I was very into the acoustic-oriented bands that were dominating adult rock radio at the time, the mid-90s. You know, bands like Hootie & The Blowfish, Blues Traveler, the Goo Goo Dolls and Barenaked Ladies, for example. So this was perfect for me. I could imitate some of my current favorite acoustic guitarists and learn to play the basic chord structures of their songs. But the itch to do more grew, and I was ready to branch out into the foreign, exotic, sexy world of electric guitars. I bought one of those starter pack guitars that come with an amp, some power cords, a strap, picks, a guitar case, some kind of instructional materials, and everything you needed to transform yourself into Jimi Hendrix in a matter of days or even moments. I was all set.
Again, as with the bridge saddle, too low of a bridge will decrease the "drive" of the strings. Thus the sound and tone will suffer. Also a low bridge is structurally not a good idea, as the bridge can more easily crack (and damage the top of the guitar). Most original Martin guitar bridges are about 3/8" tall (from bottom to the highest part of the bridge).
Tremolo: A tremolo effect produces a slight, rapid variation in the volume of a note or chord. The "tremolo effect" should not be confused with the misleadingly-named "tremolo bar", a device on a guitar bridge that creates a vibrato or "pitch-bending" effect. In transistorized effects, a tremolo is produced by mixing an instrument's audio signal with a sub-audible carrier wave in such a way that generates amplitude variations in the sound wave.[80][81] Tremolo effects are built-in effects in some vintage guitar amplifiers. The guitar intro in the Rolling Stones' "Gimme Shelter" features a tremolo effect.[82]

{ "thumbImageID": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "defaultDisplayName": "Ibanez AEG10NII Nylon String Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51351266816534", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black-1351266816534.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tangerine", "sku": "sku:site51351266816747", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine-1351266816747.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000-00-60x60.jpg", "imgAlt": "" } ] }
It is a German company that manufactures bass guitars. Making a really good bass guitar is a difficult task. However, Warwick bass guitars have really mastered this daunting task. The growl of the bass, and its hollow and beautiful resonating tone is a striking feature of the bass. The company employs stringent quality control methods in wood seasoning, cutting, and resonance engineering. It is highly regarded among bassists and has attracted many notable artists like Robert Trujillo (Metallica) and Adam Clayton (U2). One of the greatest things about Warwick is that they manufacture guitars for everyone, from amateur hobbyists to professional players. If you are new into electric bass guitars, then Rockbass Corvette Basic and Streamer Standard Electric Bass guitars are great options for a rocking start.
The 1960s were the Golden Age for guitars in America. The folk music boom was followed closely by the British Invasion and the demand for guitars skyrocketed as young people by the millions started making their own music. The Silvertone Amp-In-Case model 1457 was the entry point for thousands of them. Some of the most sought-after Silvertones are from this era … more
One of the greatest things about being a touring musician is having the opportunity to see, hear and play with some of the greatest guitarists on the planet. Over the course of my career, I’ve performed with legendary guitarists like Ted Nugent, Steve Cropper, and Glen Campbell, to drop just a few names. Playing lead for a headline act like Toby Keith also allows me to watch fantastic guitarists like Keith Urban and Brad Paisley take the stage before me.
The musical revolutions occurring during the period in question created the first well-known guitar heroes, and gave their guitars iconic status. It is no surprise that the right guitar can immediately conjure a specific period in time, both with looks and sound. And modern day guitarists who want to capture an essence of that period will naturally tend towards these guitars. Nothing says 1950s quite like a Gretsch. Nothing says 1960s quite like a Vox teardrop or Phantom.

Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Custom - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Ivory, Sunburst
Ibanez brand guitars are manufactured at a variety of factories in several countries under contract from the brand's owner, Hoshino Gakki Group. The catalogs scanned and linked below represent output from the year 1971 through the present. During the 1970's and most of the 1980's, Ibanez guitars were made almost exclusively in Japan, and the majority of electric models were made at the Fujigen Gakki manufacturing plant.

The movie is very hauntingly beautiful, and it's especially highlighted by an awesomely haunting score, and some breathtaking visuals. The story is interesting, but it's definitely slow-paced, and the climax is much more of an intellectual payoff than a spectacular action scene (which many viewers might be hoping for). So I can definitely see why some people would hate this film, but I loved it. It's one I definitely won't forget anytime soon too, and it's great to see Natalie Portman (my old favorite actress) back in top form! watch movies online pro
In recent years,[when?] guitars and basses with multi-scale or fanned-fret fingerboards started to appear. These instruments are supposed to offer an advantage over the classical fixed-scale guitars and basses by providing more freedom in setting the tension of each string at the design and manufacturing phases. This may result[according to whom?] in a more uniform tension of the strings, as well as possibly[weasel words] offer timbre and tonal characteristics somewhat different from the usual fixed-scale instruments.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.
When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​

This list is an amateurish joke. Many guitars listed are pure cheap junk I'd toss in the garbage even if they were free. Take it from a 45-year Pro, Parker & PRS are the 2 highest quality. Fender, Ric and Gibson, along w/ brands that have stood the test of time, plus a few hand-made (custom) brands are the only ones you can seriously depend on. The rest are mostly pathetic attempts at copying a major brand and cutting the price by REALLY cutting back on quality. As they say: "You get what you pay for. "
The Dobro Standard Guitar is not shown, but this is described as a “…conventional arch top body” with Dobro electric amplification. Like the first National Spanish, this had f-holes and was made by Regal. The Dobro Mandolin is also described as having a “conventional” body, probably a pear-shaped mando, again, by Regal. These were probably introduced slightly later than the Hawaiian.

Many Sixties rock acts made political statements, but the MC5 were among the first rockers to make a serious commitment to revolution, aligning themselves closely with the White Panther Party (a Black Panther offshoot organization) and effectively serving as the White Panthers’ agitprop machine. Their blue-collar Detroit roots lent a certain gritty gravitas to their stance. These weren’t effete rock stars dabbling in left wing chic but working-class guerrillas with ammo belts strapped across their bare chests and guitars brandished as rifles.
Lastly, there is a core group of survivors in this company. Nice people but probably not the most dynamic or skilled. That said, they manage to get the job done under some pretty trying circumstances. Getting hired and quitting or getting fired after 6 months makes their job much more difficult because they needed to train you and it takes time away from their work only to have that person leave. If you don't have what it takes to work here then stay away because this causes more harm to all involved including yourself. There are people working under stress with families to provide for who don't need to get hosed by some 'guitar dude" who couldn't cut it. In summary, don't get starry-eyed because you think guitars are cool and that will carry the day. Think about what this place will do to your credentials and ability to move on to the next stage of your career which working at Gibson will force sooner than you expect and by all means, be considerate of those special folks who will have to re-fill the gap after you leave.

Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]
Later, around 1963, rebadged Guyatone and Teisco guitars appeared, both in the U.S. and a few in the U.K., also as Futuramas. That was the beginning of several years of Guyatone-made Kents. The Teiscos seemed to be part of the 1963-64 freshman-class only. After starting with an initial group of both Guyatone and Teisco guitars, the importer seemed to settle on Guyatone as a main supplier.
The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with all-too-similar circuitry – you need the input and output jacks, the bypass switch, and a barrel jack for power input. In some pedals, there may be as much wiring involved in the jacks and switch as there is in the effect itself. The SparkFun Proto Pedal takes care of the hard part and provides you with a simple infrastructure; all you need to do is decide what simple circuit to make to gain your desired effect, and you’ll be ready to rock!
As the title suggests, solid body electric guitars don't have a chamber or hole the way that an acoustic guitar does; instead, they're made of solid wood. These are the most common type of guitars that you’ll find in shops or online stores. They're perfect for a wide range of musical situations. These guitars rely on the wood quality and their components to output sound. Below we’ll highlight four famous types of solid body guitars.
I'll be honest .. my Washburn N4 is hands down the best I've ever known. To me, Les Pauls sound amazing but are heavy and play like a log cabin. A buddy of mine's Suhr Strat felt/sounded clinical and small. An old Gibson SG felt like a cigar box jobbie. I remember in the early 90s looking at the Vai Ibanezes and the body was great despite the zany colors but the neck was too thin and whispy. I had the frets leveled and crowned and the action on mine 10 years ago and it just plays and feels like butter .. maybe 2 - 2.5mm at the 12th fret. The neck I sanded with 2000 grit now slighty reflects light so it glides beautifully feeling like 'satin wooden glass'. My aftermarket pickups puts the tone squarely into a modern fusion rock camp of sorts .. Oh yea and I think it's the neck shape of these Davies N4s that might make them so cool. The nut is a wider, more comfortable 1 11/16 inches with a flat fingerboard radius .. so may of the others seem like 1 9/16 with a cramped, rounder fringerboard. I did try a JP6 I didn't care for the feel of .. tl;dr ymmv :)
It's Mal - i posted the comment ref the muted G string on my Epi Les Paul 1960 Tribute - thanks for your response it was very good of you. I'm going to be playing (when i say playing i really mean faffing with) my guitar later so i'll have a look at the saddle, though i have rubbed my finger over it to see if there were any obvious issues which there wasn't. I have also rubbed the graphite from my clutch pencil over it when changing strings - no improvement; i'll get magnifier out and take a closer look and let you know, i may take you up on your kind offer if i'm still stumped.
i have played fender most of my life .Fast neck and comfortable .However when my musical interest changed to southern rock i decided to buy a gibson . The mahogony body sounds different as does the string thru design of my firebird .Now i play both .Out of the box i prefer gibson and dont need to change a thing .I see many fender players always looking for “that sound” changing pickups pots etc.and using many boxws to change the tone.All i use with my gibson is a wa wa and overdrive
All of the complex air-coupling interactions, along with the resonant properties of the tonewoods themselves, are a key reason that different acoustic guitars will have different tonal qualities. The sound is a complex mixture of harmonics that give this type of guitar its distinctive sound. Some of the most important varieties are the classical guitar (nylon-stringed) and steel-string acoustic guitar.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber
\n\n Harmony branded some of their old acoustic guitars with the Nashville\nname. \n\n There was a Japanese company called Nashville\nMusical Instruments NMI \n\n I have an acoustic guitar with no name on the headstock, and\na label inside that reads nothing but Nashville. I tracked down the information\non it once. It's a cheap guitar from the 80’s, made overseas, imported by a US\ncompany that sells children’s toys now. I can't for the life of me remember the\nname of that company now. I was searching for it, with no luck, when I found\nyour question. \n\n There is also the Nashville Guitar Company NGC based in\nInglewood, TN \n\n
I Shopped for a long time looking for a suitable nylon for both around the house and live performing. I ordered this Yamaha sight unseen and couldn't be happier with it. Fit and Finish is top notch. Price for value is incredible. playability is remarkably nice. Sound is great. I love the 14th fret to the body configuration vs my other nylons. The dual volume controls on the preamp give me a chance to glisten the high end in a band situation when my lines call for it. Honestly, i am a big fan of the Fishman electronics in my other acoustics, but this yamaha system leaves little to be desired. I did call yamaha support tto order a fitted soundhole cover and it took them a couple of days to get to me, but eventually called me until i
These guys are the best in town! I had my Gretsch 6120 Upgraded with a new Pickup. They were quick and at a reasonable price. They do amazing work. They also have a great selection of guitars and Amps for sale. I highly recommend stopping by. If your looking for a new guitar for yourself or your kids they will help you find the perfect guitar for your price range. I highly recommend stopping by. They also do amp repair! Stop by and see for yourself.
A Japanese company which is renowned for its amazing guitars, Ibanez is a great brand for beginners. Since the Ibanez RG450DX RG Series Starter Electric Guitar has a maple neck, mahogany body, and a rosewood fretboard. Together, these give this guitar a great sound. The Ibanez RG450DX RG Series Starter Electric Guitar is a pretty fine looking guitar with amazing sound to boot.

Bottom Line: The Boss ME-80 seems to be aimed at the beginner and intermediate guitarist who is getting into the effects game. What guitarists love about it is that it tries hard (and succeeds) at replicating the feel of messing with a pedalboard full of effects. Unlike the Line 6 POD HD500X, you won’t need the manual! We’re not necessarily taking a dig at the Line 6 pedal - that one very much has its merits, is FAR more customizable and editable, and arguably the effects and amp modeling sound a bit better. The Boss ME-80 is just a different style, and judging by the user reviews we read people really enjoy having all the knobs for all the effects immediately available. The Boss ME-80 is also a tremendous bargain considering how powerful it is. Sure, it’s not exactly cheap, but it’s a very well-made, intuitive, nice-sounding all-in-one multi-effects pedal which is great for practice, studio recording, and live use.
Who among us doesn’t relate to Nigel Tufnel in This Is Spinal Tap when he tried to explain to “Meathead” that having an 11 on his amp made it louder than – and hence superior to – one having a mere 10? That’s just how I felt back in the day when, after nearly two decades of owning one – that’s only one – guitar, a classical, I decided I ought to get an electric guitar again. Who could have known how slippery that slope would turn out to be?!
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red
Looping – These pedals are miniature recorders that capture a passage, which you can then play back as much as you like. Many looper pedals also allow you to layer multiple recordings, and advanced models support extra features like built-in rhythms, mic and other instrument inputs, MIDI, USB and more. It’s worth noting that all the power of a looper pedal does come with a steep learning curve, so be sure that you’re experienced enough to handle one of these bad boys before you bring home one of your own.
Scott Baxendale has been building custom hand made guitars since 1974. Recently he settled in Athens Georgia where he is currently building custom guitars, restoring vintage guitars and teaching the art of lutherie to aspiring craftsman. Scott Baxendale’s legacy of building custom instruments began in 1974, when he arrived in Winfield, Kansas to work for […]

*We build all of our Custom Shop and Semi-Custom instruments from scratch and on demand - therefore, Custom Shop and Semi-Custom orders are fulfilled in the order in which they were received. These times can vary due to demand and the custom options you choose. Our production/assemble time frame: 20 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.
Hybrid picking is a technique that makes use of both the pick and the remaining pick hand fingers. On the surface, it’s more versatile than playing with just with a pick. Digging deeper, you’ll learn hybrid picking has the same, yet different mojo than fingerpicking as well. At the end of the day, this technique is a very powerful one that will enable you to play things that would be otherwise impossible. Be it oddly accented phrases to wide interval licks to more intricate chordal ideas, hybrid picking opens up in credible options.

The pickups on this guitar are really cool and not found on any other model that I’ve seen.  They are really loud single coils reading out at 5.58k at the bridge, and 5.90k at the neck.  The pole piece screws even have some “gold foil” surrounding them, which is really cool and not usually seen.  These pickups sound very close to vintage American p90s, and they have this loud, articulate, sparkly clean tone combined with a really grindy dirty tone.  These pups are special, seriously!  Also, those switches were standard fare through the late 60s on most Matsumoku guitars.


“The tremolo tail assembly was engineered specifically for the Spectrum ‘5.’ The bridge is an integral part of the whole assembly and is, of course, universally adjustable. The marvel of it all, however, is that the tremolo does not exert any friction (hence no wear and tear) on the strings. The tremolo action causes the whole bridge assembly to move smoothly back and forth.
Swan7 offers the best quality guitars for most musicians. Based in Brooklyn, New York, Swan7 provides superior quality musical instruments for the music lovers. They are specially recognized due to their durability, reliability, and affordability. Hence, no matter if you are looking for a budget-friendly choice, or are yearning to buy an expensive model, Swan7 will satisfy your thirst for the best guitar.

Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list
Fred’s wife Lynn Shipley Sokolow served as our student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. I also got Wirecutter’s John Higgins to give me his opinions of the amps; he is a Los Angeles session musician and frequent Wirecutter contributor who has a master’s degree in music from the University of Southern California and more than 10 years’ experience teaching music at private schools.
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
Steel-string Acoustic Guitar The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The most common shape is the dreadnought (originally developed by C.F. Martin & Company), which incorporates a deep soundbox and a smaller and less pronounced upper bout, giving it a wedge-shaped appearance. Other popular body styles include the larger jumbo body shape, as well as the smaller auditorium (000) body style and even smaller grand concert (00) body style. Check out the Martin Ed Sheeran X Signature Acoustic Electric for a smaller body type with a punchy sound.
Time controls the length of time between any two repetitions of your signal. It is most often measured in milliseconds (ms). Most delay pedals don’t have a delay-time readout that would enable you to determine exact delay times in milliseconds, so you typically just adjust the Time knob to get an approximate time based on the unit’s available range. For instance, the Boss DD-7 (street $179) has a Mode knob that selects between four time ranges—up to 50 ms, 51–200 ms, 201–800 ms, and 801–3200 ms—and the Time knob then adjusts the setting within the selected range.
Another great practice amp in the running for best electric guitar amp for beginners is the Blackstar HT Series HT-1. It’s a 1W tube amp with a single 8″ speaker. It features 2 channels (clean and overdrive), stereo MP3 / line input and external speaker output. It’s use of dual-triode ECC82 tubes provides the crunch and break-up characteristics of a traditional 100w amp at a much lower volume. It also has EQ, Gain and Reverb settings.
Using that pickup and gain level, you should be able to hear some guitar distortion. Of course, if that's not entirely satisfactory, there are a few other things you can do. If your amp has tone controls, you can turn up the mid knob to hear the guitar distortion more clearly. If there's only bass and treble controls available to you, you can turn both of these down a little to hear more distortion.
This is a similar model to the one we just talked about. However it’s a more basic version. Aside from a different finish and several other factors, it’s the same guitar. Tone-wise, everything is on point and you can dial in a variety of great tone colors. S series is definitely one of my favorite. I have a lot of hands-on time with them, and they are on my list of favorites.
My question for this forum is this: I currently have a 2011 Fender Blacktop HH Stratocaster. It has the stock five position switch. All of the electronics are imports i.e.Korea, China etc.. I recently purchased a complete loaded pickguard from a Fender American Standard HH Strat. due to the poor overall performance of the Blacktop electronics-pickups included. Since the Amer. Stan. HH has only a 3 pos. switch, can I rewire it for a five pos. switch ( i.e. coil tapping the humbuckers as the Blacktop is configured)? If this is possible, where would I find a wiring diagram for these particular Fender Twin Head Vintage pickups showing them in use with a 5 pos. switch? Thank you for your time and cooperation.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 
Little-known manufacturer from Osaka, Japan, this company is responsible for the oddly named John Bennet badge. Nakai has been mentioned as a possible Matusmoto Musical Instruments Association member in the past. The company still exists and is producing musical instruments, quite a feat in light of so many manufacturers who faded after the golden electric guitar age.
I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.
Originally the Stratocaster was offered in a 2-color sunburst finish on a solid, deeply contoured ash body, a 21-fret one-piece maple neck with black dot inlays and Kluson tuning heads. In 1956 Fender began issuing solid Stratocasters with alder bodies.[4] In 1960 the available custom colors were standardized, many of which were automobile lacquer colors from DuPont available at an additional 5% cost. The unique single-ply, 8-screw hole white pickguard held all electronic components except the recessed jack plate—facilitating easy assembly. Despite many subsequent Stratocaster models (including copies and the Superstrat), vintage Fender models are highly valued by collectors for their investment potential and players who prefer the timbre of older models.
My tak is an amazing sound an unforgiving strong clear medium to deep sound great feel it's a limited edition and kicks my buddies 3800 buck Taylor's ass my guitar was a bit pricey at 2800 but well worth it my 6000 price Martin is not as nice as my takemine maybe I got lucky and the guitar just turned out that way who knows it is the most amazing clean very vibrant and holds the notes so long I have played them all only one guitar has this sound and its this one only for deeper sounds I have my Martin and ovation has unique sounds and the Gibson is softer and Taylor sucks sounds like a osterizer blender if you tried my guitar you would be shocked by its sounds I have played the same model and the other ones sounded the same as each other I don't know why the one I own sounded so much different I guess I lucked out. I also have an old Hagstrom acoustic and it sounds phenomenal better than any Taylor I have ever played it sounds very much like a high end Gibson but not as soft. try a ...more

When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​


Now that you know a little bit of history behind the electric guitar, let’s dive into some of the different types of electric guitars that you can find at Sam Ash. You may be thinking to yourself, “Why are there so many different types of electric guitars?” The reason is this: each and every type of electric guitar serves a unique purpose and will cater to various types of playing styles and musical genres.
×