Echo (also sometimes called long delay) is a natural effect as well, but it is only encountered in large open spaces such as canyons or stadiums. It sounds like when you emit a loud, sharp yelp and a second later you hear the yelp come bouncing faintly back to you from a far wall. This is a particularly fun effect to play around with by yourself. If you set the delay of the echo long enough, you can play against the notes you just played and harmonize with yourself while the rate sets up a kind of beat.

If you’re looking for a unique sound that delivers an exaggerated twang, than the Gretsch G5422TDC Electromatic is the best electric guitar to offer these features. Designed with wider frame and a hollow body, this guitar utilizes “Black Top” Filter’Tron pickups to deliver a dynamic sound that is both bright and focused in its tone. The toggle has three positions that allows the user to customize the balance of the tone, and all strings on the guitar are able to deliver strong intonation due to the Adjusto-Matic bridge. The vibrato tailpiece adds resonance and depth to the sound quality, and by utilizing maple for the body frame there is a clarity provided within the tone that is unique to that design. With a three position pickup, open-back tuners, and a rosewood fingerboard, this retro style guitar provides a high-quality option for musicians alike. Here’s a great G5422TDC video for some samples of that warm hollow-body sound.
However, unlike a boost pedal, the overdrive effect is not dependent on the amplifier to have a distorted sound. The overdrive pedal will internally boost the input signal so much that the top of the signal wave will be forced to naturally shrink itself. This is called soft clipping and it simulates amplifier like clipping as though an amplifier was being overly driven, hence the name overdrive. The distortion pedal will also boost the input signal but will then add resistors within the circuitry to not just shrink or soft clip the wave form but completely flatten the wave peaks. This is called hard clipping. For more understanding on the differences between soft clipping and hard clipping see the illustration below.
May Music Studio's Guide: The May Music Studio isn't a true "blue book." Rather, it is the website of a guitar studio that provides a quick tip guide to help you determine the fair market value of your guitar. The studio has years of appraisal experience and though they no longer offer appraisal services, their wisdom is distilled in the evaluation tips that they describe on their site.
I have played all sorts of guitars, Guild, Gibson, Epi, Lowden, Fender etc etc. Walden for a beginner/intermediate are far beyond anything you can get for the same money. Exceptional sounding and great build quality, and because no-one has heard of them you can pick them up for half the price or any of the "named" brands if you get a good used one. I have had my hands on 3 in recent years, I got them for less than £100 each - one for £50 and it held its own with anything else I had that cost nearly £1k new. I would recommend them absolutely.
The relationship between power output in watts and perceived volume is not immediately obvious. The human ear perceives a 5-watt amplifier as half as loud as a 50-watt amplifier (a tenfold increase in power), and a half-watt amplifier is a quarter as loud as a 50-watt amp. Doubling the output power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural compressor at high volumes.
To simplify the many available guitar body shapes available, we can categorize them into three shapes: double cutaway shape (eg. Stratocaster), single cutaway (eg. Les Paul), and exotic shapes (eg. Flying V). While it maybe considered superficial, having the right guitar shape will add to how enjoyable an instrument is to play and look at - which in turn inspires you to play more and better. In addition to shape, getting a good grip of basic body configurations is essential, here's a primer of the three most common:

3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.

An acoustic guitar suited to bluesy rhythms. Has quite alot of fret rattle with the high velocities but also a certain amount of mid to high frequencies which helps to give it its own place in a mix. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them.

I first met Ralph Novak in 1980, when he was working at Subway Guitars in Berkeley, California. I'd assembled a kit Strat and it needed a refret. My monstrosity was painted Shell Pink in tribute to Strats from Fender's surf era. Little did I know what was to come of Ralph's distant future. He was the fret guru in Berkeley, and his work was astounding - the best I'd ever seen! Ironically, Vintage Guitar columnist Stephen White was also working at Subway at the time. So began our journey into luthiery madness! Fast forward to 1989.
Some of the smaller amplifiers that I like to talk so much about are not really that small. I mean, the Marshall MS4 Mini Micro Full Stack Battery Amplifier is anything but small, in terms of sound at least. It has a powerful volume output that is hard to ignore for anyone, be it in some bar or in the street or at some gig. The tall tower like shape of the guitar is exceptional in design and yes, while the stack is a little on the big side, the affordable price of it and the quality of tone and volume is definitely worth the little bit of a size problem. Definitely worth your consideration!
SOLD OUT: Super condition its been kept in the case over 25 years WoW!... JVG just set-up and plays wonderfully no buzz no drag its EASY to play now and it has NO WEAR almost like owning NEW Vintage! Sounds good ! its loud and robust TONE this is a great deal on an absolutely wonderful guitar. This was well crafted in Korea in the late 1980's same as Japan spec incredible. Lots of vintage guitar for a great price Its woods are as follows... Top is Spruce nice straight grained and may be solid cant see a seam it is what it is as made, the back and sides are all a fine instrument grade mahogany as is the neck a medium slim profile neck feels great , the headstock has the rosewood overlay with Fender logo in mother of pearl with gloss finish to front headstock as the body is gloss front - sides and back and the back of neck smartly in satin finish to not show finger prints easily.. Fit and finish is rated JVG at very good - excellent vintage easily Near Mint rating I'm still looking for a dink and cant find one yet, but thats not to say there may be something minute somewhere but I looked it over good and she qualifies for near mint rating vintage and is WAY BETTER than average. The fingerboard I believe is ebonized rosewood and shows no divots at all... same with frets I polished them pre set up and I can attest they are excellent too... Neck angle and action is very good straight and as a result the action is set to within Martin spec and plays excellently with no buzzing. Original tuners on board and are good quality and do the job well, intonation on this guitar is good so it sounds sweet up or down the fingerboard... surprisingly great tone for a guitar anywhere near this price point, You will be very pleased. Comes with its original semi hard chipboard case black good all latches and handle are good, Here is a great sounding and playing Vintage Korean guitar that will be sure to please. Questions ? asl Joe .

Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Diamond - # of Strings: 6 - 12 - Scale Length: 25.5" (65cm) - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Custom - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Natural, Brown

Fuzz boxes and other heavy distortions can produce unwanted dissonances when playing chords. To get around this, guitar players (and keyboard players) using these effects may restrict their playing to single notes and simple "power chords" (root, fifth, and octave). Indeed, with the most extreme fuzz pedals, players may choose to play mostly single notes, because the fuzz can make even single notes sound very thick and heavy. Heavy distortion also tends to limit the player's control of dynamics (loudness and softness) - similar to the limitations imposed on a Hammond organ player (Hammond organ does not produce louder or softer sounds depending on how hard or soft the performer plays the keys; however, the performer can still control the volume with drawbars and the expression pedal). Heavy metal music has evolved around these restrictions, using complex rhythms and timing for expression and excitement. Lighter distortions and overdrives can be used with triadic chords and seventh chords; as well, lighter overdrive allows more control of dynamics.[citation needed]
Pickups are complex devices. No matter what we do, we cannot model them with spot-on accuracy. They do have a series resistance (R6), but the L1 and C3 inductor and capacitance, respectively, but these are not real circuit components, but are a simple model placeholder for the complicated interactions that appear due to Maxwell’s equations, when we have a wire wound around magnets (see below image):
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It's been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until '75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.
In 2013 Vox released updated "G2" versions of the 15 watt and 50 watt heads, and added a combo version of the NT15H-G2 called the NT15C1. Compared to the original NT15H, the NT15H-G2 adds a foot-switchable Girth channel (which first appeared on the original NT50H) with an additional 12AX7 in the preamp section, a "Dark" switch, a digital reverb, and an effects loop. However, Vox did not retain the pentode/triode output section modes from the "G1" version that allowed for full or half power operation as well as a broader tonal palette. The NT50H-G2 differs from the original NT50H with the additions of an XLR D.I. out and a digital reverb, and the deletions of one 12AX7 preamp tube and the "Tight" switch. It also appears the FX loop is no longer bypassable. Gone is the bright chrome look of the "G1" models as both heads received new cosmetics in the form of a black mirror finish on the tube cage and a new suitcase-type handle. Vox also released "G2" versions of their matching cabs: the V112NT-G2 (one Celestion G12M Greenback speaker), and the V212NT-G2 (two Celestion G12H 70th anniversary model speakers), each also sporting the suitcase-type handle. The new NT15C1 combo combines an NT15H-G2 chassis with a single 16Ω 12” Celestion G12M Greenback speaker in a black tolex cabinet with a suitcase-type handle.
But here at Uberchord (click to download the free guitar learning app) we get that your dream is maybe about playing electric guitar. And if that’s what you want to do, then starting out with a good electric instrument makes sense. But what makes a “good” guitar? Well, if you are confused about what kind of Guitar to buy, you can check out our post on: Types of Guitar: Beginner’s Guide to Buying A Guitar.
You are likely to encounter phase issues when you have the same sound hitting a microphone from two different positions. The more mics you use or the more distance is put between mic and speaker in a reflective room, the more likely this will occur. The result is an effect called “comb filtering,” which cancels out certain frequencies and emphasizes others, creating an odd sound. Part of the reason for using distant-miking techniques is to obtain some “room sound” in the tone, which is created in part by such reflections, but at times these will have an adverse affect on the focus and solidity of your guitar sound. If a distant position with just one mic is sounding considerably more thin, loose, and washy than a close mic on the same amp, move it around, experiment with other locations, and see if you can eliminate these issues through mic placement alone. Otherwise, consider using a baffle or two to shield the mic from specific reflective surfaces.
I learnt to play guitar in my late teens, mainly because it was cool and the girls seemed to like hanging out with guitar players. I started off with a couple of weekly lessons with an elderly lady who managed to teach me some basic chords. After that I continued learning from friends because, imagine this, there was no internet at that time and no cool dudes who knew how to teach to play pop and rock guitar. Well, I strummed my acoustic hard and moved into playing folk and some bluegrass and had fun basking with friends on weekends and during school holidays.
The one-man band has been elevated to new heights lately, but behind the loopers and pads, there usually lies an unremarkable musician. Australian songwriter Tash Sultana brings a widescreen pizazz to the format. Her sprawling, expertly weighted amalgamations of hip hop beats, soothing synth pads and foil-wrapped shimmering tones, give way to surprising bursts of scuzzy, shred-y solos, creating an exhilarating contrast to her breathy vocals. A talent that doesn’t decay with the delay pedal.
Then there's the obvious fact that wood has no magnetic properties, so it's simply impossible that any acoustic vibrations from the body will have any effect on the amplified sound. It's also not true that any acoustic qualities of the body wood are somehow imparted back to the vibrating string; the vibrations go out into the air and, well, that's it. They're a by-product, nothing more.

There are two basic tremolo circuits found in classic amps; power tube tremolo and photocell tremolo. They produce basically the same effect, a fluctuation in volume. For the best definitions I have come across I’ll borrow from the Strymon website: “Power Tube Tremolo utilized the LFO signal to directly influence the power tube bias of the amplifier’s push-pull output stage. The power tubes are biased into lower and higher idle currents, creating the fluctuating gain that produces the tremolo effect. The effects of crossover distortion at low tremolo volumes, increased power tube harmonic distortion at maximum tremolo volumes, as well as the influence of power-supply sag, all add up to the boggy and dirty nature of this tremolo circuit.”

Madbean Pedals provides schematics and circuit boards so you can create your own pedal kits. As the creator, Brian, describes it, “I love making music and I love making things, so pedal building is a happy accident for me. Mostly, it came from being too broke to buy any gear. I owned and used only two pedals for about a decade: a TS-10 and a Digitech PDS-1000 Digital Delay. I used those for both my bass and guitar gigs. Even my drum gigs, I think. Anyway, rather than spend money I didn’t have, I decided it would be more fun to take a “peek under the hood” and see what the whole effects thing was about. That was about six years ago, and the obsession grows a little more every day! “

Yeah, I wasn't meaning to disparage either brand. While not necessarily "cool", they both offer solid stuff and a really good value that really competes with luxury brands. I'm not a car guy, so I'll stay on the guitar side for an example - Schecter can offer a mahogany body with a flame maple top and binding, set neck, ebony fretboard with abalone inlays, 25.5" scale, compound radius, original Floyd, and name brand pickups for $1000, give or take. Seems like you have to get up into Ibanez's Prestige line or the Jackson USA line to get all that, and then you're paying around $2k.
One important thing about caring for a guitar is keeping the wood supple and moist, and quite often, you have to purchase a separate humidifier block with any guitar. Not this guitar, though. The Cordoba C12 comes with its own humidifier block right in the case. You just have to make sure you keep it moist every week. It is now ranked first on the best classical guitar list.
Good point Gary. The T5 is in a separate category. I found it to be useless as a true acoustic. Thin, weak tone due to its shallow body. Plugged in as an amped acoustic just so-so, and as an electric for rock with overdrive or distortion, pretty good. The Ovations with deep contour bowls, like my Elite 2078, while not so easy to hold, are better at everything, especially unplugged tone, and cost half as much.
The last rating is the value, which gives you an idea of how good a purchase the guitar is for the money. You’d expect most sub-$200 guitars would give you good value for money, while guitars in the $1000 have to work harder to justify their price tags. Finally it’s worth noting that each rating is relative to its overall price. Of course a $2000 Gibson is likely to play and sound so much better than a $150 Squier, but they may both receive a rating of around 8 for features because we keep the ratings relative to the price.

He was barely known for decades after his 1938 death. But the 29 songs Robert Johnson recorded in 1936 and 1937 became holy writ to rock guitarists from Clapton to Dylan. They were dazzled by the way he made a guitar sound like an ensemble – slide and rhythm parts yelping in dialogue, riffs emerging from the mist. Dylan remembered playing King of the Delta Blues Singers, the 1961 LP that rescued Johnson from obscurity: "The vibrations from the loudspeaker made my hair stand up. The stabbing sounds… could almost break a window."
Some of the earliest electric guitars, amps-in-cases, pickups under the bridge, fiberglass guitars, built-in electronic vibratos. Sound curious enough for you? The subject of Supro guitars and amplifiers represents a profitable avenue for exploration by collectors and enthusiasts interested in the many curious and significant byways off the guitar superhighway, which can be enjoyed without having an oil sheik’s bankroll. While National resonator guitars have received superb attention by Bob Brozman, little has been written about this mysterious corner of the Valco universe. Well, with a little help from our friends (in particular, catalogs and invaluable information supplied by Mike Newton, Jim Dulfer, and Michael Lee Allen), let’s set the record straight.

For a slightly more distant, but fuller sound, bring up the fader on the mid- distance mic. Slowly add that signal to the close sound described in the previous paragraph. You'll have the detail of the close mic, but with the fullness that comes with adding some "room" sound to it (just like sitting in the tenth row). This is a pretty standard approach that will give you a pretty standard rock guitar sound.

This Hellraiser C1 guitar features a mahogany body and a quilted maple top and abalone gothic cross inlays. It looks and feels fantastic! A couple of things that make it sound even better are the locking tuners, that keep it in tune, and the EMG noise-cancelling scheme that makes sure that the only sound the guitar makes is the music you’re playing.
Many of the best guitars I saw in my trip to Japan were models made for their own domestic consumption. After World War II, U.S. Armed Forces Radio blanketed Japan with American music. As a direct result, rock and roll, country, bluegrass and American popular music all took strong root in Japan creating a vibrant market for good guitars. Although Japanese players would have preferred to be able to buy genuine American Martins, Fenders and Gibsons, the supply of such instruments in Japan was extremely limited and prices were simply beyond the budget of most of the Japanese population. Japanese manufacturers produced a very wide range of instruments from low-priced student models on up to remarkably sophisticated professional-grade instruments, some of which were better reproductions of vintage American instruments than any of the American manufacturers were doing at the time. These high-end instruments are seldom encountered in the USA because they were priced high enough that wholesalers in the USA did not find them economical to import. Regardless of how good a Japanese guitar of that time might have been, if it cost anywhere near the amount of a new Martin, Fender or Gibson in the USA, there would have been no point in bringing it into this country. For example Tak Inoue, the export director of the Morris Company of Matsumoto, Japan, told me at that time that he had approached Fender to offer them Japanese-made versions of the Telecaster and Stratocaster which he proposed they could import and sell at a lower price that the standard American-made models. He told me that he gave them what he considered to be a very competitive price only to be told that Fender would not be interested since their cost at that time to make a genuine American made Telecaster or Stratocaster in their Fullerton, California, factory was actually lower than the amount quoted by Mr. Inoue. Needless to say, it would appear that CBS, the owner of Fender, had a very good profit margin at the time.
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.

Neutrik has been making superior electronic interconnection products since 1975, making them the logical choice to supply the performance safeguarding jack in Gibson’s 2008 Les Paul Standard. Like many Neutrik products, the jack in the 2008 Les Paul Standard is manufactured from strong, high-grade thermoplastics and housed in a rugged diecast nickel shell. A retention spring inside the jack ensures optimum grip on any guitar cable, thus avoiding the chance of lost connection.

I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers
In all my years I have never seen filter cct's like this but as tleco tech the filters have never been variable, When I put my guitar together I had a 0.022uF and a 0.047uF and for reasons that I have long forgotten I put in a switching matrix that allows me to get 0.047, 0.022 and 0.015uF. After many revisions to the cct (it had coil taping and variable taping) I almost put in a 0.033uF and taking out the switching, well I ended up getting some single ended 9 Watt amp and all of a sudden this flexibility made scene I have one tone control that I can control the cut frequency a coil control pot and a volume control. Now the funny thing If I put in a single cap 0.015uF (as close as you can get) It doesn’t sound like the two 0.022 and 0.047uF in parallel, Its in the harmonics that get let through from what I can hear. But when all said and done could be something to give it a go.

The tip of a soldering iron is very hot, around 700F, and can damage the board, component packages, and wire insulation in a fraction of a second, not to mention your own skin, so be careful the tip does not touch anything as you move it in and out of the soldering area. Put the pencil back in its holder when not soldering. Don’t leave a hot iron laying on a bench or table.
Hybrid picking is a technique that makes use of both the pick and the remaining pick hand fingers. On the surface, it’s more versatile than playing with just with a pick. Digging deeper, you’ll learn hybrid picking has the same, yet different mojo than fingerpicking as well. At the end of the day, this technique is a very powerful one that will enable you to play things that would be otherwise impossible. Be it oddly accented phrases to wide interval licks to more intricate chordal ideas, hybrid picking opens up in credible options.
Ribbon mics exhibit a figure-of-eight pickup pattern. One useful close-mike application for achieving heavy rock sounds involves a ribbon mic (or large-diaphragm condenser set to a figure-of-eight pattern) aimed toward the center of the speaker, with a cardioid dynamic mic angled next to it at roughly 90°, aimed off-center, with the capsules almost touching. Record the mics on separate tracks, and with proper balancing the sound should be powerful and frequency-rich.
no. first of all a bass guitar has 4 strings and a guitar has 6 strings second, u couldn't tune the guitar open notes a whole octave down to create the bass notes as the strings would be too loose. although you can play bass songs on a guitar but it wouldn't be as deep a bass. Actually you can. depending on the kind of way your guitar is built you can remove your guitar strings and replace them with bass strings and finally adjust the setting on your amp so you can have a rich full tone. I have a Fender Squier and made it into a bass by replacing the strings and adjusting the settings on my amp. WARNING: you NEED to know if your bridge or the place where you put the bass strings through can hold the pressure the bass string apply.
This Yamaha Pacifica features a Strat sound that is very good, especially since the humbucker can be tuned into a single pickup by lifting up on the tone control. Like with every other strat, it has a five-way switch which allows the player to select the bridge pickup, the bridge+middle pickups, the middle pickup, the middle+neck pickups, or just the neck alone. In the event that you are tired of the strat sound and you would like to return to Led Zeppelin, simply flip to the humbucker and get set to go!
We're just over the £300 price tag here, but for the shredders and jazz fans out there, the Schecter C-6 Plus in Electric Magenta is a great option, whether you’re a beginner or pro player. It’s one of our favourite cheap electric guitars, and one hell of a performer, featuring professional level appointments inspired by Schecter's  Diamond Series guitars  – this is a monster of tone, and well worth the extra investment.
2. Do your saddles have notches cut into them? If not, then I suspect they could do with some (or if they have, but they're extremely shallow, perhaps they need deepened a little). Just note, however, that this is very easy to screw up and should probably be done by a tech if you're in any way unsure about doing it yourself. Also, you can't just cut a notch in one saddle. You would have to do all of them to the same depth, then raise the bridge a little to make up for the depth you just removed.
You are bidding on a previously owned and in good working condition Blackstar Amplification HT Studio 20H guitar amp head. This auction is for the amp and power cable you see pictured. No footswitch is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. This unit has some scuffs and dings from being moved around. It has been tested and is in good working condition.
The guitar starts off with a basswood body, carved into the familiar Stratocaster double cutaway. Even the pickguard resembles that of a Strat, although the controls are different, with the Adrian Smith SDX just having two knobs for adjusting master tone and volume. While the neck still looks like a Strat, it is meant for fast and comfortable play, with its compound radius maple fretboard, 25.5" scale length, 1.6875" nut width and 22 jumbo frets. Giving this guitar its versatile tones are two single coils for the neck and middle position, along with a humbucker on the bridge, all of which are designed by Jackson with the approval of the Adrian himself.
The vibration of the wood isn't in question at all. It does indeed vibrate and if you put a microphone up to the wood of the guitar as it's being played (and if you can manage the feedback) you'll no doubt hear the tonal qualities of the wood. You can knock on it to hear that. It's like knocking on a door. ANY wooden door or any processed wood for that matter.
{ "thumbImageID": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "defaultDisplayName": "ESP LTD EC-256FM Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "See-Thru Black", "sku": "sku:site51371482100566", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-1371482100566.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Lemon Drop", "sku": "sku:site51335886296183", "price": "429.00", "regularPrice": "429.00", "msrpPrice": "613.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-Lemon-Drop-1335886296183.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-Lemon-Drop/H90046000001000", "brandName": "ESP", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black Cherry Sunburst", "sku": "sku:site51371482100552", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst-1371482100552.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst/H90046000002000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }