Harmonizers – Commonly used for vocal harmonies, these pedals can do a lot to beef up your sound. You can also use them in creative ways, like Steve Vai and Robert Fripp, who have been known to disable the main signal altogether so that their music is coming only from the pitch-shifted output. Using a modern harmonizer can be as easy as setting it to the key you’re playing in, and many even support more than one harmony at once.
Around ’77 or so (since the new shape was similar to the Magnum basses), with sales embarrassingly bad, Ovation took some Deacon bodies and added new contours, carving a dip into the top curve and adding angles. It didn’t help. The Breadwinner was officially axed in ’79, with the Breadwinner loosing its head in ’80, although the market had long passed them by.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.
3) Incomplete sentences due to text running off the edge of the page on page 101, another grievous layout error. You will be paying for the following paragraph "On the next page is a basic single pickup wiring diagram for telecasters using one pickup. this with either the bridge or neck pickup. The pickup will have a volume and tone control. plenty of good sounds with this setup.If you want to play around with the tone, you can or weaker capacitor. Ading a stronger capacitor sends more treble to the ground, and giv bass tones. Note: there are many ways to wire pickups to the pots. This is just one examp "
The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.
The PRS Silver Sky is the result of a close collaboration between Grammy Award-winning musician John Mayer and Paul Reed Smith. More than two and half years in the making, the Silver Sky is a vintage-inspired instrument that is at once familiar but also newly PRS through and through. This model was based off of Mayer and Smith’s favorite elements from 1963 and 1964 vintage instruments, resulting in an idealized version of a vintage single-coil guitar. The attention that was paid to every detail sets this guitar apart.
At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.
Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
Meanwhile, in Sepulveda, Thomas Organ, after importing JMI's British-made amps for a short period in 1964–65, began to produce a line of mostly solid-state amplifiers in the United States that carried the Vox name and cosmetic stylings. With some assistance from Dick Denney, these amps effectively paralleled JMI's own transistorised amplifiers but were different from the British and Italian made Voxes in sound and reliability. To promote their equipment, Thomas Organ built the Voxmobile, a Ford roadster dressed up to look like a Phantom guitar, complete with a Continental organ and several "Beatle" amplifiers. Despite the huge marketing effort, Thomas Organ's Vox products did much to damage the reputation of Vox in the North American market for many years. By 1968, the company had also marketed a line of Vox drum sets (actually made by a German drum company, known as Trixon), which included a kit that featured a conical-shaped bass (kick) drum, that looked more like a wastepaper basket left on its side, and another with a bass (kick) drum, that looked like a flat tire. Such gimmicks did not help sales, and by the early 1970s Vox's American presence was virtually nonexistent.
Alibaba.com offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.
Maple is the most common wood used to make guitar necks. It is very hard and dense, and often has attractively detailed grain patterns referred to as figuring. Maple also has a very bright overall tone. Due to it’s figuring and its tonal characteristics maple is often used for a veneer or top laminate on more expensive solid body guitars. It is also used as a top wood in some archtop guitars, where it is usually laminated. Its hardness brings out the trebles in a guitar's sound. It is also often used for the fretboard where it adds definition to the sound.
Some of the most impressive pieces of equipment come in small packages and in the shape of an item you would not expect to be as good as it is. The proof of this is the deceptively simple looking Mugig Portable Amplifier for Electric guitar, with 10W of power. This piece of equipment is on the big side of small, but is perfect in every single aspect of it, other than the size. The design is simple and understanded, the ease of transport is guaranteed, while the sound takes over the mind and heart of the musician and the crowd instantly. It is possibly the best electric guitar amp that I have gotten to mention on this list.
With that said, it’s important to make a distinction between reverb pedals and echo pedals. These two are often time a source of major confusion. Here’s the deal. Reverb is similar to an echo in a sense that you are hearing the sound as it bounces off a surface. However, reverb is fairly quick and happens almost instantly. Echo effect, on the other hand, takes much longer to reach back to the user. One way to understand the difference is to yell in a smaller room, and then go out and yell in a canyon. Similar goes for delays. If you want to learn more about delay pedals, check out our dedicated guide here.
Decide between mic recording or using a direct box (DI). Recording the sound of your electric guitar by miking your amp is a great way to simulate studio quality sound. However, this will require expensive equipment, like a quality amp, microphone, and potentially sound dampening equipment or material. On the other hand, you can plug your guitar right into a DI to record your guitar.
In 1935, the Dobro Corporation and National Stringed Instrument merged to become the National Dobro Corporation. The Dobro operation moved into the larger facilities of National, however, the two organizations never really reintegrated. Both National and Dobro maintained separate production lines, sales organizations and distributors throughout the rest of their L.A. tenure. Before long, as we shall see, National Dobro would relocate to Chicago while keeping its facilities in L.A. for a few more years. Dobro production would continue in L.A. through ’37 or so, with some leftover parts being assembled perhaps as late as ’39, after which the Dobro name went into hiatus until revived by the Dopyeras in ’59, but that, too, is another story in the Big Guitar City!
Kay was best known for its mid-priced guitars, (i.e., quality guitars priced below top-of-the-line instruments like Gibson and Gretsch models) as well as its budget instruments. Kay made guitar models for its own brand name and guitars branded as Silvertone for Sears, Sherwood and Airline for Montgomery Wards, Old Kraftsman for Spiegel, Custom Kraft for St. Louis Music, Truetone for Western Auto, 'Penncrest' for JC Penney, etc. Also, Kay produced a line of archtop acoustics called Kamico.
In 2013 Vox released updated "G2" versions of the 15 watt and 50 watt heads, and added a combo version of the NT15H-G2 called the NT15C1. Compared to the original NT15H, the NT15H-G2 adds a foot-switchable Girth channel (which first appeared on the original NT50H) with an additional 12AX7 in the preamp section, a "Dark" switch, a digital reverb, and an effects loop. However, Vox did not retain the pentode/triode output section modes from the "G1" version that allowed for full or half power operation as well as a broader tonal palette. The NT50H-G2 differs from the original NT50H with the additions of an XLR D.I. out and a digital reverb, and the deletions of one 12AX7 preamp tube and the "Tight" switch. It also appears the FX loop is no longer bypassable. Gone is the bright chrome look of the "G1" models as both heads received new cosmetics in the form of a black mirror finish on the tube cage and a new suitcase-type handle. Vox also released "G2" versions of their matching cabs: the V112NT-G2 (one Celestion G12M Greenback speaker), and the V212NT-G2 (two Celestion G12H 70th anniversary model speakers), each also sporting the suitcase-type handle. The new NT15C1 combo combines an NT15H-G2 chassis with a single 16Ω 12” Celestion G12M Greenback speaker in a black tolex cabinet with a suitcase-type handle.
Myself, were my budget less than a thousand then I'm dropping a big name like Martin of my list entirely, and probably I'm dropping Taylor too. Seagull makes some solid wood instruments for around $700...no idea how much the electronics tack onto the price, but I'm betting a Seagull SWS guitar with electronics could be had at $900 or so with ...just the slightest of scratches or blemishes.
This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.
When I received this Epiphone LP Special II Les Paul Electric Guitar, Vintage Sunburst I discovered there are cracks in the wooden body, under the paint. I can tell that the wood was cracked before it was painted because the paint flows into the crack in one instance on the back, is visible up over the "shoulder" close to the strap peg and can be seen under the paint on the front. In another instance the paint bridges a crack on back below the cutout shoulder and can be seen under the paint in the right light front and back. Is this normal? (There was no sign of shipping damage on either the outer carton or on the inner product box). Regarding playing, the bass strings buzz on the frets when fretted (not my fingers) which probably can be corrected by adjusting the bridge. I was under the impression that Epiphone guitars were ready to use right out of the box. I have contacted Epiphone/Gibson company to advise on the cracks and the buzzing bass strings. I am concerned that the cracks may get worse, and if this is this normal for a guitar in this low price range made in china. I got a reply from Gibson Customer Service which said "We would need to see pictures, but it would be highly unusual if there actually were cracks in the wood. The set up on an instrument can shift during shipping and handling, so a new instrument may need to be set-up." I will probably return this instrument and buy one in person from a music store where I can see and try the product before buying it.
The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.
People sometimes don't really know what they want and use other brands of amps. They haven't found their sound yet and kind of trying other stuff or heard someone or some artist talking of using it and try. But that is not good enough and then they try a Fender. With a Fender you can create your own sound whether you are using pedals or just using the amp and the guitar. A true wonder for every player. Fender's just the best
Fender guitars are the most popular and are considered as one of the best brands in the world. Fender guitar is manufactured by the Fender Musical Instruments Corporation of Scottsdale, Arizona. They are specialized in making stringed instruments and are best in making the solid body electric bass guitars. Fender Musical Instruments Corporation was incorporated in the year 1946 and is a relatively new company, but with the quality of products they make and the success they achieved, Fender is easily the best guitar manufacturer in the world.
But I’d also like to share my interesting Goldilocks setup into the mix, I’ve had a Boss GT-8 for years and I love that thing for all the control it can give me at the front of stage. However, I’m only 18 and never had the kind of money to buy an amp I’d love to run 4 cables for (or in my case three, I run a Line6 wireless), so I use the virtual preamps and run it into the Effect return of my 6L6 loaded Kustom amp (never liked the preamp in it). This very fact made my gigs in high school extremely easy, as I could use virtually any tube amp with an FX loop as my backline, then adjust the global EQ accordingly to pull the best tone possible, or in one instance I had two amps at my disposal so I got the pleasure of switching up my Delay and Chorus type effects to their stereo modes. I also have a couple of pedals on my board to address a few tonal setbacks I found in the Boss, but that’s only suiting my personal taste. Enjoy my board…
The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.
It is rare for any brand, let alone an entire company, to stay in business this long and their longevity speaks volumes to the exceptional quality of their instruments. Although they did dabble in electric guitars and basses for a short time, today the company is dedicated to making the finest acoustic guitars possible just as they were over 180 years ago.
There is a legitimate physical aspect to the gauge of your strings that will affect how well you play. Bending and fretting becomes much easier and faster with a lighter set, but in my own experience you will have a “tinnier” tone that must be compensated for with your guitar and amp tone controls. Speaking of tone, lets look at how string gauge affects the sound you produce.
Another way to set up your pedals is by placing them within the effects loop of your amplifier. An effects loop is an audio input and output loop that is placed after the preamp and before the power amp section of your amplifier, using the Effects Send and Effects Return jacks. On some amplifiers, these can be labels Preamp Out (Effects Send) and Power Amp In (Effects Return). Not all amplifiers have effects loops, but those that do allow for you to place some of your effects within the loop.
Particularly if you want to get into recording and production, this Blackstar model is ideal. With six distinct “voices” from Clean Warm to OD2, as well as 12 stereo effects, there is a huge range of tones and options to play with. Together with the patented ISF control it allows for a nuanced choice of timbres, allowing you to immerse into exactly the sound you are after in gloriously deep Super Wide Stereo.
Now that you know a little bit of history behind the electric guitar, let’s dive into some of the different types of electric guitars that you can find at Sam Ash. You may be thinking to yourself, “Why are there so many different types of electric guitars?” The reason is this: each and every type of electric guitar serves a unique purpose and will cater to various types of playing styles and musical genres.