“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”

The more pedals you collect, the more you should consider investing in a pedal board as well. Some pedal boards are simply that – boards – to which you can stick your stompboxes to keep them organized. But you can also get powered pedal boards, which have built-in DC power supplies. That means no need for batteries or individual adapters connected to each pedal: just tether them to the central source, and you can power them all up by plugging the pedal board into a single outlet.

Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.

But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
To celebrate the new generation of shredders profiled in our May/June “Loud Issue,” the SPIN staff decided to find some wheedle in a haystack, taking on the impossible task of ranking our favorite guitar players of all time. Traditionally, the “greatest guitarist” timeline begins with Robert Johnson magically conjuring the blues, nears perfection with Eric Clapton mutating it beatifically, and then ultimately reaches a boomer-baiting Rock and Roll Hall of Fame apotheosis with the free-spirited Jimi Hendrix shooting it into space like feedback-laden fireworks. For this list, we veer toward the alternative canon that kicks in with the Velvet Underground trying to erase that form entirely, making guitar solos gauche and using instruments as sadomasochistic tools for hammering out sheets of white heat.
You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc.
Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.
If you are looking for a guitar that is not only surpassing quality levels but also looks classy, Gretsch is the one you require. The company certainly makes some genuinely beautiful instruments that appeal your eyes. Although, some Gretsch guitars come with a considerable price tag, yet they certainly worth the money. Likewise, you can also find several hollow and semi-hollow body guitars at Gretsch that are quite affordable. It means every player from all levels will surely find something of their interest over here.

For players that want to start off purely in the world of metal playing, this Schecter bundle should be right up their alley. The guitar itself has a lovely midnight satin black finish, with ready access to its 24 frets thanks to a generous cutaway. The dual humbucker pickups will put out plenty of power as well, allowing for more extreme styles of music to be played with ease. This particular set skips the accessories in favor of a mere amp, gig bag, and instrument cable, but the quality of the main instrument makes up for the omission of picks and the like.
If you do record the bass both via a DI and a miked-up cab, and combine them later, as suggested above, you’ll want to pay attention to the relative phase of the two tracks. Even if the mic is placed very close (an inch or so) to the amp’s speaker, that track will still be slightly delayed (on the order of milliseconds), due to that small distance, relative to the DI track. Small delays like this can cause comb-filtering when the tracks are combined (at close to equal levels), which produces cancellations and reinforcements in the frequency spectrum that can impart a nasal, hollow, or slightly “flangey” sound, weakening the tone. You can see the time difference if you line up the waves in the DAW and zoom way in. You can either advance the amp track (via editing) or delay the DI track (via editing or a plug-in) until the two line up—the resulting tone should be fuller, and ultimately sit better, with a more solid low end, in the mix.
Introduced around the same time as the White Falcon, the Duo-Jet (6128) became another hit for Gretsch, especially after a young George Harrison played one with The Beatles in the early sixties. While finding an original Gretsch is very expensive, the brand still makes faithful reproductions of most of its historic models and are popular with guitarists with a penchant for vintage.
The final spot in our top 5 list goes to the DigiTech RP500, the second-largest of the DigiTech RP line of multi-effects pedals, but definitely the most popular out of the lineup. Like Boss and Line 6, DigiTech is no stranger to making very good guitar effects. Their parent company Harman also owns Lexicon, famed for their top-of-the-line reverb sounds, which DigiTech very much benefits from. The DigiTech RP500 is a multi-effect unit with amp modeling, a looper, USB connection, and an onboard expression pedal. Out of the 5 pedals on this list, it draws the most comparisons to the Zoom G3X and the Boss ME-80 (both in terms of price and features). Throughout this review we’ll make sure to cover how it stacks up against those.

With the die-cast chrome tuners, you get to ensure that your guitar never gets out of tune. The natural finish and large pickguard make this instrument a true classic. You can play this acoustic instrument as it is, or plug it into a PA and let the System 53 piezo pickup amplify its sound. You also get a preamp with 2-band EQ for more control over the tone and volume.

In 1932, John Dopyera left Dobro and came back into the National fold, regaining control of the company. We can only speculate that the absence of Beauchamp has something to do with his decision. National and Dobro merged in 1935, becoming the National Dobro Company. However, until the end of the ’30s, when National Dobro finally completed its relocation to Chicago, Dobro instruments continued to be made in L.A. by what had been the separate Dobro Corporation, even though it was a part of National Dobro. Got it? Hmmm…
Roger McGuinn worked with C. F. Martin & Company to develop a seven-string folk guitar. McGuinn’s guitar (the D7) is tuned the same as a standard folk guitar with steel strings, but the third (G) string is augmented with a harmonic string one octave higher. The intention was to offer the six-string player the chance to play “jangly” twelve-string style lead guitar.

While electric bass players have used regular guitar amplifiers in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
If you prefer the Linux platform, then Guitarix is your best free guitar effects solution. It is a free, full featured guitar amp and effects software. Aside from its impressive amp modeling capabilities, Guitarix has 25 equally impressive effects modules. Effects include a noise gate, modulation effects like flanger and phaser and it even has weird stuff like auto-wah. Guitarix's low latency audio engine ensures respectable audio, which is said to give you not more than 10 milli seconds of delay. This is a simple yet effective guitar effects software, unfortunately it is only available for Linux users.
Vox had experimented with Japanese manufacturers at the end of the sixties with the Les Paul style VG2, and in 1982 all guitar production was moved to Japan, where the Standard & Custom 24 & 25 guitars and basses were built by Matsumoku, the makers of Aria guitars. These were generally regarded as the best quality guitars ever built under the Vox name. However, they were discontinued in '85 when production was moved to Korea and they were replaced by the White Shadow models, although a number of White Shadow M-Series guitars and basses are clearly marked as made in Japan, suggesting a phased production hand-over.
While a high school degree is not necessarily required, it does provide an edge for graduates who wish to become guitar technicians. Students should concentrate on classes such as music, band, English, shop class and mathematics. A major part of any education should include guitar lessons. Techs often need to be able to play by ear and must be able to pick up on any nuances in an instrument's sound and tuning.
Fret gauge might have a bigger impact on playing feel than on tone for many guitarists. Wider frets are often attributed a smoother, more buttery playing feel, which also makes it easier to bend strings. Ease of bending is also enhanced by taller frets, whether wide or narrow. Narrow frets shouldn’t be too hard to bend on, unless they are badly worn down, and they also leave a little more finger room on the fretboard—particularly in the higher positions— which might suit some players better.
I liked that the test used identical setups and that the results were captured on a high resolution display. Often the debunkers use either their ears alone (and in a MP3 format as well for us to compare) or an oscilloscope which is a terrible measuring device for real sound because it can only display time and amplitude where the amplitude is a summed view of all the frequencies at the same time. The FFT clearly showed much much more.
{ "thumbImageID": "JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000", "defaultDisplayName": "Jackson JS22 Dinky DKA Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Oil", "sku": "sku:site51500000033288", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Natural-Oil-1500000033288.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Metallic Blue", "sku": "sku:site51366901765023", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue-1366901765023.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue/H97609000002000", "brandName": "Jackson", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue/H97609000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Black", "sku": "sku:site51366901764897", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Satin-Black-1366901764897.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Satin-Black/H97609000001000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Satin-Black/H97609000001000-00-60x60.jpg", "imgAlt": "" } ] }

In 1962 Vox introduced the pentagonal Phantom guitar, originally made in England but soon after made by EKO of Italy. It was followed a year later by the teardrop-shaped Mark VI, the prototype of which was used by Brian Jones of The Rolling Stones. Vox guitars also experimented with onboard effects and electronics. The Teardrop won a prize for its design. In the mid 1960s, as the sound of electric 12 string guitar became popular, Vox introduced the Phantom XII and Mark XII electric 12 string guitars. Vox produced many more traditional 6 and 12 string electric guitars in both England and Italy. It may be noted that the Phantom guitar shape was quite similar to that of first fretted electric bass guitar, the Audiovox "Electric Bass Fiddle" of 1934.
1) Mic your guitar cabinet, running the mic signal into a simple mixer with your effect units patched in on effects sends and returns. Run the mixer into a power amp and full-range speakers, or powered full range monitor speakers (the “wet” cabinets), placed on either side of your dry cabinet. Set the effects units 100 percent wet and blend in the amount of effect you want into the wet cabs. Use a MIDI foot controller to change presets on the effects units, and add an expression pedal to control things like the output volume of the effect signal, or the feedback of a delay. For live applications, the soundman can mic your dry cabinet separately and take a stereo line-out signal from your mixer for the effects, panning the effected signal hard left and right in the PA. Guitarists such as Eric Johnson and Larry Carlton have used this approach.
The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?
Before Gruhn Guitars puts out any of our fine instruments for sale, they go through our repair shop to get them ready to play. Some older instruments require extensive repairs and restoration, while others just need new strings and basic setup. But every guitar, mandolin and banjo has to meet the high standards of the repair crew before it's released for sale. Our repair staff has over 75 years combined experience repairing, restoring, building and designing guitars.
Johnny Marr: I'd already played a couple of shows before that with a couple of bands. I'd been in a couple of bands before I met Andy, even though I was fourteen or fifteen at the time. We met in school, Andy and I. I'd been playing in these little kid's kinds of bands at twelve and thirteen. When I got to fourteen and fifteen, I got invited to play in a couple of bands with much older guys.
Yamaha continues to rank highly in the entry to mid-tier guitar market, thanks to their student friendly instruments. I for one took classical guitar lessons with a Yamaha classical that still plays and sound great up to this day. As expected, they have an entry in this affordable price range category, in the form of the 3/4 size JR1, which is essentially a smaller version of Yamaha's popular FG acoustic guitar.
Why We Liked It - Given the price, the hardware, and the attention to detail, this would undoubtedly be a contender for one of the best all-round choices on our list. There aren’t many other options that come from a premium manufacturer and give you all this for such a good price. The looks however will divide opinion. This is a must consider if they’re to your tastes however.
Cole Clark guitars are made largely using Australian indigenous timbers. Solid timber is used in preference to plywood.[2] Clark’s discovery of the best type of wood for his guitars came whilst searching in Australia in 1998. He came across Bunya Pine, and found out that it had the perfect characteristics for the sound board on an acoustic guitar. Whilst researching this type of wood, Clark also discovered that Bunya is about 18% stronger than Spruce wood, which a traditional choice when constructing a guitar. Blackwood is also another favourite material of Cole Clark’s for building their guitars (http://www.coleclarkguitars.com/technology.asp).
OK, I’ve put a new set of strings on now. We’re now going to carry out the following steps, just like we did in the general electric guitar setup post. 1. Check and adjust neck bow (how straight the neck is) 2. Check and adjust saddle height 3. Check and adjust the intonation (how far back or forward the saddles need to sit at the bridge to keep your guitar as in tune as possible no matter what fret you’re playing)
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.
The Hi-Flier guitar, which was possibly built in the Matsumoku factory, underwent multiple phases during the course of its production. Each of the Hi-Flier’s four manufacturing phases came with a variety of feature changes, ranging from simply switching the color of the pickguard to actually fitting the guitar for humbuckers rather than the P90-style pickups it originally came with.
The Duo-Sonic is a short-scale student model that has become highly prized for its excellent playability and tone, making it one of the best electric guitars for beginner guitarists with cash to spare. This updated model - with its slab alder body, flawless in sparkly Surf Green - features the classic offset Fender waist that gives the series its name. The three-ply white/black/white scratchplate also plays host to a chrome-tipped three-position pickup selector switch and knurled (aka easy-grip) volume and tone knobs servicing two pickups, a neck single coil plus a bridge humbucker. The latter is also coil-splittable via the push/pull tone knob. We've encountered guitars at more than twice the price that don't play anywhere near as well as this thing does. Oh, and it doesn't matter what size your hands are. If we had to use a song to describe the tonal range of the bridge pickup, we'll have Smells Like Teen Spirit, please. A clean setting here echoes the clattering rhythm voice of the song's intro while a fuzz box unleashes a racket not unlike the heavy sound Kurt craved. If it sounds like we're typecasting this guitar then rest assured the Duo-Sonic is versatile enough to handle country picking, surf, indie, classic rock, whatever. Plus, the neck pickup warms things up perfectly for clean or dirty blues lead or jazz chords.
Despite starting life in Turkey in 1873, Epiphone is actually one of America’s oldest and best-loved musical instrument producers, having moved to this side of the Atlantic in 1903. Although the brand had been making acoustic guitars since 1928, Epiphone was acquired by Gibson in 1957 and soon began producing wallet-friendly versions of Gibson’s most famous models.
There are a lot of different kinds of guitars (acoustic, semi-acoustic, electric, steel etc.) but some companies make a wide variety. Here's a list. . Fender (Mine) . Ibanez (Mine too) . Epiphone (Also Gibson plus the kids version is Maestro) . Dean . Some good acoustic companies are . Alvarez (Also mine) . Crescent . You can visit the websites for these companies. Hope I could help!
In 1958, Gibson introduced the ES-335 as part of its Electric Spanish line of guitars, and it was the world’s first commercially released semi-hollow guitar. Featuring a solid center block in an otherwise hollow thinline body, the then-radical design effectively combined the round, airy tone of a traditional archtop with the sustain and feedback-fighting benefits of a solidbody. Its groundbreaking design is one of the most imitated around.
Taylor also has a Build-To-Order program that allows anyone to design their very own guitar. There’s an extensive menu of guitar options starting from tonewoods, including species and grades that aren’t offered through Taylor’s standard line; inlay, binding and purfling options; finish options such as solid colors, sunburst, or vintage finishes; wood accents like a backstrap, armrest or truss rod cover; neck options such as scale length and neck profiles; and finally body shapes including the deep-body Dreadnought and the new Grand Orchestra.
The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.
The Boss Waza 212 Guitar Amplifier Cabinet has been specially designed as a partner to the awesome Waza Amp head. Packed with 2 custom made 12 inch speakers and ready to roar! You can even select whether you want the back to be open or closed, allowing you to make whatever sound you want! If you want extra speakers, there's also the Boss Waza 4x12 Guitar Amplifier Cabinet with 2 x 12" speakers to pump out your riffs with.
The Effect:Chorus is one of the most recognized pedal effects, dating back from the beginning of the 70’s, and later on popularized in the 80’s, it was the most used effect on guitar pedals back then, and no guitarists dared to step foot on stage without the classic Boss CH-1 Stereo Super Chorus Pedal or MXR Micro-Chorus, to name a few. Originally, Chorus pedals came in Analog form, however today the market is mixed with both Analog and Digital pedals, with the difference between the two being that Analog modifies the signal directly, while Digital takes the original analog sound coming from your guitar, converts and modifies it into digital form, before finally converting it back to analog form prior to its release.

• Now let's add some slap-back room delay. In the seventh insert (which, incidentally, comes post‑fader in Cubase, as does insert eight), go to Delay/StereoDelay. In the left channel, try setting Delay to 1/16T, Feedback to 6.5, Lo to 50, Hi to 15000, Pan to ‑100, and Mix to 20, and enable Sync, Lo Filter, and Hi Filter. Use the same values for the right channel, but with Delay at 1/16, Feedback at 7.3, and Pan at 100.
So much has changed since our last refresh – where do we begin! First we answered some common questions that you might have. Then we reviewed our top ten chart and individual categories, and removed several older models including the Gibson Les Paul Faded T 2017, Epiphone’s G-310 SG, and the ESP MH-50. We added many others including one of the greatest guitars ever made, the Ernie Ball Music Man John Petrucci Majesty Monarchy, the premium Fender Eric Clapton Stratocaster, the Yamaha RevStar RS420 and Mark Holcomb’s signature PRS MHHB2 SE.
In addition to modern versions of tricones and single cone resonators, National Resophonic also produce Dobro-style guitars. This company made the Model D during the latter part of the 2000s. Production of the Model D guitar has now ceased, but a few dealers in the UK and USA have stock available. National Resophonic are now producing their Smith & Young `Spider Cone’ models and the Model 11 is built on traditional Dobro lines. Also, Goldtone, Paul Beard and a number of custom builders are producing good guitars.
We are your Vintage Pickup specialists.   We have cornered the market of manufacturing the most accurate vintage pickup reproductions to which can not be equaled.  Our process is to chemically analyze an original pickup magnets and wire, then we reproduce them with the exact same magnets and wire.  We don't use stock magnets or wire.   We don't degauss magnets and say they are vintage.  Our magnets are only as strong as the elemental composition will hold.  Our wire is specially manufactured for us, we have many batches of wire with all different types of resistances and O.D.'s.  Our wire also is processed differently than modern conventional wire, these little details are what makes the Klein Pickups Reproductions the most accurate in the world.   We have a full array of models that we reproduce.  Check out our site for the full list of all of our offerings.   As a small business we always appreciate your business & support.  -Thanks
Home>Guitars, Amps, and Effects >Electric Guitars PrintRefine your searchBy CategoryElectric Guitar Bags (55)Electric Guitar Cases (94)Electric Guitar Packs (5)Electric Guitar Parts (99)Electric Guitar Pickups (203)Electric Guitars: 6-String (946)Electric Guitars: 7-String (59)Electric Guitars: 8-String (13)Electric Guitars: 9-String (1)Electric Guitars: 12-String (5)Electric Guitar Strings (112)Electric Travel Guitars (2)Left-Handed Electric Guitars (70)Signature Model Electric Guitars (55)By BrandBabicz (8)Charvel (28)D'Addario (35)D'Angelico (33)Darco (1)Dean (34)Dean Markley (2)DiMarzio (39)DR Strings (10)Dunlop (3)Elixir (10)EMG (42)Epiphone (88)Ernie Ball (41)Ernie Ball Music Man (30)ESP (86)EVH (13)Fender (176)Fishman (39)Fret-King by Trev Wilkinson (3)Fusion (1)Gator (23)GHS (6)Gibson (167)Godin (2)Graph Tech (9)Gretsch (58)Guild (11)Hagstrom (15)Hamer (5)Ibanez (166)Jackson (78)Kramer Guitars (4)Levy's (2)Line 6 (6)Mojotone (35)Mono Cases (9)On-Stage (3)Peavey (1)Planet Waves (1)PRS Guitars: Paul Reed Smith (62)Reunion Blues (8)Reverend Guitars (11)Schaller (2)Schecter (77)Seymour Duncan (75)Silvertone (3)SKB (13)Squier (27)Steinberger (3)Sterling by Music Man (17)Supro (3)Taylor Guitars (7)TKL (5)Tronical (3)TV Jones (7)Ultimate Support (1)Vorson (1)Washburn (1)World Tour (8)Wylde Audio (6)Yamaha (5)Play as you Pay® Eligible4-Payment Plan (1022)6-Payment Plan (1133)8-Payment Plan (1053)12-Payment Plan (856)By Price$0 - $24 (154)$25 - $49 (25)$50 - $74 (23)$75 - $99 (107)$100 - $149 (132)$150 - $199 (93)$200 - $299 (100)$300 - $399 (80)$400 - $499 (92)$500 - $749 (210)$750 - $999 (267)$1000 - $1999 (304)$2000 - $2999 (99)$3000 - $3999 (66)$4000 - $4999 (35)$5000+ (13)Availability In Stock Items (1549)Clearance Gear (278)By ConditionNew (1631)Warehouse Resealed (11)Blemished (256)Scratch and Dent (22)Viewing products that ship to: Customer Kudos "The extended payment plans at zZounds are superior to the other online retailers. The others require you to have a credit card issued by them. Also I've never had a problem exchanging or returning defective gear and the exchange item is in the mail once the returning item is picked up by the shipper." - Customer on October 14, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories
The Effect: Expression pedals are nowhere near as popular as some other guitar effects. However, they have the power to make or break your guitar tone, depending on how far you are willing to go. At their very core, expression pedals are nothing more than a potentiometer in a pedal form. They can be as simple as that, which is represented beautifully by the Mission Engineering Inc EP­1, but there definitely are more advanced designs available. The purpose of an expression unit in your signal chain is to give you more control over equipment which supports this kind of accessory. We’re talking rack mounted effects, digital processors, guitar effects pedals and more. In some cases they are downright necessary, but in most they offer a whole new level of control over the effect in question. Despite their inherent simplicity, finding a good one still take some effort, lots of research and planning.
The two piggyback guitar amps included the 1010 Guitar Amplification System ($605), which offered 10 tubes, 105 watts, two channels, four inputs, volume, bass, middle and treble controls for each channel, presence, reverb, tremolo, variable impedance, and a cabinet with eight 10″ Univox Special Design speakers with 10-ounce ceramic magnets and epoxy voice coils. The cabinet grille had eight round cutouts. The 1225 Guitar Amplifier System ($435) had eight tubes, 60 watts, two channels with the same controls as the 1010, and a cab with two 12″ Univox speakers with 20-ounce ALNICO magnets and 2″ voice coil. The grille had two large round cutouts with two small round cutouts on the sides. The amps had handles on the top, the cabs handles on the sides, to make life easier for your roadies.

Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
In 1959, with sales under pressure from the more powerful Fender Twin and from The Shadows, who requested amplifiers with more power, Vox produced what was essentially a double-powered AC15 and named it the AC30. The AC30, fitted with alnico magnet-equipped Celestion "blue" loudspeakers and later Vox's special "Top Boost" circuitry, and like the AC15 using valves (known in the US as tubes), helped to produce the sound of the British Invasion, being used by The Beatles, The Rolling Stones, The Kinks and the Yardbirds, among others. AC30s were later used by Brian May of Queen (who is known for having a wall of AC30s on stage), Paul Weller of The Jam (who also assembled a wall of AC30s), Rory Gallagher, The Edge of U2 and Radiohead guitarists Thom Yorke, Jonny Greenwood and Ed O'Brien. The Vox AC30 has been used by many other artists including Mark Knopfler, Hank Marvin who was instrumental in getting the AC30 made, Pete Townshend, Ritchie Blackmore, John Scofield, Snowy White, Will Sergeant, Tom Petty, The Echoes, Mike Campbell, Peter Buck, Justin Hayward, Tom DeLonge, Mike Nesmith, Peter Tork, Noel Gallagher, Matthew Bellamy, Omar Rodriguez-Lopez, Dustin Kensrue, Tame Impala, and many others.
In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson had developed prototype combo amps, but never them. By 1935, Electro/Rickenbacher had sold more amps and electric guitars than all the amps and electrified or electric guitars that had been made from 1928 through the end of 1934.[1]

Štěpán Rak and Kazuhito Yamashita have also generalized the use of the upstroke of the four fingers and the downstroke of the thumb (the same technique as in the rasgueado of the Flamenco: as explained above the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side) both as a free stroke and as a rest stroke.[41]

Your budget – When it comes to the best electric guitars or really any real instrument in general, you’re going to have to pay a decent amount of money if you want a quality investment. Although we did find a few budget-friendly guitars to take a look at below, a lot of these will near the half-a-thousand mark and beyond. It all depends on you, of course. Do you want a beginner and starter electric guitar to begin those shredding adventures? Or perhaps the best of the best that the most famous artists use? Perhaps you’ll end up saving more than you already have as you’re reading this — it may be worth it to wait a bit longer.
I inherited a guitar and am looking for any information I can about it. It is a Kent model 533 Videocaster. I have no idea when they were made or what this one might be worth. It is a solid body, but I know next to nothing about guitars so I am not sure what other info might be needed. It needs to be tuned/serviced and possibly needs a little restoration, but otherwise it works and is not in horrible shape. Any info would be appreciated.
With the new Shreddage 2X update released in July 2014, S2 is better than ever. Enjoy a brand-new user interface and totally rewritten engine, with intelligent string / fret selection, new features and options, even more customizable mapping, and new samples like powerchord slides and staccatos. You can also use new built-in effects pedals and save/load your own custom presets to use across multiple projects.

Ovation Instruments is a Division of Kaman Corporation, a major supplier to the United States government of military helicopters, rescue equipment, electronic components and other aerospace products. There are eight divisions of Kaman, participating in such diverse industries as commercial transportation, nuclear sciences, space medicine, education and social sciences, oceanography and, most recently, recreation.

{ "thumbImageID": "F335-Acoustic-Guitar-Black/512940000001000", "defaultDisplayName": "Yamaha F335 Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274115033905", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Black-1274115033905.gc", "skuImageId": "F335-Acoustic-Guitar-Black/512940000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/F335-Acoustic-Guitar-Black/512940000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51274115034006", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Natural-1274115034006.gc", "skuImageId": "F335-Acoustic-Guitar-Natural/512940000010000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/F335-Acoustic-Guitar-Natural/512940000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115033955", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Tobacco-Brown-Sunburst-1274115033955.gc", "skuImageId": "F335-Acoustic-Guitar-Tobacco-Brown-Sunburst/512940000337000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/F335-Acoustic-Guitar-Tobacco-Brown-Sunburst/512940000337000-00-60x60.jpg", "imgAlt": "" } ] }
I was lucky. Went into to a small local music store and they had it for a long time and were trying to get rid of it quick. Got it for about $800. The previous Rick 12 I had (with narrow neck) I bought for $400, fixed broken nut, then sold to West LA Music for $750 cash so I could get the Petty model. Transactions that were definitely worth it at the time.

These are great choices, but if you want a great guitar for the price go used and get either esp ltd ec400vf or the ec401vf. They come w seymour duncan 59 neck and jb bridge or dimarzio pickups. Grover tuners jumbo frets set neck mahogany neck and body. You can find em used for $300-400 and need absolutely nothing but to be plugged in. The ec256 is a great option but for the same price get the 401 used. I have a 65 jaguar a newer mustang 2 epi's 1 paul 1 SG and when I picked up the ec401vf for $300 it was the best value to quality ratio I have ever had in a guitar. You won't be disappointed. The ec400 series were also made in s korea and the earlier 401s were made there also. The newer ones are made in China and Indonesia but the quality is still incredible. I got a s korea model ec401vf w seymour setup. It smokes my epi l.p. tradional pro and was $250 cheaper. By far best deal it there.

We round off this list with a relatively modern innovation in the world of acoustic guitars; the ‘baby’ acoustic. As usual, Martin and Taylor have led the way with these particular guitars, which are effectively shrunken down dreadnoughts which focus heavily on their portability and the wide range of musical scenarios in which they can be used. Martin had dabbled in this world before, with its rather odd looking Backpacker, but it was with the LX1 – and Taylor’s subsequent Baby Taylor – that the world began to take note.
Some guitars have what is called a push-pull knob where pulling the knob will change a setting, or access a different setting. For example, some guitars have one knob when pulled will turn the bridge humbucker pickup as if into a single-coil pickup, which is known as a coil-split. Some guitars like ones from Fender have what is called the Fender S1 switching system where pushing a knob will alter the behavior of the pickup selector.
Despite what the Peate copy says, these instruments are not Dobros, but rather Supros. The guitars and mandolin shown in the Peate catalog are identified as being “The New Dobro Electric Guitars,” part of National Dobro electric guitars. However, the No. 1 Hawaiian shown is clearly the Supro frying pan (recall that the Hawaiian in ’35 was the fancier Dobro), and the No. 2 Spanish Guitar and No. 3 Mandolin are clearly labeled “Supro.”
What every great guitarist does, with respect to sound, is achieve a very high level of nuanced control over the sound, not by having a computer play his guitar for him. As a keyboard player, I would recommend you first concentrate on playing your synth with lots of use of pedals, velocity-sensitive changes in timbre, and left hand controllers. Then you can experiment with all sorts of synth sounds. This way, you can play as expressively as a gutarist, but without sounding like a bad copy. Instead, you can sound like something different, new, and this is really where synth lead work can shine (and actually add to our musical lexicon).

First of all, let’s clear up some minor confusion over the name. It has been variously reported, including by me, that the name “Teisco” stands for the name of a company in Tokyo; however this is not the case. Teisco was simply the name chosen by one of the company’s founders, Mr. Atswo Kaneko. There was another prominent company called the Tokyo Sound Co., Ltd. which was responsible for making Guyatone guitars, another major early Japanese brand, some of which came to the United States as Kent guitars imported by New York’s Bugeleisen & Jacobson and others. However, neither of these companies or their guitars had anything to do with the Teisco brand.
Likewise, six Folk/Country Western guitars were offered, with flat, corner-notched heads, belly pin bridges and tortoise pickguards. The 14″ GS240 Concert ($79.50) was a Spanish shape with natural spruce top, mahogany body, and dot inlays, presumably on a rosewood fingerboard. The 15″ GS350 Grand Concert ($99.50) was another Spanish with natural spruce and figured Brazilian fruitwood body, with diamond inlays and wood rope binding. The GS380 Grand Concert ($109.50) was the same as the GS350 except for a Brazilian rosewood body. The GS460 Country Western ($129.50) was a 16″ dreadnought with a spruce top in red sunburst, cherry-finished mahogany body, a black pickguard, sort of mustache bridge, diamond inlays and white binding. The 16″ GS570 Auditorium ($149.50) was another dreadnought with yellow spruce and full grained Brazilian rosewood body, diamond inlays and fancier rosette. The GS680 12-String Auditorium ($185) was another 16″ dreadnought 12-string otherwise the same as the GS570.
Another cool place I just found was Madison Guitar Repair out of Fridley. I went there a couple weeks ago. It's a little hole in the wall place where they just work on guitars and have tons of parts. Really nice guys that seem like they know their stuff pretty dang well. Never used them but considering that all they do is luthier work I'd give them a shot.

With 24 amp models including a digital chromatic tuner, 9 stomps boxes, 4 amps, 5 cabs, 3 mics, and 2 rack effects; AmpliTube Custom Shop is a great way to get your hands on IK Multimedia's great guitar simulation software. As the name suggests, in addition to the free units you can purchase more effects units from right inside the plugin to build your own custom guitar shop.
King V has got to be one of Jackson’s most iconic guitar families. The one we are looking at here is a but underpowered compared to the original King V, however it also comes at a much lower price. The whole package is well made and quality control is top notch. It takes some time to get used to the Flying V body shape, but once you do you’ll refuse to go back. Aside from looking good, this thing also brings a mighty sound.
Nitrocellulose lacquer is prized as a coating by some guitarists as it is thinner than some other coatings, which some claim leads to a better sound (though we’re not going to wade into that argument here). It’s also easy to blend with paints, and easier to repair. It does have its downsides, however. The solvents used in the lacquer can be potentially damaging to the respiratory systems of workers applying the coating during the guitar’s manufacture, and for this reason other options were sought.
The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.
I ordered this for my 6 year old nephew for Christmas. He wanted one because I had just recently bought my 3rd. I thought a smaller one would be nice for him to start learning. Just opened the box and the amp doesn’t work! At all! Light turns on but nothing else happens! Hooked guitar up to my own amp and it sounds nice so it’d definitely not the guitar or cords fault. Trying to get a replacement but no luck.
This diagram shows 3 single coils wired in parallel, allowing seven tone choices. The typical 3 single coil guitar contains a 5 way rotary switch which allows you to get 5 sounds - each single coil; neck and middle in parallel and middle and bridge in parallel. This modification will give you 2 more sounds - all 3 pickups in parallel and Neck and Bridge in parallel.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
{"pageName":"[mf] pdp: epiphone les paul special vintage edition electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"silver,36-month,24 month","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";J40301","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] product detail page"}
Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
MY kid brother has been playing drums since he was a kid , until I snuck him into a bar at 15 one night and he set in with the house band , he played all my music. He was good so he & the lead guitarist clicked & they released a CD that took off & then the guitarist was killed , my brother got a doctorate in music and has played on several good CD's , MTB being but one. he can now play nearly everything and has released two more CD,s ,and owns his own studio , me I'm only an electrician but I understand Harmonic heating in electronics . its right that a watt is a watt,& it's a way to measure power & its sold in kilowatt hours, but even though a watts is a watt when measured, its a measurement of energy , it still depends on how it's used as to how far it goes or what you get from it ,it has a lot to do with how clean or distorted it is as to how loud it seems , people will perceive it differently , the only way to find to find how loud ? a decibel meter, another measurement .
Along with Taylor, C.F. Martin and Co. sets the mark for top-level American-made acoustic guitars. They’ve been around since 1833, and today they make most of their guitars in Nazareth, Pennsylvania. They use premium materials to get the best look and sound out of their guitars, but they’re also a leader in understanding the environmental impact of over-harvesting tonewoods.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Natural
To find which Ernie Ball strings are right for you, the key is experimentation. Figure out which strings sound best to your ear, feel best on your fingers, and most importantly enable you to create the music you want. When you are ready to buy, head over to one of the 5,500 music stores that carry Ernie Ball products. You can discover these stores by visiting our Store Locator.

This is the first defined price range that is worth talking about. Here's where you run into some pretty decent guitars that pack a lot more value for being just beyond the beginner's tier. Even so, there are also a lot of guitars here which simply aren't worth the price, no matter how good the marketing. We've tossed those out the window and are only sharing the two models we know deliver the goods.
The brands we talked about today are considered to be the most trusted on the market. Even so, you might want to skip the bare-bones entry level models as those are bound to come with a flaw of some sort. We showed you a number of guitars from each of the brand’s current lineup. Those represent well rounded and balanced choices for beginners and intermediate players alike.

Pickups are complex devices. No matter what we do, we cannot model them with spot-on accuracy. They do have a series resistance (R6), but the L1 and C3 inductor and capacitance, respectively, but these are not real circuit components, but are a simple model placeholder for the complicated interactions that appear due to Maxwell’s equations, when we have a wire wound around magnets (see below image):
Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).
Jump up ^ "New Sales Avenue Opened with Tone Amplifier for Stringed Instruments". The Music Trades. October 20, 1928. This tone amplifier is electrically operated either by alternating or direct currents. It consists of two major units -- an electro-magnetic pick-up and amplifying unit. The electro-magnetic pick-up is built within the instrument and is attached to its sounding board. The unit is connected with the amplifier, which produces the tone and volume required of the instrument.
I have one of these and what I like about this guitar are the little touches. The arch top and binding helps set it apart from other guitars around this pricepoint, as does the black chrome hardware. Schecters are enormously comfortable guitars to play and their finish work is excellent. This is a lot of guitar for the money, but you can upgrade twice within $500 with the Omen Extreme-6 and the Omen Extreme-6 FR, depending on your needs. After owning mine for a few years, I tossed a couple of Seymour Duncan Antiquity pickups in it to give it a serious upgrade and more longevity.
Near the beginning of Epiphone's thinline semi-acoustic range is 'The Dot', based on the timeless and legendary Gibson ES-335. The Dot feels comfortable to hold and play, and the neck, while by no means clubby, feels substantial in your palm, probably due to the 43mm width at the nut. Its slightly flattened C-profile increases marginally in depth further up the neck, making for a suitably vintage feel. An acoustic strum issues forth a pleasing, resonant ring. We'd wager that the Dot's all-maple construction has got something to do with that, but more obviously, the hollow bouts bolster the acoustic tone, inducing wry smiles to those listening. Before plugging in, listen to Ronny Jordan, then Noel Gallagher, then BB King, then George Harrison and John Lennon. It becomes immediately apparent that this style of guitar is hugely versatile. This Dot is no exception: the pickups, while not packing the punch of USA PAFs, offer everything form smooth and moody, front-position mellowness to screeching, bridge position rawk. It's one of the best electric guitars for jazz at this price point, too. The Dot looks fine, sounds great and plays great. To our minds, that's value for money indeed.
The “quacky” tone of the middle and bridge pickups, popularized by players such as David Gilmour, Rory Gallagher, Mark Knopfler, Bob Dylan, Scott Thurston, Ronnie Wood, Ed King, Eric Clapton and Robert Cray, can be obtained by using the pickup selector in positions 2 and 4. The neck and middle pickups are each wired to a tone control that incorporates a single, shared tone capacitor, whereas the bridge pickup, which is slanted towards the high strings for a more trebly sound, has no tone control for maximum brightness. On many modern Stratocasters, the first tone affects the neck pickup; the second tone affects the middle and bridge pickups; on some Artist Series models (Eric Clapton and Buddy Guy signature guitars), the first tone is a presence circuit that cuts or boosts treble and bass frequencies, affecting all the pickups; the second tone is an active midrange booster that boosts the midrange frequencies up to 25dB (12dB on certain models) to produce a fatter humbucker-like sound.

I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.

The Magnums met with a reception roughly as enthusiastic as the previous Breadwinner and Deacon. In the Carter tables it suggests that the Magnum line was redesigned to look like more conventional Fender-style basses with offset double cutaways in 1978. Other than the body shape, the 1263 Magnum III was identical to the I, and the 1264 Magnum IV was the same as the II.
Specs for combos were as follows: Checkmate 10 (6 watts, 6″ speaker, two inputs, striped grillcloth); Checkmate 12 (9 watts, 8″ speaker, three inputs); Checkmate 14 (14 watts, 8″ speaker, three inputs, tremolo); Checkmate 17 (20 watts, 10″ speaker, tremolo, reverb); Checkmate 16 bass amp (20 watts, 10″ speaker, volume, tone); Checkmate 17 (20 watts, 10″ speaker, reverb, tremolo); Checkmate 18 (30 watts, two 10″ speakers, reverb, tremolo); and Checkmate 20 (40 watts, 12″ speaker, reverb, tremolo). Piggyback amps included the Checkmate 25 (50 watts, 15″ speaker, reverb, tremolo); Checkmate 50 (two-channels, 100 watts, two 15″ speakers, reverb, tremolo, “E tuner”); Checkmate 100C (two channels, voice input, 200 watts, two 15″ speakers, reverb, tremolo); and the big hugger-mugger Checkmate Infinite (200 watts, two 15″ speakers, stereo/mono preamp section, reverb, tremolo and a bunch of other switches). The one shown in the catalog actually has a block Teisco logo and carried the Japanese-marketed name – King – in the lower corner.
The reason being that guitar manufacturers will usually look to keep costs down in the pickup department. This is particularly true for budget models, which will usually be fitted with stock pickups that do the job, but fall short of truly impressing. So guitarists with an affordable, but playable guitar may wish to upgrade their pickups, to make their favorite axe gig-worthy.

Chorus pedals actually make your guitar sound like there are a variety of different guitarists playing the same thing that you are playing, but with a different guitar and slightly out of time with you. This effect makes everything you play sound a little bit ‘warbly’ and thickens up your guitar or bass lines. We recommend experimenting with these as you can use them subtly to add weight to your sound or as a full-blown effect that completely takes over your signal.
Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.

If this doesn’t work, or you’re just a little paranoid about hooking the guitar directly into the PC, you can get one of these. This is the Line 6 Pod Studio GX, and it’s a great value and pretty much a one-stop shopping starter kit. The box you see there is a guitar USB interface, with an input designed for guitar. It’s also got a headphone output, so you can listen through the interface. I had an older version of this ages ago, which I used for basic guitar input until I got some more advanced recording gear that worked well with guitars.
For each slot requiring attention, I use a nut file at a slight downwards angle to widen the slot, making sure not to LOWER it (you should do this at a shallower angle than this photo might imply – you want to make sure that you are JUST slightly downwards compared to horizontal). Just take it really easily here, keeping an eye on the front of the slot to make sure you don’t go too far. Repeat this for whichever slots require widening.
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton
Buddy Holly turned a generation of future heroes – George Harrison, Eric Clapton, Jeff Beck – onto the guitar, with an elemental style: an antsy mix of country and blues that merged rhythm and lead; check the push-and-tease phrasing on "It's So Easy," which echoes Holly's growl-and-hiccup vocals. Playing his Stratocaster and fronting a double-guitar-bass-and-drum quartet, Holly essentially invented the rock band. "Listen to the songs on the first three Beatles albums," says John Mellencamp. "Take their voices off and it's Buddy Holly."
Ibanez is the most important Japanese guitar brand, and this new book tells the story of the electric guitars the company has made since the late 50s. The story tracks the fortunes of Ibanez from its early years as a copier of prime American models to later success as a creator of impressive original designs. The big break came in the late '80s with the launch of Steve Vai's JEM models and the related RG design, which have ensured Ibanez's popularity among metal and extreme rock players. Players include George Benson, Phil Collen, Allan Holdsworth, Pat Metheny, John Petrucci, Lee Ritenour, Joe Satriani, John Scofield, Mick Thompson, and more, many of whom are featured or interviewed for this book. With a gallery of full-color pictures of famous guitars and players, a reference section detailing production years and specifications, and a section covering how to interpret serial numbers. 160 pp.
To understand the difference between parallel and series wiring of two pickups, check out the two diagrams. In the first, the two pickups are wired in parallel, so both pickups’ inputs and outputs are connected together. This is one of the main reasons why a Strat usually has a very bright tone—parallel wiring allows the signal from each pickup to reach the output jack by the shortest possible route. The result is that the high frequencies reach the output jack almost unchecked, giving your Strat that sparkling sound we all love so much.
Being in the entry level section of the market, the Blackstar ID:Core Stereo 20 V2 is meant to be an all-in-one practice rig complete with amp modeling and effects. But what makes it stand out is the use of two 5" speakers for a fuller stereo sound, which complements the amp's versatile voicing features. Speaking of voicing, this amp is loaded with 6 essential tones to play with, two variations of clean (warm and bright), crunch (normal and super) and overdrive (OD1 and OD2), which by themselves are enough to play most musical styles. But being from Blackstar, this amp is equipped with their ISF (Infinite Shape Feature) knob that lets you fine tune the voicing of the amp to your preference. In addition, the ID:Core Stereo 20 V2 comes with 12 built-in effects, covering essential modulation types, delays and reverbs, all of which add up to a portable amp that gives you a lot of tone options.
You honestly could get a single multi-effects unit that will already have thousands of the most popular stompboxes built in, plug it into your PA or headphones, turn on one of the many built-in amp modelers, and you’re good to go. This is actually a solution that many touring musicians have gravitated towards, as it is so much easier to just carry around a single multi-effects unit compared to a pedalboard with several different pedals and a separate amp.
Frets on finished fingerboards may be tough to measure accurately when the finish has appreciable thickness (think Rickenbackers, 70s Fenders) as these manufacturers spray the finish over the fretted neck.  I have measured a finish chip from a 70s Fender maple neck refret that was .010” thick – lowering the fret height by .010” (25% in the case of the stock medium wire at the time) from just finish alone.  I recently refretted a 2008 Fender Eric Johnson Strat where the fret height prior to any work was .040”, yet the crown of the fret removed from the fingerboard was .045”.  I personally do not like this feel and so often I will suggest refretting over a finished fingerboard when working with them rather than under the finish.
For experienced players, you already know what kind of questions need to be brought up when purchasing a guitar. For beginners, a great starting point is to look at what your favorite guitarists play. By taking your own musical tastes into consideration, you can narrow down your choices to models that will provide the tone and sound you already know and love. But whatever you're looking for, you can be certain that the perfect guitar for you can easily be found, right here. Just take a look around and see for yourself.
Before we get into the details, it should probably be noted that building a solidbody electric guitar is a much less challenging project than building a semi- or fully hollowbody guitar. Building the latter types from scratch involves sophisticated woodworking skills and tools that will be beyond the reach of all but the most ambitious beginners. And as we note below, designs with bolt-on necks versus set necks are more beginner-friendly.
This is normally when I tell you about a crowdfunding campaign, but there isn't one currently running for this device, so if you're interested in getting a ToneWood-Amp when it's launched, sign up at their website to register for pre-ordering. There is no commitment to buy one for signing up, but if you sign up now, you can then order one at half-price ($90) when the pre-order campaign goes live (mid-October).
Orville Gibson founded the company in 1902 as the "Gibson Mandolin-Guitar Mfg. Co. Ltd." in Kalamazoo, Michigan, to make mandolin-family instruments.[1] Gibson invented archtop guitars by constructing the same type of carved, arched tops used on violins. By the 1930s, the company was also making flattop acoustic guitars, as well as one of the first commercially available hollow-body electric guitars, used and popularized by Charlie Christian. In 1944, Gibson was bought by Chicago Musical Instruments (CMI), which was acquired in 1969 by Panama-based conglomerate Ecuadorian Company Limited (ECL), that changed its name in the same year to Norlin Corporation. Gibson was owned by Norlin Corporation from 1969 to 1986. In 1986, the company was acquired by a group led by Henry Juszkiewicz and David H. Berryman.
The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.
Flawless build, the action is set up so well I don't see any need to tinker with anything. Pulled it out of the box, tuned it and strummed a few chords, then set it aside for 24 hours. Re-tuned it the next day and it has stayed in tune. I cannot find anything amiss or out of place on this one. Per the serial number, this is a 2015 Indonesian build. The wood is simply perfect in appearance and the tone is outstanding for a thinline. Yeah, I am happy with this one. Recommended.
Launch price: $1,699 / £1,006 | Body: Laminated mahogany, semi-hollow | Neck: 3-piece mahogany/maple/mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x LB-1 humbuckers | Controls: Bridge volume, bridge tone, neck volume, neck tone, 3-way selector | Hardware: Guild Tune-o-matic bridge with rosewood base, Guild vibrato, Grover Sta-Tite open-gear 14:1 tuners | Left-handed: No | Finish: Cherry Red, White, Black
Gibson market the J-200 as the most powerful acoustic guitar on the planet, and we might just agree. It’s so punchy, and has so much presence, both in the low end and right up there with the more sparkling high notes. Combine this with the L.R. Baggs Anthem pickup system, and this is a guitar that is aimed squarely at live performances where the acoustic needs to really make itself heard. It’l
*When the item leaves our warehouse, they are generally shipped to EMS Worldwide Express Mail Service and it would usually take 7 – 10 days to United States. We ship our products from Mainland China where our manufacturing factory is located. We will inform you once your order has been shipped and we will be providing you with the tracking number so you can conveniently monitor the shipments progress on EMS Worldwide Express Mail Service website or SF Express and USPS and Parcel Force website.
This is a special edition by Boss, for one main reason, they’ve collaborated with Fender to design the FRV-1 (click for full review), a dominant manufacturer of guitars which everyone should have at least heard of by now.This pedal is an enhanced remake of its old classic release, the manufacturers have kept everything people loved in the original release, while adding more quality.
You know you’re getting great guitar from the outset, because it’s based on Gibson’s legendary Dove model, which has been sued for decades now by distinguished guitarists in numerous genres, including the likes of Elvis himself. It really does look the part, with the dove design on the fretboard and pickguard, and numerous other nice little touches.
This is a fantastic tool for acoustic solos artists, worship leaders, session players or an acoustic rig that lacks a lot of control or a preamp source. Moreover, the Venue provides the additional functionality of tuning, feedback control, an effects loop and a built in DI box. Its price is usually on the higher end, though you can check used pricing which often dips significantly below retail. However, buying a preamp, tuner, noise gate and DI box separately would run you a lot more than what the Venue costs.

Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.

Mikko, spot on. Even light wood has density, and there comes a point in solid body electric guitars where how dense any piece of wood is only makes a difference acoustically. The point you made about how a guitar feels when you're playing it is sound, though. Its weight and acoustic resonance will affect how you respond to it and how you attack it (same for neck thickness and profile), and that will account for the preference we have for one guitar over another of the same model.
The rotary speaker effect is based on an actual rotating speaker system invented by Donald Leslie called the Leslie speaker. It was often paired with a Hammond organ, but in the 60’s guitar players also began using it for the unique tone and effect it gave the guitar. The original Leslie speaker cabinet used a two speaker system with a rotating horn and bass woofer drum. This created a cool, swirling effect where the music seemed to move around the room. Obviously, guitar pedals can only simulate this rotatary effect, which can be enhanced with a stereo amp setup. Of course you could use an actual Leslie speaker (or one of the newer competitors), but costs are high and it requires lugging around an extra speaker cabinet.
The Triple Crown TC-50 is a three-channel amp, with independent preamps covering clean, low-gain and high-gain ranges. The front panel packs three identical sets of controls including gain, master volume, bass, mid, treble and presence, together with a two-way toggle switch that changes the channel gain and voice. There’s a small toggle switch for manual channel changing, and a pair of master output level controls, one of which is footswitchable. The feature-rich rear panel includes Mesa’s exceptional CabClone speaker-emulated output, with a balanced XLR, headphones socket and line out. The TC-50 also benefits from a footswitchable effects loop, separate reverb level controls for each channel, and MIDI switching for all the major functions. The Triple Crown’s clean channel is highly versatile, going from butter-sweet clarity through to edgy blues soloing, with a lot of control over that ‘just on the edge’ sweet spot. The Lo Gain channel is where the TC-50’s crunch and classic rock tones live, with a multi-layered overdrive and harmonic overtones that shift with varying degrees of pick attack. Flipping the toggle switch into Drive mode adds a subtle midrange bump, invoking JCM800-approved snarl and a dose of extra gain. The Hi Gain channel adds more of the same - lots more, so much so that in the upper reaches we think this is probably the most gain ever from a Mesa amp. No doubt about it, the Triple Crown has three channels packed full of world-class tone that only a handful of amps can compete with.

I was thinking about my personal favorite and it’s just too hard to choose only one. There are too many brilliant creations and all unique in their own way. I love the simplicity of “highway to hell”, the beautiful, mysterious, wah wah riff of “Voodoo child”, I have a weak spot for almost every guitar riff by John Frusciante or Slash and not to mention the zillion riffs that aren’t even on the list. Thank god it never stops.
On my guitar, the bridge plate is held on by five screws. Three on the back of the plate, two towards the neck on the front. You may need to remove the intonation block things.One or all. If you decide to take any off, use your calipers and measure from the front of them to the back of the bridge plate, so that you don't lose your intonation. Mark each saddle like in the picture.
There’s still a lot of confusion over Japanese- and Korean-built guitars from this era in regards to trademarks, who built them, when they were offered, and the connection between them all. However, many of these guitars are high quality and you should always pay close attention when encountering an unknown trademark. If a guitar was produced at one of the aforementioned factories, it could very well be a treasure, just like your Lotus.

Vox quickly grew. In 1964 Tom Jennings, to raise capital for JMI's expansion, sold controlling interest in JMI to the Royston Group, a British holding company, and sold American rights to the California-based Thomas Organ Company. Displeased with the direction his old company was taking, he left the company in 1967, which was around the same time that Marshall overtook Vox as the dominant force in the British guitar amplifier market. While Royston's Vox Sound Equipment division set up new operations in the Kent town of Erith, Tom Jennings set up a new company in his old Dartford location, joined later by Dick Denney. Jennings Electronic Industries operated for several years, making an updated and rebadged version of the AC30 along with other amplifiers, as well as a new range of organs.
The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
Guitar straps may be small, but they play a big role in your performance and comfort level during gigs or practice sessions. A top quality strap keeps your axe securely in place while you're shredding on stage, and reduces stress on the arm and shoulder. More than simply functional, guitar straps add a decorative look to your stage presence to complement your own personal vibe. To that end, El Dorado offers a variety of stylish, durable guitar straps to add to your accessory collection, allowing you to spend less time wrangling straps and more time focusing on the more important task of making awesome music.

The problem that had led to Martin and the idea of making guitars in the first place also led Kaman to the idea of using synthetic materials in guitars. He realized he could use a composite fiberglass to “improve” two aspects of guitar construction. He could solve the problem of cracking due to wood shrinkage caused by changes in heat and humidity, and he could improve vibration transmission from the back because fiberglass actually resonates at frequencies similar to many woods, but is more efficient (wood actually absorbs some of the instrument’s vibrations).
So, you want a guitar that's absolutely packed with tone? One that has the vibe that it's been pulled straight out of the 1950s, but has all the playability, comfort, and stability of a brand-new instrument? Then get your hands on the Godin 5th Avenue Kingpin. This stylish archtop smolders with personality. And with the P90 pickup onboard at neck position, you have an unbelievable vintage/atittude tonal combination working in your favor. You'll notice right away that the Godin 5th Avenue Kingpin has plenty of projection and volume, and moreso in the low/mids than traditional archtop guitars. You'll love it for that. Why does the Godin 5th Avenue Kingpin sound so good? Sure, it's that P90 working with the hollowbody design that gets things going. But the primary tonewoods here are pure North American perfection, including a Canadian Wild Cherry archtop, back, and sides. The finish here is a custom polish that gives each and every Godin 5th Avenue Kingpin a satin sheen that recalls French 19th century craftsmanship. Whatever your musical style, you'll have a friend on your side in the Godin 5th Avenue Kingpin. It is, plain and simple, a great guitar. Godin 5th Avenue Kingpin Archtop Guitar Features at a Glance: Finish: Cognac Burst Archtop hollowbody electric guitar Canadian Wild Cherry archtop Canadian Wild cherry back and sides Silver Leaf maple neck Contoured high-gloss black headstock Custom Polished finish Rosewood Fingerboard Adjustable Tusq Bridge by Graphtech Cream Binding 1 x Godin Kingpin P90 single-coil pickup 1 x Volume, 1 x Tone 16" fingerboard radius 24.84" scale 1.72" nut width
These two articles show us how me can manipulate coil winding direction, electrical phase, and magnetic polarity to achieve hum-cancellation between two coils. Having this knowledge allows us to create hum-cancelling combinations of coils over and above than just using humbuckers. A good example is using a RWRP pickup in the middle position of a Strat.

How it sounds: Ex. 1a demonstrates the treble-cut control—nothing surprising here. Ex. 1b features the bass-cut. With a clean tone like this, it’s a bit subtle, though you can hear the difference if you focus on the low notes. But Ex. 1c adds a vintage-style germanium Fuzz Face with the gain and volume maxed. With the guitar’s tone control wide-open, the signal easily overpowers my vintage Fender brownface—your typical Fuzz Face fart. As I gradually trim bass via the guitar, the tone acquires greater punch and clarity. I remain on the neck pickup throughout—the only thing changing is the guitar’s bass pot setting. The extreme-cut settings near the end of the clip may sound harsh in isolation, but they can be perfect in a band context. At the end of the clip I max the bass pot again to underscore how much the tone has changed. It ain’t subtle.

Just bought a Martin D-18GE beautiful sunburst from Franklin Guitar today and was absolutely blown away by the hospitality, friendly atmosphere and knowledge I was met with. I've never written a revie...w before but this place is so good it deserves praise and recognition! I would recommend anyone who wants to buy any level of guitar with all ranges of experience to go check out Franklin Guitar! From beginners to professionals, this little place has what your looking for and will no doubt be a joyful experience. Thanks Pat! See More
In the face of this mounting conservatism, Ovation entered the solidbody marketplace with an in-your-face design consistent with the radicalism of its Lyracord bowl-backed acoustics. In ’71 it unveiled the battleaxe-shaped Breadwinner, followed by its upmarket brother, the Deacon, in January ’72. As you might expect, despite the unusual shape (rounded upper edge, deep single cutaway at the double octave, s-curved lower edge, and asymmetrically scooped out lower bout) these also featured some innovations. Both had two-octave bolt-on Ovation fingerboards, the former unbound with dots, the latter bound with diamonds. Both had mahogany bodies, the Breadwinner with a kind of spackle finish (white, black, tan or blue), the Deacon a sunburst finish. The Breadwinner had a molded plastic bridge/tailpiece assembly with adjustable plastic saddles and chrome hardware; the Deacon had a similar unit with metal saddles with gold hardware. Early Breadwinners had the jack on the back of the body, but this quickly migrated to the pickguard; some transitional examples have both jacks on the back and pickguard. These Ovation guitars were remarkably ergonomic, well-balanced when standing and cradling comfortably on the knee if you preferred to sit.

Effects are fun, and can make mixing a more creative process, but it's worth bearing in mind that they won't help in situations where the basic principles of recording have been ignored! Used with care, effects can help turn a good mix into a great one, but they are seldom successful in covering up other problems. It is also very easy to over-use them — sometimes their most valuable control is the bypass button, and it is certainly worth learning to use the basic effects well before throwing lots of complicated tricks at your sound. As long as you let your ears decide what is right, you should be OK, and a little critical listening to your favourite records will give you a feel for what works and what doesn't. 

It features an all-mahogany body with a narrower depth that makes it easier to carry around and to play with. The downside being is lack of low end and projection - which can also be a good thing if you prefer acoustic tones with more midrange. Giving this guitar its amplified voice is a Fishman Sonicore pickup, which is paired to an AEQ-SP1 Preamp that also comes with a tuner. And since Ibanez is not one to skimp on aesthetic features, you get a really good looking instrument with distinct fretboard inlays, bindings and more.
If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
Also included was the GP, an equal double-cutaway model with a mahogany body, flamed maple carved top, glued-in neck, fine-tune bridge and stop tailpiece. The only models I’ve seen, which were also advertised, had twin humbuckers and conventional electronics. One source refers to a GP-1, which by nomenclature would suggest a single humbucker, but it’s not known if this ever actually existed. Also, it’s not clear if the GPs came in parts or fully assembled.
{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000013039", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Ebony-1500000013039.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Ebony/J38676000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Ebony/J38676000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000-00-60x60.jpg", "imgAlt": "" } ] }
Amplifiers for electric guitars are more likely than bass amps to have multiple "channels", but some bass amps also have channels. By providing two or more "channels", each with its own gain, equalization and volume knobs, a bassist can preset various settings (e.g., an accompaniment setting for playing a backing part and a solo bass setting for playing a bass solo). In a heavy metal band, a bassist may use a multi-channel amp to have one setting with an aggressive overdrive, while another channel has a "clean" sound for ballads.
Perhaps not as famous as its brother, the EMG 81, this awesome EMG 85 still rocks and makes a worthy appearance in our chart. Perfect for the neck position (although equally solid in the bridge), the EMG 85 features Alnico V magnet-loaded close aperture coils to deliver a natural tone with a huge output, with no loss of clarity as the volume is pushed to its highest.
Slicer – A dynamic effect that sounds like your guitar tone is chopping in and out. This percussive effect is akin to sequencer-type effects used by synthesizers. The effect turns the volume of the signal on and off, and sounds like the signal is being “chopped up” or “sliced” in a specified pattern. The BOSS SL-20 Slicer features 50 patterns to turn your guitar into a groove machine!
NEW ARRIVAL SORRY SOLD OUT QUICKLY ...She's super clean Genuine Ibanez Hoshino Factory release this is a cool collector piece of Japanese Law-suit modle guitar history WoW is this well made guitar Beautiful in person just impressive . This vintage J200 is now over 39 years old that plays with ease and has a HUGE SOUND... really sweet beautiful tone that rings out pretty loudly and its playability makes this guitar fun to play and an excellent choice in your next cool Japanese Vintage guitar... she's in better than average cond too well taken care of Adult owned right here in California she's in top form folks. With its Nice medium slim taper flamey maple neck 1-11/16ths at the nut. Classic beautiful original pick guard looks exactly like the old age Gibson, the detailed workmanship fit & finish you will be sure to notice and love. Ready to tour or record tonight! every time you pick it up to play. TO SEE THE PICTURE GALLERY OF THIS GUITAR CUT & PASTE THIS LINK THEN CLICK OR RETURN: https://picasaweb.google.com/gr8bids/73ElDegasJ200BlondFlamed?authkey=Gv1sRgCKTqjqGy09roBw#slideshow/5573434646760239042.

Even with such a lightweight configuration, the Fishman F1 system is still more than capable of rendering the tone of the DCPA4R with a great deal of accuracy due to the superior tight focus on the preamp. This guitar is our pick for the top acoustic electric guitar if price is no object. There are many other awesome models out there and we urge you to check them out as well, but you'll likely find that your search could have ended right here.
{"id": "114488369", "categoryId":"site5AAG", "name":"Used Legacy Solid Body Electric Guitar", "pageUrl":"/Used/GL/Legacy-Solid-Body-Electric-Guitar-114488369.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Legacy-Solid-Body-Electric-Guitar/000000114488369-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"799.99", "priceMin":"799.99", "priceMax":"799.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"G&L", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"402390681023", "priceVisibility": "", "itemType": "Used"}
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Edge III - Cutaway: Double - Hardware: Black - Pickup Configuration: H-H - String Instrument Finish: Devil's Shadow
One half step down from standard Drop A. Used by bands such as Trivium on some songs from Silence in the Snow and The Sin and the Sentence, Destrophy, TesseracT, Brian "Head" Welch, After The Burial on some songs from their Rareform, In Dreams and Dig Deep albums, Within the Ruins, In Hearts Wake and Periphery. Jim Johnston used this tuning for the song "I Bring the Darkness (End of Days)".
At one point or another in your musical life someone is going to as you what the best guitar brand is.  By now you’ve probably figured out that there’s no single “best guitar brand.” The verdict would likely go along the lines of what is the best guitar brand for you or your needs as a guitarist. There are some good suggestions that can be made with the above information along with some personal insight. Things like:
It's like saying the wood handle of a hammer effects the tone generated by hitting a nail. The nails been hit, vibrations through the wood afterward are pointless. Unless the guitar itself is metal and hollow, you would hear sound generated acoustically, as you would with any acoustic instrument. An electric guitar is not an acoustic instrument in a classical sense.

Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."

Another great practice amp in the running for best electric guitar amp for beginners is the Blackstar HT Series HT-1. It’s a 1W tube amp with a single 8″ speaker. It features 2 channels (clean and overdrive), stereo MP3 / line input and external speaker output. It’s use of dual-triode ECC82 tubes provides the crunch and break-up characteristics of a traditional 100w amp at a much lower volume. It also has EQ, Gain and Reverb settings.
This is a great opportunity to start working with a digital multimeter (DMM). Track down an inexpensive DMM and make sure it has a continuity function, preferably with an audible connection indicator. You can then trace how switches work by connecting the individual lugs to your DMM and seeing which are connected, and then switching to the other position and taking the same measurement again. The beep that sounds when you’ve made a connection is a great help when you’re taking these measurements.
Dissatisfaction with vintage units of this type usually centers around their limited gain, and their inability to sound truly fierce with Drive cranked up to full. The more exemplary users of this type of pedal, however—such as Stevie Ray Vaughan or Eric Johnson, who were both masters of early Tube Screamers—usually kept the Drive control in the lower part of its range, where the sound remains more natural and, yet again, serves as an excellent pre-boost to drive a good tube amp into distortion when the Level control is set high enough. Some players also find older pedals built to this design to have a distinct midrange hump, a slightly wooly tonality, and/or a lack of low end (as ever, depending upon the ears of the player you talk to). Consequently, a lot of newer makers have accounted for these in their redesigns. Visual Sound’s Route 66 pedal has a Bass Boost switch, Ibanez’s own recent-era TS9DX Turbo Tube Screamer has a Mode control that takes you from classic sounds to settings with more distortion and more low end, and plenty of other makers address both in their variations on the circuit.
Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.
The amp has the usual basic controls: Volume, Bass, and Treble, plus a Gain knob that adjusts the amount of distortion. Once you start turning some of the Champion 20’s other knobs, all sorts of additional tonal possibilities arise. The Voice knob accesses simulations of different amps: Tweed (1950s-era Fender amps heard on early R&B records such as “Sittin’ on the Dock of the Bay” and “In the Midnight Hour”), Blackface (mid-1960s Fenders, often used by Eric Clapton and Stevie Ray Vaughan), British (reminiscent of the classic Vox amps used by the Beatles, the Rolling Stones, and U2), and Metal (somewhat like the sound of the Marshall amplifiers favored by rock and metal players from Jimi Hendrix to Slash). Each of these four simulations has three different variations that alter the tone a bit.
{ "thumbImageID": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "defaultDisplayName": "Fender American Professional Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030611", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black-1500000030611.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030610", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray-1500000030610.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray/J46145000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray/J46145000002000-00-60x60.jpg", "imgAlt": "" } ] }
Join the "Cigar Box Revolution"! This La Vox Cigar Box Electric Guitar is built from a decidedly uptown-looking round box. Neck-through construction means it is heavier than most cigar boxes, and it performs more like a standard electric guitar. Play some raw, smokin' blues, back-alley funk, or whatever else wells up from deep down inside.  More details...
Originally started as a replacement parts shop in Japan, ESP Guitars – which stands for Electric Sound Products – got their guitar manufacturing business off to a rocky start here in the United States. They were taken to court by Gibson guitars for producing instruments that too closely resembled the American brand’s guitars. But, they settled out of court in 1978 and ESP’s reputation eventually grew, thanks in part to George Lynch, the guitarist for the 80s metal band Dokken, and his signature axe pictured here – The Kamikaze Model 1. Now, ESP guitars are wildly popular amongst metal and hard rock clientele and you can hear their instruments on the records of some of the brand’s loyal artists – including the likes of James Hetfield and Kirk Hammett of Metallica, Page Hamilton of Helmet, and the guys in Children of Bodom.
Over 20 years, Ovation produced some very interesting guitars. Not only do the American models feature innovative technology that alone makes them worth seeking out, they really handle nicely as players, despite their rejection at the time. Some were ahead of their time. Most were out of step with it, as well. After two decades of failed attempts to market solidbody (and some hollowbody) electrics, Ovation did what other companies who failed to successfully cross over from the genres that brought them their fame. In ’88, Ovation purchased Hamer guitars. Ah, but that’s another story…

When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
Here you get a very bright sound but the output will be less than if it were wired in series and you no longer have hum canceling. Since you are using just one half of the humbucker, "coil-cut" sounds best when using a high output pickup (DiMarzio "X2N", DiMarzio "Distortion", Seymour Duncan "Invader", Seymour Duncan "Distortion", etc). A coil cut switch is relatively easy to wire up and it is just a matter of connecting one end of an SPST switch to that junction that was created for series wiring and connecting the other end of the switch to ground. So, we now have another 2 tone humbucker arrangement that can easily be switched back and forth between 2 tone options.
music is an expression with a variety of feelings involved.there is no such individual as the greatest guitarist.there are however a great number of highly talented,highly skilled and original guitar players.they encompass many genres of style ,technique,they should not be compared with each other.rather they should be appreciated for their individuality and that magnetism that makes them all unique.
The Takamine GD71CE is a feature packed acoustic-electric guitar, with its solid top construction, visual embellishments and improved electronics. Takamine equipped this guitar with a solid spruce top and rosewood for the back and sides - a nice tonewood combination known for its articulate sound. It also comes with matching aesthetic appointments that include maple binding for the body, neck and headstock, abalone rosette, rosewood headcap, maple dot inlays, gold die-cast tuners with amber buttons, and the body is wrapped in a nice looking gloss finish. In addition to all this, the Takamine GD71CE is equipped with their TK-40D preamp system which gives you more control over your amplified sound with its mid contour switch, 3-band EQ with bypass and notch filter.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.
First the lower line models were built for steel strings first. Like the style 17 in 1922, and the style 18 in 1924. Pretty much all models were built for steel by 1927-1929. But unfortunately there was no definative serial number or time line for any 1920s Martin style. This makes it difficult to determine if any particular 1920s Martin guitar is really built for steel strings. Martin didn't just implement steel string design at any one definative point. It was a transition, and apparently a very slow transition. And special orders for gut or steel complicated things.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: fender","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"fender","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
• I like to insert a compressor after this, to add some sustain and even out the guitar's dynamics, for a more consistent distortion sound. So for the second insert slot, choose Dynamics/Vintage Compressor, then click on the insert's Edit button to see the compressor's interface, and set up the parameter values as desired. A good starting point would be Input at 17 and Attack at 8.9, with Punch and Auto set to On. You'll probably need to adjust the Input (effectively the Threshold in this case) according to the level of signal coming into the plug‑in. Set the Output to a level that's as high as possible, but doesn't approach clipping.
Where you let the overdrive or distortion fill out the tone generated by only three notes. Mess around with different pairs of notes and you'll soon find what sounds good with distortion and what sounds harsh and dissonant. A simple root fifth octave triad is the bread and butter of overdrive and distortion playing. Sometimes if you have a lot of gain on a hot distortion setup you may need to roll off the highs a bit as the high end harmonics can get a bit too brassy on top and harsh on your ears. Have a blast.
Plug an electric guitar into the input. Adjust the input drive level as high as it will go without causing the input clipping light to activate. Adjust the drive level control to a level below where the drive clipping light activates. Different reverb sounds can be achieved by lowering and raising the reverb drive level. Adjust the reverb level for a nice sounding balance between the dry and reverb sounds. Adjust the output level for the optimum volume level. Now go play some surf music.
In 1981 Fender-CBS hired William Schultz, John McLaren, and Dan Smith away from the U.S. division of Yamaha. Schultz became the president of Fender-CBS, McLaren the managing director while Smith was appointed the director of marketing for Fender electric guitars. In a drive to rejuvenate the quality control and Fender’s market position, Dan Smith oversaw an upgrading of the basic production model Stratocaster and by late 1981 the new production model was unveiled as the 1982 Stratocaster. It featured a pre-CBS smaller headstock (compared to the 1980 “Strat”), a four bolt neck plate, an overwound X-1 pickup (introduced on the 1980 “Strat” model) in the bridge position and a body end truss-rod adjustment without the Bullet nut. These are known today as “Dan Smith” Stratocasters and prized by collectors for the attempted, albeit brief, return to pre-CBS stylings.

Loved this guitar a lot😘, been going back and forth to our nearest guitar center and to he honest with you, I tried the Taylor gs mini, MartIn Black electric acoustic, Breedlove electric acoustc, but man, when I tried and started playing this awesome Ibanez AW54CEOPN, I was blown away!!! The sound was loud and cleat the tone was awesome, the color was fantastic! For the price of $299.00 was very cheap for the quality and sound that this guitar can offer👍🏽👍🏽👍🏽
Much of the difference between one make of guitar and another is in the player’s head. I doubt whether many people listening would really notice the difference and they certainly wouldn’t care. That said, there are differences in feel and in the player’s perception of the sound. I currently have four Gibsons and two Fenders, so you can see where my sympathies lie, but currently I’m more taken with either of my two Gretschs. One point of correction about scale length though. Over the years 25.5″ became standardised, probably by Martin. Fender copied this when it produced the Broadcaster/ Nocaster/ Telecaster since 25.5″ was the scale length for a guitar and Fender had no previous experience hence the poor neck radius and bad controls. Gibson, being actually considerably more innovative (I.e. the truss rod, the archtop, the raised finger rest/ scratch plate, controls for each pickup etc etc in fact most of the fundamentals we now take for granted) had worked out that scale length should be a function of body size. All of Gibson’s full size (17″ and up) guitars have 25.5″ scale lengths. Smaller bodies get shorter necks. So 24.75″ is only one of Gibson’s scale lengths sunce it has used shorter and longer as appropriate.
Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.
Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration. To produce this relatively "clean" sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional "Headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called "switching amplifiers."
If magnetic pickups are excellent for traveling guitars, contact pickups are great for amplified acoustic performances. These can capture the sound from the soundboard as well as from the rest of the body. You can also get a guitar that comes with a blended system which combines a pickup with a microphone. A model with a built-in preamp is also becoming the norm these days.
This multi effects pedals brings all that shine of the studio in a single compact device. Now you have state of the art processors like flanger (click here for flange pedals), chorus, a phaser pedal, delay, a vocal effects processing device, and tremolo and pitch shifter in your bare hands. Apart from such features, you also get a mind-blowing back up of 24-bit/40 kHz resolution that turns your jamming into a soulful experience.
The company initially manufactured only traditional folk instruments,[citation needed] but eventually grew to make a wide variety of stringed instruments, including violins, cellos, banjos, upright basses—and a variety of different types of guitars, including classical guitars, lap steel guitars, semi-acoustic guitars, and solid body electrics. Some of Kay's lower-grade instruments were marketed under the Knox and Kent brand names.

The rest seems like a bit of an odd ball selection. It's the age old argument of technique over substance. BB King puts more into a small handful of notes than Malmsteen does in several hundred. One of the most musical guitar players to have graced the earth. In fact I think it was BB who stated that it's not the notes you put in but the notes you choose to leave out that count. Now that's music.

A guitar is a stringed instrument that has always been a favorite amongst musicians because it creates symphonic tones that foster creative expression. Guitars are available in a variety of make and brands. In India, the guitar is the most commonly played musical instrument. Since a good guitar lasts for more than a decade, it is important to keep a few things in mind when you are buying a guitar for the first time. There are different types of guitar that are available for buying.

Superb guitars. Lakewood have both standard and custom production of 12-fret cutaway guitars. Other producers do not offer standard production - except of Taylor, but Taylors at the same price level are made technologically cheaper, resp. at the same quality level are much more expensive. My impression is that Lakewoods have a little bit lively sound than Taylors. I am interested in well made, i. e. with high quality craftmanship, 12-fret cutaways and the brand is not so important for me.

The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.

{ "thumbImageID": "LX200B-Series-III-Electric-Bass-Guitar-Metallic-Blue/H11151000001000", "defaultDisplayName": "Rogue LX200B Series III Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Metallic Blue", "sku": "sku:site51278002525869", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX200B-Series-III-Electric-Bass-Guitar-Metallic-Blue-1278002525869.gc", "skuImageId": "LX200B-Series-III-Electric-Bass-Guitar-Metallic-Blue/H11151000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LX200B-Series-III-Electric-Bass-Guitar-Metallic-Blue/H11151000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pearl Black", "sku": "sku:site51278002525872", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX200B-Series-III-Electric-Bass-Guitar-Pearl-Black-1278002525872.gc", "skuImageId": "LX200B-Series-III-Electric-Bass-Guitar-Pearl-Black/H11151000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LX200B-Series-III-Electric-Bass-Guitar-Pearl-Black/H11151000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51278002525875", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX200B-Series-III-Electric-Bass-Guitar-Candy-Apple-Red-1278002525875.gc", "skuImageId": "LX200B-Series-III-Electric-Bass-Guitar-Candy-Apple-Red/H11151000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LX200B-Series-III-Electric-Bass-Guitar-Candy-Apple-Red/H11151000003000-00-60x60.jpg", "imgAlt": "" } ] }
It's like saying the wood handle of a hammer effects the tone generated by hitting a nail. The nails been hit, vibrations through the wood afterward are pointless. Unless the guitar itself is metal and hollow, you would hear sound generated acoustically, as you would with any acoustic instrument. An electric guitar is not an acoustic instrument in a classical sense.
Octave/Pitch Shift – A frequency-based effect that takes the input of your guitar tone and shifts it in pitch anywhere up to an octave above or below. This is useful to simulate a bass guitar line or the higher pitched strings of a twelve-string guitar. Some octave or pitch shift pedals double your guitar tone before shifting making them more akin to Harmoniser pedals.
A right handed 6 strings, electric guitar that mostly comes in black. The body is made from mahogany, while the fret board is made up of rosewood. The fret board is composed of up to 22 frets of 2.7 mm in size. It additionally has beautiful electric features such as a 3 way toggle and a push and pulls volume and tone. Price ranges from INR 21,400-21,541. Click below to get more product details.
A switch is a device that segments networks into different subnets. Segmenting the network into different subnets keeps one network from overloading with traffic. Therefore, a switch forwards all data in the data layer and sometimes the network layer as it filters the data. A switch allows a connection to be established and it terminates a connection when there is no longer a session to support. Prior to switches there were hubs. Hubs also connected multiple independent (connected) modules in a network, but they were not as efficient as switches. Since most switches work in Layer 2, and not in Layer 1 like a hub, they are better at filtering data. A switch looks for Ethernet MAC addresses, keeps a table (the bridge forwarding table) of these addresses, and navigates the switch between ports. The switch prevents collisions and gives full bandwidth to each connection at the switch port. Switches save bandwidth by only sending traffic to destinations that have traffic. When a switch switches Ethernet frames, they monitor the traffic for the response from that frame and see what device, on what port, responds to that flooded frame. There are different types of switches that range from "dumb" switches that lack manageability and can monitor only 4-8 ports to "managed" switches that can get statistics on switch traffic, monitor connections, and hard-code up to 96 port speeds and duplex. Then again, there are "chassis-based" switches with blades or cards that perform not just switching, but routing and intrusion detection too! If you are interested in this, look into Cisco's Catalyst 6500 Series. Another type of switch preferred by large enterprises is the "Layer 3 Switch," because it has the functionality of a router .

A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here: https://guitarkitworld.com/common-mistakes-to-avoid-when-building-an-electric-guitar-kit/

Struggling to get your guitar sounding sweet and creamy? Don't fret! STUDIO GUITARS is here to warm up your sound with a selection of certified studio-fresh guitar loops recorded by Prime Loops' own professional master of the strings! Using some of the most classic equipment around, we've covered every curve of this awesome instrument's sound with an incredible collection of acoustic and electric guitar samples.

This guitar is a good example of the late 1960s Matsumoku made imports that were flooding the Americas.  This model with these pickups were made for many years, starting around 1966 through the early 70s.  That’s a good run!  Based on my research this particular model probably dates from the late 60s.Most of the time I see these guitars with chrome or tortoiseshell pickguards, and this is the first one I’d seen with a white guard.  Has a cool shape too!  These pickups were exclusive to Matsumoku and generally have a good sound.  I’ve measured about 10 of these pickups, and the reading are often all over the place.  Some of these read out near 9k, and some read out under 5k, so obviously the specs changed over the years.  I think the hotter reading pickups came from the later 60s era.Now that Lyle name was owned by the L.D. Heater Music Company out of Beaverton, Oregon.  They had some cool electric models here and there and seemed to really focus on acoustic guitars back in the day.  Most, but not all of the electric models were made by Matsumoku.Most Matsumoku guitars were made rather well, especially the wood parts.  Bodies and necks were always top notch and their finishes hold up better than the average import guitar.  They did some great, burst finishes!  But one weak point on all these Matsumoku electric guitars were the pickup switches.  They just weren’t made to withstand constant use and almost always fail.  Dano at Happy Guitar Repair knows how to rebuild these switches, and it’s just about the only way to bring them back to life.The all-telling Matsumoku plate is back there and the neck pockets on all their guitars were really solid.  If you’re looking to get into these vintage Japanese guitars, Matsumoku models are always a good place to get your feet wet!Mike Dugan loved this particular model, even though the frets were vintage Japanese tiny, and the pickups read out a little weak, sometimes a guitar just has a little chime and zing, and this one had it.  Enjoy peeps!
Lydia Lunch once beat her Teenage Jesus & the Jerks bandmates with coat hangers during practice; and her confrontational attitude was only matched by her completely unfettered guitar playing. Calling the instrument “a grand assaultive weapon,” she treated it as such, often attacking the strings with knives or even shards of glass, refusing to even bother learning chords, using it as a blunt force to express a total anti-pop, anti-punk, anti-everything rage.
If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
Our basic no frills guitar Denny designed to go head to head with $1000+ guitars. Magazine reviews and customer testimonials say it actually outperforms many well known $1500 models. If you want the look, feel and sound of a high dollar acoustic with 50% easier playability this is the best guitar we offer. Shipped wholesale direct from our workshop in Lincoln, Nebraska. 100% money back guarantee, lifetime warranty.
I then surveyed Amazon, Sweetwater, Musician’s Friend, and other online musical instrument vendors to see what was available. Having found several promising models priced below $200, I decided to set this as our price ceiling. By setting a $200 ceiling, we’re not saying that more-expensive models aren’t worth paying extra for—only that the models we recommend here are more than adequate to get a beginner off to a great start.

Softer Delays: I'll usually have at least a couple of delays as auxiliary effects in a rock or pop mix, but I often find that bringing the general level of the delay as high as I want it makes any transients stand out too much. When I'm sending single notes on a clean electric guitar to a delay line, say, I tend to want to hear a wash of sound, not the rhythmic 'CHA-Cha-cha-cha-cha' of a repeated note attack. For this reason, I'll often put a gate or expander before a delay, with an attack time set to 10ms or so. This is enough to 'chop off' any abrupt transients, and makes the delay sound much smoother. Sam Inglis
Hopefully, this guide has given you all the info you need in order to go out there and find the perfect guitar for yourself. We went into some aspects of electric guitars that will shape your decision the most. Beyond the ultimate considerations discussed between "this or that," the rest is a matter of preference that only develops after you've had time to gain that much experience. Until then, we hope you score the best electric guitar you can from above, as they'll carry you the distance until you've traversed the path long enough to start getting peculiar and picky.  Happy shredding!

{"pageName":"[gc] pdp: ibanez 1984 1984 ibanez destroyer i red solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113668304;;;;evar65=null-Guitars-Ibanez","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
Teisco's very FIRST solid body electric guitar, the 1954 Teisco, Model J-1. 1 single coil Pickup. Front plate says, "NIHON ONPA KOGYO CO. LTD TEISCO". Back plate says, "TEISCO ELECTRIC GUITER MODEL J1". Yes, Guitar is misspelled as "GUITER"!. Maple neck is a "ball bat" with very pronounce "V". Guitar is currently set up for slide with "flat-wounds". VERY ROUGH CONDITION and lots of "character". Where to start, hm....? Firstly it has termite, yes, termite damage to the back. Don't ask me how, I don't know. The top is veneered with a beautiful quilted maple, but is missing a big section on the front. The tailpiece is missing it's cover. The wood bridge is partially inverted and sagging, due to string tension. The pick guard is warped (normal to many vintage guitars). We're pretty sure the brown bakelite knobs, while cool, are not original. Some of the frets have been changed, mostly by removing from the last 6 slots and relocated. 95% of the veneer is missing from the back. The tuners are mostly original with a couple of replacement gears. A couple of the tuner button shafts are bent, but tuners still function. The great thing is the way it is currently set up, it makes a heck of a "slide guitar". The original pickup sounds incredible through both our shop Trace Elliot and Marshall JCM-800!!! No case included.

[author image=”https://www.producerspot.com/wp-content/uploads/2014/02/alan-steward-avatar.jpg” ]Alan Steward is a Producer, Engineer and Musician with over 30 years experience in the music business. He worked with Grammy winning artists from the Temptations to the Baha Men. His music has been used in TV shows and feature films. He is also well-known as a producer of loops for music production and owns a recording studio in Germany.[/author]

Rolling Stones best electric guitarist list should've been nicknamed the best average guitarist list. I didn't give this guy the time of day because I thought the bucket thing was to cover up how badly he sucks. Turns out it's the opposite. He's just weird. It's too bad the average person doesn't have the capacity to enjoy this type of advanced music.
Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
Launch price: $999 / £899 | Body: Basswood | Neck: 5-piece maple/walnut | Scale: 25.5" | Fingerboard: Maple | Frets: 24 | Pickups: Ibanez V8 humbucker (bridge), S1 single coil (middle), V7 neck humbucker | Controls: Volume, tone, 5-way selector | Hardware: Edge locking vibrato | Left-handed: Yes | Finish: Desert Sun Yellow, Road Flare Red, Purple Neon, White
It’s ironic that Leo Fender, the creator of the most influential instrument in rock music, wasn’t actually a fan of rock ’n’ roll; he preferred country and western. But it goes to show you that once something new is out there, you can’t stop makers and players from reinventing it, adapting it for new purposes, taking it apart and putting it back together in new ways. The electric guitar is a prime example of unintended consequences. Initially, it just wanted to be a bit louder, but it ended up taking over and reinventing popular music and culture. Will we even recognize the sound of the electric guitar 10 or 20 years from now? I, for one, hope not.
Electric guitars have been popular and prominent for decades. For quite some time, being a left-handed musician was considered a hindrance and artists often had to make due with a right handed guitar. Now, there are plenty of fantastic options for lefties so they can make their mark on the music world. As a left-handed musician you probably know that many legendary artists were lefties too- Paul McCartney, Jimi Hendrix, Kurt Cobain, and Dick Dale are just a few examples of musicians who paved the way for up and coming lefties to seriously rock out. Electric guitars are perhaps the most notable and distinctive instrument in pop and rock music. Heavily used on stage and in the recording studio, the electric guitar provides some of the most memorable parts of a song or tune.

We have taken a look at the many varieties of electric guitars available in today’s market (you can read about the types of acoustic guitars and even guitar strings as well).  With this many options, it is wise to consider the genre and tone you are searching for by researching what your favorite artists choose to craft their sound.   Your choice may be based upon visual appeal and cool factor, but make sure the instrument you choose is capable of producing the tone of the style of music you play from your heart!  It's a large selection of body styles but hopefully now you're also comfortable with all of the sounds of the various types of electric guitars.
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.

Why Martin electric guitars have never been more popular isn’t too hard to figure out. Martin, whose expertise has always been in top-notch acoustics, never really put a lot of effort into marketing its electrics. They were always well made, and, especially in the necks, clearly “Martins.” In the final analysis, however, it probably comes down to being victims of the success of their acoustic brothers, and players have just never seemed to warm up to the idea of Martin “electric” guitars. For the savvy collector with a taste for quality and relative rarity, Martin electrics remain excellent and attainable prizes.
A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.

Kasuga produced their own house brand in Kasuga guitars. For a brief period of time the company produced Yamaha acoustic guitars. Kasuga guitars were first sold in America in 1972. Unlike many Japanese manufacturers who outsourced their guitar production in other factories outside the main maker, Kasuga produced all their products in-house. Badged guitars known to have been made by Kasuga include Conrad, Emperador, ES-S, Ganson, Heerby, Hondo, Mei Mei and Roland. Kasuga went out of business in 1996.
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’
Ten is not enough. If you are not here for the first time and you already checked our article on the top acoustic guitars and the recommended electric guitars you know how we roll.And if we are going to review a lot more than just 10, why not split them into proper categories that will help you choose what is working best for you. As it will take a lot of time to write all these for you, please be easy on us. For the people that do not want to waste that much time thought and just want a quick list with some great effects we prepared the comparison charted listed below:
Echo and delay are created by copying the original signal in some way, then replaying it a short time later. There's no exact natural counterpart, though the strong reflections sometimes heard in valleys or tunnels appear as reasonably distinct echoes. Early echo units were based on tape loops, before analogue charge-coupled devices eliminated the need for moving parts. Today, most delay units are digital, but they often include controls to help them emulate the characteristics of the early tape units, including distortion and low-pass filtering in the delay path and pitch modulation to emulate the wow and flutter of a well-used tape transport.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]