Reverb – The best analogy for reverb effects would be playing your guitar inside a pipe. That’s an extreme level of reverb, of course, and these pedals will allow you to go from there all the way back to subtler effects like the natural reverberation of a concert hall. This effect sounds great with a clean tone, but beware of using it with heavy distortion or else you might lose too much definition from your sound.
Without a doubt, Instant Guitar is a bit messy when it comes to sound quality, and from the looks of it on the web, others agree. First, there are incredible tones here; Cathedral mode is angelic and the low chord hits are drool worthy, to put it lightly. The problem is that the more you shape your guitar to sound like an actual guitar, the worst the sound quality becomes.
Scratch and Dent - Demo Model full size electric guitar from Davison is the perfect way to start playing at an affordable price with features you'd normally expect on a much more expensive instrument. With a built-in humbucker pickup for that "rock" sound, you can plug this guitar into any amplifier or software system. It has a high gloss finished body and a contoured body for ultimate play-ability. Perfect for the aspiring guitar player of any age, this Davison is also Teacher Approved.
If you have ever played or listened to metal, you probably know about Ibanez. This brand has been around for a while and has become a patron saint of those who like harder sounding music. Built for speed, Ibanez guitars bring are finely tuned instruments which enable the player to explore the limits of their skill. On top of that, any Ibanez guitar is going to be great value for the money.
• Trapeze: Although the trapeze tailpiece was original equipment on the very first runs ofGibson Les Pauls, they are mostly the province of hollowbody and semi-hollowbody guitars, ranging from the L-5-CES to the Epiphone Regent. Early ES models also came with trapeze tailpieces. These devices attach to the heel of the guitar’s body and have slots for strings to pass through. Once the strings are installed and tightened to proper tension, the tension suspends the tailpiece in air — providing the appellation trapeze. The principle behind trapeze tailpieces is that they dampen the natural resonance of the strings less than stop tailpieces. These tailpieces also transmit the string tension to the guitar’s side, rather than its belly. The downside is they are the hardest tailpieces to string, since strings tend to drop out of their slots until they are at tension. In that respect, they take some getting used to.
Revamp the entire company staff from the C.E.O. down to the lowest level managers. Give workers raises. Treat them like human beings. Be nicer and friendlier. Reduce stress levels and not have such a toxic atmosphere. Make the daily numbers actually feasible and actually attainable without having to work 15 hrs. to achieve them. Have accountability on all levels - checks and balances- from C.E.O. down to lower management. Recognize the workers are human, and not robots!

First, plug your guitar in and toggle all the switches and knobs. If your guitar still plays fine, the connection problem is internal. Second, for non-Stratocaster style guitars, remove the cavity covers on the back of the guitar. Strum the strings and move the wires that are soldered to the switches, pots, and output jack. You will probably find your loose connection when the guitar cuts out again. For Stratocaster style guitars, you will need to remove the pickguard and manually check each connection point to make sure the solders are solid. Third, re-solder the loose wire and screw the cavity covers or pickguard back on. For more information about how to solder wiring, see the soldering page.


JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.
There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
Awesome and amazing are just two of the many favorable adjectives that are used to describe the Orange Micro Dark. Most users find its tone to be convincingly tube like, while others are very impressed with its volume, considering its portable profile. A lot of users also appreciate its ease of use, and it also helps that it looks really good. Bobby Cannon of Guitar Player magazine describes it as "more than capable of delivering all the vicious tones you can dial in, and there’s no shame in going for a super-light amp that does the job..."
Aside from the superstrat ESP M-10 shown earlier. The ESP LTD EC-10 is also an affordable guitar but with a different body design derived from the Les Paul. The features of this LP inspired guitar that makes it different is the bevels on the body and belly cut at the back for comfort. Its major resemblance to a Les Paul is the humbuckers pick-ups equip on the guitar. Together with the bridge design for having a stopbar and tom bridge without a whammy bar.
The octave pedal raises or lowers your pitch an octave. This makes a huge sonic impact as soon as it is heard. This pedal will make your guitar sound huge, broad and bass-rich or fierce and piercing - even both. It's best to look for a pedal with a “mix” knob, so that your original tone is not completely lost. One step and you can change the direction of the riff or the entire song. This effect was used extensively by Jimi Hendrix in combination with a fuzz tone, while more modern users include Tom Morello and Jack White.
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona.[27] Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company.[28] In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric.[29] Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster.[30] Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
Yes, he wears a KFC bucket on his head and a Michael Myers mask on his face, but he's a genius. Buckethead (real name Brian Carroll) plays every style, from country to death metal. Albums like 'Monsters and Robots' and 'Population Override' are must-haves for any aspiring guitarists, and instrumentals like 'Nottingham Lace' and 'Too Many Humans' take some beating. - Floods
We're just over the £300 price tag here, but for the shredders and jazz fans out there, the Schecter C-6 Plus in Electric Magenta is a great option, whether you’re a beginner or pro player. It’s one of our favourite cheap electric guitars, and one hell of a performer, featuring professional level appointments inspired by Schecter's  Diamond Series guitars  – this is a monster of tone, and well worth the extra investment.

Echo and delay are created by copying the original signal in some way, then replaying it a short time later. There's no exact natural counterpart, though the strong reflections sometimes heard in valleys or tunnels appear as reasonably distinct echoes. Early echo units were based on tape loops, before analogue charge-coupled devices eliminated the need for moving parts. Today, most delay units are digital, but they often include controls to help them emulate the characteristics of the early tape units, including distortion and low-pass filtering in the delay path and pitch modulation to emulate the wow and flutter of a well-used tape transport.
Good questions. Firstly, swapping the saddle around has the effect of moving the tapered top edge of the saddle closer to, or farther from (depending on which way it was to start with) the front of the bridge. If you're wanting the string to be as long as possible, for example, you'd need to make sure the saddle is oriented in such a way that the tapered edge is at the tail end (farther from the pickups). If you look at my pictures above, you'll see that my D-string saddle is originally oriented in this way, but in my case I need to SHORTEN the string, so I rotate it and this gives me more forward adjustment. Since you need to do the opposite of me, you'd therefore need to make sure your saddle has the same orientation as what mine had BEFORE I changed it. I really hope that makes sense.
Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.
As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.
Another strong point of this guitar is its African mahogany neck that has a close to standard scale length of 25.3", making this instrument very easy to transition to when coming from regular sized guitars. Also noteworthy is its innovative split bone saddle, which allows for better intonation. Finally, the CT4B preamp gives you 3-band EQ, a volume control and a nifty built-in tuner Artists that play Takamine guitars include John Scofield, Bruce Springsteen and Bruno Mars! This is a great buy if you are looking for a premium couch & travel friendly acoustic guitar that does not cost an arm and a leg.
While the Line 6 PODHD500X is no longer the flagship guitar processor, it is still very much in demand in the market, as evidenced by the overwhelmingly positive response that it continues to get from users and expert alike. It follows after its predecessor, albeit with a more powerful CPU and improved interface via colorful LED rings around the footswitches.
Smaller combo amps may be easier to transport and set up than using separate amplifier and speaker units, and as such, they are a popular choice for many bass players. Bass players in quieter, more acoustic genres (e.g., jazz quartets which play in a wine bar or a folk music group which plays in a coffeehouse) may be able to use smaller, more modestly powered combo amps. Bassists who play in genres more associated with a high stage volume (e.g., hard rock or electric blues) may tend to use, larger, more powerful (in wattage) combo amps. While a gigging musician will typically only bring one combo amp to a show or recording session, some bassists in major touring bands have two or more combo amps on stage, with an "A/B" switching pedal used to select different amplifiers. In this way, a bassist could have a vintage tube combo amp and a modern solid state amp, and then switch between them to select a different tone for different songs.
Lastly, we have the bread and butter of Schecter’s mid-range selection. Schecter Omen Extreme-6 is one of their oldest and most popular models to hit the market. This guitar brings a decent balance of price, performance and build quality. While it’s not as fancy as the previous models we have mentioned, as soon as you pick it up you know it’s made for serious business.
The beauty of the Yamaha FG800 Acoustic goes way beyond skin deep with its solid Sitka spruce top complemented by a Nato back and side. The mellow, well balanced tone offers excellent note definition, worthy of dreadnoughts costing far more. Quality materials such as a rosewood bridge and fingerboard, black and white body binding and more make FG Series acoustics sweet buys with a great reputation.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Muelle principal Tope Bloque del trémolo Varilla de tope Con la guitarra afinada correctamente, ajuste el muelle principal y verifique que la varilla de tope toque el bloque del trémolo y el tope. Si la varilla de tope no toca el bloque del tremolo y el tope, gire el tornillo de ajuste del muelle principal hasta que lo haga.

Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.

That's right, we have another Martin guitar. This time around it's the Martin DCPA4R from their Performing Artist series. This guitar is not really the very best they have to offer, but we feel that it combines all of what makes Martin so unique at a price that isn't impossible to afford. Because there are some insanely priced ones out there from Martin and others, but funnily they aren't the best of the best, just the most expensive.
as an old school country picker i prefer the fender tele for the crisp twangy sound and also the feel of the fingerboard. I find a strat to be poorly designed with the volume control badly in the way to say nothing about the clumsy tremelo arm. I have modified some strats and made them playable for my slyle.A humbucker in the neck position on a tele is rite sharp for the blues.As for gibson they make a fine instrument,just not my style.
It comes in arctic white, fiesta red, black and vintage sunburst, so there’s a healthy level of customization available. Finally, there are three classic Strat single coils, two volume knobs and a tone knob. Accompanying that is a five-way selector switch, so you can dial in your tone and fine tune it with the knobs. It all comes in a really nice package that will feel really good right out of the box. You really can’t go wrong with a classic like this. 
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.[24]
Like a door that's repeatedly opened and closed, you'll sometimes need some basic maintenance. Ensure everything is tight, and get some electronic contact cleaner (available at any electronics store), various screwdrivers and wrenches and you can often solve your own problems. It's easier on a Gibson Les Paul (with backplate access to the controls) than on a Gibson ES-335, but it can be done.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars: kay vintage reissue guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"kay vintage reissue guitars","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category2"}

This D-15M dreadnought features a solid 'genuine' (South American) mahogany top over A-Frame X bracing; the same material is used for the back, sides and neck. The neck profile is a 'modified low oval', and it's hard to imagine anyone having a problem with it. Bone nut and saddle: check. Vintage-style, open-gear tuners check. Super-thin matt nitrocellulose finish all over: check. Tonally, there is a rich and projecting core sound that's complemented by the unmistakable, Martin D-resonance. It's vibrant and ebullient, yet not brash; warm and full without being thick or indistinct. It puts every single cent of its build budget into making the best sounding and playing instrument, with very little concession to cosmetics, electronics or anything else. Solid woods, improved neck joint, bone nut and saddle, no frills whatsoever, save for the 'burst – it's unreservedly recommended.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.
Overdrive / distortion pedals are one of the most important effects on your board and are very much a personal taste. The ones on my pedal board change all the time, I have more than a few that I really like; Analogman King Of Tone, Pete Cornish SS-3, Ibanez Tube Screamer, Boss Blues Driver, Nobels ODR-1,  Zen Drive, MXR Distortion +... and I like and use all of them. Probably my all-time favourite os the King Of Tone, but on a budget, the Nobels ODR-1 is great value and runs with the very best!
I listen to a lot of internet radio, from soul to death metal. I think it's good to listen to a wide variety of music, even if you're not particularly into certain genres. Each genre has its own qualities when it comes to guitar, so spend time just... listening. Listen to how rhythms, chords and solos are used. You may not know how they're doing it just from listening, but you might like the sound of something which you'll then be inspired to go and investigate independently.

There’s a common belief that certain strings are better for beginners than others. While nylon strings can be easier on beginner’s fingers, the main thing that matters when it comes to guitar strings is the style of music you are planning to play, because the difference in feel and sound between the two materials is significant – even for a beginner.


Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?
When using multiple microphones, always remember to check for phase cancellation, and keep in mind that a 2-8kHz boost is probably all that's necessary at mixdown for enhanced electric guitar presence within a track. A small amount of delay (1ms = 12") on an ambient mic track will increase the perceived ambient distance of the microphone without actually moving the mic. This trick works well when blending close and ambient microphone tracks during recording or mixing.
Here we have a wonderful vintage 1971 Yamaha FG75 Nippon Gakki this one is from the famous Red Label series by Yamaha well know for Quality Marty like sound made affordable by Yamaha Japan over 45 years ago this guitar has well aged woods not the Faux aged “gassed pressed” high Tech way they are trying to re-create the naturally sweet aged tone that “Old aged instruments can provide “ This one was aged the old fashioned way over decades of time and as a result a surprisingly big sound is produced by this smaller bodied Grand concert like size of the Gibby LGO- but sounds even better for less dough …..Just in Excellent vintage 45+ year old Vintage Red Label Nippon Gakki FG75 .. this baby makes an excellent Parlor style guitar thats fun to play because of its real good play action, and it sounds great... JVGuitars upgraded to Martin bone Nut and compensated saddle and upgraded fancy bridge pins that improved its resonance too .... not a crack, plenty of patina with minor superficial nicks or scratches and such as seen absolutely but no structural damages ... this one plays very nicely and is ready to enjoy .... for a song contact Joe to buy at Joe's Vintage Guitars at: jvguitars@gmail.com .
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
I was a guitarist for almost 18 years now I am a session musician. For me choosing the best string gauge is one of the most important things a guitarist should know. During those early years our band tends to play on Heavy metal music and if you are using those lighter string gauge its ineffective for those kind of genres. So at that point I have been using .011 or .013 string gauges to gain fat tones and huge sustain. But however as years goes by we tend to play lighter music so I am using .09 and .010 string gauges. For me using those heavier strings for a long time will cause damage in your wrist, after acquiring a carpal tunnel syndrome I have used lighter strings in my guitar.

ESP is another huge brand in the realm of electric guitar, with huge bands like Metallica, The Rolling Stones, Deftones, Lamb of God, and Slayer endorsements in full swing. Any fan of this kind of acts will be very interested in starting with an ESP of their own. Like Fender and Gibson, ESP has a more affordable range known as LTD. This kit includes an electric blue H-51 guitar with 24 frets and dual humbuckers, as well as a 12 pick sampler set, gig bag, guitar stand, strap, 10-foot instrument cable, and a tuner.
This cutoff is based on the average used price on Reverb over the past year, and while the $1000 cutoff is relatively arbitrary, it is as good a point as any to divide between entry-level gear and more heavy artillery. Here again, we are not combining wattage and cabinet size variations on the same models, which inherently decreases the ranking of any amp series with a multitude of different configurations.
The ADA MP-1 was a legend for it’s superior versatility at the time of it’s release. Since first becoming available during the 80’s, players vied after it for it’s midi switching capability via footswitch. Paul Gilbert is most famous for his loyalty to the amp during the spawn of his career.  It runs on two 12AX7 preamp tubes and has three main voicings — Solid State, Clean and Distortion. One downfall of this amp stems from it’s lack of an input volume control, but thanks to a host of mods available nowadays for this thing, one can look really look past this minor flaw. On top of that, you can find them used for around $250! A steal for 80’s tone-in-a-box.
Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.
Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
A full step down from standard. Used by bands such as Korn, Paradise Lost, Dream Theater (on "False Awakening Suite" and "Illumination Theory" from the self-titled album), Emmure, Obscura, ReVamp, and Fear Factory (on most songs from Obsolete and Digimortal, "Drones" and "Bonescraper" from Archetype, "Moment of Impact" from Transgression, and most songs on Mechanize, The Industrialist and Genexus)
Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration. To produce this relatively "clean" sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional "Headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called "switching amplifiers."
A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies.  The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well.  This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.
Yamaha’s Pacifica Series spans many ability levels and price ranges, with notable models such as the entry-level PAC112 proving one of the most popular beginner’s guitars on the market. Then there is the RevStar Series, which launched in 2015 – another beautiful collection, inspired by the street-racing motorbikes of London and Tokyo in the sixties.
Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
This cutoff is based on the average used price on Reverb over the past year, and while the $1000 cutoff is relatively arbitrary, it is as good a point as any to divide between entry-level gear and more heavy artillery. Here again, we are not combining wattage and cabinet size variations on the same models, which inherently decreases the ranking of any amp series with a multitude of different configurations.
’71 blue vinyl combo guitar amps included the Univox 1040 and 1240. The 1040 Guitar Amplifier ($480) was a combo sporting 10 tubes, 105 watts RMS, two channels, four inputs, volume, bass, middle, treble controls for each channel, presence, reverb, tremolo, footswitch, and two 12″ Univox Heavy Duty speakers with 20-ounce Alnico magnets (possibly Jensens). The illustration shows a grille with two small circles on top and two large circles for the speakers. It’s possible this had a pair of tweeters in the small holes, but the description doesn’t say. The 1240 Guitar Amplifier ($399.50) featured eight tubes, 60 watts, two channels with the same controls as the 1040, and four 10″ Univox Special Design speakers with 10-ounce ceramic magnets (again, sound like Jensens). The grille had four round cutouts.
Valve amplification is more or less linear—meaning the parameters (amplitude, frequency, phase) of the amplified signal are proportional to the input signal—so long as the voltage of the input signal does not exceed the valve's "linear region of operation". The linear region falls between "1." the saturation region: the voltages at which plate current stops responding to positive increases in grid voltage and "2." the cutoff region: the voltages at which the charge of the grid is too negative for electrons to flow to the plate. If a valve is biased within the linear region and the input signal's voltage exceeds this region, overdrive and non-linear clipping will occur.[40][43]

Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.


In his early days, Jimmy James, as he was then known, played in rhythm sections, backing artists like Little Richard, B.B. King and Ike and Tina Turner. It isn’t until 1966, when he moved to London and formed the Experience, that Jimi Hendrix was able to cut loose and start getting the attention he deserved for his magnificent guitar work. Alarmingly, Hendrix was virtually unknown in the U.S. until he played at the Monterey Pop Festival in 1967—the legendary performance in which he doused his Fender Stratocaster with lighter fluid and set it on fire.
Even working on the assumption that you're only using one mic, the professionals have an awful lot to say about where you might put it. For a start, it seems to be fairly common practice to audition the different speaker cones of your guitar amp. "They're supposed to sound the same," says Roy Thomas Baker, "but if you're using a 4x12 cabinet, each of these four speakers may sound different."
Guitarists love to get loud. I remember when I got my first electric guitar, I took it and my amp out onto my grandmother’s back porch and did my best rendition of The Man Who Sold The World, over and over again — at full blast — for several hours. In suburbia, in the middle of the day, I didn’t receive a lot of complaints. If I tried that today, in my Los Angeles apartment surrounded by grumpy neighbors, I might not be so lucky.
{"id": "114572014", "categoryId":"site5AAG", "name":"Used S421 S Series Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/S421-S-Series-Solid-Body-Electric-Guitar-114572014.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/S421-S-Series-Solid-Body-Electric-Guitar/000000114572014-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"239.99", "priceMin":"239.99", "priceMax":"239.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"159269514523", "priceVisibility": "", "itemType": "Used"}

Much of the difference between one make of guitar and another is in the player’s head. I doubt whether many people listening would really notice the difference and they certainly wouldn’t care. That said, there are differences in feel and in the player’s perception of the sound. I currently have four Gibsons and two Fenders, so you can see where my sympathies lie, but currently I’m more taken with either of my two Gretschs. One point of correction about scale length though. Over the years 25.5″ became standardised, probably by Martin. Fender copied this when it produced the Broadcaster/ Nocaster/ Telecaster since 25.5″ was the scale length for a guitar and Fender had no previous experience hence the poor neck radius and bad controls. Gibson, being actually considerably more innovative (I.e. the truss rod, the archtop, the raised finger rest/ scratch plate, controls for each pickup etc etc in fact most of the fundamentals we now take for granted) had worked out that scale length should be a function of body size. All of Gibson’s full size (17″ and up) guitars have 25.5″ scale lengths. Smaller bodies get shorter necks. So 24.75″ is only one of Gibson’s scale lengths sunce it has used shorter and longer as appropriate.
During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
There's no reason not to try an effect if you want to. Sure, some kind of effect might mask some bad habits (reverb and delay might sort off mess your timing), but distortion for example is almost like playing another instrument, and if you're into punk/rock, the sooner you try it the better. You will have to figure out ways to mute the strings and reduce string noises, which is part of the technique.

As their categorical name suggests, extended chords indeed extend seventh chords by stacking one or more additional third-intervals, successively constructing ninth, eleventh, and finally thirteenth chords; thirteenth chords contain all seven notes of the diatonic scale. In closed position, extended chords contain dissonant intervals or may sound supersaturated, particularly thirteenth chords with their seven notes. Consequently, extended chords are often played with the omission of one or more tones, especially the fifth and often the third,[92][93] as already noted for seventh chords; similarly, eleventh chords often omit the ninth, and thirteenth chords the ninth or eleventh. Often, the third is raised an octave, mimicking its position in the root's sequence of harmonics.[92]
One of the very first things you will play is either an open C or and open G in standard tuning. These are chords and serve as the very fundamental unit of song construction. Getting a new player up and running with a few chords they can strum is one of the first sign posts on the way to playing. It’s pretty rewarding to get that G to ring out clearly. That said, the greatest guitar masters use moveable chord forms to construct thoughtful lead work and intricate guitar lines.
In recent years,[when?] guitars and basses with multi-scale or fanned-fret fingerboards started to appear. These instruments are supposed to offer an advantage over the classical fixed-scale guitars and basses by providing more freedom in setting the tension of each string at the design and manufacturing phases. This may result[according to whom?] in a more uniform tension of the strings, as well as possibly[weasel words] offer timbre and tonal characteristics somewhat different from the usual fixed-scale instruments.

With a typical Strat single coil pickup and assuming an instrument cable capacitance of 500pF, 250K tone pot, 0.022uF cap, guitar plugged in to a 1Meg input, the range of the tone control is roughly from 6.0kHz -3dB (tone fully clockwise – with a resonant peak of +7.4dB at 3.9kHz) to 950Hz (tone fully anti-clockwise – with a resonant peak of +4.5dB at 594Hz). These figures vary from pickup to pickup and depending on the instrument cable capacitance.


I have been a musician for many years now. I have played in everything from metal bands to acoustic coffee house sets to worship/praise bands. I feel that with these many years of playing I have earned a sharp ear, no pun intended. By that I mean that I have developed an ear not only to hear pitches, tones, and notes, but I can also hear good and bad timbre. I feel that Taylor guitars simply produce the best timbre of any acoustic guitar I have played. Naturally, all of my acoustics are Taylor! With that, thanks to Bob Taylor for doing it best and doing it right the first time!
The body of the PRS SE Standard 24 is made of mahogany and features a tobacco sunburst finish, vintage cherry, or translucent blue finish. Compared to most other body styles, this one is a lot more comfortable to play even though mahogany isn't the lightest tonewood out there.  The balance offsets any weight issues. The neck is a maple piece that comes with a standard rosewood fretboard and PRS classic bird inlays. The pickups PRS chose for this build are their S2 HFS Treble and S2 HFS Vintage Bass units. Their performance and color are pretty unique when compared to other designs out there. Looking at the hardware, we see a PRS S2 tremolo bridge on one end, while the headstock houses a set of PRS S2 locking tuners. Combined, these two components give you the ability to achieve great tremolo effects without losing intonation or tuning.
Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.

Overdrive originally resulted from the natural breakup that occurred when a tube amp received an overly hot signal from a guitar. This pushed the tubes to deliver a subtle, warm breakup. Generally overdrive is a more subdued, natural form of distortion. While you don’t have to use an overdrive effect with a tube amp to get a great sound, the combination of the two can produce a rich, pleasing tone that many guitarists prefer. The first overdrive effects were designed to push more signal into a tube amp, giving it the very throaty, mid-range tone associated with Stevie Ray Vaughan. With that in mind, many of today's pedal makers have created circuitry to add that desired tone when used with a solid state amps as well. Since overdrive is a signal boost, adjustments from your volume knob will create a variety of different sounds.


This guitar has a maple neck which is coated with a thin satin finish and has a C-design which is easy for beginners to handle. It features an alder solid body. The vibrato design is enhanced with the addition of block saddles for adding firmness to the tone. They also give a precise breakpoint for the strings. Speaking of pickups, the PAC 112v is equipped with a 5-way blade pickup selector. There are master tone and volume controls for the neatest output. This guitar is available in seven finishes, natural satin, old violin sunburst, raspberry red, sonic blue, black, and silver metal.
SG Special is pretty much the same thing as the Les Paul 100. The most obvious difference is the body style. Other than that, you get very similar electronics and overall build quality. A lot of people learned their first chords on this guitar, still keeping it as one of their favorite axes. I’ve played this thing a few times and it definitely has some juice.
Fuzz is an indistinct, nasty overdrive that is synonymous with Jimi Hendrix. The Dallas Arbiter Fuzz Face is the most famous fuzz pedal, known for the way is breaks up and adds something special to any guitar tone. Fuzz pedals are most commonly used on top of clean or lightly overdriven tones, as this is where the character of the pedal can really come through; used on top of already distorted tones they can be great for making a load of noise! Two main types of fuzz are available – silicon (which sounds softer and more rounded) and germanium, which sounds harsher and more treble-y.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple & Wenge - Neck Construction: 5 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: Jumbo - Inlay: White Dot - # of Strings: 7 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Gibraltar Standard II-8 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Circuit Type: Active - Pickups: EMG 808 - Pickup Configuration: H-H - String Instrument Finish: Cobalt Blue Metallic, Galaxy Black - Made In: Japan
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Stewart MacDonnald has a great finishing schedule that I would recomend reading before you start the painting process. You shouldn't need to fill any pores on the neck because necks are usualy made from maple which is a tight grain wood. All that's need for it is a sanding with 220 grit paper unless you want to leave the neck natural and unfinished. I recomend using at least a few coats of sanding sealer of clear gloss laquer to protect the wood fromdirt and grime that comes from playing.

Like his conversational singing, Willie Nelson's guitar playing is deceptively laidback, playfully offbeat and instantly recognizable. Amazingly, Nelson has been playing the same Martin M-20 classical guitar, nicknamed Trigger, since 1969; it has defined his sound, a nylon-stabbing mix of country, blues and Django Reinhardt's gypsy jazz. Though the guitar now has a large gaping hole, Nelson still plays it nightly. "I have come to believe we were fated for each other," he said. "The two of us even look alike. We are both pretty battered and bruised."
Originally delay was achieved using a loop of magnetic tape - first on improvised arrangements with a reel-to-reel recorder, and later on dedicated machines. The tape would pass through a recording head, then a playback head, then an erase head. The timing of the delay could be adjusted by moving the heads, or changing the speed of the tape. Tape adds its own colour to sound, so the echo would have that added warmth.
After years of analogue delay companies decided that it was not clean or accurate enough. So they came up with a much sturdier design with digital delay chips.Not only can these get the timing down perfectly every time but they can also cover a wider range of delay options. Depending on the chip inside you can easily get multiple seconds of delay time in a single pedal.The main downside to these is that they can sound a bit clinical and too clean. Manufacturers have battled this by adding in different modulation options on delays like this to give it more character. If you want a delay for every possible scenario digital might just be the way to go.
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: lotus","pageName":"[gc] shop by brand: lotus","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop by brand: lotus","prop1":"[gc] shop by brand: lotus","evar51":"default: united states","prop10":"brands","prop11":"lotus","prop5":"[gc] shop by brand: lotus","prop6":"[gc] shop by brand: lotus","prop3":"[gc] shop by brand: lotus","prop4":"[gc] shop by brand: lotus","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] site section"}

And therein is the VST guitar's edge, as it continues to improve in quality, not matching that of performances by the late Jimmy or the long-standing Carlos or whomever one adopts as their personal guitar deity, but bringing in new qualities of its own. In computer science terms, improved controllers are providing ever more interesting views of ever more detailed models to listeners attuned to the particular environment augmented by the virtual model. The guitar VST is not your daddy, but it might be the little sibling with your daddy's eyes. In the long run.. well... forget that. We love you pops. My little sisters, brothers and I hope you live forever, or at least as long was we do.
For example, bass guitar frequencies are on the relatively low end of the tonal spectrum. However, plucking a bass string can create a sudden, short burst of high and mid-frequency sounds. You need your bass amp to be loud enough to make those low-frequency sounds strong and audible in the mix, but you don’t want to flatten your band mates or blow out your speakers by sudden pops of high-frequency sounds.
Distortion and overdrive: Distortion and overdrive units re-shape or "clip" an audio signal's wave form so that it has flattened peaks, creating "warm" sounds by adding harmonics or "gritty" sounds by adding inharmonic overtones. In tube amplifiers, distortion is created by compressing the instrument's out-going electrical signal in vacuum tubes or "valves".[52][53] Distortion pedals produce perfectly flattened peaks or "hard" clipping. Overdrive pedals produce "soft” tube-like distortion by compressing the sine wave without completely flattening it. Much like tube amps, overdrive units produce "clean" sounds at quieter volumes and distorted "warm" sounds at louder volumes. Distortion and overdrive pedals may either be transistor-based or digital.[54][55] While distortion pedals are most associated with electric guitar, they are also used with bass guitar (fuzz bass), Hammond organ and electric piano.

Paint chips and cracked binding: Common on older instruments. Over time these openings will collect sweat, polish, and dirt, causing discoloration, lifting of the edges, and further deterioration. It is best to clean these spots w/ naptha (lighter fluid)or alchohol, remove any loose edges around the chips before cleaning (they will be holding polish and grime preventing the glue from working), then seal the chips and cracks with thin superglue. Super glue can be heated in the microwave for a few seconds (plastic bottles) to make it flow better. Drop Filling is a technique for filling chips with paint. This is covered at the ReRanch site.
For example, Al Schmitt starts with the traditional SM57 close mic, on axis but a little off the centre of the cone. "Then I'll put a really good mic up — maybe a Neumann U67 or an M50 — for the room... It could be anywhere from 15 to 20 feet away." It's worth noting that the M50 is an omni microphone and, although the omni polar pattern is only very occasionally mentioned for close-miking, it makes a much more sensible choice for capturing natural room ambience.
Now that said, the orientation of the individual saddles does have some significance. In an ideal world, you would have all of the saddles sitting with the flat side facing the pickups. This is so that there is an immediate fall-off as soon as the strings clear the saddles so that they vibrate as cleanly as possible. At the same time, the fall-off towards the stop bar tailpiece is a little more relaxed and possibly a little more forgiving on your strings. In the real world, however, you may have to swap one or more around in order to intonate the guitar properly, and this is more important.

Southpaw Guitars has over 900 Left Handed Guitars and Basses In Stock at any time. At Southpaw Guitars you will find a knowledgeable friendly sales staff to provide Service, Assistance, and Guidance as you purchase your Dream Guitar. Furthermore, You will not be greeted by hold music, transferred between departments, treated discourteously, or given the sell what we have routine. We are conveniently located in Southwest Houston. 713-667-5791

Rule 1—There are no rules. The sound you’re after might not be made by what we could call the appropriate or logical signal path, but that’s not always the issue. The issue is this: what does it sound like? If it makes the sound you’re after, then it’s right…although, you may have to do something about the noise. Traditional pedal board arrangements were designed for certain reasons, and keeping the noise down is one biggie. Following the principles of how sound is made in physical space is another (see Rule 4 coming up). But the final choice is yours. As a very wise man said: if it works, don’t fix it.
Looper pedal: A looper pedal or "phrase looper" allows a performer to record and later replay a phrase, riff or passage from a song. Loops can be created on the spot during a performance (live looping) or they can be pre-recorded. By using a looper pedal, a singer-guitarist in a one person band can play the backing chords (or riffs) to a song, loop them with the pedal, and then sing and do a guitar solo over the chords. Some units allow a performer to layer multiple loops, enabling the performer to create the effect of a full band.[87] The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studio producers who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.[88]
Probably one of the greatest is Glenn Schwartz, formerly of the James Gang and Pacific Gas & Electric. Considered to be a "white" Jimi Hendrix, he was asked by Jimi to play at what was to be his last birthday party. Glenn played behind his back and with his teeth (now with his gums) before Jimi ever did. Now out of the limelight (and out of his mind) Glenn plays (and preaches) on Thursdays at a blue collar bar in Cleveland. ONE F*CKING INCREDIBLE PLAYER. Should be on any list.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.
Then, in the late ‘60s, two things happened. First, Unicord was purchased by conglomerate Gulf+Western around 1967. Then, Unicord was merged with a company called Merson, which housed brands like Tempo, Giannini and Hagstrom. It’s not certain what the exact timeline of these events were, but once the merger occurred, Univox up and moved its production from New York City to Westbury, NY. However, that didn’t stay static for long.
This is another 6 stringed electric guitar form the Givson brand. It is a right handed model and is wooden in color. It has a solid body of basswood and kneck of rosewood. It is provided with high quality cover and the best part is that the guitar is budget friendly. Prices range from around INR 7,100 depending on the prevalent market factors such as whether there are offers or discounts available. You can find more details regarding this model by clicking on the link below:
Particularly if you want to get into recording and production, this Blackstar model is ideal. With six distinct “voices” from Clean Warm to OD2, as well as 12 stereo effects, there is a huge range of tones and options to play with. Together with the patented ISF control it allows for a nuanced choice of timbres, allowing you to immerse into exactly the sound you are after in gloriously deep Super Wide Stereo.

Understanding how to read electronics schematics is the key to being a successful DIY pedal builder. A schematic will show you what components are needed for the build, as well as how these parts are hooked together to create (in this case) an effect pedal circuit. At first glance, a schematic may look like a bunch of hieroglyphics, compiled of various symbols, numbers, and letters (see below). Don’t fret! – After a bit of practice, you should develop a basic understanding of how a schematic works, and you will be putting together DIY effect pedals in no time!

Squier Affinity Stratocaster has all the same features of the Fender Stratocaster guitar at a highly affordable price. It has a maple neck and an alder body which gives it a snappy Strat tone. It also has three single-coil pickups that can be manipulated by a 5-way switch. A vintage style tremolo system makes it a great choice for those who like that system.
This technique is only possible with 4-conductor pickups or pickups that already have coil-tap lead instead of all four leads. Coil tap is a connection between two coils in a humbucker and is sometimes referred to as “series link”. Vintage style pickups have their coil tap enclosed in the pickup which means that we can’t play with it. Having coil tap gives us a couple of wiring options:

: Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.


I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.
Ibanez Mikro GIO Electric Guitar in Black w/ Bag. The guitar is in good working condition does have few marks and one nick. Does not include stand just used to take pictures. Includes guitar strap and Ibanez bag. Please contact me if you have any problems with your purchased item and I would be Happy work with you to help make your Transaction a Pleasant Experience.           Please check photos carefully and use the enlarging tool. Some photos are taken with a flash and may cause the image to appear darker in some areas. Photos are an important part of the description and the condition of each item.Thanks for Looking!!           Also please verify the correct shipping address before bidding. Payment is expected within 48 hours.    
Lastly, we have the bread and butter of Schecter’s mid-range selection. Schecter Omen Extreme-6 is one of their oldest and most popular models to hit the market. This guitar brings a decent balance of price, performance and build quality. While it’s not as fancy as the previous models we have mentioned, as soon as you pick it up you know it’s made for serious business.
Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.
Moving the mic even further back – from a few feet to several – gets into what is generally referred to as “ambient miking” or “room miking.” This can be a great way to achieve even more depth and sense of space in your tracks. Jimmy Page made frequent use of ambient miking in recording his guitar parts with Led Zeppelin, and it was also a major factor in Eric Clapton’s legendary “Beano” tone. The further from the speaker you place the mic, and the more into the center or far side of the room, the great the proportion of reflected to direct sound in the blend, and the greater the sense of “air” and “room” in the sound. Often, it’s combined with a close mic to retain the option of blending in as much punch and directness as necessary, but if you only have one track or one mic available, ambient placement will sometimes do the trick on its own.

There are a couple of tips that can help you out, however. First – as a new learner – you don’t need a stage-ready amplifier or even a high-end boutique amp, as they are both far too powerful and pricey for someone just picking up the hobby. Second, you should look into amplifier versatility. As a new player, it’s likely that you’re still figuring out your own style – and being able to change up your sound without the need for a bunch of extra peripherals is incredibly valuable in figuring that out.
Jump up ^ The Guitar (From The Renaissance To The Present Day) by Harvey Turnbull (Third Impression 1978) - Publisher: Batsford (ISBN 0-7134-3251-9) - p113 (Chapter 3 - The Twentieth Century) - "Segovia's visits to South America also inspired new music. The Mexican composer Manuel Ponce (1882–1948) responded by producing a greater number of extended works than Turina and Torroba had achieved."

Similar to Jackson guitars, B.C Rich is famous for their sharp jagged edges and heavy metal sounds. The influence of their hard rock and heavy metal sound spans decades. Bands such as Motley Crue and Slayer are just a few of the bands that made B.C Rich guitars such a huge staple in the world of heavy metal. When you see the shape of B.C Rich guitars, there is no doubt as to what kind of music is going to come from them. B.C Rich offers a decent selection of guitars ranging from beginner up to pro-level instruments. They even have models that don’t have that signature “heavy metal” jagged style. Most B.C Rich guitars have a mahogany body and at least some of the components are made from rosewood. Obviously, the quality depends on the price, but even their highest priced models could still use a few upgrades to really bring up the sound quality.
{ "thumbImageID": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "defaultDisplayName": "Fender PM-TE Standard Travel Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000138832", "price": "699.99", "regularPrice": "699.99", "msrpPrice": "700.01", "priceVisibility": "1", "skuUrl": "/Fender/PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural-1500000138832.gc", "skuImageId": "PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/PM-TE-Standard-Travel-Acoustic-Electric-Guitar-Natural/K36613000001000-00-60x60.jpg", "imgAlt": "" } ] }
The Epiphone Dove Pro is such a good guitar that it’s going to be a contender for a top pick in pretty much any list, but in this one we’ve given it the title of best value electric acoustic. You can spend a lot more money and not get much more guitar, and you can even spend more money and not get a guitar as good. The Dove Pro is that accomplished.
When I first tried multisourcing, on a solo project by Club Foot Orchestra guitarist Steve Kirk, I used an air mic, a direct source (Manley tube DI box or speaker emulator output from Kirk's Marshall JMP-1 tube preamp), a close mic on a clean-sounding Fender Princeton amp, and close and distant mics on a cranked-up Marshall cabinet (see Fig. 2). And that was just for the first rhythm track! As you may imagine, mixing was a lot of fun, and after that day there's been no going back to the old SM57 shoved up against the grille cloth. If you dare, you can take it from there. The only limitations are your time, the guitarist's patience, and available tracks. Oh yes-and lots and lots of mics.
This brand is originally from Japan and  Hoshino Gakki owns it. Ibanez activates in U.S.A, Japan, China and Indonesia, and it is one of the largest, recognized names out there. This manufacturer has developed over 300 models of electric guitars and has collaborated with many musicians that have lent their imagination to the making of customized units.

They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton

Being part of the Gibson family, Epiphone today makes a variety of officially-sanctioned Gibson classics, including the Les Paul, which comes in versions including the Tribute with authentic Gibson pickups and the Special II with Epiphone's own pickups. There are also Epiphone editions of the timeless Gibson SG, like the G-400 Pro which is available in right or left-handed versions.


At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
The strongest thing I did for Joni as a producer on Song to a Seagull, from 1968, was keep everybody else off of that record. She was a folkie who had learned to play what they call an indicated arrangement, where you are like a band in the way you approach a chord and string the melody along. She was so new and fresh with how she approached it. It's the reason I fell in love with her music. She was a fantastic rhythm player and growing so fast. She had mastered the idea that she could tune the guitar any way she wanted, to get other inversions of the chords. I was doing that too, but she went further. I understood her joy in using bigger tools later – jazz bands, orchestra. But the stuff she did that was basically her, like 1971's Blue, was her strongest stuff. Match her and Bob Dylan up as poets, and they are in the same ballpark. But she was a much more sophisticated musician.  By David Crosby
The old ones were SOLD as cheap guitars. These new ones, at their price points, are probably decent instruments at the very least, and possibly even very good ones. I doubt they have much in common with the Kays from the 70s aside from how they look, which as other people have detailed, is probably just for nostalgia purposes. Lots of aging rockers with fat salaries who might've learned on those guitars a few decades ago!

I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.
Every ZZ Top tour is a treat for guitar geeks, as Gibbons uses the occasions to unveil a six-string surprise. (Last year it was an elusive Gibson Moderne.) But what really makes Gibbons cool is a certain undefinable quality called “vibe.” Anyone who has ever met Billy and gotten to know him—however briefly—has an outrageous story to tell about the encounter.
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.
If you just want to send that current through to the amplifier unchanged, that would mean keeping all volume- and tone knobs turned all the way up. But the knobs can be useful. Underneath the volume knobs, the electrical signal is hooked up to two places; one line goes out towards the amplifier, and the other is effectively contained without being sent to the amplifier. The more you turn down the volume knob, the more of the signal you contain instead of sending it through the amplifier.
The top of the archtop line featured two very nifty new models called the Vegas 40 and Vegas 66. The Vegas 40 (Teisco Del Rey EP-11T) double-cutaway thinline was promoted both in Japan and the U.S. It was a full size ES-335-style with two pickups (the large rectangular type with chrome sides and black insert, square poles), bound f-holes, volume and tone controls on the lower bout (no plastic plate) and a fancy new angular archtop Bigsby and roller bridge. The pickup selector was a rotary switch on the lower horn with a new round knob with a lever (versus the old chicken beak). The bolt-on neck had a new three-and-three head with a flared “check mark” indentation in the top, with wide wings on either side, a shape that would characterize a number of other models later in the decade. The fingerboard was bound, with dots. On the Japanese version, the headstock carried a zippy new typeface proclaiming “Vegas 40,” while the pickguard used a similar angular script for the Teisco logo. The Teisco Del Rey carried its regular sticker.
My cousin Mike had a red Lotus LP Custom copy that his mom got for him, it was a bolt-on one, looked just about like the one you have in your pic. It played pretty nice, but the tuners and pickups sucked. We added a set of Grovers and a pair of (then popular) DiMarzio super 2 pickups. Mike used this Lotus guitar for 3 or 4 years until he got a Guild s-100. He sold the Lotus for 125.00 after taking off the DiMarzios and Grovers. He gave me those parts and I installed them on a stripped and mutilated 71 SG Standard that I painted with auto enamel (a nice Candy red). I later sold the SG to Mike. The lotus had a plywood body and was pretty cheap, I wouldn't pay a 100 bucks for one today, if anything. But, back then, it was as good as any, we worked with what we could get. I know we played some excrutiating unison leads (ala Blackfoot, Molly Hatchet,etc) he with his souped up Lotus, me with my Memphis Strat copy, both plugged into my bitchin solid state Crate (looked like a real wooden crate!) amp.
This package features an iconic electric guitar—The Les Paul— paired with a great little practice amplifier, the Electar-10, and quality accessories. The Epiphone Les Paul Special II is a versatile guitar that feels comfortable covering most any major style, including rock, blues, punk, classic rock and more. The guitar features a dual humbucker pickup configuration. The package also includes a tuner (very important), guitar picks and free online lessons to get you playing right away. A cable, strap and gig bag complete the package.
There have been several changes in the amplifier world since we last took a look at this mega amp article, spurring us to refresh a lot of content. We have replaced some models in our top ten chart, such as the Bugera Trirec and the Vox AV15, with a host of new additions. These include classic combos like the Fender Champion 100 and the Vox AC15C2, with some awesome heads such as the EVH 5150III and the Boss Katana, as well as the super portable Roland Cube Street.

But no all are created equal, and I don’t really do this — I have live performance gear for anything I do, actually, way more than I need at this point. But a good friend of mine does the whole live-thing-throug-PC and has completely sold his soul to Ableton Live (Music production with Live and Push). You can find Ableton Live Intro online for about $99. It’s not just a live performance tool but also a DAW, you can use it for recording, composing, etc. Again, not one I use, but probably what you want if you’re going for live playing.


A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.
Alibaba.com offers 169 korean electric guitars products. About 86% of these are guitar, 5% are guitar parts & accessories, and 4% are other musical instruments & accessories. A wide variety of korean electric guitars options are available to you, such as paid samples, free samples. There are 169 korean electric guitars suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of korean electric guitars respectively. Korean electric guitars products are most popular in North America, South America, and Eastern Europe. You can ensure product safety by selecting from certified suppliers, including 6 with ISO9001, 4 with FSC, and 1 with GSV certification.
For example, if you plug into a .7V power amp and you get good sound – great! However, if you plug into a 1.25V power amp and find the signals are weak, it’s not the tonal lack of the power amp that’s the problem. The preamp signals are too weak to be driven to the powerful 1.25V power amp. The issue is the sensitivity input of the power amp is too high for the preamp to be driven well.

After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.

The 600 series pairs maple back and sides with a spruce top that has gone through Taylor’s torrefaction process, which accelerates the wood’s aging process through heat. We couldn’t find a single fault with this guitar’s build quality and the 612ce is an unbelievably comfortable guitar to play. The tone is still that of a maple guitar, but a more refined one than we’re used to. Likewise with the torrefied spruce: it’s immediately familiar, but with enough difference to cause a cocked ear. Strumming out chords and standard singer-songwriter fare was pleasing, and it put in a good shift with some country-style flat-picking, but it is fingerstyle playing that this guitar lives and breathes. By any token these models from the 600 series are stunning guitars. They have a laudable ecological footprint, they look superb and they have rich, unexpected tonal qualities. 
We guitarists can be slow to come around to new ways of doing things, heck we still prize the 1904 technology of the vacuum tube in guitar amplifiers, so it's a huge testament to Ovation's success that they've managed to be so successful while breaking the most sacred rules of guitar material and construction. Great examples of this are their Celebrity Elite CE44 and their entry-level Applause Balladeer AB24.

The Ultimate Beginners Series gets aspiring musicians started immediately with classic rock and blues riffs, chord patterns and more. Now, for the first time ever, Basics, Blues, and Rock are combined in one complete book and DVD set. Follow along with 4 hours of DVD instruction and 3 hours of audio tracks, with the help of on-screen graphics and printed diagrams. The Ultimate Beginners Series: Electric Guitar Complete takes you from picking to soloing and power chords. If you're serious about mastering the blues and rock styles, this book and DVD set is a must-have.
Artwork: George Beauchamp's original "frying-pan" electric guitar design from 1934. On the right, you can see a top view of the guitar with the pickup unit shown in dark blue and the pickup coil (green) sitting underneath the six strings (shown in orange). On the left, there's an end-on, cross-section of the pickup unit (looking down from the head of the guitar toward the bridge). You can see that Beauchamp has used a pair of horseshoe magnets, with their north poles (red) and south poles (blue) aligned and the strings threading between them. The pickup sits between the magnets under the strings. From US Patent 2,089,171: Electrical Stringed Musical Instrument by George Beauchamp (filed June 2, 1934, issued August 10, 1937). Artwork courtesy of US Patent and Trademark Office.
The SIX6FDFM’s jaw-dropping aesthetics belie its price tag. It has an arched flame maple top on a bound mahogany body, a bound ebony fretboard, and a three-piece maple/purpleheart neck that has a colorful streak running down the middle. Only a Blue Space Burst finish is available, but, coupled with a matching headstock, it looks good enough to lick.

Why would that be “magical thinking”? Unless you play a sine wave with a synth, the timbre of every instrument is made of a set of freuquencies, a dominant frequency plus a ton of harmonics (which is, I take it, the overtones people talk about). Woods, like every other material, resonate at particular frequencies, and consequently might emphasize a particular subset of these frequencies rather than another subset. Hardly magical thinking.
Silk strings and Steel strings are described as a mixture of classical and steel strings, and are also called “compound strings.”  They have a mellow sound and lower tension that provide the feeling of a classical guitar, while still providing the brightness of the metal of a steel stringed acoustic.  The term silk is referring to the nylon used to make classical guitar strings, which we will learn about next.
You wouldn’t guess that this is a low-end electric acoustic, even on close inspection, because the build quality is superb. This translates to some great tone. While it might not have quite the same ring and sustain as an expensive model, only real audiophiles are likely to notice. You get a solid spruce top, good quality hardware, and Fishman electronics.

On round hole martin guitars, the serial and model numbers are stamped on the neck block inside the instrument. The number can be seen by looking inside the sound hole. Look at an angle towards the neck. All f-hole Martin archtops have their serial and model numbers stamped on the inside center of the backstripe, roughly under the shadow of the bridge (and best seen from the bass side "f" hole).
A plucked string has many modes of vibration which all occur simultaneously; most of these correspond to overtones or harmonics of the fundamental frequency of the vibrating string. Near the center of the string, the fundamental frequency has the largest amplitude; a pickup at 1/4 of the length of the string will be at the point of maximum amplitude of the second harmonic and at a null point for the fourth harmonic. This position gives a strong, full, mellow tone. A pickup at 1/8 of the length of the string (closer to the bridge) will be at the point of maximum amplitude of the third harmonic, and will also get a lot of the fourth and fifth harmonics. This gives a much brighter tone. The change in tone caused by plucking the string close to the neck versus close to the bridge is based on the same idea: bringing out the harmonics in the string in different proportions. See link to a related article, below.
This is a product of Colorado USA, every detail of this guitar was hand painted with waterproof organic non led based paint. It is brand new fully functional acoustic guitar. Become the center of attention on your party with this beautifull vibrant instrument. Perfect for a present (Christmas, Valentine, or b-day) for your loved one, family or a friend. Come in to the magic world of music with this beautifull hand painted acoustic guitar. Fill the positive energy of Marcy's artistic story through your song.  The artist Marcy Snow all the way from Colorfull Colorado presents you this unique hand painted acoustic guitar .

All beginners and intermediate instruments are expected to have some notable accessories that will aid the paying process, and the LyxPro didn’t disappoint in this regard. It comes with all the necessary tools that will aid your playing right away, and these include; tremolo bar, 2 picks, shoulder straps, and carrying bag for proper storage and comfort.
The new HT Club 40 looks familiar, but practically every detail has been worked on and sweated over. The control panel has separate channels for clean and overdrive, with two footswitchable voices on each channel. There’s also a new, low-power option, which reduces output from around 40 watts down to just four watts. Global controls include a master volume and level control for the Club’s built-in digital reverb. On the rear panel, you’ll find extension speaker outlets and an effects loop, with new features including a USB recording output together with speaker-emulated line outs on jack and XLR. The MkII’s clean channel has a completely reworked architecture with two tightly defined voices, best described as classic American and classic British, which can be pre-set on the control panel or footswitched. Although only one button is pressed, lots of changes happen inside, including preamp voicing, EQ and valve gain structure, as well as the power amplifier damping.  A similar thing happens on the overdrive channel, with a choice of two voices called ‘classic crunch’ and ‘super- saturated lead’, which can be infinitely tweaked between Brit and USA response using Blackstar’s patented ISF control. Like the clean channel, these voices have been reworked to be richer and more responsive. In use, the HT Club 40 MkII is jaw-droppingly good - while the MkI version was efficient if a little bland sometimes, the MkII is full of character and attitude, with astonishing tonal depth and response that will have many top-dollar boutique amps struggling to keep up.
Many music purists prefer analog effects. Since they don’t use digital conversion, the signal (purists argue) is less prone to loss, and is more pure as a result. It’s true that digital conversion can cause some natural artifacts of the original sound to become lost, and can sound more “processed.” However, as digital technology has evolved, this has become less of a consideration. Digital effects have the advantage of versatility and precision. Today’s multi-effects processors only exist because of digital processing; many effects can be achieved in a single unit through sheer processing power. Digital signals can also be used to control a wider range of parameters.
Rather than being period-correct reincarnations, Fender's Original series aims for a ‘best of decade’ vibe. So, this Strat is alder bodied with a ‘round-laminate’ rosewood fingerboard that was implemented in mid-1962. In a mid-'60s style we get Pure Vintage ’65 Gray-Bottom single coils on an 11-screw mint-green pickguard with aged white controls. Meanwhile, a concession to modernism is the second, lowest, tone control, which originally would have been for the middle pickup, but here works on both the middle and bridge pickups. Another 'modern' inclusion is the ubiquitous five-way lever switch, which didn’t actually replace the original three-way switch on the Stratocaster until 1977. We defy anyone who opens a case and sees one of these beauts not to have an ‘OMG’ moment. The guitar that launched thousands of dreams back in the day still impresses 64 years on. You’ll find these ‘fixes’ on many Fender Custom Shop models, of course, but while these don’t come with any ageing or relic’ing they are significantly cheaper. Yet, viewed from a 2018 perspective, it gives Fender’s USA models a rare unity, a vintage nod to the escalating modernism
 of the Professional and ultra-tweaked and posher Elites. If you hanker after a new USA-made production Fender and want the most vintage-spec possible, this is now it. Vintage-inspired, yes, but with the fixes that many players will embrace.
HERE WE HAVE A TOTALLY  COOL 50’s HARMONY STRATOTONE PEANUT MODEL SOLID BODY GUITAR......ALL ORIGINAL: TUNERS, TAILPIECE, PICKGUARD, ETC...PICKUP DATED 1957...COOL COPPER RELIC LOOKING FINISH...STRAIGHT NECK GOOD ACTION..FREE US48 SHIPPING WITH BUY IT NOW...S H $60...**WE SHIP INTERNATIONAL** NO PROBLEM...LOCAL PICKUP OK...ANY QUESTIONS EMAIL US OR TEXT/CALL 305.773.4539...CC & PAYPAL OK... BE SURE TO CHECK THE BANANA GUITARS EBAY STORE FOR MORE COOL STUFF AND WATCH FOR MORE COOL GUITARS I WILL BE LISTING...THANX&ENJOYIT! ALL IMAGES & DESIGNS PROPERTY OF  BANANA GUITARS INC. RETURNS ACCEPTED AS PER EBAY  RULES ONLY IF NOT AS DESCRIBED

Some Craigslist and EBay sellers have been claiming the 500 and 600-series Kents are made by Teisco. I think we’ve shown that that’s not the case. Some sellers also describe those early Kents as having “Ry Cooder” pickups. As most of you know, Ry Cooder is an incredibly talented multi-stringed-instrument musician. David Lindley, another great talent, gave him a pickup from an old Teisco guitar. The photo at left is exactly like it. Cooder put the pickup into one of his Stratocasters and liked the sound so much that he got another one and put it into another Strat. These pickups are also described as “gold foil” pickups. There are variations in the pattern of cut-outs on the chrome covers of different pickups. I don’t know if the others sound any different, but if I were looking for a “Ry Cooder Pickup”, something like the one pictured here is what I would be looking for. The pickups have become worth more than the guitars they are on, consequently, as the guitars are bought up and trashed for their pickups, their prices are going to rise.


When this guitar came in the headstock was completely broken off.  Being a 12 string I knew that it would need some extra reinforcement to stay structuraly sound.  I glued the headstock in place and then started to cut away wood from the truss rod to the edge of the neck running from the 5th fret to the A string tuner.  It took hours of cleaning up gluing surfaces and precisely fitting the graft before I could glue it in place.  I then repeated that step on the other side of the neck.  With this repair the only original wood remaing around the break is directly over the truss rods making the finished product basically as strong as a new neck.  Once the neck was refinished you cant even see the original break and only if you look very closely can you see the edges of the grafts.  When the owners of the guitar came to pick it up they thought I had made a whole new neck.  Needless to say they were very excited.  -Evan
The shadows are his home and keeping Gotham's citizens safe is his sustenance. Darkness envelops his every move and his legend lives in the whispers of each passerby. Known by many names — the Caped Crusader, the Dark Knight, Batman — this man lives to protect. But by pitting himself against the criminals of a city, he has only made his laundry list of powerful enemies grow. One after another, a new and nefarious threat has risen up and one after another Batman succeeded in bringing them down. But what happens when those menacing masterminds join forces? Who will rescue Gotham when a deadly roster of depraved lunatics gangs up on the shadowed warrior? Who will save us all? The finale to the legendary Arkham series explodes onto your screen in the most adrenaline-pumping storyline yet. The Scarecrow has returned to Gotham City and he has united a terrifying team of super villains, including Penguin, Two-Face and Harley Quinn. For the first time in the franchise, you get to step behind the wheel of the iconic Batmobile as you harness the power of Batman and scramble to outwit the wicked gang after your blood. Tear through the streets and soar across the skyline in heart-pounding gameplay that will suck you in and force you to ask yourself if you have what it takes to save Gotham. Do you have it within you to be the hero the city needs? Or will the villains of Gotham overtake the Dark Knight once and for all?
Though it gained immense popularity during the rock ‘n’ roll days of the 1950s and 1960s, the electric guitar was invented in 1931. The need for the amplified guitar became apparent during the Big Band Era as orchestras increased in size, particularly when guitars had to compete with large brass sections. The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. By 1932, an electrically amplified guitar was commercially available. Early electric guitar manufacturers include Rickenbacker in 1932, Dobro in 1933, National, Epiphone and Gibson in 1935 and many others by 1936.
×