First off, what makes the sound in an acoustic guitar? On both an acoustic and acoustic-electric guitar, you have the strings that create vibrations when plucked or strummed. That vibration reverberates across the span of the soundboard (top tonewood surface) and also travels down the strings to the saddle and bridge of the guitar. Those vibrations “move” air within the air cavity called the soundhole. The resonance created in the soundhole depends on its depth/size and the tonewoods used to make the back and sides of the guitar. Voila, you now have sound exiting through the soundhole of the guitar.
Ribbon mics exhibit a figure-of-eight pickup pattern. One useful close-mike application for achieving heavy rock sounds involves a ribbon mic (or large-diaphragm condenser set to a figure-of-eight pattern) aimed toward the center of the speaker, with a cardioid dynamic mic angled next to it at roughly 90°, aimed off-center, with the capsules almost touching. Record the mics on separate tracks, and with proper balancing the sound should be powerful and frequency-rich.

Started in 1997 by Steve Suhr and Steve Smith, this Lake Elsinore, California-based guitar-building brand is the finest in a relatively new wave of manufacturers. They do not have a line of guitars, per se. Instead, they make every single guitar to order. This high-end boutique style manufacturing in a large-scale format was all but unheard of until the internet changed the world. Now, this brand can offer dozens of shapes, pickup combinations, finishes, etc. reasonably. But don’t let the fact that their guitar shapes seem like knock-offs of other long-standing brands fool you. Any Suhr guitar you’ll encounter is going to be of the utmost in quality of construction and sound. There simply is not a better custom brand out there with the same vast catalog of offerings. There are literally thousands of possible combinations, so if you are looking for a unique and superb instrument and are willing to pay for it, it’s hard to say there’s anything better.
Whether you’re in the market for an acoustic or an electric guitar will likely impact which brand you may want to purchase from. While lines like Fender and Yamaha offer both acoustic and electric instruments, a guitarist who plays strictly one or the other may prefer to stick to a brand that specializes in that category. A classical guitarist who strictly plays acoustic might gravitate Taylor or Fender for their world class offerings, while a member from a rock band might seek out Epiphone or Gibson’s time tested tone. Most brands will offer instruments in either option, but it's best to know beforehand which ones cater to your needs.
As to the “where,” positioning your mic an inch or less from the grillecloth and aiming it straight at the center of the speaker cone – pointing at the dust cap, in other words – yields a bright, punchy, detailed sound that suits many requirements, but can be too harsh. At the other extreme, aiming the mic at the edge of the cone, where the cone meets the suspension (the area just inside the speaker cutout in the cab’s mounting baffle) usually results in a looser, warmer, more raw and edgy tone. Between these two positions, there’s a wealth of voices to explore, and every inch of real estate that the mic covers between dust cap and cone edge will bring a noticeable sonic shift, without touching the amp’s controls. Also, aiming the mic straight at the speaker, in other words, mounted at 90 degrees to the flat plane of the front of the amp, and aiming it off axis, at a slight angle to the speaker, will illicit different sounds, too. With an assistant helping, or the guitarist playing if that’s not you, try moving the mic around the surface of the speaker while listening for the changes in tone through monitors or headphones, or if you don’t have enough isolation between live amp and monitors, record a little in each of several positions to listen back to. Pick the position you like for the track, and go with it.
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
Predating many of the newer brands on this list is another Californian company – B.C. Rich, who has been producing heavy rock guitars since arriving on the scene in 1969. Since the seventies, B.C. Rich has been a name synonymous with high-quality electric guitars featuring weird and wonderful shapes, including the Warlock, the KKV and the Mockingbird.
Compressors are available as footpedal controls and can be used as an effect on electric guitar signals, for example. They can be used to obtain greater sustain for a string by setting the gain high and allowing the compressor to keep the output signal at a more-or-less constant level until the natural sustain of the string drops the signal below a certain threshold.
Delay pedals take your original signal, a guitar chord or note for example, delays it and plays it back exactly how the pedal hears it the first time. It can either play the note back once or multiple times depending on your settings or “feedback time”. Often, you’ll see Digital Delay pedals as well as Analogue Delay pedals. The major difference is that digital delay pedals will offer longer delays and a ‘cleaner’ exact sound, however guitarists often prefer the analogue sound for all the subtle nuances and slight unpredictability in sound. This comes down to personal preference but both options sound great.
As opposed to the modeling amps and amp profilers already on the market, the Power Head doesn’t just offer a number of pre-set amp settings that would allow you to imitate the styles of famous guitarists (among many other things), but it can also copy the settings of other amps it is connected to, or let you load your own so that any particular style you’ve stumbled upon during a recording session can be re-rendered with crystal-clear accuracy when performing live.

The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
The intervals between the notes of a chromatic scale are listed in a table, in which only the emboldened intervals are discussed in this article's section on fundamental chords; those intervals and other seventh-intervals are discussed in the section on intermediate chords. The unison and octave intervals have perfect consonance. Octave intervals were popularized by the jazz playing of Wes Montgomery. The perfect-fifth interval is highly consonant, which means that the successive playing of the two notes from the perfect fifth sounds harmonious.
Using that pickup and gain level, you should be able to hear some guitar distortion. Of course, if that's not entirely satisfactory, there are a few other things you can do. If your amp has tone controls, you can turn up the mid knob to hear the guitar distortion more clearly. If there's only bass and treble controls available to you, you can turn both of these down a little to hear more distortion.

In one position, lug A and lug B are not connected (that is, the circuit is open). In the other, both lugs are connected (the circuit is closed). To use our seven-sound mod as an example: In one switching position, both lugs are not connected, so the neck pickup connected to the switch is not engaged. In the other position, both lugs are connected and the neck pickup is engaged.

It would not be a lesson on electric guitars and DIs without mentioning Radial’s JDX 48. This DI box, designed to be positioned between an amplifier’s head and speaker, allows for the direct amp sound to travel to the PA and monitors for a more realistic snapshot of the guitar tone. The magic occurs as the JDX 48 is wired to capture both the signal coming from the guitar amplifier head and the back-electromotive impulse from the loudspeaker. The JDX 48 also allows for 100% consistent tone between shows which is impossible with the many variables related to microphones.
In the early 1960s the Brothers Grim became the first American group use Vox Amplifiers. Joe Benaron, CEO of Warwick Electronics Inc. / Thomas Organ Company, the United States distributor of Vox, along with Bernard Stockly (London), importer of Challenge pianos to the United States, arranged for the boys to have full use of the tall Super AC 100 Vox amps (4×12" speakers). The solid-state version of this amp (known in the USA as the "Super Beatle") was produced to cash in on the Beatles-Vox affiliation, but was not nearly as successful as the valve AC30 and AC15 models.
Now, I'm sure that you're all sensibly busying yourselves with making music, so your lives are, frankly, too short to be sifting through more than a half a million words of interviews. Therefore, I'm going to try to digest what I've discovered during this process for the benefit of those less sad than me! I'm not about to dictate which technique is 'best', though, because if reading this many interviews has taught me anything it is that people will always disagree on what constitutes a great sound. Instead I've recorded a number of different audio examples to allow you to judge for yourselves, just as I did, which techniques are likely to make a real difference to your own productions. I've peppered this article with a number of boxes giving details of these files.

Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
There are lot of great amp out there, but there are overpriced. Peavey prove they can do almost as great as other for a really more decent price. Moreover, they have great features and technical improvement that the "classic" manufactureres avoid to be focus on vintage sound and their reputation... The bandit 112 is a bargain. The valveking series was great budget valve amp for metal. Classic 30 and 6505 are interesting too. Vypr series was also great but it seems their recent series have issues... Anyway they build great amp and doesn't scam people as others do... check it out!

Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.

* The Chinese examples of the sunburst model that I have seen have a slightly golden-orange tone to the sunburst pattern, more like the traditional sunburst color in American guitars. The Indonesian examples I have seen have a much more over all orange look. Basswood does not have a lot of visible grain. The example guitar shown in the official Epiphone product photos, the photos you see on most web sites like Amazon and Musician's Friend and so forth, are probably a little optimistic when it comes to visible grain and the golden hued quality of the sunburst finish.
Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”
I was a little concerned buying a guitar on Amazon. I had not even played a sample on the Gretsch acoustic. I've played Martins, Fenders, Washburns, etc. but never heard of the 'Gretsch'! It arrived within a few days of ordering with the case I ordered too. I had it delivered to my office so that it wouldn't be sitting on my porch until I got home. I opened the box to examine the guitar and co-workers asked me to play something. As I was tuning the white Gretsch I broke a string, so playing it for my friends was not going to happen. When I got home I re-stung the guitar and as I was tuning it I was not very impressed. I like the look but come on we purchase a guitar to play! After it was tuned I began to play a few chords and licks.
Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.
by lexxus gomes The amp that you use can fundamentally change the sound of your guitar. For example, many "hard rock" musicians like the "chug chug" of a Marshall stack, while blues guitarists may like a Blues Deville. I kind of like the "clean" sound of a Fender Twin Reverb, myself, although I usually just record without an amp into my mixer, and use a guitar effects processor to simulate an amp sound.
The noise he complains about is likely ground loop hum, caused by multiple paths to ground, very common in pedalboards and I explained earlier. I do believe it’s better to get rid of noise rather than use a noise suppressor. Get rid of the noise, and you have a quieter signal path. I do use noise supressors but only to deal with noisy pedals while they are on, such as a compressor/distortion I love that can be a little noisy.
Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.
Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.
Some of the most impressive pieces of equipment come in small packages and in the shape of an item you would not expect to be as good as it is. The proof of this is the deceptively simple looking Mugig Portable Amplifier for Electric guitar, with 10W of power. This piece of equipment is on the big side of small, but is perfect in every single aspect of it, other than the size. The design is simple and understanded, the ease of transport is guaranteed, while the sound takes over the mind and heart of the musician and the crowd instantly. It is possibly the best electric guitar amp that I have gotten to mention on this list.
We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.
The reason why you would want to have one of these on your pedalboard is simple. An EQ pedal allows you to adjust a variety of frequency bands and shape your tone based on your own requirements. As you evolve your skill and knowledge, you will soon realize that you can’t play without a pedal of this type. When it comes to some notable models, Empress ParaEQ comes to mind as the best choice.
You have to have wood to get wood, and it’s unfortunate that a noticeable depletion on this natural resource is affecting the guitar industry even though guitar-making isn’t the primary reason for this depletion. When you talk about tonewoods, you have to mention sustainability in order to protect the natural resource and ensure a future of musical instruments.

Ibanez are a Japanese musical instrument company. Although Yamaha is a better known Japanese musical instrument company, Ibanez exceeds expectations for electric guitars. This brand of guitars stands out in the world of rock guitars. They gained popularity in the 1980s when they introduced their original designs for guitars based on Steve Vai’s JEM Universal. Their designs have since become some of the biggest selling metal guitars. The Ibanez guitars are used by guitarists such as Steve Vai, Paul Gilbert, and Joe Satriani. In addition, Ibanez guitars tend to be very affordable, giving you a great guitar for a cheaper price.
Our Most Recommended electric guitar is Yamaha Pacifica Series PAC012 Electric Guitar. Yamaha has been a power player in the music industry for many decades. The Pacific Yamaha Series is one of the best series for the last decade for its high quality tone and amazing play experience. The Yamaha Pacifica Series was designed for the focus of one thing: Yamaha’s customers.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
{ "name": "Cherry", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000001000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000001000", "displaySku": "J40301 000001000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Cherry", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
However, Class D amplifiers (also called "switching amplifiers" or confusingly, "digital amplifiers") are more efficient than conventional Class-AB amplifiers, and so are lighter in weight and smaller. The Acoustic Image Focus head, for example, produces 800 watts of power and weighs 2.2 kilograms (about 4 pounds). Class-D amplifiers use MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) rather than 'ordinary' (bipolar) transistors, and generate a pulse-width modulated signal that is filtered before it reaches the speaker.[15] In the 2010s, the availability of Class D amplifiers has enabled amp manufacturers to produce very lightweight and small, yet very powerful amp heads and small, lightweight combo amps.

The Neal Schon Signature Les Paul model has a carved mahogany top, mahogany back, multi-ply black/white binding on top, chrome-plated hardware and a Floyd Rose tremolo. The one-piece mahogany neck has a scarfed heel joint a “Schon custom” slim-taper neck profile. The 22-fret ebony fingerboard features pearl split-diamond inlays and single-ply white binding. The pickups are a DiMarzio Fast Track/Fernandes Sustainer in the neck position and a Gibson BurstBucker Pro in the bridge position. In addition to the standard Les Paul electronics (individual pickup volume and tone controls, plus three-way selector switch), the Schon Signature features two mini-toggles – an on/off for the Sustainer and an octave effect – along with a push/pull pot for midrange cut. Only 60 of the guitars were made, and sold it out in days upon release.
Lyle guitars were some of the best COPY CAT guitars made during the LAWSUIT years - years where Lyle (made in Japan) attempted to COPY higher end American made Gibson and Fender guitars - hence 'lawsuit' guitars. There are some other companies that attempted to 'copy' American instruments but many of those were made in Korea or other countries and were not of the quality that the Japanese 'Lyle' copies of American instruments. They would have done well to make their own branded guitars - they're very well made. Another 'copy' company from that era is Ibanez - they made excellent instruments, too, and they paid quality guitarists to help them market their marque - George Benson, for example. Enjoy your guitar.
This guitar follows traditional Martin specs with a 25.4" scale length and a 1.75" nut width, and they also gave the neck and ebony fretboard a worn-in feel that makes the guitar play extremely well right out of the case that it comes with. On top of its true to form vintage sound, playability and looks, the OM-28 E Retro is equipped with the extremely versatile Fishman F1 Aura Plus, which offers three acoustic voicings modeled from actual Martin Museum guitars. If you play various musical styles and you're looking for a be-all and end-all acoustic guitar, you will be blown away by the OM-28 E Retro.
Usually, electric guitars have six metallic strings – although there are certain variants used in specific musical styles with seven or even a dozen strings (six pairs). This kind of guitar is used in all kinds of musical styles, from jazz, to metal, pop... and of course Rock'n'Roll music. Actually, the origins of the electric guitar can be traced back to the 1930s Swing-era Jazz movement, when guitarists started experimenting with steel pickups adapted to their hollow-bodied instruments, as a way to get a louder, more substantial sound than what would be possible from a regular guitar. The first commercial electric guitars came up in the mid 1940s, and by then a solid-body was already in use – thus introducing the much familiar look that's now typically associated with electric guitars.
Here, in this mini guide to acoustic guitar body types, we’ll aim to show you some of the key differences in size, shape, sound and suitability between the major variations of guitar. We’ll look at the history of some of the better known body types, and make recommendations according to the sound you’re going for and the style in which you play. So whether you’re a wispy finger-picker or a hearty strummer, we’ll explain some of the more intricate details of acoustic guitar body shapes.
When B.B. King heard T-Bone Walker, he "thought Jesus Himself had returned to Earth playing electric guitar." Walker invented the guitar solo as we know it, building a new style on fluid phrasing, bluesy bends and vibrato. It was the clear tone and melodic invention of his 1942 single "Mean Old World" that blew everyone's mind, and Walker refined his approach through hits like "Call It Stormy Monday." "I came into this world a little too soon," Walker said. "I'd say that I was about 30 years before my time."
The Yamaha APXT2 is a 3/4 size version of the world's best-selling acoustic-electric guitar, the APX500III. This well-constructed, compact guitar makes a great companion when you're on the road. The APXT2 features an ART-based pickup system and Yamaha's proprietary tuner, offering great sensitivity and accuracy for quick tuning. The APX T2 also includes a gig bag.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
If the wood is the foundation of the structure, of course it will contribute to how the guitar sounds. Most people who argue that wood doesn’t affect the tone say that the string cant be affected by the wood because it is suspended between the metal parts of the guitar. If this were entirely true, you wouldn’t feel vibration in the guitar body. If the body of the guitar is vibrating, then it is going to affect the vibration of the string. The foundation of a structure will affect how it reacts to vibration.
A variety of labels are used for level attenuation potentiometers (knobs) in a guitar amplifier and other guitar equipment. Electric guitars and basses have a volume control on the instrument that attenuates the signal from selected pickups. There may be two volume controls on an electric guitar or bass, wired in parallel to mix the signal levels from the neck and bridge pickups. Rolling back the guitar's volume control also changes the pickup's equalization or frequency response, which can provide pre-distortion equalization.
The ultimate rock/metal electric guitar instrument is here! Shreddage II covers the entire range of lead AND rhythm playing – every fret, every string, and tons of articulations. A powerful interface allows for easy playing and deep customization. With the included Kontakt Player and ReValver HPse, you’ll have everything you need to SHRED. Now includes Shreddage 2X update!
The Epiphone Les Paul SL guitar (seen here in a Vintage Sunburst finish) is a great option for beginner guitarists out there as well as those in need of a high quality, budget friendly guitar that actually sounds and feels great. This is one of our best cheap electric guitars thanks to the fact you get a Les Paul style guitar packed with ceramic single coil pickups capable of spanning a range of different genres for under £100.
We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!
• How wear alters playability: Fret wear – grooves worn in the frets from pressing down on the strings, depressions created by bending, lowered overall fret height from usage – can all cause buzzing noises to occur at points where frets are located along the neck. Luckily, these problems can typically be addressed by having the frets leveled and dressed several times before a fret replacement job is necessary, since fret replacements are costly.
Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.
Although electric guitar sounds vary dramatically, they are all essentially midrange instruments with little or no extreme high- and low-end information. With the tone controls on the amp and the guitar itself, recorded electric guitar sounds often need little in the way of EQ if the desired tone was produced at the recording stage. However, if the sound needs a bit more bite, try boosting the upper mids somewhere between 2.5 and 5kHz. For added warmth, a little boost around the 250Hz range should thicken the sound, while muddiness is often dealt with by cutting a few dBs at around the 200Hz mark.
Over the years, authentic 1950s Les Pauls have become some of the most desirable and expensive electric guitars in the world. Only 1700 were made between 1958 and 1960[citation needed]. Today, a 1959 Les Paul Standard in good condition can be easily priced between $US200,000 and $US750,000, making it the most valuable production model electric guitar ever built (however, Gibson Custom Shop reissue versions of the 1950s and 1960 Les Paul can be purchased for less, between $US3,000-$US6,000 – certain artist signature model versions of the guitars are considerably more expensive). Jimmy Page has been offered 1 million pounds (1.6 million USD) for his “number 1” 1959 Les Paul should he ever decide to sell it.[22]
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
UPDATE 10/21: The good news first - I'm still absolutely loving the game and steadily improving. I'm only able to play about one to two hours a day, but even though that's all the time I'm able to put in, I'm already to the point of being able to play along with a song. But (here comes the downside), with my improvement audio lag has become a real issue. Before I was so horrible that I couldn't hit the right notes at all, let alone on time, so it didn't make much difference. But now that I've improved, it's a problem. To be fair, they warn you about this in the form of a pamphlet inside the game box, so it wasn't out of nowhere. I was just hoping that since I wasn't using HDMI, the lag wouldn't be too horrible. Wrong.
During the Advanced Electronics class students will build a simple low impedance booster by hand, from paper to breadboard, to a point-to-point wired circuit board.  The Booster can be put into a guitar or other type of enclosure.  In addition, Scott will familiarize students with his ‘harness wiring’ tool, that is available online by visiting Guitar Modder.
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
Native Instruments Guitar Rig VST plugin offers a free collection of various rack stacks that lets us try out typical effects setups of recent years. It can run in a DAW host or as a standalone. Do a Web search for "best amp synth" and you'll find more about what's happening with amp emulators -- along with maybe a link back to the excellent recommendations found in this thread.

One of the newer brands on this list, Jackson Guitars was established in Glendora, California in 1980. However they’ve made a huge impact to the world of metal, and their guitars are used by some of the biggest names – Randy Rhoads, Adrian Smith, and David Ellefson to name a few. Some of their most famous models include the Soloist, and the Rhoads.

In a very basic sense, your pickups create a magnetic field that is disturbed when guitar strings are vibrated above it. This, in turn, converts the vibration of the guitar strings into a current. The current is then sent through to your output jack where the signal then passes through your lead into your amplifier, where it is amplified. Different gauge strings vibrate at different rates e.g. an A string will typically vibrate at 440 cycles per second (440 hertz) which creates a current of 440 hertz in the pickup.

As someone else mentioned, it depends if this will just be a practice amp, or if it will be used to jam with others. Personally, I think a beginner should just get a small practice amp, but a good one. The reason is that you don't yet know what you will want tone-wise out of a gigging/jamming amp yet. So just get the best solid state modeling amp you can afford and worry about a bigger amp later.
The first effect in our signal chain is a pedal wah. A wah is an effect known as a filter that alters the basic tone of the guitar. When you push the pedal fully forward, the filter brightens up your guitar tone and you bring back the pedal your guitar tone gets darker. For the most variety of sound, you want all the other effects to have a shot at the sound from the Wah so the ME-80 places it as close to the guitar as possible.
Ok, funny enough last week i got my old squire Tele out the loft to perform a maintenance on it and i adjusted the Truss rod, action, innotation. I've installed some nee pick ups too. But it still doesn't mean that there aren't easier guitars out there to play. There are differen't necks, frets, body shapes etc that all factor in. Someone has already said that a Tele is one of the hardest to play so i still think my question is valid
Epiphone began in Manhattan in 1903 when Anastasios Stathopoulo set up shop (not as Epiphone). When Anastasios died of cancer in 1915 his son Epaminondas (Epi) took over the business. Epiphone and Gibson had an on-going rivalry first in banjos and then in archtop guitars. Gibson finally acquired Epiphone in 1957. Although Epiphone guitars continued to be made in America for a time after the acquisition (often in the same factory, side-by-side with similar Gibson models), Epiphone is now a Gibson brand for overseas, imported lower cost guitars, though many are based on Gibson designs.

With the advent of hard-rock acts like the Kinks and Yardbirds in the 1960s, the thirst for crunchy, distorted sounds grew insatiable. Kinks guitarist Dave Davies even slit his speaker cones in a quest for extra-gritty sound. The demand for loud, distorted output led to the rise of England’s Marshall amps, which were enthusiastically adopted by rockers on both sides of the Atlantic.

Your guitar is equipped with a volume knob – but that doesn’t mean you won’t benefit from a volume pedal. Very useful for various applications, the volume pedal can act – as you imagine – as a pure volume for your guitar signal (placed right before the amp) and also as a master volume if placed after your amp. By using a stereo volume pedal you can further expand the tonal possibilities of your setup. Ernie Ball makes a variety of volume pedals with different specifications (in order to match your guitar, amplifier or musical needs). Mooer offers a very compact and stylish pedal, the Expline – while Boss still sells to this day the FV-500-H, a pedal that passed the test of time and still performs amazingly well.
Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as bass guitar, electric piano, and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort. While overdriven tube amps are still used to obtain overdrive in the 2010s, especially in genres like blues and rockabilly, a number of other ways to produce distortion have been developed since the 1960s, such as distortion effect pedals. The growling tone of distorted electric guitar is a key part of many genres, including blues and many rock music genres, notably hard rock, punk rock, hardcore punk, acid rock, and heavy metal music.
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Bronze, Black

Great Condition, "335-style" hollow body / Thin-Line, Japanese Electric Guitar by Diasonic. 2-single coil Pick-ups. Great black to red see through Sunburst finish. Bound, Rosewood fingerboard  w/ dot inlays and solid mahogany neck. Four bolt neck joint, double bound body and laminated top, back and sides for excellent long-term durability and great feedback control. "Trapeze" tailpiece w/ rosewood bridge, featuring adjustable string spacing. Separate on/off's for each pickup, Volume and Tone and adjustable truss rod. Very shiny. Finish and wood in great shape. Virtually no wear to finish. All chrome perfect and rust-free. Original pick guard perfect and intact.  Pickup bezels have minor issues, see above photos for details. Plays and sounds great. Whammy bar included! Frets in great shape with minor, virtually no wear. Nice flat frets for speedier action. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .010 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!),  and cleaning and polishing. Plays and sounds great. We also installed a new set of .010 "Round-wound" strings.
This article was extremely helpful for me to understand the 5 way (ok, 3 way) switch. I’ve only previously wired a guitar with one double humbucker, and now I’m going to replace the bridge and neck pickups in an Ibanez that has HSH. The 8 contacts were confusing me since my last wiring job didn’t even involve a switch, but after reading this I know exactly what to do.
Whereas tube amps are the traditional, solid-state amplifiers represent the modern guitar amplifier (even though they have been around for decades). While some guitarists refuse to consider solid-state amps worthy of their time, models such as the Roland JC-120 Jazz Chorus are proof that solid-state amplification is not only capable, but preferable in some cases. This high-end amp offers 120 watts of power, professional-grade tone and awesome versatility. It’s a good reflection of this segment, which offers endless versatility with affordable prices, low maintenance and incredible reliability.
Generally, a band sounds the best to the audience when you have an attentive, knowledgeable sound person who is paid well by the band or venue. He also needs the right tools to balance the sound for the room. If all of the instruments onstage are blasting at full volume, the poor PA can’t keep up- and the people in the first few rows have their heads torn off by whatever instrument amplifier they are unlucky enough to be standing in front of. This results in an unbalanced mix that the sound person can’t fix. It might sound awesome onstage, but you want the audience to have a great experience too, right? With monitors, side fills, several amps/cabs, and a fort full of cymbals onstage, things get loud quickly, and everything competes for the same sonic space. It is easy for band members to get into ‘volume wars’ while the sound dude/dudette takes everyone out of the mix but the vocals right before they throw up their hands and shake their heads. The audience might not know what sonic problems are occurring, but they definitely will hear it. An audience member describing a gig like this to a friend might say, “I saw this band, but they sounded terrible.” No one wants that kind of review. We spend a lot of money on guitars, pedals, amps, and microphones. But many  musicians at the gig just set everything up and hope for the best. 
Sounds cool! You’re right that flats are a key to the ’50s Nashville sound. But a lot of guitarists forget that almost EVERYONE used flats until the latter part of the ’60s. Early Beatles, Stones, Who, Kinks, Motown and other R&B, surf, and of course anything jazz-related — it’s all flatwound guitar work till ’66, ’67 or so. Also, the main reason we migrated away from nickel is because the material became markedly more expensive at the end of the decade. (Though yes, some did prefer the brighter tones of replacement materials.)

Search through such iconic pieces of gear as pre-war Martin acoustics, ’50s-era Gibson electrics and ’60s Fender® Super Reverb amps—or perhaps you've always wanted to play an amplifier that your favorite British Invasion or psychedelic garage band used, in which case, you'll have the pleasure of browsing countless vintage amplifiers from Vox, Danelectro, Silvertone and more. Our Vintage Collection also consists of a wide range of MIDI and pro audio equipment, with everything from dynamic and condenser microphones to signal processors and stunning keyboards made by Moog, Univox and Hohner.

A bass amplifier or "bass amp" is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. While bass amps share many features with the guitar amplifiers used for electric guitar, such as providing an amplifier with tone and volume controls and a carrying handle, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15" speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
Double-neck (or, less commonly, "twin-neck") guitars enable guitarists to play both guitar and bass guitar or, more commonly, both a six-string and a twelve-string. In the mid-1960s, one of the first players to use this type of guitar was Paul Revere & the Raiders' guitarist Drake Levin. Another early user was John McLaughlin. The double-neck guitar was popularized by Jimmy Page, who used a custom-made, cherry-finished Gibson EDS-1275 to perform "Stairway to Heaven", "The Song Remains the Same" and "The Rain Song", although for the recording of "Stairway to Heaven" he used a Fender Telecaster and a Fender XII electric twelve-string. Mike Rutherford of Genesis and Mike + the Mechanics is also famous for his use of a double-neck guitar during live shows. Don Felder of the Eagles used the Gibson EDS-1275 during the Hotel California tour. Muse guitarist and vocalist Matthew Bellamy uses a silver Manson double-neck on his band's Resistance Tour. Rush guitarist Alex Lifeson is also known for using double-neck guitars in the live performance of several songs. In performances of the song "Xanadu" during the band's 2015 R40 anniversary tour, Lifeson played a white Gibson EDS-1275 double-neck guitar with six-string and twelve-string necks, while bassist Geddy Lee performed with a double-neck Rickenbacker guitar with four-string bass and twelve-string guitar necks.
Noise gate: Noise gates attenuate hum, hiss, and static in the signal by greatly diminishing the volume when the signal falls below a set threshold. Noise gates are often used by electric guitarist who play with vintage amps, which can have unwanted hum in the tone, and by guitarists from heavy metal who use high distortion levels, which add noise to the signal even when no notes are being played. Noise gates mute the signal when it falls below a certain threshold. This means that during bars of rest for the guitarist in a song, the hum or noise from the amp or distortion pedal will not be heard by the audience. Noise gates are expanders—meaning that, unlike compressors, they increase the dynamic range of an audio signal to make quiet sounds even quieter.[60] If used with extreme settings and combined with reverb, they can create unusual sounds, such as the gated drum effect used in 1980s pop songs, a style popularized by the Phil Collins song In the Air Tonight.[62][63]
A. If you're a beginner or you're buying for a beginner, you'll probably want to start with a fairly basic guitar, just in case you don't like playing. You can also find sets or starter packs that come complete with a small practice amp, a lead, a strap, and other useful items for new guitarists. These usually work out cheaper than buying the items separately, but not significantly cheaper, so don't worry if you have your heart set on a guitar that doesn't come as a starter pack.

In contrast, wiring two pickups in series produces a longer path with increased resistance, adding volume while preventing the highest frequencies from getting through. With series wiring, the output of one pickup goes into the input of another pickup, while with standard parallel wiring, each pickup takes its own path to the output. Besides being noticeably louder, series wiring emphasizes low and midrange tones, and this is a perfect combination to drive any tube amp into saturation without the help of a booster.
You’d be hard-pressed to find a more distinctive guitar tandem in modern metal than Zacky Vengeance (Zachary Baker) and Synyster Gates (Brian Haner, Jr.). From their sound, to their look, even to their names, the duo routinely go down guitar paths other metal axmen don’t dare travel, spicing up Avenged Sevenfold’s otherwise dark and aggressive attack with, among other things, hooky, major-key melodies, laid-back acoustic picking, buoyant, carnival-esque rhythms and a whole lot of style.
Unfortunately there are a few who are not too happy with with some of the default patches, they caution that the PODHD500X is not a plug-and-play unit. While you can get good tones with a bit of tweaking, you can get even better tones with more experience, so the learning curve can be a bit steep for some. For best results, you ought to research the actual gear that your favorite musicians use, along with their settings and use them as your starting points to creating your own tones. Thankfully, there are user made presets that you can also use as base for your own virtual signal chain.
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
: I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
The HeadRush Pedalboard's quad-core processor-powered DSP platform enables a faster and more guitarist-friendly user interface, reverb/delay tail spill-over between presets, the ability to load custom/third-party impulse responses, a looper with 20 minutes of record time, and more. The unit's most notable feature, however, is the seven-inch touchscreen, used to edit patches and to create new ones. In form, the Pedalboard most closely resembles Line 6’s Helix in that it has a treadle and 12 footswitches with LED ‘scribble strips’ showing each switch’s function and a colour-coded LED for each. There are several modes available for calling up sounds, easily changed by a couple of footswitch presses. In Stomp mode, the two footswitches to the left scroll through and select Rigs, while the central eight footswitches call up stompboxes within a selected Rig. Then in Rig mode, the left switches scroll through the Rig banks, while the eight select rigs. Sound-wise, there's no 'fizz' here, even on higher-gain patches, and the closer you get to a clean amp sound, the more convincing it is. If amps matter to you more than effects, the HeadRush is well worth looking into.
Note that the information presented in this article is for reference purposes only. Amplified Parts makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.

Tremolo: A tremolo effect produces a slight, rapid variation in the volume of a note or chord. The "tremolo effect" should not be confused with the misleadingly-named "tremolo bar", a device on a guitar bridge that creates a vibrato or "pitch-bending" effect. In transistorized effects, a tremolo is produced by mixing an instrument's audio signal with a sub-audible carrier wave in such a way that generates amplitude variations in the sound wave.[80][81] Tremolo effects are built-in effects in some vintage guitar amplifiers. The guitar intro in the Rolling Stones' "Gimme Shelter" features a tremolo effect.[82]

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"distortion & overdrive effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}

There is also a niche market for modifying or "modding" effects.[citation needed] Typically,[according to whom?] vendors provide either custom modification services or sell new effects pedals they have already modified.[citation needed] The Ibanez Tube Screamer, Boss DS-1, Pro Co RAT and DigiTech Whammy are some of the most often-modified effects.[101][102] Common modifications include value changes in capacitors or resistors, adding true-bypass so that the effect's circuitry is no longer in the signal path, substituting higher-quality components, replacing the unit's original operational amplifiers (op-amps), or adding functions to the device, such as allowing additional control of some factor or adding another output jack.[101][103][104]
Not to say that other sounds don’t have their place: the total freakout—sometimes very, very cool in itself—of a second-rate tube amp pushed way past its normal operational capablities; the smooth, pliable, ultra-saturated sound of a cascading gain preamp; the cheesy, buzzy fizz of a cheap tranny amp slammed with too much gain and clipping to beat the band… Any of these can yield the godlike tone of the day in the right application, with the right player. But think Page, Hendrix, SRV, Blackmore, Eric Johnson, Clapton, Van Halen, Gary Moore, and it’s cranked vintage amps and touch that are producing the tone. They were often aided by some type of distortion pedal, sure, because that was the only way to switch textures between verses, choruses and solos, or to push the big amps into distortion at less than full volume. But who wouldn’t choose to get their rock overdrive sound from a 50W 1968 Marshall Plexi on ten, or their blues lead sound from a tweed Bassman on 12, if the ears and the noise police would stand for it? For most players in the broad spectrum of rock, even those usually chained to the back of the stage hacking away at a clean rhythm part, these yield the sweetest, most tactile, touch-sensitive and playable tones available. Get that amp cooking to where the riffs get juicy and fluid and effortless, sustain and harmonic feedback hover into view at the tap of a fret, and the preamp and power amp tubes’ race to keep up with the pick attack lends a comforting softness and compression to the feel (a sensation further enhanced by the natural sag of tube rectification, where present). Mmmm. You can almost feel it now. If we could only get that play-it-all-day vibe at tolerable volume levels, any time we liked.
If you are not attracted to the way the guitar looks or feels in your hand, chances are you won't be too eager to pick it up every day. When you are just starting out, this is supremely important. Here's where a disclaimer needs to be placed. This isn't always the case, and often times people warm up to a guitar even if they didn't initially like it, but why chance it?
Most bass amps have only one rated wattage. A small number of amps, such as the Mesa/Boogie Strategy 88 amp head, have switchable wattage. A selector switch on the 88 enables the bassist to choose its full 465 watt power; half power (250 watts); or low power (125 watts). A bassist playing an arena on one night, then a club gig, and then recording in a studio could use full, half and low power for the different volume requirements. The Quilter 800 Bass Block has a "master control" knob which switches between various watt outputs for a similar approach.
CALIFORNIA SPECIAL models mix no-compromise attitude with top-notch build quality and sound. Optimized bracing reduces mass for superior resonance, while the upgraded bone nut and saddle grant them exceptional sustain. Featuring all-solid construction, the fully-painted solid Sitka spruce top and matching 6-in-line headstock give the models a shot of electrifying attitude and unconventional Fender style that loves to be both seen and heard.
The ‘boomer’ kids wanted their own voice and opinions to be heard, they wanted to be taken seriously – and like the quote from the 1966 film ‘The Wild Angels’ which exaggerated this rebellious angst to the extreme “…We wanna to be free to do what we wanna do…”  There was a sense of needing to rebel against ‘The Man’ – basically anyone who told them what to do or how to conform to society respectfully.
The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
For instance, during 1970s and early 1980s, Japanese manufacturer Tokai Gakki produced superb replicas of 1957–59 vintage Les Pauls, and replicas themselves were gradually highly regarded. In the 1980s, to respond to the high demand for vintage models, Gibson itself began to offer a line of “Custom Shop models”, almost accurate reproductions of early Les Paul crafted by the Gibson Guitar Custom Shops.

While most effects pedals can drastically alter your sound, there are some that add more subtle elements to your signal to create a more pleasing sound. They may not be as exciting or fun to play with, but they can be the difference between pretty good and truly great sounds. As your collection of effects grows and opportunities to play with bands increase, some of these will become important additions to your rig.
The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.

The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!
Mic placement is pretty crucial. You can get a million different EQ responses depending on where you throw the mic in front of the cab. I personally have the best luck - or at least I think so - when I back the mic off a little bit. I know a lot of engineers throw it right on the grille to get the bass boost, the proximity effect and all that garbage, but I find that if I back it up about six inches, I get a more balanced EQ curve.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
Launch price: $599 / £500 | Body: Basswood | Neck: Hard maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Manson Design bridge humbucker, Manson Design neck single coil | Controls: Volume, tone, 3-way selector switch | Hardware: Two-piece bridge and tailpiece, staggered height locking machineheads | Left-handed: Yes: MBC-1LH | Finish: Matt Black
The SSL-10 had become the SSX-10 ($387), with humbucker/single/single pickups, pretty much the same. This came with jumbo frets, a satin-finished neck and a 14 degree backward pitch on the head. The rosewood ‘board now sported the “wave” or triangular wave inlays popular on Kramers, Charvels and Jacksons of the period. No mention is made of vibrato, but that doesn’t mean it didn’t have a tradition-style unit. Colors were now Carrera midnight blue, metallic black, purple burst, dark red, white pearl and blue pearl, all with chrome hardware.

The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.
Mahogany is a very dense, strong wood used in all parts of guitar manufacture except fretboards and bridges, which require harder wood. A mahogany neck and back are often found on short-scale guitars with maple tops. Another common combination is an all-mahogany body and neck (excluding the fretboard). Because mahogany is not very hard, it emphasizes the midrange and bass frequencies for a mellower guitar tone. Mahogany is a very resonant wood which enhances a guitar's sustain. It is generally a uniform rich brown color.
Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.

Les Paul created an early solid-body electric guitar in his spare time after work at the Epiphone factory in the early 1940's famously known as "The Log". It is believed that this was the first solidbody 'Spanish guitar' every built. He went on to develop the idea further until he took it to managers at Gibson sometime in 1945 or 1946 who immediately...
An excerpt: “Quite a few of the artists I’ve worked with have told me that my own personal style might be described as flashy. In this book, we will definitely cover the hotter aspects of playing, not only regarding lead styles, but rhythm techniques, too. What I’ve found after years of experience in the studio and onstage with many different types of artists is that a guitarist can modify his playing and adapt it to the requirements of the particular situation while still revealing his own distinctive musical personality.”
Established over a century ago as a piano and reed organ builder, Yamaha has since expanded into building other musical equipment and even went on to successfully expand into other industries. But in all this success, Yamaha continues to stay true to their musical roots, producing highly rated instruments, amps and other gear. While they are not primarily a guitar amplifier builder, Yamaha's extensive reach and resources give them an almost unfair advantage over the competition, as exemplified by the success of their THR line of desktop guitar amplifiers. This line of portable amps combines Yamaha's penchant for student friendly features and modern studio functions that many guitarists appreciate, ultimately securing Yamaha a special spot on this list.
So you’re thinking about building an electric guitar. Well, it’s a very rewarding experience when it’s done right, and you have the ultimate freedom to make it whatever you want. On top of that, it can be a money saving alternative to the hefty price of a good instrument, if you’re willing to invest your time. Or if you’re just planning on undertaking a fun project, it can certainly fit that bill too.
"This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, comfortable 9 1/2″ radius and Jescar 57110 medium-jumbo nickel-silver frets for silky playability. The moment you open the luxurious hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing."
The S670 QM is a speedster's guitar, with locking tuners and a razor thin "Wizard III" Maple neck, developed by Ibanez to be specifically fast and easy to play. Players with smaller hands or those who like to use their thumb to grab notes on the sixth string will find the neck particularly accommodating. So this model (and many of the Ibanez designs) score high marks for playability.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}