Even if your favourite musician is predominantly driven by music and is committed to releasing material for their fans, they cannot possibly deny that are a number of incentives for them to do so. A journalist writing for The Economist online explains that songs are ‘complex mixtures of features’, so composers are always trying to find the right mix of ingredients to increase their chances of success. And everyone loves a success story!
An effects pedal signal chain is simply the order in which a series of pedals are connected. If you have ever seen a player use a pedal board, the order of his pedals make up his signal chain. And if by some chance you thought that you can simply place these pedals in any sort of order and still get the same results – think again! Even if you’re just working with two pedals, you will get a different sound depending on the order.
Editorial comment – I advise folks when considering fretwork to consider not choosing a size or leveling operation resulting in less than .040” height if they want to play a style with frequent fret hand slurring, i.e. rock, blues, shred etc.  Low fret height is less capable of sustaining a reasonable fret leveling in the future, making it that much closer to refret time.  You don’t have to choose a very tall size if that is uncomfortable for you, but only choose a low height if that is really what you want and are accustomed to.
Flexibility of the BOSS Katana-50 goes way beyond expectations for establishing a different path referencing to its predecessor the Roland type of practice amps. With 50 watts of power and a custom 12-inch speaker, the Katana-50 can deliver a commanding range of sound playing it clean, crunch, lead, and brown for electric and acoustic electric guitars. Moving on to other controls on the panel, it features customizable effects by using BOSS Tone Studio editor software and for adjusting sounds quickly, it has a dedicated gain, EQ, and effects controls. Tone setting memory is also included for storing and recalling all amp and effect settings.

To THIS DAY, In My Life of being a Guitar-Player, I am Constantly STUNNED By The fact that SO many people-playing-guitar, know 'Diddly-Squat' about STRINGS.---When I Meet a New SOUL, Who Claims They are a Guitar-Player, Then When Asked 'What-Kind-of-Strings' do you Use,----I Get This 'Blank-Stare', which tells me Straight away They Don't even Know What-Size Shoe they Ware.----Very Strange.
I play a Tele, but I can’t say I’m in love with it. I have this feeling that a Gibson would sound and play differently – perhaps warmer and more mellow – but I have no factual basis for thinking that. It is based more on who I have seen playing different models, and what style of music they are playing. This is what I think most of the differences guitarists imagine come down to – a lot of preconceived notions, reinforced by vague generalizations (like the ones in this article) and marketing hype. But I readily admit I could be wrong about that.
Though it gained immense popularity during the rock ‘n’ roll days of the 1950s and 1960s, the electric guitar was invented in 1931. The need for the amplified guitar became apparent during the Big Band Era as orchestras increased in size, particularly when guitars had to compete with large brass sections. The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. By 1932, an electrically amplified guitar was commercially available. Early electric guitar manufacturers include Rickenbacker in 1932, Dobro in 1933, National, Epiphone and Gibson in 1935 and many others by 1936.
Browse guitar sheet music for all levels of guitar players. Whether you're a beginner starting from a clean slate or a guitar shredder gigging on a nightly basis, our guitar sheet music collection has everything you need. Find thousands of guitar method and guitar etude books as well as your favorite guitar songbooks from Jimi Hendrix, Stevie Ray Vaughan, Metallica, The Beatles and more. Looking for digital guitar music, guitar chord books, guitar play alongs and guitar transcriptions? No problem. Take a load off, put up your feet and browse and buy guitar sheet music today.
Very cheap acoustics are usually not such a great idea. Often their sound quality is poor and they are hard to play. I often see students selling them after a six-month struggle (if they managed to stick with it that long!). So if your budget is very tight, I would not get an acoustic. You may think you save a little money because you don't need to buy an amplifier as well, but as I said before you don't have to use an amplifier to practice anyway.
i bought one in 1966, my first guitar, i paid 38.99 for it at a gibson dept. store in ft. worth, tx. it was mij under the same name and was marketed in canada as regent guitars and in the u.s. later as kent guitars. it is in the same catagory (some say better) as teisco its competator, some say there was some interfacing between the 2 companies. i really enjoyed it and wish i still had it, it played great and sounded great. i found this while surfing 4 another!!!
Started in 1997 by Steve Suhr and Steve Smith, this Lake Elsinore, California-based guitar-building brand is the finest in a relatively new wave of manufacturers. They do not have a line of guitars, per se. Instead, they make every single guitar to order. This high-end boutique style manufacturing in a large-scale format was all but unheard of until the internet changed the world. Now, this brand can offer dozens of shapes, pickup combinations, finishes, etc. reasonably. But don’t let the fact that their guitar shapes seem like knock-offs of other long-standing brands fool you. Any Suhr guitar you’ll encounter is going to be of the utmost in quality of construction and sound. There simply is not a better custom brand out there with the same vast catalog of offerings. There are literally thousands of possible combinations, so if you are looking for a unique and superb instrument and are willing to pay for it, it’s hard to say there’s anything better.
The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").
Growing up in the late '80s as a young teenage musician, my friends and I played on many a Japanese guitar. Sure, we thought Japanese guitars were cool and weird looking, but cost was the true deciding factor. You could pick up a Japanese guitar at any pawn shop in our town for under forty bucks. Harmony, Kay, Teisco, Univox, Silvertone, Lotus, and other names I can't recall were always popping up at practices and jam sessions. Nowadays, Japanese guitars from the 1960's and 1970's are increasingly hard to come across, but we are always on the hunt, and we have found some cool and interesting vintage Japanese guitars, amplifiers, and other stringed instruments from the Far East...
Hello everyone. Today we’re going to do a setup on a Les-Paul-style guitar. For this post, I’ll be setting up a “Burny Super Grade” guitar, but the set up is the same for most Les-Paul-style guitars. I already have a general electric guitar setup post over here: http://diystrat.blogspot.com/2011/03/how-to-set-up-electric-guitar.html, but there are a few Les Paul specific areas I’d like to go into here.
I would like to start off the list of the best small guitar amps by talking about one of the best small guitar amps out there, which unfortunately dedicated the entirety of its existence to being used for the purposes of laying acoustic guitars. Unfortunately, because I would love to have one of these to work with my electric guitars. On the other hand, the fact that the amp works with acoustic guitars best, means that those of you looking for a mini amp for your acoustic guitar are in luck. The amp does a great job of amplifying the sound of an acoustic guitar, keeping it clean and clear of any kind of electric distortion, so that if there was no increase in volume, nobody would understand the point of the pick up. While small, the pick up is still on the larger side as compared to the rest on the list. The design is vintage and cool, so that the guitar is enjoyable to look at for everyone.
Like many engineers, I learned the basics of recording guitars by doing live sound and occasional session work. But my "higher education" began when I was hired by a blues/R&B-oriented mail-order record company, and I "had" to listen all day long to recordings from the '40s, '50s, and '60s. No matter how primitive or poor the recording quality on those old discs, I was constantly amazed by the array of exciting sounds produced by electric guitar. Later, when I started recording blues sessions in my own studio, I learned firsthand about the key elements that contributed to the great tones that I'd heard on those classic recordings.
I am very pleased with my new guitar, it is perfect... beautifully crafted, comfortable, just perfect for me...Rosewood and spruce and dynamic design ...wow; top of the line case, and the price was substantially less than full price, less than 50%!. There was absolutely nothing wrong with its packaging, as the description indicated. I was a bit nervous thinking it was going to arrive banged up, scratch or damaged, but the box was in good condition and the case was impecable. I got it two days after ordering it, and played it the next day at a school concert. Next will take it to a luthier to get it set, get better strings and an amp. Totally souped! Thanks Amazon for my musical gift for the holidays!
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Custom - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Satin Oil, Transparent Black Sunburst
My brother owns a Norma acoustic guitar modeled on the Gibson Hummingbird. He bought it used in the mid 70s. Solidly built but only average sound. I would guess that like many Japanese made guitars from the 70s, Norma was not a "company," but simply an American sounding brand name chosen by a larger Japanese instrument manufacturer to market their guitars in the USA. I own a mid 70s Penco acoustic, same deal, name was used on Japanese made guitars marketed through the Pennsylvania Music Company, thus Penco.
The SSL-10 had become the SSX-10 ($387), with humbucker/single/single pickups, pretty much the same. This came with jumbo frets, a satin-finished neck and a 14 degree backward pitch on the head. The rosewood ‘board now sported the “wave” or triangular wave inlays popular on Kramers, Charvels and Jacksons of the period. No mention is made of vibrato, but that doesn’t mean it didn’t have a tradition-style unit. Colors were now Carrera midnight blue, metallic black, purple burst, dark red, white pearl and blue pearl, all with chrome hardware.

Its not exactly the same as an amplifier, but you can come close, or you can use the effects, looping capabilities and other features of the app to create new sounds that aren’t at all like what you would get from an amplifier. Many pro audio manufacturers sell foot pedals that feature amp modeling too - Boss, Digitech, TC Electronics, Roland just to name a few.
This mod is a little different—and definitely not as affordable as the ones we’ve been talking about up to this point. When players think about modifications that involve tuning machines, the subject revolves around tuning stability. That’s all well and good, but I’ve rarely encountered a quality machine that slips—because the mechanical torque required to turn the tuner’s capstan is pretty stout. Problems of pitch are usually more related to capstan wobble or a bad nut-slotting job.
This is the main component that separates acoustic guitars from electric guitars. A pickup senses the vibration from a string, transfers it to the guitar amplifier which then transfers it to the loudspeaker. There are many pickups but we’ll cover the four basic ones. The single coil pickup has a single coil of wire with two horseshoe-shaped magnets. They produce a bright, cutting sound and are quite noisy. The P90 pickup is a single coil pickup with one wide coil that increases the surface area of the strings, producing a bigger yet less bright sound. Humbucker pickups were designed with twin coils. They produce richer, warmer, more powerful sounds but roll back some higher frequency sound. Active-passive pickups use a battery-powered circuit to produce a powerful yet balanced tone across a range of frequencies. It outputs a balanced, clean tone.
Guitar amps for newbies aren’t going to sound as good as the professional rigs used by advanced guitarists, but surely you don’t expect that for under $100. However, they should still sound good. In fact, in my opinion a starter amp should be good enough that, once you’ve moved to a better main amplifier, you can still use your first amp for practice.
The fact that there are a lot of us belies a truth about learning guitar: It’s kind of frustrating. Unless you’re moving to guitar from some other kind of musical training, there’s a lot to adjust to right out of the gate. While a piano can sound reasonably good if you simply press a key, playing that same note on a guitar requires you to hold both hands the right way, situate the guitar properly, and make sense out of holding a pick.
Lastly, there is a core group of survivors in this company. Nice people but probably not the most dynamic or skilled. That said, they manage to get the job done under some pretty trying circumstances. Getting hired and quitting or getting fired after 6 months makes their job much more difficult because they needed to train you and it takes time away from their work only to have that person leave. If you don't have what it takes to work here then stay away because this causes more harm to all involved including yourself. There are people working under stress with families to provide for who don't need to get hosed by some 'guitar dude" who couldn't cut it. In summary, don't get starry-eyed because you think guitars are cool and that will carry the day. Think about what this place will do to your credentials and ability to move on to the next stage of your career which working at Gibson will force sooner than you expect and by all means, be considerate of those special folks who will have to re-fill the gap after you leave.
My guitar is in excellent condition and is all mostly original. The tuners are replicas of the original Klusons, and it came with non-original wooden legs. The legs were originally `sold separately, so it’s possible that the original owner opted for cheaper off-brand legs instead. I prefer to use a table-type keyboard stand anyway, mainly because it frees up more space for my feet underneath. This is my primary gigging steel; it’s reliable and versatile, and it usually turns a few heads as well due to its unique appearance. Aside from a broken name badge, it’s in excellent condition; it came with the cleanest original Valco case I’ve ever seen. There is some slight deterioration of the chrome plating, but otherwise there is little wear to be found. I previously owned a Supro Console Eight, and liked it so much that I traded it for the double-neck version. The Console Sixteen is a rare bird because it was produced only briefly; it first appeared in the 1958 Supro catalog and last appeared in 1959.
Sometimes referred to as a fret “dress” and setup, The Works includes precision level, re-crown and polish of your instrument’s frets along with complete set-up of truss rod, string height (action) and intonation. This work will minimize fret buzz, eliminate fret pitting and divots, and improve your overall tone! The whole instrument will be cleaned and polished and all hardware and electronics inspected, cleaned, and lubed.
Why We Liked It - As with Gibson’s other premium products, this is not a cheap electric acoustic, but you do get exactly what you pay for. One of the very best and most legendary acoustics with an electric edge. It’s going to be the guitar of choice for real enthusiasts and of course touring professionals who will settle for nothing less than the best. If you are on a budget, try one of these cheaper electric guitars.
I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.

The S2 Custom 24 features a mahogany body with book-matched flame maple top, that follows the same double cutaway shape and detailed arch as the original Custom 24. The guitar's mahogany neck is also not far off, being rafted from mahogany with PRS' distinctive 25" scale length. It has a 24-fret rosewood fingerboard that has a comfortably narrow nutwidth of 1.656". Finally, the S2 Custom 24 owes its voice to its dual humbucker pickups that include the S2 Vintage Bass and the S2 HFS Treble - which provide PRS' characteristically open and clear tone. You can push or pull the tone knob for single-coil tones should you need them.
It's all well and good picking the pioneers of Solo guitar but no way are they at the standard of the guitarists out these days. I do think though that Hendrix definitely should be there. The man's got the best flow I've ever heard. David Gilmour is a must. He knows how to make a solo sound good. Clapton isn't even there? You put Jack White there and Clapton isn't there? Who the hell compiled this thing????

: I have a similar guitar to the one you bought. It was my grandmothers and I'm estimating it at over 30 years old. Very folk style. She told me she actually had the original strings from when she bought it! I believed her when i tuned the thing and the day after found that the 4th and 6th had snapped. From what i know, Decca just made guitars around that time, 60's to 70's. Mine says it has a steel reinforced neck and it is really heavy compared to others. its still in really good shape and I actually play it. I'm not planning on selling it but I know its well worth its age. It has a hand chissled Ser. # on the bridge.

Overdrive / distortion pedals are one of the most important effects on your board and are very much a personal taste. The ones on my pedal board change all the time, I have more than a few that I really like; Analogman King Of Tone, Pete Cornish SS-3, Ibanez Tube Screamer, Boss Blues Driver, Nobels ODR-1,  Zen Drive, MXR Distortion +... and I like and use all of them. Probably my all-time favourite os the King Of Tone, but on a budget, the Nobels ODR-1 is great value and runs with the very best!
The world is full of amps. It is so full of them in fact that it is somehow hard to choose not because there is not enough good ones, but too many of them. Which is very unfortunate, as it raises the entry level requirement for understanding what you are buying. This means that a whole lot of people get intimidated when trying to pick an amp. Like if they want a mini amp that they would want to carry with them when they go somewhere. Which is why I sat myself down the other day, bargaining all the while, and compiled a list of the best small guitar amps, for the sake of all the big musicians trying to play them. Hopefully at least some of you will find it more or less useful, since I had to categorize these according to price, sound quality, tone quality, comfort of use and even the general usefulness. What I am trying to say is, it was a lot of work.

The fact that the output is electrical has made possible a dizzying array of sounds produced by electrically and electronically modifying this electrical output. Besides the volume and tone controls on the guitar and on the amplifier, a variety of outboard devices are used to obtain custom sounds and effects. As an attempt to organize these effects, consider the following classifications:
{"pageName":"[gc] pdp: epiphone slash firebird limitededition electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"36-month,24-month,60 month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";L20582;;;;evar65=New-Guitars-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
With 20 watts of rated power and an 8-inch speaker, the Champion 20’s sound output capability is a little above average for this class of amplifier. Those who like the features but need more power can check out the 40-watt version with a 12-inch speaker, the Champion 40, which costs twice as much but should be powerful enough for most jam sessions and gigs. The Champion 20 also includes a 3.5 mm line input for connecting a smartphone (good when you want to play along with recorded music or a music instruction app) and a 3.5 mm headphone output.
• Trapeze: Although the trapeze tailpiece was original equipment on the very first runs ofGibson Les Pauls, they are mostly the province of hollowbody and semi-hollowbody guitars, ranging from the L-5-CES to the Epiphone Regent. Early ES models also came with trapeze tailpieces. These devices attach to the heel of the guitar’s body and have slots for strings to pass through. Once the strings are installed and tightened to proper tension, the tension suspends the tailpiece in air — providing the appellation trapeze. The principle behind trapeze tailpieces is that they dampen the natural resonance of the strings less than stop tailpieces. These tailpieces also transmit the string tension to the guitar’s side, rather than its belly. The downside is they are the hardest tailpieces to string, since strings tend to drop out of their slots until they are at tension. In that respect, they take some getting used to.
{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000013039", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Ebony-1500000013039.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Ebony/J38676000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Ebony/J38676000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000-00-60x60.jpg", "imgAlt": "" } ] }

Rosewood is another commonly used kind of wood when it comes to the fabrication of guitars. Rosewood is typically dense, a reason why it is used when constructing a guitar’s fretboard. Although it can be employed in the making of guitar bodies, the resulting units are known for being a little heavier than the alternatives. These guitars can be either brown or blonde.

Guitar amplifiers vary in wattage. If you're playing to a massive audience, you'll want several 100-watt amps; however, for everyday use, that is overkill. If you merely want it for practice, a 10-watt solid state guitar amplifier will do, and if you're playing to a small venue, you'll probably want to consider a 20-watt valve amp. It's surprising how much sound a little amp will produce.
As someone else mentioned, it depends if this will just be a practice amp, or if it will be used to jam with others. Personally, I think a beginner should just get a small practice amp, but a good one. The reason is that you don't yet know what you will want tone-wise out of a gigging/jamming amp yet. So just get the best solid state modeling amp you can afford and worry about a bigger amp later.
Your circuit shows a conventional RC tone control with a further small capacitor wired directly across the pickup. If you regard that extra cap, not as an additional component, but instead as the self capacitance of the pickup, which is normally a few hundred pF, then your circuit is already present in almost all electric guitars. OK I realise I’m being a bit smartarse here, it did strike me as another way of looking at this.
Look at the action. Action is the distance between the fingerboard and the string at any given time. Make sure you hear no buzzing from the guitar when playing a note at a normal weight. Try it at the 5, 10, 12, fret, etc. and listen for the 'buzz' of strings banging on the frets below it. If any guitar is like this, ask the music store (any good one will do this for you) to adjust the neck if you can try it out in playable condition. If they can adjust it for you, then there is no problem, it just needed adjustment.

One of  the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.
I've been to a PRS factory and seen the precision and skill with which they are made. Their quality control is incredible: they test each one individually and make adjusments until it is perfect. They won't let a bad one get through so if you buy a PRS guitar, you are guaranteed a high quality guitar. I mean, with the high price you pay, how could they not be wonderful? Plus, they sound, feel, and look amazing. (I also got to see Paul himself; it was pretty cool. What a nice, humble guy.)

We have covered pickups here before so rather than running over old ground I suggest you read that article to get an understanding of the different types of pickups an electric guitar uses and how they work in greater detail. For the purpose of this article, however, all sound starts with your pickups. Pickups are essentially magnets, generally 6 small magnets wrapped in a very fine copper wire (over 7000 times), and can be better described as magnetic wire coils.

On a Strat, you can also replace one of your tone pots with a “blender” pot. This allows you to “blend” in the neck pickup when your selector is in the bridge or bridge/middle positions, and allows you to blend in the bridge pickup when in the neck or neck/middle positions. You can have the neck/bridge on, or all three on at once. There are slight, but noticeable, tonal changes from one end to the other, as the blend pot does have some attenuation. You do have to buy a specific blender pot to do it right; otherwise when turned down it won’t shut the third pickup off all the way. Super cool mod, and doesn’t change the look of your Strat.
No matter whether you used method A or B, you can now go about measuring the neck bow. This is done by measuring the string height (the gap between the ruler/string and the top of the fret) at about the 8th fret. There is a lot of debate over how straight a neck should be, and in fact it really is personal choice, but a height roughly the same as the thickness of a B string is a good starting point. Personally, I use a 0.012” feeler gauge to do this, but you could use a B string. Simply slide the feeler gauge/B string into the gap to see if it is too big/small.
I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.
Volume pots don’t attenuate all frequencies consistently. Treble gets attenuated faster which results in treble loss when volume is rolled down. Treble bleed circuits (or bright caps) are there to compensate for treble loss and make guitar sound at lower volume as close as possible to sound with volume maxed. There are several different treble bleed circuits used or recommended by guitar/pickup manufacturers. What’s common between them is that they are installed across guitar volume pot (input and output lug).

The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!

On the whole, Decca sold a lot of these guitars but the timing was awful.  By 1968 the demand for electric guitars had decreased dramatically.  MCA was about to bankrupt Danelectro, and CBS was cutting all sorts of corners on Fender instruments.  Darker times were coming folks, but for a moment, let’s rejoice in the mid 60s era of records and guitars!
Mr. White is an incredibly underrated guitarist. His singles (From the White Stripes) always span with just three to four chords and his simplistic blues rhythm and picking styles have him overlooked most of the time. However, his masterful use of the Digitech Whammy and is erratic playing make for some of the most memorable guitar solos ever. Check out Ball and a Biscuit and try not to like that solo. One of my favorite Jack White moments was during the 2004 Grammys, where he took 7 Nation Army and went into a cover of Son House’s Death Letter (another artist who I had to unwillingly cut out of the list). In an awards show celebrating Justin Timberlake and Missy Eliot, Jack White took time to give a salute to where things got started, to an artist born a century ago.

A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.