Have you ever looked at a hollow or semi-hollow guitar on the wall at your local music store and wondered how the heck they get the electronics in there? The short answer: it’s do-able, but not easy. In fact, it’s widely considered to be one of the most difficult jobs in the wide world of guitar maintenance. My tech charges extra for doing electronics work in a hollow-body, and he’s definitely not the only one.
Jump up ^ "New Sales Avenue Opened with Tone Amplifier for Stringed Instruments". The Music Trades. October 20, 1928. This tone amplifier is electrically operated either by alternating or direct currents. It consists of two major units -- an electro-magnetic pick-up and amplifying unit. The electro-magnetic pick-up is built within the instrument and is attached to its sounding board. The unit is connected with the amplifier, which produces the tone and volume required of the instrument.
The use of overdrive distortion as a musical effect probably originated with electric guitar amplifiers, where the less pleasant upper harmonics created by overdriving the amp are filtered out by the limited frequency response of the speaker. If you use a distortion plug-in without following it up with low-pass filtering (or a speaker simulator) in this way, you may hear a lot of raspy high-end that isn't musically useful. This is why electric guitar DI'd via a fuzz box or distortion pedal sounds thin and buzzy unless further processed to remove these high frequencies.
If you have any comments about what you see in this web site,  we would love to hear from you.  Our E-Mail address is below.  Of course we are particularly anxious to talk to you about our repair services or our handcrafted guitars.  But  --  don't let that limit you.  We would love to hear your ideas about any guitar related topic.  (One such e-mail led to the harp guitar project)   We WILL respond, generally quite soon.    If you have a question that you would like to see addressed in our Q& A page, let us know.  Our E-Mail Address is: hoffmanguitars@qwestoffice.net
Another consideration, and something you’ll read a lot about, is the pickups, which give the guitar its voice. There are two kinds of pickup in this price range: the single-coil (which gives a bright, sparkly sound) and the humbucker (which is fuller, meatier and perfect for rock and metal). Both are as common as each other in this budget range, and a guitar with a mix of both will offer you the best versatility.
Then, there are the venues where all you get is a vocal mic or two, where you're left to curate your sound all by yourselves. This category accounts for the vast majority of places a young band will play, and if you can hone your tone here you can hone it anywhere. What's most important is that you keep your amps low enough to allow the drummer to play at about 80% intensity. That way, the audience can actually hear all those important vocals, and when your drummer kicks it up to 100%, and you stomp on your distortion pedal, the audience will actually feel a shift.
The Quebec-based Robert Godin decided to create his own music instrument company in 1972. Today, the manufacturer sells its products under different brand names: Norman (entry-level and mid-range acoustic guitars), Art & Lutherie (entry-level guitars), Simon and Patrick (mid-range and high-end guitars), La Patrie (classical guitars), Seagull (entry-level and mid-range acoustic guitars), and Godin for electric guitars. Some models are equipped with a piezo and/or "synth" pickups. The body shape is pretty classic, somewhere between a Les Paul and a Telecaster. Among the most famous Godin players we have John McLaughlin and Leonard Cohen. The brand catalog is sorted in different series: Performance Series, Signature Series, Multiac (acoustic/electric hybrid), Passion Series (high-end instruments), 5th Avenue Series, plus some very original single models like the Glissentar, an acoustic/electric 11-string nylon-string fretless guitar!
I doubt I can bring anything relevant to this discussion that hasn't been said already but since I liked the article so much and the subject has puzzled me since I got my first guitar, I jsut have to pitch in. My first guitar was a cheap Jackson-esque strat the brand was Cyclone. It was significantly lighter in weight than my friends Fender stratocaster and I liked it for that reason from the beginning. It was just much easier and more comfortable to play, esepecially while standing. Maybe because of this I've been biased to doubt the whole tonewood thing. My experience is that most 'guitar people' (at least here in Finland) seem to think that lighter wood is simply a sign of a bad quality electric guitar. I talked about this quite recently with a local luthier, who is very sience oriented and uses rosewood as the body. Guitars he makes are so light that when you pick them up at first, it is hard to believe they aren't hollow. So I asked him about his thoughts on the density and / or other qualities of the wood affecting the tone and his responce was pretty much consistent with the article. Anyhow he did mention the _theoretial_ possibility of the waves to traveling to the wood and reflecting back to the strings _possibly_ affecting the sustain. As someone stated, in real life physics there are never completely isolated phenomena but you can draw a line whether a factor is significant or not. John's comment above would support the more dense wood to be better but my guess is that when it comes to the sound that is audible to human ear, the material does not count. How a guitar feels is a totally different matter and shapes the way the player hears the sound drastically. My intuition says that lighter wood might convey the vibration to the players body which would partly exlpain Butch's experience with guitars with different materials. I've never thought about that before but do find anything else than the strings resonating (springs, screws..) uncomfprtable.
Note that we paid little attention to the power ratings of these amps. Judging a guitar amp by its power rating is usually a bad idea for many reasons. First, small increases in power have almost no effect on a guitar amp’s maximum volume. All other things being equal, doubling the power gets you only a 3-decibel increase in output, which is barely noticeable. To get double the perceived volume, you need 10 times as much power. A 100-watt amp might be twice as loud as a 10-watt amp, but a 20-watt amp will only be slightly louder than the 10-watt amp.
You're headed in the right direction - don't stop! yes, the keyboardist should control vibrato directly with the fingers, not automatically with an LFO. The more you rely on the technology to play the music for you, the worse your results will be in the long run. Is your intention to emulate a guitar, or to achieve a similar kind of lead expression and sound control during playing? Because these two are very different.
My first guitar was an acoustic guitar made by Ibanez. At the time I got it, I was very into the acoustic-oriented bands that were dominating adult rock radio at the time, the mid-90s. You know, bands like Hootie & The Blowfish, Blues Traveler, the Goo Goo Dolls and Barenaked Ladies, for example. So this was perfect for me. I could imitate some of my current favorite acoustic guitarists and learn to play the basic chord structures of their songs. But the itch to do more grew, and I was ready to branch out into the foreign, exotic, sexy world of electric guitars. I bought one of those starter pack guitars that come with an amp, some power cords, a strap, picks, a guitar case, some kind of instructional materials, and everything you needed to transform yourself into Jimi Hendrix in a matter of days or even moments. I was all set.
Here we have another excellent FG160 for your serious consideration the Yamaha FG 160 Acoustic Guitar Made in Japan in the early - mid 70's from Nippon Gakki factory. This example is an early 70's a more RARE version Yamaha FG 160 again this example is the Made In Japan Nippon Gakki and not to be mistaken for the similar Korean version of the FG-160 which is also nice but not the same as these apples/oranges. This example is MADE IN JAPAN and was built well over 35 years ago and was built to very high detailed standards as well as some of the best Exotic grained Honduran Mahogany woods available ( see pics please for that detail ) in that time period to compete with the great Martin and now this Yamaha is quite well aged with beautiful patina of a true vintage instrument and is a true vintage guitar in its own right. This one has the Amber/Tan label and not the Red Label but the golden lable. The frets are very good - original. The guitar has it's natural age and patina with a few expected minor nicks,dings from a well loved and adult respected instrument. This fine example is here and in stock... We upon receiving have remove the strings cleaned and detailed the guitar oil rosewood and polish finish, and this guitar to plays very well and optionally available upgrade if wanted please ask us...may include new bone nut/saddle/ we have several of these old Yamaha's and they are truly amazing instruments very well compared to Martin, Taylor, Gibson for there fine construction and playability with amazing tone for this kind of money... Here s a link to Harmony Central if you care to rehttp://reviews.harmony-central.com/reviews/Guitar/product/Yamaha/FG-160+/10/1 All New pics ... Interested ? ask Thanks . .
Floor model Bugera 1960 infinium 150 watt all tube head. This amp never left the store until the closing sale when it was purchased by me. I have the shipping box, and all original packaging. Store owner had this in December of 2017, and used only as a store model. I gave it a thorough look, and checked everything out, and its all good. Do the research on these. They are very loud, and have had great reviews! Tube setup is auto bias ( so you dont have to send it to a certified tech to change out your tubes) three way switch to accommodate your speaker cabs in ohms. Really nice bang for the buck right here. I will accept any reasonable offer. Any questions please message me. Continental Us sales only.
• Brute force game : Offers the same realistic engine that can be found in STRUMMED ACOUSTIC 1 and 2 – ideal for chord accompaniment. It also contains riffs and a new game mode by picking Picking: just play a chord for creating very convincing arpeggio patterns. Reproduction of these new types of patterns should be completely familiar to users of STRUMMED ACOUSTIC.
The cool thing about this setup is the EQ bypass feature. In other words, you can completely nullify any effects of the EQ and tap into the raw tone of the guitar. That works great for those who want that authentic tone or to let the mix engineer handle the rest. Overall, this Takamine is rock solid in all aspects. It is a great alternative for anyone who's looking to extract the most out of their money who wants to try something other than a Martin.
Secondly, I have an Epi Les Paul 1960 Tribute that i had PLEKD, which made a big difference to how it plays. However; i have an ongoing issue with it since, the G string always plays muted - i have changed the strings several times since but to no avail, other than that it plays really well in my opinion albeit i am only a learner with little experience. I have gone through the steps in your article but again all to no avail - have you any ideas as to what may be causing the muted tone (that's how i'd describe it anyway) and any thoughts on a possible solution you may have would be welcomed.
Certainly the most desirable of the Martin body size is the 000, 0M, and D sizes. Many consider the 000 (and OM, which is essentially a 000) to be the ultimate guitar size, where others feel the "D" size is the best. It's personal preference. There are some interesting facts though about the 000 and OM sizes. (In Martin's 1934 catalogue, any flattop guitar that had a 14-fret neck was named an "Orchestra Model", while the older 12-fret design was named a "Standard Model".)
Being part of Schecter's upper tier guitar line, this one comes packed with premium appointments, including a nice looking arched quilt maple top that follows the double cutaway shape of the mahogany body. It also has a 3-piece set mahogany neck that can withstand angry riff playing while the ultra access heel allows for easier upper fret access when you want to hit your audience with high note solos. The guitar has a Sustainiac Humbucker on the neck (known for long sustained notes) and the high output EMG 81 Active Humbucker that's great for metal riffs. Other features include Floyd Rose 1000 Series Tremolo, 25.5" scale length and 1.625" nut width.
For example, bass guitar frequencies are on the relatively low end of the tonal spectrum. However, plucking a bass string can create a sudden, short burst of high and mid-frequency sounds. You need your bass amp to be loud enough to make those low-frequency sounds strong and audible in the mix, but you don’t want to flatten your band mates or blow out your speakers by sudden pops of high-frequency sounds.

As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.
This is a subsidiary guitar brand owned by Gibson. Epiphone makes the same models as Gibson - SGs, Les Pauls and what have you. The only real difference is the electrics, the circuitry, the wood and the finish, which to the normal eye/intermediate guitar player won't be able to tell apart from a Gibson. In fact, most of the musicians started out with an Epiphone because Gibsons are too expensive. John Lennon famously continued using Epiphone even after being able to buy Gibsons because he loved the imperfection of his Epiphone Casino.
Being by nature rather sceptical, I have to admit to initially dismissing many of the recording methods in this article as 'studio snake oil', and because there was usually too little time during my own sessions to experiment with new ideas, I'd usually end up with an SM57 glued to the speaker grille by default. Taking the time out to trial the above techniques in the studio showed me quite how much I had been missing — not only much better raw recordings, but also tremendous extra flexibility at mixdown. But don't take it from me — listen to the audio examples for yourself and make up your own mind. If they don't expand your recording horizons, I'll eat my SM57...
A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.

well it does not effect the strings electronically. however. each pickup depending on its position on the guitar is designed to pick up a specific range of tones. the pickup closes to the neck is meant to pick up the bass range whereas the one closest to the bridge is meant to pick up the treble(higher) end of the tonal spectrum. all that aside when you actually move the switch it might have a reverberation throughout your guitar because the switch is just really hard or stiff. it might need to be broken in no worries there.
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
Great for beginner guitar players, the electric guitar packages/electric guitar kits give you all the essential tools that’ll help you get started on your musical journey. These electric guitar packs typically include an electric guitar, a guitar amplifier, and various must-have guitar accessories including guitar picks,guitar straps, and an electric guitar gig bag.