Most users and experts agree that the Zoom MultiStomp MS-50G is a high quality and high value pedal. But it's not just about bang per buck, because many are satisfied with the quality of its effect and amp emulations. Even Music Radar is convinced of its performance saying, "While not all of the sounds are going to appeal to all players, there are enough usable tones here to make this a very practical item for just about anybody who uses effects."
With this high availability I can immediately check back with the program if I am unsure whether I am getting it right when practicing. I can play along to the backing track while practicing and I can continue with new material if I feel that I am ready to do so. All of this is simply not possible with a local instructor on a 30 minute per week basis.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
The brand boasts of a remarkable following. The famous Fender Stratocaster is deservedly regarded as the guitarist’s electric; it has a long lineup of musicians who used and still use it for studio recordings or live performances. A few names: Jimi Hendrix, Eric Clapton, George Harrison of the Beatles, The Edge of U2, and Jeff Beck of the Yardbirds. The enduring popularity of this model is largely due to its incredible versatility; it bridges styles and genres with ease.
When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]

The structure of the lessons are good, it varies between guitar technical stuff and theory as you progress, meaning that you won't get bored of any single topic, and you'll have a chance to try out the theoretical bits one step at a time. It's a shame they never made newer editions of this book with more graphics and supplemental audio-video tools.
Open tunings improve the intonation of major chords by reducing the error of third intervals in equal temperaments. For example, in the open-G overtones tuning G-G-D-G-B-D, the (G,B) interval is a major third, and of course each successive pair of notes on the G- and B-strings is also a major third; similarly, the open-string minor-third (B,D) induces minor thirds among all the frets of the B-D strings. The thirds of equal temperament have audible deviations from the thirds of just intonation: Equal temperaments is used in modern music because it facilitates music in all keys, while (on a piano and other instruments) just intonation provided better-sounding major-third intervals for only a subset of keys.[65] "Sonny Landreth, Keith Richards and other open-G masters often lower the second string slightly so the major third is in tune with the overtone series. This adjustment dials out the dissonance, and makes those big one-finger major-chords come alive."[66]
Martin factory action was traditionally higher than that used by makers like Taylor. Bob Taylor made his bones by offering acoustic guitars that felt and played like electric guitars. Martins had thicker necks, and higher action often called “Bluegrass action.” If you pick very hard, or do a lot of heavy hammer ons, lower action can be more of a problem if you want clean or pure notes.
I like most of the the 814's I've played though they seem just a bit brighter than some other guitars along that range. I prefer Collins guitars they're kind of in between the Martin sound, and the Taylor's brighter sound. After recording with several different ones. My favorites productions are Collin's OM1A , and more affordable Blueridge, and Recording king. I prefer Rosewood back and sides, Adirondack top, mahogany neck, with ebony fingerboard. Although mahogany back and sides with Sitka/ Engelmann tops sound nice too. When recording I think (might just be me) that I get better note separation from the Collins
Second, the right side of the pedal is a feedback controller and a series of knobs that allow you to adjust the Sonic Maximizer feature. This hallmark of the Acoustimax basically streamlines your guitar's tone, matching up the lows and highs of your acoustic's resonance and projecting them at the same time. Without this feature, the tone of an amplified acoustic can be inconsistent, projecting higher frequencies earlier than the low end resonance.
Your skill level on the guitar is another factor that should be taken into consideration while shopping for the perfect instrument. It is generally wise to start out with a lower quality model when you are first beginning to study the guitar, whereas a veteran player with a trained ear will likely require the bells and whistles of more high end gear. If you’re a beginner, it’s a great idea to start out with a Yamaha or a Fender Squier, for example, as you get plenty of quality to learn on without breaking the bank. It’s wise not to go overly basic, however, as cheap guitars will have harsh playability that will leave a beginner with painful calluses that may scare them away from the instrument.
Phase Shifter pedals found their way into the guitar community in the 70’s with pedals like the MXR Phase 90, Mutron Phase Shifter, EH Small Stone, Foxx and others. The sweeping sound it produces is unmistakable and a legendary trademark of many guitarists sound. The MXR Phase 90 can be heard all over Van Halen 1 and II. Brian May used the Foxx phase on “Sheer Heart Attack,” The Eagles “Life In The Fast Lane”, and Led Zeppelin’s “The Rover” to name but a few.
I thought I'd give a review from the point of view of someone completely new to the guitar, for those of you out there like me who are wondering if this will really teach you or if it'll be a frustrating waste of money. First off, I'll say that it isn't easy. As someone completely unfamiliar with the frets and the strings, I had a tough time starting out - very slow and clumsy. BUT, you'll see improvement REALLY quickly. I've only been playing for about two hours and although I still suck, I'm having a great time and I'm already loads better than I was when I started out. The only reason I stopped was because my finger got sore from holding down the strings. So far, for someone who's wanted to learn and either never had the time or money to take lessons, or found practice to be tedious and dropped it, or just doesn't have a mind for reading music, this is a definite recommendation. If anything changes as I get further along, I'll update this review. But as of now, I love it!
According to Michael Wright of Vintage Guitar magazine, Univox itself has a rather convoluted history. Though it was a part of the “lawsuit era” of the ‘70s, Univox wasn’t just another copy manufacturer out of Japan. It’s a bit more complicated than that. The firm was created from a joining of multiple companies that had a few other name brand guitars – Hagstrom, for one – under their corporate umbrellas.
Epiphone also makes several less common models of the Les Paul such as the “Les Paul Goth”, “Les Paul Goldtop”, “Les Paul Ultra” and “Les Paul Ultra II”, “Les Paul Custom”, “Les Paul Black Beauty”, “Les Paul Prophecy Series”, “Zakk Wylde Custom Les Paul Model”, “Slash signature Les Paul Models”,the “Les Paul Studio”, and the most current, “Joe Bonamassa ’59 Gold Top Les Paul”.[27][28][29]
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring

Music is a passion for many people around the world. There are possible over 3000 musical instruments in the world, right from the most traditional ones to the highly sophisticated modern ones. Guitar is one of the most stylish modern musical instruments known to man. A lot of young stars are actually inclined towards playing a guitar. The guitar is an instruments which produces sound on the strumming of strings attached to the strand, which is like a long bar on the upper portion of the guitar. There are a number of manufacturers who manufactures these amazing instruments. But question is which the best are? Here is a list of top ten brands of guitar to choose from:
On May 1, 2018, the company filed for Chapter 11 bankruptcy protection. As part of its debt restructuring, the company will close down and liquidate its unprofitable Gibson Innovations division, which sells audio equipment outside of the U.S. and has been the source of much of the company's financial troubles. The restructuring will allow Gibson to focus on its most profitable ventures, such as musical instruments. No changes will be made to its guitar manufacturing business, and all Gibson and Epiphone branded guitars are expected to continue in production uninterrupted. Additionally, $135 million was provided by existing creditors to provide liquidity to maintain existing operations.[57][58]
Completely agree. A couple years ago I was also wanting a software guitar to play some simple chords over a track. Instead I spent about $140 on a guitar from Craigslist. A couple weeks and a couple dozen YouTube tutorials later and I was able to play the chords myself. Learning to play the instruments is a valuable skill that will separate you from others who just use software.
I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
as an old school country picker i prefer the fender tele for the crisp twangy sound and also the feel of the fingerboard. I find a strat to be poorly designed with the volume control badly in the way to say nothing about the clumsy tremelo arm. I have modified some strats and made them playable for my slyle.A humbucker in the neck position on a tele is rite sharp for the blues.As for gibson they make a fine instrument,just not my style.
Can be useful after the distortion pedals to shape the sound, and they can also be used as a boost pedal. Remember that boosting here will increase the signal going into the following pedals, and in some cases this may cause 'clipping' (unwanted distortion if the input to a pedal is too high). I don't tend to use EQ much these days, but this is where I placed it when I did, just be careful with how much you boost.
Specs for combos were as follows: Checkmate 10 (6 watts, 6″ speaker, two inputs, striped grillcloth); Checkmate 12 (9 watts, 8″ speaker, three inputs); Checkmate 14 (14 watts, 8″ speaker, three inputs, tremolo); Checkmate 17 (20 watts, 10″ speaker, tremolo, reverb); Checkmate 16 bass amp (20 watts, 10″ speaker, volume, tone); Checkmate 17 (20 watts, 10″ speaker, reverb, tremolo); Checkmate 18 (30 watts, two 10″ speakers, reverb, tremolo); and Checkmate 20 (40 watts, 12″ speaker, reverb, tremolo). Piggyback amps included the Checkmate 25 (50 watts, 15″ speaker, reverb, tremolo); Checkmate 50 (two-channels, 100 watts, two 15″ speakers, reverb, tremolo, “E tuner”); Checkmate 100C (two channels, voice input, 200 watts, two 15″ speakers, reverb, tremolo); and the big hugger-mugger Checkmate Infinite (200 watts, two 15″ speakers, stereo/mono preamp section, reverb, tremolo and a bunch of other switches). The one shown in the catalog actually has a block Teisco logo and carried the Japanese-marketed name – King – in the lower corner.

TASTING NOTES: The dynamic mics have the sharpest, edgiest tones. The condensers have a neutral, full-frequency sound. The ribbons have rounded highs and warm lows. Remember, though, that the prettiest sound isn’t always the best choice. Many engineers swear by the relatively harsh Shure SM-57, and not just because you can buy one for less than $100. Its tough, even brittle, edge can shine in aggressive rock mixes.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
Most delay pedals have controls for the number of repeats (called “feedback”), the volume of the repeats and the time between each repeat. Some pedals have what’s called “tap tempo”, where you can tap your foot on the pedal and the delay unit will match the speed of the effect to your foot, allowing you to match the delay time to the tempo of a song. Delay pedals are often used to thicken up heavy lead guitar sounds, or to subtly add more to a simple rhythm guitar part.

Some effects produced dramatically weird sounds that were largely impossible to pull off. The peculiar 1948 DeArmond Trem-Trol (used extensively by rock-and-roll pioneer Bo Diddley) altered the volume of the guitar signal by exposing the connecting pin to a brass-and-glass canister half-filled with shaking, water-based electrolytic “Hydro-fluid.” The shaking—and often leaky—fluid washed over the pin and would bend the signal’s volume, causing an oscillating, watery tone. In the words of Chris Gray, one of its few remaining owners, “This is not a subtle effect—it adds all its personality to your sound whether you’re ready for it or not.”
Electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. Every electric guitar player needs an amplifier because most electric guitars are barely audible without one. You’ll need one to play with other musicians, which is one of the most important ways to develop your musical skills. Because the amp is as important to a guitarist’s sound as the guitar, most teachers consider it essential to use an amp at least part of the time when you’re practicing. You can’t develop your own sound without spending some time experimenting with the controls on your amp and guitar.

Traditional sets can sometimes feature vastly different tensions between strings, causing players to compensate with altered techniques. New York string icon D’Addario set out to even the playing field with its Balanced Tension XL sets, which boast mathematically equalised resistance for a similar feel from string to string. That means even effort when bending, strumming, plucking and slapping, and even improved dynamic control.

This is the name given to the amplifier, separate from the speakers. It’s the pre-amp and amp in one box, which is usually placed on top of a cabinet or a stack of speakers. This is a common configuration for large venues, and it might be useful to have a separate amp head if you play a lot of festivals or “battle of the bands” events, where the speakers are generally provided by the organizer.
Many of the modulation type effects pedals are made to approximate some aspect of the original rotating speaker.  That’s correct, you heard right.  The Leslie Cabinet was made as a companion to the Hammond B3 Organ and literally had a rotary speaker that could produce all of the common modulation effects depending on the speed setting.  Many companies now offer digital pedal versions that mimic the Leslie sound very well, so lugging around a huge speaker cabinet isn’t necessary, unless you are a purist or have a crew of roadies available.
The world of audio effects is one that can be confusing even for experienced engineers. Especially in modern computer-based recording systems, there's a bewildering array of options, and to add to the confusion, some effects are widely referred to by more than one name. In this article, I'll take you through the most common effects, explaining how they work and where you might want to use them in your music. Meanwhile, SOS 's team of writers has contributed a wealth of expert tips and tricks, which you can find in the boxes scattered through this article.
Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.
Sweet and tasty Smooth Jazz track. Featured electric and acoustic pianos, electric organ with synth. Rhythm electric guitar playing chords and another creamy electric guitar playing solo. Also, this track has warm and wide bass guitar with drums and percussion. This track is great for presentations, advertising, real estate background, Youtube and other videos.
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please
 South Korea has been one of the largest OEM guitar factories in the world since 1980's. Nonetheless, the words "Made in Korea" still invoke visions of low cost alternatives to high-end manufacturers. At Swing, our mission is to lay these stereotypes to rest, and show the world that we can produce true professional grade instruments, made by professionals, for professionals. (Of course, company is not a patriotic organization. This is a matter of manufacturer's pride and self-satisfaction that can be called "Professionalism".)
Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.

It wouldn't be called a tribute if it didn't follow convention, so having a mahogany body with an arched maple top is expected. Epiphone also designed the neck to mimic the playability of old LPs, giving this guitar a 1960s SlimTaper D profile. However, what makes the Epiphone Les Paul Tribute Plus stand out is the use of two Gibson USA '57 Classic humbucking pickups, which essentially gives this Les Paul a more premium Gibson voice, at a fraction of the price.
While most beginner electric guitarists focus on the actual guitar when purchasing equipment, the amp actually plays a far larger role in the overall sound. The best made guitar in the world is not going to sound good through a cheap, poor quality amp. However, any decently made guitar can sound quite good when played through a good amp. So, a guitar amp should not be an afterthought purchase for a beginner.
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.
This list would have been incomplete without us mentioning the Shure SM57-X2U. Because it is a plug and play device, as it uses USB connectivity, this microphone enables its user to record itself/herself while jamming to his/her favorite songs.  As its manufacturer claims this unit is capable of offering a frequency response that is tailored for vocals. What is more, the model also has brightened midrange as well as bass roll off.

The Fender T Bucket is a great choice for beginner guitarists looking for a great sounding entry level acoustic. It is frequently the top choice for new guitarists looking for a an affordable acoustic guitar. Many owners site it’s ease of playability as one of its greatest attributes. It is available in 3 different color combinations: 3-Color Sunburst, Moonlight Burst, and Trans Cherry Burst. It is made of maple wood. It has a preamp installed, making it an acoustic electric. It is our top pick for the best acoustic electric under $500. It is a great choice for beginners.

pedal bass fender stratocaster electric amp left handed guitar fender telecaster gibson les paul telecaster ibanez epiphone martin guitar fuzz prs taylor guitar gretsch electro acoustic guitar les paul gibson sg marshall stratocaster fender precision bass tokai rickenbacker free fender bass fender jazz bass resonator guitar 12 string guitar fender amp fender jaguar
I don't remember if it was actually an LP special II, but the first guitar I bought with my my own money at about the age of 15 was an absolutely beautiful Epi Les Paul. Black, with a really nice quilt maple top. I fell in love with the way it looked. Well, it turned out that guitar sucked. I mean it really sucked. Bad intonation, bad tuners, bad pickups, bad bridge, everything.I saved up my money sacking groceries for like 6 months and I ended up spending that hard-earned money on a crap guitar. I put it on layaway and my dad would drive me up to the store once a month and every time he would try to talk my into other guitars, Fenders mostly (he is a musician also). Nope. I really liked the way the guitar looked. I was young and stupid.
I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
{ "thumbImageID": "ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst/J57125000001000", "defaultDisplayName": "Alvarez ABT610E Baritone Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000217496", "price": "399.99", "regularPrice": "399.99", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Alvarez/ABT610E-Baritone-Acoustic-Electric-Guitar-Black-1500000217496.gc", "skuImageId": "ABT610E-Baritone-Acoustic-Electric-Guitar-Black/J57125000002000", "brandName": "Alvarez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Shadow Burst", "sku": "sku:site51500000054240", "price": "349.99", "regularPrice": "399.99", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Alvarez/ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst-1500000054240.gc", "skuImageId": "ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst/J57125000001000", "brandName": "Alvarez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Bubinga - Neck Construction: 3 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG 707 - String Instrument Finish: Black
After the dissolve of Kay/Valco in 1968, the Engelhardt-Link company bought the upright bass and cello lines[clarification needed] at the asset auction in 1969, and continue to produce the same instrument lines till today. Manufactured in Elk Grove Village, Illinois, Engelhardt basses and cellos are sturdy instruments, widely used by students and touring professionals. The ES9 Swingmaster bass (formerly the Kay S9 Swingmaster), is highly thought-of by jazz, swing, and bluegrass musicians.
DIY Pedal Kits – supplies hand made guitar effect pedal kits from the UK. All you need to complete their kits are a small number of basic tools. These are a soldering iron, screwdriver and wire cutters/strippers. In addition, needle nose pliers make things a LOT easier but they aren’t essential. Included in each kit is a pre-drilled metal enclosure, 3PDT true bypass) switches (if applicable), high-quality quarter inch jacks, all wire, solder, heatshrink, components, etc needed for the build, 2.1mm center npower supply socket and full color build guide.

Loose frets are especially problematic in certain old guitars, but are generally very easy to fix. You'll be amazed at the difference you can make with just a few tools, a bit of knowledge, and a little time. Fixing loose frets can eliminate fret buzz, remove sharp fret ends, and greatly improve the tone of any guitar. If your luthier bill will be greater than the value of your guitar, definitely time to have a go yourself!
Paul Landers, of Neue Deutsche Härte band Rammstein has a signature guitar based on his custom-built guitar. It features a mahogany body with a maple cap finished in satin black with silver binding only around the front of the body. The neck is also made of mahogany and features an Obeche fingerboard with no inlays or binding. Hardware includes a hardtail tune-o-matic bridge and Grover locking keystone tuners. The guitar also feature chrome-covered EMG pickups; an 81 in the bridge, and a 60 in the neck. It also only has a single volume control and a 3-way pickup toggle switch.
Solid body and Hollow are just two of the electric guitar types.  In many ways, the Semi-Hollow Body guitar is synonymous with Gibson’s ES series from 1936.  There have been many variants produced by Gibson itself, as well as copies built by other companies, but they all hark back to this original design.  Even though Rickenbacker first released the Semi-Hollow guitar, the ES-335 is now the mainstay in the world of guitar.
Now that we’re comfortable with the basic wiring of a guitar, we can look at some of the more popular mods. This article introduces mini toggle switches and push/pull pots, and shows how we can use these to modify a Strat in such a way as to allow use to add the neck pickup to any selection. This expands the number of available pickup combinations to 7.
The company’s reputation and output continued to grow. Forays into mandolinmaking in the late 1890s and ukulele making in the 1920s greatly contributed to their expansion, and by 1928 they were making over 5000 instruments per year. The company remained family-owned and employed a relatively small number of highly trained craftsmen making instruments primarily by hand. By the early 1960s Martin guitars were back-ordered by as much as three years due to limited production capacity. In 1964, Martin opened a new plant that is still the primary Martin production facility.
With so many guitar manufacturers hot rodding the Stratocaster, it is refreshing to see brands like ESP going after the other popular guitar shape, resulting in the "Super LP" guitar like the ESPT LTD EC-1000FM. This souped up version of the classic single cutaway body combines traditional looks with modern tones and playability, resulting in a fast playing axe that's easy on the eyes, and not too edgy.

One of the most appreciated brands on the market at the current time, the Epiphone by Gibson surely won’t let you down. The company was founded 144 years ago by Anastasios Stathopoulos and is still running today. This brand is known for producing top-notch guitars that many players love and recommend, the reason why its popularity increased over the years.
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
All six strings are made from nylon, or nylon wrapped with metal, as opposed to the metal strings found on other acoustic guitars. Nylon strings also have a much lower tension than steel strings, as do the predecessors to nylon strings, gut strings (made from ox or sheep gut). The lower three strings ('bass strings') are wound with metal, commonly silver-plated copper.
But here at Uberchord (click to download the free guitar learning app) we get that your dream is maybe about playing electric guitar. And if that’s what you want to do, then starting out with a good electric instrument makes sense. But what makes a “good” guitar? Well, if you are confused about what kind of Guitar to buy, you can check out our post on: Types of Guitar: Beginner’s Guide to Buying A Guitar.
With sharp double-cutaways and the recognizable Rickenbacker body shape made from maple, the semi-hollow Rickenbacker 330-12 12-string electric guitar has proven to be one of the brand's most popular models since the 1960s. The 330-12 has been used for its jangly sound, perfect for pop and various other genres, by the likes of Tom Petty, Johnny Marr, and Peter Buck, to name a few.
Boost effects are simple effects that increase overall volume. However, every boost pedal is very unique and often sounds different. It always comes down to the type of components the effects pedal manufacturer used to achieve the volume boost. Some boost pedals try to maintain the guitar tone while providing a volume boost, others can heavily affect the guitar tone while providing a volume boost. Oftentimes, guitarists will get a specific boost pedal and use it as an always-on effect because they like the way the boost pedal colors their tone.
Claimed to have been invented by guitarist Victor Griffin of Pentagram (who tunes it 1/2 step down).[37] Also used in the song "March of the Fire Ants" by Mastodon, "Rusty Cage" "Holy Water", and "Searching With My Good Eye Closed" by Soundgarden on their Badmotorfinger album, "Cowboy Hat" and some of "Silver Side Up" by Nickelback, "Gasoline", "Shadow on the Sun", "Bring Em Back Alive" and "The Worm" by Audioslave and "Prison Sex" by Tool. Today is the Day have used it on every album since Temple of the Morning Star, Shining use it on most of their album Blackjazz, and Black Label Society used this on much of their early material, often to emulate a 7-string guitar. Used also by Silverchair in the songs "One Way Mule" and "The Lever" from their album "Diorama".

Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.
Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
It also comes in a colour that is unique and leaves most other guitars in the dust - their OPB colour, or Open Pore Black finish. It’s a matte black guitar. Matte (or a satin finish) means that you won’t have the grubby finger marks or oil stains that a glossy finish would have. Plus, if you play for a while and your palms get sweaty, this matte finish won’t be slick and slipper - unlike guitars with a glossy finish.

Much like any other job or hobby, building guitar pedals requires specific tools in order to get the job done. Furthermore, before you start putting together your first build, it is vital that you have a significant understanding of how to solder circuit board electronics – otherwise you may find yourself at a loss due to faulty soldering (believe me, this is not a fun issue to troubleshoot).  If you need to practice soldering, here is a helpful video.
The electric bass was invented in the 1930s, but the instrument did not sell well until Leo Fender developed the Precision Bass in the 1950s. As such, the type of bass players who first began trying methods to make their instruments louder with amplifiers and speakers were upright bass players. While the upright bass is a large instrument, standing about six feet tall (with its endpin extended), due to its low register, it is not a loud instrument when played acoustically. This is largely a result of the decreased sensitivity of human hearing, which is most sensitive to mid-range tones; equal perceived loudness for a mid-range sound and a low frequency sound requires much more acoustic power in the low-frequency sound. In the 1890s and early 1900s, upright bass players performing in bars and brothels in an era before amplifiers and speakers were available, particularly those who performed in bands with louder instruments such as trumpet, often found it hard to be heard. About the only solution available in the pre-amplifiers era was playing slap bass, a style of slapping the strings against the fingerboard to make a relatively loud percussive sound. Beginning in the 1920s, the first amplifiers and speakers designed for gigging musicians became available.

Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.
Johnny Marr: I'd already played a couple of shows before that with a couple of bands. I'd been in a couple of bands before I met Andy, even though I was fourteen or fifteen at the time. We met in school, Andy and I. I'd been playing in these little kid's kinds of bands at twelve and thirteen. When I got to fourteen and fifteen, I got invited to play in a couple of bands with much older guys.
Great Condition, "335-style" hollow body / Thin-Line, Japanese Electric Guitar by Diasonic. 2-single coil Pick-ups. Great black to red see through Sunburst finish. Bound, Rosewood fingerboard  w/ dot inlays and solid mahogany neck. Four bolt neck joint, double bound body and laminated top, back and sides for excellent long-term durability and great feedback control. "Trapeze" tailpiece w/ rosewood bridge, featuring adjustable string spacing. Separate on/off's for each pickup, Volume and Tone and adjustable truss rod. Very shiny. Finish and wood in great shape. Virtually no wear to finish. All chrome perfect and rust-free. Original pick guard perfect and intact.  Pickup bezels have minor issues, see above photos for details. Plays and sounds great. Whammy bar included! Frets in great shape with minor, virtually no wear. Nice flat frets for speedier action. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .010 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!),  and cleaning and polishing. Plays and sounds great. We also installed a new set of .010 "Round-wound" strings.
Gibson's first production electric guitar, marketed in 1936, was the ES-150 model ("ES" for "Electric Spanish", and "150" reflecting the $150 price of the instrument, along with matching amplifier). The ES-150 guitar featured a single-coil, hexagonally shaped "bar" pickup, which was designed by Walt Fuller. It became known as the "Charlie Christian" pickup (named for the great jazz guitarist who was among the first to perform with the ES-150 guitar). The ES-150 achieved some popularity but suffered from unequal loudness across the six strings.