Featuring a small scale neck, the Squier by Fender Mini Strat Electric Guitar comes with three single-coil electronic pickups, with solid and intuitive master volume and tone control. The neck of the guitar is made of C-shape maple wood design, whiles the rosewood fretboard holding the strings and containing dot markings is designed in a manner that makes it easy to strum.
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
Another classic yet quite rare tone wood, Korina, has a lengthy Gibson pedigree. This elegant, fine-grained wood, also known as African limba, was chosen as the wood for the super-collectible Modernistic Series guitars of the late 1950s, and lives on in the ’58 Explorer and ’59 Flying V available today from the Custom Shop. Korina possesses some similarities to mahogany, particularly in its warmth and resonance, but it also yields degrees of clarity, definition, and sustain that are all its own.

Hi! In this instructable I will be showing you how to fix and/or upgrade guitar electronics. This is applicable to most electric guitars, but I will be using a Fender Stratocaster. It is easier than most people think, especially if you know how to solder. Before you start, find a wiring diagram for your guitar and purchase the parts that are needed.
Certainly, the response to these innovative guitars at the time gave no indication. They tanked pretty quickly. No one has ever even seen a real Moderne, and players didn’t warm up to the Explorer and V until the 1970s. These models even inspired at least two new American brands – Hamer and Dean – both dedicated to making “improvements” on the Gibson originals. Japanese manufacturers also picked up on the appeal of these designs.
The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
Classical Guitar The classical guitar is a variation of the Spanish Guitar, from its construction, size, weight, wood and the sound it produces. Classical guitars have six nylon strings, rather than metal strings used in other acoustic guitars. The shape, construction, and material of classical guitars vary, but typically they have a modern classical guitar shape, or historic classical guitar shape (e.g., early romantic guitars from France and Italy). Classical guitars are also typically played with the fingers rather than a pick (as steel-string acoustic guitars are often played).
At the beginning of the 1920s, Andrés Segovia popularized the guitar with tours and early phonograph recordings. Segovia collaborated with the composers Federico Moreno Torroba and Joaquin Turina with the aim of extending the guitar repertoire with new music.[14] Segovia's tour of South America revitalized public interest in the guitar and helped the guitar music of Manuel Ponce and Heitor Villa-Lobos reach a wider audience.[15] The composers Alexandre Tansman and Mario Castelnuovo-Tedesco were commissioned by Segovia to write new pieces for the guitar.[16] Luiz Bonfá popularized Brazilian musical styles such as the newly created Bossa Nova, which was well received by audiences in the USA.
Our congratulations and deepest thanks on making Ibanez your choice of instrument. Ibanez standards are second to none. All Ibanez instruments are set up to our strict quality control standards before shipping. The purpose of this manual is to explain how to maintain your instrument’s finish and to keep your guitar playing as well as it did when it...

Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!


Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.

First, we decided that we're going to limit this guide to floor-based multi-effects units, and we also deliberately included only those with different effect types/blocks. After looking at currently available units, we ended up adding a total of 24 multi-effects pedals to our database. All relevant reviews, ratings, forum discussions, and expert opinions were fed into the Gearank algorithm, which gave us the scores that we used to narrow down the list to just the top 10 - over 5,200 sources were analyzed during this process. We then listed each of them with important specifications and features, along with noteworthy feedback from actual users and expert reviewers. Finally, we decided to make a divide the list into two categories: compact multi-effects pedals (since many are looking for them), and medium to large size ones. For more information about this process see How Gearank Works.
The least expensive practice amps and basic combo amps may only have a single indicator light: an LED to indicate when the amp's power is on. More expensive amps may also have LEDs to indicate when the preamp has a signal present from the instrument (helpful for troubleshooting during set-up, because if the amp is not producing any bass sound even when the bassist is playing, and the "signal present" light is illuminated, this indicates that a signal is reaching the amp); when a limiter or similar speaker protection feature is activated (e.g., Peavey's DDT system); when clipping is occurring; or when the amp is in standby mode. Amps with a built-in tuner typically have several LEDs to indicate when the note being played is flat, sharp, or in tune.

Explore the myriad wood combinations in the Gibson lineup and see what’s right for you. Trying to finetune your tone without regard to what your wood is kicking out in the first place can be a frustrating venture, but learn to work with the organic template of each specific model, and you’re already swimming with the tide. Be at one with the heart of the wood, tune in to the voice that resonates deep within even the unplugged electric guitar, and you will go a long way toward understanding, and crafting, your own unique tone.

Clapton is good… not gonna argue that he is an amazing guitarist… but no where near the best guitarist of all time…. Satriani can play ANY clapton riff, solo, song, chord progression, whatever.. Clapton can’t come close to playing any of Joe’s stuff. And most of Claptons best songs are JJ Cale tunes. Cocaine, Layla, After Midnight, etc,…. etc…. Oh and Clapton put out a whole album dedicated to Robert Johnson and admitted that most of the songs are redone and reworked because “the man” Clapton couldn’t play em anywhere near as well as Mr. Johnson.


As you will see, our list embraces outsiders, trailblazers, outliers, and Eugene Chadbourne playing a rake. We don’t worship “guitar gods,” but prefer our axe-wielders to be resourceful, egalitarian, flawed, and human. We’re not drawn to Olympic feats of fleet-fingered athletics, unless they’re used for unique and exploratory ends. We see the mewling histrionics of Jeff Beck as tyranny instead of catharsis. The name Derek Trucks is practically alien to us.

It’s true that the best guitars are built from the inside out, and Vintage enjoys a well-earned reputation for building great vintage electric guitars. Working with acknowledged guitar industry guru Trevor Wilkinson, Vintage has created a fantastic line-up of Wilkinson-equipped Vintage electric guitars and basses. Using Trev’s excellent range of pickups, tuners and hardware has taken Vintage electrics to the next level.
The Fender Stratocaster Squier is possibly the most recognizable shape in electric guitar history. The Fender Stratocaster design is mimicked by manufacturers all over the world. Fender produces its own line of budget “Strats” called the Squier series. If you want to start with an electric guitar, chances are you’ll buy something like this for around $130 USD.
Tube Is Probably Not The Way To Go – Don’t get me wrong, I am a fan of tube amps. There are a lot of great things about them, but in most cases, tube amps are a lot more expensive than solid-state amps. They are also harder to maintain and keep working. While you might want the tone of a tube amplifier, a chance is you can’t afford it as a beginner and neither do you have to afford it. As a beginner, at least I, did not have enough skills to make full use of tube amps so why spend money on a model that you cannot fully make use of? Apart from that, solid-state, especially practice ones are renowned for their durability. Whether you play it for hours on end or have a small accident you probably won’t damage it (unless you really try).
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:
Quality-wise, they range from complete and utter crap, to OMG! Acoustics, tend to fall into the former range. Electrics, mostly the hollow bodies, were somewhat, but not always better. Solid bodies, mostly made from plywood, BUT they do have their own feel and sound. I happen to love them, others despise that cheap feel and sound. Remember, they were built to fill the growing demand of guitars, that the kids saw on tv, with the Monkee's and the Beatles

1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD
10% of our readers voted for brands that were not listed in the survey. So, besides G&L, Jackson, Yamaha, Danelectro, Charvel, Cort, Washburn, Framus, Parker, Dean, B.C Rich, and Aria, you might also want to check Duesenberg, Wild Customs, Mayones, Caparison, Reverend, Blackat, Hagstrom, Peerless, Carvin, Guild, Cole Clark, Seagull, Meloduende, Suhr, Nik Huber, Feline, Ozark, Burns, Ruokangas, and Eko.
There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]
To quote the super-helpful legendarytones.com, "The Hiwatt DR103 is notably louder and can also run much cleaner than 100-watt Marshalls when needed, and they also have tremendous headroom available. Playing a Hiwatt at a loud volume is, well, an experience." The site adds, "The Hiwatt DR103 design is based around the use of four EL-34 power tubes and four 12AX7 preamp tubes. The transformers are set up so that the amp can be used with various line voltages around the world and speaker impedance can also be set to 4, 8, or 16 ohms with two speaker outputs wired in parallel."
{ "thumbImageID": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000", "defaultDisplayName": "Fender Player Stratocaster Pau Ferro Fingerboard Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000219698", "price": "674.99", "regularPrice": "674.99", "msrpPrice": "675.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black-1500000219698.gc", "skuImageId": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Black/L21520000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Red", "sku": "sku:site51500000219699", "price": "674.99", "regularPrice": "674.99", "msrpPrice": "675.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red-1500000219699.gc", "skuImageId": "Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red/L21520000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Player-Stratocaster-Pau-Ferro-Fingerboard-Left-Handed-Electric-Guitar-Sonic-Red/L21520000002000-00-60x60.jpg", "imgAlt": "" } ] }
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: ibanez","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop by brand: ibanez","eVar3":"shop","prop2":"[gc] shop by brand: ibanez","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop by brand: ibanez","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[gc] shop by brand: ibanez","prop6":"[gc] shop by brand: ibanez","prop3":"[gc] shop by brand: ibanez","prop4":"[gc] shop by brand: ibanez","eVar1":"ibanez","prop9":"2875","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] site section","prop8":"ibanez"}
One of the factors bassists keep in mind when selecting a combo amp or an amp head is the amount of "headroom" that the amplifier will provide them, given their intended performance venue and music genre. "Headroom" refers to the amount by which the signal-handling capabilities of an audio system exceed a designated nominal level.[20] Headroom can be thought of as a safety zone allowing transient audio peaks to exceed the nominal level without damaging the system or the audio signal, e.g., via clipping. In loud music genres and in genres where bassists seek a clean, clear bass tone, bassists seek to avoid power amplifier clipping, so they typically choose amplifiers which provide enough headroom to avoid power amp clipping. Headroom has been defined as a "...safety zone or wiggle room".[21]"[H]aving enough headroom is essential for solid-state equipment like bass amplifiers and power amplifiers. If you lack this, you can expect a harsh mid range tone, a lack of dynamics and possibly blown speakers".[21] Having enough headroom is also important for bassists seeking to retain a "clean" sound even in loud, high-volume performance settings.
I purchased one online a little over a year ago. looks great and sounds even better. I had a serious problem with it staying in tune, changed the tuners and nut, it helped but not to the point where it needed to be. Too ban because this guitar plays and sounds great. I sold it for half the purchase price to someone not so concerned about sounding so in tune.

The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
By the time this Blink-182 hit was recorded, the majority of Enema of the State had already been written. Tom DeLonge wanted to add one more song to the album that was simple, and radio friendly so he got to work. The lyric “She left me roses by the stairs” came about when DeLonge’s girlfriend at the time left him roses on the stairs, and the singer found them late one night after recording. The “na na na” section was also inspired by the next band.
When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.
Before I start, I want to mention a few things about this particular guitar. It looks and (potentially) sounds great. The neck plays well too, but it has some tuning problems and buzzes a bit more than I’d like. The tuning problems are coming from two areas. Firstly the nut slots are too tight, made evident by the strings making a pinging noise when they are tuned up or down. This means that it is difficult to fine tune, as the string’s pitch tends to “jump” up or down. The second reason for the tuning issues is that the intonation is way out. By that I mean that the saddles’ forwards/backwards positions are not set up well, and so when the open strings are correctly tuned, and we then play up the neck, it suddenly seems out of tune again.
If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.
It is entirely possible with most guitars. Very rarely will there be a time you will be unable to achieve that same sound with a decent amp. So make sure you do get a quality amp─it doesn't have to be extremely pricey, just good enough. Always make sure your guitar has multiple pickups if you are planning to play different styles of music; it allows for more perfect fine-tuning.
This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.
It comes with a single coil pickup in the neck position and a humbucker at the bridge - switching between the two pickups gives you both a strat like sound and an LP like tone. The pickup selector is 3-way so you can play with both pickups at the same time. It sports a shorter 24.75" scale length and smaller 12" radius on the rosewood topped mahogany bolt-on neck with a 1.6875" nut width making it very playable and accessible to guitarists of all levels of experience. Many customer reviews suggest the Empire HG feels and plays like a more expensive guitar.
Ibanez, a guitar and bass manufacturer, came to prominence as a result of music legends like Steve Vai and Joe Satriani using this brand. These guitars provide an exceptionally uniform neck action, a highly versatile tone, and top of the range pick up configuration. One of the main reasons that this brand gained popularity was the effective tone from cheap and mass-produced instruments. Heavy music is what they excel in, and metal enthusiasts have been loving Ibanez for decades now. They manufacture guitars for every style and genre. The most iconic model is the RG, but S series is also loved by all. They are also the makers of the 7-string guitar, with the first model Universe being made in the year 1990.
UPDATE 10/21: The good news first - I'm still absolutely loving the game and steadily improving. I'm only able to play about one to two hours a day, but even though that's all the time I'm able to put in, I'm already to the point of being able to play along with a song. But (here comes the downside), with my improvement audio lag has become a real issue. Before I was so horrible that I couldn't hit the right notes at all, let alone on time, so it didn't make much difference. But now that I've improved, it's a problem. To be fair, they warn you about this in the form of a pamphlet inside the game box, so it wasn't out of nowhere. I was just hoping that since I wasn't using HDMI, the lag wouldn't be too horrible. Wrong.
Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods....with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.
With electric specifically, it's important to ask what genre's of music do you want to play and who are your influences. A humbucker pick-up found in Les Pauls and SGs sound MUCH different than single-coils found in Stratocasters and Telecasters. If you like the sound of your guitar heroes, chances are you will like playing through similar gear. Again, go with my BUDGET, FEEL and SOUND trifecta!

I want to focus on acoustic guitar but some electric is alright. Mainly I want to build up a repertoire of songs that MOST people will know if heard and be able to sing a long. Currently I know very few songs such as this but I have been playing off and on for years. Any really popular (old or newish is fine) songs that are not impossible to play would be great. Thanks!


A direct user interface can give far more musically rewarding results than dozens of parameters, menus and alpha dials. Often, even a panel of knobs isn't anywhere near as natural to play as, say, a Korg Kaoss Pad. Here's something Kaoss Pad 3 owners can try at home: choose effect DL2 (Smooth Delay) in which the pad controls delay time on the X-axis and depth on the Y-axis. Next route your favourite solo patch through it and set the FX depth to about 12 o'clock. Solo wildly whilst simultaneously stroking the top right-hand corner of the Kaoss Pad with short, circular motions. With practice, you should be able to produce delicate pitch sweeps as the delay shifts in time. As you control depth by vertical motion, practise diagonal upwards sweeps followed by vertical downward ones to smoothly dampen the effect. Hey, it takes years to master the violin, so a few evenings spent waggling your finger over flashing LEDs shouldn't be too arduous. Next try the same technique with lush solo pads: simple yet devastatingly effective! Paul Nagle
Learning the notes on your guitar fretboard is one of the most important things you can do to advance your guitar playing skills. Knowing this information opens up an enormous amount of possibilities and can greatly help ease the learning curve for future guitar exercises. From scales, to soloing, to chord positions / progressions, knowing where each guitar note without having to think about it will put you well ahead of other guitarists who have not mastered this yet. This guide will give you some background information regarding how the notes on your guitar fretboard are laid out and of
Another application of a fuzz pedal is available when the user has control over the the amount of feedback signal routed back into the transistor loop while the pedal is engaged. By configuring the feedback to more sensitive levels, the pedal will feed back into itself causing oscillation*. As the pedal oscillates, certain frequencies will be produced, causing a singing sustained note without the guitarist playing anything at all. The player can consequently play over the note produced to cancel out the feedback loop, but once the player stops the pedal will feed back into itself producing the configured signal once again.

: I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
“Well, the legends didn’t use pedals.” Whenever somebody says something like this, and you ask them to whom they are referring, they’re often misinformed and factually wrong. “Jimmy Page”. Uh, ever see him use a Tone Bender Mk II? “Jimi Hendrix.” Please feel free to complete a Harry Potter novel while I finish laughing. “Stevie Ray Vaughan.” Ibanez and Maxon should retire a green Tube Screamer colored banner with his name hanging from their company rafters. This list goes on and on. Yes, there are lots of cool dudes back in the old times who didn’t use pedals to help them create some classic tones, but once they had the chance, they chose to.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
Additional mics can be used to capture different tones from the amp and/or some ambient room sound. When recording open-backed cabinets, great results can be obtained by using a second mic at the rear of the cab. When this technique is employed, it’s wise to invert the phase on one of the channels. To create a sound that’s larger than life, try recording a part with close and distant mics and pan the two channels, then repeat the process, panning the channels in the opposite direction. Two close mics pointing at different parts of the speaker – one dead-centre and the other towards the far edge – will pick up the full range of the speaker’s tone.
With such a vast array of effects available, it can be hard to know where to start. One good way is to find out which effects your favorite players use. Artist interviews can be a great source of such information. Additionally, most players are happy to discuss their gear with fellow musicians. Talk to other guitar players you know, or chat up the guitarists or bassists at the local club before or after their sets.
Anyway, as the Strat-style guitars have three pickups, the selector switch works like this: all the way to the left (relative to the Jimi pic) would limit the guitar’s output to the sound of the neck pickup. One position to the right will blend the neck pickup with the middle pickup. Put the switch in the middle, and you’ll get just the sound of the middle pickup, as you may have guessed. The next position will blend the middle and bridge pickups, and all the way to the right, it’s all bridge pickup.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]

Unlike a piano or the voices of a choir, the guitar (in standard tuning) has difficulty playing the chords as stacks of thirds, which would require the left hand to span too many frets,[40] particularly for dominant seventh chords, as explained below. If in a particular tuning chords cannot be played in closed position, then they often can be played in open position; similarly, if in a particular tuning chords cannot be played in root position, they can often be played in inverted positions. A chord is inverted when the bass note is not the root note. Additional chords can be generated with drop-2 (or drop-3) voicing, which are discussed for standard tuning's implementation of dominant seventh chords (below).
The L-00 carries over the airy nasal tone and midrange emphasis of the original, making it great for tasty slide and classic rock riffs. Your favorite blues licks will also have more oomph when played through this blues box. For something so small, this parlor guitar can compete with standard size acoustics in terms of volume. Its solid sitka spruce top and solid mahogany back and sides work together well to give this seemingly diminutive instrument great clarity and good low end.

Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
Next to the great sounds and looks, the most noticeable thing about Seagull guitars is the incredibly reasonable prices. With Seagull, you get a quality guitar made from superior woods and materials for a lot less than it seems like it ought to cost. The Performer CW Flame Maple is definitely one of the best acoustic-electric guitars under $1000 out there.
Though some sophisticated processors combine pitch detection with pitch-shifting, to generate musically correct harmonies in user-defined keys, simple pitch-shifters always change the pitch by the same number of cents or semitones. In musical terms, that means that only the octaves, parallel fourths and fifths are very useful. Other intervals tend to sound discordant, as they don't follow the intervals dictated by typical musical scales.
A Vibe or Univibe pedal reproduces the sound of a rotating speaker by synchronizing volume oscillation, frequency-specific volume oscillation, vibrato (pitch wavering), phase shifting, and chorusing in relation to a non-rotating speaker. The modulation speed can be ramped up or down, with separate speeds for the bass and treble frequencies, to simulate the sound of a rotating bass speaker and a rotating horn. This effect is simultaneously a volume-oriented effect, an equalization-oriented effect, and a time-based effect. Furthermore, this effect is typically related to chorus. Some vibe pedals also include an overdrive effect, which allows the performer to add "tube"-style distortion. This effect is the most closely related to a rotary speaker. Some Vibe-only pedals include:

"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
Hmm… you still want to buy an electric guitar first up? Okay, but again spend extra money on a guitar that plays well, will keep its value and feels perfect in your hands. In other words, don’t focus too much on paying for extras like custom pick-ups, locking nuts and electronics you don’t need just yet. At the moment it’s all about fingers and hands, not foot-pedals.
For those who like that 1950s style Gretsch sound, you’ll appreciate the Gretsch Dual-Coil humbuckers which can go from glass like cleans to smooth low growls to all out riff worthy dirt when you add some distortion to your amp. The single cutaway design and maple neck with gloss polyester finish make it extremely comfortable to play too. A guitar beginners and professional musicians alike, can enjoy.

Of music written originally for guitar, the earliest important composers are from the classical period and include Fernando Sor (b. Spain 1778) and Mauro Giuliani (b. Italy 1781), both of whom wrote in a style strongly influenced by Viennese classicism. In the 19th century guitar composers such as Johann Kaspar Mertz (b. Slovakia, Austria 1806) were strongly influenced by the dominance of the piano. Not until the end of the nineteenth century did the guitar begin to establish its own unique identity. Francisco Tárrega (b. Spain 1852) was central to this, sometimes incorporating stylized aspects of flamenco's Moorish influences into his romantic miniatures. This was part of late 19th century mainstream European musical nationalism. Albéniz and Granados were central to this movement; their evocation of the guitar was so successful that their compositions have been absorbed into standard guitar repertoire.
If you're in need of some assistance, you've come to the right place. At BestReviews, our goal is to help you find the perfect products to fit your individual requirements. We test items in our labs, gather feedback from existing customers, and consult experts. The result? Fair and thorough reviews that help you cut through the jargon. Read on for our full guide to electric guitars to learn all you need to know to pick the right one for your next jam session.
If you already have an electric guitar and you're looking for replacement strings, carry cases, guitar stands, or other accessories, you've come to the right place. Amazon.com offers a selection of tools and accessories designed for players of every age and skill level, from beginners to pros. Look for amplifiers, cables, and microphones too—you can enjoy great selection right here online, with no need to make a special trip to the guitar shop.
In recent years, convolution reverbs have become both affordable and commonplace. These differ from synthetic reverbs insomuch as they work from impulse responses (or IRs), recorded in real spaces to faithfully recreate the ambience at the microphone's position when the IR was made. Sometimes these are referred to as sampling reverbs but there's no sampling involved as such, even though the process seems akin to sampling the sonic signature of a room, hall or other space.
Anytime you hear a screaming or raunchy sounding harmonic by way of loads of gain come jumping out of your speakers, it’s likely a result of pinch harmonics. Pinch harmonics follow the same basic idea of harmonics, except this time the contact is made with the skin of your pick hand thumb right after picking a note. Where you do this determines the pitch of the harmonic.
• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.
What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…
Finally, according to Longworth, the earliest examples of these instruments had laminated bodies made of maple, rosewood and mahogany. A second series was made with a combination of maple and rosewood. A third series was made with maple and walnut. The #1034 EM-18 shown here appears to be very early yet has maple and rosewood, so it’s not clear if materials are indicators of chronology or simply the vicissitudes of fate (or the woodshop, as the case may be).
For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.
I work out of my home shop in Idaho Falls, Idaho. I do repairs for clients and guitar shops all over the United States. I’d love to help you repair or restore your guitar. Repair prices are based on a rate of $60 per hour. These prices apply to guitars in otherwise good working order. Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss. Consultations are always free.
Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.

For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
Here’s one more metal marauder that is worth mentioning. Schecter Hellraiser C-1 comes packing a lot of output and a tone that handles all kinds of distortions naturally. We are talking mahogany body combined with a set of EMG 81/89s, which should be enough to spark your imagination. Plugged into a Messa/Boogie Dual Recto’s red channel, this puppy simple felt at home

Following on from the previous article, we look at the grand-daddy of all pickup selectors: the 4-pole super-switch. The possibilities with this switch are endless, and we scratch the surface by coming up with a wiring scheme for an HSH guitar that auto-splits the humbuckers in the 2 and 4 positions, and combines both humbuckers in the middle position.
I got this lyle acoustic (w-400) for $40 at a yard sale - it is THE MOST INCREDIBLE GUITAR you could ever ask for - looks just like a martin d-18 - solid spruce top - sweet figured mahog b&s's - back of headstock even has the valute like a martin - just kicks my buddies real d-18 to pieces - he's so jealous - if you get the chance to own one don't pass it up - it will probably be too cheap to pass up and you WILL regret it later (like I have been kicking my own ass for decades for passing up a 60's Gibson byrdland for $400)
Gotta say a tele has to be the hardest but most rewarding to play. If you make a mistake, you will definitely hear it, but it just helps you're playing get more clean. Les pauls are a lot easier with the shorter scale length and forgiving pickups. Haven't played any metal guitars but I figure it has a lot to do with their setup that makes it sound so easy. You can do just about anything with the tremolo arm into a van halen kind of setup and it'll sound cool. Or you can whack one off with your guitar like steve vai
My granddaughter really liked this book. I know it was used but the CD and the wall chart were missing. I wish that would have been noted in the comments. Some of the other book sellers noted that one or the other of these were missing so I didn't order from them. Nothing was noted in the comments on this. My granddaughter was happy with the book and wanted to keep it.
Other ways to reduce feedback include: playing with the bass amp's speaker cabinets in front of, rather than behind, the instrument; reducing the onstage volume; moving the bass away from other loud instruments, such as the drum kit (low toms can trigger feedback on some basses) or the rhythm guitar player's amp); signal phase reversing; using a parametric equalizer or "notch filter" EQ to turn down the frequency that is feeding back; or using "feedback eliminators", which are basically automatic notch filters that find and turn down the frequency that is "howling". Some other ways to reduce feedback are to use a plywood laminate bass rather than a carved wood bass, use a solid - body electric upright bass and/or use magnetic or optical pickups. Many of the methods used to reduce feedback (notch filters, filling the f-holes with foam) have effects on the tone of the instrument. However, these drawbacks need to be considered against the significant problems for the audience's experience caused by unwanted feedback.
As you'd expect, the most important decision to make with multi effects pedals is the choice of which effects, specifically, you want in them. The Electro-Harmonix Epitome Multi-Effects Guitar Pedal, for instance, is a veritable buffet of effects including flanger, chorus, reverb, pitch-shifting and more. But if you're looking for an expression pedal, you'll probably be more interested in a unit like the Vox StompLab IIG Modeling Guitar Effect Processor, which has one of those built in. Both of these multi effects pedals are top sellers, which comes as no surprise considering the versatility they bring to the table.
this is a norma guitar. i think from the late 1960's to maybe 1970estate find. has scratches in some placeshas two on and off button in white they push in real easy. theres a rhythm, and solo button theres two knobs bellow.theres only 3 strings on it. theres three missing part off the r is missing on the norma. i have no equipment to test it to see how it sounds it seems ok when i play with what strings i have on it.please check out all the pictures for better detail selling as is no returns... more
Electronics installs are one of my favorite jobs here at the shop and this project was one of the funnest.  Installing a Clapton pre-amp is more then just a quick wiring job because of the surface mount board.  The board needs to be routed into the body underneath the pickguard.  Setting up the router is the most time consuming part of this job and once the routing in complete the actual wiring takes only a few minutes.  The guitar was then topped off with a fret level and setup. -Evan
Les Paul DID NOT design the guitar that bears his name! Ted McCarty and his team at Gibson came up with it and took it to Les at Delaware Water Gap where he was living and recording (no planes flying over). Ted showed it to Les and he said, "They're getting too close to us, Mary, we better join 'em." The only contribution that Les made to the original guitar was that lousy wrap around the bottom trapeze tailpiece that was quickly dumped...
When you've put your blood, sweat and tears into developing your talent, you want your music to sound amazing. And with the proper recording gear, you can ensure your sound is captured exactly how you intended. From audio interfaces to studio monitors to extremely powerful subwoofers, this section's wide range of recording gear offers up plenty of examples of ways to make your recordings better than ever. The right audio/video arrangement can take the stress out of recording, giving you more time and energy to concentrate on what's most important - your music. If you're unsure where to start the search for recording gear, checking out some of the top-rated and best-selling products is definitely the way to go. Want to attach your mic directly to your PC or Mac? The Blue Icicle performs dual functions as an XLR to USB adapter and a studio-quality microphone preamp. Offering a quick and easy way to perform digital and audio recording, this handy tool is a must for every musician's gear bag. Maybe you're in the market for a studio monitor? If that's the case, the Mackie MR8 mk3 8" 2-Way Powered Studio Monitor is a fantastic choice. Built with a clear focus on accuracy, this low-profile studio monitor is perfect for musicians who really want to capture the full character of their music. This section is also home to an assortment of GoPro video cameras. With a GoPro, you can record your set firsthand from the stage, giving your fans a unique "view from the top." Take a look at the GoPro HERO+ LCD for example - this camera captures your world in stunning HD video. It's rugged, waterproof and built into its own protective case - exactly what you need to record those high-energy shows. Another fantastic GoPro option is the HERO4 Session. Smaller and lighter than any other GoPro currently on the market, the HERO4 Session captures 1080p60 video and 8MP photos in a simple design that's so compact it can go just about anywhere. This is just a quick sampling of what's available when it comes to recording gear. There are lots more products to consider, so spend some time browsing through them - you never know when the right piece of equipment is going to leap off the page and into your professional setup.

Guitar amp modeling devices and software can reproduce various guitar-specific distortion qualities that are associated with a range of popular "stomp box" pedals and amplifiers. Amp modeling devices typically use digital signal processing to recreate the sound of plugging into analogue pedals and overdriven valve amplifiers. The most sophisticated devices allow the user to customize the simulated results of using different preamp, power-tube, speaker distortion, speaker cabinet, and microphone placement combinations. For example, a guitarist using a small amp modeling pedal could simulate the sound of plugging their electric guitar into a heavy vintage valve amplifier and a stack of 8 X 10" speaker cabinets.

There’s a bolt-on thin U-shaped maple neck, with a rosewood fretboard, and 24 extra-jumbo frets, which makes fast playing and string bending a breeze. As we highlight in our full review, the EC-10 is voiced by two ESP-designed passive LH-100 humbuckers at the neck and bridge positions, which are loud enough to cope with rock and metal lead playing, although articulate and warm when playing without distortion.
This guitar follows after the tried and tested formula of old Stratocaster design, from the double cutaway alder body to the bolt-on maple neck, down to its triple single coil pickup configuration. The scale length follows after traditional builds at 25.5", while the neck profile (modern C) and narrower nut width of 1.65" makes this guitar viable for modern players. While it doesn't have vintage voiced pickups, the default pickups are not so bad either, and will give you the distinctive Strat tone that almost everybody loves.
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back.

Mic placement is pretty crucial. You can get a million different EQ responses depending on where you throw the mic in front of the cab. I personally have the best luck - or at least I think so - when I back the mic off a little bit. I know a lot of engineers throw it right on the grille to get the bass boost, the proximity effect and all that garbage, but I find that if I back it up about six inches, I get a more balanced EQ curve.


However, unlike a boost pedal, the overdrive effect is not dependent on the amplifier to have a distorted sound. The overdrive pedal will internally boost the input signal so much that the top of the signal wave will be forced to naturally shrink itself. This is called soft clipping and it simulates amplifier like clipping as though an amplifier was being overly driven, hence the name overdrive. The distortion pedal will also boost the input signal but will then add resistors within the circuitry to not just shrink or soft clip the wave form but completely flatten the wave peaks. This is called hard clipping. For more understanding on the differences between soft clipping and hard clipping see the illustration below.

Raising the speaker cabinet off the ground varies the path length of reflected sound reaching the microphone, which can usefully alter the sound in some cases.One way to capture the sound of a large stack, unsurprisingly, is to set up the stack in a large room, play loud and put the mic several feet away so that the combination of all the speakers can be recorded, along with any floor reflections and the subtle filtering effects these may cause. Using this method, the mic 'hears' the guitar sound much as an audience would. Nevertheless, the most common approach is to close-mike the amp with the mic set up very close to the speaker grille and pointed directly at the centre of the speaker cone — where the cabinet has multiple speakers, it's traditional to deliberate over which one sounds best and then mic that one!). Moving the mic to one side produces a less toppy sound, so before reaching for the EQ knob you should try moving the mic.
X-Series: Back and sides constructed from compressed wood fibers (high-pressure laminate or “HPL“) and solid Sitka spruce or HPL top. Due to this construction these guitars are more environmentally-friendly.[citation needed] Models include: DX1, DX1-R, DXM, DCX1E, DCX1R3, 000CXE Black, and 000X1. Some earlier models used ‘Ebonite’ (black Micarta) fretboards, later models use koa or striped ebony. Necks on all models are constructed from Stratabond, a laminated wood product used for decades in gun stocks and hunting bows. Some of the more recent models are made in Mexico.
Effects can inspire you with new creative ideas, or just help you sound like your musical inspirations, go for it. I would urge you to consider a multi-effects unit like a Digitech RP series, or Line6 PodHD series. They can provide you with many options to try before you figure out exactly what you want. Many units can be had pretty cheap used, and as a bonus, most will act as a usb interface, and let you record your playing (for better or worse) to computer. – Michael Cook Apr 29 '13 at 21:39
Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.
×