This type of chip delivers a beautifully coloured representation of your sound. It may not be the most accurate and you are limited in the number of repeats and delay time.These are not to be confused with Tape Echo which was used for a long time in the world’s largest studios. No, these pedals were made out of necessity to take a form of delay on the road easily.
Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.
An "effects chain" or "signal chain" is formed by connecting two or more stompboxes. Effect chains are typically created between the guitar and the amp or between the preamplifier ("preamp") and the power amp. When a pedal is off or inactive, the electric audio signal coming into the pedal diverts onto a bypass, an unaltered "dry" signal that continues on to other effects down the chain. In this way, a musician can combine effects within a chain in a variety of ways without having to reconnect boxes during a performance.[10] A "controller" or "effects management system" lets the musician create multiple effect chains, so they can select one or several chains by tapping a single switch. The switches are usually organized in a row or a simple grid.[11]
A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.
What you need is some basic knowledge about the physics of audio (most of which you can learn by dropping a pebble in a puddle of water), and some pretty basic and inexpensive equipment. This is especially true for recording the electric guitar. Trust me--if it were brain surgery, I would have become a brain surgeon and made my mother a much happier woman. And while I have the opportunity . . . for all you kids who want to grow up to be recording engineers--don't do it. Become brain surgeons. They make a lot more money, drive nicer cars, and never have to worry about where their next gig is coming from.

Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.

There are more expensive versions of the Alex Lifeson signature available, but the SE that we’ve chosen has a really nice balance of price and specification. This is a firmly mid-range guitar, and is really good value at that. It’s a slightly thinner body style, but with PRS’ nice traditional acoustic hybrid shape, and comes with all of the high quality hardware and electronics that you’d expect from PRS.
The Effect:Reverb pedals have remained a staple pick in each guitarist’s arsenal in order to provide that extra sound refinement and enhancement when necessary. It may be tricky, learning to apply the right amount of Reverb, as too little may go unnoticed, and too much may sound silly, yet finding that sweet spot is definitely thrilling and satisfying. Great option for every beginner (or a so called must have guitar pedal) is the Boss FRV-1 63 Fender Reverb Pedal. If you want to dig deeper into the reverb effects, check out our dedicated article, the plethora of reverb pedals for you to choose from will surprise you.
Another well established brand FMIC i.e. fender musical instrument company is widely recognized for manufacturing eminent guitars of superlative quality and texture. In India, the customers are satisfied form its products and won over millions of heart by providing brilliant guitar brands like FA – 100.So why waiting more? Quick make your purchase and enjoy the lovely music tone.
Serious quality, 20 foot Guitar / Instrument connection cable. I have sold these for years. They come with a lifetime warranty, that is very rarely needed! Double  (redundant) 20 gauge, center conductors almost makes impossible ever having one go "dead" in the middle of a show! 100% Braided copper shield (not spiral wrapped like most cheaper cables) for silent / noise free operation (means less chance of picking up a radio station or wireless mic during your performance). Super-quality, Neutrik, all metal 280, 1/4" ends / plugs that are shrink wrapped for extra strain relief. The internals are hot-glued between to reduce internal flexion for even greater longevity. Built by the largest manufactured cable company in the US. Very rugged and durable, yet flexible jacket. These are not the cheap cables, nor are they built like most cables. Cheaply!
The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!
Consider so-called “vintage” or “’50s-style” wiring, in which the tone pot and cap are connected to the middle lug of the volume pot rather than the usual third lug. Given the sheer number of posts the topic has amassed on guitar-geek sites, you’d think it was an earth-shaking option. Yeah, it’s a cool mod that I happen to dig, but really, the sonic benefit is modest: just a bit less loss of brightness when you dial down the volume.
As for necks, the majority of guitars will have either a maple or mahogany neck, with a rosewood, maple or ebony fretboard. Again, there’s no right or wrong, and a neck wood is never going to sway your decision. But you should choose something that feels smooth and comfortable to play. There are a variety of shapes and profiles, and what you go for will depend on personal preference and playing style. For example, a modern C-shaped neck is always a safe choice as the majority of guitarists will feel comfortable using it, while a thin U-shape is great for faster players (think punk rock and metal).
I took lessons with him when i was 8 years old. I stopped taking lessons when i was 12 years old. In those four years i have learned so much about guitar in such a little time. Patrick is an amazing teacher and by the time i left his teaching, i joined 4 bands and played at the whiskey twice, the house of blues four times, and the grove once. All amazing experiences and it all started from Patrick. I am 16 now and i will never forget what he has done for me. If you are thinking about eventually taking on guitar at all, Pat is your man.
Unfortunately, it appears it is no longer possible to grab a Standard MIM Telecaster for under $500. Still, the Standard Telecaster remains a solid option when it comes to reasonably priced guitars, and it is a great alternative to the American Tele. However, if this increase doesn't set well with you, and you aren't digging the Modern Player Telecaster Plus, I suggest checking out what Squier has to offer.
Practical - These sessions will involve exercising your fingers. For example, fingering chords would fall under this category, as the focus will be on getting physically comfortable with positioning and changing between chords, or experimenting with new strumming patterns. With lead guitar, the physical side covers techniques such as legato (you'll learn what that means soon enough!), string bends, speed drills and anything that involves the physical side of playing guitar.

Those who appreciate a more vintage design will love the Schecter S-II CUSTOM. It’s an original design which borrowed a lot of ideas from Gibson’s legendary SG series. Pickups are also in line with the overall theme, and they sound pretty great. There’s balance in the tone, the kind you don’t really expect to get from a Schecter. It definitely took me by surprise, a very pleasant surprise.
Once everything is assembled, check through the instructions one last time for any additional notes on connections, power etc (don’t waste all your hard work by blowing up the board with the wrong power supply). Then plug in your pedal and give it a try. There’s a good chance it will work first time. If not, go through the instructions again step by step and look to see where the problem might be. Missed, incorrect, or reversed components are the most common causes and can be diagnosed just by checking each step carefully.
Add to this the physical attributes and ergonomics of a .strandberg* that work together to relax muscles, joints and tendons when playing. Some players are freaked out by the low weight, others by the lack of headstock and some have a natural playing position that places their thumb right at the edge of the EndurNeck™ and is not comfortable at all.
This is probably the most iconic guitar effect ever – from Slash to Jimi Hendrix to Mark Tremonti to SRV, the list of players who use wah pedals is almost never ending. Originally created to emulate the muted sound possible on a trumpet, it quickly became an iconic effect in its own right. The sound is pretty self-explanatory – rock your foot back and forth of the pedal to shift the EQ from bass heavy to treble heavy and you’ll get a nice “wah wah” as you play.

The auctions continue on our eBay store, including last remaining production samples of several models, and other unique instruments, including made in Japan JP models, Triturador basses, Tony Campos Signature Tremor basses, acoustic guitars and accessories. Check out the current listings, there will be new items posted every week:
Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.
Were its fate left to the Electric Storms, Ovation may never have made it out of the ’60s. However, the breakthrough occurred when the company picked up the endorsement of pop star Glen Campbell, who began his career as a session guitarist and folk singer, at one point touring behind Ricky Nelson. In ’65 he was a member of the Beach Boys, but by the late ’60s he had broken through to be an enormously popular balladeer with country-tinged hits like “By the Time I Get to Phoenix” and “Wichita Lineman.”
Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end and at what pitch they lie. You can modify each note and thereby influence direc...
{ "thumbImageID": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White/H11149000001000", "defaultDisplayName": "Rogue LX205B 5-String Series III Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pearl White", "sku": "sku:site51278002525864", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White-1278002525864.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-White/H11149000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Blue", "sku": "sku:site51278002525867", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Metallic-Blue-1278002525867.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Metallic-Blue/H11149000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51278002525866", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Candy-Apple-Red-1278002525866.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Candy-Apple-Red/H11149000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pearl Black", "sku": "sku:site51278002525878", "price": "109.99", "regularPrice": "159.99", "msrpPrice": "319.99", "priceVisibility": "1", "skuUrl": "/Rogue/LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-Black-1278002525878.gc", "skuImageId": "LX205B-5-String-Series-III-Electric-Bass-Guitar-Pearl-Black/H11149000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Half a step up from standard tuning. Used in most of Johnny Cash's music, for "Love Buzz" on Nirvana's Bleach album - apparently by mistake (according to Come As You Are - Michael Azerrad), 3 Doors Down on "Here Without You" (a capo was probably used), Vektor, Soundgarden's "Black Hole Sun" (The low E string was tuned to Eb/D# for a drop Eb/D# tuning), Nickelback on their song "When We Stand Together", Burzum on his first 3 albums, John Fedowitz in his solo project "Ceremony", and Joe Jackson on "Got the Time".
The Effect: Vocal harmonizer pedals are among the most powerful tools you can have as a singing guitar player. An average vocal harmonizer will use the input from your guitar, mix it with your microphone’s signal, and produce a harmonic background of your voice that is in tune with the chords you’re playing. More advanced models like TC Helicon Play Acoustic, are capable of doing much more than that. We are looking at complex processors that offer multiple effects, active vocal equalization and so much more. With that said, vocal equalizers come in a variety of flavors. Some are optimized for solo performers, while others are much more relaxed. The great thing about modern vocal harmonizers is that tracking is no longer that much of an issue. It is fair to say that most models you can find on the market right now, will get you pretty solid core performance.
When the Fender company invented the first widely produced electric bass guitar (the Fender Precision Bass) they also developed a bass amplifier, the Fender Bassman, first produced in 1952. This was a 26-watt tube amplifier with a single 15" speaker. In 1954, the Bassman was redesigned to use four 10" speakers. This speaker cabinet was an open-back design; as such, it had poor low-frequency efficiency and was prone to blowing speakers when used for bass because of the lack of damping. Somewhat ironically, it became very popular as an electric guitar amplifier. The circuit design also underwent repeated modifications. The "5F6A" circuit introduced in 1958 is regarded as a classic amplifier design and was copied by many other manufacturers, such as Marshall.
I'm not sure if it's been made clear or not yet, but the imported firewood that had a Kay brand name on it in the seventies bears no relation to the products of the the Kay Co. of Chicago USA. It's not all plywood either; they had a range of total crap to not-so-crappy models. I never much liked their p.u.s or their necks. This is a good body (late 40's K-44) with a better (Harmony!) neck.
Many compressor pedals are often also marketed as "sustainer pedals". As a note is sustained, it loses energy and volume due to diminishing vibration in the string. The compressor pedal boosts its electrical signal to the specified dynamic range, slightly prolonging the duration of the note.[92] This, combined with heavy distortion and the close proximity of the guitar and the speaker cabinet, can lead to infinite sustain at higher volumes.
Despite what the Peate copy says, these instruments are not Dobros, but rather Supros. The guitars and mandolin shown in the Peate catalog are identified as being “The New Dobro Electric Guitars,” part of National Dobro electric guitars. However, the No. 1 Hawaiian shown is clearly the Supro frying pan (recall that the Hawaiian in ’35 was the fancier Dobro), and the No. 2 Spanish Guitar and No. 3 Mandolin are clearly labeled “Supro.”
One last note concerning the use of compression: Be careful. Compression occurs naturally in overdriven tube amplifiers, and overly-compressed clean settings or direct guitar tracks can sound harsh, with an exaggerated picking sound. We hope that having read this article, you'll approach the process of recording the electric guitar with a new insight and fresh ears, and wish you the best in your quest for the ultimate tone.
{"product":{"id":"114488369","stock":"instock","price":"799.99","name":"Legacy Solid Body Electric Guitar","download":false,"sku_id":"114488369","checksum":"402390681023","rep_id":"site5114488369","displayId":"114488369","sku_display_id":"114488369","sku_rep_id":"site5114488369","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
The Vox Show Room shows the classic amps behind the British Explosion of sound in the 60's. VOX, at one time was one of the largest musical instrument producers in the world and their products were utilized by almost every major music group during the nineteen sixties. From The Shadows to The Beatles to U2, VOX is the "voice" of generations of musicians worldwide.
Here, in this mini guide to acoustic guitar body types, we’ll aim to show you some of the key differences in size, shape, sound and suitability between the major variations of guitar. We’ll look at the history of some of the better known body types, and make recommendations according to the sound you’re going for and the style in which you play. So whether you’re a wispy finger-picker or a hearty strummer, we’ll explain some of the more intricate details of acoustic guitar body shapes.
The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.

Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.

More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.

-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
I’m sorry you were disappointed in the videos. I guess your definition of lesson and mine differ. I would define lesson as something that teaches the viewer a new skill or provides them with information they didn’t already possess. I certainly learned a lot from Clapton talking about how he achieved that great tone, from Angus Young explaining his style, and from Slash explaining how he plays American Man.

The body is pre-drilled and crafted from basswood, while the maple neck is meant to be glued into the neck joint, something that requires a bit of care and precision. Because of its hollow body design, installing electronics can be a bit of a challenge, but very doable as attested to by reviews. Note that wood is raw and unfinished, so you'll need a bit more sanding and patching before you paint on it.
Tags: Adrian Belew, All Time, Arto Lindsay, bert jansch, bob mould, built to spill, Carcass, Carrie Brownstein, chic, dave navarro, David Bowie, death, dillinger escape plan, earth, Eugene Chadbourne, Fred, Fred Frith, fugazi, james blackshaw, Janes Addiction, Jerry Harrison, John McLaughlin, Johnny Thunders, Josh Homme, Joy Division, Keiji Haino, King Sunny Ade, living colour, Lydia Lunch, Marc Ribot, marnie stern, Mayhem, MC5, Meat Puppets, Mick Ronson, Morbid Angel, morrissey, Napalm Death, Nels Cline, New Order, nile rodgers, Orthrelm/Krallice, Pantera, Patti Smith Group, pavement, pearl jam, PS I Love You, rage against the machine, Red Hot Chili Peppers, Rhys Chatham, Robbie Basho, Rufus, screaming females, Shuggie Otis, Sightings, Skrillex, sleater-kinney, Slint, Smashing Pumpkins, Soundgarden, st vincent, stephen malkmus, Syd Barrett, The Birthday Party, The Breeders, the Jesus Lizard, The Magic Band, the slits, Throwing Muses, Tinariwen, Wayne Kramer, wild flag, Wino, Wipers, Yeah Yeah Yeahs, Yo La Tengo
Now, the body size isn’t the only thing to think about. There’s also whether or not there’s a cutaway, and how this is implemented. A cutaway makes it easier for you to access the higher frets, because you can place your hand right next to them. Naturally this will reduce some of the resonance because there’s less body beside the neck, but it’s a tradeoff that a great many guitarists are happy to make if they want to be able to play those higher frets well.

Distortion and overdrive: In the early days of electronic music, vacuum tube amplifiers were used for processing the output electrical signals. Like any amplifier, these tube amplifiers had a maximum amplification above which they began to clip the peaks of the waveforms. While the resulting distortion may have disturbed the electrical engineers, a substantial fraction of the musicians liked the distorted sound and it became part of the musical medium.
Grover Jackson became a partner with Wayne Charvel in the Charvel's Guitar Repair shop in California in the 1970s then Grover Jackson took over the entire business in 1978 and at that time they were making guitars under the name Charvel. Their guitars were tailored to the heavy metal and hard rock genre's of the day. Then a relatively unknown Randy Rhoads, who had just joined Ozzy Osbourne’s new band, contacted them in 1980 with the idea to create a highly customized guitar. That guitar, a new take on the Flying V called 'Concorde' became the first guitar to carry the Jackson brand and the company has been popular with shredders ever since.
2. Orange Micro Dark w/1x8 Cabinet ($288): Who doesn’t love tiny yet mighty lunchbox amps and the speakers they rest upon? The Micro Dark head uses a tube front end to push 20-watts of power and coupled with a 1x8” speaker, you’ll be able to get awesome tube tone for a fraction of the price and size of a bigger rig. This little duo is well-equipped to handle clean and overdriven tones whether you are cracking the volume on the speaker or playing through your headphones.
Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.
Other high-quality specifications include a bone nut, a molded metal jack plate that is curved and makes plugging and unplugging a guitar cable hassle-free, retooled knobs, fretwire that is slightly smaller than what you’d find on most PRS electric guitars, and PRS’s double action truss rod (accessible from the front of the headstock for ease of use).
The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.
You think those guys are good? They are, but you should hear my uncle- Chris Lambert- and my cousin -Brent Lambert-. My uncle works at the Shadow Box in Columbus (or is it Cincinnati?) Ohio. He plays in a whole bunch of the music shows as a guitarist, and he rocks. Sometimes my cousin works there, too. Brent is just as good as my uncle, and they're both as good as the people you put on here.
If you pine for the days when giants scarred the earth with odes to their arena-sized wangs, then Michigan’s Greta Van Fleet are your new jam. Not only do they look like they’ve stumbled out of the pages of 70s Vogue, they also have a preternatural knack for brow-raising classic rock anthems. Guitarist Jake Kiszka is highly capable, combining Page-like pentatonic ping-pong with a bag of lead licks that channel everyone from Jefferson Airplane to Mike Campbell. 
PAINT INFO Remember to stick with the medium that you have chosen to finish the guitar with. Never mix lacquer with water base. This will lead to a cracked finish or lifting up off the clear coat. For my guitar I used a lacquer based paint that I got from an auto shop for one project and just plain white lacquer paint that i got from Home Depot. The waterbased paints and clear coats tend to be more expensive so that's why I chose lacquer. Make sure the surface has been cleaned and is dust free before you begin to paint. Try to find cans that have a fan nozzel because it makes it easier to get an even coat.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark
The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.

Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.
I have relied on the Sonic Port as a backup rig in case I do have an amp failure. At one point, I kept a Tech 21 PowerEngine 60 on hand to plug my Sonic Port into. Works great for studio and stage work. Again, so much cheaper than AXE-FX which unfortunately, this article plays heavy into spending over $2,000 for the rack mount unit. Don’t forget a decent PA, Monitors, and a Rack to mount it in (another $1000 if not more?). Yea, AXE-FX is sounding worse and worse than bringing a small combo amp..
In 1980, however, Martin had hired another guitarmaker, one John Marshall. Marshall had studied lutherie with Eric Schulte whose base of operation was in the far western Main Line suburbs of Philadelphia around Frazer, PA. Schulte himself had worked with the legendary Sam Koontz, who was responsible for Harptone and some Standel guitars, as well as his own. After learning the tricks of the trade from Schulte, Marshall became involved in the ill-fated Renaissance guitar company of Malvern, PA, just up the road from Frazer. Renaissance, you’ll recall, made those exotic plexiglass guitars and basses in around 1979 (plus a later series in 1980 designed by John Dragonetti). These were designed by John Marshall. Marshall left Renaissance to join Martin, where he was hired to work on the electric guitars which would become Martin’s 28 Series.

When two pickups are wired in series, a good portion of the treble frequencies is lost because the long pickup wire works like a resistor. Any resistor in the signal path will suppress the signal. The formula works like this: The longer the wire, the higher the resistance, and the more treble is lost. We all know this from guitar cables: When you use a very long guitar cable, the sound isn’t as detailed and transparent as it is with a shorter cable. A long cable acts as a resistor.

Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.
{ "name": "Cherry", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Cherry-1500000014895.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "10-21-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014895", "shipToStore": true, "displaySku": "J40301000001000", "displayId": "1500000014895   POS #: 112318324", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Cherry", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
From 1986-1989, “Made in China” Squier Stratocasters carry the “Affinity” decal on the smaller ball of the headstock and have serial numbers as NCXXXX with the first number the year of manufacture, e.g. NC6XXX (Made in China 1986). NCXXXX is also used for Squier Strat Bullets of the same vintage. The Affinities are practically the same as the Japanese-made Squier Bullets of the mid-’80s; the same alder bodies, same rosewood-type fretboard and maple necks. Tuners and electronics are also very similar – not the best but distinctive in sound. Common modifications are more stable tuners, larger potentiometers, better capacitors, and pickups. They had single-ply 8-hole pick guards like the ’50s Fender Strats giving them a classic look. Colors were typically black, white and red.
The MESA Bigblock 750 has a built-in overdrive channel. The Mesa M2000 has a high gain switch which can be engaged with a footswitch. The Marshall MB450 head and combo bass amplifiers have a tube pre-amp on the "Classic" channel which can be overdriven. The Ashdown ABM 500 EVO III 575W Bass amp head has a built-in overdrive effect. Overdrive is also available on many Crate bass amplifiers. The Yamaha BBT500H has three types of built-in drive effects: overdrive, distortion and fuzz. The Ampeg B5R Bass Amplifier has two channels: clean and overdrive, with the ability to combine the two. Verellen, a boutique amp company, produces a bass amplifier with a built in overdrive channel.

Acoustic guitarists can sometimes get left out in the cold when it comes to multi-effects pedals. Fortunately, the team at Boss have been listening to your requests for an innovative multi-effects pedal for acoustic guitar, and ended up creating a complete live performance option for players of all levels. In fact, they’ve crafted the best multi effects pedal for acoustic guitar that you could find in the Boss AD-10 Acoustic Guitar Effects Processor.

{"pageName":"[mf] pdp: gandl fullerton standard legacy electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"silver,36-month,60 month,24-month","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";L21430","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
The one major drawback of Guitar Tricks is the almost overwhelming amount of material that is available. There is a chance that you get distracted into trying out many different styles and techniques. You may find yourself jumping around from song to song and lesson to lesson wanting to see whether you are up to it. As a result you may not be able to follow your curriculum as initially planned. On the other hand, I strongly believe that this will broaden your horizon and make you a better and more versatile guitar player.

Other artists, such as George Benson, John Lennon, and the world renowned B.B. King would use the instrument to its fullest capability to produce a clean, bright, woody tone reminiscent of fully hollow guitars, while being able to provide the volume levels to perform in much larger concert halls without the inherent issues known with fully hollow body guitars.

There’s an old proverb that goes, “If you can’t afford a Fender Strat, get a Fender Standard Strat.” We can’t agree more. This is the guitar company that changed the world of electric guitar, so you can’t go wrong with any Fender. But, if you have the money, go with the Standard over the Squire as that’s truly a beginner guitar. The Standard has features such as three single-coil pickups, synchronized tremolo with high-mass bridge block, and a ‘70s-style headstock logo. While some sites are selling this guitar close to $400, it’s more commonly found just under $500. 

One of the most respected guitar manufacturers in the world, Epiphone electric guitars can be found everywhere from small-town basements to the biggest arena rock stages. The reason is because of their dedication to providing high-quality instruments for musicians of all tastes and skill levels, and throughout this catalog you'll find more than enough choices to prove it. After all, everyone who has a desire to crank up and play deserves an electric guitar that looks, sounds, and performs flawless, and Epiphone has an option for every budget. It's easy to see how trusted the Epiphone name is when you consider how many best sellers and top-rated items make up this section. For that matter, all you have to do is look at the many top-recording artists who have Epiphone signature models, including metal legend Zakk Wylde, virtuoso Gary Clark, Jr., and Tommy Thayer of Kiss. Speaking of signature guitars, check out the popular Limited Edition 2014 Joe Bonamassa Les Paul Standard Electric Guitar. Sporting a gorgeous Pelham Blue with a black back and a Bonamassa neck profile, this axe looks as slick as it plays. As for its sound? You can expect plenty of power in every chord you hit thanks to the Gibson USA BurstBucker-2/3 humbuckers. Now for those who prefer the lightweight feel and ringing sound of a semi-hollow, go with the Dot Electric Guitar. Equipped with dual humbuckers and a 3-way pickup selector, the Dot can go from growling snarls to crystal-clear sustain. Additionally, the two volume tone controls allow you to tailor your sound, while the smooth, 22-fret rosewood fretboard means you can play at lightning-fast speed. And this is only a taste of what Epiphone has in store for you. In fact, taking a tour through Epiphone's extensive selection of electric guitars is just as fun as playing them. From solid body electrics and hollow bodies to semi-hollows and even guitars for left-handers, the options are seemingly endless. So stick with Epiphone, and you'll have no problem finding an instrument that reflects your own discerning style.

Some of the smaller amplifiers that I like to talk so much about are not really that small. I mean, the Marshall MS4 Mini Micro Full Stack Battery Amplifier is anything but small, in terms of sound at least. It has a powerful volume output that is hard to ignore for anyone, be it in some bar or in the street or at some gig. The tall tower like shape of the guitar is exceptional in design and yes, while the stack is a little on the big side, the affordable price of it and the quality of tone and volume is definitely worth the little bit of a size problem. Definitely worth your consideration!
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
Excellent article. I have found that is a complete waste of time trying to convince guitarist of anything contrary to what they already believe about instruments. The level of passion for the “wood doesn’t matter” camp is truly astounding. We are not testing a new drug or solving cold fusion. The question is simple, does wood make a difference in the tone of an electric guitar? Intuitively, it would seem strange if it didn’t; but, there are many factors that are going to affect the sound produced from a guitar; isolating them is as difficult as creating a study that will convince anyone of an idea they already are clinging to. I think this is a pretty good experiment, better than most I have seen. In the end though, who cares?…really. If someone would like a guitar made out of a Formica counter top…go for it, locking tuners, the pickups and strings of your choice…you’ll be ready to rock. And won’t you be the clever one? As for myself, my opinion, musical instruments have character, a soul if you will. That character comes from the material it is made out of and the craftsman that made it. There is no object more alive than a musical instrument. For arguments sake, lets grant the “wood doesn’t matter” their entire argument. I’d still buy the korina instrument over the countertop. And like most stubborn asses who play guitar, you won’t convince me otherwise.
Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.
The Yeah Yeah Yeahs’ theatrically coiffed guitarist has several grueling jobs, among them holding down the trio’s entire melodic structure and holding his own against one of the most dynamic frontwomen of our time. His signature see-saw call-and-response lines leave plenty of room for tension and release, war cries, and tears, and the kind of grand, clanging chords that’ll turpentine your ears clean.
The Lotus Vantage copy (Washburn Eagle, Aria Pro II Cardinal series, or Ibanez Artist) double cutaway (batwing) guitar with a solid body, 3 per side tuners on headstock, rosewood fingerboard with brass inlays, brass nut and neck-through construction (though there may have been a bolt-on model). This was usually finished in emerald green, polished mahogany or stained blue/white breadboard style and occasionally gloss white with 2 exposed humbucker pickups.
Music is a passion for many people around the world. There are possible over 3000 musical instruments in the world, right from the most traditional ones to the highly sophisticated modern ones. Guitar is one of the most stylish modern musical instruments known to man. A lot of young stars are actually inclined towards playing a guitar. The guitar is an instruments which produces sound on the strumming of strings attached to the strand, which is like a long bar on the upper portion of the guitar. There are a number of manufacturers who manufactures these amazing instruments. But question is which the best are? Here is a list of top ten brands of guitar to choose from:
So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.
Two types of switches are commonly used for guitar mods. One is a potentiometer with a switch—a push/pull, push/ push, or the Fender S-1—and the other is a common toggle, which is available in different sizes, shapes, and configurations. When adding a switch to a passive circuit, you don’t have to worry about voltage and power ratings—all that matters is that switch will fit your guitar!

Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
As mentioned, most of the ’50s Teisco guitars were heavily influenced by Gibson-style design. At the very end of the decade or just at the dawn of the ’60s, Teisco guitars began to change to double cutaways and exhibit a playful � if slightly frumpy � more Fender-oriented design aesthetic. This was almost in lock-step with American guitar industry trends. Gibson launched its thinline ES-335 in 1958 and, indeed, changed its single-cutaway Les Paul to the double-cutaway SG in ’61. American manufacturers such as Kay and Harmony quickly followed suit. The Teisco change was a part of the guitar Zeitgeist.
Nice ible. I JUST got a Squier Tele Custom ii (2) in the mail Friday after selling a keytar on ebay for $355. I bought it because it got great reviews for having 2 Duncan (designed, made in asia?) P90's and the price was right for a 1st guitar. the only thing i do not like is the ugly tele headstock. I bought a '68 Harmony Marquis last year for my 1st 1st guitar, not really knowing at the time how unrewarding/difficult it would be to learn on a P.O.S like that. So, even tho the pups are probably the last thing I would replace on it, it was cool to read a bit by someone else with a "less expensive" tele. Look up the Custom ii online, it has a great looking pickguard and the pup selector is up on the top horn like a les paul. Thanks for the tips!
The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054. 

By the 1960s and 1970s, semiconductor transistor-based amplifiers (also called "solid state") began to become popular. This was in large part because for a given wattage level and feature level, solid state amplifiers are less expensive, lighter weight, and require less maintenance than tube amplifiers. As well, transistor amplifiers are more reliable and less fragile than tube amps. In some cases, tube and solid state technologies are used together, usually with a tube preamplifier driving a solid state power amplifier. There are also an increasing range of products that use digital signal processing (DSP) and digital modeling technology to simulate many different combinations of amp and cabinets.

Smaller combo amps may be easier to transport and set up than using separate amplifier and speaker units, and as such, they are a popular choice for many bass players. Bass players in quieter, more acoustic genres (e.g., jazz quartets which play in a wine bar or a folk music group which plays in a coffeehouse) may be able to use smaller, more modestly powered combo amps. Bassists who play in genres more associated with a high stage volume (e.g., hard rock or electric blues) may tend to use, larger, more powerful (in wattage) combo amps. While a gigging musician will typically only bring one combo amp to a show or recording session, some bassists in major touring bands have two or more combo amps on stage, with an "A/B" switching pedal used to select different amplifiers. In this way, a bassist could have a vintage tube combo amp and a modern solid state amp, and then switch between them to select a different tone for different songs.
Behold anther complete package from Les Paul guitar Epiphone series of electric guitar, with everything that you need to start playing right from the onset. For every beginner looking for that perfect set, this guitar they can rely on, not just for its sound quality, but also for the fact that it is a complete package offering lots practicality in terms of mastering the act of strumming and sound generation.
Small amps can benefit from being placed on a stand, rather than the floor, as reflections from the floor can muddy the sound. A stool or something similar will do if a stand isn’t available. For the same reason, when using larger stacks or combos with several speakers, try mic’ing one that’s furthest from the floor. Placing an amp against a wall will increase the bottom-end response, and placing it in a corner will emphasise the low end further still. A mellow tone can be achieved by pointing the amp into the corner and mic’ing from behind.

From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!

An equalizer (more often called EQ) is the device that allows you to adjust certain frequencies within your tone. The 3-band part implies that the EQ offers three points of control: bass, middle and treble. While 3-band is the standard, you can also have 2-Band EQ (which tend to offer just bass and treble), as well as 4-band EQ, 5-band EQ (low-bass, mid-bass, midrange, upper-midrange, treble) and upwards! Of course, the higher the band, the more versatility the amp offers. But 3-band tends to be the easiest to get to grips with.
• Gotta Feel It: Ultimately, what feels right under your fingers and sounds right coming out of your rig should determine your strings. It’s important to try different brands before zeroing in on a favorite. Judge a new set of strings by its brightness, sustain, tone and how easily they permit bending, fretting and picking. When a brand and gauge feel like buttah and sing like Circe, that’s the zone.
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.

Les Paul created an early solid-body electric guitar in his spare time after work at the Epiphone factory in the early 1940's famously known as "The Log". It is believed that this was the first solidbody 'Spanish guitar' every built. He went on to develop the idea further until he took it to managers at Gibson sometime in 1945 or 1946 who immediately...

Martin’s re-entry into electric manufacturing is related to the association of Richard (Dick) Boak with the C.F. Martin company. Dick Boak, with dreams of being a luthier and constantly working on guitar projects on his own, joined Martin in 1976 as a draftsman. In 1977 Boak was assigned to the project of designing an electric guitar for Martin. This resulted in the development of the E-18, EM-18 and EB-18 guitars and bass. The first prototypes of this new electric guitar series were produced in 1978, ten years after the demise of the GT-70/75, and production commenced in 1979 with guitar serial number 1000.

No-load pots – also used by Fender, these pots have the clockwise lug disconnected from the resistive strip within, resulting in infinite resistance between the wiper and the other outer lug when turned fully clockwise. These are sometimes used as tone controls, to remove the load on the pickup(s) presented by the pot and the tone capacitor when turned to 10.[10]
As far as reliability goes, a guitar is actually quite simple to make reliable. Build, sound quality and playability are much more important than reliability per se, simply because if the guitar is at least half-decently made it usually turns out to be quite dependable. The biggest reliability issue would be a guitar that cannot stay in tune very long. This is something that often happens in regards to the build and material quality of acoustic guitars, but with electrics it’s something that can usually be corrected by swapping out the tuning machines to locking ones, or at least better-performing ones as well as setting the intonation and neck relief correctly.
AGE CAN’T HINDER YOU – Working off of muscle memory and visual assistance, ChordBuddy is designed for players of every age. In fact, ChordBuddy is well-suited for those looking to play guitar with arthritis, offering a pain-free method of playing your favorite song. Utilizing ChordBuddy also allows you to learn the guitar on your own, eliminating the need for long guitar lessons with an instructor, which can result in prolonged joint pain.

As you know, like most guitars sporting more than a single pickup, your Strat lets you select any pickup by itself or choose certain dual-pickup combinations. The standard way to connect multiple pickups is to wire them in parallel. This generates the classic tone our ears know from countless records, when a guitarist uses the bridge and middle or middle and neck pickups in tandem (positions 2 and 4 on a normal 5-way Strat switch).
So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category.
Now, if you are an electric player who doesn’t like using any pedals, that’s perfectly fine. Just be honest about the reasons. If you just like the sound of your guitar and your amp, cool. If you just want to keep things simple, I understand. That’s your preference, and it doesn’t make you better in any way than someone else who does. If you’ve been a genuine listener of music, you’ve seen and heard players who’ve blown their audiences away on un-amplified classical guitars, and players who blow us away with lots of pedals on their boards.
Another important factor to consider is speaker size, which impacts overall loudness and tonality. Bigger speakers can push more air and have more low end, while smaller speakers have limited pushing power, while emphasizing the mids. In addition to size, different speaker models and cabinet types also introduce subtle differences to the overall sound.

Many recordings feature multiple guitar tracks playing simultaneously, but sometimes this can clutter up the mix. Another approach is to make each part sound distinctive by using different combinations of guitars, amps and effects. Panning the guitars to various areas of the stereo spectrum will create space for each part, while subtle use of ambient effects can create a sense of depth. EQ can be used to help guitars blend together. Try cutting certain frequencies from one guitar track and boosting those same frequencies in another.
Reverb – The best analogy for reverb effects would be playing your guitar inside a pipe. That’s an extreme level of reverb, of course, and these pedals will allow you to go from there all the way back to subtler effects like the natural reverberation of a concert hall. This effect sounds great with a clean tone, but beware of using it with heavy distortion or else you might lose too much definition from your sound.
The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.
Guitars by José Romanillos, Robert Bouchet, Daniel Friederich, Hermann Hauser I, Hermann Hauser II, David José Rubio, Dominique Field, Francisco Simplicio, Enrique Garcia, Pascual Viudes, Enrique Coll, Santos Hernandez, Domingo Esteso, Ignacio Fleta, Marcelo Barbero, Arcangel Fernandez, Hernandez y Aguado, Manuel Reyes, Enrico Bottelli and 1950's Ramirez.

PRS, or Paul Reed Smith, guitars are a high-end luxury guitar brand that broke into the rock and roll scene in the 1980s. Famous guitarists such as Trent Reznor and Vince Neil could be seen wielding these beautiful instruments. In fact, that’s probably one of the first things you’ll notice about PRS guitars. They are absolutely stunning. They use high quality wood and only use the best cuts whether it’s their cheapest or most expensive models. Even the slightest imperfections are too much for PRS. Another aspect of PRS to take note of is how they have evolved over the years. PRS is not afraid to evolve their models and most, if not all, of their models have seen changes. They take time and effort to find mistakes in the older models and improve them. From pickups to the neck shape, PRS will change it if they feel they can improve it.

Instruments with built-in effects include Hammond organs, electronic organs, electronic pianos and digital synthesizers.[19] Built-in effects for keyboard typically include reverb, chorus and, for Hammond organ, vibrato. Many "clonewheel organs” include an overdrive effect. Occasionally, acoustic-electric and electric guitars will have built-in effects, such as a preamp or equalizer.[20][21]
It’s quite interesting to look into the psychology behind our behavior when it comes to how much we pay for things in connection with how good we think they are. In one experiment, restaurant guests got served the same dish. Some of them payed a high price for their dish and some a normal lunch price. Did the guests think that their food tasted differently? Yes, they did. The guests who payed the high price thought that their food was much better than the people who got it for cheap.

And that’s about that. After ’93 Martin Stingers, like their previous Martin-brand cousins, started drifting off into solidbody byways of guitar history. The Stinger ST-2, basic fulcrum-vibrato Strats with pickguards and three single-coils, in black, red, and white, and the now ubiquitous droopy pointy headstock, was still listed in the 1996 Martin catalog, but these were pale reflections of the peak years.

Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.

1960's Harmony H-54 Rocket 2 Redburst- Here's a excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. We repaired a slight crack at input jack common area. Yes, someone years ago stepped on the cord. We professional glued it from the inside and it's stronger than new. All that shows is a slight line about 1 1/2" long on bottom edge. Anyway, the Rocket 2 is getting harder and harder to find. Two DeArmond Gold Foil Pickups power this baby. It's all original, except for the pick guard, which no one can detect. Condition other than slight repair is a 9 3/4 for this great 50 year old beauty. Guitar comes with period clip board case. SOLD
The best thing about the guitar is the design and usability is perfect for the beginners, who have an idea that how to play the guitar. It also comes with a bunch of instructions that makes it even easier to use. Once you learn the basics and master it you can easily upgrade to a higher level guitar. It can give the right feel that required from a guitar.
Depending on how you count them, there are 23 types of guitar pedals out there that can take you from "just another guitar player" to being that guy with the definitive tone and stage presence that everyone knows of around town. The only problem is it's a lot to wade through. But we've got you covered with quick summaries of what each pedal does, examples you can hear, and some visual examples for each of the guitar pedal types...
The tip of a soldering iron is very hot, around 700F, and can damage the board, component packages, and wire insulation in a fraction of a second, not to mention your own skin, so be careful the tip does not touch anything as you move it in and out of the soldering area. Put the pencil back in its holder when not soldering. Don’t leave a hot iron laying on a bench or table.
Without a doubt, Instant Guitar is a bit messy when it comes to sound quality, and from the looks of it on the web, others agree. First, there are incredible tones here; Cathedral mode is angelic and the low chord hits are drool worthy, to put it lightly. The problem is that the more you shape your guitar to sound like an actual guitar, the worst the sound quality becomes.
Before it gets shipped to you, each Monoprice guitar undergoes a setup, tuning, and inspection process by Master Luthier Roger Gresco here in Southern California. The setup ensures that the neck is straight, the action is right, and that it will stay in tune. Additionally, it comes with everything you need to get started, including strings (installed), a heavy-duty zippered black gig bag with shoulder strap, and a truss-rod wrench.
I ordered this item from their ebay store, roughly the same price with shipping, very easy to read point to point instructions, this was my first diy pedal, I've fooled around with a soldering iron but not enough to speak of. I bought it because I was not pleased with my Peavey Valveking 112's boost sound, it not only boosts the signal, it changes the tone, from the reviews I watched on youtube, it sounded like this pedal would do the trick, for the price, and the fun of a first time build, I love it, it boosts the signal with no change in tone, I'm not super impressed with the pedal's distortion tone, but I am spoiled with that saturated tube tone, there is some extra hum when I turn on the pedal, I don't know if this is my fault from the build, or what, but I would ... full review
The exact effect of the smaller cap depends on the other components in the circuit, including the guitar cable but for a typical humbucker with the tone control at max treble, volume at max and 470pF of guitar cable you get a 6dB boost peak at 3K rolling off at 12dB thereafter without the small cap.With the small cap, the peak shifts down to 1KHz and you get 10dB boost. This is because the capacitance of the guitar cable forms a resonant circuit with the inductance of the pickup then you add a further cap in parallel which shifts the resonance down in frequency. if you then roll off the volume to about 7 the peak drops to about 9dB of boost and shifts up a little in frequency because the resistance of the volume control decouples the cable capacitance from the pickup inductance.

: Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.

Guitar Center added a replica of the “Black Beauty” Les Paul Custom, with three pickups, that Peter Frampton used as his main guitar from his days in Humble Pie through his early solo career, photographed playing the instrument on the front jackets of his albums Frampton and Frampton Comes Alive. It has all the same qualities such as the three uncovered humbucking pickups and missing pickguard. The Black Beauty was not issued until 1957; however, the one given to Frampton by a fan named Mark Mariana was a 1954 model that had been routed out for a middle pickup.
The word distortion refers to any modification of wave form of a signal, but in music it is used to refer to nonlinear distortion (excluding filters) and particularly to the introduction of new frequencies by memoryless nonlinearities.[32] In music the different forms of linear distortion have specific names describing them. The simplest of these is a distortion process known as "volume adjustment", which involves distorting the amplitude of a sound wave in a proportional (or ‘linear’) way in order to increase or decrease the volume of the sound without affecting the tone quality. In the context of music, the most common source of (nonlinear) distortion is clipping in amplifier circuits and is most commonly known as overdrive.[33]
Until his death in August 2009, Les Paul himself played his personal Les Paul Guitar onstage, weekly, in New York City. Paul preferred his 1971 Gibson “Recording” model guitar, with different electronics and a one-piece mahogany body, and which, as an inveterate tinkerer and bona fide inventor, he had modified heavily to his liking over the years. A Bigsby-style vibrato was of late the most visible change although his guitars were formerly fitted with his “Les Paulverizer” effects.

The Squier Vintage Modified Jaguar Bass has major “cool” factor, and the sound holds out, too. With a P-bass style single in the neck position, and a J-bass style single in the bridge position, you’ll actually get the best of both worlds in terms of tonal options on the pickups. You have a choice between basswood (on the sunburst and crimson models) and agathis (on the black model), so there isn’t anything special about the woods they’re using in these basses. But the slim, fast-action, C contour of the maple neck will give you a nice, smooth J-bass feel that plays well above this guitar’s pay grade.

I didn’t want to spend much money (I’m a cheap bastard…part of me thinks I could never truly love a 59 Bassman unless I scored it at a yard sale for a hundred bucks. Now, tone matters more than money to me, but I tend to love the tone of crappy amps just as much as high enders, so I’d feel like a stooge dropping that kind of money on an amp. Especially since I play them and would ruin the collectable value of anything by gigging with it).
Increasing the bass and treble while reducing or eliminating the centre midrange (750 Hz) results in what is popularly known as a "scooped" sound (since the midrange frequencies are "scooped" out). Conversely, decreasing the bass while increasing the midrange and treble creates a punchy, harsher sound. Rolling off all of the treble produces a dark, heavy sound.
One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.
Since we’re talking about acoustic-electric guitars that look as good as they sound, I’d be remiss to not add the Fender Tim Armstrong Hellcat to this list of top acoustic-electric guitars. Based on the infamous 1960’s acoustic played by the punk rock legend Tim Armstrong of Rancid, I could devote an entire article to the artful styling on this guitar, which is why it consistently ranks at the top of acoustic-electric guitar reviews by players of all levels.
The wah-wah pedal is one of the most identifiable of all guitar effects, yet is one of the most simple as well.  An easy way to think of it is that you have a tone knob under your foot.  It is literally just that.  A rocker foot pedal allows you to accentuate high frequencies when your toes are down.  When you put your heel down, you accentuate the bass frequencies.
If you’ve been playing for a while, chances are pretty good that you’ve probably already built up a collection of four, five or 10 stomp boxes, which now leaves you with the question of how to hook them all up and use them in your rig. Or perhaps you’ve hooked everything up and wondered why you get howling feedback, excess white noise, hum or silence whenever you engage two or more pedals at once.

I think Matts’ advice is good, (old guitar strings can be helpfull for “fishing”) but if you change your p’ups and switching often an accessible control cavity is a great thing, just be sure to drop all pots and such into the body and drill through the potentiometer holes so you know where to place template and assure router bit won’t hit anything dangling in the body.
Richard Thompson has been one of rock's most dazzling stylists since his days with Fairport Convention, a British folk-rock band that veered into English traditional music. Shooting out life-affirming riffs amid lyrics that made you want to jump off a bridge, he combined a rock flatpick attack with speedy fingerpicking. His electric-guitar solos, rooted less in blues than in Celtic music, can be breathtaking, but his acoustic picking is just as killer; no one knows how many tears have been shed by players trying to nail "1952 Vincent Black Lightning."
Electric Guitars- Vintage, new & used / Second-hand electric guitars by Kay, Teisco Del Rey Ray ET J-1, Univox & Silvertone. Cheesy Japanese, Surf Guitars. Also guitars by Ibanez, Gibson, Fender, Peavey, Martin, Zon, Gretsch, Rickenbacker, Diasonic & More. Les Pauls recording, lap steels / slide guitars, Barney Kessel style, Fender Stratocasters, Telecasters, Squire Bullet series, Peavey Falcon neck Martin Acoustics, bass guitars, Zon Legacy Elite 5 string Bass, Diasonic double single cutaway, Rickenbacker, archtop, Gretsch TW-100T Traveling Wliburys guitar, Hamer Mirage 1, Yamaha sg-2000, Fender Jag-Stang, Gibson Howard Roberts, Ibanez Artist AR-100 to name a few.

8e FRETTE HAUTEUR La hauteur des cordes est réglée lors de la fabrication des guitares et des basses Ibanez. Néanmoins, plusieurs facteurs peuvent provoquer la variation de hauteur des cordes d'un instrument. Les guitares sont sensibles aux variations de température et d'humidité. Une hauteur de cordes trop importante peut rendre l'instrument difficile à...

For something like the application you suggest, getting a used prior generation Line 6 pedalboard like, say, an HD500, might be more cost-effective than trying to patch your laptop into the effects loop of an amp. You can fine tune the Line 6 and add downloaded patches to it with your laptop via a USB cable, but still be able to hook the Line 6 up to your amp with standard 1/4″ TRS plug instrument and patch cables like you use with stomp boxes. Your total outlay would be maybe $250, possibly even less, and that particular model is giggable, versatile, includes a looper, and sounds about 99.5% as good as Line 6’s current stuff. Even the POD X3 Live I have lying sounds pretty darned convincing on many of its models, and it’s like three generations long in the tooth.
Another great thing about this guitar is the Min-ETune system that offers 16 tuning presets. This not only makes it super quick to tune your guitar for everyday use, it’s also great if you need to tune your guitar up or down. It saves you a lot of work and time! It’s also a feature that makes these electric guitars for beginners who don’t know how to tune their guitar, and even if they of course can use a tuner this is still a faster option.
As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
Compared to building something from scratch, the kits listed here are relatively easy to work with. Still, there are some that require more patience and experience, like those with set-necks and hollow bodies. On the flipside, there are kits that make life easier for you with their no-soldering required electronics and bolt-on necks. It is recommended that beginners go for easier builds, but with so much information available in the internet age, it should not hinder you from getting what you really want - just make sure to be patient and do your homework.
This happens when discussing variables within a number of different art forms—you simply can’t rely on scientific equipment to make some assessments. You can’t trust the gadgets; instead, you have to rely on your ears. Even relying on your ears can be difficult because it is, once again, a subjective discussion. “We don’t hear what’s out there,” Millard says. “We hear what we think we hear. It’s the psychological or neurological way we hear. To think we hear what sound is out there is so naïve and so wrong.” Trustworthiness aside, this brings us to another concept that pops up frequently when discussing the nature of tone: the role of good old fashioned, organic, human beings.
The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.
Ibanez is a Japanese guitar manufacturing company, which is famous for being the first to mass-produce the seven-string and eight-string variants of guitars. The perfect size, great projection and beautiful tone offered by AEL, PF and EWP series of Acoustic guitars are remarkable. RGX and the GRX series of electric guitars come with the Ibanez brand at an affordable price. The mid-range GRG series include offers greater precision, high performance and playability.

“You can also think of it as what the signal path in a studio situation would be if you were to plug your guitar directly into the input of your amplifier, and process that sound through outboard effects. You’re not going to have your echo first before going into your distortion boxes—unless you’re looking for a specific sound—because you want the echoes to die out naturally, and not with your distorted sound.”
You planned out your hardware but it is best to make the purchase after you know you have the body and neck built and made sure they will fit together. If you have made it to that point, you are ready to put in the hardware components. Realize that you may need to do some basic soldering. If you need some guidance in that area, you can get it in a free course on metalworking.
Like many engineers, I learned the basics of recording guitars by doing live sound and occasional session work. But my "higher education" began when I was hired by a blues/R&B-oriented mail-order record company, and I "had" to listen all day long to recordings from the '40s, '50s, and '60s. No matter how primitive or poor the recording quality on those old discs, I was constantly amazed by the array of exciting sounds produced by electric guitar. Later, when I started recording blues sessions in my own studio, I learned firsthand about the key elements that contributed to the great tones that I'd heard on those classic recordings.
Guitar pedals and other effects, including an early version of the wah-wah pedal used by Jimi Hendrix and the Tone Bender fuzzbox pedal, a Vox variation on the famous original Gary Hurst Tone Bender (used by Jimmy Page of Led Zeppelin and Jeff Beck of the Yardbirds as well as The Beatles, Spencer Davis and others), were also marketed by Vox and later on manufactured in Italy.
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
I consider Squier and Epiphone to be the two top brands beginners should be looking at for their first guitar. However, there are some key differences when it comes to their flagship instrumets. Where the Epiphones listed above have a pair of humbucking pickups, the Squier Stratocaster has a trio of single coils, and the Telecaster a pair of single coils.
Flat tops from 1945 to 1969 are considered good quality and have good sound, although they are not as collectible as the 1920's to 1944 steel string models. This is largely due to the change in bracing and materials Martin started using in 1945. Rosewood models of Brazilian rosewood are most collectible from this era. This is because Brazilian rosewood was basically unavailable since 1970 due to export problems. Because of this, these models are considered more collectible.
Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?
One of the first successful methods was to record a track as you would any other. Then you would take the recording and play it through a speaker that is placed in a very large room. The magic happens when you put a microphone somewhere in that room to essentially record the sound of a recording. However, by placing that speaker in a large room, they have added a layer of natural reverb.
Gary Moore also created his own signature Gibson Les Paul in the early 1990s. Characterised by a yellow flame top, no binding and a Gary Moore truss rod cover. It featured two open-topped humbucking pick-ups, one with “zebra coils” (one white and one black bobbin). Gary formerly owned Peter Green‘s vintage Les Paul Standard with an accidentally reversed pick-up magnet.
As jazz-rock fusion emerged in the early 1970s, many players switched to the more rock-oriented solid body guitars. Other jazz guitarists, like Grant Green and Wes Montgomery, turned to applying their skills to pop-oriented styles that fused jazz with soul and R&B, such as soul jazz-styled organ trios. Younger jazz musicians rode the surge of electric popular genres such as blues, rock, and funk to reach new audiences. Guitarists in the fusion realm fused the post-bop harmonic and melodic language of musicians such as John Coltrane, McCoy Tyner, Ornette Coleman, and Miles Davis with a hard-edged (and usually very loud) rock tone created by guitarists such as Cream's Eric Clapton who had redefined the sound of the guitar for those unfamiliar with the black blues players of Chicago and, before that, the Delta region of the Mississippi upon whom his style was based. With John Mayall's Bluesbreakers, Clapton turned up the volume on a sound already pioneered by Buddy Guy, Freddie King, B.B. King and others that was fluid, with heavy finger vibratos, string bending, and speed through powerful Marshall amplifiers.
Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.

Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
Some guitars have what is called a push-pull knob where pulling the knob will change a setting, or access a different setting. For example, some guitars have one knob when pulled will turn the bridge humbucker pickup as if into a single-coil pickup, which is known as a coil-split. Some guitars like ones from Fender have what is called the Fender S1 switching system where pushing a knob will alter the behavior of the pickup selector.
In 1932, John Dopyera left Dobro and came back into the National fold, regaining control of the company. We can only speculate that the absence of Beauchamp has something to do with his decision. National and Dobro merged in 1935, becoming the National Dobro Company. However, until the end of the ’30s, when National Dobro finally completed its relocation to Chicago, Dobro instruments continued to be made in L.A. by what had been the separate Dobro Corporation, even though it was a part of National Dobro. Got it? Hmmm…
Small amps can benefit from being placed on a stand, rather than the floor, as reflections from the floor can muddy the sound. A stool or something similar will do if a stand isn’t available. For the same reason, when using larger stacks or combos with several speakers, try mic’ing one that’s furthest from the floor. Placing an amp against a wall will increase the bottom-end response, and placing it in a corner will emphasise the low end further still. A mellow tone can be achieved by pointing the amp into the corner and mic’ing from behind.
Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).
Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
Popular condensers: when it comes to condenser mics for guitar-cab miking, the AKG C414 (in its various flavours — the C414 B-ULS is pictured above left) and the Neumann U87 (centre) are both popular choices. Some producers also frequently look to the U87's predecessors, the U47 valve (pictured) and FET models, and the U67.The characteristics that producers most often seem to be looking for in these mics are their extended frequency response, especially at the low end, and the slightly softer, more diffuse sound imparted by the large diaphragm. These mics also tend to boost the 5-15kHz region, but this boost is rapidly lost as you move off-axis (it is inherently difficult to design a large-diaphragm capsule with an even off-axis frequency response).
Joe Perry is the American distillation of the good-old Keith Richards/Jimmy Page recipe for sideman/lead guitarist cool. He’s got the look and the licks, and he’s maintained both over the course of three or four decades—despite all odds. Jagger and Richards are the Glimmer Twins, but Perry and Aerosmith singer Steven Tyler went down in history as the Toxic Twins.
Much of a B3's magic comes from good mic placement and the player (the right drawbar settings are game changers). EQ should be applied sparingly and mainly as a corrective measure. Usually it's good to look to anything clashing with the bass (80 to 180 Hz), and if it's feeling a little "chubby" in the middle and either can't get out of its own way or doesn't play nice with other mid-heavy instruments or guitars, look to make cuts somewhere between 300 to 500 Hz.
Much of the difference between one make of guitar and another is in the player’s head. I doubt whether many people listening would really notice the difference and they certainly wouldn’t care. That said, there are differences in feel and in the player’s perception of the sound. I currently have four Gibsons and two Fenders, so you can see where my sympathies lie, but currently I’m more taken with either of my two Gretschs. One point of correction about scale length though. Over the years 25.5″ became standardised, probably by Martin. Fender copied this when it produced the Broadcaster/ Nocaster/ Telecaster since 25.5″ was the scale length for a guitar and Fender had no previous experience hence the poor neck radius and bad controls. Gibson, being actually considerably more innovative (I.e. the truss rod, the archtop, the raised finger rest/ scratch plate, controls for each pickup etc etc in fact most of the fundamentals we now take for granted) had worked out that scale length should be a function of body size. All of Gibson’s full size (17″ and up) guitars have 25.5″ scale lengths. Smaller bodies get shorter necks. So 24.75″ is only one of Gibson’s scale lengths sunce it has used shorter and longer as appropriate.
This is basically the same as having an entire studio’s worth of gear under your feet. You have 72 amp models to play with, painstakingly recreated from reference amps such as Vox Ac30 amps, Hiwatt Custom 100, Fender amps and more. There’s 194 effects to choose from ranging from distortion to modulation to delay, compression, wah – basically any effect you can think of! There’s also 37 cabinets that you can choose from which gives each amp model and effect a unique sound as well as 16 microphones which provide unique tonal qualities to your overall sound– we challenge you to get bored of this!
Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.