It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.
A great app for playing and basic editing of general midi files is Sweet Midi Player which includes a lyric viewer for midis with lyrics/chords. You can load one of the General Midi SoundFonts above to greatly improve the sound quality. For Windows PC use the free program Coolsoft VirtualMIDISynth to install a new GM SoundFont (Get the latest version 2.1.0 for Windows 10).
Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
I followed with visits to six Los Angeles music stores to play as many guitars as I could (more than 60, including multiple samples of many models), so I could get an idea of what their right-out-of-the-box quality was like and which ones offered the best value. I emerged with a list of the most promising models, and I contacted the manufacturers to request samples. In a couple of cases, I allowed the manufacturers to substitute models that they felt were better suited for this article.
Wow, to work with Johnny Mac! But he makes anything sound better, right? I am not a Stick player (love the instrument though), but I would think with a well-tuned setup, it might actually be easier? I think Tony Levin is running a Kemper now for his Stick. The whole idea isn’t an either/or thing, or which one is better. The idea is “running direct is a thing now, and here’s why.” But no one is taking our amps away. BTW, Bootsy is cray cray.
There’s so many multi effects pedals out there to choose from, that finding the right one that suits your musical style and your budget can be a little difficult. depending on what your style or genre is, you’re could be wondering which multi effects pedal is best for metal, or curious if your multi-effects pedal will work with your tube amp or even which option is right for your acoustic guitar, but fear not as we aim to answer all those questions and more.
Besides instrument inputs and speaker outputs (typically via 1/4" jacks), an amp may have other inputs and outputs. These can include an auxiliary input jack (sometimes with its own level control, for a drum machine), "send" and "return" jacks to create an effects loop, a “line out” jack and an extension speaker jack. Practice amps sometimes have a 1/4" headphone jack, or stereo RCA or mini jacks for connecting a CD player, portable media player or other sound source. Some guitar amps have an XLR input so that a microphone can be plugged in for singing. Guitar amps that include a mic input are in effect small, portable PA systems. Some amps, typically bass amps, have an XLR connector to provide a balanced output from the preamp section to go into a PA system or recording input.
Guitars by José Romanillos, Robert Bouchet, Daniel Friederich, Hermann Hauser I, Hermann Hauser II, David José Rubio, Dominique Field, Francisco Simplicio, Enrique Garcia, Pascual Viudes, Enrique Coll, Santos Hernandez, Domingo Esteso, Ignacio Fleta, Marcelo Barbero, Arcangel Fernandez, Hernandez y Aguado, Manuel Reyes, Enrico Bottelli and 1950's Ramirez.

RACING STRIPES Once you have checked out the color coat and are satisfied with the results and have let it dry completely, you can move straight to clear coats or add some racing stripes... or any other design you feel comfortable painting on. I did a paint splatter on the guitar I'm currently working on and it looks awsome. Plus it was realy easy. I just sparyed some black laquer paint in a pan, dipped a brush in it and splattered it on to my liking. For racing stripes make sure you get auto masking tape so you don't get any bleed through when you paint. Decide where you want you lines to go and tape them off. Use a garbage bag to cover the rest of the guitar and make sure all the other areas of the body are covered and taped off to prevent any unwanted spray from getting on the guitar. Spray just enough coats of paint to cover up the base color. You don't want it to be too thick because you will lay daown a clear coat on top and wet sand to level out the finish. If it is too thick it will take much more coats of clear and more sanding than you will want to do just to level it out.
Understandably, the Blackstar ID:Core Stereo 20 V2's main selling point is its versatility, and this is reflected in the reviews. Sound quality also got a lot of thumbs up, with many describing the amp as full sounding, thanks to its stereo speaker configuration. For something this versatile, the amp's ease of use also gets commended quite often, with some finding it easy to dial in different sounds. Finally, a good number of users find the amp's overall build quality to be solid and reliable.
This truly is a pleasure writing about the best kept secret in the guitar world. The G&L Legacy Tribute. I own a USA Hamer Gold Top Archtop Standard with P-90's and it's stupendous guitar. But like all Les Pauls and high quality Mahoganies, it has a growl suited for certain kinds of Rock N Roll. However, there is another voice in my guitar arsenal and I only have one other. The G&L Legacy Tribute. This guitar can cover the other half. I bought this used for $299 and four years later I still can't put it down. So I have a $2600 guitar and a $299 guitar and love them equally. What does that tell you about the Legacy Tribute?
Dean Guitars is an American manufacturer, founded in Chicago in 1977. They build their guitars for speed players, and are famed for their eye-catching models, including the iconic Razorback. Signature models are also a specialty and they produce guitars for the likes of Dave Mustaine and Michael Angelo Batio, as well as huge line of Dimebag Darrell signature models.

Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”
A lot of people will tell you that Jackson is not what they used to be. I’m not really going to try to refute or prove this claim, but their guitars are holding up pretty well at this moment. It’s still a brand you can trust to build you a solid guitar. Case in point that JS32 Dinky. It’s my favorite Jackson even though there are much better models in their current lineup.
Chorus is useful for 'softening' rhythm guitar or synth pad sounds, but it does tend to push sounds further back into the mix, so it should be used with care. Adding more brightness to the sound can help compensate for this effect. Chorus also works well on fretless bass, but tends to sound quite unnatural on vocals. Phasing can be used in a similar way to chorus but, whereas chorus creates the impression of two slightly detuned instruments playing the same part, phasing sounds more like a single sound source being filtered, where the frequencies being 'notched out' vary as the LFO sweeps through its cycle.

A lot of amateur guitar players are tempted by the ‘cut’ of a high treble sound that gives their notes definition above the cacophony of the rest of the band. They become so accustomed to this sound that they lose sensitivity to its harshness. Treble becomes the ultimate weapon in their arsenal for the volume war, but to the listener, all they hear is a headache, aka bad tone. offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.
If you’ve never listened to Chet Atkins, you should do it right now. The rockabilly player was a skilled instrumental guitar player, playing most of his songs without any backing from other musicians. For a great sample of his talent, give a listen to his version of “Mr. Sandman.” His alternating thumb rhythm and syncopated melodies are marvels of beauty and precision on the instrument.
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.

In 1952, Alfred Dronge – co-owner of small New York City music shop Sagman & Dronge – registered the Guild Guitar Company. The following year, they began producing deep hollow body guitars, a reflection of Dronge’s love for jazz music. The brand grew steadily through to the 70s – when Alfred Dronge died unexpectedly in a plane crash – getting their instruments in the hands of musicians such as Buddy Guy, Muddy Waters, and Bonnie Raitt. In the 80s, Guild began producing signature guitars for musicians Hank Williams Jr. and Brian May of Queen. The brand moved around frequently and it wasn’t until 2014 that they settled in their present headquarters in Oxnard, California – where all of their line of USA made guitars are now produced. To this day, they still produce a wide variety of hollow, semi-hollow, and solid body guitars that look as beautiful as they sound.
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
However, unlike a boost pedal, the overdrive effect is not dependent on the amplifier to have a distorted sound. The overdrive pedal will internally boost the input signal so much that the top of the signal wave will be forced to naturally shrink itself. This is called soft clipping and it simulates amplifier like clipping as though an amplifier was being overly driven, hence the name overdrive. The distortion pedal will also boost the input signal but will then add resistors within the circuitry to not just shrink or soft clip the wave form but completely flatten the wave peaks. This is called hard clipping. For more understanding on the differences between soft clipping and hard clipping see the illustration below.
Most users are happy with what they got for the money, from its wood quality, to the included hardware and electronics. As expected, many of its buyers are fans of the Les Paul Jr who want to try their hand at customizing their own straightforward rock machine. Surprisingly, there are some who are happy with its default configuration, including the feel of the neck, the sound of the P-90 pickup and the quality of the tuners.
{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}
Ovation Guitars, in conjunction with the DW Music Foundation (DWMF) will debut the RS Rockstar™ guitar. This six-string, “RS” model guitar will be donated to each Notes for Notes location along with a DW drumset and an LP cajon to equip each studio with professional level musical instruments. The DWMF will also work with other partnering charities to donate RS Rockstar™ model guitars to music education programs in underserved communities worldwide.
We have taken a look at the many varieties of electric guitars available in today’s market (you can read about the types of acoustic guitars and even guitar strings as well).  With this many options, it is wise to consider the genre and tone you are searching for by researching what your favorite artists choose to craft their sound.   Your choice may be based upon visual appeal and cool factor, but make sure the instrument you choose is capable of producing the tone of the style of music you play from your heart!  It's a large selection of body styles but hopefully now you're also comfortable with all of the sounds of the various types of electric guitars.
The 700-series models were solid-body instruments while the 800-series models were hollow bodied. This is a small enough product range to make a nice little collection and the guitars are made well enough to be used. (Many of the early Japanese guitars were cheap and simply unplayable right out of the box. I know... I had one.) However interest in them seems to be rising and thus, prices are following along.
Some early Valco instruments continued to make it into the marketing pipeline – early on, at least. Probably as a sign of the increasing difficulty in getting product, the Spring/Summer 1942 Sears catalog sported a full complement of Supro guitars, essentially the ’41 line, all labeled with the newly-chosen Sears brand name, Silvertone. Shown in the ’42 Sears catalog were the Supro Capitan and Supro Rio, now renamed the Silvertone Crest (carved torch logo) and Silvertone Spanish (no logo), respectively. The Capitan had a standard trapeze tailpiece rather than the Dobro variety, with permanent cord coming out of the top of the lower bout!
From Clean to Modern, chose from 8 amp settings, four modulation effects and four delay/reverb effects, with tap tempo. Its Hi-Fi sound can be sculpted by a three-band EQ, giving it a lovely spacious sound distribution; and special off-stage circuit gives it excellent overdrive qualities even at low, discreet volumes. Finally, its sleek designer looks will fit into any living space, especially with its soft tube glow.
The 2008 Les Paul Standard is one of the first models from Gibson USA to utilize the revolutionary Plek machine in setting up the guitar. The Plek is a German-made, computer controlled machine that carefully measures each fret, along with the fingerboard height under each string, and then automatically dresses each fret, virtually eliminating string buzz and greatly improving the overall playability of the guitar. This pioneering process does in minutes what it takes a luthier several hours—sometimes even days—to accomplish. Every fret is accurately aligned, and the guitar is properly intonated, leaving the instrument “Plek’d” and amazingly playable.
Theory - These sessions will be devoted to investigating how the fretboard works, how strings and notes relate to each other, what chords are made up of etc. A lot of theory time will be spent reading and analysing diagrams and your guitar's fretboard. This aspect is for understanding how music works on the guitar, to map out the fretboard in your mind so you can later apply the physical techniques with confidence. If you're serious about getting good on guitar, you need time devoted to theory.

Fishing some thin wires through the jack holes from outside can work. I use stranded wire and strip the insulation from the end. I’ll divide the strands and wrap them around the pot shaft. It’s a delicate balance — you want enough ‘wrapping’ to grip the pot for pulling, but not enough to get in the way of getting the pot shaft through the mounting hole.
Solid body guitars offer a fantastic platform for builders, allowing them to craft the wood into literally any shape. Naturally you’ll probably want to opt for a guitar with a single-cutaway Les Paul or Telecaster style shape, or a double-cutaway shape like a Stratocaster, Yamaha Pacifica, or Ibanez’s RG. However, the more extroverted beginner can check out some cool styles that always catch the attention, such as V or Z shaped guitars, or anything from Dean Guitars – especially if you want an eye-catching paint job!
While anything with decent gain could be used for metal, a dedicated metal amp is the only thing a dedicated metalhead would want to use. These amps are actually very similar to other styles of amp, with one big difference – they are loaded with massive gain, which is essential for metal. A perfect example of what makes a great metal amp is the EVH 5150III. Designed with Eddie Van Halen, this all-tube amp head is an absolute beast in term of power and gain, with face-melting distortion and 50 watts of power.
I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar.  I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best.  You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment.  You get treated like a valued customer.  Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars.  They have a great variety of quality instruments.  Plus, they have some really cool, unique guitars.  A place like this is so rare nowadays.

In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him. (info from Wikipedia, photo of Jimi Hnedrix from
Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.
At the end of the day, sustain is just a fancy way of saying the length of time a note will remain audible after you pluck it. Sustain is mostly dependent on how much the body and wood of your guitar can resonate sound. Typically, solid-body guitars are the go-to source of sustain, but many pedals and amps are built with the purpose of increasing the effect. Some people prefer long sustain for certain genres; others simply are too lazy to want to pluck the string again.
Hi, I’m John Anthony, Playing and collecting Cool Guitars is my hobby, and all of my friends and relatives know it. For the reason, I receive many queries over the phone, email and social media about Best Guitar Recommendation. Which one they should buy now, which will fit them etc. And finally, I created this and started putting my suggestions and reviews here.
Yngwie Malmsteen released his Concerto Suite for Electric Guitar and Orchestra in 1998, and Steve Vai released a double-live CD entitled Sound Theories, of his work with the Netherlands Metropole Orchestra in June 2007. The American composers Rhys Chatham and Glenn Branca have written "symphonic" works for large ensembles of electric guitars, in some cases numbering up to 100 players, and the instrument is a core member of the Bang on a Can All-Stars (played by Mark Stewart). Still, like many electric and electronic instruments, the electric guitar remains primarily associated with rock and jazz music, rather than with classical compositions and performances.[37] R. Prasanna plays a style of Indian classical music (Carnatic music) on the electric guitar.
The Supro line continued to grow in 1938, as can be seen in the CMI catalog. Still around was the Supro Spanish Guitar, now called the Supro Avalon Spanish Guitar, other than the name change (which is not featured on the guitar, as far I can ascertain), it is identical. Gone are the wood-bodied, frumpy-pear Supro Hawaiian Model and the Model D amplifier, although a Supro Special amplifier is mentioned (and not described) as being available for $40, the same price as the Model D. One and the same?
This guitar was first introduced in 2014, and has since been one of their more popular acoustics - thanks to its USA hand-crafted quality which you can own for a relatively accessible cost. The guitar is built using North American tonewoods that include solid walnut back and sides, along with a solid Sitka spruce for the top. This configuration, along with Gibson's premium build quality results in a balanced and full sounding acoustic voice, that elegantly matches the vibe of the instrument.
Before World War II, Epiphone was one of Gibson's fiercest competitors in the guitar market—especially when it came to archtops. With legendary models like the Broadway, Deluxe, Emperor and Triumph, they were a force to be reckoned with on the hollow-body electric guitar scene. In the 1940s, Epiphone went from one of Gibson's competitors to one of its subsidiaries, paving the way for Epiphone Electric Guitars to become synonymous with many Gibson models.  Despite this drastic shift, Epiphone continues to be renowned for their archtop electric guitars even today. Models like the Wildkat Royale and the limited edition ES-335 Pro are worthy throwbacks to that golden era of electric guitars, giving you authentic vintage sound that's perfect if you're into classic rock. Another Epiphone original that's still available today is the solid-body Wilshire. The impact that the Wilshire had on guitar design is so strong that it's still one of the first mental images that comes to mind when we think ""electric guitar.""
Musicians might not want to be replaced by machines - we (or they, as it were, because I lost whatever musician credentials I might have earned annoying people with my wooden flute as a beggar on the streets of a tourist town when I started programming computers to play music) might make a strong case that no machine can express the human soulfulness of music. It is easy to conclude that, the more of the musical task that is assigned to a machine, the less soul is expressed in the music. Well, great big rock-n-roll wall of sound that all over your acoustic guitar soul. That stack of Fender amps I can hear five miles from the stadium where David Gilmore is strumming a guitar is as much an instrument as was the Shepard's lute - and a much more popular instrument now, for audiences attuned to the daily roar of tires crushing air against pavement.
That "bad players use pedals to mask how bad they are" stigma comes from people who can't use effects. I mean, you can't just auto-set your delay to syncopate with your playing and make you sound like the Edge with every not you hit. You have to figure out the delay's rate, and what notes you can "delay" together so it doesn't sound like a jumble of notes.
Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.

So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.

Wholesale Guitar SymbolsWholesale Mahogany GuitarsWholesale Hollow Guitar EsWholesale Guitar Finger PicksWholesale Snakes GuitarWholesale Golden GuitarsWholesale Sunburst Hollow GuitarWholesale Custom Double GuitarWholesale Custom Shop Guitar 1959 Tiger FlameWholesale Ems Shipping GuitarWholesale Children's GuitarWholesale Fret GuitarWholesale Guitars LowWholesale Wood For GuitarsWholesale Red Active Guitar
This technique is only possible with 4-conductor pickups or pickups that already have coil-tap lead instead of all four leads. Coil tap is a connection between two coils in a humbucker and is sometimes referred to as “series link”. Vintage style pickups have their coil tap enclosed in the pickup which means that we can’t play with it. Having coil tap gives us a couple of wiring options:
It's not subjective. When you're setting up a guitar you measure the height of the strings, typically you're at about 4/64" for the high E and 5/64" for the low E. You can go above or below the recommendation but if you go too low you can start to get a bit of fret buzz. How low you can go is not a function so much of what guitar you own, but how level your frets are and your neck relief. Most good guitars can be set up to play "fast". Obviously they don't get faster when you paint them fluorescent orange, or make the headstock pointy.
On some amps with a number of input and output jacks, the jacks may be consolidated in a patch bay. Some amps have an input jack for a foot-operated switch which can be used to turn on an effect or switch to a solo channel. Some higher-end amps have a Speakon speaker jack for an extension speaker. In the 2010s, the Speakon jack is often used in high wattage amplifiers, because the design of the connector, which is shielded from human touch, prevents electrical shock from a high-powered amplifier. Some amplifiers have a "tuner out" jack, for sending the instrument signal to an external electronic tuner. Bass speaker cabinets often have two 1/4" jacks. These are provided so that one speaker cable can be plugged into the first jack and connected to the power amp; if the bassist wants to use a second cabinet, a second speaker cable is plugged into the second jack and then into second speaker.
Featuring classic Fender design, smooth playability, and simple controls, the Squier Classic Vibe Telecaster '50s is a great first electric guitar. The fixed bridge and quality tuning machines ensure simple and reliable tuning stability—a potential frustration for new players trying to learn on poor quality guitars. Single volume and tone controls along with two bright-sounding single-coil pickups give the beginning player a wide range of tones that are easy to control. The Telecaster has been a mainstay in music for decades and is especially associated with great country, pop, surf and rock sounds.
Later, on-board electronics allowed guitarists to move about the stage, rather than stay immediately in front of a microphone. On-board electronic tuning, availability, uniformity, and frugal costs facilitated performances by guitar ensembles like Robert Fripp‘s Guitar Craft students. Ovation has also produced solid-body electric guitars and active basses.
Although Orbison’s good friend and Sun Records labelmate Johnny Cash may be known as “the Man in Black,” Orbison habitually dressed from head to toe in black in the early Sixties, a decade before Cash adopted his dark uniform. Even Orbison’s raven hair and impenetrable jet Ray-Bans were blacker than the cover to Spinal Tap’s Smell the Glove, adding to his alluring persona as a mysterious, brooding artiste.

Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at:

This aim of this site is to provide high quality SoundFonts (virtual musical instruments in sf2 format) that can be played using a midi keyboard connected to a computer, tablet or smart phone. Emphasis has been placed on real or acoustic instruments particularly piano and other favourites for keyboard players (pads, strings, electric pianos, organs and orchestral) but some SoundFonts here also include high quality guitars, some synths and ethnic instruments. There is also a nice GM set for playing general midi files. The SoundFont format sf2 is widely supported by lots of programs/apps and devices.

Bowers loves combining incredible chops with strong melodies, and his influences read like a “Who’s Who” of guitar heroes. Included are such high-tech players as Steve Morse, John Petrucci, and Steve Howe. While talking with Frank, I learned that he has had two of his Les Pauls customized to accommodate a push-pull tap switch on their tone knobs. In the normal position he has full control of his Seymour Duncan humbuckers; in the pulled-up position he goes to a single coil “spin-a-split” configuration that allows him to get more of a “Tele” tone at zero—or he can dial in a bit more of the other half of the pickup to emulate more of a P-90 sound. The thinner “Tele-ish” tone cuts better, allowing more clarity on his leads and rhythm patches.

Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  1 Meg Ohm, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
{ "thumbImageID": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange/H96901000006000", "defaultDisplayName": "Squier Affinity Series Stratocaster Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Competition Orange", "sku": "sku:site51500000022270", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange-1500000022270.gc", "skuImageId": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange/H96901000006000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Slick Silver", "sku": "sku:site51500000022267", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Slick-Silver-1500000022267.gc", "skuImageId": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Slick-Silver/H96901000005000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The matching Baton amplifier had the same cabinet shape as the Supreme, but was smaller, with a brown simulated alligator covering, and a square grill with rounded corners. It had three tubes, four watts of power, and a 61/2″ speaker. Similarly, it’s possible that the Baton amp may have debuted by 1940. In April, 1942, the Baton Guitar Outfit cost $57.50.

To produce Music and create the melody man has invented some musical instruments. In this process he has created the Guitar. Guitar is the instrument in which by the vibrations of the strings we can amplify the music. It’s an instrument having “a long, fretted neck, flat wooden soundboard, ribs, and a flat back, most often with incurved sides”. The melody produced by Guitar is also depends on the better finishing of its parts and strong pickups. That’s why it’s a vital task to select the best quality of guitar.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"schecter","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
An utterly odd topic would be a discussion of woods for a certain tone. Wood does no magic to the tone. It has properties which might change the resonant behavior of a guitar body. But, that it does by some very course parameters, say stiffness and specific weight. Of very same importance is the shape of the plank which is referred to as “the body”. Stiffness, weight and shape work all together.

Vox had experimented with Japanese manufacturers at the end of the sixties with the Les Paul style VG2, and in 1982 all guitar production was moved to Japan, where the Standard & Custom 24 & 25 guitars and basses were built by Matsumoku, the makers of Aria guitars. These were generally regarded as the best quality guitars ever built under the Vox name. However, they were discontinued in '85 when production was moved to Korea and they were replaced by the White Shadow models, although a number of White Shadow M-Series guitars and basses are clearly marked as made in Japan, suggesting a phased production hand-over.
While it may not look like a classic amplifier, if you're into classic rock style tones for home use, the Yamaha THR10C is probably the amp that you really need. Ideally, we would all be rocking with big amps, but not all of us have the space or acoustically tuned rooms to let loose. And since we are using low volume amps more often, Yamaha designed their THR line to be the best in providing you with just that - low volume performance for jamming, practice or recording. The THR10C is part of this line, featuring the same 10W setup and stereo 3" speakers, but with tones that replicate the sound of classic amps. It also houses some essential effects which include reverb, delay, chorus and more. In addition to the usual clean to overdriven tones, Yamaha also equipped this unit with acoustic guitar amp and bass amp models, so you can directly play or record with those instruments. All these features are packed in a distinct and portable profile, and is powered either by the supplied AC adapter or via 8 x AA batteries.
Growing popularity of the guitar in the early 1900s, fueled by the growing popularity of folk music and country and western music, led to a demand for louder and more percussive guitars. In response, many companies began to use metal strings instead of catgut. These became known as steel-string guitars. By 1921, Martin had focused production towards this type of guitar.
This is another invariable question that you should be asking yourself if you are going to buy an acoustic guitar. This is because you also have to consider your comfort level with the guitar body so that you do not have any problem playing it. Be it the one with a shallow body or a full body or be it an Ovation guitar, you will have to make the right kind of choice.
The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
There were marked differences between the other Les Paul models and the Les Paul Junior. For instance, although the Junior’s body outline was clearly reminiscent of the original upmarket Les Paul guitar, the Junior issue was characterized by its flat-top “slab” mahogany body, finished in traditional Gibson Sunburst. The Junior was touted as an inexpensive option for Gibson electric guitar buyers[citation needed]: it had a single P-90 pickup, simple volume and tone controls, and the unbound rosewood fingerboard bore plain dot-shape position markers. However, as a concession to the aspirations of the beginning guitarist buyer, the Junior did feature the stud bridge/tailpiece similar to the second incarnation of the upscale Gold-Top.

Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
1960's Teisco Del Rey, Model ET-220 "Strat-Style" Electric Guitar. Both original, single coil, "Spectrum" Pickups. Great, original Candy Apple, Metallic color. Bound, Rosewood fingerboard. Laminated maple neck. Separate ON / Off switch for each pickup. Overall Rhythm / Solo tone switch. Volume and Tone control and adjustable truss rod. With the exception of some "Battle Scars" on lower bout of body (see photos) the finish and wood in great shape. Plays and sounds great. Missing whammy bar. Not many finish chips. Very shiny. Frets in great shape with minor, normal wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. Plays and sounds great. We also installed a new set of .010 strings. No case included.
Fender Hot Rod Series Pro Junior III 15W 1x10 Combo - This tube-driven guitar combo with a 10” Eminence vintage-cone speaker reproduces the harmonically complex output and sensitivity to playing synamics that vintage Fender tone hounds love. Dual 12AX7 preamp and EL84 power amp tubes crank out the same celebrated midrange as vintage combos. Fender has updated the Pro Junior III with an external speaker jack, a more legible control panel, and internal tweaks.

The reason why you would want to have one of these on your pedalboard is simple. An EQ pedal allows you to adjust a variety of frequency bands and shape your tone based on your own requirements. As you evolve your skill and knowledge, you will soon realize that you can’t play without a pedal of this type. When it comes to some notable models, Empress ParaEQ comes to mind as the best choice.
Note that most (but not all) tabs don't display the rhythm with which you should play the notes in the tab. They may break the tab into measures (usually signified by vertical lines in the tab between measures, but they won't tell you the rhythm of the notes within the measures. In this case, it's best to listen to the song while you read the tab to find the beat.

1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2 DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.

Twelve-string electric guitars feature six pairs of strings, usually with each pair tuned to the same note. The extra E, A, D, and G strings add a note one octave above, and the extra B and E strings are in unison. The pairs of strings are played together as one, so the technique and tuning are the same as a conventional guitar, but they create a much fuller tone, with the additional strings adding a natural chorus effect. They are used almost solely to play harmony and rhythm parts, rather than for guitar solos. They are relatively common in folk rock music. Lead Belly is the folk artist most identified with the twelve-string guitar, usually acoustic with a pickup.
In 1962 Vox introduced the pentagonal Phantom guitar, originally made in England but soon after made by EKO of Italy. It was followed a year later by the teardrop-shaped Mark VI, the prototype of which was used by Brian Jones of The Rolling Stones. Vox guitars also experimented with onboard effects and electronics. The Teardrop won a prize for its design. In the mid 1960s, as the sound of electric 12 string guitar became popular, Vox introduced the Phantom XII and Mark XII electric 12 string guitars. Vox produced many more traditional 6 and 12 string electric guitars in both England and Italy. It may be noted that the Phantom guitar shape was quite similar to that of first fretted electric bass guitar, the Audiovox "Electric Bass Fiddle" of 1934.
The first electric instrument amplifiers were not designed for use with electric guitars. The earliest examples were portable PA systems, which appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes allowed the production of economical built-in power supplies that could be plugged into wall sockets, instead of heavy multiple battery packs, since rechargeable batteries would not become lightweight until many decades later. While guitar amplifiers from the beginning were used to amplify acoustic guitar, electronic amplification of guitar was first widely popularized by the 1930s and 1940s craze for Hawaiian music, which extensively employed the amplified lap steel Hawaiian guitar.[2]

{ "thumbImageID": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "defaultDisplayName": "Squier Vintage Modified Jazz Bass '70s", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51373037988286", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Natural-1373037988286.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51373037988376", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Olympic-White-1373037988376.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Olympic-White/H99641000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51373037988268", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red-1373037988268.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red/H99641000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The guitar starts off with a basswood body, carved into the familiar Stratocaster double cutaway. Even the pickguard resembles that of a Strat, although the controls are different, with the Adrian Smith SDX just having two knobs for adjusting master tone and volume. While the neck still looks like a Strat, it is meant for fast and comfortable play, with its compound radius maple fretboard, 25.5" scale length, 1.6875" nut width and 22 jumbo frets. Giving this guitar its versatile tones are two single coils for the neck and middle position, along with a humbucker on the bridge, all of which are designed by Jackson with the approval of the Adrian himself.
As discussed, Delay pedals add so much more weight to your sound and gives your guitar a doubling effect, which is really useful to make it sound like there’s two guitars on stage. They’re also great for creating psychedelic sounds and experimenting with riffs. Again, you don’t have to dial in big delay effects and can use the pedal subtly to add resonance.
This Japanese company produces a wide range of musical instruments, but the real draw for guitarists will be with beginners and intermediate players. Yamaha offers a solid selection of products at a price that is more budget friendly than some of the other entries on this guide, making it a good place to start for players getting their first guitar.
In this era, as well, Gibson began experimenting with new models such as the Les Paul Recording. This model is generally unpopular with guitarists due to its complex electronics. The Recording featured low-impedance pickups, many switches and buttons, and a highly specialized cable for impedance-matching to the amplifier. Less noticeable changes included, but were not limited to, maple fingerboards (1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the modern day Nashville Tune-o-matic bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout.
Octave effects take the input signal and produce synthesized tones that are one or more octaves above or below it. They can be blended in with the input signal to harmonize with it in real time. The effect can be synthesized by monitoring the waveform of the input and multiplying or dividing the observed frequency by, for example, 2 (to go up or down an octave) or 4 (to go up or down two octaves). This takes advantage of the fact that tones that are an octave apart have a 2:1 frequency relationship; the frequency of the tone one octave higher than a root tone is always double the frequency of the root tone.

Surprisingly, perhaps, given their reputation for fragility, ribbon mics also seem to be widely used for electric guitar, with models from Beyerdynamic, Coles, RCA and Royer all putting in appearances. Producers using ribbons include Thom Panunzio, Joe Barresi, Steve Albini, Ed Cherney, Bill Bottrell and Butch Vig — Eddie Kramer even goes as far as to say that "to me, the best guitar mic is the Beyer M160, which I've used for 30 years on Hendrix, on Zeppelin, on everybody."
Musicians, audio engineers and record producers use effects units during live performances or in the studio, typically with electric guitar, bass guitar, electronic keyboard or electric piano. While guitar effects are most frequently used with electric or electronic instruments, effects can also be used with acoustic instruments, drums and vocals.[3][4]
 Are you seeking reliable information and or the evaluation of your vintage guitar's actual real world value today?.... JVGuitars has a simple solution and that is a Joe's Vintage Guitars E-Guitar Appraisal and they are only $45.00 per instrument its fast and its painless and will be conducted by email with no need for damage risk or shipping to and from. Help support JVGuitars service today and go ahead and just order your E-Guitar Appraisal NOW!.. We can send a quick Paypal invoice to you for this E-Appraisal and get started.... ORDER YOUR JVG- E-Guitar Appraisal TODAY! email us your request NOW for your Appraisal at 

If you’ve decided to make the neck from scratch, rather than purchasing it, you will want to cut that at this point. Make sure you are following specifications for how it will need to connect to the body. It’s best to cut the basic shape first and then refine.  You also need to hollow out space for the truss rod. Finally, for a rosewood fretboard, you will need to laminate the board to the neck.
{ "thumbImageID": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "defaultDisplayName": "Ibanez GSR200 4-String Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pearl White", "sku": "sku:site51275776902009", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Pearl-White-1275776902009.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776901776", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Jewel-Blue-1275776901776.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Jewel-Blue/519524000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Red", "sku": "sku:site51275425410355", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Transparent-Red-1275425410355.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Transparent-Red/519524000016000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901322", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Bass-Black-1275776901322.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Black/519524000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
A few months ago, I decided that enough was enough, so I began to trawl systematically through Sound On Sound's interview archive, collating and comparing different producers' views on a variety of recording and mixing topics. Being a glutton for punishment, I also waded through the 35-odd interviews in Howard Massey's excellent book, Behind The Glass.
Simple answer is, if you have money for the higher end of Taylor, buy a Collings. I've been working as a repair tech in a store that stocks Taylor for around 5 years. Went to lutherie school under one of the best guitar builders in the country. I've played dozens of examples from nearly every model range Taylor has to offer, as well as a few of the more limited edition high $$$$ range. I will give credit where it is due, on the USA made models fit and finish is above many other brands.
Whoa whoa wait, what? This pop artist? A guitar player? If all you’ve ever heard from Mayer is Your Body Is Wonderland, or Daughters, then you’ve got to give his album Continuum a listen to. He is no Shakespeare, but his guitar playing speaks to your soul. His songs will make most glorified tough guys miss their old girlfriend, and the rest just go to a corner and cry. If you think that his songs are all too depressing, then watch some videos of him playing. His guitar face is priceless.

000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.

It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
Washburn is an EXCELLENT brand. I have owned an N4, 2 N2's, and their latest, cheapest Nuno model for my daughter. My daughter's guitar is amazing for the price I wish I had such quality for my starter guitar. I would put my N4 up against ANY guitar- period. Plus, whenever I have contacted the company, they have top notch customer service. I know this isn't about amps, but I wrote them about an issue I had with my Randall amp ( a division of Washburn). Without me asking, they mailed me an amp part with an apology. Top notch.
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]
If you see "PM," play using palm muting. For standard right-handed guitar playing, gently lay the edge of your right palm across the strings near the guitar's bridge. When you strike the notes (with the same hand as is providing the mute), you should hear the tone of the note, but with a subdued, dead quality. Move your hand slightly up the strings toward the neck to deaden the notes more.
The herringbone purfling (binding) was discontinued on style 28 guitars in 1947. The binding was made in pre-World War II Germany and was not replaceable from American sources. When the stockpile ran out in early 1947, D-28s (and all style 28 guitars) were bound with a new decoration scheme of alternating black and white celluloid (originally used on the Martin archtop C-2 model). Hence the term "herribone D-28" or "bone 28" is heard amoung Martin collections, signifying a pre-1947 style 28 Martin guitar.
The “quacky” tone of the middle and bridge pickups, popularized by players such as David Gilmour, Rory Gallagher, Mark Knopfler, Bob Dylan, Scott Thurston, Ronnie Wood, Ed King, Eric Clapton and Robert Cray, can be obtained by using the pickup selector in positions 2 and 4. The neck and middle pickups are each wired to a tone control that incorporates a single, shared tone capacitor, whereas the bridge pickup, which is slanted towards the high strings for a more trebly sound, has no tone control for maximum brightness. On many modern Stratocasters, the first tone affects the neck pickup; the second tone affects the middle and bridge pickups; on some Artist Series models (Eric Clapton and Buddy Guy signature guitars), the first tone is a presence circuit that cuts or boosts treble and bass frequencies, affecting all the pickups; the second tone is an active midrange booster that boosts the midrange frequencies up to 25dB (12dB on certain models) to produce a fatter humbucker-like sound.

225 Parsons St, Kalamazoo, MI, 49007 1917–1984 Also located next to railroad tracks, this facility had major expansions in 1945, 1950, and 1960.[83] Various brands were produced there, including Gibson, Epiphone, (1957–1970)[84][85] and Kalamazoo. During the depression of the 1930s, children's toys were produced there, and during WW2 it produced materials to support the war effort in addition to producing guitars.[86] Between 1974 and 1984 Gibson moved its manufacturing out of this facility to Tennessee. Most of this move happened in 1974, leaving only acoustic and some semi-acoustic production for this plant.[87] In 1985, Heritage Guitars began production, renting part of this facility.[88]

The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.

More theory: pickups have a couple of properties, namely phase and polarity. Depending on whether the pickups are in or out of phase and polarities are reversed or not, pickups can have properties such as hum canceling (this is utilized by humbucker pickups) hollowed-out sounds where out of phase pickups cancel out certain frequencies. Pickups also have output ratings. Higher output pickups generate hotter signals, and usually are less glassy. This is why guitarists prefer high out put pickups for rock and metal and others prefer low or medium output pickups. That is also why guitars in hard rock sound midrange heavy and other electric guitar styles have glassy and bright sounds.

The Professionals - just like the Standards before them - are designed to appeal to a wide range of players with a wide range of styles - which makes this Strat one of the best electric guitars available. The major difference between these new styles, however, is the new single-coil pickups. The basic premise lies in using different rod magnets for the treble and bass sides of the pickups from a choice of Alnico 2, 3 and 5. All the Strat pickups use 42 gauge Formvar wire and are calibrated for their positions, plus the centre pickup is RWRP so the parallel mixes are hum-cancelling. The new neck shape here isn't hugely different from the ubiquitous modern 'C' of the previous Standards; it's marginally deeper back- to-front with a subtly fuller shoulder. Plugging in, this is a modern, clean-voiced Strat that almost sounds like it's been 'produced' to maximise its Strat-i-ness. Where are you going to take it? We find ourselves driving in a slightly different way, pulling back the tones a little to lose some of that edge for rougher tones, while the treble bleed cap keeps things bright as we knock back the volume and hit the pop/funk button.
Great condition. With the exception of the gold foil missing from the back pad, allowing the pink to show thru, the guitar is entirely original. Has a couple of small spots of edge wear, and a chip on the front, the size of this 'o'. Plays and sound fine. Has correct amount of neck relief (.010") at the 7th fret, when fretted at the first fret and the body fret. Includes original chipboard case.
Ultimately, if you’re mostly playing rock, heavier blues, or any shred or metal styles, you might prefer jumbo or medium-jumbo frets. However, for country, rockabilly, surf, or old-school ’50s rock and roll, narrow frets could be the way to go. In any case, though, if your frets are in good condition and your guitar is set up right, the size of that wire in and of itself shouldn’t stop you from sounding great on whatever you play.
These 8 free guitar lessons are from Chris Buono’s 60 Electric Guitar Techniques You MUST Know where he’ll describe and demonstrate 65 of the most popular electric guitar techniques found in blues, rock, jazz, metal and other contemporary genres of music. He also shows you how they’re notated in standard notation and tablature to help you get the most out of reading or writing sheet music, tabs, and charts.
The Professionals, just like the Standards before them, are designed to appeal to a wide range of players with a wide range of styles. These are not for vintage obsessives. Most of the changes are relatively subtle: a new 'modern deep C' neck shape; new narrow/tall frets; and the Teles revert back to three (compensated) brass saddles over the previous six Strat-style saddles. Both single coils here use Alnico 5 rods on the bass side and Alnico 2 on the trebles and we have a treble bleed RC network on the volume. A basic trio of sounds shouts 'contemporary Tele' from the biting harmonically rich honk of the flat- pole bridge, through the wider, less quacky pickup mix, to the less hard-hitting but not soft neck voice. It's like someone has EQ'd the sound to balance and maximise its Tele-ness. There's a very lively ringing resonance, too: all the planets seem to align, the maple neck/alder body perhaps pulling down a little edgy spike, while those brass saddles - not to mention the through-body stringing and the more classically voiced pickups - combine to create what seems like a modern Tele in spec but one that has plenty of classic, vintage reference.The colour/wood choices are wide and the subtle improvements to the build - on an already very well proven chassis - make a noticeable change, not least the new neck shape and the taller fretwire. Yes, we've played thicker, beefier-sounding Teles, and thinner, brighter ones, too, but as a foundation tone, which also includes a very smart and practical, lightweight moulded case, it all becomes a bit of a no-brainer.
The primary means of identifying the model number of Kent guitars is via a label on the back of the headstock. Through the years many of those labels have fallen off or been peeled off. They do not add anything to the appearance of the guitar. The 700 and 800 guitars had a round foil sticker with the model number and sometimes serial number pressed into it, kind of like Dymo tape labels. The look a lot nicer than the white paper one used on earlier models, but they still can fall off over the years, and they are harder to read.
The F-50 was the bottom of the line, a single cutaway with a single DeArmond humbucker pickup, like those on the previous acoustic hybrids, in the neck position. Controls were one volume and one tone control mounted along the edge of the lower treble bout, with black, chrome-topped knobs. This had a trapeze tailpiece with a sort of Cabinet of Dr. Caligari “M” cutout of the center. This was finished in a brown to yellow two-tone sunburst. The first prototype bore the serial number 179828. 1,165 F-50s were built from the middle of 1962 to the spring of 1965.
I've owned and played Martin, Ovations, Fender, and Gretsch acoustics but none has thrilled me more than the Breedlove Concert Pursuit with cedar top. The tone is definitely different - so balanced and the midrange really shines. Absolute joy to play despite this is not their top line. Not so much a strumming guitar - shines when finger picked. Last but not least, the tone when plugged in is so deep and warm it astounded me. Far better than the others I've had.
Standard tuning but with the 6th string dropped one full step. Utilized by bands and/or artists: Radiohead, Avenged Sevenfold, Arrowmont, Kvelertak, Led Zeppelin on "Moby Dick", Jack White on the song "High Ball Stepper", Rage Against the Machine, Prayer for Cleansing, Lamb of God, Underoath, Evanescence, Silverchair, Muse, Skillet, Helmet, Soundgarden, Metallica on songs "All Nightmare Long" and "Just a Bullet Away", Rammstein, Fugazi in some songs, Tool in all their albums (except Prison Sex which is Drop B in standard variation Tuning and Parabol/Parabola which has E dropped to B and A dropped to E), C3 Church on their song Breathe, as well as numerous songs on older albums Stone Temple Pilots in some songs, Audioslave, Filter, Foo Fighters, Porcupine Tree, Incubus in some songs, Guns N' Roses on the title track and "Better" from Chinese Democracy (most of the rest of the album was in E♭ tuning), Black Veil Brides (on the song "Knives and Pens"), The Devil Wears Prada, Nirvana in some songs, Zakk Wylde in some of his projects, Quicksand, Alesana, Eyes Set to Kill, and The Beatles on "Dear Prudence", Iron Maiden on "If Eternity Should Fail", Jorma Kaukonen of Jefferson Airplane on Embryonic Journey from the Surrealistic Pillow album, All Time Low on the biggest part of their discography.
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.

All six strings are made from nylon, or nylon wrapped with metal, as opposed to the metal strings found on other acoustic guitars. Nylon strings also have a much lower tension than steel strings, as do the predecessors to nylon strings, gut strings (made from ox or sheep gut). The lower three strings ('bass strings') are wound with metal, commonly silver-plated copper.
{"eVar4":"shop: books sheet music and media","pageName":"[gc] shop: books sheet music and media","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"books, sheet music & media","prop5":"[gc] shop: books sheet music and media","prop6":"[gc] shop: books sheet music and media","prop3":"[gc] shop: books sheet music and media","prop4":"[gc] shop: books sheet music and media","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

"Vintage" fretwire is most usually known as "medium" fretwire and that size in today's measurements is usually .080-.040"; what you would see commonly on a Fender RI or Martin acoustic.  I mention this as fretwire does vary and some "vintage" wire back in the day on the guitars was as narrow as .070".  It is commonly referred to in Dunlop numbers as 6230.
My 5056 has pretty high action on it, and these guitars are very bad candidates for neck resets, as the necks were glued with epoxy, not hide glue (which can be softened with heat). Anyone who looks at buying a vintage Alvarez should bear this in mind if the action is high. There may be no practical remedy (Search web for comments on it.). And those who own them should probably stay away from heavy string gauges, i.e., not bigger than .12's on high "E". I now de-tune my Alvarez guitars when I put them away for longer period storage even though I use 11's on them. If you do use heavier gauge strings, you might want to de-tune when putting away the guitar. Just a suggestion. Cheers.
Fender is an American company founded by Clarence Leonidas Fender in the year 1946. The company headquarter is located in Scottsdale, Arizona, United States. The company provides a wide range of guitars to customers at an attractive price range. The company is best manufacturer of amplifiers and stringed instruments and has become the leading guitar brand in India too. - Musical-instruments-Online

{ "thumbImageID": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "defaultDisplayName": "Yamaha GigMaker Acoustic Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115034173", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Natural-1274115034173.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115034083", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "285.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst-1274115034083.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

A comparable alternative at a fraction of the price to the Axe-Fx (which also made the list), the Line 6 Pod HD Pro offers a ton of amp models and effects within it’s 2U rack interface. With over 100+ premium effects, 16 different cabinet models, and even eight microphone models, the Pod HD Pro gives you complete control over every aspect of your tone. All of this is complimented by an intricate display that lets you know exactly what your virtual signal path is. Add the ability to use a mic, bass, or your Line 6 Variax guitar for recording or live scenarios, and you’ve got the best of every realm of music-making at your fingertips. Oh, and to answer the most important question: Does it djent? Yes.
An equalizer adjusts the frequency response in a number of different frequency bands. A graphic equalizer (or "graphic EQ") provides slider controls for a number of frequency region. Each of these bands has a fixed width (Q) and a fixed center-frequency, and as such, the slider changes only the level of the frequency band. The tone controls on guitars, guitar amps, and most pedals are similarly fixed-Q and fixed-frequency, but unlike a graphic EQ, rotary controls are used rather than sliders.

This list is insanely bad! First of all, John Mayer is only as good as your typical high school amateur. And before anyone starts spouting off, I’ve tried to find some obscure videos of him to prove myself wrong. But I can’t, it’s all Minor Pentatonic stuff with nothing innovative added to it. Secondly, how about some finger pickers on the list: Doyle Dykes, Scotty Anderson, Chet Atkins, Merle Travis, Tommy Emmanuel. Let’s not forget DANNY GATTON the greatest guitar player you’ve never heard. Also, if we’re talking about the best of the best, BRENT MASON should ALWAYS be in a Top Ten list, although he never is. But, you’ve heard him on all sorts of Nashville recordings. Acoustic guitar players like Andy McKee, Ewan Dobson, Don Ross, (I wish I knew more than that but I only recently discovered their Chuck Norris like awesomeness). Never limit yourself to the mainstream! There are many guitar players that are mentioned only because they are famous and have influence because of that. They may come up with a catchy riff or played in a well known band. But, that doesn’t make them a truly great guitar player.
I went to my local guitar store, and tested every one on the wall (under $1,000). I narrowed it down to two (the Ovation acoustic-electric of the same caliber, and this Yamaha FGX800C). In the end I ordered this guitar because of the excellent price on the "package" deal (hard case, strap, tuner, etc.). It sounds fantastic, stays in tune very well, is comfortable to play, and no "buzz". My limit of 4 stars is due to; 1) The strap is garbage...get a new one if you play with a strap. 2) The guitar only has a strap post on the rear of the instrument (it also doubles as the connection for the amplifier cord), and there is none on the front. You have to tie a string ahead of the nut. That gets in the way of the tuning and fingering of
Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.
Brian Moore - Known for their innovative custom electronics and distinctive designs, Brian Moore Guitars continue to produce guitars that go beyond the conventional. Aside from their custom-built instruments, they now carry a host of artist signature models. One of their more popular products is the iGuitar, which feature acoustic MIDI, piezo, 13 pin Synth and more.
Clear and easy to follow instructions. I re-wired my Gibson Les Paul 60's Tribute for new pickups after removing the easy connects and circuit board that came stock. I ended up re-using the 3 way switch that came in the guitar instead of the one in the kit since it was shorter and the guitar didn't have room for the full length switch in the kit. They were both Switchcraft so same quality. I'm very happy with the results. After shopping prices, the kit is very reasonable versus buying the components separately.
For this list and those below we are including both new and used sales data. It's also worth noting that we did not combine multiple variations of the same amp like different wattages or cabinet speaker sizes, or the head and combo versions of the same amp, which we consider to be distinct models. We did, however, combine things like different tolex color and other minor cosmetic variations where applicable.
Even now i make people custom guitars and have made a few for people in MO/IL a total of 23 made and they all love them and say they are the best guitars theyve played cause i work side by side to shape the guitars necks and bodys to fit most comfortably with them but i charge $2500-3000 for a guitar which is still cheaper than the big name guitar places
This vintage Teisco Del Rey Japanese guitar was made in the 1960s and has a classic sunburst finish and tulip shaped body. Manufactured in Japan by the Tokyo Electric Instrument and Sound Company (yeah, you got it…TEISCo!), the Del Rey measures 37 3/8 inches x 11 1/4 inches at widest and longest points. The fretboard measures 18 3/8 inches in length from the nut to end. My dad bought this one from some guy at his work, who later supplied him with the original whammy bar and headstock hardware which he found later! The relatively small body size of the Teisco Del Rey was appealing to my wife, who was on the lookout for a smaller-sized guitar she could play. My dad replaced the original tuning pegs with much nicer chrome ones from a 1980’s Gibson SG and we took it home. However, she realized that she didn’t care much for electric guitar, so we decided to clean it up and sell it. Everything was in excellent shape, but it did have some electrical issues. The volume/tone pots were filthy and you could hear a wall of white noise as you turned the knobs. At the time, I didn’t know the marvels of Deoxit and contact cleaners, so I didn’t know how easy it would have been to clear that problem up. One of the pickups or pickup selectors also didn't seem to be working. It played OK without noise or distortion when the volume and tone knobs were set to 10 and the pickup selectors set to "black up, white down", but the sound could still fade in and out sometimes if you bumped the buttons or switches the wrong way. Again, simple issues that I could have cleared up with a soldering iron and contact cleaner. In any case, we meticulously cleaned it and put it up for auction. Despite the minor problems, a bidding war ensued and now this Teisco Del Rey Japanese guitar lives in Australia! Overall, the Teisco is a good playing trashy guitar with loads of funky style. Scroll down for more Japanese Guitars from our collection!

If you are not attracted to the way the guitar looks or feels in your hand, chances are you won't be too eager to pick it up every day. When you are just starting out, this is supremely important. Here's where a disclaimer needs to be placed. This isn't always the case, and often times people warm up to a guitar even if they didn't initially like it, but why chance it?
In terms of the electronics, Yamaha went with a System 66 piezoelectric platform. The preamp packs a standard three-band EQ couple with a built-in tuner and a flexible mid-range control. Needless to say, it gives you more than enough room to dial in a decent tone. Quality-wise, this might be the best acoustic electric you can get in this price range, period.

A chorus effect alters the duplicated waveform in a more subtle, nuanced way. The altered waveform will sound much like the original, but just different enough to sound like multiple voices playing the same note or notes. As it is usually applied, chorus sounds like the same signal running through two amps with a very slight delay between them. In fact, Pat Metheny's famous chorus sound is produced in exactly this manner, using no actual chorus effect at all.

"Vintage" fretwire is most usually known as "medium" fretwire and that size in today's measurements is usually .080-.040"; what you would see commonly on a Fender RI or Martin acoustic.  I mention this as fretwire does vary and some "vintage" wire back in the day on the guitars was as narrow as .070".  It is commonly referred to in Dunlop numbers as 6230.
Among other things, Peavy is somewhat famous in the guitar amps world for being one of the first manufacturers to produce a close-to-tubes type of sound from their transistors amps. While this achievement might not have seemed perfect for the most discerning of ears, their solid state guitar amplifiers are good enough for the general public not to tell the difference.
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
This guitar is based on Loar's U. S. Pat. 2,020,557 (filed 1934, awarded 1935), in which electric amplification is combined with an acoustic guitar body. The design offered a player the option of switching between electric and acoustic amplification, or combining both, with metal posts through the bridge that transfers vibrations from the strings to the bar-armature. With the posts raised, the bridge comes in contact with the soundboard for exclusively acoustic amplification; with the posts lowered to contact the metal bar-armature, both acoustic and electric amplification is engaged, and with the posts lowered completely, the bridge is lifted off of the soundboard and supported only by the bar-armature for exclusively electric amplification. The back of the guitar, made from arched spruce, with two f-shaped soundholes, incorporates another of Loar's ideas, covered more extensively in U. S. Pat. 2,046,331 (filed in 1934 but awarded in 1936), to use the back of the instrument as a second soundboard by transferring bridge pressure from the top.
Solder the electronics. The pickups you purchased should come with a schematic that shows exactly how to connect these to the controls and to the input for the guitar cord. Follow this schematic, using an ordinary electronics soldering iron to complete the job. Wrap any wiring connections with electrical tape, unless the manufacturer’s instructions suggest another method.
@Timothy Chew – This really depends on the specs of your effect and volume pedals. A buffer should be placed 1) before long cable runs, 2) in front of low input impedance pedals, or 3) in front of many true bypass effects. If your volume pedal has a high input impedance, I would recommend placing it near the front of your signal chain. If the Volume pedal has a low input impedance, I would recommend placing it after the buffer. Again, this really depends on how you plan on using the volume pedal and whether the one you have has the right spec for that usage.

Hi Paul, sorry you’re having trouble. If you’ve got one of the ‘import’ type switches described above you have 8 contacts (lugs). The “5 positions” are the 5 resting positions the switch lever can be set to (which correspond to your 5 possible pickup selections). You need to get the hang of switches before you attempt to rewire one of these so if the idea of a 2-pole 3-way switch doesn’t make sense then you should probably put the soldering iron down and look for a local guitar tech who can help you, your local guitar shop is a good place to ask.
Eric Patrick Clapton, CBE, is an English musician, singer-songwriter and guitarist. He is the only three-time inductee to the Rock and Roll Hall of Fame: once as a solo artist and separately as a member of the Yardbirds and Cream. Clapton has been referred to as one of the most important and influential guitarists of all time. Clapton ranked second in Rolling Stone magazine's list of the "100 Greatest Guitarists of All Time" and fourth in Gibson's "Top 50 Guitarists of All Time". He was also named number five in Time magazine's list of "The 10 Best Electric Guitar Players" in 2009 In the mid-1960s, Clapton left the Yardbirds to play blues with John Mayall & the Bluesbreakers. Immediately ...more on Wikipedia
Tremolo is the gentle art of making your signal subtly cut in and out of volume. Think of all those old surf records. Phase and flange are quite similar in essence; phase emulates the sweeping of the frequency band, alternating between cutting the bass and treble frequencies, while flange does a similar thing but with a slightly more extreme sound. Wah is perhaps more well known; the Jim Dunlop Cry Baby wah pedal has been used for decades by players of all genres. Adding a highly distinctive wah-wah sound can elevate a solo into something infinitely more interesting. Or it can add a bit of that classic wakka-wakka sound you hear on classic funk records.
Hello. If any of you who have a dorado guitar would like to sell it, please email me ( I am always looking for cool vintage guitars. I am a big fan of the Gretsch name and have found the Dorados to be very nice guitars. I don't check follow ups much, so you'll have to email to get in touch with me. Put "Dorado" in the subject because I get a lot of spam and tend to get crazy with the delete button. Thanks :)
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!
A selection of makers within the high-end, hand-built crowd of today do offer variations on the opamp-based template discussed above. Blackstone Appliances bases its Mosfet Overdrive on a discrete transistorized circuit centered around, yes, mosfets, and Klon’s Centaur pedal uses… well, who the hell knows? They cover the entire circuit board in epoxy goop to keep the cloners at bay, but this expensive overdrive certainly sounds different. Other popular boutique overdrives are found in the Barber Electronics LTD pedal, the Crowther Audio Hot Cake, and the Fulltone OCD.
MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
My favorite guitar effect is Tremolo with a touch of echo. This works well on songs with slower melodic guitar leads and slower rhythms. Tremolo is an effect that has a speed adjustment and amplitude adjustment. The speed needs to be adjusted to the song tempo. This was popular for many songs written in the 1950’s. If you are a guitar shredder you will not be happy with this effect. I have a Boss Guitar Pedal and Line 6 Pod XT and use this effect from the pedal. I am not crazy about software generated effects as there is not enough space on stage for all the equipment and adding a MacBook and keeping it from getting knocked around would be too difficult. After recording I have used Garage Band and this software is easy to use. I probably have four or five software packages and they are too overwhelming at times. I have given up trying to figure out how to use the software with my expensive Presonus 24 track digital AI Board. It is almost impossible to use these recording software packages without having expensive school training.
Selling my guitar rig i used here in RSA Not splitting up 1 x tech 21 sansamp psa1.1 preamp,studio standard 1 x crate Powerblock 150w mono or 2x 75w stereo amp 1 x 4x12 quad box,custom built with plywood not cheap chipboard, loaded with celestion G12s All as good as new Too heavy to ship overseas Can swop for something lighter i can carry on a plane

Ovation Guitars, in conjunction with the DW Music Foundation (DWMF) will debut the RS Rockstar™ guitar. This six-string, “RS” model guitar will be donated to each Notes for Notes location along with a DW drumset and an LP cajon to equip each studio with professional level musical instruments. The DWMF will also work with other partnering charities to donate RS Rockstar™ model guitars to music education programs in underserved communities worldwide.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"classical & nylon guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”
The Professionals, just like the Standards before them, are designed to appeal to a wide range of players with a wide range of styles. These are not for vintage obsessives. Most of the changes are relatively subtle: a new 'modern deep C' neck shape; new narrow/tall frets; and the Teles revert back to three (compensated) brass saddles over the previous six Strat-style saddles. Both single coils here use Alnico 5 rods on the bass side and Alnico 2 on the trebles and we have a treble bleed RC network on the volume. A basic trio of sounds shouts 'contemporary Tele' from the biting harmonically rich honk of the flat- pole bridge, through the wider, less quacky pickup mix, to the less hard-hitting but not soft neck voice. It's like someone has EQ'd the sound to balance and maximise its Tele-ness. There's a very lively ringing resonance, too: all the planets seem to align, the maple neck/alder body perhaps pulling down a little edgy spike, while those brass saddles - not to mention the through-body stringing and the more classically voiced pickups - combine to create what seems like a modern Tele in spec but one that has plenty of classic, vintage reference.The colour/wood choices are wide and the subtle improvements to the build - on an already very well proven chassis - make a noticeable change, not least the new neck shape and the taller fretwire. Yes, we've played thicker, beefier-sounding Teles, and thinner, brighter ones, too, but as a foundation tone, which also includes a very smart and practical, lightweight moulded case, it all becomes a bit of a no-brainer.
Finally, have you ever heard a definitive answer to the question “how long does it take to learn guitar?” Us neither! Learning your first chords can take a few hours, but the instrument can take a lifetime to master. But that’s the joy of playing guitar – you never stop learning. It’s down to you to practise and progress, because practise makes perfect!
Many guitarists have chosen this iconic axe for its versatility and capability to sound great in any genre of music, but the Les Paul is most widely known for its heavy duty rock ‘n’ roll vibe.  A great example of this would be Jimmy Page of Led Zeppelin fame.  Once Page began using Les Pauls, he never looked back and helped to give the instrument its indelible place in the history books of music.

As stated previously, the closer 2 coils are to one another, the greater the cancelations will be when they go "out of phase". So, wiring a humbucker out of phase with itself is going to produce a lot of cancelations, a huge reduction in volume and a very thin sound. If that's not enough, the pickup will not be humbucking either. Still there are some people that like this kind of sound. The best way to put a humbucker out of phase with itself is to wire the coils out of phase in series. (see below)
Bottom Line: The Boss ME-80 seems to be aimed at the beginner and intermediate guitarist who is getting into the effects game. What guitarists love about it is that it tries hard (and succeeds) at replicating the feel of messing with a pedalboard full of effects. Unlike the Line 6 POD HD500X, you won’t need the manual! We’re not necessarily taking a dig at the Line 6 pedal - that one very much has its merits, is FAR more customizable and editable, and arguably the effects and amp modeling sound a bit better. The Boss ME-80 is just a different style, and judging by the user reviews we read people really enjoy having all the knobs for all the effects immediately available. The Boss ME-80 is also a tremendous bargain considering how powerful it is. Sure, it’s not exactly cheap, but it’s a very well-made, intuitive, nice-sounding all-in-one multi-effects pedal which is great for practice, studio recording, and live use.
The style of music you prefer will greatly dictate the type of guitar you want, so it is safest to stick to the guns (or axes) of your heroes. This way you can get a good and inspiring instrument even when you don't have thorough knowledge of guitar types. For experienced players, you owe it to yourself to understand the pros and cons of different guitar types better, before making big investments. But even then, your preferred style, and the recommendations of experts and professional guitar players that play them will be invaluable.
From guitar faces to the different kinds of axes, here is the Top 10 Greatest Guitar Players. Squeezing the talent that’s blessed our ears for all these years into a list of 10 is just as difficult as choosing which limbs to lose or keep. The list is by no means definitive, but it’s an accurate representation for the uniqueness of the music the guitarist has made. In short, these famous guitar players have played the melodies that have made grown men cry, and probably gave you a taste of how your guitar face would look like pretending to play that solo. Of course many great guitarists may not have made this top 10 list, but feel free to add your own favorites in the comments.
In 1969 MCA closed the Danelectro plant. This was blamed on MCA's shift to selling instruments to individual guitar stores instead of jobbers (such as Sears). At this time, Dan Armstrong bought most of the remaining parts, and continued manufacturing Danelectros through Ampeg. These instruments had single cutaway bodies with one humbucking pickup (not lipstick tube pickups), and no brand name on the peghead. Apparently Ampeg was having problems with the production of the see-thru Dan Armstrong guitars. In the interium, Armstrong sold the remaining Danelectros through Ampeg until the Dan Armstrong guitars were fully available.

A tung oil-finished rock maple neck, and a slightly more curved fretboard radius of 13.75 inches are the other small modifications to the ‘speed’ features on the MD200. However, it has a thinner bolt-on neck as compared to the MD400’s wider mahogany set neck. That said, both neck profiles remain a shallow “C” shape, and the guitars’ dramatically beveled cutaways give you ample room to reach the high notes.
Instead of thinking about the different woods (mahogany, maple, rosewood, etc), all the different pickups, necks, scale lengths, bridges, body types… all you have to worry about is getting the STYLE right. 95% of the time, that will get you the SOUND you want as well. Of course, that being said, get the highest quality wood you can. For example, most players agree that a “solid sitka spruce top” is probably the highest quality wood you can get for a “beginner” level acoustic guitar, without compromising tone.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
Monte Allums Mods – Tweaking the tone of inexpensive stomp boxes is an obsession of Monte Allums. He started modding mainly because he refused to spend $200 to $300 or more to achieve great tone. Monte believes that most expensive boutique pedals are simply clones of inexpensive pedals, but upgraded with higher-quality components. So his mods and kits feature classic designs with better components to deliver superior tone.
The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place...  Click To Read More About This Product
A simplistic design and an affordable price make the Squier Bullet Stratocaster SSS an ideal guitar for those who are just beginning their foray into the musical world. Here’s a huge drop in price and mentioned halfway in our list just in case you wanted to find a budget-friendly and cheap electric guitar to start with. With a basswood finish and a ‘C’ shape design, this electric guitar is lightweight and comfortable, making it ideal when just beginning to learn basic chord progressions and needing long periods of time to practice. The twenty-one frets that are included come in a medium-jumbo size, making it easier to learn the basics of strumming and moving from chord to chord. The string pickup is only a single coil, which provides an adequate sound and balanced tone when utilizing the 5-position pickup blade. With three different color options to choose from (Candy Apple Red, Sea-foam Green, and Lake Placid Blue) the Squier Bullet is one of the best electric guitars for those who are looking to begin their musical journey in style.
Designed in collaboration with the legendary Guns N' Roses guitarist, this limited-edition Slash Firebird won't last long. After all, as Slash himself says, "Who doesn't want a Firebird?" Limited to a production run of just 900, worldwide, this version of the iconic guitar combines tradition, like the reissue Kluson banjo-style tuners, with some of Slash's signature touches like the Seymour Duncan Slash signature Alnico II pickups and flame maple top. Great for rock and blues, don't miss your chance to snap one of these up. Case sold separately.

Fretsizes can be confusing.  They are small measurements but have a big impact on feel and the size designations can vary.  Its best in my opinion to think and talk of frets in their actual crown widths and heights rather than the old Dunlop numbers (the originator of the 6xxx numbering system) as they can mean different things to different people; i.e. Warmoth lists 6105 as .095-.047" while USACG has is at .090-.055" - these are two very different feeling fretsizes. 
Certain aspects of this thicker sound can only be achieved by using a bigger gauge of string.  Pat Martino, Stevie Ray Vaughan, and other guitar masters are a testament to this philosophy.  A bigger string will offer a bigger sound, if we are willing to make sacrifices in other areas.  Again, these sacrifices may be negligible depending on your genre.
Bowers loves combining incredible chops with strong melodies, and his influences read like a “Who’s Who” of guitar heroes. Included are such high-tech players as Steve Morse, John Petrucci, and Steve Howe. While talking with Frank, I learned that he has had two of his Les Pauls customized to accommodate a push-pull tap switch on their tone knobs. In the normal position he has full control of his Seymour Duncan humbuckers; in the pulled-up position he goes to a single coil “spin-a-split” configuration that allows him to get more of a “Tele” tone at zero—or he can dial in a bit more of the other half of the pickup to emulate more of a P-90 sound. The thinner “Tele-ish” tone cuts better, allowing more clarity on his leads and rhythm patches.
Once the old selector is removed, screw the new selector in place. Follow your wiring notes from the old pickup selector, strip the wires with a pair of wire strippers, and solder the wires to the correct lugs. After everything is soldered in place, reattached the cavity cover or pickguard. For more information about how to solder wiring, see the soldering page.

This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.

Next up, Tolerances. The tolerance refers to the accurate rating of the pots ohm, so if it's a 250k pot, then it will be accurately rated at a tight tolerance of around +/-5% to 250k, a true rating. Some low quality pots can creep wildly away from the ratings, you'd be surprised. I've removed CTS pots from US and MIM Fender guitars for example, that were incredibly inacurate. 250k stamped pots that were not even 200k, and also in other cases past 300k. So, why does that matter? Well if for example we're referring to a single coil equipped guitar like a Stratocaster, they recommended a pot ohm value of 250k in both volume and tone positions. If a lower quality pot states 250k but actually reads much lower, perhaps 200k, or even substantially higher, it could result it a darker or brighter tone respectively, than what would bring out the best in the guitars pickups. Quality pots like the CTS 450 series or TVT I have come to trust, have super tight tolerances, +/- 7% and most cases even tighter +/-5%. This accuracy is worth it, a pickup manufacturer sets out to design a certain model of pickup that will sound it's 'best' (obviously this is subjective), optimal is probably a better word, for a certain pot rating. If you're fitting a harness with tight tolerance, accurately rated pots then chances are you're going to be getting the best from your pickup set. That's the important bit for me.
Having perfected the modelling amp concept, Line 6 have become experts at delivering a huge variety of great sounds in a convenient, affordable package. Experiment with 12 different amp models, from classic 1960s Fender tone to the “Insane Red”, inspired by the mental Mesa/Boogie Dual Rectifier, and sculpt your tone further with the seven built-in effects.

EQ pedals do exactly what you would think.  They allow you to set the tone of your sound through equalization.  Just like on your radio, they can adjust the bass, mid, and treble frequencies of your tone.  Depending on the type of EQ stompbox you have, you may have different ways of tailoring your tone.  There are two main types: graphic and parametric.

In 1966 Vox introduced the revolutionary but problematic GuitarOrgan, a Phantom VI guitar with internal organ electronics. The instrument's trigger mechanism required a specially-wired plectrum that completed circuit connections to each fret, resulting in a very wide and unwieldy neck. John Lennon was given one in a bid to secure an endorsement, though this never panned out. According to Up-Tight: the Velvet Underground Story, Brian Jones of the Rolling Stones also tried one; when asked by the Velvets if it "worked", his answer was negative. The instrument never became popular, but it was a precursor to the modern guitar synthesizer.
Humbuckers use two magnets, one which works as a pickup and one which cancels out 60-cycle hum (hence the name humbucker). These pickups generally have a darker voice and a higher output, which allows them to perform better under high levels of distortion. These pickups also tend to sound better playing jazz, as the genre benefits from the darker voice these pickups provide.
Fast forward a few hundred years to the world of guitar pedals. The first registered portable effect pedal for guitarists built in 1941, called the DeArmond 601 Tremolo Control, was a clumsy toaster oven-shaped unit with a heavy granite-like exterior. The tremolo effect worked by reducing the signal from the guitar several times a second through an electrolytic hydro-fluid located in a glass canister inside the unit. When activated, the main voltage motor rapidly shook the canister, causing the fluid (water, windex, and even mercury) to stir and splash against the pin and the guitar signal to ground, creating a “watery” tremolo sound.
DR Strings makes strings that were specifically designed for drop d tuning, other alternate tunings, and even standard tuning. Known as DDT strings, DR spent over two years perfecting them. DR created a new patent pending method for constructing these strings to ensure great performance with lower pitches. Because of the amazing construction, and their ability to quickly lock into tune so quickly, DR calls their DDT's "Superstrings". Why not try a set? DDT's are available for electric guitar or bass guitar.
JHS distributes them and they get really over the top cheesy reviews in the free magazine "gear" which is really just a JHS catalogue. Their endorsers include lists of "has beens" and "up and coming next big things". Trev Wilkinson no doubt has some good designs but gets more credit than he deserves for some of these copies. I've seen a few in the shops, and they range from not bad looking to absoloubtly terrible. I think they're very inconsistant, some I've picked up had very sharp fret ends.
FINISH DRILLING THE HOLES After you have shaped and carved the body and the neck holes are drilled and the cavities routed out, you can preposition all of you parts and drill the last of the holes. Start with the pickup rings. It is good to assemble them first and then drop them into the cavity so you can line them up and mark where you will need to drill. Make sure they aren't crooked when you line them up. I like to have the neck bolted on so I can line them up with it. I do the same thing with the bridge. Be sure to check that the scale length is correct and that it is lined up with the neck as well. Drill the holes for the mounting screws and then the string through holes. Try to keep the drill as straight as possible when you do this because you will be going all the way through the body and if they aren't straight you will see it on the other side. This is the time that I wish I had a drill press.
Freshly Realeased from the JVG Vintage Vault..... Just serviced with fresh set up & cosmetic clean up remove grime etc, lube & adjust tuning gears, rehydrate the woods and polish out to the Beauty you see now...detailing & set up here at the JVG shop she's 100% ready NOW and a real rare style beauty too. She's a very clean example of a real Vintage guitar its over 35 years old and is a Japanese Vintage Acoustic guitar. She Plays like butta now! .

The K-4L (Teisco Del Rey ET-460 Super Deluxe) had four of the large, chunky, single-coil pickups with chrome sides and black center insert revealing six square poles. These were controlled by four sliding on/off switches, plus a 3-position switch for solo, rhythm and super bass sounds, as well as volume and tone. The roller bridge had a spring-loaded muffler/mute.
These guitars appear to have lasted through 1989 or so. In 1990 the Stinger line shrank dramatically. Three guitars and two basses were listed in the Guitar World 1990-91 Guitar Buyer’s Guide. The three guitars in ’90 were the SSX, SPX and SSL. These were basically Strats (gone were the arched tops). The SSX now had three single-coils and fixed bridge/tailpiece. The SPX offered two humbuckers with a coil tap switch. The SSL had one humbucker and one single-coil, with a tap on the ‘bucker, and a traditional vibrato.
Yeah. The tremolo sound from the intro? That was four Fender Twin Reverbs. Myself controlling the speed of two of them and the producer controlling the speed of the other two. So two amps were recorded on one side of the stereo and the other two on the other side. I recorded the part on the tape without the tremolo, and then I sent the part from tape out to four amps, and he controlled two, and I controlled the other two.
: Just in a vintage excellent beauty with a fresh JVGuitars set up is ,New Martin strings bone nut & saddle and solid ebony with brass ring and Abalone inlay bridge pins, all old plastic cheap tone robing parts are tossed out for the JVGuitars TONAL UPGRADE to 2017 specifications otherwise she's ALL ORIGINAL see for yourself She's pretty darn clean and in better than 40 years old average vintage condition For a song. The Takamine F360 was DISCONTINUED decades ago This is the Lawsuit version Specifications Top Sitka Spruce Back Rosewood Sides Rosewood Finger Board Rosewood Electronics None Finish Natural Gloss Faithful D-28 style Dreadnought The most popular body shape of the past half century, the Dreadnought delivers a strong low end with plenty of volume. Structural integrity is excellent as is neck applignment its action is very good low and it plays with ease, new strings and sounds great this fine vintage Japanese instrument is ready for another 40 years of enjoyment. She is not new its actually 40+ years old and has been played, frets are still excellent and have been JVG dressed and she has a few minor and insignificant doinks or scratches and nothing to detour from its vintage patina beauty she's a true vintage quality instrument and is faithfully based on the great D-28 a playable work of art you can hear and enjoy for decades to come. Well taken care of California one adult owner that took really good care over 40 years just for you! Get her before she's gone. any questions or to purchase now contact Joe at .
Petros Guitars are an elite customized acoustic guitar luthier, formed by the Petros brothers, Bruce and Matt Petros, based in Kaukauna, Wisconsin. They are noted for their exceptionally high quality craftsmanship and often make guitars similar in appearance to Spanish Baroque guitars with the design, making both steel and nylon string hand-made guitars. Bruce began making guitars in 1972, and in 2000 he was joined by his brother to form the Petros company.[
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona.[27] Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company.[28] In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric.[29] Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster.[30] Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.