Maple is the most common wood used to make guitar necks. It is very hard and dense, and often has attractively detailed grain patterns referred to as figuring. Maple also has a very bright overall tone. Due to it’s figuring and its tonal characteristics maple is often used for a veneer or top laminate on more expensive solid body guitars. It is also used as a top wood in some archtop guitars, where it is usually laminated. Its hardness brings out the trebles in a guitar's sound. It is also often used for the fretboard where it adds definition to the sound. 
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.

I use a coat hanger wire to hang the body and neck from when I paint. It keeps the guitar from touching any thing and makes it easier to move from one place to another. I like to dedicate one place for painting and another for drying to avoid any free floating particales from landing on the wet paint. I use a shed for painting and hang the guitar to dry in my garage.

The 5968 written on the label is a model number, not a serial number. It seems that the labels were void of serial numbers rather than model numbers (the opposite of what I had originally suspected). The Dorado I'm working on is constructed of rosewood while the Model 5969 is Mahogany. The 5969 is identicle in size to the 5968 but had nickel plated tuners and a satin finish. From my quick look around the auction business, it appears that the Mahogany back and sides model brings about $150 less than the Rosewood model.

For instance, during 1970s and early 1980s, Japanese manufacturer Tokai Gakki produced superb replicas of 1957–59 vintage Les Pauls, and replicas themselves were gradually highly regarded. In the 1980s, to respond to the high demand for vintage models, Gibson itself began to offer a line of “Custom Shop models”, almost accurate reproductions of early Les Paul crafted by the Gibson Guitar Custom Shops.

Here we have a matching quad of late sixties Goodman speakers with green labels 25 Watts each @ 12 ohms Very rare in that EACH driver is fully functional, the cones are nice and stiff, no cone rub or any tears, just a killer set of vintage speakers. These came out of a wem cab and were also stock in laney cabinets(think sabbath tone, wem, Burman and Selmer gear Wem used odd impedances, these read 10.01 ohms on my multimeter so is treat them as 8ohms if they are wired up in a cab series parallel. Postage in the U.K. is £32 and they will be sent out in two separate parcels, you will have to arrange your own courier if your not U.K. based you can also collect in person! Any questions just ask
Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD
{"pageName":"[gc] pdp: in store vintage vintage 196s maxitone bruno sunburst hollow body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";113206695;;;;evar65=Vintage-Guitars-In Store Vintage","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}

The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
I had just finished signing up for I am a 54-year-old disabled Miner of 22 years, so I thought I would try to take up playing the guitar once again like I did when I was a kid. I forgot a lot about it through the years as life moved on, but now all I have is time. I came across your website and thought why not give it a try. so anything you suggest I will try once twice if I like it lol
Sometimes a guitar cab gets mic'd up differently night to night, plus every voice is unique, and every snare drum "speaks" differently (just ask a drummer). All of these minute changes and differences can and will affect the EQ decisions you'll have to make. This is why I'm such a strong believer in ear training and learning how certain parts of the frequency spectrum present themselves outside of their source-specific applications. That being said, these tips can be helpful as a place to start your search, but are not gospel by any means. So without further adieu, let's begin.
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]
Classical guitars by Martin are equal in craftsmenship to their steel string models. But unfortunately, their sound and feel is not what classical players seem to want. Therefore they do not have the collectability of the steel string models. I group Martin classical models to include the "NY" series and gut string models made from the 1930's and later.
After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.
Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.
I am not a real musician but I feel like one whenever I go in there. I bought my guitar there a few years ago. I have taken it and a travel guitar in there to get re-strung and Pat has always been so helpful and engaging. I follow his FB pages and saw him perform an original song "Will you Take My Name". I was so blown away by the song that I actually proposed to my wife by singing a version of that song. (His version is much better!). He has built a great following in a short time and has a nice selection of guitars and accessories. I really like his frequent FB posts of him showing a guitar he is working on, or a song he sings. Also, he features a lot of customers singing and playing whenever they stop in. This store has a great vibe. If you are in the area, stop in even if you don't anything, you will have fun. And if you need something, well then you've come to the right place!

Next up in your signal path comes the trusty gain pedal, or two or three even.  These effects will pass your signal through a transistor or diode to produce the clipping sound of a tube amplifier cranked up loud.  They can go from subtle drive of a loud Fender to the high gain insanity of a Mesa Boogie Triple Rectifier.  Most players call these effects distortion pedals, but there are different varieties of distortion that produce distinctly unique tones, all driven by the amount of gain you push.

Charles Kaman put a team of employees to work on inventing a new guitar in 1964.[2][7] For the project, Charlie chose a small team of aerospace engineers and technicians, several of whom were woodworking hobbyists as well. One of these was Charles McDonough, who created the Ovation Adamas model.[8]Kaman founded Ovation Instruments, and in 1965 its engineers and luthiers(guitar makers) worked to improve acoustic guitars by changing their conventional materials. The R&D team spent months building and testing prototype instruments. Their first prototype had a conventional“dreadnought” body, with parallel front and back perpendicular to the sides. The innovation was the use of a thinner, synthetic back, because of its foreseen acoustic properties. Unfortunately, the seam joining the sides to the thin back was prone to breakage. To avoid the problem of a structurally unstable seam, the engineers proposed a synthetic back with a parabolic shape. By mid-1966, they realized that the parabolic shape produced a desirable tone with greater volume than the conventional dreadnought.[9]

May Music Studio's Guide: The May Music Studio isn't a true "blue book." Rather, it is the website of a guitar studio that provides a quick tip guide to help you determine the fair market value of your guitar. The studio has years of appraisal experience and though they no longer offer appraisal services, their wisdom is distilled in the evaluation tips that they describe on their site.
I have been watching Marty, subscribe to many, but found Jonathan Kehew also a very good teacher with longer than most videos and a calm organized presentation . Would like to see what anyone thinks about Swift guitar lessons. I stated using his site as he allows downloads of pdfs of scales and other written material to accompany the videos. He also has three camera in camera closeups of chords and hand position. His appearance clothes, pale skin, open neck shirt, facial hair is a turn off but his content is good I think.
i have played fender most of my life .Fast neck and comfortable .However when my musical interest changed to southern rock i decided to buy a gibson . The mahogony body sounds different as does the string thru design of my firebird .Now i play both .Out of the box i prefer gibson and dont need to change a thing .I see many fender players always looking for “that sound” changing pickups pots etc.and using many boxws to change the tone.All i use with my gibson is a wa wa and overdrive
As successor to the Bogner Triple Giant, the Fish is a pre-amp with a legendary status, due to it’s unique character and it’s 4-channel configuration. Originally introduced in 1990, the unit was limited to 250 pieces, and is a rare find now-a-days. But thankfully, Bogner decided to reintroduce the Fish, featuring a “Country”, “Shark”, “Strato”, and “Brown” channel. Just like the original, this amp can take on just about any style you throw at it!
There’s an old joke in the technology industry: If a product has a problem, simply sell it as a feature. The electric-guitar-effects industry is no different. Music has often thrived on transforming faults into influential sound effects. Before professional studio production enabled granular tweaks in sound, standalone guitar effects emerged from deliberately converting hardware faults—often caused by the limitations of amplifiers—into positive features. By the end of the 1970s, it had become impossible to imagine how R&B, blues, and rock could have existed without these fortuitous mistakes.
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
Solid-body guitars are made with solid sheets of tonewoods that make up the soundboard, back, and sides. Solid tonewoods tend to dry out and age better with time further evolving your music signature as the guitar ages. One such gorgeous solid-body guitar is the Seagull Artist Mosaic Acoustic Guitar that we have done a full review on. You could also see what the Yamaha A3R A-Series Acoustic Electric Guitar sports for a solid-wood body!
Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.
MAKING A TEMPLATE Once you have traced out your design to the wood you can start routing. I recomend making a template first for the body rout out of 1/4" hard board or something equivalent to that. The professionals use cnc machines to carve and rout the bodies but smaller shops will use templates made from acrylic. The hard board works just fine, but might not last as long. You can also rout the body by hand and forget the template but if you mess up there's no going back so be carefull if you do.
All guitars need to be tuned to play properly and sound on pitch. This is done with the tuning pegs (also referred to as tuning machines) on the headstock. On the top side of of the neck is the fingerboard, also called a fretboard, over which the strings are routed. Pressed into the fingerboard are small metal ridges called frets. They help delineate individual notes along the fretboard and also make it easier play on pitch.
If you really like to cover all options, record using any of the above methods but also take a straight DI feed with no effects and record that onto a separate track so that you can process it later. Some engineers have been known to use a recorded DI guitar track to drive a guitar amplifier, which is then miked up and re-recorded, but you could take the easier route of using a hardware recording preamp or a guitar amp emulator plug-in to process the track.
So to get the most from your book, it’s important that you respect the intent of the author in how you approach it. That doesn’t mean you have to work through parts of the book that are below your skill level, it just means that you should always work through the book in a linear fashion. If you need to skip to the middle of the book to find something that applies to you that’s fine, just work chapter by chapter (or exercise to exercise) from that point on. It will help you retain the information that you learn in the book if you work through it gradually as opposed to skipping through it.
The Epiphone LP Special II has a mahogany body and neck. The fretboard features dotted inlays and is made of traditional, unfinished rosewood – a standard choice that yields a sound consistent with the aesthetic standards of a Les Paul. If you want a Les Paul but you don't want to pay a fortune for it, this mahogany beauty is worth your consideration.
3) The pedal switch. Placed on the top of the pedal, pressing it with your foot turns the effect on and off. This is where the name “stomp boxes” comes from – you “stomp” the box to turn on the effect. Pedals are most commonly placed on the floor next to each other so they can be toggled with your feet while you play with your hands, but larger units are often placed in large racks on top of one another, as otherwise they would take up too much floor space.

From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!

I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.
It comes with a single coil pickup in the neck position and a humbucker at the bridge - switching between the two pickups gives you both a strat like sound and an LP like tone. The pickup selector is 3-way so you can play with both pickups at the same time. It sports a shorter 24.75" scale length and smaller 12" radius on the rosewood topped mahogany bolt-on neck with a 1.6875" nut width making it very playable and accessible to guitarists of all levels of experience. Many customer reviews suggest the Empire HG feels and plays like a more expensive guitar.
Completely agree. A couple years ago I was also wanting a software guitar to play some simple chords over a track. Instead I spent about $140 on a guitar from Craigslist. A couple weeks and a couple dozen YouTube tutorials later and I was able to play the chords myself. Learning to play the instruments is a valuable skill that will separate you from others who just use software.
At some point, possibly in 1967 – please forgive the fuzzy chronology, – Unicord was purchased by Gulf + Western, the big oil/hospitality conglomerate. This was part the corporate acquisition mania rage of the mid-’60s which included deals for Fender (CBS), Gretsch (Baldwin), Valco (Seeburg), Kay (Valco) and Gibson (Norlin). Either just before or just after the Gulf + Western purchase of Unicord, Unicord was merged with Merson. It was probably then Merson moved from New York City to Westbury.

I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.
PRS: One of the best guitar brand one can go for (if they don’t want to go for the custom-built route). Their guitars look beautiful and sound buttery smooth. They have the most beautiful looking tops and inlay among non-custom guitars. The craftsmanship and attention to detail on PRS guitars is just exquisite. Of course they do have their custom shop called Private Stock and the Private Stock guitars are so gorgeous and meticulously built that anyone who sees them will be awestruck by their beauty, not to forget the sound of those guitars are like the voice of angels.
Guitar Center Fort Worth provides comprehensive guitar repair services for the Fort Worth area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Fort Worth can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
The design, while nothing particularly special, is clean and beautiful, which will help it appeal to most guitarists - the dreadnought acoustic body being one of the favorite parts. Ultimately, just about anyone could pick up this guitar and get what they need out of it, which is why it makes our top pick. We could recommend it to anyone, and when you talk about the price, it becomes even more attractive, because this is a high-end guitar for mid-range money.
DRILLING THE HOLES Now is a good time to drill the holes for the neck, pick up rings, bridge, string furreles, the control plate and cavity. Here is where I wish I had a drill press but I don't, so I just use a hand held drill. It doesn't matter wher you start drilling you holes, just make sure you use the right size bit for the screws that you will put in them later. To figure this out I compare the thickness of the screw minus the threading. A good rule of thumb is to start off with a bit that will produce a hole that is smaller than the screw. If the hole is too small when you try to screw in the screw then you can move up to the next size bit an re-drill. Be careful of the depth that you drill you hole to as well. A good way to do this is to size up the screw with the bit and mark the bit with a peice of tape. This will help you to keep from going to deep.
Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
That's the worst list I've seen. Jack White is on that list? That's a complete joke. I could play Jack White under a table. The guy can barely hit a note let alone stay on pitch. John Frusciante again, decent, but not even in the top 50. John Mayer? I'm not hearing much going on there to be honest. No Originality, same old, same old. Tom Morello? No! Sure it's cool to show off your little switches and digital effects but whatever, play something without a hip hop influence for God's sake. Michael Angelo Batio>Morello. Mentor beats student this time round.

There are two basic types of pickups for electric guitars, Single Coil and Humbucking (double coil). The most practical difference is that single coils tend to sound crisp and bright while humbuckers tend to sound warmer (for more information see Seymour Duncan's detailed explanation). An electric guitar can have any combination of the two types and the combination on a guitar is described using the first letter of the pickup type in order from the one closest to the bridge. For example a classic stratocaster will be described as SSS meaning all three pickups are single coil. A more recent development is the HSS strat which means it has a Humbucker at the bridge with two Single coils. I've put the pickup configuration of each guitar below in brackets after the model name so you can easily see which pickups each guitar has and in what positing they are.
Flawless build, the action is set up so well I don't see any need to tinker with anything. Pulled it out of the box, tuned it and strummed a few chords, then set it aside for 24 hours. Re-tuned it the next day and it has stayed in tune. I cannot find anything amiss or out of place on this one. Per the serial number, this is a 2015 Indonesian build. The wood is simply perfect in appearance and the tone is outstanding for a thinline. Yeah, I am happy with this one. Recommended.

In the early 1950s, pioneering rock guitarist Willie Johnson of Howlin' Wolf′s band began deliberately increasing gain beyond its intended levels to produce "warm" distorted sounds.[3] Guitar Slim also experimented with distorted overtones, which can be heard in his hit electric blues song "The Things That I Used to Do" (1953).[8] Chuck Berry's 1955 classic "Maybellene" features a guitar solo with warm overtones created by his small valve amplifier.[9] Pat Hare produced heavily distorted power chords on his electric guitar for records such as James Cotton's "Cotton Crop Blues" (1954) as well as his own "I'm Gonna Murder My Baby" (1954), creating "a grittier, nastier, more ferocious electric guitar sound,"[10] accomplished by turning the volume knob on his amplifier "all the way to the right until the speaker was screaming."[11]
A Japanese company which is renowned for its amazing guitars, Ibanez is a great brand for beginners. Since the Ibanez RG450DX RG Series Starter Electric Guitar has a maple neck, mahogany body, and a rosewood fretboard. Together, these give this guitar a great sound. The Ibanez RG450DX RG Series Starter Electric Guitar is a pretty fine looking guitar with amazing sound to boot.
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.

This little-known company is responsible for the St. George badge. This particular badge was made from 1963-1967. It also produced the rare Shiro guitar. It is possible that the company may also be responsible for the Pleasant guitar badge after 1966. This company may have been a small offshoot of Aria Guitar Company, founded by Shiro Arai, but that has not been verified as of today.

The ’62 EG-NT, EG-K and EG-Z were fairly primitive and appear to be leftover from the mid-’50s. The EG-NT had a small rectangular body with the bass side flush with the neck and the treble sticking out a bit to handle the controls. The head was stubby three-and-three with a circle Swan logo sticker and the fingerboard had painted diamond markers. The pickup looks to be the old slotted pickup of the early J-1, but may not be, with volume control. The EG-K was the Teisco version of the Rickenbacker Frying Pan, with a round body and neck with a head wider than the neck. This, too, had the rectangular head with a circle Swan logo. Markers were diamonds, the pickup was the slotted J-1 pickup, with one volume control. The EG-Z had an asymmetrical body with a short width on the bass side and a longer width on the treble side, with diamond markers and the stubby head. This had the old slotted J-1 pickup with volume control.
If you want to splurge just a bit more and opt for an instrument with a little more stylistic range, the Ibanez Talman guitar vault accessory kit might be right up your alley. It includes a lovely seafoam green Ibanez TM302SFG, 12 high-quality Dunlop Tortex picks, a strap, a gig bag, a Kyser capo, a polishing cloth, and a tuner. This is off the beaten path a bit, but for some players, that’s going to be absolutely perfect.
What is electric guitar tone? Tone is the sound of your guitar. Listen to B.B. King. His tone is rich and thick. You know it when you hear it. A lot of guitar players use pedals and effects to create that tone. Some of you may not be able to afford all those fancy effects. The good news is, you can make use of your hands and the controls on your guitar to create a myriad of tonal possibilities. Robert shows you how to use these components in this electric guitar tone tips guide by showing you 3 incredibly useful and powerful tricks for tuning up your tone. Your volume and tone controls, your controls knobs, and the switch between your guitar pickups can be beneficial in providing lots of tone.

I love this guitar! I am so happy with this axe and haven't put it down since it arrived. I don't think that you will find a better value in the Martin lineup, especially for an all solid wood guitar and a free HSC. People complain because this wasn't made in the USA, but I don't think that anyone would complain after playing this beauty. The action right out of the box was perfect, just like any high end Martin should be (plays like my HD28 and D18). This thing plays like butter and is silky smooth. Some people complain about the stratabond neck, but I love the feel of it and it is rock solid and should last forever! The finish and style of the guitar is very minimalistic, which is something that I love. It may be too plain for some people, but I love it. Something just

Launch price: $999 / £899 | Body: Basswood | Neck: 5-piece maple/walnut | Scale: 25.5" | Fingerboard: Maple | Frets: 24 | Pickups: Ibanez V8 humbucker (bridge), S1 single coil (middle), V7 neck humbucker | Controls: Volume, tone, 5-way selector | Hardware: Edge locking vibrato | Left-handed: Yes | Finish: Desert Sun Yellow, Road Flare Red, Purple Neon, White
An instrument unlike any other, the electric guitar gives musicians a feeling and hands-on experience that's nearly indescribable. Even with the same electric guitar, no two players sound exactly alike. Every nuance of the player's hands comes out in the electric guitar's tone, both in fretting and plucking the strings. The best players master not only command of the electric guitar, but also its interaction with their effects and amplifier. It's difficult to imagine a world without the combination of the electric guitar and amplifier, yet it's still relatively new in music. By the turn of the twentieth century, it only made sense that the popularity of the guitar would soon be combined with the onset of electronics. Over the past 75 years, the electric guitar has established itself as one of the most iconic, unforgettable instruments in the world. From jazz and big band to rock 'n' roll and funk, popular music would be drastically different today had it not been for the electric guitar.