Most guitars have at least one tone control installed. They can be either assigned to a particular pickup (Strat or Les Paul) or work as master tone control (Ibanez and others). Electronically, it’s a variable low-pass filter. Lower the resistance, more treble gets cut which means that higher pot values will sound a bit brighter (typically 500K vs 250K). Capacitor values usually traditionally range from 0.022uF (22nF) to 0.047uF (47nF) but many people find these values too large and install much smaller caps instead. Values of 10nF, 6.8nF or even smaller are reported to work quite well (I used 10nF in my latest mod). To help you decide between cap values and composition, check out this site. It hosts a couple of useful videos with cap value and composition analysis.

So, here's the story I heard from the guys in this shop, one of whom claims to have met Trev at NAMM. He said Fender (and maybe Gibson?) owe him a bunch of money for custom parts and design fees and whatnot, so he started the Vintage line as a sort of f*** you to them. Don't know if it's true but they're so much like a real tele I could see him getting sued, assuming they're not afraid of him countersuing for unpaid invoices. Who knows, maybe it was all a sales ploy. In any case all the sales pitch I needed was playing one. Plays as nice as my MIM Deluxe for half the price.

8dio sampled a 200-year-old Italian made mandolin to create a gorgeous sounding VST that simply rules, and will fool even the most well-trained ears into thinking it’s the real deal.  Like with the others in the series, we have our usual clean legato, artifacts, effects, tremolos, mutes — basically, you have everything you need to get the job done 99% of the time.
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the transducers are wired directly to their respective RCA jacks as opposed to current production tanks where transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond, Accutronics and Gibbs tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
This guitar could have rocked around the clock. Bill Haley and many other early rockers used guitars just like this baby. They have a sound of their own, and just breath taking, to say the least. This Harmony H38 dates to about 1957-59. She's completely original except for the button input jack that someone installed. This guitar puts a chill in cool. There's just something about playing a Vintage Harmony. $799.99

In the Guitar Setup course, the third DVD is devoted to acoustic guitar setup. Acoustics are very, very different than electric guitars, when you get right down into the mechanics of them, and as such they truly do need a section of their own in any guitar setup guide. You’ll learn how to setup the action and intonation properly on your acoustic, as well as many other tips and tricks that will help you keep it in top working order.
The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.
It’s easy to remove your pickup or pickguard and slide some foam rubber behind the unit. Start with soft foam first, and then increase the density to find the difference you like. Conveniently, the gray foam used in aftermarket pickup packaging makes great damping material: It’s soft enough that you can double it up (see Fig. 1 and 2) to create more pressure on the pickup’s back plate, too. This is a relatively no-frills mod that requires minimal materials and tools.
You can hear one all over Led Zeppelin’s debut record and all over Jeff Beck’s trademark “Heart Full of Soul” intro riff from the Yardbirds. He also used it extensively on the Jeff Beck Group sessions. Of course the most famous fuzz pedal is the Dallas Arbiter Fuzz Face. This pedal was favored by Jimi Hendrix and set the benchmark for fuzz tones that we are still chasing to this day.
My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done.
Understandably, the Blackstar ID:Core Stereo 20 V2's main selling point is its versatility, and this is reflected in the reviews. Sound quality also got a lot of thumbs up, with many describing the amp as full sounding, thanks to its stereo speaker configuration. For something this versatile, the amp's ease of use also gets commended quite often, with some finding it easy to dial in different sounds. Finally, a good number of users find the amp's overall build quality to be solid and reliable.

Woodwinds, brass, and similar instruments can only play one note at a time. To make a chord, they have to have a minimum of 3 players playing a single note in the chord at the same time. As you can imagine, this requires excellent timing and coordination between the players to make a clean chord. This is why orchestras have to have a Conductor to direct the music. With a guitar, you are the Conductor, and can make any kind of music you want, all by yourself.
Even with tone control maxed some high frequencies get cut. To let all the frequencies through you can either get a no-load pot or make one. CTS makes them for Fender and what they do is simply break the connection between the wiper and conductive element when pot is maxed. Additionally, they have an indentation so once they reach maximum setting they “click” and it’s not that easy to turn them back. To make your own just cut (or cover with nail polish) the element near the end, so that resistance between the wiper and the opposite lug reads infinite when maxed, at lower settings it should read as usual.
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).
As a beginner, it is best to avoid making a pawn shop, flea market, or yard sale purchase unless you are shopping with somebody who has experience in purchasing a guitar. Having never purchased a guitar, you may not know what to look for in terms of damage or guitar quality. With that being said, a local music retail shop is your best bet. You may also shop online with a reputable company, although be sure to review the business’ return policy.

What was listed above was just the tip of the iceberg, and many many other pedals are waiting for you: why not check out our huge guitar pedal selection, by clicking here? You will find Multi-effects (a clever way to have all your effects in a single and practical format), looper pedals (in case you want to record a short phrase and start playing over it and layer some guitar parts), fuzz pedals (made famous by the good ol’ Jimi Hendrix and many others), Phaser, Flanger etc.
{ "thumbImageID": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "defaultDisplayName": "Epiphone Les Paul Standard Plain Top Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Gold Top", "sku": "sku:site51331921974967", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top-1331921974967.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top/517413000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51331921974725", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue-1331921974725.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cardinal Red", "sku": "sku:site51331921975042", "price": "469.00", "regularPrice": "469.00", "msrpPrice": "782.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red-1331921975042.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red/517413000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006873", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony-1273888006873.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony/517413000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!
Hum: other than singlecoil hum, it is almost certainly caused by a ground issue, either a faulty string ground or ground connection, or a ground loop. I highly recommend going to Star Grounding. Shielding is also recommended. See the guitar nuts site for more information on these topics. Single coils are very succeptable to rf frequencies such as emitted by flourescent lights, tv's, computers, motors etc. Also note that high load or other appliances running on the same electrical circuit can cause noises through your amp.
Whenever I can do that, it’ll be a good day. Instead, we’re looking for a the correct combination of quality and cost, just like the aforementioned guitars. Ibanez usually gives you a great guitar for what you pay, so here we’ll narrow things down a little more and look at some of the best Ibanez guitars and "honorable mentions" for our greater list.

This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.
At the end of the day your personal preferences will prevail. The brands listed above are going to include just about every style of guitar you can wish for. This goes both for aesthetics and tone. I can safely say that sticking to my personal picks won’t leave you disappointed. Hopefully you have found this guide helpful. Do you like my choices? If so, leave a comment bellow and give me your two cents.
Graph Tech Ratio Locking Guitar Tuners (3+3)   New from$118.96In Stockor 4 payments of $29.74 FREE 2-DAY SHIPPING Babicz Full Contact Strat Tremolo   New from$142.95In Stockor 4 payments of $35.74 Free Ground Shipping Gibson Vintage Tuners/Tuning Machines (Set of 6)   New from$89.99In Stockor 4 payments of $22.50 FREE 2-DAY SHIPPING Graph Tech Ratio Locking Guitar Tuners (6 In Line)   New from$118.96In Stockor 4 payments of $29.74 Free Ground Shipping See All Electric Guitar Parts
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
CALIFORNIA PLAYER models express unique personal style with bold looks and inspiring sound. The satin finish mahogany neck features an easy-to-play, slim-taper “C”-shaped profile suitable for any playing style. When it’s time to plug in, solid-top California Player models also feature a Fishman pickup/preamp system for incredible amplified performance with pure, rich and resonant tone.
According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.
Among other things, Peavy is somewhat famous in the guitar amps world for being one of the first manufacturers to produce a close-to-tubes type of sound from their transistors amps. While this achievement might not have seemed perfect for the most discerning of ears, their solid state guitar amplifiers are good enough for the general public not to tell the difference.
Two and a half steps down from standard tuning. Used in Swedish death metal by bands such as At The Gates, Dismember, Edge of Sanity, Entombed, Amon Amarth, and Arch Enemy (during the Johan Liiva era), as well as Fear Factory, Carcass, Type O Negative, Cathedral, Seventh Void, Fleshgod Apocalypse, Sepultura, Five Finger Death Punch, Soulfly, Within Temptation, Triptykon and guitarist Kirk Windstein of Crowbar and Kingdom of Sorrow.
One thing that is worth trying is combining different delays with different reverb effects. You can get some seriously beautiful sounds with a reverb and delay effect that sound good together. Some manufacturers have even gone so far as to create reverb and delay combo pedals. It is truly a perfect combination of effects, kind of like peanut butter and jelly.

There's no reason not to try an effect if you want to. Sure, some kind of effect might mask some bad habits (reverb and delay might sort off mess your timing), but distortion for example is almost like playing another instrument, and if you're into punk/rock, the sooner you try it the better. You will have to figure out ways to mute the strings and reduce string noises, which is part of the technique.

Why We Liked It - Whether you want to find an electric guitar to play sweet country tunes or something completely different, this is a great guitar! It’s extremely versatile and is therefore one of the best ones we’ve tried for beginners so far. That doesn’t mean it can suit more advanced musicians and many other skill levels as well, but especially for beginners, versatility is key.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: kent","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"kent","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
We all are now living in a great time considering the choices that we currently have. Even though it is a good thing every so often, it can actually be complicated to decide and buy the best electric guitar. If you one to have it for a serious reason, it will be realistic to own the one which comes equipped with guitar essentials like strap, carry-bag, picks, and if possible a good practice guitar amp.
{ "thumbImageID": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "defaultDisplayName": "Epiphone Les Paul Standard Plain Top Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Gold Top", "sku": "sku:site51331921974967", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top-1331921974967.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top/517413000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51331921974725", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue-1331921974725.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cardinal Red", "sku": "sku:site51331921975042", "price": "469.00", "regularPrice": "469.00", "msrpPrice": "782.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red-1331921975042.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red/517413000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006873", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony-1273888006873.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony/517413000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
These are hybrid tube and transistor amps. They are not emulators like a line 6 or other amps. They have 8 different analog amp circuits based on various amps, they don’t call them what they are but they are similar to Fender, Vox AC15, Vox Ac30, Dumble, Marshall and I think an Orange ( CLEAN1, CLEAN2, CRUNCH1, CRUNCH2, OD1, OD2, H.GAIN1, H.GAIN2). I don’t use the higher gain ones much - they are very heavy metal sounding. They also have very nice modulation effects - Chorus, Delay, and Reverb. I no longer use a separate chorus or reverb in my signal chain. The amp uses a 12AX7 tube pre-amp and the power amp which gives the tube overtones to the analog circuit you choose. Plus, you can bias the tubes to bright and power in both the pre-amp and post amp.
Though not much is known about the production of the Hi-Flier after about 1977, it clearly came to an end — and clearly has had an impact on players in the vintage market. Used by guitarists like Cobain and Lee Ranaldo of Sonic Youth, as well as many others in a variety of bands, the Hi-Flier gained notoriety as a unique guitar with a sound as striking as its looks.
With so many features, it can be tempting to just dismiss it as a low quality jack-of-all-trades unit, but even experts are convinced of its versatility and sound quality. Guitar World concludes: "Costing less than most single-effect stomp boxes, the G1Xon is an incredible bargain that provides versatile multi-effect processing power and impressive performance and practice capabilities."

Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.

Looks awesome. Great tone. Had A LOT of fret buzz out of the box (EADG strings from 7th-11th fret). Got it set up to try to eliminate buzzing...only way the guitar tech could seem to get rid of it was by raising the action quite a bit, so now it's much higher than I like...bummer. No buzzing and sounds great, but the playability is definitely not what I was hoping for considering the price.
If they're properly stretched it's usually not a big problem. Usually you can just push down on the new strings around the bridge and the nut and retune a few times to get the slack out, or do the push down/pull up technique to stretch them. I find that most players have more tuning issues from holding down the strings too hard or inadvertently slightly bending them with their fretting hand.
Roland has come a long way from its humble beginnings back in the early '70s as a rhythm machine manufacturer. The company grew to produce various other instruments and amplifiers, and is now one of the biggest music gear manufacturers in the world. With so many guitar brands under their name that could produce amps for them - like Boss and Line 6 - they still take the effort to build their own branded amps, and the success that they are enjoying is proof that they are doing the right thing. Their most popular amp is still the Roland Jazz Chorus, as used by artists like Albert King, Andy Summers, Metallica's James Hetfield and Kirk Hammett, Robert Smith of The Cure, Jeff Buckley and many more. These days they have a variety of amplifiers in the entry to mid-tier market, most of which continue to garner great reviews.
As the first blues guitarist to pick up an electric guitar and play single-string solos in the late Thirties, T-Bone Walker didn’t just lay down the foundation for electric blues and rock and roll—he also built the first three or four floors. John Lee Hooker credits T-Bone Walker with making the electric guitar popular, claiming that everybody tried to copy T-Bone’s sound.
The electric guitars have to be plugged in for sound to be produced. A cable and an amplifier are a must for them to produce sound. They are largely dependent on some electronic pickups, having between one and three pickups on their bodies, for them to produce this sound. They are relatively much lighter and have lighter gauge strings when compared with their acoustic counterparts. It is therefore a better option for the small statured or small-handed players. Getting comfortable to hold a guitar or fret the notes is quite physically challenging when working with the acoustic guitars than with the electric types.
Woods typically used in solid-body electric guitars include alder (brighter, but well rounded), swamp ash (similar to alder, but with more pronounced highs and lows), mahogany (dark, bassy, warm), poplar (similar to alder), and basswood (very neutral).[19] Maple, a very bright tonewood,[19] is also a popular body wood, but is very heavy. For this reason it is often placed as a "cap" on a guitar made primarily of another wood. Cheaper guitars are often made of cheaper woods, such as plywood, pine or agathis—not true hardwoods—which can affect durability and tone. Though most guitars are made of wood, any material may be used. Materials such as plastic, metal, and even cardboard have been used in some instruments.
Maybe you'd rather check out the legendary "Marshall Sound" in all its glory? If so, flip the switch on the Marshall DSL40C 40W All-Tube 1x12 Guitar Combo Amp. This all-tube powerhouse is great for gigging guitarists, thanks in part to its fantastic projection and its Pentode/Triode switch that allows the performer to drop the power down from 40W to 20W on the fly for even more versatility. When only the best will do, nobody delivers like Marshall.
But Lou’s edgy lyrical stance and image spawned something even more fundamental to deviant aesthetics: punk rock. It is with considerable justice that he graced the first cover of Punk magazine in 1976 and was subsequently dubbed the Godfather of Punk. Lou embodied a new kind of rebel hero, an amalgam of two distinctly different but equally vilified social pariahs: the disaffected intellectual and the scumbag street hustler. In recent years, he’s added a third persona: the grumpy old man.
So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.
Otherwise, while the manufacturer is considerably shy when releasing specs regarding this product, customer reviews can give us a good idea of how well it performs under real-life circumstances. In brief, it performs well, particularly so for country music and slow rock, especially when paired with a couple more 12” speakers on top of the ones that are already integrated into its chassis.    
The greatest all time innovative guitarist to come out of the UK. Such a distinctive style and sound which is most important. Many guitarists have a similar sound and tone to others. This guy got me hooked on the sound of the guitar from a young age and I have tried to find others in a similar vein to no avail and I own over 2000 rock/metal CD's and have followed the scene since the mid 80's. A totally under estimated guitarist in my opinion. Long live The Cult.
Gibson also tops the list of best electric guitar brands that retain a consistent design. Among the popular models, the Les Paul is a favorite guitar that has been ruling the music world for several decades. It is a high-end, USA-made instrument that comes in a variety of variations. Other famous Gibson guitars include the SG, Explorer, Flying V, ES-335, and Firebird.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.

Popular condensers: when it comes to condenser mics for guitar-cab miking, the AKG C414 (in its various flavours — the C414 B-ULS is pictured above left) and the Neumann U87 (centre) are both popular choices. Some producers also frequently look to the U87's predecessors, the U47 valve (pictured) and FET models, and the U67.The characteristics that producers most often seem to be looking for in these mics are their extended frequency response, especially at the low end, and the slightly softer, more diffuse sound imparted by the large diaphragm. These mics also tend to boost the 5-15kHz region, but this boost is rapidly lost as you move off-axis (it is inherently difficult to design a large-diaphragm capsule with an even off-axis frequency response).

They say good things come in small packages. Well, "they" weren't wrong! The Orange Micro Terror Guitar Amplifier Head is no bigger than a lunchbox, but packs enough power to stand up to some of the bigger amplifiers out there, especially when you connect it to a 2x12 or even a 4x12 cab. It features a combination of solid state and valve technology and throws out 20w of pure power thanks to the 1 x 12AX7/ECC83 pre amp valve. Easy to use, affordable and even easier to carry around, you can easily gig with this or use it as a practice amp at home when coupled with the custom built Orange PPC108 1x8 Closed Back Speaker Cabinet.
The Ultimate Beginners Series gets aspiring musicians started immediately with classic rock and blues riffs, chord patterns and more. Now, for the first time ever, Basics, Blues, and Rock are combined in one complete book and DVD set. Follow along with 4 hours of DVD instruction and 3 hours of audio tracks, with the help of on-screen graphics and printed diagrams. The Ultimate Beginners Series: Electric Guitar Complete takes you from picking to soloing and power chords. If you're serious about mastering the blues and rock styles, this book and DVD set is a must-have.
Moreover, it can hand a wide range of musical styles and techniques. In most cases they're more popular with classic rock and blues fans, perhaps the Stevie Ray Vaughan or Eric Clapton enthusiast. However, there have been players over the years who have used Stratocasters in much heavier styles of music. Billy Corgan and Jim Root are just a couple that come to mind.
For 70 over years, Kiesel Guitars has been building the highest quality guitars, basses, pickups, replacement necks, kits and accessories for pro and hobbyist musicians alike. We offer a complete lineup of instruments, including carved top guitars, multiscale fanned fret guitars & basses, MIDI synth access guitars, headless guitars & basses, extended-scale baritone guitars, acoustic/electric guitars and basses plus signature models from Jason Becker, Allan Holdsworth and more. Our Custom Shop builds instruments in the USA from the highest quality materials, at a direct price that can't be beat, along with build times of around 10 - 12 weeks. Hundreds of options, including exotic woods, inlays, fretwire, hardware, pickups & electronics and more allow you to order an instrument perfectly suited to your playing style and personal tastes. click for more...

The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.

The Streamliner concept is simple: to create more affordable Gretsch guitars without losing their specific DNA. Two new Broad'Tron humbuckers are controlled in classic Gretsch style by a three-way toggle selector switch on the bass side shoulder, a master volume on the treble side horn, and then a trio of controls by the treble-side f-hole for individual-pickup volume and master tone. The G2622's construction gives a different response and resonance to other new releases from Gretsch and, with these pickups, moves further from the Gretsch sound. And while its construction gives it a more solid, or at least ES-335, character, it's a little more airy and less punchy with a softer, squashier tonality. The beefier pickups certainly don't nail a classic Gretsch tonality - although if that's what you want, the full-size pickups are easy to replace - but they do broaden the sonic potential, especially for more gained styles, while staying close to the classic iconography. If you want a great-value semi-hollow, this is among the best electric guitars for under $500.
The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.
But there were already hints of the change to come, of the evolutions in music technology that would eventually compete with the guitar. In 1979, Tascam’s Portastudio 144 arrived on the market, allowing anybody with a microphone and a patch cord to record with multiple tracks. (Bruce Springsteen used a Portastudio for 1982’s “Nebraska.”) In 1981, Oberheim introduced the DMX drum machine, revolutionizing hip-hop.
Not many classical guitar concertos were written through the guitar history. Nevertheless, some guitar concertos are nowadays wide known and popular, especially Joaquín Rodrigo's Concierto de Aranjuez (with the famous theme from 2nd movement) and Fantasía para un gentilhombre. Composers, who also wrote famous guitar concertos are: Antonio Vivaldi (originally for mandolin or lute), Mauro Giuliani, Heitor Villa-Lobos, Mario Castelnuovo-Tedesco, Manuel Ponce, Leo Brouwer, Lennox Berkeley... Nowadays, more and more contemporary composers decide to write a guitar concerto.
While a little on the pricey side, their products are seen as particularly powerful and reliable overall. The H&K Trilogy is well appreciated for its versatility, allowed by the high level of German technology and engineering involved in its construction.  It has easy MIDI control and three channels, a clean, crutch, and lead, all with boost options that give a lot of freedom to musicians who are into experimenting.

A semi-hollow thinline version appeared in 1968/69, designed by German guitar maker Roger Rossmeisl. Today two versions of the Thinline are available, the ’69 version has two standard Telecaster pickups and a mahogany body, while the ’72 version, based on the Fender Telecaster Deluxe, yields two Fender Wide Range pickups and a solid natural swamp ash body. In 2011, Fender released the Modern Player Telecaster Thinline as a part of the Modern Player series. The guitar features two MP-90 pickups, similar to the Gibson P-90. The Fender Custom Shop has a production model referred to as the “50’s Telecaster Thinline”, designed by master builder, Chris Fleming. Given that the first Thinlines appeared in the late 1960s, this name may seem inappropriate. However, the Custom Shop model, with its ash body and maple neck/fingerboard, as well as Nocaster pickups, shares enough DNA with the 50’s versions of the Telecaster to make the name a good fit.

I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.

Jimmie Vaughan: based on Jimmie’s own ’57 Stratocaster, the Jimmie Vaughan Tex-Mex Strat reflects his deep roots, traditional style, and preferred Strat features. Noteable for it’s alder body, 3 Fender Tex-Mex single-coil pickups, an extra-hot bridge pickup, a special tinted maple 1957-type V-shaped neck with maple fretboard and medium-jumbo frets, vintage machine heads, original Fender synchronized tremolo, and custom tone control wiring. Tone, tone and more tone.

After the success of the DD-500, RV-500 and MD-500 units, Boss's GT-1000 is a floorboard combining all three. Sleek and modern, it's a formidably robust beast. To the rear, there’s the usual array of inputs and outputs, including USB recording out and an input for an additional expression pedal plus jacks to insert two mono pedals, or one stereo external pedal and a nifty send for amp channel-switching. In terms of editing, it’s not the most intuitive. For example, when you switch between patches in a bank, you’re not just turning off, say, a ‘Tube Screamer’, but switching to a different chain that doesn’t have a gain block - standard in rack-style processing, but tough for beginners. Sounds-wise, the 32-bit, 96khz sampling finds the GT-1000 punching above its weight, and on the effects side, there’s a wealth of modulations, delays, reverbs and drives. If you run a larger, more traditional pedalboard, perhaps the so-called ‘Bossfecta’ of the MD, RV and DD 500-series units would provide more flexibility, but for most players, the GT-1000 is a highly practical solution. 
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
I'm looking for a similar guitar. My first electric in 1969, purchased used for $50.I lost it sometime in the 70's, but still have a picture of it. It was a sunburst finish cutaway violin shaped body with Bigsby type tailpiece and a tunable bridge with a flip up mute bar. The headstock is similar to a Gibson but the neck was thinner.I can't remember how it played or sounded.I'm just looking to replace it for nostalgic reasons. I also recently purchased a Kent Les Paul copy I found on e bay while searching for kenr guitars.I have seen the framed ads but I have yet to find that model.
The Thunderhead guitars would be offered until June of ’72, with several model designation changes along the way. In ’70, the K-1360 became the K-1213, and in May of the following year changed again to the K-1233. At the same time, the vibrato-equipped models also changed, the K-1460 becoming the K-1214 and then the K-1234. The Tornado lasted until the end in January, ’73, but also went through the model number changes along with the Thunderheads, the K-1160 becoming the K-1211 and then the K-1231. The vibrato Tornados went from K-1260 to K-1212 and then K-1232.
Like most things involved with creative pursuits like making music, there isn’t a steadfast right or wrong way to do things, but if you encountered any of the problems above you’re definitely doing things wrong (unless you play in a German nihilist industrial noise band, in which case, go nuts). This article will help you avoid those scenarios by describing some of the basic rules and suggestions for placing different effects in the ideal order in your rig’s signal chain and how to achieve the best possible tones when using several stomp boxes together. If you’ve ever wondered how to put together your own pedal board, this info will give you a good start toward obtaining the best sound and most versatility out of your rig.

Now I'm talking to the owner of my local mom & pop shop who sold me my Affinty (which is great but the string spacing sucks). Guy is leaning toward making a deal for an Austin. Maybe I'm dead wrong, but I don't like Austins, they are crap IMO. I told him I have some extra cash and maybe we could work something out, but I just feel like this guy has a lousy inventory of cheap guitars and I will be hard pressed to escape with a decent instrument.
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!
Russell is not only one of the hardest working technicians in Dallas but also a classically trained guitarist with a degree in classical guitar performance from SMU. To supplement his income playing classical guitar, he joined the Brook Mays team before finding a home at Charley's Guitar Shop. "Having a background as a player helps with cutting through the issue," he says. "I think the real part of guitar repair is being able to observe what's going on with the guitar but also understanding what the player is going through."

Although Yamaha are a better known Japanese musical instrument company, Ibanez stands out from the crowd in rock guitars, not just in Japan - but the world over - with a number of big name guitarists such as Joe Satriani, Steve Vai, and Paul Gilbert having signature models. They originally built their American presence in the 1960s on the back of Gibson and Fender copies, however the RG series introduced in the 1980s was a more original design, based on Steve Vai's JEM Universal, and became one of the biggest selling metal guitars of that period and beyond.
We guitarists can be slow to come around to new ways of doing things, heck we still prize the 1904 technology of the vacuum tube in guitar amplifiers, so it's a huge testament to Ovation's success that they've managed to be so successful while breaking the most sacred rules of guitar material and construction. Great examples of this are their Celebrity Elite CE44 and their entry-level Applause Balladeer AB24.
Although there have been several copies of Gibson guitars in Epiphone, yet their quality, tone, and artisanship suffice to attract and retain more customers. During the past few years, Gibson has adapted some modifications in their lineup. This includes restoring their classic Les Paul Studio design as Studio T, and the Les Paul Studio Faded, which is an affordable variant.
Chords in a song are arranged according to chord progressions, which are chord intervals that work pretty much the same as single notes in a scale. It’s very important for you to learn chord progressions for the various keys, because then, as long as you know what key the song is in, you can figure out the chords in it very easily. There may be times when you want to change the key of a song to one you can sing or play in better, and for this, knowledge of chord professions is critical.
The remaining ’62 Teisco laps had a sort of paddle shape to the body, with sides wider than the fingerboard all the way up to the asymmetrical head with the circle Swan logo. The EG-A and EG-S had short scales and black fingerboards with the diamond markers, while the EG-U and EG-L had longer scales with fingerboards angled toward the bass side at the pickup. The EG-U had a light fingerboard with split-parallelogram markers, whereas the EG-L had a dark ‘board with dots. All were six-strings with one black-covered pickup and a little plate with volume and tone controls. Tuners mounted from behind the head as on a Spanish guitar.
Billie Joe Armstrong‘s two signature guitar models are Les Paul Juniors. The first has been in production since 2006 and is based on the ’56 Junior he uses that is named ‘Floyd’ which was used on every Green Day album since 2004’s American Idiot. The second is a TV Yellow double-cutaway model which began production in 2012 and was used on Green Day’s ¡Uno! ¡Dos! ¡Tré! album trilogy. Both models have one Billie Joe Armstrong signature pickup, the H-90, a humbucking version of the P-90 pickup. In 2011, Gibson released a limited run of Acoustic signature Gibson Billie Joe Armstrong J-180s.
Most overdrive/distortion pedals can be used in two ways: a pedal can be used as a "boost" with an already overdriven amplifier to drive it further into saturation and "color" the tone, or it can be used with a completely clean amplifier to generate the whole overdrive/distortion effect. With care - and with appropriately chosen pedals - it is possible to "stack" multiple overdrive/distortion pedals together, allowing one pedal to act as a 'boost' for another.[44]
The Acoustic Resonance control gives you the option of adding life back in to your sound. Where some pickups, Piezos in particular can sometimes sound “quacky” and hard, due to the fact they only pick up the sound of the bridge area, the AD-10 analyses your pickup signal and recreates the missing body and string resonances accurately to ensure the subtle tonalities of your playing qualities of your guitar are intact.
Firstly these are both 'mic-level' or 'instrument-level' inputs (they carry very quiet signals) but hi-Z signals are more prone to interference. The lo-Z signal consists of the instrument's mono signal (hot) and it's inverted waveform (cold), the cables are twisted around one another such that any interfering signal generated in one is negated by the other (much the same as the way a humbucking pickup works).
3) Had a little fret buzz on the high E but that was probably more my fault than anything else because I changed the light gauge strings to extra lights which sometimes requires the neck adjustment to be loosened. This guitar is set up from the factory with light gauge strings which means if you put on extra lights, the neck will have a tendency to straighten out too much which brings your strings closer to the frets and sometimes results in fret buzz. An easy fix though...just take a straight edge, like an aluminum yardstick, and lay on the neck, or hold down the string on the first and last fret and you should have just a slight space (approx. 1/64" - 1/32") between the frets and strings in the middle of your fret board. In other words, contrary to popular belief the neck is supposed to have an ever-so-slight dip in the middle and IS NOT supposed to be perfectly straight. My guitar required about a 3/4 turn (loosened) on the neck adjustment to fix the fret buzz. And, remember when adjusting the neck don't expect immediate results. Give the neck time to settle-in adjusting a little at a time and then waiting a couple hours or so before checking it again. If you still have fret buzz after adjusting the neck then it most likely will be at the nut because Yamaha keeps their action really low at the nut. If so, just take a piece of paper and put it under the string at the nut which should be an easy fix.
Looking at the front (or top rather) panel of the Boss ME-80 is where it gets interesting. Don’t let the sheer number of knobs intimidate you. Shaping your tone with the ME-80 is a very tactile experience, just like you would if you had a pedalboard full of pedals. The ME-80 is made for the guitarist that doesn’t necessarily want to lug around (or spend money on) a large pedal collection, but still loves the feeling of turning knobs and instantly hearing results. The interface is actually pretty easy to understand. Every major section is surrounded by a white border, and to design a sound (a.k.a. patch) you just move through the sections and set the effects to your heart’s content. We should mention that the Boss ME-80 has 59 different effects and nine guitar preamps which you can use. The first section labeled PREAMP is where you set your amplifier model, and should feel familiar if you’ve ever messed with a guitar amp. Next you have an EQ section, REVERB, COMP, OD/DS, MOD, and DELAY. You can look at the front panel for yourself in a closeup photo to see the various effects available within each of these groupings. The 8 black footswitches along the bottom are what you use to switch effects on and off, as well as move through banks and presets. They’re not your traditional stompbox footswitch, but they feel pretty nice. As is the norm with the larger multi-effects floor units, the ME-80 incorporates an expression pedal, which is assignable to different effects via the knob next to it. Very easy to use, very intuitive.
Amazing guitar for the price point. It's build is so accurate it requires no setup, just tune and it's ready to go. Great rich sound, very bright, great action up and down the neck. I can't put it down and I'm enjoying it more than my six string acoustics. There's something very forgiving about playing a 12 string vs a 6 string, the neck is slightly wider and there's more room for the fingers, and the pressure points on the fingers are wider too which lends to smoother playing.
The first trick I will show you is very simple: you only need to add a bit of distortion to the signal so that the bass line stands out from the mix without making it too heavy. To achieve that, and as awkward as it seems, guitar pedals seem to be more fitting than bass pedals, at least for recording and with this particular technique. Indeed, "crunchy" guitar distortion pedals are usually pretty "poor" in the low end of the frequency spectrum, which makes it easier to mix the distorted signal with the original one. In the following example I used the famous Ibanez Tube Screamer:
The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.
Tube amps use the height of the 1940s electronic technology to give out what is widely considered the best sound quality to date. Since some people tend to be confused by this, it’s important to note that only their sound rendering circuitry is based on vacuum tubes (or lamps) while the equalizers and assorted bits employ transistors like any other piece of modern electronics, with no bearing whatsoever on how the sound will come out.
Aside from the superstrat ESP M-10 shown earlier. The ESP LTD EC-10 is also an affordable guitar but with a different body design derived from the Les Paul. The features of this LP inspired guitar that makes it different is the bevels on the body and belly cut at the back for comfort. Its major resemblance to a Les Paul is the humbuckers pick-ups equip on the guitar. Together with the bridge design for having a stopbar and tom bridge without a whammy bar.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
Major-chord progressions are constructed in the harmonization of major scales in triads.[21] For example, stacking the C-major scale with thirds creates a chord progression, which is traditionally enumerated with the Roman numerals I, ii, iii, IV, V, vi, viio; its sub-progression C-F-G (I-IV-V) is used in popular music,[22] as already discussed. Further chords are constructed by stacking additional thirds. Stacking the dominant major-triad with a minor third creates the dominant seventh chord, which shall be discussed after minor chords.
There are several good reasons why you might want to wire your Strat pickups in series. If you want more volume and midrange out of your pickups, the parallel/series switching may be the perfect option. As I mentioned, parallel wiring of two pickups is what you are used to hearing from a Strat. Parallel wiring adds transparency and clarity to the tone.
Some bass amps have two inputs. One some amps, one is a high gain input and the other is a low gain input. On other amps, the two inputs may be intended so that two basses can be plugged in at the same time. On these amps, there may be a separate volume control for each input; this is done to enable a bass player to switch between two instruments on different songs (e.g., a fretted and fretless bass) without having to unplug and plug in jacks. For example, the vintage Traynor Bass Master tube head has two inputs, each with its own volume control. Some bass amps have an auxiliary in jack, for plugging in a drum machine, keyboard bass or synthesizer. Some bass amps also have an external speaker out jack. While this jack is also 1/4", a speaker cable must be used with this jack, rather than a patch cord, because it sends a powered signal out to an external speaker cabinet. Higher-powered and more expensive amps may have Speakon output jacks.
This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.
• Ready-made sound : ELECTRIC SUNBURST offers a high-quality set of effects, amplifiers and cabinet emulation. Three distortion and four modulation effects provide the sound of classical pedals, while five amp models and a choice of ten cabinets offer an authentic guitar sound – exactly the same. Finally, a high-quality console equalizer, two compressors, tape emulation, reverb, delay and tap delay allow you to get a real guitar sound!
I skimmed ahead and quickly realized that, at last, someone has written THAT GUITAR BOOK that we are all looking for when we start out but that no one seems to have written yet but that you hope to write someday when you finally figure out what you are doing so that you can help others and prevent them from wasting so much time and money and hopes....(takes a breath)
Our guide to guitar strings, the hope and savior of beginners across the world. We're going to cover the types of guitar strings, how they're made, the best brands, the standard gauges, how to pick the right ones for your instrument and style, what to expect in terms of cost, and much more. Take a ride with me through Ledger Note's guitar string guide...
The paper presents the results of the modal analysis of six types of structures made from plates. Firstly, was done geometrical modeling of structures, after which they were numerical modeled using shell and solid finite elements. The next step consisted in simulating the structures behavior to free vibration for different thicknesses and materials. The results were processed and compared in... [Show full abstract]

Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.