Note: For additional information and history on Ibanez guitars, please check Wikipedia. For a great overall resource for Ibanez guitar questions, check out the Ibanez Collectors World website. The ICW is a gathering of Ibanez collectors who relish in the challenge of not just collecting Ibanez guitars, but of identifying old models, dating guitars by serial numbers, and generally watching the vintage guitar marketplace to understand how interest in Ibanez guitars is evolving.
ESP Is simply the best brand you could ever use, from it’s awesome quality ESP too their good quality/price realtion with LTD. You can use an LTD distressed series for playing classic rock, for blues also, and the Xtone series make their work too, and from their LTD standard and deluxe series to their ESP standard and signature series for the best and widest range of metal you could ever imagine, with them you can from Black Sabbath or Ozzy Osbourne, to Metallica and Children of Bodom. (Kirk Hammett, James Hetfield, Alexi Laiho, Henkka, Michael Paget, Gus G, Tom Araya, Jeff Hanneman and almost any japanese guitar and bass player that is considered good [Seriously, without exagerations or lying] endorses ESP guitars and basses).

DRILLING THE HOLES Now is a good time to drill the holes for the neck, pick up rings, bridge, string furreles, the control plate and cavity. Here is where I wish I had a drill press but I don't, so I just use a hand held drill. It doesn't matter wher you start drilling you holes, just make sure you use the right size bit for the screws that you will put in them later. To figure this out I compare the thickness of the screw minus the threading. A good rule of thumb is to start off with a bit that will produce a hole that is smaller than the screw. If the hole is too small when you try to screw in the screw then you can move up to the next size bit an re-drill. Be careful of the depth that you drill you hole to as well. A good way to do this is to size up the screw with the bit and mark the bit with a peice of tape. This will help you to keep from going to deep.

A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.

Godin (pronounced Go-dan) was founded in 1972 by Robert Godin in Canada and now owns a number of highly respected acoustic guitar brands including Art & Lutherie, Simon and Patrick, La Patrie and Seagull. Their electric guitars, produced under the Godin brand, have been played by greats including Roger Waters, Elliott Sharp and John McLaughlin. Many of their high-end models come with 3 types of pickups - regular electric guitar pickups, piezo pickups for producing an acoustic-like sound, and Synth/MIDI pickups for making any kind of sound you want.

Vox quickly grew. In 1964 Tom Jennings, to raise capital for JMI's expansion, sold controlling interest in JMI to the Royston Group, a British holding company, and sold American rights to the California-based Thomas Organ Company. Displeased with the direction his old company was taking, he left the company in 1967, which was around the same time that Marshall overtook Vox as the dominant force in the British guitar amplifier market. While Royston's Vox Sound Equipment division set up new operations in the Kent town of Erith, Tom Jennings set up a new company in his old Dartford location, joined later by Dick Denney. Jennings Electronic Industries operated for several years, making an updated and rebadged version of the AC30 along with other amplifiers, as well as a new range of organs.
Here we have for your consideration the Booming classic vintage Yamaha FG 160 Acoustic Guitar Made in Japan in the early 70's from Nippon Gakki factory. This example is an eary 70's a more RARE version Yamaha FG 160 again this example is the Made In Japan Nippon Gakki and not to be mistaken for the similar Korean version of the FG-160 which is also nice but not the same as these apples/oranges this is a great guitar. This example was built over 35 years ago and was built to very high detailed standards workmanship are wonderful quality as well as some of the best woods available in that time period to compete with the great Martin and now this Yamaha is quite well aged and is a true SINGING vintage guitar in its own right. This one has the Amber/Tan label and not the Red Label. The frets have good height and appear newish and though to probably to have had a fret job done sometime in it's past. The guitar has it's natural age and patina with a few expected minor nicks,dings and scratches from a well loved and played instrument. This fine example is on the way... We upon receiving we will remove strings clean and detail the guitar oil rosewood and polish finish, set intonation and set up this guitar to play very well and may include new bone nut/saddle/strings we have several of these old Yamahas and they are amazing instruments very well compared to Martin, Taylor, Gibson for there fine construction and playability with amazing tone for this kind of money... Here s a link to Harmony Central if you care to re All New pics and additional info soon to come... Interested ? ask Thanks .
By and large, time-based effects split the guitar output into two identical signals and momentarily hold one back while allowing the other to play in real time. The two signals are mixed back into one at the output. Usually you can control the length of the delay and the amount of the signal that is affected versus the part that stays "dry" (unaffected). This latter control—found on most effects—is usually called the level control.
So Rad...It's ok...To think that we were going to get all the campaigns and multiplayer for all the Halo's was amazing, and the game itself when it works is amazing just like it always has been, but I bought my Xbox One just for this game and the fact that it was broken for more than half a year is a shame and honestly unfair to the consumer, I still give it 3 stars since it works decently now but it lost its potential to be an amazing game....Lots of people seem to be having issues with multiplayer and campaign achievements; however, I have not noticed any campaign issues other than one time when I accessed a terminal it would not let me resume my game but after a restart I found I had just hit a checkpoint so no work was lost.

We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!

In the early 1960s Rickenbacker history became forever wedded to one of the biggest music upheavals of the 20th century: the invasion of the mop-top Beatles from Liverpool, England. The Beatles used several Rickenbacker models in the early years. Before the group broke up, John Lennon would own at least four. This love affair began in Hamburg, Germany in 1960 when he bought a natural-blonde Model 325 with a Kauffman vibrato. Lennon played the original (which was eventually refinished black but still easily identified by its gold-backed lucite pickguard) on all Beatle recordings and in all concerts until early 1964.
{"pageName":"[gc] pdp: in store vintage vintage 196s maxitone bruno sunburst hollow body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";113206695;;;;evar65=Vintage-Guitars-In Store Vintage","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
There are lot of great amp out there, but there are overpriced. Peavey prove they can do almost as great as other for a really more decent price. Moreover, they have great features and technical improvement that the "classic" manufactureres avoid to be focus on vintage sound and their reputation... The bandit 112 is a bargain. The valveking series was great budget valve amp for metal. Classic 30 and 6505 are interesting too. Vypr series was also great but it seems their recent series have issues... Anyway they build great amp and doesn't scam people as others do... check it out!
Electronics.  If your guitar comes with a pickup system (either from the factory or aftermarket) we will test it before it ships.  Poor sound, uneven string balance, and just plain component failure is all checked & corrected so you don't have to fool around with it. If your guitar's system requires a battery inside the guitar, we may remove it prior to shipping.
I built me my own custom guitar in high school shop class and it was simple i made an Ibanez RG styled body and a Randy Rhodes/Alexi Laiho styled body just so i can swap the 2 when ever i want and i can say the cons are waaaaaaay over exaggerated cause it was VERY cheap to do it i spent a total of $350 to do it and thats even with the the EMG 81's i have in them. I mean yes its only a 1 pickup guitar on each but its how i want the wood was only $60 for an Ash body (thats for both of them not each) and i have a hook up to get free mahogany that i used on the neck for it and mine noooo one could tell the difference between an actual Ibanez RG or ESP Alexi Laiho's signature guitars the only thing that they were able to know it was custom was the head stock being my signature and the parts that were on it and color option i used is NOT used by ether of them but the time is spot on it took 3 months for me to do them but this was of course all during the course of 45 mins for 3 months so it would of been much faster without it being in school but then again i also sort of cheated with mine cause i have been doing carpentry work since i was 8 so i already knew how to do everything professionally
You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.
{ "thumbImageID": "AEG10II-Cutaway-Acoustic-Electric-Guitar-Brown-Sunburst/H90906000005000", "defaultDisplayName": "Ibanez AEG10II Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst", "sku": "sku:site51500000177720", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10II-Cutaway-Acoustic-Electric-Guitar-Brown-Sunburst-1500000177720.gc", "skuImageId": "AEG10II-Cutaway-Acoustic-Electric-Guitar-Brown-Sunburst/H90906000005000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Blue Burst", "sku": "sku:site51351266816764", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10II-Cutaway-Acoustic-Electric-Guitar-Transparent-Blue-Burst-1351266816764.gc", "skuImageId": "AEG10II-Cutaway-Acoustic-Electric-Guitar-Transparent-Blue-Burst/H90906000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51351266816519", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10II-Cutaway-Acoustic-Electric-Guitar-Black-1351266816519.gc", "skuImageId": "AEG10II-Cutaway-Acoustic-Electric-Guitar-Black/H90906000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Many guitars (even new guitars) need the frets leveled in order to play buzz-free with low action. Most electric guitars with bolt-on necks come from the factory with high tongue frets. Doing great fret work is a learned art, and I guarantee that you will be happy with mine. All my fret work jobs are performed with the guitar mounted in a neck jig that simulates string tension. This allows very accurate work. Re-fret jobs include leveling the fretboard if needed.
OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.
Gibson guitars are the produce of the Gibson Guitar Corporation which produces guitars and other musical instruments which sell under a variety of brand names. Gibson Guitar Corporation was founded in the year 1890 by Orville Gibson in USA. It is a mass producer of the Guitars and is the most widely used guitars in the world. Gibson guitars are exported all over the world and are considered as one of the best guitar brands in the world. Gibson Guitars actually are the giant guitar company which also owns other brands of guitars. Some of the popular brands which are owned by Gibson are Baldwin, Epiphone, Kramer, Maestro, Slingerlands etc.
Every year we bring a new opening act on tour with us, and every year I have the harsh task of going on stage after some of the finest players in the business. This summer’s tour was no exception. With Montgomery Gentry in the support slot of the Toby Keith Biggest and Baddest tour, I had my work cut out for me. Two of the best axe slingers the music scene has to offer—Frank Bowers and Bo “two-timechampion” Garrett—have some of the greatest chops and sounds on the circuit today.

Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.

Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.
Aaron Staniulis is not only a freelance live sound and recording engineer, but also an accomplished musician, singer, and songwriter. He has spent equal time on both sides of the microphone working for and playing alongside everyone from local bar cover bands to major label recording artists, in venues stretching from tens to tens of thousands of people. Having seen both sides at all levels gives him the perfect perspective for shedding light on the "Angry Sound Guy." You can find out more about what he’s up to at
• Brute force game : Offers the same realistic engine that can be found in STRUMMED ACOUSTIC 1 and 2 – ideal for chord accompaniment. It also contains riffs and a new game mode by picking Picking: just play a chord for creating very convincing arpeggio patterns. Reproduction of these new types of patterns should be completely familiar to users of STRUMMED ACOUSTIC.
Integrated MIDI Learn and automation tools streamline your workflow, while the dedicated Live View makes GUITAR RIG 5 PLAYER the perfect companion when performing. A range of versatile built-in tools assist you in the studio and on stage: A Metronome with different syncing options, two Tapedecks for easy recording and play-along, a Tuner and a Preset Volume tool with Dry/Wet settings are all at your disposal.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
It was also in January of ’64 that the Westheimer Sales Company, 1414 South Wabash Avenue, Chicago, began advertising its New Kingston, the “S” line of quality guitars. These double-cutaway guitars included the #S-1 single pickup, #S-2 double pickup, #S-3 three pickup, the #S-2T double with tremolo, and #S-3T with tremolo. These were most likely versions of the little MJ and WG guitars.
Footswitches allow for handsfree control of your multi-effects pedal, so having more of them is good, as long as you're OK with the added bulk and weight that they require. Some processors have a stompbox mode feature that lets you utilize footswitches much like a traditional pedalboard, but most of the time the switches serve as preset selectors, along with other secondary uses.

However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.

Fender instruments like the Stratocaster and Telecaster feature bolt-on necks and brighter tonewoods such as alder for the body and maple for the neck. They are easy to work on, and an owner with even a small degree of technical knowledge can fit replacement parts without professional assistance. Fender guitars are built to a 25.5-inch scale length, which lends to their brighter, more percussive tone. You’re more likely to see tremolo systems on this type of guitar, and hot-rodded guitars known as superstrats fall into this category.
The Estimated Values shown on each web page are out-of-date in many cases. One person cannot possibly keep every page up-to-date, so that is why we created a Wiki system to allow anyone to help maintain the database. We invite anyone who sees a problem with any Estimated Value to report it to us by clicking the Report A Problem icon at the top of each page (it looks like this ).
I have played a ASAT Telecastor Bass for about thirteen years. I keep purchasing other bass guitars for many other reasons. But I have sold them all. I am down to just one bass that's all I need with my G&L, it very responsive, it has many opitions with pick ups and the action is good. It took along time for me to figure out how to use the pick ups because there is so many different ways you adjust it. They are built with better quality parts than a fender. They are numbered from the factory in america. But watch out for the Tribute series that is fake or cheap want to be G&L. A real G&L will be a little more expensive but the quality is excellent
Fawned over by hard rock-loving guitarists the world over, Marshall is one of the few amplification brands that really needs no introduction. And if you’re looking for aggressive, overdriven rock – this amp is one of the best beginner’s options. What makes this one really special, however, is the sheer number of sound-shaping options it gives you – thanks to its ability to model a whopping 14 MST preamps, 4 MST power amps, and 8 MST speaker cabinets. That’s 448 possible combinations, if you’re keeping score. You can even connect it to your computer via USB or use it as a Bluetooth speaker. If versatility is your top concern (it probably should be), look no further.
Two other totally new guitars debuted in November of ’88, the ST-3 ($225) and ST-4 ($235). These were both Strats, with maple necks, rosewood fingerboards, volume and two tones, five-way select, chrome hardware, SAT non-locking vibrato, in black, white or red with graphics. The ST-3 had three single-coils, whereas the ST-4 had a ‘bucker and two singles. Cases or gig bags were extra.
1.  And now for my favorite customer fix… A re-glued bridge on an acoustic using Gorilla Glue and wood screws.  This is an epic failure on so many levels.  Wood screws should never be used to hold a bridge on (Gibson, take note) .  And anyone who has ever used Gorilla Glue knows it has no place in guitar construction/repair.  It’s a polyurethane glue that works very well in certain circumstances (water contact, etc.) but the foaming that occurs when the glue is curing can create a humongous mess.  Fix:  Take the bridge off and refinish the top.  What could have been a $85.00 repair is now over $400.00.
The one-man band has been elevated to new heights lately, but behind the loopers and pads, there usually lies an unremarkable musician. Australian songwriter Tash Sultana brings a widescreen pizazz to the format. Her sprawling, expertly weighted amalgamations of hip hop beats, soothing synth pads and foil-wrapped shimmering tones, give way to surprising bursts of scuzzy, shred-y solos, creating an exhilarating contrast to her breathy vocals. A talent that doesn’t decay with the delay pedal.
Kay was best known for its mid-priced guitars, (i.e., quality guitars priced below top-of-the-line instruments like Gibson and Gretsch models) as well as its budget instruments. Kay made guitar models for its own brand name and guitars branded as Silvertone for Sears, Sherwood and Airline for Montgomery Wards, Old Kraftsman for Spiegel, Custom Kraft for St. Louis Music,[2] Truetone for Western Auto,[3] 'Penncrest' for JC Penney, etc.[16] Also, Kay produced a line of archtop acoustics called Kamico.
Clean or replace jacks. To clean jacks use solvents such as contact cleaner or other solvents as a spray and spray the metal parts, clean any excess solvent with a rag. To replace jacks first obtain a similar one that complies with your guitar, then soldering in properly. Work in well-ventilated space to avoid harmful fumes from solder or solvents.
Guild began in New York in 1953 but eventually moved to Rhode Island. Fender purchased Guild in 1995. Fender seemed only interested in Guild as a brand of acoustic guitars. The classic Guild electric guitars were not being made at first. But then some of the classic electric models were re-introduced. Cordoba Music Group (makers of classical guitars) purchased Guild and sells both electric and acoustic models based on the old designs.
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.

Guitar amplifiers generally incorporate at least a few effects, the most basic being tone controls for bass and treble. There may be some form of "overdrive" control, where the preamplifier's output is increased to the point where the amplitude overloads the input of the power amplifier stage, causing clipping. In the 1970s, as effects pedals proliferated, their sounds were combined with tube amp distortion at lower, more controlled volumes by using power attenuators, such as Tom Scholz's Power Soak, as well as re-amplified dummy loads, such as Eddie Van Halen's use of dummy-load power resistor, post-power-tube effects, and a final solid-state amp driving the guitar speakers.
Fawned over by hard rock-loving guitarists the world over, Marshall is one of the few amplification brands that really needs no introduction. And if you’re looking for aggressive, overdriven rock – this amp is one of the best beginner’s options. What makes this one really special, however, is the sheer number of sound-shaping options it gives you – thanks to its ability to model a whopping 14 MST preamps, 4 MST power amps, and 8 MST speaker cabinets. That’s 448 possible combinations, if you’re keeping score. You can even connect it to your computer via USB or use it as a Bluetooth speaker. If versatility is your top concern (it probably should be), look no further.
Soft and soulful is the second name of Fender guitars and basses. They are famous for their fruitful and enchanting tone. It is one of the most recognized brands in the world. Every note that is played on this guitar is pleasant and pure. There are two factors that contribute to such a thrilling tone. Firstly, the majestic shape of the 'strat' in resonating wood and secondly, the perfect configuration of three pick ups. The pick ups are usually singe coiled. However, there are cases where double coiled third pick ups have been used. Fender is a very popular guitar brand, and artists like Eric Clapton who plays extremely soft music, and heavy metal bands such as Iron Maiden have also used the same brand. Models like Stratocaster and Telecaster have etched their names among the greatest guitars ever made. Fender offers myriad of designs, styles, and configurations. If you are a beginner, then go for any Fender model, it's probably the best guitar for novices or amateurs.
Explorer-style guitars dropped off the radar after the mid 1980s, but were revived again under the influence of late Pantera guitarist Dimebag Darrell Abbott toward the end of the ’90s. Weird shapes were back, if anything can ever be said to be “back.” What goes around comes around. There’s clearly an algorithm going on that originated back in 1958!

Two of the strongest reasons to buy an acoustic guitar are user-friendliness and price. Some musical instruments are prohibitively expensive for beginners, and they’re difficult to learn, too. Not the acoustic guitar. Acoustic guitars are easy to learn, easy to carry, easy on the ears. And you can buy an acoustic guitar for an affordable price. The most difficult challenge in purchasing an acoustic guitar is finding the ideal fit for you. In this shopping guide, we will discuss some important elements to consider when browsing the acoustic guitar market.
But for all its light weight, this classical guitar shows off a stunning cedar top and rosewood fretboard. The inlay is just as elegant, and to keep the guitar’s profile looking good, the neck has a 3-ply construction style to prevent warping. The guitar has a matte finish, which gives it an “old-school” appearance, and the matte finish is great for photo sessions: no glare.
So, I’m 50+, I’ve never played a guitar, and I’m trying to decide on an electric guitar. I’m less concerned with the brand name, more concerned with high quality and workmanship, and last, I like the tone of the guitars played by the late Pete Ham of Badfinger (especially Baby Blue), and Joe Walsh. I know Ham played a cherry red Gibson SG standard, but I’m seeing quite a few mixed reviews on the quality control and workmanship of the current SGs. I listen to a lot of jam band music (i.e. Widespread Panic) and enjoy the rhythm guitar best. So, where to start and stay under $2000 to get a guitar that will produce the type of sound I’m looking for?
The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.

Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.
It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.

The chorus effect sounds like a lush underwater soundscape that is created by doubling your guitar signal and slightly shifting the second one out of time and pitch with the original.  This effect can be very subtle, which sounds as if you’re playing out of two different amps separated in space, or highly modulated to sound as if two different players are playing the same part at the same time.

Intonation is difficult since the bridge is a bar of metal with grooves cut into the top. The whammy bar works and provides a nice warble in a limited range. Action is a bit high at the moment, and adjustment is limited to bridge height unless I shim the neck (no truss-rod adjustment is obvious). Still, the short scale and light strings make it easy to play anyway.
Winner of the prestigious Music Inc. Product Excellence Award, 2017, the HeadRush Pedalboard Guitar Amp And FX Modelling Processor wholeheartedly deserves a spot on our best multi FX pedals list, thanks to the huge amount of effects within as well as its vast array of amplifier, cabinet and mic models. This is one of the best options for working musicians, yet still remains affordable.
Dismantled Fender Telecaster neck pick-up, showing the exposed enammeled, very fine, copper wire, wound on a bobbin around 6 magnets sitting below each string. From Mojo Pickups - 50's Telecaster Rewind. In case you are wondering the metallic case (used to be high-chrome content alloy) acts as a hardware low-pass filter, dispersing the magnetic field of the high frequency vibrations of the string across all 6 poles, but allowing long wavelength, low group velocity, bass frequencies to be captured relatively unhindered— the reason for this is quite complicated and the subject of a solid state physics class which we will not go into here.
On the way folks arriving soon stay tuned pics of this made in Japan hand crafted beautiful Exotic Vintage Martin copy will be uploaded soon ... in great players condition original and stock Takamine pickup installed you can plug in at the strap pin jack and go electric and sounds amazing or fully acoustic of course unpluged. You know theses are know for the ultimate beauty of them as well as the Rich complex tone they offer well seasoned instrument of this caliber Japan had to offer in the Lawsuit series days 70-85 or so that have been discontinued decades ago as they say they don't make um like this any more... Stay tuned for another exotic Brazilian Rosewood guitar at any questions for Joe email:

Trim:  Heel cap: ebony. Fingerboard: ebony bound in white celluloid with scalloped lower end; 24 frets under A and D, 21 nickel-silver frets under G and C; single abalone dots behind 5th, 7th, 9th, 10th (slightly larger), and 15th frets; double mother-of-pearl dots behind 12th fret. Nut: bone. Bridge: mahogany capped with ebony; nickel-silver-plated steel screws to adjust bridge height and pickup contact. Tuners: six nickel-plated steel, worm-gear machine tuners by Grover with convex head surfaces and decoratively cut plate outline. Endpin: black bakelite; extends through tailpiece. Pick guard: imitation tortoise shell plastic raised on wood brace affixed to top with two steel dome-headed screws. Lacquer: dark orange-brown sunburst.

The company makes four models, the FS (fingerstyle), GC, D, and the Jumbo, each retailing at a flat price of $8,880 as of September 2011, making them amongst the most expensive new guitars in the world. The company also provides the option for customized furnishings such as exotic woods, buffalo horn nuts and saddles, mammoth ivory bridge pins and nuts, and specialized inlay and cutaway designs etc for an additional fee. The customized Petros guitars made of rare woods such as African Blackwood, Ceylon Satinwood or old flitch matched Brazilian Rosewood are sold for an extra $4,000 which with other furnishings such as ivory bridge pins can fetch over $13,000 in total.[2]

It looks cheaper the more I examine it... super easy to play though. the truss adjustment bolt is far enough back from the sound hole that I could only reach it with the longer end of the crappy allen wrench I found, and then the tiny end I had left couldn't really leverage. I'll have a few more of those (better ones) once I clean my place though. The saddle barely pops out from the bridge but the bridge has this weird curve that makes the string angle like normal to the pins. Just poked my hand in and its not even X-braced. I'm sorta confused. It's different.
Completely agree. A couple years ago I was also wanting a software guitar to play some simple chords over a track. Instead I spent about $140 on a guitar from Craigslist. A couple weeks and a couple dozen YouTube tutorials later and I was able to play the chords myself. Learning to play the instruments is a valuable skill that will separate you from others who just use software.

So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
Whether you are an acoustic or electric guitar player one of the simplest ways you can add some dynamic or sonic change to your worship set is by stepping on an effects pedal at appropriate moments. However, if you are new to the world of pedals there seems to be endless choice of single or multiple effects units (and no, you don’t need as many as are in the photo!). Whilst multi-effects offer loads of sounds in one box, they can be hard to programme and difficult to adjust quickly on stage. There’s a million things written about effects pedals out there in Googleland but if you’re brand new to this here’s a potted overview of some of the most popular types.
The way you connect your amp, speaker and DI box depends on whether the DI box has a built-in dummy load.If miking isn't practical, or you don't want to find space for a soundproof speaker/mic box, then perhaps one of the available DI options will give you the result you need. I was once reviewing an analogue guitar preamp that provided several programs, both clean and overdriven, and I noted that one of the clean settings sounded really superb. When I checked the manual, I found this was the bypass position! The reason it still sounded good was that the unit was matching the high impedance of the guitar to the medium impedance of the recording system and, for clean sounds, you can get this same effect by using any good-quality active DI box that offers a high-impedance (500kΩ or more) input. A little compression will add density and 'spring' to the sound (experiment with the attack time to get the best 'pluck' sound, as too fast an attack can squeeze all the life out), while reverb will put back the missing sense of space.

Another tone control we almost all come in contact with is the amplifier tone stack, as sketched out in Figure 3. A sequence of evolution at Fender led up to the 1957 Bassman becoming the prototype for most amplifiers’ Treble/Bass/Mids control knobs. Marshall and Vox used a similar system. The amplifier “tone stack” is just that – a stack of two or three potentiometers which provide treble, bass, and sometimes midrange controls.

In ’74, Ibanez, which was by then leading the copy pack, followed the suggestions of Jeff Hasselberger and changed its designs by squaring off the end of the fingerboard and lowering the neck into the body to look and play more like a Gibson original. Virtually all Japanese manufacturers followed. Since Univox guitars were primarily made by Aria, it is probable that in late ’74 or ’75, Univox guitars also had these features, although the Gimme shown in a 1976 flyer still has the rounded fingerboard, and this was in a 1980 binder, so you can’t be too rigid in evaluating Univox guitars based on these details.
Here at Dave’s Guitar Shop we are proud to have a staff of world class Guitar and Amp technicians. Be it simple guitar setups, restrings, grafting on broken headstocks or restoring timeless classics our techs work at the highest quality. With a shared experience of over 50 years and access to one of the largest collections of historic guitars for reference you can rest assured that your repair or restoration will be completed accurately and with great care and precision.
Tremolo – Not to be confused with a tremolo bar (which is closer to the Whammy pedal), this effect works on volume. You can think of tremolo pedals as being like strumming a note, and then wiggling the volume knob on the amp while it’s ringing. Usually, the pedal will have controls for speed (equivalent to how fast the volume is “wiggled”) and depth (equivalent to how far the knob would be turned).
The full-size Davidson guitar features a maple fretboard consisting of strings that sound very pretty good once you have tune it right out of the box. This Davidson full-size electric guitar comes with die cast tuners designed to keep it in perfect sound shape, followed by a practice amp having an overdrive body, which makes the practice exercise easy and fun-filled. The amp can be tuned with an iPhone App and by the time you set this baby to work, you will surely get your neighbors screaming for the peace.
You’ll find a full slate of dedicated bass stompbox effects as well as many multi-effects pedals and processors. Like their guitar-friendly cousins, bass effects offer most of the same tone shaping capabilities, including chorus, reverbs, delays, phasers, and tremolos. Because of the bass’s unique sound dynamics that reach deep into the lower frequencies, many bass effects are focused around compression and limiters that help keep a lid on destructive subsonic sound waves that can damage gear. Typically, many guitar effects are not optimal when used with a bass.
The neck is also made of mahogany and is hand set into the body. Looking at the fretboard, we see a standard rosewood design with white binding and classic trapezoid inlays. Epiphone went with a set of Alnico Classic humbucker pickups. These are very close to what the original Gibson solution had to offer. Classic rock and blues just flow out of these, although you are more than free to crank up the gain and blast some heavy riffs.
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.

Gibson guitars are the produce of the Gibson Guitar Corporation which produces guitars and other musical instruments which sell under a variety of brand names. Gibson Guitar Corporation was founded in the year 1890 by Orville Gibson in USA. It is a mass producer of the Guitars and is the most widely used guitars in the world. Gibson guitars are exported all over the world and are considered as one of the best guitar brands in the world. Gibson Guitars actually are the giant guitar company which also owns other brands of guitars. Some of the popular brands which are owned by Gibson are Baldwin, Epiphone, Kramer, Maestro, Slingerlands etc.

The EJ-200SCE is a great acoustic under $500. With a spruce top and maple body, it offers a great tone for the money. It comes highly recommended from other owners, who say it sounds as good as a Gibson for 1/10 of the price. It also has an onboard pre amp with a built in tuner for plugging in. It’s perfect for playing gigs or at church. It has the SlimTaper neck which will be very easy to form chords on with smaller hands. The cutaway is nice for getting those up the neck solos easily, and of course it looks great as well. Check out more pictures of this guitar here.
Leslie West (real name: Leslie Weinstein) first made his mark in mid-Sixties garage rock, with the Vagrants' meaty cover of Otis Redding's "Respect." By 1969, West was the heavy vengeance in the Cream-like quartet Mountain. On songs like the 1970 hit "Mississippi Queen," West played roughened blues lines with deceiving facility and an R&B flair, through a black forest of stressed-amp distortion. "The riffs were incredible," says Dave Davies. "He could play flashy, intricate phrases. But he wasn't a look-at-me guy. He played with feel."
Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. 
As we mentioned, this is both a multi-effects unit and an amp modeler. Like the Boss ME-80, you can use it in a regular editing mode where you set up your signal chain using buttons and knobs, or “Pedalboard Mode” which when activated lets you turn 5 effects on/off via the 5 footswitches along the bottom, much like if you had separate pedals on a pedalboard. This is a nice bonus if you play live and want that immediacy. To sculpt your sounds, you use the small up and down arrow buttons to cycle through your effect types, or slots. You’ve got WAH, COMPRESSOR, DISTORTION, AMP/CABINET, EQUALIZER, NOISE GATE, CHORUS/FX, DELAY, REVERB, and EXPRESSION (which sets what your expression pedal is used for, like wah or volume) available for use. For each type, you can cycle through which effect models you want. There are a ton to choose from, over 70 by our rough count. The DigiTech RP500 probably has the most comprehensive list of all the classic effects, from Tube Screamers, to Pro Co RAT, DS-1, Fuzz Face, Boss CE-2 Chorus, EHX Small Stone Phaser, and many more. All the classic amp models are there too, like Vox, Marshall, and Fender, all with appropriate cab models. If you have your own amp or just don’t care for the amp and cabinet modeling, you can bypass it which leaves you with just stompboxes and effects.
I'll start off by saying I am a novice guitar player. I've been playing off and on for 30 years, but more off than on. I've been playing on a hand-me-down Yamaha acoustic that was once a great guitar, but through many years of moving, poor storage and not doing anything other than the occasional set of new strings, that Yamaha just did not play well. One reason I was so off and on is that I could never get a clean sound from the Yamaha. I just thought I was not capable of learning guitar. Then, about a year ago, I tried out a friend's Fender acoustic and, after apologizing in advance for my poor playing ability, found that the same chords I struggled with on the Yamaha sounded crisp and clean on my friend's Fender, and I didn't have to make my fingers bleed
In 1968, Jimi Hendrix talked about his love for a Houston blues luminary who wasn't known outside the region: "There's one cat I'm still trying to get across to people. He is really good, one of the best guitarists in the world." Albert Collins, who died of lung cancer in 1993, played with his thumb and forefinger instead of a pick to put a muscular snap into his piercing, trebly solos. His fluid, inventive playing influenced Hendrix, sometimes overtly: Jimi liked Collins' sustain in the song "Collins Shuffle" so much that he used it on "Voodoo Chile."
Alembic | Baldwin | BC Rich | Burns | Crucianelli | Danelectro | Egmond | Eko | Epiphone | Fender | Framus | Futurama | Gibson | Goya | Gretsch | Guild | Guyatone | Hagstrom | Harmony | Hofner | Ibanez | Kalamazoo | Kay | Kent | Kramer | Levin | Martin | Magnatone | Microfrets | Mosrite | National | Ovation | PRS | Rickenbacker | Silvertone | Supro | Teisco | Yamaha | Valco | Vox | Wal | Zemaitis
Gretsch: Here’s another company that has been making instruments for over 100 years. Of German descent, Gretsch was established in Brooklyn in 1883 by Friedrich Gretsch. The company didn’t start making guitars until the early 1950’s when electric guitars actually became popular. With origins on banjos and mandolins, Gretsch has always been big in the country market. The endorsement by Chet Atkins has helped further cement this. Another very popular endorsee, Brian Setzer, has helped Gretsch hollowbody guitars earn a rightful place in guitar history. Like Gibson and Fender, they also produce basses, acoustics and amplifiers. Furthermore, Gretsch has a hugely successful line of drums. In 2003, Grestch set up an agreement with Fender essentially handing over the control of manufacturing and distribution. Most Grestch’s tend to be up in the pricier range. For more affordable Gretschs, look into the Electromatic series.
The idea behind a piezoelectric pickup is more or less the same as with any regular electric guitar pickup. Guitars which utilize this system have a piezoelectric pickup located under the bridge. Once you pick a string, the sound vibration from the string is then interpreted by the pickup, generates an electrical signal, and is then fed into the preamplifier to be boosted to line-level.  You can think of it like a microphone's diaphragm.
Two and a half steps down from standard tuning. Used in Swedish death metal by bands such as At The Gates, Dismember, Edge of Sanity, Entombed, Amon Amarth, and Arch Enemy (during the Johan Liiva era), as well as Fear Factory, Carcass, Type O Negative, Cathedral, Seventh Void, Fleshgod Apocalypse, Sepultura, Five Finger Death Punch, Soulfly, Within Temptation, Triptykon and guitarist Kirk Windstein of Crowbar and Kingdom of Sorrow.
Guitar picks are really cheap, maybe $.25 to $.50 each. The best way to know which kind you like best is go to a music store and buy $5.00 worth of picks of different thicknesses, sizes and materials, take them home and try them out over the course of the next several weeks or months as you learn to play. There is no right or wrong answer to this question, its all a matter of personal preference. You'll figure out for yourself which you like best.
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.
The explanation for this "asymmetrical" tuning (in the sense that the maj 3rd is not between the two middle strings as say in the tuning of the viola da gamba) is probably that the guitar originated as a 4-string instrument (actually an instrument with 4 double courses of strings, see above) with a maj 3rd between the 2nd and 3rd strings and that it only became a 6-string instrument by gradual addition of a 5th string and then a 6th string tuned a 4th apart:
The specs for this stripped-back Singlecut are identical to PRS's gloss Standards; the difference is in the paint - or, rather, the lack of it. Instead of that faster S2 gloss, here we have a nitrocellulose satin finish that doesn't bother with grain filler - you can easily see the body wood's grain and feel it on the neck - for a thinner finish, which will wear and age the harder you play it. Plus, thin finishes don't choke any vibrations or resonance. Along with the dot-only fingerboard inlays, this Satin Singlecut looks very workmanlike, but the build and parts still deliver the goods. The body is one-piece mahogany, the neck three-piece. The bridge is the USA Stoptail, the locking tuners, like the pickups, made in Korea to PRS specs. The pattern regular neck is a nice mainstream handful, and setup and intonation are, as ever, top-drawer. Mahogany guitars can be dark-sounding and here, yes, there's a throaty midrange focus, but a clean-edged ring and resonance that provides clarity and punch, much like the pickups that nail an almost P-90-ish sizzle and classic-rock poke. The four-control layout means there's plenty of adjustment, and the coil-splits on the tone controls add authentic single-coil cut. Clean, low, medium or high-gain, this one's a banker: the most rock-out, resonant blue-collar PRS we've ever played, and that's why it's one of the best electric guitars, especially at this price point.
It also has an overwhelming amount of sheet music in it. These music sheets allow you to practice what is being taught in the given chapter, which is nice, but going through the books, I felt there was a lot left unexplained. This was probably a result of them trying to simplify things as much as possible, but this actually leaves holes in the padawan guitarist's knowledge.
This guitar is the J Mascis signature, specifically spec’d out by the man at an affordable pricepoint. Jazzmasters will never not be cool, in part because their versatility tends to exceed expectations. Like the Modern Player Tele above, Fender leveraged much-improved Chinese production to bring this in under $500. They also opted for lesser P90 pickups compared to the expected (and usually truly excellent) proper Jazzmasters, but many players won’t notice this.
: This vintage YAMAHA is one of the greats folks and here for your serious consideration today at Joe's Vintage Guitars.... This is the Classic Vintage Yamaha FG-200 - Nippon Gakki body seems the same specs as the famous FG180...hummm? interesting She's been lovingly played for nearly 40 years,its beautifully aged now with a great feel & patina only found on real vintage guitars of this age and caliber. This guitar really has nicely opened up over the past 40 years and you just don't get booming bassy tone like this one with a new guitar thats for sure. This example is not mint but is beautiful in its own right, it does have a few nicks, dings and wear but nothing really bad at all really she just looks the part of the 40 year old Martin D28 vintage guitsr. A lot of guitar for not a lot of cash... Vintage aint goin down..get her at a great price today! Let me know...thanks for your interest, Joe email me: This is an early one from the Nippon Gakki plant and has a surprising boom even for or a 200 same as our great old red lable FG180 for that matter with no real decernable diference. I cannot find a serial number but is believed to be late 60's - early 70's This old girl has Excellent low end sound!!! and tone on this guitar is wonderful - it really booms! Condition: Average vintage wear wich includes minor pick wear, scratches dents & dings for an old vintageguitar. but no cracks to be found, straight neck, trussrod is functioning properly, very good frets still playing well all the way up & down the fingerboard with no funny buzzes or dead spots... Frets 1 - 5 ( cowboy cord area )have medium play wear but still plenty of life remaining no problemo. action is very good at 3/32 1st E string @ 12th fret. Tuners are the original and in excellent working order. Bridge plate is securely fastened to top. We have just as a precationary installed A PlateMate brass plate has now been installed to any prevent further wear to bridge plate which is common among these vintage guitars. This brass plate has also contributed to its big booming tone now is even a more rich sounding competitor to a vintage Martin D-28... FRESH SET UP...with Martin Bone & Saddle... this guitar is a wonderfull fun guitar to play lots of bang for the buck factor here.. This guitar is overall a very solid well built guitar that is standing the test of time it also is a great sounding vintage guitar that plays very nicely. Ya can't go wrong with this wonderful vintage Yamaha FG Nippon Gakki guitar Has a new bone saddle and Martin Silk Steel strings. No case included but will protect and properly package for shipping. PlateMate product works very well and is easily removed if desired. To my ear it enhanced this boom-box's sound quality and is described by the manufacturer as follows: If you want to protect and enhance the sound and tones and balance out string volume of your acoustic guitar, Mitchels Plate Mate is the way to go. Mitchels Plate Mate is a small piece of brass that is applied without using or altering of tools, and is installed as fast as you can change a set of strings. This was invented and patend mainly to prevent damage caused by ball-end strings on the acoustic guitars bridge plate, it is also proven to enhance volume, tones, and balances out string volume by one of the best acoustic guitar makers in the world. Mitchels Plate Mate will protect your guitar from ball-end strings pulling up threw the bridge plate and possibly cracking the bridge or pulling the bridge off the top of your guitar which would be a very expensive repair bill. It also protects your bridge pins, and saddle by making the string windings stay down in the string holes where they belong. I have used Mitchels Plate Mate in guitars priced from $100 to $50,000 it doesnt matter the price just protect your prized posetion or investment. .
When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
Everyone listens to music for different reasons. The transition of 'acknowledgment' to 'love' of an artist or song is an entirely unique experience, starting from smell, location, time of day, time of year, repetitions over time etc., that triggers interest. Obviously, anyone who bashes John Mayer is stuck on radio feeds and needs to explore his music before judging on pop tunes, and almost all Hendrix aficionados are late adopters that buy trends (a marketer's dream).
And again. the no-brainer: your guitar just plain sucks.  If your bought your guitar at Wall-Mart for $19.99, PLEASE don't put my pickups in it!!!  Here is EXACTLY what you should do with it: keep it around until you are playing your first big club gig and you need to do something extraordinary to get the crowds attention.  As you thrash away on the final chord of the last song pick up THIS guitar, douse it heavily with lighter-fluid and light that puppy up!  Now that's getting more that 20-bucks worth of wow-factor out of that pile of Chinese dog-dung!
Some effects, such as flanger, wah-wah, and delay, are obvious to the ear. But others, such as compression, reverb, and even distortion, are core elements of your tone, so you might not always notice these as “effects.” But used artfully, or sometimes even just correctly, they can take you to tonal utopia. Even if your personal style doesn’t call for mind-altering sound, you can still improve your sound by using effects.
Not to say that other sounds don’t have their place: the total freakout—sometimes very, very cool in itself—of a second-rate tube amp pushed way past its normal operational capablities; the smooth, pliable, ultra-saturated sound of a cascading gain preamp; the cheesy, buzzy fizz of a cheap tranny amp slammed with too much gain and clipping to beat the band… Any of these can yield the godlike tone of the day in the right application, with the right player. But think Page, Hendrix, SRV, Blackmore, Eric Johnson, Clapton, Van Halen, Gary Moore, and it’s cranked vintage amps and touch that are producing the tone. They were often aided by some type of distortion pedal, sure, because that was the only way to switch textures between verses, choruses and solos, or to push the big amps into distortion at less than full volume. But who wouldn’t choose to get their rock overdrive sound from a 50W 1968 Marshall Plexi on ten, or their blues lead sound from a tweed Bassman on 12, if the ears and the noise police would stand for it? For most players in the broad spectrum of rock, even those usually chained to the back of the stage hacking away at a clean rhythm part, these yield the sweetest, most tactile, touch-sensitive and playable tones available. Get that amp cooking to where the riffs get juicy and fluid and effortless, sustain and harmonic feedback hover into view at the tap of a fret, and the preamp and power amp tubes’ race to keep up with the pick attack lends a comforting softness and compression to the feel (a sensation further enhanced by the natural sag of tube rectification, where present). Mmmm. You can almost feel it now. If we could only get that play-it-all-day vibe at tolerable volume levels, any time we liked.
Perhaps the most famous of these sounds—or, at least, the most formative—is that of Dave Davies, the lead guitarist for The Kinks, who got bored of his Elpico amplifier in 1964 and decided to pierce its speaker cone with a razor blade. This effect, known as “clipping,” cuts off the audible waveform at the height of the amplifier’s limits (voltage, current, and thermal), thereby distorting the signal. Although Link Wray had been doing this since the late 1950s, Davies popularized guitar distortion in the first few moments of “You Really Got Me,” changing guitar music.
{ "siteName" : "/m123", "sourceCodeId" : "61001563", "sourceName" : "DIRECTLOADFORM123", "sourceSegment" : "direct", "richRelevanceMode":"render", "richRelevanceApiKey":"413c08763c06fde6", "richRelevanceUserId":"", "richRelevanceSessionId":"a9438a874b3f643826015539d38d85fe", "rrBaseUrl":"//", "rrChannelId":"-", "rrMobileChannelId":"586e31c42963afdf", "hashedUserIdForCriteo":"", "rrTimeout":"10000", "rrLoadAtgRecs":"false", "contextPath" : "", "JSESSIONID":"9qYR4FK6oBJZ-PTPDs-s9v33.mfbot04", "unicaEnv" : "site-devint", "staticContentUrl" : "", "styleStaticContentUrl" : "", "staticVersion" : "ecmd-2018.10.2-0g&cb=3", "versionParam" : "?vId=ecmd-2018.10.2-0g&cb=3", "customerService" : "888-566-6123", "profileID" : "6031423577", "powerReviewsUrl" : "", "contentKey": "site7AV", "isInternational": "false", "isWarrantyShippable": "true", "currencySymbol": "$", "profileCountryCode": "US", "profileCurrencyCode": "USD", "welcomeMat" : "false" } Skip to main content Skip to footer {"eVar4":"shop by department: guitars","eVar5":"shop by department: guitars: guitar value packages","pageName":"[m123] shop by department: guitars: guitar value packages","reportSuiteIds":"music123prod","eVar3":"shop by department","prop2":"[m123] shop by department: guitars: guitar value packages","prop1":"[m123] shop by department: guitars","prop10":"category","prop11":"guitar value packages","prop5":"[m123] shop by department: guitars: guitar value packages","prop6":"[m123] shop by department: guitars: guitar value packages","prop3":"[m123] shop by department: guitars: guitar value packages","prop4":"[m123] shop by department: guitars: guitar value packages","channel":"[m123] shop by department","linkInternalFilters":"javascript:,","prop7":"[m123] sub category"} false
In the fall of 1964, it's generally accepted that hide glue was replaced with white polyvinyl acetate PVA glue (Elmer's) after the move to the new Martin build facility. (But hide glue was still used until the mid-seventies for gluing tops to the rim and in some other situations.) A notation was written in Grant Remaley's personal memos on Sept 29, 1964 indicating Martin was starting to use "cold" glue. It is generally thought the type of glue used does affect the sound of the guitar. Starting some time in the 1980s Martin started switching from white glue to yellow aliphatic resin (titebond).
If you have been looking for an electric guitar that effectively blend tradition with modernity; the Gibson Les Paul Faded 2017 is the excellent choice that fit such description. This guitar stands as the perfect union between the old and the new—featuring a 490R modern and 490T humbuckers, closely followed with 22 frets designed for amazing bends and great feel.

Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.

Gibson Brands, Inc. is considered as an American producer of guitars and other instruments, which is located in Nashville, Tennessee. The brand was earlier known as Gibson Guitar Corp. The company was founded by Orville Gibson in 1902. They are famous for its innovative and superior quality guitars. They sell their guitars under different brand names. These guitars are available at little higher rates. The price range starts from Rs. 49,500/- onwards (approx). For more details, visit
The best thing about the guitar is the design and usability is perfect for the beginners, who have an idea that how to play the guitar. It also comes with a bunch of instructions that makes it even easier to use. Once you learn the basics and master it you can easily upgrade to a higher level guitar. It can give the right feel that required from a guitar.
With that in mind, we need to point out something about this piece of content, and others like it that we have written: These recommendations are based on the knowledge and opinion of real musicians. We are not marketers or internet gurus trying to make a buck off Amazon. Now, we do use affiliate programs to support this site and those who run it, but we are not simply throwing pedals up without knowing why we're suggesting them. The point is to provide a proper context for your purchase, which we believe is the best way to make a sale, anyway.
Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
A final tip: not a lot of people know this, but Antares Auto-Tune works rather well with electric guitar. Of course Auto-Tune is monophonic, so it will dutifully ignore chords and double notes, but it will come into play when it detects a single note. You might reasonably ask whether a guitar tuner might not be a wise investment, but the reason I suggest Auto-Tune is not to compensate for a badly tuned guitar, but rather to pull imprecisely bent guitar stings into pitch.
A typical digital multi-effects pedal is programmed, with several memory locations available to save custom user settings. Many lack the front-panel knobs of analog devices, using buttons instead to program various effect parameters. Multi-effects devices continue to evolve, some gaining MIDI or USB interfaces to aid in programming. Examples include:
Along with Taylor, C.F. Martin and Co. sets the mark for top-level American-made acoustic guitars. They’ve been around since 1833, and today they make most of their guitars in Nazareth, Pennsylvania. They use premium materials to get the best look and sound out of their guitars, but they’re also a leader in understanding the environmental impact of over-harvesting tonewoods.
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed. 

Two more guitars were introduced in 2008. Gibson USA issued the Slash Signature Les Paul Goldtop, modeled after a 1991 Gibson Les Paul Goldtop that was stolen from Slash’s collection in 1999 and never recovered.[37] It features a mahogany body and a hand-carved maple top with Gibson’s classic Bullion Gold finish. Production was limited to 1000.[38] Epiphone introduced a more affordable version of the Gibson model, featuring a traditional Les Paul body with a maple top, a mahogany neck with rosewood fingerboard, and Epiphone’s classic Goldtop finish. Production was limited to 2000.[39]

Equalizer or EQ pedals have traditionally been used to boost audio signals for solos. If you want to boost the middle frequencies, the EQ will do the trick and provide a tight tone. Some musicians don’t find boosters and EQ pedals to be necessary in a chain, so make sure you do some research to figure out if this type will really benefit your sound
A Twitter follower once asked me what electric guitar I’d recommend for a beginner with a max budget of around $200 total (for guitar, amp, tuner, etc.). So, I wrote a blog post for her where I recommended two all-in-one “starter packs” that are a great value for someone with such a low budget. The guitars in those starter packs are worth around $150, give or take.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
One last time we must put aside our expensive tastes and put up with the “economy” version of a guitar that is actually much nicer. The full-scale rendition of Steve Vai’s guitar is, in my opinion, legitimately worth every one of the nearly 300,000 pennies it costs. Per the Ibanez web site, there are a lot of Vai Signature models you can pick from:
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it. Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low! Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone. I was so happy and asked him how much, he said it was easy so he didn't want take any money. But i have him some coffee money and he said it was too much, I said it was for a week and he laughed. My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems. Steve is a hidden gem in the Boston guitar world.
Transistors are related to crystals. Their individual function is non linear and have to be arranged in compound groups to behave as a linear circuit. Solid-state amps operate at low voltages (10 - 100V). Valves amps operate at high voltages (200 - 600V). Speakers operate at approx (0 - 40V). The Output Transformer converts the high operating voltages of valves to the lower operating voltage of speakers. A transformer has 2 separate coils of wire (primary and secondary) wound around an iron core. Electricity flowing through wire causes a magnetic field around the wire and visa versa, a changing magnetic field causes electricity to flow through wire.
Fender Hot Rod Series Pro Junior III 15W 1x10 Combo - This tube-driven guitar combo with a 10” Eminence vintage-cone speaker reproduces the harmonically complex output and sensitivity to playing synamics that vintage Fender tone hounds love. Dual 12AX7 preamp and EL84 power amp tubes crank out the same celebrated midrange as vintage combos. Fender has updated the Pro Junior III with an external speaker jack, a more legible control panel, and internal tweaks.
PRS: One of the best guitar brand one can go for (if they don’t want to go for the custom-built route). Their guitars look beautiful and sound buttery smooth. They have the most beautiful looking tops and inlay among non-custom guitars. The craftsmanship and attention to detail on PRS guitars is just exquisite. Of course they do have their custom shop called Private Stock and the Private Stock guitars are so gorgeous and meticulously built that anyone who sees them will be awestruck by their beauty, not to forget the sound of those guitars are like the voice of angels.

However, these two companies were not always in as direct competition as might be assumed; yes they both made guitars, basses and amplifiers, but both tended to play to their strengths; Gibson's expertise was it's luthierie; they stuck to high end electric-acoustics, semi-acoustics and skillfully made solid bodies, whilst Fender excelled at electronics; they made amplifiers and easily built solid body basses and guitars.

Martin’s first truly electric guitars were the Style F thinline archtops which began in prototype stage in 1961 and entered production in 1962. The F Series consisted of three models, the F-50, F-55 and F-65, all with bodies slightly less than 2″ thick and made of maple plywood with bound tops. All three had shapes roughly reminiscent of the dreadnought that made Martin famous, though slightly exaggerated with a wider lower bout. The cutaways were fairly wide and radical, cutting out at almost a right angle from the neck. The glued in necks had unbound 20-fret rosewood fingerboards, dot inlays and the typical squarish Martin three-and-three headstock. Necks joined the body at the 14th fret. Each bore an elevated pickguard and had a distinctive moveable adjustable bridge made of clear plexiglass.
Some of the most impressive pieces of equipment come in small packages and in the shape of an item you would not expect to be as good as it is. The proof of this is the deceptively simple looking Mugig Portable Amplifier for Electric guitar, with 10W of power. This piece of equipment is on the big side of small, but is perfect in every single aspect of it, other than the size. The design is simple and understanded, the ease of transport is guaranteed, while the sound takes over the mind and heart of the musician and the crowd instantly. It is possibly the best electric guitar amp that I have gotten to mention on this list.
The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.
Tom Petty's lead guitarist for more than 40 years, Mike Campbell never clutters up a song with notes when two or three bull's-eyes will suffice. "It's a challenge to make your statement in a short amount of time," he has said, "but I prefer that challenge as opposed to just stretching out." Listen to the skeletal hook that holds "Breakdown" together or the laconic, tone-bending solo in "You Got Lucky" to hear Campbell's ingenious use of negative space. "Michael is not one to show off," Petty once said. "What he says is essential."

The Epiphone brand scores another spot in this list with the Hummingbird Pro, a stylized take on the popular dreadnought shape. This guitar is the affordable version of the original Gibson Hummingbird, as seen in the hands of big name artists like Keith Richards, Noel Gallagher, Sheryl Crow and many more. It is a modern and more cost effective take on the guitar that Keith used on many of The Rolling Stones' popular tracks, including "Play with Fire" and "Satisfaction".

I once did a setup on one that belonged to a friend but it was really wrecked so it wasn't perhaps a fair representation. It seemed to be well built though and the neck was nice enough. The tone was decent too although not exciting - exactly what you'd expect from such a guitar. Overall I'd say it was better than the cheaper squiers (SEs, Affinities etc).
yeah, i used to play the vht straight up sometimes. that amp was tonal sweetness, and had a tank reverb. if i dime it, i can get away with playing alot of stuff on the ac4. but i like having a little chorus for certain things, and i do a couple of songs that i would like to have a rotary pedal for, and although i'm not big on reverb, i don't mind using a touch of delay in place of it. if i did have a wah, i'd use it as a tone knob. oh, and i want a harmonizer. specifically, the eventide pitchfactor.
To build an electric guitar, start by cutting out the guitar body from a piece of wood like maple or swamp ash. Then, bolt a pre-made neck onto the body and attach the bridge. Next, install the pick-ups, volume control, and guitar cord. Finish by putting your strings on the guitar and testing out your instrument. If you want to make the process easier, you could try purchasing an electric guitar kit.
RARE Epiphone Vintage FT-150 Bard Lefty Conversion with bone saddle. Spruce top, rosewood back and sides. Medium to low action. Beautiful sounding and playing guitar. Superb projection. Rivals guitars costing thousands.In excellent cosmetic condition with normal fretwear for a guitar it's age, and tiny dings here and there but nothing that stands out and looks gorgeous. Includes original right-handed, adjustable bridge. Includes hard shell case and original right-hand adjustable bridge if you wanna convert it back to a righty!
For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.

Acurious phenomenon that ac-companies certain guitar compa-nies is an inability to translate success from one medium to another. For instance, Martin has never been able to transfer its reputation for high-quality acoustics to electric guitars. And Fender has never been able, on its own, to really succeed in marketing acoustic guitars. Instead, it purchased Guild.
Richard Thompson has been one of rock's most dazzling stylists since his days with Fairport Convention, a British folk-rock band that veered into English traditional music. Shooting out life-affirming riffs amid lyrics that made you want to jump off a bridge, he combined a rock flatpick attack with speedy fingerpicking. His electric-guitar solos, rooted less in blues than in Celtic music, can be breathtaking, but his acoustic picking is just as killer; no one knows how many tears have been shed by players trying to nail "1952 Vincent Black Lightning."
Additional mics can be used to capture different tones from the amp and/or some ambient room sound. When recording open-backed cabinets, great results can be obtained by using a second mic at the rear of the cab. When this technique is employed, it’s wise to invert the phase on one of the channels. To create a sound that’s larger than life, try recording a part with close and distant mics and pan the two channels, then repeat the process, panning the channels in the opposite direction. Two close mics pointing at different parts of the speaker – one dead-centre and the other towards the far edge – will pick up the full range of the speaker’s tone.
Make sure the notes you do want to play actually come out well-audibly. Good technique and dynamics go a long way here. Listen to your playing and take care that important melodic notes really come out, whereas accompaniment is often better subdued. Palm mute is useful so you can give notes a distinct loud attack without causing an indistinct muddle of cross-ringing notes. Also, make sure you play well in time and with good intonation.
I’m also going to go out on a limb and suggest the earliest Univoxes also included the ‘Lectra, a version of the one-pickup Aria 1930 violin bass (made by Aria). These were basically violin-bodied basses originally inspired by the Gibson EB-0, and popularized among imports by Paul McCartney’s use of the Höfner violin bass, copied by EKO. This was a hollowbody with no f-holes, Cremona brown finish, single neck pickup, bolt-on neck with position dots along the top of the 22-fret bound rosewood fingerboard. Strings anchored to a covered bridge/tailpiece assembly.
A volume pedal is ideal for those guitarists out there who like to use volume swells or fade-ins, and those who don’t want to have to use the volume pot on their guitar to do so! All you do is apply pressure on the front or back of the pedal to get the desired effect and you’re good to go! They’re super simple to use and only change the signal rather than the tone of your guitar or bass.
{ "thumbImageID": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "defaultDisplayName": "Squier Affinity Mini Strat Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pink", "sku": "sku:site51500000053100", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink-1500000053100.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000053099", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red-1500000053099.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red/J86206000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053098", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black-1500000053098.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black/J86206000001000", "brandName": "Squier", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.

Follow your musical vision and express yourself with the unique Fender Newporter Player. The exclusive medium-sized Newporter shape gives it a balanced voice that's both articulate and powerful, perfect for backing up any singer. Designed for performing, the fully-painted gloss metallic solid spruce top, mahogany back and sides, matching painted 6-in-line headstock and creme binding give this guitar a shot of electrifying style. Unconventional to the core, the Newporter Player is definitely something different and exciting.
{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The Boss Katana Head is a full featured amplifier head that can handle stage, recording and practice duties. It does this with its built-in power attenuator, which lets you choose between 100W, 50W and a super quiet setting of 0.5W. To complement the 0.5W setting, Boss even added a built-in 5" speaker into the amp head - making the Katana head to be technically a combo amp in head form factor. Complementing its versatile power rating is its built in amp modeling, which gives you five voicings from acoustic, to clean to high-gain. As expected, this amp comes with essential effects from Boss, with over 50 of them to choose from, 15 of which can be loaded to the amp for quick use, albeit limited to just 3 effects running simultaneously. Finally, all these features are packed in sleek looking profile that feels really solid, as expected from Boss.
The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws.

Alonso de Mudarra's book Tres Libros de Música, published in Spain in 1546, contains the earliest known written pieces for a four-course guitarra. This four-course "guitar" was popular in France, Spain, and Italy. In France this instrument gained popularity among aristocrats. A considerable volume of music was published in Paris from the 1550s to the 1570s: Simon Gorlier's Le Troysième Livre... mis en tablature de Guiterne was published in 1551. In 1551 Adrian Le Roy also published his Premier Livre de Tablature de Guiterne, and in the same year he also published Briefve et facile instruction pour apprendre la tablature a bien accorder, conduire, et disposer la main sur la Guiterne. Robert Ballard, Grégoire Brayssing from Augsburg, and Guillaume Morlaye (c. 1510 – c. 1558) significantly contributed to its repertoire. Morlaye's Le Premier Livre de Chansons, Gaillardes, Pavannes, Bransles, Almandes, Fantasies – which has a four-course instrument illustrated on its title page – was published in partnership with Michel Fedenzat, and among other music, they published six books of tablature by lutenist Albert de Rippe (who was very likely Guillaume's teacher).

There is a historical parallel between musical styles (baroque, classical, romantic, flamenco, jazz) and the style of "sound aesthetic" of the musical instruments used, for example: Robert de Visée played a baroque guitar with a very different sound aesthetic from the guitars used by Mauro Giuliani and Luigi Legnani – they used 19th century guitars. These guitars in turn sound different from the Torres models used by Segovia that are suited for interpretations of romantic-modern works such as Moreno Torroba.
If there was any doubt left in the late 1950s that the guitar – not the saxophone – was rock & roll's essential lead instrument, Duane Eddy settled the argument: See his 1958 single "Rebel Rouser," curled with country twang and rippling with tremolo. "Chet Atkins used vibrato in a selective way – Duane Eddy used it to thrash the music," says the Kinks' Dave Davies. The impact of Eddy's hits, like "Forty Miles of Bad Road" and "Peter Gunn," would soon be heard in surf music and guitarists such as Jeff Beck and George Harrison.

It’s safe to say a wah-wah pedal will be your first stompbox if it’s not already. The wah is a sweepable fixed bandwidth filter that has a treadle you rock back and forth producing vowel-like inflections. The phrasing possibilities are only limited by the player. These days, you have an array of major as well as indie pedal builders who make incredible wah pedals such as Dunlop, Vox, Fulltone, Teese, Xotic, and Wilson Effects.
You should be aware of some drawbacks to using the 'free' sites over the licensed sites (or purchasing a book of official TAB). First, the versions of the songs at the free sites were created by folks who enjoy music and did their best to document how to play the song. It may not be correct. Second, even though these sites don't charge for access to the TAB, most are in the business of making money. You'll have to put up with advertisements, often including flashing banners and pop-up ads. Finally, the original artists do not get paid for these transcriptions. If you like what you find, you should follow-up by purchasing the official music from an licensed reseller.
The Gibson style guitars generally have shorter stubbier necks, with a 233/4 inch scale length, which suits some but not all. The Les Paul, the quintessential model, boasts twin humbucking pick-ups which effectively reduce noise and produce the thick, warm tone associated with Gibsons. It is difficult not to be impressed by the tradition of Les Paul guitars. No-one will ever convince me there is a better looking guitar style. For under $1000 the Epiphone Les Paul Standard will give you a little bit of the legend to take home and for many that's a good enough reason to buy one. Epiphones are cheaper factory made versions of the Gibson USA range. For those who learn on Gibson style guitars the Les Paul is what all guitars are measured against.  more...
Very large cabinets, such as 8x10" cabinets, may have both wheels and a long "towel bar"-style handle to facilitate moving the equipment. Some 8x10" cabinets have handles on the top and bottom to facilitate two-person carrying of the cab. Some combo amplifiers have wheels and a retractable carry handle, to enable bassists to walk while pulling their bass amp; this can enable bassists to walk onstage with their bass and amp or walk to a venue with their gear.
I don't remember if it was actually an LP special II, but the first guitar I bought with my my own money at about the age of 15 was an absolutely beautiful Epi Les Paul. Black, with a really nice quilt maple top. I fell in love with the way it looked. Well, it turned out that guitar sucked. I mean it really sucked. Bad intonation, bad tuners, bad pickups, bad bridge, everything.I saved up my money sacking groceries for like 6 months and I ended up spending that hard-earned money on a crap guitar. I put it on layaway and my dad would drive me up to the store once a month and every time he would try to talk my into other guitars, Fenders mostly (he is a musician also). Nope. I really liked the way the guitar looked. I was young and stupid.

Pedalboards are just plain fun. You can mix and match any number of little boxes and really personalize your tone. We are living in the golden age of guitar pedals right now with such a huge variety of effects out there. The majority of effects fit into one of the following categories: gain (overdrive, fuzz, distortion, compression, clean boosts), filter (wahs, auto-wahs, envelope followers), and time-based (delay, reverb, chorus, flange, phase). 

We have covered pickups here before so rather than running over old ground I suggest you read that article to get an understanding of the different types of pickups an electric guitar uses and how they work in greater detail. For the purpose of this article, however, all sound starts with your pickups. Pickups are essentially magnets, generally 6 small magnets wrapped in a very fine copper wire (over 7000 times), and can be better described as magnetic wire coils.

With that in mind, the quality of said effect is satisfactory, to say the least. You maybe won’t see the same level of refinement as you would in some stand-alone models, however its reverb comes across as fairly organic. On top of that, you are presented with several decent options. All of that aside, the real value of this Zoom comes from its ability to combine up to 6 effects at any given time.

The thoughtful design and close-tolerance machining of the mechanical components of most electric guitars enables them to be set-up and adjusted with great precision. But it is important to make these adjustments in the correct order- Neck-Nut-Bridge saddles. Making fine tune adjustment to any of these elements without reference to the others, or out of this order, will prevent a guitar's true potential from being realized.
ESP Guitars makes seven types, the Eclipse series, James Hetfield Truckster, and Kirk Hammett KH-3 from ESP, the LTD EC series and Truckster, the Edwards E-LP series, and the Navigator N-LP series, which are based on the Les Paul design. Certain EC models have 24-fret necks and active electronics using EMG pickups instead of the standard passive pickups and 22 frets found in the traditional Les Paul. The Edwards and Navigator lines are made in Japan, and available only on the Japanese market; they come standard with Gotoh hardware and Seymour Duncan pickups (EMG pickups in a few models), and unlike the EC and Eclipse series guitars, which are updated variants on the Les Paul, these are made to be as close to the Gibson 1959 Les Paul design as possible, in the vein of the late 1970s and 1980s “lawsuit” model guitars from Tokai, Burny, and Greco, complete with Gibson style headstocks.

An electric guitar with 6 strings, dark blue metallic in color without case. It is has its body made of rosewood and its neck from the maple. The fret boartd is made from rosewood and has dimension of about 106.7 x 52.6 x 12.4 cm. The guitar goes for about INR 13,990 depending on prevalent market factors. you can get more information by clicking on the following link:

The blues was my inspiration-specifically, the late-'40s solo recordings of John Lee Hooker. "Hobo Blues" is an excellent example of early Hooker on which his violent string slapping-clearly audible in a blend of amp sound, haunting vocals, and trademark foot stomping-creates an indelible realism and engaging intimacy. My recording of Paris Slim's "The Day I Met The Boogie Man" (see the sidebar "Selected Discography") was one of my early experiments with this technique. Since that time, I have used a discrete "air-guitar" mic whenever I have had an available track for it. Guitarists may initially be skeptical of such unusual miking, but it's always a treat to watch their faces light up as they listen to the monitors deliver the bright, transient sounds that they have been accustomed to hearing during their years of practicing their instruments.
THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
CALIFORNIA SPECIAL models mix no-compromise attitude with top-notch build quality and sound. Optimized bracing reduces mass for superior resonance, while the upgraded bone nut and saddle grant them exceptional sustain. Featuring all-solid construction, the fully-painted solid Sitka spruce top and matching 6-in-line headstock give the models a shot of electrifying attitude and unconventional Fender style that loves to be both seen and heard.

Excuse me for interrupting but I think that it's not properly to complain about who Clarence didn't added and who he didn't..if you search another site the top 10 will be different..i bet there are no sites who have exactly the same top 10 artists… I found this site because i just wanted to know names of great guitarists.Since you already know some you can create your personal Top 10 for yourself or for a blog or anything. I don't think it's right to influence others with your own opinion. I'm not really that expertised but I thought it would be nice to react. Thank you and no flames intended ^^

Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration. To produce this relatively "clean" sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional "Headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called "switching amplifiers."
The following effects are a step up from your basic overdrive, distortion and fuzz, with more specialized sounds. In this category, you’ll find pedals that include effects such as time delays or frequency modifications – things that go beyond changing the shape of a sound by also changing the pitch, rhythm or both. Others are simpler, but still offer enough tone-altering potential to set them apart from the basic pedals.
Now I do all of my own adjustments and I have no plans to change that unless I run into something that's beyond me. Even if that scenario occurs, I still plan to try to learn as much as I can so that hopefully I will be able to take care of any future issues that are related. Mark did a great job for me but I feel that I do a better job adjusting my instruments to my needs.
I always recommend spending a little more money in the beginning. If you start with a complete bottom of the line starter guitar, you are going to want to upgrade within a few months. So I recommend getting a more midrange priced guitar between $350-$800. It will be cheaper in the long run and if you decide playing guitar isn't for you, you will find it much easier to sell the nicer guitar.
I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar. I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best. You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment. You get treated like a valued customer. Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars. They have a great variety of quality instruments. Plus, they have some really cool, unique guitars. A place like this is so rare nowadays.
This guitar master started building guitars when he was 12 in the early '80s when Eddie Van Halen's Frankenstein guitar inspired him to create his own beautiful monstrosities. Since then, McCarthy worked at several music shops, doing repair work on the side, and learned from master luthiers working in their dungeons before finding a home at Dallas Repair Shop. Paul also does warranty work for Fender in its custom shop, which led to repairing Buddy Guy's guitar and Ted Nugent's. "Selling guitars at a guitar shop, you really have nothing to show for it," McCarthy says. "But here at the end of the day, I can see what I've done. Work with my hands, fix problems, and it pays pretty good, too."
No, could it be!? Finally we see a brand that does not come from England nor the US, but from Germany. ENGL specializes in tube amps for high-gain and heavy-metal. Its most famous users are Ritchie Blackmore and Steve Morse (Deep Purple), Alexi Laiho (Children of Bodom) and Chris Broderick (Megadeth). Both past and present Deep Purple members even have their own signature model. And there's also the standard Powerball, Fireball, Classic, and Invader series.
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
Because most “top 10 guitar posts” throw a bunch of guitars up there, tell you they’re “the best” and give you little information about them. That’s unhelpful on its best day and dangerously misleading on its worst. Because “best” and “top” are not concrete terms in this sense, unless you’re talking about sales figures, which they almost never are.
Gibson did not take Fender too seriously at first; Fender were just an amplifier company that made a few guitars. They didn't regard the solid-body Broadcaster launched in 1950 as a serious musical instrument, lacking the depth of tone of a Gibson electric-acoustic. But music was changing, guitarists wanted different sounds, and music was getting louder. Fenders instruments proved to be more appropriate for the emerging musical scenes. Over the next decade Fender created a number of solid-body guitars that defined genres. Guitars like the Stratocaster, Telecaster and Precision and Jazz basses proved to be exceptionally popular and have stayed in production ever since.
This workshop includes: lecture, demonstration and hands on experience in advanced guitar electronics.  Students will study alternate guitar wiring schemes demonstrated by instructor Scott Walker, and stereo wiring and Onboard Effects loop options will also be covered.  This class will focus on signal paths, diagrams, and component selection, in passive and active circuits.  Students will learn about basic preamp design.
Perfect working condition Amp is an absolute beast, if you know anything about these AC30s you'll know that there tone is unbelievable. Make me an offer or trade These amps sell for close to 18k and well above that on oversees markets The amp does have some cosmetic ware but obviously does not affect the sound what so ever Gibson, fender, guitar Watssapp me 0737886874 Amp is based in Durban ...

There sure are a lot of electric guitar options to choose from in this day and age. Thankfully, your choice doesn't have to be a difficult one to make thanks to world-leading guitar companies like Epiphone. In fact, Epiphone specializes in a wide range of electric guitar value packages, assembled specifically to help budding enthusiasts begin their musical journey on the right foot. If learning how to play the guitar is something you've always wanted to try but were never sure where to start, consider this section your launching pad.

That said, unless the beginner had a specific focus, I never have a problem recommending Line6 spider amps. Lots of options built right in (so you save a fortune on effects you may want to experiment with), and they don’t sound bad at all. I played one a few years back in a rock band and got compliments on my sound all the time, and I put nothing else in the signal path, I played straight in using one of their floor controllers at a gig. I think the whole setup (and this was the 120 watt one) cost me something like $350 bucks.

For 2017, they introduced (or re-introduced?) the Firebird Studio. The Studio has regular tuners with protruding keys, and it has regular humbuckers instead of minis. It is not a Firebird, it is a Les Paul with the body of a ‘bird. This lie of a guitar sells for a whopping $1300, and the real version of the guitar - which is identical in every last detail to the cheaper 2016 model I own - now retails for $1500!
The Kay Musical Instrument Company grew from the Groeschel Mandolin Company (or Groeshl Instrument Company[8]) in Chicago, established in 1890.[9] In 1921, the company was renamed to Stromberg-Voisinet. In 1923, later president Henry Kay "Hank" Kuhrmeyer joined the company, and in 1928, with the help of an investor,[9] he bought the company and started producing electric guitars and amplifiers.[10]
The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.
The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.
The Les Paul 100 by Epiphone is an entry level electronic guitar. The body is made of mahogany which is known for warm/balanced sound with a good sustain. The rosewood fretboard enhances the sounds and sustains. A C-shaped neck provides the beginner with incredible comfort. Finally, this guitar features two humbucker pickups for clean and great sound.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
It’s probably fair to say that drive pedals of all shapes and sizes outnumber the other types of effects. This is due to the fact that they form the backbone of your overall tone. It’s also probably fair to say that it’s one of the most subjective tonal changes you can implement. One man’s muff is another man’s screamer, so to speak. There are certain classics within the genre which may act as a gateway to stronger forms of grit though. Ibanez’ famous green Tubescreamer pedal is used by countless players on account of its versatility, whereby it can form the basis of a good quality blues tone. Or it can complement a distortion pedal by ‘boosting’ or tightening up the signal. Another favourite is the Electro Harmonix Big Muff, which has been used for decades by players looking to add a distinct fuzziness to their tone.
After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.

CAUTION: If you find that the truss rod is very difficult to turn, then stop now and take your guitar to the guitar shop. It may be that there is a problem with the neck or the truss rod and you may damage the guitar by forcing it. Believe me, you do not want to damage the truss rod. If, instead of tightening the truss rod, you need to loosen it, do so by turning it anti-clockwise (counter-clockwise). Again, a quarter turn at a time. Once you have got the gap to 0.012” (or whatever gap you prefer), you will have finished this step. Feel free to remove the capo at this stage if it is attached.  

As compared to the musical giants like Epiphone and Fender, Davison Guitars is just a family-owned, small-scale manufacturer. But the reason for the Davison Guitars Beginner Starter Package becoming an Amazon Bestseller, is the fact that it provides beginners with the opportunity to begin with a simple, decent-sounding and easy-to-manage full-scale electric guitar. You also needn’t scurry around for the necessary add-ons that are required. Neither do you need to decide and pick between a stylish Les Paul or Stratocaster. Starting off in full-scale certainly strengthens you as a learner. Now, not many electric guitar starter combos or bundles offer that kind of value; despite certain shortcomings, this product is here to stay. Not only can it fit your requirements, but it’s even ideal for gifting purposes!

ARM-SAITENLAGE Die Tremoloarm-Saitenlage kann eingestellt werden, indem 3,0 mm großer Inbusschlüssel an der Schraube (B) an der Tremoloschraube verwendet wird. FEIN-TUNING Auch nach dem Verriegeln der Verriegelungsmutter können Sie die Fein-Tuner verwenden, um Feinabstimmungen zur Stimmung jeder Saite vorzunehmen. Sie müssen alle Fein-Tuner (C) auf Mittenposition des Einstellbereichs stellen, bevor Sie die Verriegelungsmutter festziehen.
The tip of a soldering iron is very hot, around 700F, and can damage the board, component packages, and wire insulation in a fraction of a second, not to mention your own skin, so be careful the tip does not touch anything as you move it in and out of the soldering area. Put the pencil back in its holder when not soldering. Don’t leave a hot iron laying on a bench or table.
For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.
The only reason why anyone likes Ibanez is because it's cheap. When you're ready to buy a real axe, get a Jackson. Ibanez is not a "shredder" brand, it is a budget brand, just like Carvin. Jackson has it all: great sound, great feel, great looks, great for shredding! I'll admit because Rich makes some interesting looking guitars, but Jacksons are still cooler (if you've ever seen a Kelly, I'm sure you'll agree). Jackson For the Win!

To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
I lost a wonderful EMPRO les paul custom model In a plain top brown finish (it was at a friends house in Dallas Texas who died in 2002 and was auctioned off before I could get down there from Michigan). It was my first electric guitar, bought at a pawn shop in Sulphur Springs, TX in 1989. I loved that guitar and have only seen about three other Empros since then. I did not see the Empro badge on this site. Anybody know the maker?
While the general purpose is to emulate classic "warm-tube" sounds, distortion pedals such as the ones in this list can be distinguished from overdrive pedals in that the intent is to provide players with instant access to the sound of a high-gain Marshall amplifier such as the JCM800 pushed past the point of tonal breakup and into the range of tonal distortion known to electric guitarists as "saturated gain." Although most distortion devices use solid-state circuitry, some "tube distortion" pedals are designed with preamplifier vacuum tubes. In some cases, tube distortion pedals use power tubes or a preamp tube used as a power tube driving a built-in "dummy load." Distortion pedals designed specifically for bass guitar are also available. Some distortion pedals include:

While Gibson are the creators of the original J2000 jumbo-sized acoustics, the company’s reasonably priced sister company Epiphone do a range of acoustics which are perfect for players looking to dip their toes in the water. The Epiphone EJ2000 is identical in dimensions and appearance to its more costly sibling, yet offers the perfect entry guitar for budding rhythm players.
With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.
Yes, a Martin guitar under $500. The Martin LX1E features a sitka spruce top with mahogany back and sides. It carries the Martin name, which  means high quality is expected. Being that it is closer to out $500 limit, you can expect this guitar to deliver on tone. This one is a direct competitor to the Baby Taylor. People that own both have said that they like the sound of the Martin better, describing it as bright and crisp. The tradeoff is the playability is not rated as high as the Taylor. See more pictures and reviews of the guitar here.
Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
Processing audio before it passes through an amp simulator is a creative alternative to adding effects to its output. As described elsewhere in this article, pitch-shifting can work well in conjunction with amp simulation, but other ways of editing and processing the raw guitar file before it goes through the amp modeller also yield interesting results. Reverse reverb, resonation, vocoding and Auto-Tune can all produce distinctive effects. Try chopping small sections of guitar out, for an interesting stuttering effect that's nothing like tremolo. A piece of guitar that's been reversed before being fed through an amp modeller sounds quite different to what you get by reversing a guitar part that's already been through an amp, and this technique can be very effective. Likewise, recording three or four separate tracks of single guitar notes and routing them simultaneously through the same guitar amp simulator sounds very different from playing chords. Sam Inglis
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.
For electric guitar amplifiers, there is often[vague] a distinction between "practice" or "recording studio" guitar amps, with output power ratings of less than one watt to 20 watts, and "performance" or "stage" amps of 30 watts or higher.[citation needed] Traditionally,[according to whom?] these have been fixed-power amplifiers,[jargon] with some models having a half-power switch to slightly reduce the listening volume while preserving power-tube distortion.

Enough with the American brands, haven’t the rest of the world got something to offer? Well, Japan has come up with a few! Ibanez for example offer amazing guitars, and when they first started out the original idea was actually to offer good copies of American electric guitars! Today they have moved on to doing their own thing, and produce excellent guitars.
Its very obvious very few on this list have never picked up a guitar in their life as this looks like a what brand does my favorite band play list... Considering Gibson these days are garbage and only were good for a few style to begin with no way they're number one... Fender has very solid build quality, but to diversify them to play numerous styles takes heavy modification. As far as electric are concerned there is a number that can top the list, as schecter, esp and Jackson are too low on the list and I've heard good things about rickenbacker. Ibanez is also excellent. Its really a toss up for me...I haven't played much esp do I phased them out...I have extensive time with Ibanez schecter and Jackson... Ibanez is gone because the build quality is no better and the playability is pretty much the same as a Jackson but the Jackson gives you far more bang for the buck... As for schecter and Jackson they put out some fully loaded guitars that are only going to rock you maybe a weeks ...more
As his Tuareg brethren continue their separatist insurgency in northern Mali, the leader of Tinariwen again can lay claim to being one of the world’s few literal rebel rockers. Ibrahim gets credit for inventing the modern Tuareg electric guitar style adopted by Etran Finatawa, Bombino, and other Saharan musicians. He generates this gritty, grungy, churning sound by hammering open strings on his Fender axe in a laid-back desert boogie reminiscent of his late northern Mali peer Ali Farka Touré.
Eric Clapton: select alder body with a special soft V-shaped maple neck/fretboard, 22 vintage-style frets, three Vintage Noiseless pickups, 25dB active mid-boost circuit and a “blocked” original vintage synchronized tremolo. Available in olympic white, pewter, candy green, torino red (Artist Series), Antigua burst, gold leaf, EC grey, daphne blue, graffiti canvas, mercedes blue, black and midnight blue (Custom Artist), as well in olympic white, torino red and pewter with a “Thinskin” nitrocellulose lacquer finish (Custom Thinskin Nitro).
Many people will say that Overdrive and Distortion pedals are basically the same thing: wrong! While the overdrive tends to add gain and texture to your clean tone, emulating a cranked amplifier, the distortion intentionally clips and distorts the waveform of the guitar signal. The effect of distortion pedal is much more audible and the resulting sound is harsher and louder, and sometimes completely different from the starting sound. Distortion pedals are perfect for rock and metal players, and represents a safe boat for guitarists that may feel the need to have a backup to their tube amplifier: a distortion pedal into the clean channel of a rented amplifier can save your gig! The ProCo Rat 2 is an instant classic, while the Electro Harmonix Metal Muff/Top Boost gives you some serious distortion with a top boost in single box. And for your über-metal needs, the Harley Benton Extreme Metal is here to help.
If your volume and tone knobs start to make crackling or popping noises through your speaker whenever you’re plugged in, or if the signal is weak, inconsistent, or cuts out altogether in certain positions on your controls, some foreign matter (however minute) has probably lodged itself in your controls. Dust and rust pose the greatest potential threat to any electronic connection.

What guitar you get will heavily depend on what style you want to play. If you like death metal you probably don't want to buy a pink Telecaster... think about what you like and what you are going to play! But maybe you want to make a statement and be the guy playing a pointy metal guitar at a jazz jam? The guitar should reflect your personality to some degree at least!

.From its G logo cattle brand on top, to the fence rail pickguard graphic, the Chet Atkins Gretsch cowboy'd up big time with cactus, cattle, rifle and arrow inlays inscribed right into the mother of pearl. This 6120W  Reissue combines many of the most desirable features of this longtime favorite. Twin Filter-Tron pickups offer lively, hum-free performance, with master volume and tone controls for ease of operation. See pics,pricing and info here
A full step down from standard. Used by bands such as Korn, Paradise Lost, Dream Theater (on "False Awakening Suite" and "Illumination Theory" from the self-titled album), Emmure, Obscura, ReVamp, and Fear Factory (on most songs from Obsolete and Digimortal, "Drones" and "Bonescraper" from Archetype, "Moment of Impact" from Transgression, and most songs on Mechanize, The Industrialist and Genexus)

If the LR Baggs Venue is a little too expensive for your taste, the Acoustimax Sonic Maximizer preamp from BBE gives you a lot of the same controls at less than half the price. Like the Venue, the Acoustimax is ideally designed for the gigging or studio acoustic guitar player who wants to have more control over their tone and be able to adjust for different rooms and environments. BBE delivers this control with a five-band EQ, as well as feedback and frequency dials.
To learn how to practice correctly, you can sign up for a FREE No B.S. Guitar membership below. I’ve created this free course to teach you everything you need to know on how to practice correctly (Pit-Stop Practicing). I go much more in depth on the “how to learn” side of things, and you’ll avoid making all the same mistakes I made when I got started.
Other Archtone owners may notice a slightly different model number, but with the exception of a tenor version, the only difference is the finish. The H1213 (your model) was finished with a shaded-brown sunburst, the H1214 was ivory-colored with a flame effect, and the H1215 was a sunburst with a grained effect. In excellent condition, this model is worth between $200 and $250 today. But in the average condition yours appears to be, it’s worth between $100 and $150.
Once you've mastered a few songs on the guitar, you may want to record what you can do so others can hear you shred a wicked solo. Or you may want to use your recording to help improve your skills. In either case, recording your electric guitar outside of a studio can result in poor sound quality that is less than desirable or noise complaints. Depending on your situation and equipment, there are many factors you'll likely have to tweak on your way to getting the best recording, but with a little effort, you'll soon be able to listen to an awesome recording of your musical ability.
I had gotten rid of all my effects pedals a long time ago because I wasn't using them. So when I saw this little processor and the price I thought I would give it a Try. I was amazed at all the sounds and tones this thing puts out. For the little money you spent it is deff. worth it. I have not yet messed around with the drum settings but I will. This will be loads of fun to play around with. A deff. 5 star rating.
Death By Audio Reverberation Machine Spring type Reverb/synthetic atmosphere creator with Altitude control that allows the reverb to distort. Also has a light/dark switch to control color of the reverb. Pedal was used in a smoke free studio, never gigged and has no velco on bottom. Pedal has small speckled blemishes in paint next to volume knob. This has no effect on function. Pedal is in perfect working order. This is a great pedal for people who want to add more texture to their sound. Ive used it on synths, drum machines and samples- handles any source without discretion. The only reason for letting it go is that i have too many spring type reverbs. Thanks for looking .
Guitar Neck wood Fingerboard Blanks Electric guitar wood Burl Poplar 1pc Walnut Spalted Apple Burl poplar Spalted Maple Olive Spalted Walnut Burl Elm African Mahogany body wood Red Willow 1pc body blanks Plum Red Willow 2pc body blanks Spalted Birch Pear Mulberry Maple Acoustic / Classic guitar wood Flute and Oud blanks Pool Cue wood blanks & Wood Turning Gallery Sold examples Custom Wood Products Binding wood NEW! Gun Stock Blanks

Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.

Jump up ^ The Guitar (From The Renaissance To The Present Day) by Harvey Turnbull (Third Impression 1978) - Publisher: Batsford (ISBN 0-7134-3251-9) - p112 (Chapter 3 - The Twentieth Century) - "In Spain Falla's lead was followed by Joaquin Turina (1882–1949) and Federico Moreno Torroba (b. 1891), who began to produce works in collaboration with Segovia."
Several years later, Gibson issued its third Jimmy Page Signature guitar, this one based closely on Jimmy Page’s #2. Issued in a production run of 325 guitars, the guitar more accurately reproduced Page’s heavily modified No. 2 than the original Signature model of the 1990s, and featured the 4 push-pull pots, the two mini-switches under the pick guard, accurate tuners and sound-accurate pickups (the same pickups that were used in the 2005 Jimmy Page No. 1 Signature), as well as an accurate neck profile. As in the original Signature model of the 1990s, pulling up the neck or bridge volume pots switched the respective pickups’ coils from series to parallel, and pulling up the tone pots switched the respective pickups from humbucking to single coil. The two push-button DPDT switches mounted beneath the pickguard provide universal switching functions, regardless of the positions of the push-pull pots. With the switch mounted toward the bridge-end of the pickguard in the out position, the bridge pickup’s phase is reversed. With the switch mounted toward the neck-end of the pickguard in the out position, both pickups are wired in series and out of phase. With both switches out, both pickups are in series and in phase. The Jimmy Page “Number Two” Les Paul is finished with a sunburst finish to replicate the appearance of the original guitar. 325 of these guitars were made, with the initial 25 being autographed by Jimmy Page and priced at US$25,000 when new.
Festive music track with cheerful and happy mood, with “We Wish You A Merry Christmas” song melody. I’ve included in pack different logo and looped versions of this track, for your comfortable using. This celebratory track can be used for Winter Holyday projects, children arcade games, as New Year jingles, advertising and Youtube commercial video. Enjoy!
Maybe it's time for you to start to think about what is comfortable for you to play. 10-46 is probably the most standard size used by players. Although, I'd put money on the fact that your Mockingbird came with 9s. Mine did, and they were the first things to go (very fast, but too floppy). While there is some merit to staying with 9-42 for familiarity's sake, making the move to a 10-46 set should be pretty easy to do while you're still learning.
In this example I used the "Sub Engineer Bass" patch included in the Kontakt 5 bass collection. But there are no rules in this regard: a simple sine oscillator can do the trick just fine. Back in the '60s and '70s it was not unusual to use a Rhodes to achieve the same effect, and Roland's famous JUNO-106 was also used on countless occasions with the same goal in the '80s. Just give it a go with whatever you have at hand!

We noticed in our last article, 10 best Acoustic Guitars Under $500, some readers mentioned the Luna series of guitars. Thank you all for pointing these out! What a truly beautiful line of acoustic and electrics. The Luna Ash, an acoustic electric hybrid is a sleek, responsive guitar ready for any setting: playing live, recording, or jamming with friends. With a mahogany body and rosewood fretboard, this visually stunning guitar is just one in the line of Luna guitars that provides ridiculous eye candy and amazing sound quality and playability. The Ash goes for around $499, and that’s a steal! 

The United States Department of Justice found emails from 2008 and 2009 in which Gibson employees discussed the "gray market" nature of the ebony wood available from a German wood dealer—who obtained it from a supplier in Madagascar—as well as plans to obtain the wood. It filed a civil proceeding in June 2011,[40][43][44] the first such case under the amended Lacey Act, which requires importing companies to purchase legally harvested wood and follow the environmental laws of the producing countries regardless of corruption or lack of enforcement.[44] Gibson argued in a statement the following day that authorities were "bullying Gibson without filing charges" and denied any wrongdoing.[39][45] Arguing against the federal regulations and claiming that the move threatened jobs, Republicans and Tea Party members spoke out against the raids and supported Juszkiewicz.[46]

“Stoner rock” has to be the most useless classification in the long history of futile attempts to describe what music sounds like. (What rock isn’t stoner rock, amirite?) Despite the misleadingly mellow connotation, the term is really just shorthand for Josh Homme’s thick-necked guitar playing, first in Kyuss, but more famously in Queens of the Stone Age, blending ’70s-vintage proto-metal sludge with high-desert lawlessness, Black Sabbath playing Jesse Pinkman’s house party. Tall, ginger, and wielding a sense of humor as dry as his Mojave stomping grounds, Homme doesn’t exactly look the part of an alt-metal godhead, which only makes the poison easier to swallow.
SPEAKER-LANEY-LA30Stock Code: 558568Guitar Amp Items Available: 1Stock ID: 558568Available at Cash Converters Pinetown only. Subject to availability.Please visit the store to view and purchase the product.Cellphone number 083 459 1248 (Whatsapp) Telephone number 031 701 9017 - speak to JennyBuy with confidence -This product is covered by the Cash Converters guarantee.Faulty goods returned within 6 ...
So there you have five good beginner’s guitars. Bear in mind that while the quality of these instruments is good—it’s a fiercely competitive area—they’re at the bottom of the market. You get what you pay for (as they say). At the same time, “cheap” guitars like these have come a long way in the last ten years and they’re excellent for starting out, before deciding to mortgage your house on that expensive vintage Fender or Les Paul Gibson mentioned earlier.
Replace or upgrade your guitars pickup selector and other switches with the highest quality switches available from Switchcraft, CRL, Fender, Oak Grigsby Gotoh, Philmore and other top brands. Lever/blade style switches, toggle switches, mini switches, rotary switches, slide switches and other styles. For pickup selector and mini switch technical data, visit our Pickup Selector & Mini Switch Connections page to view drawings with the internal switch connections of each switch position. And if you are upgrading or replacing your pickup selector switch with a different type or style, check out the Pickup Switch Terminal Cross Reference page to view the corresponding terminals of the most common pickup selectors and switches.

Back in the mid-60s, a desire for independence in business led to John Skewes forming a small musical instrument agency and wholesale business based at his home near Leeds, England. Over time, his new business steadily began to take off, and soon included throughput of some self-branded lines of musical merchandise. That effective early decision to carry self-branded merchandise continues to this day, with their signature Vintage® acoustic and electric guitars and basses which were first produced and sold in 1985. Today, Skewes is the largest family-owned independent musical merchandise distributor in the U.K. and the Vintage ‘family’ includes Fret King® electric guitars, Pilgrim® Banjo’s and Mandolins, Laka® Ukuleles, Encore® electric and acoustic guitars, and Kinsman® cases.

There are two basic types of pickups for electric guitars, Single Coil and Humbucking (double coil). The most practical difference is that single coils tend to sound crisp and bright while humbuckers tend to sound warmer (for more information see Seymour Duncan's detailed explanation). An electric guitar can have any combination of the two types and the combination on a guitar is described using the first letter of the pickup type in order from the one closest to the bridge. For example a classic stratocaster will be described as SSS meaning all three pickups are single coil. A more recent development is the HSS strat which means it has a Humbucker at the bridge with two Single coils. I've put the pickup configuration of each guitar below in brackets after the model name so you can easily see which pickups each guitar has and in what positing they are.

A rackmount effects unit may contain an electronic circuit nearly identical to a stompbox-based effect, but it is mounted in a standard 19" equipment rack, which is usually mounted in a road case that is designed to protect the equipment during transport. More recently, as signal-processing technology continuously becomes more feature-dense, rack-mount effects units frequently contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.