After music fans heard his impressive blues rock playing on John Mayall’s ‘Beano’ album, they began to spray paint “Clapton is God” on London, England infrastructure. It’s safe to say that Clapton left quite an impression on people. His playing with Cream, Derek and the Dominos, and Blind Faith as well as in his solo work only helped to strengthen Clapton’s legend.

Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
Neck-through guitars feature a (usually laminated) neck that, unsurprisingly, extends through the entire length of the body, with ‘wings’ or ‘fins’ glued onto the sides of the body. This gives even more stability to the neck and even more sustain and resonance when played. Neck repairs are, again more difficult and costly. However, the increase in stability means these repairs are much less likely to be needed.
I have a beautiful 2003 Ltd and my friend who has played for many years has the Taylor and he ended up borrowing my tak for five months he didn't want to give it back you know the guy has played with some well known folk's so I trust his judgment played with Keith Green and America and I have played over thirty years so I haven't let to many go by without some trial and ownership this tak is as good or better than the best Martin can offer. Ovation can't touch it and of course Gibson is too soft for me I own a fender and a Yamaha 6 and 12 for the money you can't beat a yam and I have played hummingbird to dove guild gretch Washburn breedlove which is a favorite not many I haven't played so with all this my top ten is Takemine Martin Gibson Breedlove Hagstrom Taylor Guild Gretch Washburn and Yamaha. If you can find a Hag it will blow your bag I have a 1971 Hagstrom acoustic I believe it was a demo for Golden Earing it was a gift from an old friend from Deutschland any way I will say ...more
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."

The first step in deciphering the serial number is determining the country or facility in which the guitar was produced. In most cases the country of origin is provided in the same location as the serial number. In cases where you have a serial numbe r but not a country of origin, the origin can sometimes be deduced from the serial number, although in this case it's very helpful if you have at least a rough idea of the date of manufacture.
We are really proud of our instruments, but what makes us most unique is our people, and your access to them. The world is full of faceless guitar companies, most are big conglomerates. We have a team of passionate guitar people and are committed to giving you unprecedented access to our team. Each member of the team is focused on supporting you. We treat each player like a Michael Kelly endorser. We value personal relationships with Michael Kelly owners and work hard to give you a level of service not readily available from other guitar brands or retailers. Let us help you get the right instrument!

This fuzz sounds great! Different from a standard fuzzface or tonebender sound, and much more musical in my opinion. Not buzzy at all, very smooth. It is not one of those over-the-top fuzz sounds. It's more of a fuzzy overdrive. But really the amount and quality of the fuzz is highly dependent on the transistors. Q1 seems to effect the amount of output, and Q2 changes the character of the fuzz. I tried many combinations and ended up using 2N2222's for both (BC109's also sounded great!). One other ... full review

Jazz – Does no-one listen to Eddie Lang’s recordings? Or that master of comping, Freddie Green? To Charlie Christian? MarleyIII gets special credit as the only one naming the marvellous Jim Hall, who really should be up there in one of those ten spots. Like Marley, I really like the work of John Abercrombie, although I can’t put hand on heart and suggest him for the top ten. If you like John A, let me put in a plug for the work of London session-man John Parricelli. (Which reminds me that the very different “Johnny A” is no slouch either!)
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
While the decision to choose between bridges can be an overwhelming one, to simplify things, it’s better to choose one that’s appropriate for your skill level and your personal taste in music.  One bridge for the heavy metal genre may be absolutely frustrating for a country player.  For those with numerous guitars, you might have a different bridge on each instrument to suit that situation or style of music.
Even now i make people custom guitars and have made a few for people in MO/IL a total of 23 made and they all love them and say they are the best guitars theyve played cause i work side by side to shape the guitars necks and bodys to fit most comfortably with them but i charge $2500-3000 for a guitar which is still cheaper than the big name guitar places
A Chorus effect can help you achieve lush, warm, and rich tones that work well during busier parts of a song. The effect attempts to simulate the sound of multiple performers playing the same part of a song at once. It works similarly to a flanger effect, where a sound is duplicated and slightly delayed. Choruses often use a longer delay than a flanger, and the delay time is also modulated with an oscillator to simulate the natural variations in time and pitch that will occur between several different performers.

If, like me, you're a complete and utter sucker for watching musicians strip their songs down to the barest essentials and perform them with minimal accompaniment, then you're going to lose your mind over the stripped down, guitar version of "Wildest Dreams" that Taylor Swift has just dropped from her acoustic session at the Grammy Museum Sessions last year. Performing the hopelessly dreamy song with just her voice and her electric guitar, the performance is jaw droppingly good and the song honestly sounds even better than it does on the studio track from 1989.

The following open-tunings use a minor third, and give a minor chord with open strings. To avoid the relatively cumbersome designation "open D minor", "open C minor", such tunings are sometimes called "cross-note tunings". The term also expresses the fact that, compared to Major chord open tunings, by fretting the lowered string at the first fret, it is possible to produce a major chord very easily.[14]


Double-coil or "humbucker" pickups were invented as a way to reduce or counter the unwanted ambient hum sounds (known as 60-cycle hum). Humbuckers have two coils of opposite magnetic and electric polarity to produce a differential signal. Electromagnetic noise that hits both coils equally tries to drive the pickup signal toward positive on one coil and toward negative on the other, which cancels out the noise. The two coils are wired in phase, so their signal adds together. This high combined inductance of the two coils leads to the richer, "fatter" tone associated with humbucking pickups.
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.
Better known simply as an acoustic guitar, the “steel” strings (they come in all kinds of construction, not just steel) are louder and brighter, and a much more versatile instrument to play. Folk, rock, jazz — acoustic guitars have it all covered. Those steel strings also chew the ends off your fingers until eventually you develop hard calluses on the tips — very handy for plucking boiled eggs out of the saucepan.
On the other hand, if you do decide to stick with it, having a good guitar means you won't have to worry about upgrading in the foreseeable future when your skill levels rise above the problems associated with cheap options.  Realistically, no matter who you are or are buying for, you shouldn't get the cheapest option.  At least go middle-tier unless we're talking about a 5 or 6 year old's first guitar.

Originally started as a replacement parts shop in Japan, ESP Guitars – which stands for Electric Sound Products – got their guitar manufacturing business off to a rocky start here in the United States. They were taken to court by Gibson guitars for producing instruments that too closely resembled the American brand’s guitars. But, they settled out of court in 1978 and ESP’s reputation eventually grew, thanks in part to George Lynch, the guitarist for the 80s metal band Dokken, and his signature axe pictured here – The Kamikaze Model 1. Now, ESP guitars are wildly popular amongst metal and hard rock clientele and you can hear their instruments on the records of some of the brand’s loyal artists – including the likes of James Hetfield and Kirk Hammett of Metallica, Page Hamilton of Helmet, and the guys in Children of Bodom.
The MS-50G lets you use up to six of effects simultaneously, from its large pool of digitally modeled effects (47) and amps (8). And all of the settings and parameters are adjusted via its intuitive interface, albeit with just a single footswitch. You can save each preset you create or edit, just store them into the pedal's 50 memory banks. This flexibility gives you an unprecedented tone options. Other noteworthy features include its built-in chromatic tuner and its versatile power options, which include 2 x AA batteries or via a USB power source.
In this guitar lesson you’re going to learn 7 of the most basic guitar chords for beginners. These beginning guitar chords are the first ones every guitar player should learn. They are sometimes referred to as open position chords, because they are played in the first few frets of the guitar and all contain at least one open string. If you are looking for easy guitar chords for beginners, these are the ones to start with.

Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.
Twelve-string electric guitars feature six pairs of strings, usually with each pair tuned to the same note. The extra E, A, D, and G strings add a note one octave above, and the extra B and E strings are in unison. The pairs of strings are played together as one, so the technique and tuning are the same as a conventional guitar, but they create a much fuller tone, with the additional strings adding a natural chorus effect. They are used almost solely to play harmony and rhythm parts, rather than for guitar solos. They are relatively common in folk rock music. Lead Belly is the folk artist most identified with the twelve-string guitar, usually acoustic with a pickup.
By the way, I’d like to also take this opportunity to thank collector and one of VG’s earliest subscribers Jim Dulfer for invaluable help in an ongoing research effort, providing access to his truly impressive paper collection and photographs of some of his instruments. These catalogs are filling in many, many holes in information. You will be reaping the benefits in upcoming “Different Strummer” columns in both information and illustrations, as well as in upcoming book project. Thanks to Jim from guitar fans everywhere!
You should be aware of some drawbacks to using the 'free' sites over the licensed sites (or purchasing a book of official TAB). First, the versions of the songs at the free sites were created by folks who enjoy music and did their best to document how to play the song. It may not be correct. Second, even though these sites don't charge for access to the TAB, most are in the business of making money. You'll have to put up with advertisements, often including flashing banners and pop-up ads. Finally, the original artists do not get paid for these transcriptions. If you like what you find, you should follow-up by purchasing the official music from an licensed reseller.
This guitar is of the finest, and yet it is only fraction of the cost that you would normally pay. You may be wondering how such an amazing product could be so cheap, it is possible because it has been manufactured in China, where labor is cheap. Cheap labor does not mean that has been compromised; all parts are of the highest. We have our own factory that recreates them. Our version of Custom Shop Guitars is 95% same as the original in terms of quality and design, the parts are made and imported from China, Japan and Korea in order to manufacture the best musical instruments. When purchasing this guitar you can only stand to win. If you are satisfied, you have just saved yourself hundreds of dollars! So go on, treat yourself to the guitar you have always wanted. We use the best pickups; best tuning keys and other hardware. All of our guitars are custom made guitars. The Top Guitars specializes the world’s finest custom guitars, major guitar brands, boutique brands and collectible guitars. Owning the latest state of the art equipment, craftsmanship and skilled technicians. Our products are exported to Southeast Asia, North America and Europe. Our 100% satisfaction guarantee allows you to buy with confidence!
The guitar offers a beginner some great features in sound and playability. For starters, it is technically a Les Paul (giving you a great “cool factor,” which is important when you’re first starting out). It cuts a couple corners that a Standard or Special Les Paul won’t, like the fact that it’s a bolt-on neck, and there are proprietary single coil pickups (as opposed to the standard humbuckers you’ll usually find in a Les Paul).
We’ve talked about four electric guitars by now. Let us talk about the “Mini” Strat from Squier by Fender. It is a “mini” guitar because it is has a small Strat and therefore, it is literally the best choice electric guitar if you want to buy one for your child. But that does not mean adults cannot use it. If you are a beginner who just wants to practice then this is a great model for practicing your skills.
This page contains information, pictures, videos, user generated reviews, automatically generated review and videos about Washburn XM DLX2 but we do not warrant the quality, accuracy or completeness of any information on our web site. If you have more information about Washburn XM DLX2 please write a review. Some reviews are automatically generated generated by using verbal representation of publicly available numeric rating information musicians entered while writing review of Washburn XM DLX2. User generated reviews of Washburn XM DLX2 represent opinions of credited authors alone, and do not represent Chorder's opinion.
A diagram showing the wiring of a Gibson Les Paul electric guitar. Shown are the humbucker pickups with individual tone and volume controls (T and V, respectively), 3-way pickup selector switch, tone capacitors that form a passive low-pass filter, the output jack and connections between those components. The top right shows a modification that allows both pickups to have their volumes adjusted independently when the selector switch is in the middle position: the two bottom connections are simply swapped on each volume potentiometer.
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
In 2003,[73] Gibson debuted its Ethernet-based[74] audio protocol, MaGIC, which it developed in partnership with 3COM, Advanced Micro Devices, and Xilinx.[73] Replacing traditional analog hook-ups with a digital connection that would, "...satisfy the unique requirements of live audio performances," may have been the goal of this project.[74] This system may require a special pickup,[73] but cabling is provided by a standard Cat-5 ethernet cable.[73][74]
Fast forward to 2018 and ESP is still going strong, with a huge range of speedy guitars tailored for heavy rock and metal, including several 7- and 8-string models. ESP offers a range of popular models in the budget market (under its LTD subsidiary) as well as high-end guitars, played by some of the biggest names in heavy metal – Kirk Hammett, James Hetfield and Stephen Carpenter to name a few.
The road toward becoming a better guitarist is paved in… books? It certainly can be, although there are plenty of routes that both beginners and professionals take to improve upon — and bone up on — their craft. The books on this list are about history and technique. They’re books that you’ll pull off the shelf for years to come to look up a vintage guitar you’re curious about or a chord progression or song you’ve been meaning to master. You may find additional inspiration reading the autobiographies of your favorite guitarists, but we decided to leave those off this particular list. If you’re in the market for a good guitar book, read on.
Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Goldburst, Redburst

Measure the height of the strings at the twelfth fret. For most playing styles, the height between the bottom of the low "E" string and the top of the twelfth fret should be a hair over 2/32". The High "E" string should be set at 2/32". The other strings should gradually flow between these measurements. This is where I would start, but the player's style (particularly their right-hand attack), as well as string gauge, scale length and individual neck nuances may necessitate deviation from these numbers.
Phrase sampler: Like a loop pedal, a phrase sampler will store loops or phrases of even greater length. The more expensive and sophisticated phrase samplers will save multiple phrases or loops, drum and bass, rhythm guitar, or practice solos. Some have USB connectivity and can hook up to your computer for uploading, so you never lose a loop or phrase.
To build an electric guitar, start by cutting out the guitar body from a piece of wood like maple or swamp ash. Then, bolt a pre-made neck onto the body and attach the bridge. Next, install the pick-ups, volume control, and guitar cord. Finish by putting your strings on the guitar and testing out your instrument. If you want to make the process easier, you could try purchasing an electric guitar kit.
I've had a Sunburst pattern Ventura when I was a teenager.. it was a nice guitar and played well. recently i saw a really well made Oscar Schmidt gs-1 . not expensive at all. My main guitar for many years was a Gibson howard roberts "artist" dove style. wine red and mother of pearl inlay and gold plated. I eventually sold it to a lady in alaska that plays a lot of blue grass and pop. I got full money out of it. I had it 25 years, so it was vintage by now.
The ultimate rock/metal electric guitar instrument is here! Shreddage II covers the entire range of lead AND rhythm playing – every fret, every string, and tons of articulations. A powerful interface allows for easy playing and deep customization. With the included Kontakt Player and ReValver HPse, you’ll have everything you need to SHRED. Now includes Shreddage 2X update!

One of the first successful methods was to record a track as you would any other. Then you would take the recording and play it through a speaker that is placed in a very large room. The magic happens when you put a microphone somewhere in that room to essentially record the sound of a recording. However, by placing that speaker in a large room, they have added a layer of natural reverb.
For the younger children in the 4-8-year-old range, a scale length of about 22.7 inches is a good fit. Although some electrics come in scale lengths down to 22.2 inches, the extra length will keep your child from outgrowing the guitar too soon. For comparison, adult full-size guitars such as the Fender Stratocaster have a scale length of 25.75 inches while Gibson Guitars are an inch shorter. So if you are confused that what to buy for your new learner or the little one, you can go with the product that fits perfectly in your requirements.
Get ready to rock! This kid's electric guitar set has everything little rockstars need to jam out in style and foster a growing passion for music. Whether a child is just learning the basics or has mastered every chord, this guitar is the perfect practice tool to lift them to the next level. Hook it up to the included 5-watt amplifier and let your kid experience music like never before!
The Les Paul body style actually encompasses a few different designs: solid, solid-arched, and solid-chambered. Solid Les Pauls are made from a solid piece of wood, with some having a significantly arched top and a maple cap and some lacking a curved top and the maple cap. Chambered Les Pauls are arched, but the inside of the body is chambered, so there are a few cavities underneath the top.
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
A good guitar builder can pick materials that provide a predictable result. The process of making a  guitar that costs $10,000 and one that costs $1,000 is identical, or at least very similar. The big difference is likely that in the more expensive one, personal attention has been put into selecting, drying, storing, and cutting the tonewood. The cheaper, which is mass produced by less skilled labor, consists of the same species of wood, but from a pile that came out of a container, in the order it was stacked. This means that two guitars from the same batch can sound quite different. They can sound exactly like the expensive guitar, but they can also sound different.

Inspiring, light, and upbeat corporate background music with motivational and optimistic energy. Positive and sunny tune for technology and business presentations, travel inspirational Youtube videos, success stories, unforgettable journey, slideshow, TV, radio. Featuring muted electric guitar, piano, synth pads, acoustic guitar, drums, bass guitar, piano.
A standard Squier Stratocaster is mass-produced in factories located in Indonesia or China. For its construction, Squier usually uses woods readily available in those countries, such asagathis and basswood. They also use stamped metal hardware and multiple pieces of wood in construction to reduce waste and to lower costs. In some cases, the body is laminated, much like a plywood, rather than consisting of two or three solid pieces glued together.
Well... I'm researching this to since I have a Norma Accoustic. From what I have found they were only made between 1965-1970something. Most were made in japan including mine although some were made in Italy. They were made in the same factory as the Sear silvertone's. Most are considered vintage guitars especially the electrics from the 60's. From what I have seen electrics in good condition are worth a good bit of money. I'm still trying to find more info on mine though. Like what woods is it made of. and what was the exact year of manufacture. It says FG-10 on it. It plays great. Has great sound and plays prety easily except mine doesn't seem to like you using the first fret. lol... just trying to add some info here
Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
While they may be on the dry side, these books are convenient because they’re always available for reference. In an online class or an app, you might have to go digging through files or lessons to find that one scrap of information that was helpful. You also have to be on your phone or at your computer. For some people, the old way is still the best way.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!

This budget price range is home to compact, low-powered combo amps, which are mainly designed for beginners and home practice. Despite their low volume and limited features, you can find some exceptional sounds and versatility that will make practice sessions good fun. This category can throw up some poorly made cheap amps, so stick to bigger brand names, such as the Blackstar ID:Core 10 V2, which is a great example of what a $100 guitar amp should offer, including low power, decent tone, good EQ and a variety of amp voices. While you may outgrow one of these affordable amps after a year or so, they are a great way to begin.
Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.
If you like to run all your effects into an amp set clean and get your gain sounds from pedals, you probably don’t ever need to consider using amplifier effects loops or a wet/dry/wet rig. If your amp(s) are set relatively clean, you will be able to use any of the effects listed above straight into the front of the amp—and they should sound really good.
The Omen line is made for everyone, but perhaps leans just slightly toward the shredding crowd. This guitar features a maple bolt-on neck which features a rosewood fretboard with pearloid inlays. The inlays are a nice touch at this price, if you’re into that sort of thing. The pickups are Schecter Diamond Plus humbuckers and offer a well-balanced tone that can also be aggressive when needed. Twenty-four jumbo frets means this is good for speed.

Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.

I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
Welcome to KayBassGuitar.com.  We're a the online Kay Vintage Reissue web site of Rock N Roll Vintage Inc., a Chicago based internationally known vintage guitar dealer.  Kay currently offers the "Street Series" and a "USA Recording Studio" lines.  Kay plans to offer reissues of 12 popular models including the Barney Kessel and the Jazz guitar and bass lines.   The Street Series are authentic reproductions of Classic Kay guitars and basses.   The Recording studio series will offer models with exceptional hand built custom shop quality.  We offer the complete line of Kay Vintage Reissue Basses and Guitars.   These Kay reissue guitars and basses look amazing and play even better.  Currently the Kay K161V Thin Twin and K775V Jazz II guitars and K162V Pro and K5970V Jazz Special basses are available.
Aside from the stereo effect of doubling up the same part and panning it to opposite ends of the stereo spectrum, some guitarists use stereo rigs in conjunction with stereo effects. Traditionally, this involves using two amp cabinets, although single cabs that operate in stereo are available. To achieve a good, even stereo image, it’s best to mic each cab identically, ideally with the same type of mic. Invert the polarity of one of the channels to avoid any out-of-phase issues, and pan them hard left and right. Stereo effects such as reverb, delay and room ambience, can be added to mono guitar signals at the mixing stage.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!
The Blue Midnight was released in 2011 with a limit to the key of C, also on the less expensive side of the market. It features stainless steel cover plates with a wider back gap for enhanced volume while playing. The unique feature of this harp is the comb, which is made out of translucent blue plastic. The comb allows for brighter tone than the black combed models. It also has a special just intonation (JI) "Chicago tuning". It is also now available in other keys.[23]
The chorus effect sounds like a lush underwater soundscape that is created by doubling your guitar signal and slightly shifting the second one out of time and pitch with the original.  This effect can be very subtle, which sounds as if you’re playing out of two different amps separated in space, or highly modulated to sound as if two different players are playing the same part at the same time.
MusicMan is the story of two former Fender employees who decided to create their own company in 1971. In the beginning it was called Tri-Sonix, before they changed the name to MusicMan in 1974. While the first product of the brand was a tube/solid-state hybrid amp ─ the Sixty Five, developed with the help of a certain Leo Fender ─ the company became famous for its guitars and basses. The introduction of the mythical StingRay guitars and basses in 1976 is a milestone in the company's history. The guitar is an average seller (rock players find it too "clean"), but the bass and its active Tom Walker preamp that allows to boost certain frequencies is a huge success. After severe conflicts within the team, MusicMan was sold to Ernie Ball in 1984. The brand then started to endorse famous artists like Albert Lee, Steve Lukather (Toto), John Petrucci (Dream Theater), and Eddie Van Halen (Axis), and developed signature models for every one of them.
Distortion was not an effect originally intended by amplifier manufacturers, but could often easily be achieved by "overdriving" the power supply in early tube amplifiers. In the 1950s, guitarists began deliberately increasing gain beyond its intended levels to achieve "warm" distorted sounds.[29] Among the first musicians to experiment with distortion were Willie Johnson of Howlin' Wolf,[29] Goree Carter,[30] Joe Hill Louis,[31][32] Ike Turner,[33] Guitar Slim,[34] and Chuck Berry.[35]
Joe is a musician, engineer, and producer in NYC. Over the years, as a small studio operator and freelance engineer, he's made recordings of all types from music & album production to v/o & post. He's also taught all aspects of recording and music technology at several NY audio schools, and has been writing articles for Recording magaz... Read More

Intonation is difficult since the bridge is a bar of metal with grooves cut into the top. The whammy bar works and provides a nice warble in a limited range. Action is a bit high at the moment, and adjustment is limited to bridge height unless I shim the neck (no truss-rod adjustment is obvious). Still, the short scale and light strings make it easy to play anyway.


Starfield was a guitar brand owned by Hoshino Gakki. In the 1970s, Hoshino Gakki and Kanda Shokai shared some guitar designs and so some Ibanez and Greco guitars have the same features. The Kanda Shokai Greco guitars were sold in Japan and the Hoshino Gakki Ibanez guitars were sold outside of Japan. From 1982, Ibanez guitars have also been sold in Japan as well as being sold outside of Japan [3].
As you know, like most guitars sporting more than a single pickup, your Strat lets you select any pickup by itself or choose certain dual-pickup combinations. The standard way to connect multiple pickups is to wire them in parallel. This generates the classic tone our ears know from countless records, when a guitarist uses the bridge and middle or middle and neck pickups in tandem (positions 2 and 4 on a normal 5-way Strat switch).
{ "thumbImageID": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "defaultDisplayName": "Yamaha Billy Sheehan Signature Attitude 3 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51308847077862", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black-1308847077862.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black/H75903000001000", "brandName": "Yamaha", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black/H75903000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Blue", "sku": "sku:site51308847077871", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue-1308847077871.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000-00-60x60.jpg", "imgAlt": "" } ] }
The fact that the output is electrical has made possible a dizzying array of sounds produced by electrically and electronically modifying this electrical output. Besides the volume and tone controls on the guitar and on the amplifier, a variety of outboard devices are used to obtain custom sounds and effects. As an attempt to organize these effects, consider the following classifications:
The Acoustic Resonance control gives you the option of adding life back in to your sound. Where some pickups, Piezos in particular can sometimes sound “quacky” and hard, due to the fact they only pick up the sound of the bridge area, the AD-10 analyses your pickup signal and recreates the missing body and string resonances accurately to ensure the subtle tonalities of your playing qualities of your guitar are intact.
Scott Walker began tinkering with electronics at an early age. In his early teens he began playing guitar and experimenting with pickups. In the Spring of 2001 he attended the Roberto-Venn School of Luthiery.  Following graduation he accepted a job with luthier Richard Hoover, of Santa Cruz Guitar Company. At Santa Cruz Guitar Company his specialty became hand-carving necks, and he also began to take on other responsibilities, including the position of shop foreman. At this time he began developing an electric guitar for the ‘21st century.’ After meeting musician Barry Sless, he began to develop an instrument that had the broadest tonal range available. After five years of R&D he began offering his guitars to the public. During his pursuit to develop an electronic package to incorporate into these instruments, he began working with electronic wizards Peter Miller and John Cutler. This collaboration resulted in the current design now found on all ‘Walker Guitars.’  For more information please visit:  www.scottwalkerguitars.com
Effects pedals, or stompboxes, are effects units designed to sit on the floor or a pedal board and be turned on and off with the user's feet. Typically, effects pedals house a single effect. The simplest stompbox pedals have a single footswitch, one to three potentiometers (knobs) for controlling the effect, gain or tone, and a single LED display to indicate whether the effect is on or not. More complex stompbox pedals have multiple footswitches, numerous knobs, additional switches and an alphanumeric display screen that indicates the status of which effect is activated. An effects chain, or signal chain, may be formed by connecting two or more effects pedals together.
The Ibanez Artcore AS53 is a semi hollow-body guitar created for guitar players from diverse genres as blues, country, rock and jazz. The guitar feels nice and has a compact and comfortable body. The tone is rich, warm and full. If you are looking for that fat hollow body sound, this guitar makes it possible to switch from jazz to every semi-hollow rocking style of music. A combination of quality and affordability.

The Fender Mustang I V2 Guitar Amplifier Combo also features USB connectivity allowing you to hook it up to your computer or DAW software for easy recording. If you don’t already have a DAW, you can utilise the free downloads of Fender FUSE and Ableton Live software suites to create your own music and take advantage of all the great features within the amplifier when recording. An intuitive, easy to use control panel allows you to see and change your sounds and footswitch connectivity (sold separately) ensures you can have complete control without the need for a pedalboard. A fantastic amplifier for beginners and players of all levels.
Intraday Data provided by SIX Financial Information and subject to terms of use. Historical and current end-of-day data provided by SIX Financial Information. All quotes are in local exchange time. Real-time last sale data for U.S. stock quotes reflect trades reported through Nasdaq only. Intraday data delayed at least 15 minutes or per exchange requirements.
{ "thumbImageID": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard/K35713000002001", "defaultDisplayName": "Gibson Les Paul Faded 2018 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry Black Pickguard", "sku": "sku:site51500000137380", "price": "989.00", "regularPrice": "989.00", "msrpPrice": "1,649.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard-1500000137380.gc", "skuImageId": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard/K35713000002001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Faded-2018-Electric-Guitar-Worn-Cherry-Black-Pickguard/K35713000002001-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Bourbon Black Pickguard", "sku": "sku:site51500000137381", "price": "989.00", "regularPrice": "989.00", "msrpPrice": "1,649.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Faded-2018-Electric-Guitar-Worn-Bourbon-Black-Pickguard-1500000137381.gc", "skuImageId": "Les-Paul-Faded-2018-Electric-Guitar-Worn-Bourbon-Black-Pickguard/K35713000001001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Faded-2018-Electric-Guitar-Worn-Bourbon-Black-Pickguard/K35713000001001-00-60x60.jpg", "imgAlt": "" } ] }
One half step down from Drop D. Utilized by bands like Dir En Grey, Our Lady Peace, Your Demise, Oceana, Alter Bridge, Alice in Chains on some songs (like "Them Bones" or "We Die Young"), A Day to Remember (on the song "It's Complicated"), Chevelle (on Sci-Fi Crimes), Of Mice & Men, Deftones (on their Around the Fur album), Evanescence, Paramore, Disturbed, Theory of a Deadman, Puddle of Mudd, Linkin Park, Sevendust, Skillet, Black Veil Brides, Steel Panther (on songs like "17 Girls in a Row" or "Gloryhole"), 10 Years, Black Stone Cherry, Truckfighters, Fireball Ministry, RED on End of Silence, Nirvana on In Utero, "Blew" live performances, "Been a Son", the Nevermind album and also by System of a Down. Also used by Lamb of God somewhat on their albums Wrath and VII: Sturm und Drang, and almost exclusively on their album Resolution. Avenged Sevenfold used this tuning on songs "Scream", "Almost Easy", "Hail to the King", "Requiem" and "Coming Home". Guns N' Roses used this tuning on "Shackler's Revenge" from Chinese Democracy. Metallica use this tuning on their song "Minus Human" off S&M, on Dirty Window from their album St. Anger and live performances of songs recorded in Drop D, Asking Alexandria on their first album (Stand Up And Scream), As I Lay Dying have used this tuning on a few songs. Trivium used this tuning on their albums In Waves and Vengeance Falls. Van Halen on their 1981 song "Unchained". The Presidents of the United States of America use guitars tuned to this tuning with the top three strings removed, although on Freaked Out and Small, regularly strung guitars were used. Tyler Bryant & the Shakedown use this tuning on some songs (like "Heartland" and "Aftershock")
Uh, Roland. I don’t know when was the last time I read about the best amplifiers and one of Roland’s models was not there. That’s not due to their ability to market their instruments to everyone (well, they are good at that too, probably) BUT the main reason why they are always a talk of the town (of a very musical and amplifier obsessed town) is their quality of production. With a lot of expensive amps, they are also graceful enough to give us the MERE MORTALS ability to bath in the glory of what is Roland tone. This CUBE‌-10GX amp is a 10-watt little combo amp with one 8 inch speaker that is ideal for home practice or anyone who needs an inexpensive model that will not ruin their performance. With built-in effects, heavy-duty cabinet design, and a compact construction the CUBE‌-10GX amp might be your best choice for a practice amp that also works as a traveling amp.
A hillock appeared again, but at 350Hz. This is really into the human voice range now. The curve is no longer a curve, but a flat line, and the -10dB point shifted at 800Hz. the guitar will sound dark, moody, the kind of muted tone they use in clean guitar stereotypical rhytmic jazz chords. On the oscilloscope, we will barely see the small fringes of the higher order magnitude signals, and a more sine-like wave.

It's the perfect guitar ... for someone else!  So your buddy just gave you his 7-string death avenger before heading off to college cuz he knew you wanted to learn to play.  Nice, but what he did NOT know is that you hope to be the next string-bending Tele-twangin' Brad Paisley.  It ain't EVER gonna happen with you wielding the death-star, sell her to a metal head and getcha that Tele!

Try different gauge strings. As you know, guitarists can be creatures of habit. But heavier strings can help both your tone and fingering strength, while lighter strings may suit bigger bends. Experiment! Billy F Gibbons has the thickest tone but his top E is only a .007. Stevie Ray Vaughan’s top E was a .013. Changing string gauge may just bring out your best inner-self.
The single keys at the beginning of the keyboard (C2-C3 white notes only) contain a variety of percussion instruments (2 wood blocks, an Irish bongo, a mini rain stick, a mini swinging drum, a tambourine, a mini hollow wood log and a mini wooden scraper). Then the black keys further up are groups of instruments that cut each other off. For instance the first group of black notes (F#3,G#3,A#3) are all samples from the big conga but with different hit types. The next 2 black notes are a dear skin bongo. The next 3 black notes are the little conga. The next 2 black notes are a little metal bongo. The next 3 black notes are the medium conga and the next 2 black notes are a home made plastic shaker. This makes it easy to know the grouped instruments. It is also easy to whack a way at the congas (like real congas) as they are all the black keys in groups of 3 and each conga cuts its own keys off if another is played. I mainly recorded this for the 3 congas and then added the other bits as I had them laying around (some are even from my childrens musical instruments bag, i.e. wood blocks from the early learning centre and a home made plastic shaker). The congas are boomy when played hard but with a lot more delicate hand sound when played softly. It is possible to get a variety of sounds and styles with these conga samples.
Open the case and you will find over 689MB of rich guitar tones ranging from 70 to 130BPM. These sensational loops are neatly arranged into 3 categories comprising of 50+ Ballad Hooks, 50+ Steady Riffs and 50+ Upbeat Jams, all applicable to a vast range of genres! From the clean, delay-drenched chime of Ballad Hook 'Serene' to the upbeat overdrive of Steady Riff 'Perpetual' and the crunchy swagger of Upbeat Jam 'Loose', STUDIO GUITARS redefines quality guitar samples and delivers them in stunning 24-bit high definition.
Rather than being period-correct reincarnations, Fender's Original series aims for a ‘best of decade’ vibe. So, this Strat is alder bodied with a ‘round-laminate’ rosewood fingerboard that was implemented in mid-1962. In a mid-'60s style we get Pure Vintage ’65 Gray-Bottom single coils on an 11-screw mint-green pickguard with aged white controls. Meanwhile, a concession to modernism is the second, lowest, tone control, which originally would have been for the middle pickup, but here works on both the middle and bridge pickups. Another 'modern' inclusion is the ubiquitous five-way lever switch, which didn’t actually replace the original three-way switch on the Stratocaster until 1977. We defy anyone who opens a case and sees one of these beauts not to have an ‘OMG’ moment. The guitar that launched thousands of dreams back in the day still impresses 64 years on. You’ll find these ‘fixes’ on many Fender Custom Shop models, of course, but while these don’t come with any ageing or relic’ing they are significantly cheaper. Yet, viewed from a 2018 perspective, it gives Fender’s USA models a rare unity, a vintage nod to the escalating modernism
 of the Professional and ultra-tweaked and posher Elites. If you hanker after a new USA-made production Fender and want the most vintage-spec possible, this is now it. Vintage-inspired, yes, but with the fixes that many players will embrace.
OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.
Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.
The headstock does not come pre-carved, which is good for those who want to personalize its shape, and bad for those who can't do wood work. All needed parts are included, along with hex wrenches for the truss rod and saddle adjustment, it even comes with some solder, so you'll just need a soldering iron and a Philips head screwdriver to complete the assembly.
Small amps can benefit from being placed on a stand, rather than the floor, as reflections from the floor can muddy the sound. A stool or something similar will do if a stand isn’t available. For the same reason, when using larger stacks or combos with several speakers, try mic’ing one that’s furthest from the floor. Placing an amp against a wall will increase the bottom-end response, and placing it in a corner will emphasise the low end further still. A mellow tone can be achieved by pointing the amp into the corner and mic’ing from behind.
Chorus pedals can provide a nice subtle doubling effect to the guitar or an extreme “watery” effect when maximized. Famous tunes that use chorus is “Come As You Are” (1991) by Nirvana, and “Brass in Pocket” (1979) by The Pretenders. But basically almost any clean guitar sound in the 80’s had some chorus on it! Certain effects are timeless such as overdrive, reverb and delay. Other effects like chorus can evoke certain time periods such as the 80’s so that is something to keep in mind when using an effect.
I like most of the the 814's I've played though they seem just a bit brighter than some other guitars along that range. I prefer Collins guitars they're kind of in between the Martin sound, and the Taylor's brighter sound. After recording with several different ones. My favorites productions are Collin's OM1A , and more affordable Blueridge, and Recording king. I prefer Rosewood back and sides, Adirondack top, mahogany neck, with ebony fingerboard. Although mahogany back and sides with Sitka/ Engelmann tops sound nice too. When recording I think (might just be me) that I get better note separation from the Collins
Anytime you hear a screaming or raunchy sounding harmonic by way of loads of gain come jumping out of your speakers, it’s likely a result of pinch harmonics. Pinch harmonics follow the same basic idea of harmonics, except this time the contact is made with the skin of your pick hand thumb right after picking a note. Where you do this determines the pitch of the harmonic.

The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
Starting in January 1999, Taylor guitars are made with a patented bolt-on neck; the NT neck (new technology). It differs from other necks by using a continuous piece of wood all the way to the 19th fret to support the fretboard.[7] The standard practice is to support the fretboard up to the fourteenth fret with the unsupported portion being glued to the constantly moving soundboard. The NT neck fits into a pocket on the top of the guitar body with the desired angle being achieved by small, accurately milled neck spacers (shims). Over time, some guitars require the neck angle to be realigned (referred to as a neck reset). This process is greatly simplified by allowing the replacement of different sized neck spacers to return the neck to the required angle. Prior to 1999, Taylor Guitars had a simpler bolt-on neck. These guitar necks allow for simple adjustment later if needed. Traditional (Non-Taylor) guitars with a glued neck with a dovetail would need to be disassembled to be adjusted.[8][9]
1960's Harmony H-54 Rocket 2 Redburst- Here's a excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. We repaired a slight crack at input jack common area. Yes, someone years ago stepped on the cord. We professional glued it from the inside and it's stronger than new. All that shows is a slight line about 1 1/2" long on bottom edge. Anyway, the Rocket 2 is getting harder and harder to find. Two DeArmond Gold Foil Pickups power this baby. It's all original, except for the pick guard, which no one can detect. Condition other than slight repair is a 9 3/4 for this great 50 year old beauty. Guitar comes with period clip board case. SOLD
A list that's bound to be disagreed with, and I do. Although I love Hendrix, Clapton, etc. I'm still most impressed with Mississippi Fred McDowell. Bass line, rhythm, lead slide, and singing simultaneously and effortlessly. Several video performance on DVD are available, in case you listen to just an audio recording and wondered "who are the other guitarists playing, they're really good together?" nope, just Fred.

Then there's the obvious fact that wood has no magnetic properties, so it's simply impossible that any acoustic vibrations from the body will have any effect on the amplified sound. It's also not true that any acoustic qualities of the body wood are somehow imparted back to the vibrating string; the vibrations go out into the air and, well, that's it. They're a by-product, nothing more.
Washburn started in Chicago in 1883. They manufactured guitars and various other string instruments. Now they’re a division of the US Music Corp and owned by JAM Industries USA, but they continue to produce quality guitars. In the beginning, they mostly focused on banjos and mandolins. Starting in the 80s, they branched off into producing signature guitars. Now days they make a wide variety of instruments and are very beginner friendly. Washburns are made from fine-quality wood. This means they can get pricey. But the quality the solid wood offers is well worth the price increases. They’re a decent american company that make very consistent instruments. 
Are you a seasoned player looking to upgrade you instrument or a beginner starting to learn the ropes and tricks of playing a guitar? Well, in this article we have prepared a comprehensive guide on how to select the best electric guitar as per you needs and the list of the best electric guitars available in India. The guitar is a complex musical instrument with some basic components, a wide range of features and different constructions, so it is important to have some basic idea about these features so that you can make an informed choice.
If the microphonic problem is not due to the cover, or is with a singlecoil pickup you have two options. First is to wax pot the pickup. The second is to pot the pickup in something else. Laquer was once commonly used, but it can cause a problem with some types of insulation (disolving it) and prevents future repair (other than full rewind). I have found a great alternative to both. It is vinyl sanding sealer. (I'm using Sherwin williams wood classics interior sanding sealer) This stuff penetrates deeply, dries solidly, and allows for repairs same as wax does. It requires no special equipment or care. Just submerge the pickup wait till bubbles stop appearing, pull it out and set it on a paper towel to dry. Once the excess has run off (a minute or so) wipe off the top and bottom of the pickup with a rag and allow it to finish drying. In it's intended use it dries fully in an hour. I leave them overnight.
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.
Alvarez has always been an under-rated brand. Beautiful workmanship, great sound- an excellent value for the money. I have one of the old six string "dove" guitars and a Yairi 12 string: both are close to forty years old and both still sound and look great and have never needed any repairs. I also have an old Martin six string. I have done the "blindfold" test with friends to choose the best sound between the alvarez and the martin - alvarez wins every time.
Small-diaphragm condenser mics, on the other hand, tend to have flatter frequency plots and a better-behaved off-axis response, giving a sound sometimes described as more focused, but they seem to be less commonly chosen by the interviewees than large-diaphragm ones. Neumann's KM84 seems to be the most regular choice of small-diaphragm condenser, and numbers John Fry and Bill Price amongst its high-profile users, while Sennheiser's MKH40 warrants a particular mention from Mike Hedges: "I started using [these mics] when I was working with the Beautiful South. I started off with two and now have more than 20. I think they were originally designed for classical recording, because they have very high gain and very low noise. This means that you can get a very clean sound. They also accept massive amounts of volume, so you can put one against a guitar amp on full and it will take it." Hedge's concern about the ability of the microphone to handle the sheer volume of some guitar amps is echoed by several of the other producers, who make a point of mentioning that they switch in a condenser's 10dB pad when recording electric guitars.

The Les Paul Custom then became known as the “tuxedo” Les Paul with its Ebony and Alpine White color finishes, accentuated with shiny gold hardware. The Custom PRO features a classic gold LockTone Tune-O-Matic bridge and a gold stopbar tailpiece. You’ll find more gold in the headstock with the gold Grover tuners. It also features a fully bound body, headstock and neck, as well as pearloid fretboard inlays.
I always respond to these enquiries as I have played some in UK shops and like them a lot .Well designed and made though I am sure the odd duffer gets through like most imports .Trev Wilkinson did the designing ,though it should really read ,modifying ,as most are other makers basic designs,.The Les Paul lemon drop is superb judging by reviews and I loved their S types ..Worth the money it seems .I would prefer a Vintage Strat , 335 or Les Paul to the other cloned alternatives .I did buy an Epiphone Dot but after playing a Vintage 335 ,wish I had bought it instead .The ones I played were Chinese
The Top Guitars specialized only in Custom Made Electric Guitars and Basses - "We will create an instrument that will delight you with exceptional tone and great playability, optimized to your personal preferences and all with the utmost quality, beauty, and rigorous attention to detail. We are experienced builders of custom electric guitar and bass bodies and necks. We craft our exquisite custom electric guitar and bass bodies and necks using a variety of time tested, great sounding woods, offering options that you can not buy off the shelf. We can also build for anyone that has a custom design that they would like built to their specifications. We do our best to meet your dreams continually striving for unattainable perfection.Only the best, one-of-a-kind, and built just for you! "

Though the guitar is played through an amplifier which is often miked and recorded, the engineer or producer may later decide to use a different amplifier tone that's better suited to the character and timbre of the song, while preserving all the nuance and inflection of the original performance embedded in the direct track. The re-amp device allows the dry track to be sent to an amplifier again and properly miked and re-recorded for use as the final track.


As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.

What about Derek Trucks? Mark Knopfler? Trey Anastacio? Chuck Berry? Even Eddie Van Halen deserves some credit–more than John Mayer does for guitar playing. John Mayer's fame as a guitarist piggybacks on his commercial success, which is a result of targeting a demographic of 13 year old girls. He's no doubt a skilled guitar player, but over-rated as a guitarist relative to guys like Van Halen, Knopfler, etc.
The Effect: Loop pedals essentially operate as recorders that have the ability to infinitely spin the recorded bits and possibly alternate them in a variety of ways. The main function of any looper is to be able to record a musical part, and then automatically put it on loop until ordered not to do so anymore. Depending on the complexity of the pedal, loopers can offer multiple layers, overdubs, as well as options of recording more than a single instrument. They range from simple single-switch stompboxes all the way to powerhouse loop workstations. Check out our full reviews to see which one is your perfect match. If you are looking for the quick winner, the Boss RC 3 is a great contender.
• Sound Judgment: Consider the sonic characteristics of the various materials used in making electric strings. Stainless steel strings are the least glamorous, but offer plenty of bright bite and sustain. Pure nickel has a warm old-school sound, for vintage tones. And nickel-plated steel is a bit brighter than classic nickel and responds more adroitly to picking attack. Chrome guitar strings are typically the province of jazz players or blues artists who are looking for the kind of warm retro tones chiseled into history by the likes of Charlie Christian or swinging Gibson ES-250, ES-5 and ES-335 bluesman Aaron “T-Bone” Walker. And then there are coated strings – the most expensive and theoretically the longest lasting. They are, however, not really the best, sonically speaking. Coated strings tend to have less sustain. Also, their Teflon exterior surfaces are slippery, which might take some getting used to for particularly aggressive electric guitar players. And when the coatings wear off, they rust like any other string.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Wood: Maple & Walnut - Fingerboard: Maple - Frets: Jumbo - Inlay: Black - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line, Reverse - Bridge: Lo-Pro Edge - Hardware: 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: DiMarzio - Pickup Configuration: H-S-H - String Instrument Finish: White
Potentiometers are used in all types of electronic products so it is a good idea to look for potentiometers specifically designed to be used in electric guitars. If you do a lot of volume swells, you will want to make sure the rotational torque of the shaft feels good to you and most pots designed specifically for guitar will have taken this into account. When you start looking for guitar specific pots, you will also find specialty pots like push-pull pots, no-load pots and blend pots which are all great for getting creative and customizing your guitar once you understand how basic electric guitar circuits work.
Loose frets are especially problematic in certain old guitars, but are generally very easy to fix. You'll be amazed at the difference you can make with just a few tools, a bit of knowledge, and a little time. Fixing loose frets can eliminate fret buzz, remove sharp fret ends, and greatly improve the tone of any guitar. If your luthier bill will be greater than the value of your guitar, definitely time to have a go yourself!
First off I need to mention that there is a category of effects I will call “overdrive” effects where descriptive labels often overlap so it can be confusing. They are essentially effects that simulate amplifier tubes being overdriven to create distortion. These type of effects are can be called: distortion or overdrive or fuzz or metal. And the label is usually based on the amount of gain they produce. 
You’ll notice that once it reaches zero sound gets very muddy very fast. That’s because we have zero resistance between the signal and the cap. To prevent this, some people put a small resistor (10K or so) between the pot and the cap. That way we won’t affect pot operation at higher settings (510K is very close to 500K) but at lower settings it will prevent it from reaching zero as we’re always adding 10K in series.
Nice-Keys-Extreme-2.0  Still a big SoundFont set at 1gb or 1000mb (645mb dedicated to 3 pianos with 6 velocity layers). Similar to the top set but the main piano is a little less detailed so it leaves room for an extra piano (Steinways).  PC users should not have any problems or if running on iOS this set runs perfectly well on iPhone 6s or iPad Air 2. It is still possible to load this set within the bs-16i app and run Sweet Midi Player app using GM set one at the same time for midi backing if required. This set has everything described below plus the addition of guitars.

Flawless build, the action is set up so well I don't see any need to tinker with anything. Pulled it out of the box, tuned it and strummed a few chords, then set it aside for 24 hours. Re-tuned it the next day and it has stayed in tune. I cannot find anything amiss or out of place on this one. Per the serial number, this is a 2015 Indonesian build. The wood is simply perfect in appearance and the tone is outstanding for a thinline. Yeah, I am happy with this one. Recommended.


When two sine waves with frequencies A and B are ring-modulated, the output will also contain the frequencies A+B and B-A. If frequency B is not a multiple of A, these additional frequencies are inharmonic; e.g. ring-modulating sine waves at 1000Hz and 1250Hz will add the frequency 2250Hz, which is neither a multiple of 1000Hz, nor of 1250Hz. When more complex sounds are ring-modulated, sums and differences of all the harmonic frequencies are added.
that is not quite the reality since most are made in mexico or japan as they are of lower quality. You only meet those type of criterion when you buy a high handmade guitar which will be at least 1200 us or 1600 canadian. As you meet the entry level of solid wood prices better overall quality. It doesn't matter who makes the guitar : martin taylor, gibson, maton, collings, santa cruz, or even a high end a high high luthier like Olson, traugott or Ryan. The sound of the instrument and the perception that we have while we stroke a chord will define if we like the sound. We see how it feels, we look at a price that we feel comfortable with. Otherwise anyone would land a lowden, huss and dalton, bourgeois and the marquis version of Martin hd-28vs for instance. The personality of your style will infuence a lot of more then who makes it, because you buy the final product not the people who makes it.
Have you ever looked at a hollow or semi-hollow guitar on the wall at your local music store and wondered how the heck they get the electronics in there? The short answer: it’s do-able, but not easy. In fact, it’s widely considered to be one of the most difficult jobs in the wide world of guitar maintenance. My tech charges extra for doing electronics work in a hollow-body, and he’s definitely not the only one.
The actual key that this song was written in is Bb (B flat) and can be a bit difficult for beginners; I prefer using a capo for this song and playing it in the Key of C. Using the capo to play this song doesn’t change how the song sounds, but it makes playing the song a lot easier. Using your capo on the third fret, you chord progression will look like C – G – Am (A minor) – F.
Why Martin electric guitars have never been more popular isn’t too hard to figure out. Martin, whose expertise has always been in top-notch acoustics, never really put a lot of effort into marketing its electrics. They were always well made, and, especially in the necks, clearly “Martins.” In the final analysis, however, it probably comes down to being victims of the success of their acoustic brothers, and players have just never seemed to warm up to the idea of Martin “electric” guitars. For the savvy collector with a taste for quality and relative rarity, Martin electrics remain excellent and attainable prizes.

Unlike Christian, however, Montgomery used his thumb instead of a pick to create the percussive-yet-warm tone associated with his style. (According to interviews, Wes learned to play with his thumb because it created a softer sound, appeasing his neighbors.) With his phenomenal ear, Wes quickly grew beyond his influences and developed a style all his own. His knack for melody, groundbreaking use of octaves in a soloing context and intricate chord solos—as demonstrated in his devastating interpretations of standards like “Round Midnight” and “Days of Wine and Roses”—broadened the range of guitar, pushing the instrument into unchartered territory.
Nice-4-Bass-V1.5 This is an sf2 simplified version of three different basses - all with 4 velocity layers.  It includes the 1958 Otto Rubner double bass played and mapped by Drogomir Smolken, recorded by Ludwik Zamenhof. The samples are exceptional and some percussive effects have been mapped to some high notes. Royalty-free for all commercial and non-commercial use. Copyright 2016 Karoryfer Lecolds (Karoryfer Samples). The original Meatbass sfz version for Sforzando has round-robin sampling and includes arco as well as pizzicato presets.  (http://www.karoryfer.com/karoryfer-samples).
He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
When B.B. King heard T-Bone Walker, he "thought Jesus Himself had returned to Earth playing electric guitar." Walker invented the guitar solo as we know it, building a new style on fluid phrasing, bluesy bends and vibrato. It was the clear tone and melodic invention of his 1942 single "Mean Old World" that blew everyone's mind, and Walker refined his approach through hits like "Call It Stormy Monday." "I came into this world a little too soon," Walker said. "I'd say that I was about 30 years before my time."
Ok, whoever downvoted me needs to explain their reasoning, since I clearly laid out my reasoning. The person said they're interested in punk/rock/experimental, and there's no possible way you can tell me that a multi-fx pedal is better than a Big Muff and/or a DD3 delay. I will laugh in your face and point if you suggest such a thing. You could get both pedals for the price of any multi effect pedal, they hold their value, and they sound great. If you don't like a Muff, whatever, swap it out for a Rat. – Dan Gayle Aug 1 '14 at 17:39
I had a single-minded desire for single-ended tone, but I didn’t want to drop insane moolah on a tweed Champ (or any of the tweed Champ clones out there, or even a tweed Champ kit), cool as they may be. Heck, even a Silverface Champ is going to set you back in the $300+ range these days. And it’s a Fender. Dependable? Yup. Great sounding? Sure. But no one is going to see it and say, “What the hell is that?” Which is part of the fun for those of us involved in the weirdoes and freakazoids of the gear world.
The gray area between different types of phasers and chorus pedals—and phaser-style chorus pedals versus delay-based chorus pedals—arises probably because designers and manufacturers really have followed two distinct paths in this field. Some phasers have sought to approximate the Uni-Vibe’s approximation of a Leslie cab, and some so-called choruses have done much the same. Other phasers have been designed from the ground up more purely from the perspective of the principles of phase shifting in itself, rather than in an effort to sound like a whirling speaker or any other electromechanical device that has come before. The result means the field is broad and varied, and different phasers (or their related effects) can often have different voices with characteristics more distinct than, say, two delays from different makers.

This full-size electric guitar from Davidson is all that you need to start playing master the very art of strumming. The quality, durability, comfort, and accessories that are required to get you started is included in this solid guitar package from Davidson. This is a full size (39 inches) and complete scale solid electric guitar made of maple wood. It is an electric guitar featuring a maple neck and gloss finish.


Semi-Hollow: As the name suggests, you’re getting a smaller type of sound box while some support of amplification at the same time. This allows us to use an amp (with proper adjustments — there will definitely be some feedback worries of course), but they’re a lot lighter in weight than solid bodies and people tend to say they’re more versatile than our previously explained type. The superlatives used when it comes to hollow-body sound usually include “warm”, “bright”, and nice overtones. Preferred guitarists? Jazz, rockabilly, vintage country, etc.
Hi, my cousin gave me a bass guitar, the brand is called Cyclone by EKS Technology Inc. I looked it up and I could find barely anything. the bass has been in his garage since the early '90s and he told he that Fender bought the brand sometime around then, but I still can't find anything about the brand, apart from that they also produce electric guitars. almost as if the brand has been wiped from history. Any information regarding this brand would be gratefully accepted!
But opposites not only attract—sometimes they also make groundbreaking music together. This is certainly true of Zoom’s collaboration with Doe and Cervenka. Since that band broke up, Zoom has gone on to do session work with everyone from the late John Denver to the Raconteurs. He’s also become semi-legendary as a guitar amp hotrod guru, having tweaked circuitry for Jackson Browne, the Black Crowes, Los Lobos, L7 and Social Distortion, among many others.
* Advertised Price Per Month: The advertised price per month is the estimated monthly payment required to be made on your WebBank/Fingerhut Advantage Credit Account for a single item order, or if at any time your account has multiple items on it, then please see the payment chart for payment terms. The advertised price per month will not apply. See Full Cost of Ownership.
Once everything is assembled, check through the instructions one last time for any additional notes on connections, power etc (don’t waste all your hard work by blowing up the board with the wrong power supply). Then plug in your pedal and give it a try. There’s a good chance it will work first time. If not, go through the instructions again step by step and look to see where the problem might be. Missed, incorrect, or reversed components are the most common causes and can be diagnosed just by checking each step carefully.
Hold on now, this is my story, right? Anyways, realizing that I don’t use multiple amps live, and that I tend to stick with 1 basic amp sound, this was going to be easier than I thought. The amp sound I use is more of a Fender Twin sound with a little more mids, but not as much as say, a Deluxe. The gain is something I get from my pedals (like an 805 Overdrive and a Vapor Trail Analog Delay).  I didn’t need a device for live playing that replicated dozens of amps, cabs, and microphones. My setup is simple: Good pedals plugged into a simple modeler like the Tech 21 Fly Rig 5.  It is a simple amp modeler with reverb that I can even use as a full pedalboard if mine goes down. Getting use to IEMs with a well-mixed band took a little bit of doing, but after a few gigs, I had adjusted just fine. You can change your own balance of the band in your own ears, but it is sort of like listening to a CD and playing along with it. It is not much different than what I do at home, anyway, so once I got over the ‘hangup’ of not carrying my amp (my back thanks me), and not seeing my amp behind me, it made a lot of sense. We take 50% less gear now to gigs, and the recordings (and reviews) are much, much better. My ears don’t ring for 2 days after. I can still get glorious feedback (from my pickups hearing the PA sound), and all of the little tricks I do on guitar remain in tact. The pickups on my guitar still deliver the same sound. To my ears, it is easier to mix out front, and much, much easier to balance all of the instruments without all of the stage volume. We also have a lot more room onstage to move around. 
James Williamson was the man who facilitated Iggy Pop’s transition from self-lacerating Stooges frontman to solo artist, icon and all-around elder statesman of punk. In a way, Williamson was the only man for the job. He shared Iggy and the Stooges’ Detroit garage rock roots and was a friend of Stooges founding guitarist Ron Asheton during the mid Sixties.
As you'd expect, the most important decision to make with multi effects pedals is the choice of which effects, specifically, you want in them. The Electro-Harmonix Epitome Multi-Effects Guitar Pedal, for instance, is a veritable buffet of effects including flanger, chorus, reverb, pitch-shifting and more. But if you're looking for an expression pedal, you'll probably be more interested in a unit like the Vox StompLab IIG Modeling Guitar Effect Processor, which has one of those built in. Both of these multi effects pedals are top sellers, which comes as no surprise considering the versatility they bring to the table.

In 1944 Gibson was purchased by Chicago Musical Instruments. The ES-175 was introduced in 1949. Gibson hired Ted McCarty in 1948, who became President in 1950. He led an expansion of the guitar line with new guitars such as the "Les Paul" guitar introduced in 1952 and designed by Les Paul, a popular musician in the 1950s and also a pioneer in music technology. The Les Paul was offered in Custom, Standard, Special, and Junior models.[15] In the mid-50s, the Thinline series was produced, which included a line of thinner guitars like the Byrdland. The first Byrdlands were slim, custom built, L-5 models for guitarists Billy Byrd and Hank Garland. Later, a shorter neck was added. Other models such as the ES-350T and the ES-225T were introduced as less costly alternatives.[16] In 1958, Gibson introduced the ES-335T model. Similar in size to the hollow-body Thinlines, the ES-335 family had a solid center, giving the string tone a longer sustain.
Seagull is a Canadian company that produces hand crafted acoustic guitars. It has solid top guitars which offer richer sound, broader dynamic range, and sound becomes better as time pass by. The neck of the guitar of the seagull guitar has either Silverleaf maple or Honduras mahogany. Silverleaf is less permeable than mahogany that provides an incredibly smooth sensation but has an identical denseness. Some really good guitars from the line up of Seagull are Original S6 Cedar, Entourage Rustic S6, and Entourage Rustic CW QI.
Vintage Gibson Les Paul Special model, introduced in 1955 This 1957 model is killer.Utilizing the Junior’s solid Mahogany body with single cutaway shape but  finished in what Gibson called Limed Mahogany which appeared white on black and white television sets which gives it the nickname of "TV Special"A neck pickup with accompanying volume and tone circuitry was also added making the Special an affordable but still professionally playable instrument. The Special was sold in this configuration until 1958 . Gibson’s surviving shipping records indicate approx. 1,452 Les Paul Specials were shipped in 1957. MORE HERE.
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.
Some guitarists and guitar makers avoid this by including an additional resistor, around 4.7kOhms, in series with the capacitor. This provides a minimum level of resistance, so the tone circuit is never at “zero” even when the knob indicates it. You can see in the chart that around 4kOhms (about “1” on the tone pot knob), there’s no hump in the midrange, just a very rapid falloff in the upper mids and treble frequencies.

you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki


For those who like that 1950s style Gretsch sound, you’ll appreciate the Gretsch Dual-Coil humbuckers which can go from glass like cleans to smooth low growls to all out riff worthy dirt when you add some distortion to your amp. The single cutaway design and maple neck with gloss polyester finish make it extremely comfortable to play too. A guitar beginners and professional musicians alike, can enjoy.
Double-neck (or, less commonly, "twin-neck") guitars enable guitarists to play both guitar and bass guitar or, more commonly, both a six-string and a twelve-string. In the mid-1960s, one of the first players to use this type of guitar was Paul Revere & the Raiders' guitarist Drake Levin. Another early user was John McLaughlin. The double-neck guitar was popularized by Jimmy Page, who used a custom-made, cherry-finished Gibson EDS-1275 to perform "Stairway to Heaven", "The Song Remains the Same" and "The Rain Song", although for the recording of "Stairway to Heaven" he used a Fender Telecaster and a Fender XII electric twelve-string. Mike Rutherford of Genesis and Mike + the Mechanics is also famous for his use of a double-neck guitar during live shows. Don Felder of the Eagles used the Gibson EDS-1275 during the Hotel California tour. Muse guitarist and vocalist Matthew Bellamy uses a silver Manson double-neck on his band's Resistance Tour. Rush guitarist Alex Lifeson is also known for using double-neck guitars in the live performance of several songs. In performances of the song "Xanadu" during the band's 2015 R40 anniversary tour, Lifeson played a white Gibson EDS-1275 double-neck guitar with six-string and twelve-string necks, while bassist Geddy Lee performed with a double-neck Rickenbacker guitar with four-string bass and twelve-string guitar necks.
×