Paul Reed Smith is a relative newcomer having been born just 2 years after the Stratocaster was created, and founding PRS Guitars in 1985, but in that relatively short period of time PRS have made a huge impact on the guitar world, have been used by the likes of Carlos Santana, Ted Nugent, Dave Navarro. and Mark Tremonti, are now the 3rd biggest electric guitar manufacturer in the USA, and have earned their place among the best electric guitar brands.
If the LR Baggs Venue is a little too expensive for your taste, the Acoustimax Sonic Maximizer preamp from BBE gives you a lot of the same controls at less than half the price. Like the Venue, the Acoustimax is ideally designed for the gigging or studio acoustic guitar player who wants to have more control over their tone and be able to adjust for different rooms and environments. BBE delivers this control with a five-band EQ, as well as feedback and frequency dials.

Rounding out our list of the best acoustic-electric guitars, the Yamaha L-Series LL6 is a functional, reliable and great-sounding guitar. The LL6 features a solid Engelmann spruce top that’s treated with Yamaha’s ARE (Acoustic Resonance Enhancement) technology. This gives the guitar the rich tone that you’ll only find on guitars that have aged for many years.

Honestly, a couple of years back I never looked at Fender for acoustic guitars because everyone was always talking about Taylors, Gibsons, Martins, Takamines, Paul Reed Smiths etc. Despite being a very good electric guitar company not to mention the inventor of the no. 1 guitar in the world, the strat, everyone always looked Fender, alongside with Ibanez and Washburn (good electric guitar brands) as bad acoustic manufacturers. I was one of them too. For me, Washburn and Ibanez might be a good budget acoustic guitar manufacturer but they don't deserve to be high in this 'top acoustic guitar brands' list. But for Fender, these past few months my mindset about them changed. I never realized how authentic and good sounding fender acoustics were way back then but I'm happy now that I changed my mind about them. I love them now. It's not about having vintage acoustics, or having high end prices. Fender don't set their prices as high as taylor, martin or gibson but they must not be judged ...more
Chorus: Since this is still a repeating effect that has a tempo component, the chorus of a song tends to be a tough fit.Verse: The lower intensity and high emotion of most verses in Christian worship leaves room for some tremolo effect, depending on what the guitar is doing.Bridge: Short solos during the bridge are an ideal place for the tremolo effect, particularly if it hasn’t been used in other parts of the song.
ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
#A1056:Another super rare piece from Guitars West! This little number found its way across the pond and onto our doorstep. A very early VamPower 70's 100 watt P.A. 6 channel input head. With speaker channels, one 4 ohm-100w-#1 & 2 input, one 8 ohm-100w-#3 & 4 input, one 15 ohm-100w-# 5 input, two 8 ohm-50w-# 1 & 2 input, two 15 ohm-50w-# 3 & 4 input.
Go to iOS Ram List  Both the above sets convert your device or PC to the equivalent of a high-end sound module for your midi keyboard.  It has the full 15-velocity-layered version of the Yamaha C5 Grand (592mb) along with lots of other sounds. This set also includes extra string sounds that are in the Nice-Strings-PlusOrchestra set (all except the harp).

1) The tuning keys (machine heads) are as bad as it gets and if you're planning on keeping this guitar for a while and making it really workable plan on changing them ASAP and throwing the others away as far as you can throw them - Shame on you Yamaha, you could have at least used some half decent tuners!! These are an insult to your good name. So I replaced mine with Grover Sta-Tite V97-18NA (with brass colored gear) which are the best tuners "for the money" ($40) for any guitar especially for this one. However, be aware that you will also need to replace the Yamaha bushings because the I.D. is too small for the Grover post and, unfortunately,the Grover bushing O.D. is too small for the holes in the Yamaha headstock. The correct bushing that will allow an easy proper fit of the Grover tuning pegs to the Yamaha APXT2 is Kluson MBG65N or B bushings (Google it). If you elect to do this instead of letting your friendly Luthier do it, be advised that when you knock out the stock Yamaha bushings, since they're press fit it may have a tendency to split the wood on the top of the headstock. This one modification will bring this guitar from the level of a toy trying to be a serious contender to the best little guitar that money can buy.
This cheap acoustic guitar is highly recommended for beginners on a budget. It continues to stand among the best selling acoustics, and many a young musician has had this as their first ever guitar. It features a familiar combination of spruce top, mahogany body and neck, and rosewood fretboard. The guitar's classic configuration and traditional dreadnought shape works well with almost any type of music, from folk to rock and everything else in between.
If your interests are on the jazz side of things, the Ibanez Artcore series is worth a close look. These economical hollow-body guitars are perfect for players at any level who want a well-crafted instrument that won't break the bank. They come with a well-deserved reputation for solid stone and sustain and they hold tuning reliably, making the Artcore guitars a good choice to get the most bang for your buck.
Jazz guitarist Les Paul spent years tinkering with his own electric guitar designs, but his first creations were initially rejected by Gibson’s parent company in 1946. But just a few short years later, on the heels of Fender’s success with the Telecaster and Paul’s growing popularity as an artist, Gibson struck a deal with Paul to play and endorse their new design for a solid-body electric. Gibson released the guitar as the Les Paul signature model in 1952, and since its release, it has become one of the world’s most imitated and sought-after guitars, with late ’50s vintage models being among the most prized instruments in the world.
An effect made popular by guitarists like Hendrix, Jerry Cantrell, Slash and many more, the Wah-Wah effect is a pedal-controlled Q filter. The ultra-recognisable vocal-like effect is obtained by having a Q parameter going back and forth, thus “opening” your guitar voice or narrowing it down removing treble frequencies. Words cannot really describe it, and since its inception the Wah was featured on countless records. The Dunlop Crybaby is by far the most popular wah pedal, built with trusty analog circuitry. Despite Dunlop’s fame, many other manufacturers built beautiful pedals that have left their mark in music history due to their slightly different sound, such as the VOX 84x series, the Fulltone, and the super modern optical Morley Wah.

If your volume and tone knobs start to make crackling or popping noises through your speaker whenever you’re plugged in, or if the signal is weak, inconsistent, or cuts out altogether in certain positions on your controls, some foreign matter (however minute) has probably lodged itself in your controls. Dust and rust pose the greatest potential threat to any electronic connection.
If you just want to send that current through to the amplifier unchanged, that would mean keeping all volume- and tone knobs turned all the way up. But the knobs can be useful. Underneath the volume knobs, the electrical signal is hooked up to two places; one line goes out towards the amplifier, and the other is effectively contained without being sent to the amplifier. The more you turn down the volume knob, the more of the signal you contain instead of sending it through the amplifier.

Chords in a song are arranged according to chord progressions, which are chord intervals that work pretty much the same as single notes in a scale. It’s very important for you to learn chord progressions for the various keys, because then, as long as you know what key the song is in, you can figure out the chords in it very easily. There may be times when you want to change the key of a song to one you can sing or play in better, and for this, knowledge of chord professions is critical.

{ "thumbImageID": "SX100B-Series-II-Electric-Bass-Guitar-Black/H11150000002000", "defaultDisplayName": "Rogue SX100B Series II Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51278002525870", "price": "89.99", "regularPrice": "119.99", "msrpPrice": "239.99", "priceVisibility": "1", "skuUrl": "/Rogue/SX100B-Series-II-Electric-Bass-Guitar-Black-1278002525870.gc", "skuImageId": "SX100B-Series-II-Electric-Bass-Guitar-Black/H11150000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51278002525865", "price": "89.99", "regularPrice": "119.99", "msrpPrice": "239.99", "priceVisibility": "1", "skuUrl": "/Rogue/SX100B-Series-II-Electric-Bass-Guitar-Candy-Apple-Red-1278002525865.gc", "skuImageId": "SX100B-Series-II-Electric-Bass-Guitar-Candy-Apple-Red/H11150000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Blue", "sku": "sku:site51278002525876", "price": "89.99", "regularPrice": "119.99", "msrpPrice": "239.99", "priceVisibility": "1", "skuUrl": "/Rogue/SX100B-Series-II-Electric-Bass-Guitar-Blue-1278002525876.gc", "skuImageId": "SX100B-Series-II-Electric-Bass-Guitar-Blue/H11150000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Sometimes, I find the way that they progress songs odd, and that it actually makes them more difficult by causing you to use screwy timings, use easy and incorrect finger movements that you have to completely change when new notes are added, or when it would be simpler to just use cords (for example, in higher ground there is a part where you first play through and have a G and then an A on the 6th string. A beginner will probably play the G with the index finger and then the A with the ring finger. But later these turn to power cords and this no longer works as you have to slide your hand down. I've found that type of issue common, particularly with this song - I've only played about 6 songs so far in the game). Likewise, the strategy of playing is not always the best, for example they'l play a 2, 3, and 6 on the 6th string and maybe an open 5th string and the 2nd fret of the 5th string. Much easier and more efficient to convert the 6th fret on the E string to the 1st on the 5 string to keep everything within a reasonable reach(cheating by moving the note does work since the game is based on tone, but is not something a beginner would know)
Les Paul developed one of the first practical solid-bodied electrics made of wood, which he dubbed "The Log". He built the prototype himself -- possible the first practical solid-bodied electric -- in the late 1930s. In 1941, he approached Gibson about making it, Gibson, but they weren't initially interested. Meanwhile, Leo Fender had been independently been developing his own solid bodied guitar, which was released commercially as the Esquire in 1950. By then, lots of people were recording electric guitar.
{ "thumbImageID": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "defaultDisplayName": "Yamaha FX335C Dreadnought Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000000265", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst-1500000000265.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000000264", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black-1500000000264.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000000262", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural-1500000000262.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Categories: Guitar manufacturing companies of the United StatesGuitar amplifier manufacturersManufacturing companies based in ChicagoManufacturing companies established in 1890Companies disestablished in 19681890 establishments in Illinois1968 disestablishments in IllinoisDefunct companies based in IllinoisMusical instrument manufacturing companies of the United States

Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Top Wood: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 6 In-Line, Reverse - Bridge: Tremolo - Cutaway: Double - Hardware: Black - Pickup Configuration: S-H - Guitar Features: Pickguard - String Instrument Finish: Five Alarm Red, Desert Sun Yellow, Magenta, Black, White

One of  the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.
A question which causes much thought and divide! Catch 22 to a degree: you can't play songs till you've learnt some chords, but just knowing some chords will mean you actually can (though you are not aware of it) play loads of songs. There is a plethora of songs out there with only three chords (some with only two!). Their differences are that the order of chords is slightly different for each - with the exception of the thousands of 12-bar tunes!

Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.

If the microphonic problem is not due to the cover, or is with a singlecoil pickup you have two options. First is to wax pot the pickup. The second is to pot the pickup in something else. Laquer was once commonly used, but it can cause a problem with some types of insulation (disolving it) and prevents future repair (other than full rewind). I have found a great alternative to both. It is vinyl sanding sealer. (I'm using Sherwin williams wood classics interior sanding sealer) This stuff penetrates deeply, dries solidly, and allows for repairs same as wax does. It requires no special equipment or care. Just submerge the pickup wait till bubbles stop appearing, pull it out and set it on a paper towel to dry. Once the excess has run off (a minute or so) wipe off the top and bottom of the pickup with a rag and allow it to finish drying. In it's intended use it dries fully in an hour. I leave them overnight.
The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
The benefit of a compressor lies in that every note played will be at nearly the same amplitude, and therefore nearly equal in volume. This will help normalize tones that are sometimes lost in the mix because of complex overtones, and it will result in a more articulate sound. Notice that if you don’t pick all notes of an arpeggio at exactly the same pressure you will likely get a different sound for each note, especially if you are playing a tube amp. Tube amplifiers react dynamically to stronger and weaker signals it’s the allure of them and thus the non-uniformity of picking at different strengths will be exaggerated. A compressor will fix this problem and normalize all notes of the arpeggio regardless of the player’s technique and equipment, which is consequently why many soloists prefer them.
Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.
Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
Yeah, I wasn't meaning to disparage either brand. While not necessarily "cool", they both offer solid stuff and a really good value that really competes with luxury brands. I'm not a car guy, so I'll stay on the guitar side for an example - Schecter can offer a mahogany body with a flame maple top and binding, set neck, ebony fretboard with abalone inlays, 25.5" scale, compound radius, original Floyd, and name brand pickups for $1000, give or take. Seems like you have to get up into Ibanez's Prestige line or the Jackson USA line to get all that, and then you're paying around $2k.
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
The Sex Pistols, Steve Jones' brutish power chords and flamboyant gutter-glam solos were a perfect mirror for the taunting bile of Johnny Rotten – and a yardstick for every punk-rock noise-maker that followed. His legacy was set with indelible riffs on one record – 1977's Never Mind the Bollocks… – that inspired guitarists from Slash to Billie Joe Armstrong. It was an attitude as much as a sound. As Jones told a journalist during his days with the Sex Pistols, "Actually, we're not into music. We're into chaos."
This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
Increasing the bass and treble while reducing or eliminating the centre midrange (750 Hz) results in what is popularly known as a "scooped" sound (since the midrange frequencies are "scooped" out). Conversely, decreasing the bass while increasing the midrange and treble creates a punchy, harsher sound. Rolling off all of the treble produces a dark, heavy sound.
The first Hagstrom electrics actually came to the U.S. beginning about 1959, carrying the Goya name imported by New York’s Hershman (Goya acoustics were made by Levin, also in Sweden). These were the now-legendary sparkle-covered hollowbody “Les Pauls” with the modular pickup units. However, while the Goya acoustics continued on in the ’60s (eventually to be distributed by Avnet, the owners of Guild in the late ’60s), the Hagstrom electrics took on their own identity and switched to Merson. The first Hagstrom I guitars were the little vinyl-covered mini-Strats with the “swimming pool” pickup assemblies – basically two single-coil pickups mounted in a molded plastic assembly looking like its nickname, with sliding on-off switches and the Hagstrom fulcrum vibrato (which was also used on early Guild solidbodies). These were followed by similar wood-bodied Hagstrom IIs, then the quasi-SG Hagstrom IIIs in the ’60s. Hagstrom electrics continued to be imported by Merson through most of the ’60s, but by the ’70s distribution had switched to Ampeg, which was responsible for the Swedes, and several thinlines, some of which were designed by Jimmy D’Aquisto. Hagstrom hung around until the early ’80s before disappearing.
This is a Supro Supreme Hawaiian Guitar Model 1400 from somewhere around 1945. I've seen an identical one that was purchased new by the original owner during that year exactly. That date appeals to my love of WWII history, of course, because it was the last year of the war. I found this one languishing in the back of a vintage guitar store in Williamsburg, Virginia, while my wife and I were on our 30th anniversary holiday trip. The guitar is covered in lovely reddish-brown "mother of toilet seat" and has a non-slip back.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Muelle principal Tope Bloque del trémolo Varilla de tope Con la guitarra afinada correctamente, ajuste el muelle principal y verifique que la varilla de tope toque el bloque del trémolo y el tope. Si la varilla de tope no toca el bloque del tremolo y el tope, gire el tornillo de ajuste del muelle principal hasta que lo haga.
Enlarging/ Drilling Holes: Often required to upgrade tuners, or occasionally to change control pots. Enlarging a hole in wood seems simple enough, and it is. But it's also an easy way to ruin the finish of the guitar and worse. The problem is because there is no wood in the center of the hole, the edges pull upwards instead of cutting. It often results in large ammounts of chipout or worse. The answer is to run the drill BACKWARDS. This will ream the hole out without the risk of chipping. If the hole needs to be made significantly larger, it is often best to use a bit one size up from the desired hole size and run it backwards till the drill has gone just below the surface. Now you can drill the desired size hole normally relatively safely. The washers or dress rings will hide the slightly larger starting bevel that remains. Whenever possible, drill half way through from both sides or clamp a "backer board" in place. Do NOT use much pressure on the drill, let it do the work, excess pressure is usually due to dull bits, and almost always results in some king of damage. If you must drill through the finish where there is no hole use the same method as described for significantly increasing the size of a hole, but apply masking tape over where the hole will be drilled prior to starting.
Late 1938: Scalloped "X" bracing with "rear shifted bracing", where position of the "X" moved further than one inch from soundhole (exact measurement varies, for example: a 1941 D-18 has 1 7/8" distance). So the X-braces were moved about 7/8" further down. And the tone bars were angled more parallel with the length of the guitar and further apart. These late-1938 to late-1944 guitars had deeper scalloped braces than the 1938 and prior forward or advanced braced guitars. This gives the late 1938 to late 1944 Martin guitars improved bass response (don't let anyone tell you that war-time Martins are not as good as pre-1939 Martins!)
Overdriven speakers create one of the most desirable distortion characteristics: crunch. The best way to test for this is to dial in a clean setting and turn the volume way up. Low-wattage speakers break up at lower volumes, but they have a tendency to turn to mush at excessive volume levels; high-wattage speakers may not break up at all. Choose a speaker that sounds lively, defined and harmonically rich at volume and distortion levels you’ll normally play at.

The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.

Gibson now restricts the use of the name Dobro to its own product line, but care should be taken in interpreting documents written before 1993 or from outside the US. In these cases, the terms “Dobro” and “dobroist” may not necessarily refer to a Gibson Dobro. For example, consider the references to the use of a Dobro guitar on songs like “The Ballad of Curtis Loew” by Lynyrd Skynyrd, “Valium Waltz” by the Old 97’s, “When Papa Played the Dobro” by Johnny Cashon the Ride This Train album, or “Gold Dust Woman“, a song by Fleetwood Macfrom the album Rumours which features a Dobro. Mark Knopfler of Dire Straitsis famous for his guitar of this style, featured on the cover of the album Brothers in Arms.[2]
by pedalhaven  @airbag3333  has a seriously stacked board! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
Martin’s first truly electric guitars were the Style F thinline archtops which began in prototype stage in 1961 and entered production in 1962. The F Series consisted of three models, the F-50, F-55 and F-65, all with bodies slightly less than 2″ thick and made of maple plywood with bound tops. All three had shapes roughly reminiscent of the dreadnought that made Martin famous, though slightly exaggerated with a wider lower bout. The cutaways were fairly wide and radical, cutting out at almost a right angle from the neck. The glued in necks had unbound 20-fret rosewood fingerboards, dot inlays and the typical squarish Martin three-and-three headstock. Necks joined the body at the 14th fret. Each bore an elevated pickguard and had a distinctive moveable adjustable bridge made of clear plexiglass.
Remember when I said that there were 2 amps widely used as practice amps and tools for guitar tech’s? Well, the Orange Micro Crush Mini Guitar Amplifier Combo is the other one. Warm ups before gigs, during set ups and maintenance work, this amplifier is relied upon to provide accurate sound and incredible tone anywhere, anytime. This is one of the best cheap amps available thanks to the fact it’s made by one of the most respected amplifier manufacturers in the world, powered via 9V battery and busts out some seriously amazing clean and dirty sounds.
The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more
As successor to the Bogner Triple Giant, the Fish is a pre-amp with a legendary status, due to it’s unique character and it’s 4-channel configuration. Originally introduced in 1990, the unit was limited to 250 pieces, and is a rare find now-a-days. But thankfully, Bogner decided to reintroduce the Fish, featuring a “Country”, “Shark”, “Strato”, and “Brown” channel. Just like the original, this amp can take on just about any style you throw at it!

The Marshall Mini Jubilee 2525C Combo amp is closely based on the highly-coveted Marshall Jubilee series of amps. The powerful preamp has been designed to the specifications of the original 2525 Silver Jubilee diagrams, making this an authentic reproduction of these now out-of-production monsters of rock. Don’t let this little beast fool you though, the ECC83 & EL34 valve set produces some seriously loud sounds through the single 12” Celestion G12M–25 Greenback speaker. Perfect for lead and rhythm, this great combo amp is ideal for both stage and studio!

There’s another wrinkle: vintage-style pickup magnets can weaken over time, resulting in a softer, smoother tone. Some pickups are designed to mimic this ageing process. Say you were looking for a vintage P.A.F.-style humbucker: You could choose between one of our models that that sounds like a pickup straight off the late-’50s production line (the Seth Lover humbucker), and another that mimics a similar pickup as it would sound and look today after decades of wear and tear (the Antiquity humbucker).
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
To find which Ernie Ball strings are right for you, the key is experimentation. Figure out which strings sound best to your ear, feel best on your fingers, and most importantly enable you to create the music you want. When you are ready to buy, head over to one of the 5,500 music stores that carry Ernie Ball products. You can discover these stores by visiting our Store Locator.
You may hear many guitarists or repairman talk about pots. What are pots? The word “pot” is short for potentiometer. A potentiometer is a simple electronic device that adjusts the flow of electric current. Most pots are basically glorified resistors. There are two outer lugs that carry the voltage to and from the pickups. The middle lug is a “swipe” lug that resists the voltage. When the knob is turned, the swipe resists more or less voltage allowing the volume to decrease or increase. Both volume and tone knobs are pots. The only difference between these two pots is that the tone pot has a capacitor soldered to the ground lug. The capacitor short-circuits the high frequencies disallowing them from reaching the output jack and eventually the amp. Your guitar will sound less trebly the smaller the resistance of the tone pot before the capacitor. For a more technical description of a capacitor, see the electric guitar capacitor page.
List of bass guitar brands that include the most popular and reliable models available. There is a lot to consider when looking for the perfect bass guitar for you. The body style, neck, scale length, tuning machines, intonation, fingerboard, number of frets, pickups and type of wood all make a difference in how your bass guitar sounds and feels in your hand. The most popular bass guitars include those from major manufacturers of musical instruments, including Fender, Yamaha, Warwick and more. Use this comparison of bass guitar brands as a guide when researching the best bass makers.
The MC5 were the nexus where radical politics and proto-punk belligerence first came together. This dangerous mixture touched off an explosion that’s still rocking the world today. The group burst out of Detroit in the cataclysmic year of 1969, with its roots firmly planted in mid-Sixties garage rock, and mutated by injections of inner-city R&B and free-jazz mayhem.
As suggested by the numerical designation, Martin’s 28 Series was essentially an upgrade or refinement of the earlier 18 Series. Martin typically indicates fancier materials and appointments with a higher number (a D-28 is fancier dreadnought than a D-18, etc.). These consisted of one guitar, the E-28, and one bass, the EB-28. The first prototypes appeared in June of 1980; production began in January of 1981.
Make sure to sit down and strum the notes when trying out a guitar. It should not be hard to push down the strings with your fretting hand, even if you are just starting out. The action should be as low as possible to make learning easy. Make sure to check for loose parts; there should be no rattling noises coming from the inside of the guide or inside of the neck. Also take a business card and run it along the bottom of the bridge to make sure that the bridge isn't coming off. An electronic system is not a big deal when buying an acoustic because it's relatively easy to add an electronic pickup component later on should you decide you need one.
Extra Features: This is where we’ll bucket a bunch of extras that could be important to you, depending where you are in your guitar playing journey, and what gear you might already have. Some multi-effects pedals include handy tools like a tuner, a looper pedal, a built-in expression or wah pedal, an input for an external expression pedal, the ability to double as a USB interface, the ability to be powered by batteries, and so on and so forth. It comes down to personal preference, but we generally like to see the inclusion of a tuner, and looper pedal, since both are extremely useful tools for most guitar players no matter their skill level.
Congratulations on buying yourself a top-notch axe — but you’re not ready to shred just yet. A good guitar also requires the right amp to achieve the right sound. Amps can be a daunting purchase (you certainly won’t be starved for choices on the beginner and enthusiast side of the price spectrum) and there are a lot of qualities that need to be taken into account. Want a low-cost amp that’s durable? Shoot for a solid-state amp. Want better sound? We suggest an all-tube amp instead. Want the most tonal variety on a budget? A modeling amp will get you all kinds of sounds without requiring a fleshed-out pedal board. But at any rate, no matter what you’re looking for in an amplifier, these 10 picks cover all the fundamental bases. So purchase, plug in and let’s rip.
The original guitar recording preamp was almost certainly the Scholtz Rockman, but within a few years we had several sophisticated competitors (from Sansamp, Groove Tubes and Mesa Boogie) using both solid-state analogue and tube circuitry. These all include speaker emulation of some kind, though usually offer few or no effects. On the whole they are easy to use and some produce excellent results, though they have less tonal flexibility than digital systems designed to model the characteristics of a range of specific commercial amplifier and speaker combinations.
Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:
A common format of bass amplifier–the "combo" amp–contains the amplifier electronics and one or more speakers in a single wooden cabinet. Combo amps have been used by musicians since the 1920s, as they are convenient for transporting to rehearsals and for performances at small to mid-size venues. Combo amps range from small, low-powered "practice amps" used for individual practice, to mid- and large-size and more powerful combo amps which produce enough volume for rehearsals and small to mid-size venues (e.g., nightclubs). For larger venues, such as stadiums, bassists may use the "bass stack" approach, in which one or more separate speaker cabinets, each with one or more speakers (but not containing an amplifier) and a separate "head" containing the amplifier electronics are used. With a large "bass stack", a bassist can obtain a much higher wattage and onstage volume than a "combo" amp could provide. As with an electric guitar amp, a bass amp is not simply used to make the instrument louder; performers use the preamplifier and equalizer controls and, particularly in amps from the 1980s and 1990s onward, the onboard electronic effects, to create their preferred tone.
The guitar player who makes his guitar sound anything but a guitar. Helicopter rudders, disc scratching, and his use of the kill switch for staccato like guitar riffs has made him probably the most innovative guitar player of our time. He is a guitarist who can take feedback, and ground hum from his own body into coherent music. Be it Rage Against The Machine, or Audioslave you can always see Morello’s signature licks shining through.
Johnny Thunders’ snot-nosed New York take on Keith Richards’ cool is one of the pillars on which punk rock was built. An Italian-American guy (birth name John Anthony Genzale Jr.) from Queens, he was born a little too late to be part of the Sixties rock explosion. But the bands of that era were his influences, and he put his own spin on them in the early Seventies as the New York Dolls came together with Thunders on lead guitar.

Note: When it comes to acoustics, I recommend you do NOT go super cheap (unless you know what you’re doing). I’m not joking about this. The results can be painful both physically and emotionally when you’re not able to learn anything. I made this mistake starting out and I regret it 100% (I’ll tell you about this later on). Save yourself the trouble. Get a decent, playable guitar to learn on and you’ll be one step ahead of most beginners who try to go cheap, then end up quitting because it’s too hard to learn (cheap guitars are hard to learn on!).

At first it sounds kind of like a buzzsaw, but after listening to the song, people usually have a hard time getting the catchy riff out of their heads. The best part? It's one of the most fun beginner guitar songs and anyone can play it! The riff is played entirely on one string, the A string and consists of only three notes. Fun fact, the riff was supposed to be a placeholder for a horns section, but they loved the fuzzy guitar tone so much they never got around to the horns.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Ash - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Natural Blue
As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.
{ "thumbImageID": "John-Mayer-Silver-Sky-Electric-Guitar-Horizon/L18249000003000", "defaultDisplayName": "PRS John Mayer Silver Sky Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Onyx", "sku": "sku:site51500000211941", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Onyx-1500000211941.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Onyx/L18249000001000", "brandName": "PRS", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Horizon", "sku": "sku:site51500000211943", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Horizon-1500000211943.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Horizon/L18249000003000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Frost", "sku": "sku:site51500000211942", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Frost-1500000211942.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Frost/L18249000002000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tungsten", "sku": "sku:site51500000211944", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Tungsten-1500000211944.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Tungsten/L18249000004000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }