It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.
But opposites not only attract—sometimes they also make groundbreaking music together. This is certainly true of Zoom’s collaboration with Doe and Cervenka. Since that band broke up, Zoom has gone on to do session work with everyone from the late John Denver to the Raconteurs. He’s also become semi-legendary as a guitar amp hotrod guru, having tweaked circuitry for Jackson Browne, the Black Crowes, Los Lobos, L7 and Social Distortion, among many others.

Guitar combo amplifiers were at first used with bass guitars and electric pianos, but these instruments produce a wider frequency range and need a full-range speaker system. Much more amplifier power is required to reproduce low-frequency sound, especially at high volume. Reproducing low frequencies also requires a suitable woofer or subwoofer speaker and enclosure, with bass cabinets often being larger in size than a cabinet for mid-range or high-range sounds. As well, the open-back cabinets used on many electric guitar amps, while effective for electric guitar, do not have good bass reproduction.
To tell you the truth, in the first few years i started playing, after i learned the use of the switch, I was approach by a man that also a guitarist and asked, "YOur guitar sounds good, I believe it so expensive". Well, I bought the guitar only for $150 dollars, But, I toggled the switch to the right pickup on the right time, makes my guitar sounds like an expensive guitar.

At least one company, Audiovox, built and may have offered an electric solid-body as early as 1932. Audiovox electric guitars were built by Paul Tutmarc[1] who is also credited as the co-inventor of the magnetic pickup along with Art Stimpson, and the fretted electric bass guitar. Bob Wisner worked for Paul converting tube radio amplifiers into guitar amplifiers and eventually developing his own amplifier circuits so Paul's instruments could be sold along with their own amplifiers. Paul was unsuccessful at obtaining a patent for his magnetic pickup as it was too similar to the telephone microphone coil sensor device. Audiovox production was handed over to Paul's son, Bud Tutmarc, who continued building these instruments under the brand, "Bud-Electro" until the early 1950s. Bud Tutmarc had been delegated by the senior Tutmarc the task of winding the pickup coils used on his father's and he continued producing them for his own guitars. He used horseshoe magnets in a single-coil and later a hum cancelling dual coil configuration. Bob Wisner was hired by Rickenbacher, later spelled Rickenbacker and may have passed on Tutmarc's magnetic pickup technology and helped them develop the more familiar bar magnet and pole-piece pickup construction still widely used today for their cast aluminum electric guitar, nicknamed The Frying Pan or The Pancake Guitar, beginning in 1933.
Last Update Sept 22nd, 2018 Electric guitars are those that have an amplification feature. You can connect your guitar to a power source and amplify the sound produced onto a loud speaker. They are normally a perfect choice for stage performances and bands. Below are brief reviews of 10 best electric guitars in India, which are among the best in Indian market. These best electric guitars were curated by our experts according to their popularity, reviews and ratings by people across India.
Artwork: Improved Fender pickups from 1944. 1) A general view of a guitar with the pickup shown in blue and the strings colored orange. 2) An end-on view (looking down from the head toward the bridge) shows one version with a single pickup coil (green) spanning all six strings. 3) Looking from the side, you can see how the strings thread through the pickup coil. 4) In an alternative design, there are six separate pickup coils, one for each string. From US Patent 2,455,575: Pickup Design for Instruments by Clarence Leo Fender and Clayton Orr Kauffman (filed September 26, 1944, issued December 7, 1948). Artwork courtesy of US Patent and Trademark Office.

Every guitar player loves pedals. We all have at least a handful in our collection and will always try a new one we come across. When you're starting out, you probably know when you need something, but you aren't exactly sure what it is. You may not even know what flanging or phasing actually does to your signal and how that's different from a chorus effect. We're offering below some great effect choices that will add some character without overtaking your sound, so you can really distill out what each of these effects do. While distortion and overdrive have their place (and are usually the effects beginners jump to initially), the following picks offer some other alternatives that will feed your creativity and help get you started.

Combo amps come with a speaker built into the amplifier cabinet, making them heavier but more convenient. On the other hand, amp heads are lighter because they don't come with a speaker built-in. The amp head configuration allows you to freely choose the type of speaker and speaker cabinet that you prefer, with the complication of ensuring amp and speaker compatibility. Interestingly, there are now some amplifier heads that com come with built-in speakers that are only good for practice, making them technically a combo amp, but that's another story in itself.

Since treble frequencies pass through a capacitor, what would happen if you routed the positive lead THROUGH the capacitor rather than having it ground out frequencies?  The answer: just the opposite - the signal from you pickups would pass through the capacitor and only treble frequencies would get through.  Aha!  A new type of tone control.  The illustration below shows this type of wiring in a bit of an advanced concept.

Because each of these requires duplicating your signal once or several times, you want to do it after you've added all of the other dynamic, filter-based, and gain effects. There is no sense in trying to get a distortion or equalizer pedal to react to a series of recombined signals when you can take care of that before hand. You'll get much higher quality and accurate modulation out of it this way.
While the Boss MS-3 is a fairly recent release, it does have quite the number of reviews, most of them coming from users who have nothing but good things to say about their experience with the unit. One user summarized what most reviewers felt by saying that the MS-3 is a "game changer". But it's not just about its amp and effects switching, because many were just as impressed with the sound quality of many of its built-in effects, including its overdrive and modulation sections. It's compact and portable design is also very much appreciated, making it an easy addition to any setups.
Two types of switches are commonly used for guitar mods. One is a potentiometer with a switch—a push/pull, push/ push, or the Fender S-1—and the other is a common toggle, which is available in different sizes, shapes, and configurations. When adding a switch to a passive circuit, you don’t have to worry about voltage and power ratings—all that matters is that switch will fit your guitar!
For beginners looking to practice their first notes, chords and songs, nothing more than a couple of watts is needed – in fact, most dedicated practice amps won’t offer much more than 10 watts. If you are planning on jamming with a full band or starting to gig in small venues (think bars, clubs and small halls), then anything from 15 to 50 watts will suffice. Bigger gigs, including auditoriums and outdoor festivals, will demand upwards of 100 watts.
While relatively new compared to many established brands on the market, Seagull has managed to gain traction in the past few decades. Started in Canada in 1982, the company focuses on building high-quality acoustic and acoustic-electric guitars. These usually use solid tops rather than laminated tops, resulting in crystal-clear sounds and superior quality.

This is a good list although after owning most of these brands or at least having played all of them, I would re-rearrange the order. Gibsons although a good guitar are simply no longer the quality of Taylor or Martin. They are lagging behind these guys. Yamaha and Epiphone despite online "reviews" are also not near a Taylor or Martin for that matter. So I would drop Gibson, Yamaha, and Epiphone down the list, and although Seagull makes a decent guitar, they are no better than Blueridge, so I would drop them down and bring Blueridge up. Of course this is all subjective, but here is my list re-ordered for what its worth.
A very useful way of creating space for guitars in the final mix is to use tunable high-pass and low-pass filters to remove extreme frequencies that do nothing to enhance the guitar tone, but invade the space of other instruments that do perform in those areas. Generally speaking, it’s worth losing everything below 80Hz, although it’s not unusual to set the filter a good degree higher. Shaving off some high end may also be useful to help place the guitar in a specific area of the audio spectrum. Filter at the mixing stage, as the sound of the recording will often determine the optimum filtering points.
Rather than superfluous power, I suspect the copywriter really meant something like superior!! However, then again, maybe they did get it right, because they featured a 6A6 preamp tube that was exceptionally weak and microphonic. These amps also had a chassis built in Chicago, by Chicago Electric, with a cabinet made in Chicago, by Geib. These had performance problems and in 1937, National Dobro went back to using Webster chassis with Geib cabinets.

Something else to understand is that different styles of guitars offer specific pickup and switching designs that define the guitar’s sound. Depending on what type of music you want to learn, some guitars will be good and suit you better than others. That frequent adjustment of the guitar’s electronics during a song will become a big part of your playing style and it’s worth learning from the outset. Read on, and you’ll see what I mean. Oh—and a word of warning. Some “beginners” guitar bundles are for kids. Make sure you’re buying a full-sized instrument.

Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.
Second, the right side of the pedal is a feedback controller and a series of knobs that allow you to adjust the Sonic Maximizer feature. This hallmark of the Acoustimax basically streamlines your guitar's tone, matching up the lows and highs of your acoustic's resonance and projecting them at the same time. Without this feature, the tone of an amplified acoustic can be inconsistent, projecting higher frequencies earlier than the low end resonance.

I am not completely sure this tuner info is completely accurate. Sorry about that... Remember as a general rule Grovers were used on style 21 and above, and Klusons were used on style 18 and lower. There are some exceptions (like during 1940 to 1945, and pre-1930s). On pre-war Grover tuners, there are basically two types used on Martins: G-93 (round button 'butterbean') and G-98 (scalloped buttons, aka "Sta-Tite"). Both came in 6:1 and 12:1 tuning ratios, with 12:1 coming about in 1938 (and replacing the 6:1 ratio). The post-1938 12:1 ratio Grovers can be always be identified since they combine the thin seamed tuner buttons with the long pointed baseplate, and the tuner gear is screw mounted. The 1938 and prior Grover G98 tuners have a thin seamed button combined with the a square tipped baseplate, and always had the 6:1 ratio. They also had the riveted tuner gear. Ater WW2 the G98 was reintroduced with pointy baseplates and a screw mounted gear, and this was copied by Waverly, Grover, Schaller, etc after the war. Also Martin used original Waverly tuners (open back, rounded base tips, butterbean buttons) after WW2 on 00 and 000 and some D guitars style 18 (and some 28) in the late 1940s and 1950s.

Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More
Let's start with the scenery. The guitar riff I'll use today was conceived using an effects chain made up of a delay pedal (the Electro-Harmonix Memory Boy). The pedal doesn't have a tap tempo feature, so I had to adjust the delay time by ear as precisely as possible while playing the song. Recorded in the "classic" way, without racking my brains and simply putting a mic in front of the amp, I get something like this:

Bass amps come with a range of different input and output jacks, depending on the cost of the amplifier and its intended purpose. The least expensive practice amps may only have a single 1/4" input jack and no output jacks. Some practice amps and small combo amps have RCA or 1/8" inputs for plugging an MP3 player or CD player into the bass amp, to facilitate practicing with a recording. Some amps have a high-gain input, for basses which have internal preamplifiers one the instrument. The high-gain input is routed through a pad (attenuator). An amp may also have a low-gain input, which is unattenuated, for regular basses. Some combo amps have a 1/4" auxiliary input, which could be used to plug in a keyboard, drum machine or second bass.
When guitarists who play jazz and other more complex styles improvise, they use scales, modes, and arpeggios associated with the chord progression. The must learn how to use scales (whole tone scale, chromatic scale, etc.) to solo over chord progressions. Soloists try to imbue melodic phrasing with the sense of natural breathing and legato phrasing used by players of other instruments. Jazz guitarists are influenced by trumpet, saxophone, and other horn players. Celtic fingerstyle players are influenced pipes and fiddles.
When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.
In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a "pickup and amplifier set" which a musician could use with her/his existing guitar. In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson developed prototype combo amps, but these never got produced and sold. By 1935, Electro/Rickenbacher sold "more amps and electric guitars than all the amps and electrified/electric guitars made from ’[19]28 through the end of ’[19]34, combined".[1]
Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.
One half step down from standard Drop A. Used by bands such as Trivium on some songs from Silence in the Snow and The Sin and the Sentence, Destrophy, TesseracT, Brian "Head" Welch, After The Burial on some songs from their Rareform, In Dreams and Dig Deep albums, Within the Ruins, In Hearts Wake and Periphery. Jim Johnston used this tuning for the song "I Bring the Darkness (End of Days)".
Altium is known for it’s high end PCB development application called Altium Designer which starts at around $7000 and there’s a yearly subscription fee too. Gulp! Altium Designer is used by many industry professionals for product development. Altium just recently released Circuit Maker, which has many of the features of Designer and is, Gasp!…. Completely free!  The trade off at this point seems to be that it’s designed around a community and apart from a couple of private slots, you have to share your work, so it’s not very useful for completely proprietary projects.
Paul Gray (b. 1972 d. 2010) swapped his longtime association with Warwick basses for a customized version of the ATK bass series, the PGB1. He was impressed with the ATK bass after he bought one from a pawn shop and told Ibanez that he would endorse them if they put the ATK series back into production. He switched to his signature model shortly before recording of the Slipknot album All Hope Is Gone and used them until his death in 2010.
The two common guitar amplifier configurations are: a combination ("combo") amplifier that includes an amplifier and one or more speakers in a single cabinet, and a standalone amplifier (often called a "head" or "amp head"), which passes the amplified signal via a speaker cable to one or more external speaker cabinets. A wide range of speaker configurations are available in guitar cabinets—from cabinets with a single speaker (e.g., 1×10" or 1×12") or multiple speakers (e.g., 2×10", 4×10" or 8x10").
Musicians might not want to be replaced by machines - we (or they, as it were, because I lost whatever musician credentials I might have earned annoying people with my wooden flute as a beggar on the streets of a tourist town when I started programming computers to play music) might make a strong case that no machine can express the human soulfulness of music. It is easy to conclude that, the more of the musical task that is assigned to a machine, the less soul is expressed in the music. Well, great big rock-n-roll wall of sound that all over your acoustic guitar soul. That stack of Fender amps I can hear five miles from the stadium where David Gilmore is strumming a guitar is as much an instrument as was the Shepard's lute - and a much more popular instrument now, for audiences attuned to the daily roar of tires crushing air against pavement.
COST – I have touched upon this topic several times maybe but I feel like I need to reiterate. Amps are usually not a cheap thing to come by, especially if you want a tube amp. BUT practice amps are good because they help beginners develop their skills without having to spend several hundred. Needless to mention, even practice amps come at various prices. For instance, Donner Electric Guitar Amplifier 10 Watt Classical Guitar AMP DEA‌-1 we talked about is twice as cheap as Roland CUBE‌-10GX 10W 1×8 Guitar Combo Amp. While price often is a good guideline to which model is better you should always keep in mind that more famous brands will have more expensive models even in the cheap sections. Apart from that, keep in mind that an amp having a lot of great features and effects does not mean it’s good.  
One of modern metal's key figures, Dimebag Darrell founded Pantera with his brother, drummer Vinnie Paul Abbott – forging a style that combined brutally precise, punk-honed grooves with splatter-paint melodic runs. After he was tragically shot by a deranged fan during a show with his band Damageplan in 2004 – on the anniversary of John Lennon's death, freakishly enough – the tributes rolled in from fans, peers and forerunners. "One of the greatest musicians to grace our world," Black Sabbath's Geezer Butler said simply. "Rest in peace."
If you never intend to do octave high vibrato bar stuff or play music in the style of bands like PANTERA (hard, fast metal, with lots of high note bending leads), or Jimi Hendrix (psychedelic rock), then exclude any floating or fancy bridge (also called a tailpiece). Non-floating tail pieces are usually more stable (keeping tune and intonation) and cheaper to buy.
New from Stewart-MacDonald are guitar wiring kits with the premium brand pots, switches, jacks, capacitors and cloth wiring used in original Gibson Les Paul and SG guitars. The kits make it easy to order top-quality components for wiring or re-wiring a 4-control / 2-pickup guitar with a 3-way switch. The kit components include Switchcraft toggle […]
Ovation’s first solidbody bass guitars were the 1261 Magnum I and 1262 Magnum II, introduced in 1977, as well. While not as exotic as the Breadwinner/Deacon, the mahogany Magnums had an elongated offset double cutaway design that basically had nothing to do with Fender. Surprised? The upper horn was a bit more extended than a Breadwinner and the upper edge had a slight waist. The lower bout cutout was not as dramatic as the guitar equivalent. Both basses had bolt-on mahogany necks reinforced by three strips of carbon graphite to eliminate warping, a wide strip in the center of the back and two more underneath the fingerboard. Fingerboards were unbound ebony with 20 frets and dot inlays. Both basses had a cast metal housing with two pickups, a small split double-coil unit at the bridge and a large square four-coil unit at the neck, this latter with little screw-adjusted trim pots for micro adjusting volume. The bridge/tailpiece was a heavy-duty plastic housing with heavy adjustable saddles. In front of the bridge was a lever-triggered mute. The primary difference between the I and II was in the electronics. The Magnum I had a three-way select with two volume and two tone controls. It also had two jacks allowing either mono or stereo output. The Magnum II had the three-way plus a master volume and an active three-band graphic equalizer, mono output only.
In general, this measurement is taken by measuring the distance between the bottom of the string and the top of the 6th fret while holding the string down at the 12th fret and the first fret. This is where the capo comes in handy - put it on the first fret so your hand is free to take the measurement. Using a feeler gauge of the desired height, in this example, 0.010, hold the low E string down at the 12th fret (with the capo on the first fret), and measure the distance between the top of the 6th fret and the bottom of the low E string. If the distance is greater than the desired relief, then you need to turn the truss rod clockwise (towards your right) as you're looking down the headstock towards the body of the guitar. If the distance is less than the desired amount, then you need to turn the truss rod counter-clockwise (towards your left) as you're looking down the headstock towards the body of the guitar. The basic rule is:
The size and shape of the ME-80 is comparable to the Line 6 POD HD500X, though the Boss measures a few inches smaller, and also weighs a few lbs less. This is a Boss product, and as such it’s built like a tank. No worries whatsoever over the build quality of the chassis, knobs, and footswitches. Starting with the rear of the ME-80, you can see the I/O is pretty basic - mono input for your guitar, stereo output, a headphones jack, AUX in (so you can plug in your iPhone and jam along to your favorite tracks), and a USB port. Like the Zoom G3X and the Line 6 POD HD500X, you can use the Boss ME-80 as a USB interface for your computer and record your guitar straight into your favorite DAW. Oh and one small inconvenience is that you’ll need to buy the power supply separately. Why Boss doesn’t just include one for a unit of this quality and price, we don't really understand. If you do end up getting the ME-80, this is the power adapter you want. It can also use 6 AA batteries which is good if you need to use this on-the-go, but we don’t recommend it as it will suck those batteries dry in no time.
I'm having a few buddies over to jam this coming Sunday. I don't have a full drum kit setup at my house, so our drummer will be using djembes, bongos, etc. To make things a little more manageable I'm telling folks to bring their electric guitars and NO effects. I have a small arsenal of 15-watt tube amps, so the idea is that we'll all just play into low-wattage tube amps at low volume and see what we come up with.
Over a decade after putting down the guitar I was inspired to take it up again. I got this bundle since it includes all the essentials. HOLY COW!!! WHAT A GREAT DEAL THIS BUNDLE IS!!! First, the guitar itself is a beautiful, quality instrument. It's a solid top guitar with good sound, and a comfortable action and neck. It was easy to tune and is a tremedous value for an "entry level" guitar. Second, the case. There are better cases available but there are certainly alot of worse cases out there. Bottom line on the case, it's a $90 case by itself and you get it for less than $40 here. A great value if you ask me. Third, the tuner. It works, it's easy to use, that's all you really need right? Everything else is good.

Archives of the best free VST plugins (electric guitar and acoustic guitar plug-ins) for download. We have created audio / video demos for the most of VST plugins so that you can hear how they sound before you decide to download them. You don't have to register for download. The most of VST plugins in our archives are provided with a link to VST plugin developer so that you can donate to the author if you wish.

Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.
Unfortunately there are a few who are not too happy with with some of the default patches, they caution that the PODHD500X is not a plug-and-play unit. While you can get good tones with a bit of tweaking, you can get even better tones with more experience, so the learning curve can be a bit steep for some. For best results, you ought to research the actual gear that your favorite musicians use, along with their settings and use them as your starting points to creating your own tones. Thankfully, there are user made presets that you can also use as base for your own virtual signal chain.
This guitar also features Epiphone’s patented Locktone Tune-O-Matic Bridge and stop bar tailpiece for serving the easiest string changes and increased sustain. It comes with master volume and master tone controls along with the long-lasting 3-way pickup selector for a bold and controllable performance. The most exclusive feature added by Epiphone is that by pushing a button you can mute all the outputs to add more rock and roll to your performance.
Listen, I realize I’m recommending a lot of Yamahas here, but I swear they are just that good when it comes to QUALITY and PRICE. I don’t know why that is, but it’s something a lot of guitar players have discovered. They’re just really good and very affordable. You’ll find a lot of guitars that are better, but they will cost you. I’m recommending every single guitar here for a reason. Keep that in mind.
The amps have a simple control set on the front panel: all versions have Gain, Tone and Volume controls except for MV50 Clean, which has Treble, Bass, and Volume. Also on the front panel is a small "VU" meter, and a 1/4" input jack. On the rear panel are a 1/4" speaker output jack, and a 1/4" headphones/line out jack. The amp includes cabinet simulation at the line out jack, and can thus be used as a DI to go straight into a mixer or recorder. There is also an EQ switch to select between "Deep" and "Flat." The Deep setting is intended for use with smaller cabinets where mids and highs tend to overwhelm the low frequencies, and Flat is designed to allow the amp to work with larger cabinets where the lower frequencies are more naturally present. Also present on the rear panel is the DC19V in jack, and the ECO on-off, standby-on, and Impedance switches with the following two exceptions: MV50 Clean has no Impedance Switch but instead has an Attenuator switch allowing the choice of either full power out, 1/10th power out, or 1/100th power out, and MV50 High Gain, which has no Impedance Switch but instead has a Mid Ctrl "minus/Norm/plus" switch allowing boost or cut of the amp's mid range.
I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.
The name has a long and involved history that is interwoven with that of the resonator guitar. Originally coined by the Dopyera brothers when they formed the Dobro Manufacturing Company, in time it came to commonly mean a resonator guitar, or specifically one with a single inverted resonator. This particular design was introduced by the Dopyeras’ new company, in competition to the already patented Tricone and biscuit designs owned and produced by the National String Instrument Corporation.
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]
Two full steps down from normal tuning. Used by bands such as Queens of the Stone Age, Kyuss, Sleep, Spiritual Beggars, In Flames (until Clayman), The Black Dahlia Murder, Asking Alexandria on Reckless and Relentless, Bring Me The Horizon, Architects, First Signs of Frost, Dismember, Dethklok, Immolation, High on Fire, Cold, Dream Theater, Arch Enemy (since the Angela Gossow era), Entombed, Amaranthe, Nails, Cataract, and The Smashing Pumpkins.

The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.

There's no wrong answer to which neck will work best for you. When people speak of rounder vs. flatter being better for chording/bending, they are referring to the radius of the fretboard, not necessarily overall neck shape. The fretboard on all guitars has a curvature across is, from the the treble to the bass side. Generally speaking, most people would agree that rounder fretboards facilitate better chording, while flatter ones facilitate better bending, but even that's not hard and fast.

Analyzing the notes you are playing plays an important role while you are performing. The built-in chromatic tuner in these pedals shows you the live feed of your notes whether they are sharp, flat or dead. Similarly, one can bypass the currently selected sound fx for maintaining a pure sound when tuning or completely mute the signal for a uniform silence.

Each option has a unique tonal quality, some may not seem all that useful in some situations.  2 adjacent pickups that are out of phase, can sound very tinny and weak but often cut through better in the mix as they occupy a different placement in the spectrum.  Consider Brian May's (Queen) tone as some of his selections rely on 2 single coil pickups being out of phase

Measure the height of the strings at the twelfth fret. For most playing styles, the height between the bottom of the low "E" string and the top of the twelfth fret should be a hair over 2/32". The High "E" string should be set at 2/32". The other strings should gradually flow between these measurements. This is where I would start, but the player's style (particularly their right-hand attack), as well as string gauge, scale length and individual neck nuances may necessitate deviation from these numbers.
Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
Another factor to consider is the frequency with which you play. If you’re an occasional guitarist who plays just a few times a month and tend to play with a light touch, you may find less expensive strings perfectly suitable. On the other hand, if you’re devout about practice or play often and hard, premium-grade, heavy-duty strings may prove a better buy in the long run. Many manufacturers grade their strings according to their durability.

You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.

Boogex is a guitar amplifier plug-in with a variety of sound shaping features.  With Boogex it is possible to get heavy distorted sound as well as slight distortion sound.  Boogex is also able to apply any speaker cabinet impulse response (selection of built-in impulses is available).  Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).  Boogex comes with several example factory presets.

At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.

Growing popularity of the guitar in the early 1900s, fueled by the growing popularity of folk music and country and western music, led to a demand for louder and more percussive guitars. In response, many companies began to use metal strings instead of catgut. These became known as steel-string guitars. By 1921, Martin had focused production towards this type of guitar.
There are many answers to your question like Jakedog mentioned. As far as finding a neck that is easy to play on, you'd be wise to go to a guitar shop and grab several different models of various brands and find what fits in your hand, yet allows full control over the fretting with your fingers. Smaller hands seem to like soft v shaped necks, yet I know several people with stubby little claws who play only boat necks...meaning huge round chuncky necks. I'm referring to the back of the neck in this case. 

12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.

The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth [to] heavy distorted tones".[27] The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz.
Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.
Since this guitar is from Taylor it benefits from the company's quality consistency, which applies to all their instruments regardless of price points. While aesthetics and materials are more affordable, it gets the same level of attention to detail and quality as the more premium models. This gives budget limited players the chance to have a true Taylor acoustic that plays like a "dream", and not a watered down version that plays and feels different.
The full-size electric guitars we tested are the Epiphone Les Paul SL, Ibanez GRGA120 Gio, Indio 66 Classic, Indio Retro DLX Quilted Maple, Jackson JS11 Dinky, Squier by Fender Affinity Series Jazzmaster, Squier by Fender HSS Bullet Strat, and Yamaha Pacifica PAC012. The short-scale guitars we tested are the Epiphone Les Paul Express, Ibanez GRGM21 Mikro, Jackson Dinky Minion JS1X, Jackson Rhoads Minion JS1X, and Squier by Fender Mini Strat.
{"product":{"id":"114572014","stock":"instock","price":"239.99","name":"S421 S Series Solid Body Electric Guitar","download":false,"sku_id":"114572014","checksum":"159269514523","rep_id":"site5114572014","displayId":"114572014","sku_display_id":"114572014","sku_rep_id":"site5114572014","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
The very first production electric guitar was the Stromberg Electro, developed by Hank Kuhrmeyer and introduced in 1928. It was pretty much a kludge. It was an acoustic guitar with a magnetic pickup fitted to the soundboard... Stromberg/Kay Instruments made a resonator version of this, too. The weight of the pickup, though, destroyed the guitar's soundboard over time.
The Yeah Yeah Yeahs’ theatrically coiffed guitarist has several grueling jobs, among them holding down the trio’s entire melodic structure and holding his own against one of the most dynamic frontwomen of our time. His signature see-saw call-and-response lines leave plenty of room for tension and release, war cries, and tears, and the kind of grand, clanging chords that’ll turpentine your ears clean.
Strongly influenced by Stevie Ray Vaughn, Albert King, and Johnny Winter, Garrett is also a longtime fan of Lynyrd Skynyrd’s Allen Collins. Following the path that led Collins to his biting, cutting tone, Bo plays the same type of guitar as the Skynyrd legend, and gets tremendous versatility from his Gibson Firebirds. Incidentally, Winters and King are also notorious Firebird pickers. Bo says that his Firebirds (one of which is a rare collectible) allow him to go from nasty drive flavors to cleaner, Strat-like tones when he needs them.
The last guitarist to follow in Segovia's footsteps was Julian Bream and Julian Bream will be 73 years old on July 15th 2006. Miguel Llobet, Andrés Segovia and Julian Bream are the three performer personalities of the 20th century. Do not understand me wrong, we have many guitarists today that are very excellent performers, but none with such a distinct personality in their tone and style as Llobet, Segovia and Bream. In all instrumental areas, not just the guitar, there is a lack of individualism with a strong tendency to conformity. This I find very unfortunate since art (music, theatre or the pictorial arts) is a very individual and personal matter.[31]
Super nice !.... Beautiful Patina exceptional Booming sound much like the old Martin 000 or old Gibson for that matter for a fraction $ and this ONE is a really good one folks. These are a well kept secret sort of ... known for their GREAT rich mature sound. This example is in fine all-round Original condition without any of the over 60 group problematic issues- none found anywhere upon close examination, no NONE nada -- neck issues -frets ARE good - tuners ARE good - bridge IS good - Solid Top is without a crack it s wood is FREE of cracks, Back is OK no buckle rash , no buldge to its Spruce top, The bridge is tight and NEW MARTIN STRINGS and just JVGuitars Set up this baby plays and sounds amazing at this price point unbelievable! Made in Japan quality with a beautifully grained high grade Mahogany medium soft V NECK feels like an old Martin too ....looks at the neck grain they used a beautiful Honduran mahogany not African or other this one is cool See the Pics of that ...its original Tortious pickguard is nice too..... nearly 40 years old its amazing but she's not new or mint of course she has a few minor doinks and plenty of that natural vintage patina and such but overall she's JVG condition rated at vintage excellent used condition rated. She Plays with easily and will bring a warm smile to your face when playing GREAT TONE fingerpicking rich and punchy its a very fun guitar to play... she's over 45 years old and in this kind of condition..... you better snap this gem up before she's gone or I change my mine and keep her for myself...haha this is my business I need to sell but you get my point its a good one folks. This is one amongst several of the FG150's Red Label Nippon Gakki's we have and I call it ( # 3 ) Contact Joe by email to BUY it:
In 1966, Teisco guitars shed some of its adolescent awkwardness of the early ’60s in favor of a svelter, hipper look. While some of the tubby bodies and monkey grips remained, they were joined by leaner shapes, thin, pointed, flared cutaways and German carve contours. In many ways, the ’66 Teisco line is the quintessential year for Teisco, which is fitting since it would be the last under the original ownership.
In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
Adding to their already good value, most multi-effects come with built-in features that are essential to gigging and practicing, first of which is a built-in tuner. Looping is also a good feature to look for, thankfully it now comes standard for most units. Having the ability to record straight to a computer is another handy features that should be considered, as well as the ability to edit the settings via your computer or mobile device. Built-in metronome/rhythm is also a nice plus, especially for those who want to take their skill to the next level.

Amazing guitar for the price. Honestly plays almost as good as the Paul Reed Smith I used to have. Light weight, great sustain, built in tuner and the pick ups produce a great sound. I was shocked at how good the guitar was... HOWEVER - the amp is total crap. It cracks and pops... my suggestion is to buy the guitar by itself and spend the $100 you save on a real amp (many starters that are superior to this one are the around that price.

When I received this Epiphone LP Special II Les Paul Electric Guitar, Vintage Sunburst I discovered there are cracks in the wooden body, under the paint. I can tell that the wood was cracked before it was painted because the paint flows into the crack in one instance on the back, is visible up over the "shoulder" close to the strap peg and can be seen under the paint on the front. In another instance the paint bridges a crack on back below the cutout shoulder and can be seen under the paint in the right light front and back. Is this normal? (There was no sign of shipping damage on either the outer carton or on the inner product box). Regarding playing, the bass strings buzz on the frets when fretted (not my fingers) which probably can be corrected by adjusting the bridge. I was under the impression that Epiphone guitars were ready to use right out of the box. I have contacted Epiphone/Gibson company to advise on the cracks and the buzzing bass strings. I am concerned that the cracks may get worse, and if this is this normal for a guitar in this low price range made in china. I got a reply from Gibson Customer Service which said "We would need to see pictures, but it would be highly unusual if there actually were cracks in the wood. The set up on an instrument can shift during shipping and handling, so a new instrument may need to be set-up." I will probably return this instrument and buy one in person from a music store where I can see and try the product before buying it.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
The earliest documented performance with an electric guitar was in 1932, by guitarist and bandleader Gage Brewer. The Kansas-based musician had obtained two instruments from George Beauchamp of Los Angeles, California, and he publicized his new instruments in an article in the Wichita Beacon, October 2, 1932 and through a performance later that month.
{"pageName":"[mf] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}

In terms of precedent, one of the best known users of a parlour acoustic is Ian Anderson, frontman of eccentric British prog-rockers Jethro Tull. Here the smaller sized guitar enabled Mr Anderson to sling it off his shoulders, often mid song, to embark on a flute solo or child-scaring facial contortion marathon.  So, if that’s your goal, a parlour is the guitar for you.

: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!

What started as a simple string and pedal sales catalog has grown exponentially over the past thirty years. The early days were a time where catalogs didn't have much of a presence in the industry, but what began as a college dorm room operation grew rapidly. In 1986 we moved to a full product offering and 64-page catalog, which over the years has grown to 162 pages. Join the AMS family and get your free catalog now!
A note on right versus left when referring to the hands. Traditionally all guitarists, regardless of right or left hand dominance, were made to play a right handed guitar, most likely due to the lack of left handed instruments. To this day left handed guitarists and guitars are still fairly rare. When guitarists refer to the right hand, it can be assumed to mean the plucking hand, while the left hand is used to fret the strings.

• Why fret ends get sharp: Sometimes the end of the fret wire can become sharp or, more accurately, protrusive at the sides of a guitar’s neck. Besides being rough on the hands, this is an indicator of a trickier problem: that the fingerboard has become dry and shrunk. This means that the guitar has been kept in an environment that lacks the proper humidity. More careful storage is the ultimate answer, but using lemon oil on the fretboard also helps prevent this from happening by moisturizing the wood.
Being relatively new to the ABQ area, I've been checking out the local music shops and finding myself underwhelmed - that is until I walked into Grumpy's. Kevin is probably the last honest guy in the business. His pricing is more than fair - whether you're looking for repairs, custom builds, or gear - and he's more than willing to dispense advice or talk shop (not to mention his sense of humor). To put it succinctly; he knows his shit and doesn't blow smoke up one's ass! Sure, the shop doesn't have the "selection" that a place like GC might have, but Kevin can probably get anything you need. (Besides, what's more important - knowledgeable, down-to-earth customer service at a locally owned shop, or being ignored by douchebag wankers who came of age playing along to Miley Cyrus?!) Go to Grumpy's!

The body is very much the same, composed of a chambered basswood topped by an elegantly contoured laminate maple top - complete with the easily identifiable Gretsch style pickguard. The neck specifications also follow the Pro Jet Bigsby, with a shorter than usual 24.6" scale maple neck, 12" radius rosewood fingerboard, and 1.6875" nut width. It has a total of 22 medium jumbo frets with Neo Classic thumbnail inlays serving as fret markers. Because its not a Filter'tron pickup, the sound of this guitar will be subtly different, but apparently good enough for the many users that have rated this guitar highly and even recommend it.
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.
Note that the competition for our pick in this “simple beginner’s amp” category was much more hotly contested than our other picks in this guide. The Crush 12 just barely edged out two other amps that our panelists liked. One is the Stage Right 611800, a very loud, 40-watt amp with built-in reverb that’s a great choice for those who need a powerful amp on the cheap (although that person probably isn’t a beginner). The other is the Vox Pathfinder 10, an amp with a simple control setup that our panelists loved, but a rather bright and blaring sound that some liked and some didn’t. Both are mentioned in the competition section below.
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.
Want to know more about how to distinguish all these guitars? Until a few years ago there wasn’t a good (or any!) English language reference book for Japanese guitars of the 1960s. But my co-author on this piece, the esteemed Frank Meyers of Drowning In Guitars, has written an excellent primer on this subject which can help demystify the confusion around a lot of these guitars. You can pick up your own copy here.
Any experienced professional guitarist will tell you there’s usually a big difference between what works on the live stage and what works in the studio. Most discovered early on that the carefully honed live tone they were so proud of just didn’t work on the recorded track, for any of several reasons, or not without a lot of tweaking and readjustment, at least. The first thing you’re likely to discover is that it’s a lot harder to record satisfactory overdriven and distorted guitar sounds than it is to record clean or mildly crunchy sounds, a revelation that often goes hand-in-hand with the fact that big amps tend to be more difficult to record satisfactorily in general.
The Truetone Rock Star has a classic 1960s Fender Jaguar - inspired body with a cherry & black sunburst finish and swank natural wood grain finish neck. The headstock has an odd, but killer-looking shape, an elaborately cut pick guard and what might be the world's coolest pickup; a chrome-cased body with a shimmery red marblized pickup cover. The guitar is 100% original with no replacement parts. We  rescued this one a while back and it was rusty and did not work when first tested. We meticulously detailed and cleaned it and removed the rust. We also re-soldered a few wires inside, and this fab Japanese guitar was ready to rock again. It sold and was shipped France, and the Rock Star is pretty rare, but there are lots of cool retro Truetone / Silvertone Japanese Guitars for sale below! Scroll Down for more from our collection!
You are likely to encounter phase issues when you have the same sound hitting a microphone from two different positions. The more mics you use or the more distance is put between mic and speaker in a reflective room, the more likely this will occur. The result is an effect called “comb filtering,” which cancels out certain frequencies and emphasizes others, creating an odd sound. Part of the reason for using distant-miking techniques is to obtain some “room sound” in the tone, which is created in part by such reflections, but at times these will have an adverse affect on the focus and solidity of your guitar sound. If a distant position with just one mic is sounding considerably more thin, loose, and washy than a close mic on the same amp, move it around, experiment with other locations, and see if you can eliminate these issues through mic placement alone. Otherwise, consider using a baffle or two to shield the mic from specific reflective surfaces.
Repairing pickups. You do not have the option of repairing and salvaging the pickup beyond re soldering the coil wire. If you do this be aware you are not repairing but instead customizing. However, to repair or restore pickups start by re-magnetize the coil magnets using strong earth magnets. If you need to re-solder the coil wire, unwind the pickup tape and properly re-solder in the wire appropriately.

A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rackmount device that contains many different electronic effects. Multi-FX devices allow users to "preset" combinations of different effects, allowing musicians quick on-stage access to different effects combinations.[16] Multi-effects units typically have a range of distortion, chorus, flanger, phaser and reverb effects. The most expensive multi-effects units may also have looper functions. Pedal-style multieffects range from fairly inexpensive stompboxes that contain two pedals and a few knobs to control the effects to large, expensive floor units with many pedals and knobs. Rackmounted multieffects units are typically mounted in a rack. Guitarists and bassists may mount their rackmounted multieffects unit in the same rack with their preamplifier and power amplifier.
Little Martin: Designed around a modified O-14 fret body, the Little Martin series is built at a smaller 23″ scale length. With the exception of the LX1 and LX1E, which both have solid Sitka spruce tops, Little Martin series guitars are constructed with HPL top, back, and sides. Recent models incorporate a greater amount of synthetic materials, such as Stratabondnecks and Micarta (as opposed to rosewood or morado) fretboards and bridges. The guitars employ Modified X-Series “X” bracing, reinforced by a bowtie plate made of graphite. Little Martin series guitars do not havepickguards or fretboard inlays.

Popular condensers: when it comes to condenser mics for guitar-cab miking, the AKG C414 (in its various flavours — the C414 B-ULS is pictured above left) and the Neumann U87 (centre) are both popular choices. Some producers also frequently look to the U87's predecessors, the U47 valve (pictured) and FET models, and the U67.The characteristics that producers most often seem to be looking for in these mics are their extended frequency response, especially at the low end, and the slightly softer, more diffuse sound imparted by the large diaphragm. These mics also tend to boost the 5-15kHz region, but this boost is rapidly lost as you move off-axis (it is inherently difficult to design a large-diaphragm capsule with an even off-axis frequency response).
While the general purpose is to emulate classic "warm-tube" sounds, distortion pedals such as the ones in this list can be distinguished from overdrive pedals in that the intent is to provide players with instant access to the sound of a high-gain Marshall amplifier such as the JCM800 pushed past the point of tonal breakup and into the range of tonal distortion known to electric guitarists as "saturated gain." Although most distortion devices use solid-state circuitry, some "tube distortion" pedals are designed with preamplifier vacuum tubes. In some cases, tube distortion pedals use power tubes or a preamp tube used as a power tube driving a built-in "dummy load." Distortion pedals designed specifically for bass guitar are also available. Some distortion pedals include:
Make sure to sit down and strum the notes when trying out a guitar. It should not be hard to push down the strings with your fretting hand, even if you are just starting out. The action should be as low as possible to make learning easy. Make sure to check for loose parts; there should be no rattling noises coming from the inside of the guide or inside of the neck. Also take a business card and run it along the bottom of the bridge to make sure that the bridge isn't coming off. An electronic system is not a big deal when buying an acoustic because it's relatively easy to add an electronic pickup component later on should you decide you need one.
Looks awesome. Great tone. Had A LOT of fret buzz out of the box (EADG strings from 7th-11th fret). Got it set up to try to eliminate buzzing...only way the guitar tech could seem to get rid of it was by raising the action quite a bit, so now it's much higher than I like...bummer. No buzzing and sounds great, but the playability is definitely not what I was hoping for considering the price.
Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.
Dimebag Darrell first discovered this guitar master while he was working in a club in Colleen, Texas. King was 17 and Darrell was 15. "They played and blew me away," King says. So he asked if the aspiring guitar legend needed help breaking down his guitar. It was the beginning of a working friendship that lasted until Dime's untimely death in 2004. Learning from another guitar master, Walt Treichler of Rotting Corpse, is what put this guy at the top of the extended family's list for repair answers. He also studied with Floyd Rose at a guitar show, learning everything there is to know about the Floyd Rose tremolo. "There's nothing better than the original thing Floyd came up with," he says. King is the kind of guitar doctor who makes house calls; but he's not accepting any new clients unless you're part of his extended family of musicians. "If I know 'em, and they need work on their guitar, I'll help 'em out."
1961 is the sweet spot for Fender Strats IMO: the best 3-tone sunburst and tone! My 1961 Strat has been called one of the best sounding vintage Strats by Scott Freilich of Top Shelf Music, who has been working on vintage guitars since 1968. This Strat is the closest thing to that incredible Strat; this is a very rare opportunity for anyone looking for the classic vintage Strat tone without equal!
By the way, I’d like to also take this opportunity to thank collector and one of VG’s earliest subscribers Jim Dulfer for invaluable help in an ongoing research effort, providing access to his truly impressive paper collection and photographs of some of his instruments. These catalogs are filling in many, many holes in information. You will be reaping the benefits in upcoming “Different Strummer” columns in both information and illustrations, as well as in upcoming book project. Thanks to Jim from guitar fans everywhere!
The semi-hollow guitar is based on having a “tone block” that runs down the center of the body of the instrument.  This reduces feedback issues while still maintaining the woody tone of the true hollow body instruments that are widely used in Jazz.  This allowed the pickups to be mounted to a solid block, while the outer portions of the instrument are hollow, which are often adorned with “f-holes” much like instruments of the Violin family.  This type of build provides the resonance and tone of fully hollow instruments, while providing a resistance to feedback that allows the guitar and amplifiers to be used at a higher volume.
With the development of rock, the Tele inspired and sustained yet another genre. Keith Richards of the Rolling Stones has composed many classic riffs on his battered “Micawber” Tele. Iconic are also worn-off green and respectively white Telecasters of the two frontmen of Status Quo, Francis Rossi and Rick Parfitt. Another signature Telecaster player is Andy Summersof The Police. Jimmy Page used a psychedelic-colored 1958 Telecaster, (painted by Page himself, and also known as the “Dragon Telecaster”) on the first Led Zeppelin albums, and also for the lead solo in the 1971 song “Stairway to Heaven“. The guitar had been given to Page by his friend Jeff Beck,[7] who had also been using the Telecaster with The Yardbirds. Bruce Springsteen used a custom Telecaster (with an Esquire neck) off and on throughout his career, both solo and with the E Street Band. David Knopfler, rhythm guitarist from Dire Straitsplayed a sunburst custom Fender Telecaster with white ribboning when with the band.
Dimebag Darrell first discovered this guitar master while he was working in a club in Colleen, Texas. King was 17 and Darrell was 15. "They played and blew me away," King says. So he asked if the aspiring guitar legend needed help breaking down his guitar. It was the beginning of a working friendship that lasted until Dime's untimely death in 2004. Learning from another guitar master, Walt Treichler of Rotting Corpse, is what put this guy at the top of the extended family's list for repair answers. He also studied with Floyd Rose at a guitar show, learning everything there is to know about the Floyd Rose tremolo. "There's nothing better than the original thing Floyd came up with," he says. King is the kind of guitar doctor who makes house calls; but he's not accepting any new clients unless you're part of his extended family of musicians. "If I know 'em, and they need work on their guitar, I'll help 'em out."
A modern popular rock artist known for use of the Super Beatle is Tom Petty and the Heartbreakers, although in the April 2008 issue of Premier Guitar, lead guitarist Mike Campbell revealed that the Super Beatle backline was, on their thirtieth anniversary tour at least, primarily used only as a stage prop, though Petty used his "on a couple of songs." In the group's early days, the Vox equipment was chosen because it was relatively inexpensive in 1976, yet had a handsome appearance. A photograph included in the article showed Campbell's guitar sound was coming from other amplifiers hidden behind the large Super Beatles, which Campbell stated were "a tweed Fender Deluxe and a blackface Fender Princeton together behind the Super Beatle, and an isolated Vox AC30 that I have backstage in a box."
Guitars. Having all your guitars set up properly is an obvious essential for dialing in good tone. I like low-ish action, and for low action to work, I need to set my guitar necks to have just a bit of relief so the strings won’t buzz and rattle, and in turn choke the tone. I’m always checking the neck relief on my guitars and adjusting the truss rod accordingly.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.

went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back.

Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 

These Gibson Les Paul Reissue guitars simply perform better than those made the year after or the year before. Gibson is aware of this and has been for quite some time. That's why they've decided to push out a series of Les Pauls which aimed to match the ones from 1959. Are they equally as good? Probably not since the old ones are legendary, but they're as close as you'll get for a brand new guitar.

If you are a first time builder or an experienced professional you know the value of building your instrument on a solid foundation. The Custom Shop Jag body is beautiful, high quality and made to spec. The Allparts neck is manufactured under license by Fender. The materials and quality level meet the standards set by Fender. Using these high quality materials will give you the sweet tone and sustain you are looking for.
Orville Gibson patented a single-piece mandolin design in 1898 that was more durable than other mandolins and could be manufactured in volume.[10] Orville Gibson began to sell his instruments in 1894 out of a one-room workshop in Kalamazoo, Michigan. In 1902, the Gibson Mandolin-Guitar Mfg. Co. Ltd. was incorporated to market the instruments. Initially, the company produced only Orville Gibson's original designs.[11] Orville died in 1918 of endocarditis (inflammation of the inside lining of the heart chambers and valves).[10]
Just SOLD OUT sorry.... Another FRESH Release from the JVG Vintage Vault: Hey Mandolin lovers here we are proud to present a wonderful vintage 40 year old beautiful sounding and is absolutely gorgeous !!! She has chop too well preserved and well taken care of this is the more rare of the Japanese mando's you do see a lot more Aria's & Alvarez but less Ibanez lawsuit version of the famously popular Gibson F5 mando. Excellent workmanship and it's the solid spruce carved example she's in very good - excellent vintage condition with just a few blemishes and yet nothing to detract from its undeniable beauty. This beauty comes with its original hard shell case it's rectangular black tolex with brilliant plugs marigold lining, open its cas and wow she's really striking .... This Iis a rare one folks a must for the ibanez mando fan... Contact Joe:
Here's another guitar many people feel is a great value. This Pacifica features an agathis body, maple neck, and rosewood fretboard, with two single coil pickups, and one humbucker. The consensus is the guitar is reasonably well made, and the quality of the wood tends to be high. Those who go on to become serious guitarists might want to consider upgrading the electronics of the Pacifica HSS.

Here, the brighter/lower-value cap is engaged when the pot’s all the way up. As you roll it back, the larger cap is introduced, producing greater capacitance and a deeper treble cut. When you arrange caps in parallel, their total capacitance is the sum of their values. For example, I tried a .0047µF cap and a .047µF, so the minimum value is .0047µF (a very modest cut) and the maximum is approximately .052µF (a very dark tone).

In 1951, this initial rejection became a design collaboration between the Gibson Guitar Corporation and Les Paul. It was agreed that the new Les Paul guitar was to be an expensive, well-made instrument in Gibson’s tradition.[10] Although recollections differ regarding who contributed what to the Les Paul design, it was far from a market replica of Fender models. Founded in 1902, Gibson began offering electric hollow-body guitars in the 1930s, such as the ES-150; at minimum, these hollow-body electric models provided a set of basic design cues for the new Gibson solid-body, including a more traditionally curved body shape than offered by competitor Fender, and a glued-in (“set-in“) neck, in contrast to Fender’s bolt-on neck
Hi Ri - Squier Affinity Stratocasters and Telecasters come in lefty designs. Unfortunately they are a bit more than $100. There are some guitars in that price range but unfortunately I don't have a lot of experience with them. I would tread carefully at that price point, as really cheap guitars often end up being more trouble that they're worth. Good luck, whatever you decide!

A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rackmount device that contains many different electronic effects. Multi-FX devices allow users to "preset" combinations of different effects, allowing musicians quick on-stage access to different effects combinations.[16] Multi-effects units typically have a range of distortion, chorus, flanger, phaser and reverb effects. The most expensive multi-effects units may also have looper functions. Pedal-style multieffects range from fairly inexpensive stompboxes that contain two pedals and a few knobs to control the effects to large, expensive floor units with many pedals and knobs. Rackmounted multieffects units are typically mounted in a rack. Guitarists and bassists may mount their rackmounted multieffects unit in the same rack with their preamplifier and power amplifier.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.
Distortion was not an effect originally intended by amplifier manufacturers, but could often easily be achieved by "overdriving" the power supply in early tube amplifiers. In the 1950s, guitarists began deliberately increasing gain beyond its intended levels to achieve "warm" distorted sounds.[29] Among the first musicians to experiment with distortion were Willie Johnson of Howlin' Wolf,[29] Goree Carter,[30] Joe Hill Louis,[31][32] Ike Turner,[33] Guitar Slim,[34] and Chuck Berry.[35]
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
{"pageName":"[mf] pdp: el dorado vintage handtooled leather guitar strap","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";361014","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.

Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
Squier model Telecasters are sold by Squier, a Fender-owned import brand. These can bear the Telecaster name, since Squier is owned by Fender. Squier guitars, especially the Telecasters, have gained popularity[citation needed] and a good reputation amongst guitar players,since it has expanded its production of guitar models.For example a 1989 Korean Squier Telecaster made in the Samick factory could be considered tonally superior[citation needed] to a modern American produced guitar besides necks being more comfortable in general.Template:Citation neede Squier has a wide range of different Telecaster type guitars available, from the entry-level Affinity Series to the better quality Standard and Classic Vibe Series. However, Standards are often used by beginners. Also available are the Artist Series and Vintage Modified Series. Among other famous musicians, Sheryl Crow has occasionally used a Squier Telecaster for recordings and live performances.[4][dead link]
I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.
Specs for combos were as follows: Checkmate 10 (6 watts, 6″ speaker, two inputs, striped grillcloth); Checkmate 12 (9 watts, 8″ speaker, three inputs); Checkmate 14 (14 watts, 8″ speaker, three inputs, tremolo); Checkmate 17 (20 watts, 10″ speaker, tremolo, reverb); Checkmate 16 bass amp (20 watts, 10″ speaker, volume, tone); Checkmate 17 (20 watts, 10″ speaker, reverb, tremolo); Checkmate 18 (30 watts, two 10″ speakers, reverb, tremolo); and Checkmate 20 (40 watts, 12″ speaker, reverb, tremolo). Piggyback amps included the Checkmate 25 (50 watts, 15″ speaker, reverb, tremolo); Checkmate 50 (two-channels, 100 watts, two 15″ speakers, reverb, tremolo, “E tuner”); Checkmate 100C (two channels, voice input, 200 watts, two 15″ speakers, reverb, tremolo); and the big hugger-mugger Checkmate Infinite (200 watts, two 15″ speakers, stereo/mono preamp section, reverb, tremolo and a bunch of other switches). The one shown in the catalog actually has a block Teisco logo and carried the Japanese-marketed name – King – in the lower corner.
: : I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
Most people think of Roy Orbison as the super-smooth crooner who sang songs like “Crying,” “In Dreams” and “Only the Lonely.” But Orbison was also a wicked guitar player, who ripped out several impressive solos on early Sun Records singles like “Ooby Dooby.” In fact, Sun owner Sam Phillips was more impressed with Orbison’s guitar playing than his singing during the early days of the rocker’s career.

Amplifier heads are the standalone electronic components of an amp stack. A head unit is designed to be used with external speakers, and is usually much more powerful than the head section built into a combo amp. There are two main sections to the head unit: the preamp and the power amp. These circuits are one of the most important considerations when choosing your combo amp or head, because this is where tubes come into play. Check out the latest Fender Bassbreaker Amplifiers. They offer modern appointments while maintaining the vintage Fender sound. 
{ "thumbImageID": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White/K29653000001000", "defaultDisplayName": "Fender Mustang PJ Bass Pau Ferro Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000055415", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White-1500000055415.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White/K29653000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Blue", "sku": "sku:site51500000055422", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Sonic-Blue-1500000055422.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Sonic-Blue/K29653000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000055423", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Torino-Red-1500000055423.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Torino-Red/K29653000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.
Open the case and you will find over 689MB of rich guitar tones ranging from 70 to 130BPM. These sensational loops are neatly arranged into 3 categories comprising of 50+ Ballad Hooks, 50+ Steady Riffs and 50+ Upbeat Jams, all applicable to a vast range of genres! From the clean, delay-drenched chime of Ballad Hook 'Serene' to the upbeat overdrive of Steady Riff 'Perpetual' and the crunchy swagger of Upbeat Jam 'Loose', STUDIO GUITARS redefines quality guitar samples and delivers them in stunning 24-bit high definition.
Richard Thompson has been one of rock's most dazzling stylists since his days with Fairport Convention, a British folk-rock band that veered into English traditional music. Shooting out life-affirming riffs amid lyrics that made you want to jump off a bridge, he combined a rock flatpick attack with speedy fingerpicking. His electric-guitar solos, rooted less in blues than in Celtic music, can be breathtaking, but his acoustic picking is just as killer; no one knows how many tears have been shed by players trying to nail "1952 Vincent Black Lightning."

Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks.
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.