As an acoustic guitar player, and not a very good one at that, I'm always looking for some advantages, and by advantages I mean something that will make me sound better, not necessarily play better. So when I heard about a device that can add distortion, or reverb, or echo effects to an acoustic instrument, without needing to plug in to an external amp, I didn't believe it until I saw/heard for myself.
I recall reading about one on a thread Gary was a part of. Much ribbing going on. Consensus was that it was pretty much a junker. Now, if you can get it to play and intonate well, I'm a big fan of junkers. I'm intrigued by the ladder bracing too. Very unique sound to that. In/re the bridge, I have an old Carlos that I've been considering doing that to. It's not worth a real neck reset, and the bridge is really high. Not the saddle. The bridge is fat and quite substantial. I could take it down by at least 1mm without it being as thin as a standard Martin bridge.

So you’re thinking about building an electric guitar. Well, it’s a very rewarding experience when it’s done right, and you have the ultimate freedom to make it whatever you want. On top of that, it can be a money saving alternative to the hefty price of a good instrument, if you’re willing to invest your time. Or if you’re just planning on undertaking a fun project, it can certainly fit that bill too.


Distortion was not an effect originally intended by amplifier manufacturers, but could often easily be achieved by "overdriving" the power supply in early tube amplifiers. In the 1950s, guitarists began deliberately increasing gain beyond its intended levels to achieve "warm" distorted sounds.[29] Among the first musicians to experiment with distortion were Willie Johnson of Howlin' Wolf,[29] Goree Carter,[30] Joe Hill Louis,[31][32] Ike Turner,[33] Guitar Slim,[34] and Chuck Berry.[35]
Designed to be the greatest all-rounder, the Grand Auditorium shape was the perfect blend of size, shape, volume and comfort, and its modern-day incarnation has seen the likes of the biggest pop star on the planet these days, Taylor Swift pick one up. People forget that before mega-stardom, Taylor was a respected country artist, and it was on a Taylor Grand Auditorium that she plied her trade.

Manne guitars - This Italy based guitar manufacturer produces instruments with unique features. The first Manne guitar was built in 1986 and they continue to provide finely crafted instruments based on some very original design concepts. Manne's design philosophy: hand craft the finest stringed instruments then offer them to the public at a reasonable price.
All I can say is quit wasting $ on new. A new guitar is like a new car it’s gonna lose 20% of its value once you take it out the first time. Unless you are buying a Gibson or fender custom shop etc Just go for what plays and sounds great. Perfect example is the Esp ltd ec401vf or 400. Used $300-400 has stock seymour duncan 59 neck jb bridge or the newer 401 has the dimarzio’s in it. Grovers tuners earvana nut mahogany body. Just an excellent setup for half the price of an epi les paul. Don’t get me wrong I have an Epi les paul traditional pro and it’s a nice guitar but for $750 nah. Since I picked up the 401 I hardly play my jag mustang or either of my epi l.p. or sg. Its just that nice of a guitar. If you are in the market for a les paul style or a new guitar in general take a look at the 400 series it’s a whole lot of guitar for the $

When it comes to amplifiers that won’t break the bank, but sound loud enough to break your windows, Orange Amplification know exactly what they’re doing and they do it well! The Orange Crush 12 Solid State 12W 1X6 Combo is one of the best cheap amps in the music scene and one that can easily be used on stage and in the studio due to its legendary tone and reliability. This Orange Crush 12 Solid State 12 watt amplifier features a 6” Voice Of The World speaker custom designed by the team at Orange amplification to deliver punchy and articulate sound.


Like most things involved with creative pursuits like making music, there isn’t a steadfast right or wrong way to do things, but if you encountered any of the problems above you’re definitely doing things wrong (unless you play in a German nihilist industrial noise band, in which case, go nuts). This article will help you avoid those scenarios by describing some of the basic rules and suggestions for placing different effects in the ideal order in your rig’s signal chain and how to achieve the best possible tones when using several stomp boxes together. If you’ve ever wondered how to put together your own pedal board, this info will give you a good start toward obtaining the best sound and most versatility out of your rig.
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please
We are here today to help you break free.  It's time to understand the difference between the types of guitar strings.  We can have higher value from our brand of choice or any other by understanding which product serves our personal preferences and instruments the best.  Let’s dive in and learn about the many variables that makes certain strings better or worse for each individual player.
Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.

Gain – In simple terms, gain is the amount of power your signal is packing. There are a lot of stompboxes that come with gain boosters, which makes it easy to give your volume an instant bump when it’s time for a solo. But be careful of the creep if you add too much gain through too many pedals, or you might end up giving your amp more than it can take, which will throw your distortion out of control.
Equalizer: An equalizer is a set of linear filters that strengthen ("boost") or weaken ("cut") specific frequency regions. While basic home stereos often have equalizers for two bands, to adjust bass and treble, professional graphic equalizers offer much more targeted control over the audio frequency spectrum.[64] Audio engineers use highly sophisticated equalizers to eliminate unwanted sounds, make an instrument or voice more prominent, and enhance particular aspects of an instrument's tone.[65]

Aside from what brands to choose from and finding out the right budget to spend on an amp. Initial search for a guitar amplifier generally leads beginner players on figuring out that there are actually different types of guitar amps in the market. This is where they start to care deeply enough to know which amp sounds better and what will fit their playing the best.


DRILLING THE NECK HOLES ON THE BODY Before you do this you can carve down the back of the neck area if that is something you were going to do. If you are just going to leave it flat then that's ok too. The first step if you are using furreles is to map out where you want to place them and then mark the center of the hole where the screw will go. Then take your forstner bit drill enough to fit the furrele inside. Usually you can tell how deep to go if you drill a little at a time, and place the furrele in it to see if it is just low enough in the hole not to see the top of it if you look at the body horizontally or it is flush with the wood. After doing this you can drill the holes for the screws. Use a bit that has the same circumference as the screw including the threading so when you put the scre into the hole it just passes through with out you having to screw it in. Drill in the indention that was left by the tip of the Forstner bit, keeping the drill as straight as possible.

The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.
If you can afford to start on an amp in the sub-$200 segment, you will see an instant upgrade in the amount of power as well as additional features. In this category you are looking at very good practice rigs, although as power is still pretty low they may not be suitable for more than small casual performances. This is the first category where you will find both amp heads and tube amps, although the choice of these is very, very limited. One of the best amps you can grab for under $200 is the Marshall Code 25W. This combo provides a solid tone, 25 watts of power and plenty of amp voices and effects to play around with.
Gibson guitars are the produce of the Gibson Guitar Corporation which produces guitars and other musical instruments which sell under a variety of brand names. Gibson Guitar Corporation was founded in the year 1890 by Orville Gibson in USA. It is a mass producer of the Guitars and is the most widely used guitars in the world. Gibson guitars are exported all over the world and are considered as one of the best guitar brands in the world. Gibson Guitars actually are the giant guitar company which also owns other brands of guitars. Some of the popular brands which are owned by Gibson are Baldwin, Epiphone, Kramer, Maestro, Slingerlands etc.
VintageSilvertones.com is a curated collection of electric guitars chosen for their unique tone, design, and significance in electric guitar history from approximately 1950-1980. This collection approaches electric guitars from the underdog perspective. So we carry guitars built for the masses, luthiers & manufacturers who pushed the boundaries as to what was possible in terms of not only instrument quality but tone. Design also plays an important consideration in this collection. Alternative materials, innovative tuning systems, and high quality-low cost manufacturing processes are only some of the unique qualities found on instruments at VintageSilvertones.com.
Here you get a very bright sound but the output will be less than if it were wired in series and you no longer have hum canceling. Since you are using just one half of the humbucker, "coil-cut" sounds best when using a high output pickup (DiMarzio "X2N", DiMarzio "Distortion", Seymour Duncan "Invader", Seymour Duncan "Distortion", etc). A coil cut switch is relatively easy to wire up and it is just a matter of connecting one end of an SPST switch to that junction that was created for series wiring and connecting the other end of the switch to ground. So, we now have another 2 tone humbucker arrangement that can easily be switched back and forth between 2 tone options.

8. Fender Champion 40-watt 1x12 ($179.99): If you are looking for a great introduction into the world of Fender tone, you need to look no further than the Fender Champion 40. This solid state amp with Fender classic styling allows you access to a variety of on-board effects like Vibratone, tremolo, delay and many more. The two amp channels allow you to switch between Fender Blackface clean or a variety of different amp voicings, accessing the sounds of other Fender amp greats. The ability to add a footswitch pedal allows you to switch channels and effects with great ease at the tap of a button. There’s a reason why Fender is the go-to company for many of those in the music community.

The most important thing to a 5string is the tone ring with a resonator, I've been plays 36yrs. I have an Alvarez Denver belle flat top tone ring, a White Eagle archtop tone ring and my favorite is a Hohner artist flat top tone ring. Regarding a guitar my choice is a Martin D-35 ease of play & tone that is awesome! a 5 string take Many hours & months of practice on your rolls, forward, backward alternating thumb pattern, keeping your timing in check so you do not hit the string with your middle finger out of synch. Good luck have fun, no time better to learn than now!
I commented earlier that the guitar amp is the instrument as far as the mic is concerned, but if the guitar is played in the control room with the amp itself in the studio (assuming decent separation between the rooms), a capacitor microphone close to the guitar neck may be used to capture the direct sound from the guitar strings. This sounds a bit thin and naff on its own, but sometimes works well in combination with the miked sound. A similar effect can be achieved by splitting the guitar output, feeding some of it direct to the console via a DI box and then either removing some low end or using an enhancer to exaggerate the brightness. DI'ing the piezo bridge pickups (where fitted) may also produce a similar result, and any of these techniques may also be used with guitar recording preamps as well as when miking.
1. Examples. There are a handful of examples in this book and that's about it. I expected much more in the way of alternate wiring examples but they were only mentioned in passing it seems. Additionally if you're looking for good step by step instructions you wont find it here. The instructions are average at best and never really go deeper than "put this wire here and that wire there" . It's step by step,but just barely. Don't expect any deep explanations on the theory behind why certain wirings do what they do or why they sound the way they do. It's cursory at best.
Another chord you come across every day, the E major chord is fairly straightforward to play. Make sure your first finger (holding down the first fret on the third string) is properly curled or the open second string won't ring properly. Strum all six strings. There are situations when it makes sense to reverse your second and third fingers when playing the E major chord. 
In order to trigger these notes, a MIDI guitar controller is needed. Alot of work just to recreate what you can do on a real guitar. The only advantage to this technique, is the ability to take a MIDI track, creating this way, and substitute different guitar models to audition what might sound best. Also, the MIDI guitar track can also serve as an educational tool and how a part is performed.
Gate – A dynamic effect that cuts off or lowers the volume of the output when the input is below a certain volume threshold. Once the input reaches the threshold the gate opens and allows the entire signal through. This is handy when placed in an amplifier’s effects loop for helping to eliminate hiss caused by high gain distortion when the guitarist is not playing.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.

In many ways the Fender Stratocaster is the antithesis of the Gibson Les Paul style guitar. The first thing I notice when I sit down to play a Strat style guitar is the fantastic body shape - it's just a perfect fit. The Strat typically has a scale length of 251/2 inches which is considerably more spaced out than the Gibson. While a Gibson has the warm humbucker tone, a vintage Strat tone is thin and sharp, almost cutting. To achieve this there are three single coil pick-ups with staggered coils which equalise the prominence of all the strings. The humbuckers Gibson use are basically two single coils wired parallel to cancel some of the background hum that the Strats suffer from. In doing this however they loose some of the higher frequencies which give the Strat their sharp, jangling tone. The massive Fender scratch plates were originally used to protect their pick-ups from picking up too much background buzz and they've become one of the Stratocaster's most distinctive features. The Strat also has the tremolo bar which the Gibsons lack. For the uninitiated the name 'tremolo' is a bit of a misnomer as the 'whammy' bar actually allows you to pitch bend by tilting the bridge back and stretching the strings while the 'tremolo' effect usually refers to changes in volume.
Now think about all the advances in guitar technology that we’ve witnessed over the decades—how much smarter we are now when it comes to acoustics, electronics and precision manufacturing? Sticking with this metaphor, isn’t it a bit crazy that we place such high value on the early designs that represent the Model T-era of the electric guitar’s evolution? We’re not just talking nostalgia and historic significance here—ask most guitarists to name the most amazing, best-sounding electric guitars ever made, and they’ll go all the way back to early-fifties Broadcasters, late-fifties Les Pauls, and early-sixties Stratocasters. Guitarists cling to the tones produced by what is, essentially, first generation technology.
Yamaha F-310 Acoustic Dreadnought guitar in very good-excellent used condition no cracks or issues it looks great and the neck angle is excellent as well so as a result this guitar plays well with good fingerboard action with plenty of room on the saddle to lower action even more in future years if ever needed. Frets look good at 90-% with no ruts on fingerboard noted, truss rod is working fine, nut is 1-11/16ths. Yamaha specs (all of the F310 are made like this). It has 20 frets and a slim taper neck,The top is spruce, laminated, with natural finish. The sides and back are made of Meranti Indonesian Mahogany type wood , fingerboard and bridge are made Indian Rosewood, and the neck is of Nato. It's a full dreadnought guitar style, and just looks great.this one is in exceptional used condition better than average. Sound is good with nice volume and its tone is getting mature,,nice tone. No Cracks no issues no repairs and looks to have a bone nut and saddle this helps it have such a mature natural tone, Its sounds better than other F310’s Ive played I like this guitar and its price is right. any questions or to buy this guitar contact Joe at: JVGuitars@gmail.com .
Delay pedals are among the most popular effects around, and the reason is simple: A delay pedal not only gives your sound a professional sheen and adds a three-dimensional quality—even when set for a discreet, atmospheric effect—but it can also produce a wide variety of not-so-subtle sounds and textures, ranging from ear-twisting rhythmic repeats (à la Eddie Van Halen’s “Cathedral”) to faux twin-guitar harmonies and live looping.

Since the early days of the electric guitar, blues musicians searched for different ways to overdrive their amplifier's signal. Of course, when rock'n'roll took off, the process of "distorting" a guitar tone became a lot easier thanks to new amp and pickup designs. Soon, musicians like Link Wray were making a name for themselves with the use of distortion. By the mid-60s, fuzz pedals were being used by teenage garage rockers around the world while performers like Dave Davies and Pete Townshend made distortion and overdrive a part of their signature sound. Today, distortion and overdrive effects pedals are a dime a dozen, and a quick glance at this section will make that obvious.
Hopefully, that explains the basic components and tools. As mentioned guitar electronics can be a little daunting and my best advice if new to guitar electronics is to avoid seeking out information on guitar related forums as you may leave your head spinning, feeling more daunted than you did in the first place. We will cover the basics here and in most cases that will be more than enough to help you put together a great guitar.
I also didn’t mention a tuner, but that’s because a tuner really isn’t an effect. If you use one, the ideal location is in the very front of the signal chain right after the guitar as you don’t want the signal going into the tuner processed by any effects that might affect the tuner’s accuracy. Even better, get a loop switcher with a separate tuner output that keeps the tuner entirely out of the signal chain until you need to use it and that will mute the signal so the audience doesn’t need to suffer while you make adjustments.

Before doing a setup, I’d recommend you put a new set of strings on the guitar. Specifically put the type of strings on that you intend to use in future, since different gauges (and sometimes brands) can require a slightly different intonation setup. If you don’t know how to restring a guitar, then have a look here: http://diystrat.blogspot.com/2011/08/stringing-guitar.html


Nitrocellulose lacquer is one of the great original-era Fender electric guitar finishes, and is still used today on select instruments. Thin, porous and delicate, it’s a premium finish prized for sonic qualities that let body woods breathe with their true tonal character, and for an appearance that ages and wears in a distinctive way appealing to many players.
Next up we have the specialty electric guitars. This category consists of several different types of electric guitars, but we’ll start out with 12-string electric guitars. The fact that the low E, A, D, and G strings all feature higher octave strings while the B and high e strings both have additional strings that are tuned the same, electric guitar 12-string models have a distinctive shimmer and richness to them that guitar players love. Guitar players who favor heavier genres like death metal or hard rock may want to add a 7-string, an 8-string, or even a 9-string electric guitar to their rig for when they need some extra low-end growl and power. Other specialty guitars include baritone guitars, double neck electric guitars, and pedal steel guitars & lap steel guitars.
×