-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Ultimately, be aware that the key to sounding the way you want lies in your hands and your head more than anywhere else. The way a player attacks the strings — the nuance, dynamics, and subtleties of the playing technique — usually has a bigger influence on how he or she sounds than any other single ingredient in the rig. Try to play mindfully, being keenly aware of the variations in sound produced when you simply play the guitar differently, and you will quickly develop an original voice.
Effects and effects units—stompboxes in particular—have been celebrated by pop and rock musicians in album titles, songs and band names. The Big Muff, a fuzzbox manufactured by Electro-Harmonix, is commemorated by the Depeche Mode song "Big Muff" and the Mudhoney EP Superfuzz Bigmuff. Nine Inch Nails, Pink Floyd, George Harrison, They Might Be Giants and Joy Division are among the many musicians who have referenced effects units in their music.
This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.
This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.
The old ones were SOLD as cheap guitars. These new ones, at their price points, are probably decent instruments at the very least, and possibly even very good ones. I doubt they have much in common with the Kays from the 70s aside from how they look, which as other people have detailed, is probably just for nostalgia purposes. Lots of aging rockers with fat salaries who might've learned on those guitars a few decades ago!
Examples of these first Supros can be seen in two catalogs from 1936, by Canadian distributor Peate and the Bronson Music & Sales Corporation, the latter probably originating slightly later than the Peate book. Both show laps identical to the Supro frying pan. Peate offered the Spanish guitar and mandolin. In the Bronson catalog, the Supro frying pan is known as the Bronson Singing Electric “For The Artist.” Bronson also sold electric Spanish and tenor guitars and an electric mandolin, other early Supro electrics.
What Fender might lack in heavy, modernized features, it makes up for in affordability, novelty and being some of the best all-around guitars in existence. They would also have to be considered some of the most stylistically versatile guitars, covering all kinds of musical genres and songs. We’ll focus primarily on the Standard (non-American) models, since they’re priced below our $700 cut off. If you want to go with something nicer, target the American series Strats and Teles.
Electric guitars are versatile instruments. If you’re not entirely sure where your playing career is headed, pick a Strat-style solid-bodied guitar in a ‘sensible’ colour, and you’ll have an instrument that can do pretty much anything – and one which you won’t be embarrassed to get out of its case when (and if) you get through the ‘death metal’ phase!
It depends on whether you are playing with someone, or you just wanna start to play home in your bedroom. If you play with others, you need an amp that can play loud enough to follow the bass and especially the drums. Marshall make some great tubeamps, but also Vox make some great amps, where this one on 40 watt with effects incl are real good. Sound like a tubeamp, and have a 12ax7 in the frontamp.
1950s: occasional Adirondack red spruce. In 1952 or 1953, rumor has it Martin bought a large supply of Engelmann spruce from government surplus. Though Martin preferred Adirondack Red Spruce, it was no longer available after the mid-1940s because all of the large trees had been decimated. Martin would have liked to switch from Sitka to Engelmann because he felt that Engelmann was closer to Adi Red Spruce than Sitka was. He could not however find anyone who was cutting Engelmann commercially, so they went back to Sitka.
Call of Duty: WWII Pre-order and get the Multiplayer Upgrade, includes a Weapon Unlock Token and Multiplayer 2XP* *Weapon unlock and 2XP usable in multiplayer only. 2XP limited to 4 hours of gameplay. Call of Duty® returns to its roots with Call of Duty®: WWII—a breathtaking experience that redefines World War II for a new gaming generation. Land in Normandy on D-Day and battle across Europe through iconic locations in history’s most monumental war. Experience classic Call of Duty combat, the bonds of camaraderie, and the unforgiving nature of war against a global power throwing the world into tyranny. Game Overview Call of Duty: WWII creates the definitive World War II next generation experience across three different game modes: Campaign, Multiplayer, and Co-Operative. Featuring stunning visuals, the Campaign transports players to the European theater as they engage in an all-new Call of Duty story set in iconic World War II battles. Multiplayer marks a return to original, boots-on-the ground Call of Duty gameplay. Authentic weapons and traditional run-and-gun action immerse you in a vast array of World War II–themed locations. The Co-Operative mode unleashes a new and original story in a standalone game experience full of unexpected, adrenaline-pumping moments.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too.
WIRING Lay your beautifully finished guitar on a soft towel so you don't scratch it and cover the back with a cloth as wel so you don't splatter solder on it. How you wire you guitar up depends on the layout you have chosen. Mine was a simple one tone, one volume and three way switch set up. I have gone with the Les Paul set up on other guitars which is a two tone and two volume before as well. What ever set up you go with just follow the schematic that either came with you pickups or get one from Seymour Duncan. They also have instructional videos that are done by Seymore Duncan himself on Strats and Les Pauls. I recomend watching these if its your first time wiring a guitar.
At first the company produced high-quality acoustic instruments for students and working professionals, aiming at providing good value for money and experimenting with the use of Australian woods. In the 1960s they expanded into electric instruments and instrument amplifiers, at first under the nameMagnetone. The early catalogues noted that the warranties on amplifiers and loudspeakers were void if used in situations of “overload or distortion“, reflecting Bill’s jazz background but still incredible to modern electric guitarists of any style.
Ten is not enough. If you are not here for the first time and you already checked our article on the top acoustic guitars and the recommended electric guitars you know how we roll.And if we are going to review a lot more than just 10, why not split them into proper categories that will help you choose what is working best for you. As it will take a lot of time to write all these for you, please be easy on us. For the people that do not want to waste that much time thought and just want a quick list with some great effects we prepared the comparison charted listed below:
Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.
The MC5 were the nexus where radical politics and proto-punk belligerence first came together. This dangerous mixture touched off an explosion that’s still rocking the world today. The group burst out of Detroit in the cataclysmic year of 1969, with its roots firmly planted in mid-Sixties garage rock, and mutated by injections of inner-city R&B and free-jazz mayhem.
FINISH DRILLING THE HOLES After you have shaped and carved the body and the neck holes are drilled and the cavities routed out, you can preposition all of you parts and drill the last of the holes. Start with the pickup rings. It is good to assemble them first and then drop them into the cavity so you can line them up and mark where you will need to drill. Make sure they aren't crooked when you line them up. I like to have the neck bolted on so I can line them up with it. I do the same thing with the bridge. Be sure to check that the scale length is correct and that it is lined up with the neck as well. Drill the holes for the mounting screws and then the string through holes. Try to keep the drill as straight as possible when you do this because you will be going all the way through the body and if they aren't straight you will see it on the other side. This is the time that I wish I had a drill press.
Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
Bought an ovation a couple of years ago and it hasn't failed me yet. Mine's a fairly lower in the range Ovation Celebrity, but it's excellent. One of the most comfortable feeling guitars I've ever held, good projection, nice tone, even been known to out do a Gibson further down the neck. Plus bonus feature is that it does sound so much clearer and warmer out of the amp
Many inexpensive starter guitars are built with laminate tops, made from several layers of wood pressed together. While laminate is durable and can be quite attractive, it will not produce as pleasing tones as solid wood. To a lesser extent, this is also true of the guitar’s back and sides—solid woods will produce better tone. When reading guitar specs, if you see terms such as “select spruce top,” that indicates the top is made of laminated woods with a spruce-like grain pattern imprinted on it.
If you just want one or two instruments from a large SoundFont then follow this procedure. Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont. Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont). Right-Click on the main heading of the original SoundFont and choose Close File. Now simply choose File, Save (or Save As), Close.
My father's Yamaha was bought in the 90's, and was the first guitar steel-string I ever played as a kid. (If you were curious its equivalent to today's model would be the LS6 ARE). To this day I still find myself going back to it. It's little quirks makes it really special, even though I have martins and taylors and even gibsons. There's little nicks and chips in the paint in some places, which really shows it's history. It's also stood the test of time. It still plays great after almost 30 years of being lugged around from place to place, dropped, hit against walls, etc. It's just simply great. - zabathy1
The original Fender Mustang is something of a cult classic. It was loved by alternative bands and players - including Kurt Cobain - in the '90s for its short scale, affordability and potential for modding. The Bullet Mustang is the most affordable version of the model yet. In keeping with Squier’s other entry-level models, it features a basswood body, which gives it an incredibly lithe, lightweight feel. This, combined with its 24-inch scale length, makes it a great choice for beginners. The two humbuckers are the most obvious departure from the original, providing angular grit in the bridge position and a pleasing, earthy warmth in the neck. The bolt-on maple neck and six saddle hardtail bridge feel reassuringly rigid, while the tuners did a sterling job in our tests of holding their pitch without too much hassle. The volume and tone knobs, often a clear indicator of quality control in budget guitars, are installed firmly enough with no evident wobble, while the pickup selector switch is angled so it won’t get knocked if your playing becomes too... ahem... enthusiastic. Meanwhile, the 12-inch radius, rosewood ’board is pancake flat and makes string bends simple for even the most sausage-fingered player. The C profile neck is also extremely comfortable to hold, while the satin finish makes fretboard-spanning licks a doddle. $149/£120 is practically peanuts to spend on a new guitar. For Squier to cram in the features it has, with the overall levels of build quality on display, is seriously impressive.
So I got this kit last week full of hope yet penssive knowing that these kits from over seas have lots of problems. On first inspection the kit was okay, Nothing, I thought at the time, a little TLC couldn't fix. Here I am getting ready to install the electronic today, level the frets, string it in and play. As I opened the pakage with all of the tone and volume pots I noticed one thing super wrong right away.
Guild is the most underrated American premium guitar brand. Almost as good as a Martin & way better than most Gibsons, Guilds are typified by clear, crisp, even tone. While lacking the full bass & tinkly top end of a Martin, the evenness of tone is a selling point for many artists, along with the clarity. The maple models are especially bright & brassy in tone, making Guild a popular brand among rock stars in the 70s, their heydey, when some of the finest American guitars came out of their West Waverly Rhode Island plant. Top-end Guild acoustics are graced with an ebony fretboard more typically found on jazz models, slightly curved and beautifully inlaid with abalone fret markers. The Guild jumbo 12-string has been an especially prized instrument, and was for many years considered the best mass produced American 12 string available.
While jazz can be played on any type of guitar, from an acoustic instrument to a solid-bodied electric guitar such as a Fender Stratocaster, the full-depth archtop guitar has become known as the prototypical "jazz guitar." Archtop guitars are steel-string acoustic guitars with a big soundbox, arched top, violin-style f-holes, a "floating bridge" and magnetic or piezoelectric pickups. Early makers of jazz guitars included Gibson, Epiphone, D'Angelico and Stromberg. The electric guitar is plugged into a guitar amplifier to make it sound loud enough for performance. Guitar amplifiers have equalizer controls that allow the guitarist to change the tone of the instrument, by emphasizing or de-emphasizing certain frequency bands. The use of reverb effects, which are often included in guitar amplifiers, has long been part of the jazz guitar sound. Particularly since the 1970s jazz fusion era, some jazz guitarists have also used effects pedals such as overdrive pedals, chorus pedals and wah pedals.
The Cordoba C7 spruce-top has a natural finish, complete with rosewood back, sides, fretboard and bridge, and the traditional looking inlay that Cordoba is known for. Plus, there are the Savarez Cristal Corum high-tension strings that come with it, which give the guitar its clear, clean sound. Of course, you might want to change to another set of nylon strings, should you wish it, depending on the sound you truly want.
Masacre takes a great deal of my time, but in normal days I am also a guitar teacher in my hometown, Medellin. I counsel young rock bands as well, with the purpose of sharing my knowledge and experience with those who start in this road. I've been part of the selecting jury at several local rock festivals and when I am available and things work out, I join some of my friends and put together tribute bands to play at local clubs, paying homage to those bands that inspired us since childhood, such as Black Sabbath, Kiss, Ozzy Osbourne, Dio, and others.
By the fall of 1956, Daniel started making the Silvertone and Danelectro lines using the standard Dano materials: a Poplar wood frame (that comprised the sides, neck and bridge block of the guitar), stapled together and covered with 3/8" thick masonite. The top and back was painted, but the sides were covered in a vinyl material to hide the unpainted poplar wood frame. Also the now infamous "Lipstick tube" pickups were used. These pickups had an alnico bar magnet and coil measuring 4.75k ohms wrapped in brown vinyl tape. The pickup guts were placed inside surplus, chrome plated, lipstick tubes. These pickups were actually the same as previously used and hidden beneath the pickguard. Just now they were adorned in lipstick tubes and mounted in cutouts in the masonite body. Construction methods stayed this way for most models throughout Danelectro's history.
A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.
EQ placement is similar. Some players prefer to mold and shape their guitar’s primary tonal character before it is processed by other effects, but others prefer to adjust the EQ of the finished sound (again, placement in front of delay and reverb is preferable). Or maybe your distortion pedal’s EQ controls just don’t have enough bass or treble and you need to tweak its tone a touch more. If you own an EQ pedal, have fun and try placing it in different locations to see what works best for you.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.
I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.