Oh and you play really great sounding exercises in blues, rock and country that encourage you to noodle around and find your own riffs and leads to play over the tracks which is something that I had never really been inspired to do before with any other book. The author doesn't just throw a bunch of tired, boring, public domain yankee doodles and scarborough fairs because he is too cheap to pay royalties or some crappy tunes that a kindergardener could write but actual original pro sounding tunes and riffs. Yes, I HAVE been around my fair share of crappy guitar lesson books, thanks for asking!
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.
Hoshino Gakki also had semi acoustic, nylon and steel stringed acoustic guitars manufactured under the Ibanez name. Most Ibanez guitars were made for Hoshino Gakki by the FujiGen guitar factory in Japan up until the mid to late 1980s and from then on Ibanez guitars have also been made in other Asian countries such as Korea, China and Indonesia. During the early 1980s the FujiGen guitar factory also produced most of the Roland guitar synthesizers, including the Stratocaster-style Roland G-505, the twin-humbucker Roland G-202 and the Ibanez X-ING IMG-2010.
A chorus effect alters the duplicated waveform in a more subtle, nuanced way. The altered waveform will sound much like the original, but just different enough to sound like multiple voices playing the same note or notes. As it is usually applied, chorus sounds like the same signal running through two amps with a very slight delay between them. In fact, Pat Metheny's famous chorus sound is produced in exactly this manner, using no actual chorus effect at all.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.

i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
Back in the control room, audition each mic, preferably as the guitarist plays along with the other instruments. Listen carefully to how each microphone sounds on its own and, more importantly, to how it works in the mix. Usually, one microphone will come up a winner on the first pass. Don't stop there, however. Instead, leave the "winning" microphone where it is and experiment with the placement of the other two mics. Time-and mic selection-permitting, you may also wish to do a second round of testing with other microphones.
The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
Placing a texture-based effect such as chorus before distortion basically means that the chorus effect will be distorted rather than the distorted tone getting some chorus. That may sound kind or original and appealing to some but trust me – you do not want to waste your distortion pedal effect by distorting an already subtle effect. This very concept is extremely important in determining the correct placement of your effects.

Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.
These pedals essentially do the same thing with overdrive being regarded as a milder effect, similar to turning a tube amp all the way up and distortion a more extreme version of the same effect. Although these are designed for electric guitar, I’ve seen acoustic players use them to great effect through an amp or PA. If done well it provides a dramatic lift to a song. The most important thing is to be familiar with the sound and volume your pedal will create before you try it live.
Are you seeking reliable information and or the evaluation of your vintage guitar's actual real world value today?.... JVGuitars has a simple solution and that is a Joe's Vintage Guitars E-Guitar Appraisal and they are only $45.00 per instrument its fast and its painless and will be conducted by email with no need for damage risk or shipping to and from. Help support JVGuitars service today and go ahead and just order your E-Guitar Appraisal NOW!.. We can send a quick Paypal invoice to you for this E-Appraisal and get started.... ORDER YOUR JVG- E-Guitar Appraisal TODAY! email us your request NOW for your Appraisal at JVGuitars@gmail.com
Most users and experts agree that the Zoom MultiStomp MS-50G is a high quality and high value pedal. But it's not just about bang per buck, because many are satisfied with the quality of its effect and amp emulations. Even Music Radar is convinced of its performance saying, "While not all of the sounds are going to appeal to all players, there are enough usable tones here to make this a very practical item for just about anybody who uses effects."
There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.
Great guitar at this price point. Want to make it better? For so little money you can add lighter strings, a bone saddle, bone nut and pins. It's not necessary but they may help some. A bunch of small improvements put together make a big difference. What really does make a difference is having the action set up properly. Lowering it made it much easier to play for me. The finish and craftsmanship on this guitar is excellent.
It’s hard to look beyond the original and classic Gibson J-45 when it comes to recommending this particular shape. Players love the J-45 on account of its sweet, warm tone with beautiful singing high notes and defined mid range. Upon release it quickly acquired the moniker ‘the workhorse’ on account of its durability and guarantee of quality. Nothing that’s happened since has diminished that.
Body Body shape: Double cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Swamp Ash body on translucent and burst finishes, Basswood on solid finishes Body finish: Gloss Orientation: Right handed Neck Neck shape: C medium Neck wood: Hard-rock Maple Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Gloss Fretboard Material: Rosewoo

Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.

The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
Hollow-body guitars are best suited for classic jazz, but some musicians have used them in rock, country and blues. If you are a non-jazz guitarist interested in this kind of instrument I’m going to assume you know what you are doing. While these types of guitars can sound great with overdrive in the right hands, they’re probably not the best choice for most rock players.
This is a guitar that we’ve featured before as our top pick for those who are looking for an electric acoustic for less than $500, so there’s no surprise that it’s back as one of the very best prospects at any price at all. Epiphone might be Gibson’s more affordable brand, but that certainly doesn’t mean you aren’t getting very high quality when you choose the Dove Pro.
A more advanced technique with the volume knob is called swelling. Play a chord or note with the volume knob off and gently roll it back (many players use their pinky on the side of the knob) to let the sound pass through again. Experiment rolling up the knob fast or slow and see what happens. This takes practice but can produce awesome sounds when used while playing.
It is also important to consider the maximum number of effects that can run simultaneously, which are usually based on effect group types or "blocks". This means that you usually can only have one modulation, one reverb, one drive etc in a preset. Advanced processors allow for more freedom which include combining same type pedals, series/parallel routing, pre-post amplifier routing and many more. While they allow for more ways to craft your tones, these processors also require more tweaking time and are usually more expensive.
Standard eight-string tuning. Used by Scar Symmetry on the song "The Three-Dimensional Shadow" from the album Holographic Universe (album) and "Mechanical Soul Cybernetics" from the album Dark Matter Dimensions, Deftones, Periphery on "Ji", "Overture", "Extraneous", "22 Faces", "Four Lights" and "Stranger Things", by Fear Factory on "Mechanize", "Metallic Division", "God Eater" and "Soul Hacker" and by Devil You Know on some songs.

An effects unit or effects pedal is an electronic or digital device that alters the sound of a musical instrument or other audio source. Common effects include distortion/overdrive, often used with electric guitar in electric blues and rock music; dynamic effects such as volume pedals and compressors, which affect loudness; filters such as wah-wah pedals and graphic equalizers, which modify frequency ranges; modulation effects, such as chorus, flangers and phasers; pitch effects such as pitch shifters; and time effects, such as reverb and delay, which create echoing sounds.[1][2]

These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
If this is your first time picking up a guitar you may not have seen chords depicted the way they are below. You can find out how to interpret the chords by looking at how to read chords. Each of the chords below shows the chord notation and a picture of a hand forming that chord on neck for your reference. This notation is the common way for showing chords, you may find guitar songs depicted differently elsewhere. This is usually the tablature notation. Here you can find more information on reading tablature notation.

Bull necked and heavily tattooed, Mike Ness is not the kind of guy you’d want to mess with. The Southern California guitarist, singer and songwriter has known good times and bad, punching his way out of a serious drug addiction in the mid Eighties. He has funneled these experiences into some of the most hard-hitting, plain-dealing rock songs to come out of the SoCal punk milieu. Ness launched Social Distortion in 1978.

While the Boss MS-3 is a fairly recent release, it does have quite the number of reviews, most of them coming from users who have nothing but good things to say about their experience with the unit. One user summarized what most reviewers felt by saying that the MS-3 is a "game changer". But it's not just about its amp and effects switching, because many were just as impressed with the sound quality of many of its built-in effects, including its overdrive and modulation sections. It's compact and portable design is also very much appreciated, making it an easy addition to any setups.
Billy Corgan chose the handcrafted LJ16 A.R.E. as the foundation for his signature model. A few sonic changes were made during design at Mr. Corgan’s request -- a slight emphasis on the upper-mid harmonic frequencies creating a better listening experience for the audience and a bit more detailing in the low-mid range to help round out the balance to complement his playing style. Other personalized Billy touches are brass bridge pins, TUSQ nut and saddle, GOTOH open-gear tuners and a unique “Zero” head stock logo.
This Schecter is an entry-level guitar into those kinds of tones that are an alternative to the standard Fender and Gibson sounds. Also, the arch top offers another kind of “feel” for playing that gives you slightly more accessible right-hand technique (it’s subtle, but it’s there), plus the body shape tucks the switches and controls out of the way.
To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain, modulation (chorus, flanger, phase shifter) in the middle, and time-based units (delay, echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the guitar’s sound. Some performers use a noise gate or noise suppression pedal at the beginning or end of a chain to reduce unwanted noise and hum.
One step up is the combination of a treble cut and a bass cut, with a single knob to select between them, like the one in the Electro-Harmonix Big Muff (Figure 2). The knob selects a blend of highs left over from the bass cut side and lows left over from the treble cut side. If you make the cut frequencies of the treble and bass sides far apart, you get a persistent midrange scoop, as in the original Big Muff. You can also have the bass and treble sides overlap in the middle and get a midrange hump in response. The near-endless variations you can get by tinkering with the relative values of the parts and the need for only one knob make this a favorite in effects.
Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar.
Distortion and overdrive circuits each 'clip' the signal before it reaches the main amplifier (clean boost circuits do not necessarily create 'clipping') as well as boost signals to levels that cause distortion to occur at the main amplifier's front end stage (by exceeding the ordinary input signal amplitude, thus overdriving the amplifier) Note : product names may not accurately reflect type of circuit involved - see above.[38]

The Orange Crush PiX CR12L is another fairly standard style beginner amp. It has the same standard features as most beginner amps. The Crush PiX CR12L is a little more expensive than some similar featured amps, like the Velocity V10, but it makes up for the extra cost with a better build quality, better tone, and a well designed control layout. The Crush PiX CR12L gives a lot of control over the tone, but manages to do so in a clear, easily understood control panel.

The history of Electric Guitars is summarized by Guitar World magazine, and the earliest electric guitar on their top 10 list is the Ro-Pat-In Electro A-25 "Frying Pan" (1932) described as 'The first-fully functioning solid-body electric guitar to be manufactured and sold'.[31] The most recent electric guitar on this list is the Ibanez Jem (1987) which featured '24 frets', 'an impossibly thin neck' and was 'designed to be the ultimate shredder machine'. Numerous other important electric guitars are on the list including Gibson ES-150 (1936), Fender Telecaster (1951), Gibson Les Paul (1952), Gretsch 6128 Duo Jet (1953), Fender Stratocaster (1954), Rickenbacker 360/12 (1964), Van Halen Frankenstein (1975), Paul Reed Smith Custom (1985) many of these guitars were 'successors' to earlier designs.[31] Electric Guitar designs eventually became culturally important and visually iconic, with various model companies selling miniature model versions[32][33] of particularly famous electric guitars, for example the Gibson SG used by Angus Young from the group AC/DC.

The basic sound of the amplified electric bass or double bass can be modified by electronic bass effects. Since the bass typically plays an accompaniment, beat keeping role as a rhythm section instrument in many styles of music, preamplifiers ("preamps"), compression, limiters, and equalization (modifying the bass and treble frequencies) are the most widely used effect units for bass. The types of pedals commonly used for electric guitar (distortion, phaser, flanger, etc.) are less commonly used for bass, at least in bands or styles where the bassist mainly plays a rhythm section role. In styles of music where the bass is also used as a soloing instrument (certain genres of heavy metal, progressive rock and jazz fusion), bassists may use a wider range of effects units. Jazz fusion bassists who play fretless bass may use chorus effect and reverb for their solos.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.

In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.

It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.
I have 12 years whit my SL3 Jackson and 12 years whit my RG7420, so far I have replaced both POTs on the jackson, the frets are really worn out and FR chrome is peeling.. great guitar crappy components. oh, I havent had to replace anything on the Ibanez yet other than the stock pickups for something better. both are made in Japan =). So dont tell people that Ibanez sucks before actually owning one...
Mikko, spot on. Even light wood has density, and there comes a point in solid body electric guitars where how dense any piece of wood is only makes a difference acoustically. The point you made about how a guitar feels when you're playing it is sound, though. Its weight and acoustic resonance will affect how you respond to it and how you attack it (same for neck thickness and profile), and that will account for the preference we have for one guitar over another of the same model.

The Effect: Expression pedals are nowhere near as popular as some other guitar effects. However, they have the power to make or break your guitar tone, depending on how far you are willing to go. At their very core, expression pedals are nothing more than a potentiometer in a pedal form. They can be as simple as that, which is represented beautifully by the Mission Engineering Inc EP­1, but there definitely are more advanced designs available. The purpose of an expression unit in your signal chain is to give you more control over equipment which supports this kind of accessory. We’re talking rack mounted effects, digital processors, guitar effects pedals and more. In some cases they are downright necessary, but in most they offer a whole new level of control over the effect in question. Despite their inherent simplicity, finding a good one still take some effort, lots of research and planning.
Reverb is still the most commonly installed effect in amps, but there are some amplifiers that go overboard, to the point that they outdo even multi-effects units. Unfortunately, even those with the most number of effects allow for limited simultaneous use, so no, you can't put 10 virtual pedals together in your practice amp. Also don't expect the quality of built-in effects to match that of boutique pedals, but they can be a great addition to an amp if used sparingly and for appropriate songs.
The Eastcoast Vintage T Series Custom Electric Guitar seen here in Flame Red is a cheap electric guitar that certainly doesn’t suck! It features appointments usually associated with higher tier guitars such as a solid alder body and hard maple neck. In addition, you have a high quality 22 fret rosewood fingerboard as well as 2 x single coil pickups to achieve a wide variety of tones from rock to blues to country – this thing can handle it all. The “T” style bridge is a great feature often found on guitars 3 x the price. A fantastic option and an extremely hard working, handmade guitar for those in need of a high quality first guitar or a great second option for the studio or stage.
Kadence guitar has soothing sound quality with a bright tone, which indicates you have to go for higher gauge strings if you need bass-heavy sound output. This guitar is manufactured in our home nation – yes in India! was established in -2006. They produce an acoustic range of guitars that are available at a starting price of 5000 INR. approximately. Guitars in this brand that have a superior quality of sound start from 10,000 INR.
A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)
We wanted to find electric guitars that sound as good as possible and in a blind test would make anyone hesitant. We must advice you to not only take our word for it, though. When buying a new guitar you should always try it out and compare it to other guitars. Even if it on paper might look like a guitar must be the best one for you, that might not be the case when you actually try it out. The sound might be great, the brand famous and the price ok, but you need to be able to feel like the guitar is an extension of you, and the only way to make sure of that is to try before you buy.
Inspired by the Fuzz-Tone’s ability to add an aggressive swagger to any guitar melody, the mid-60s saw an explosion of copycat fuzz stompboxes. Most of the imitations were atrocious, but some became infamous. A few deliberately tried to combat the limitations of guitars themselves, like Gary Hurst’s 1965 Sola Sound Tone Bender MKI, which reused the three-transistor circuit of the Fuzz Tone. For the MKI, Hurst tweaked certain resistor values, which extended, or sustained, the guitar notes for longer. A two-transistor version of the tone bender (the MKI.5) morphed into Jimi Hendrix’s favorite stompbox, the simple and durable Arbiter Fuzz Face. The later model, the MKII, was at the heart of Jimmy Page’s secret sound in early Led Zeppelin recordings, When the Fuzz Face was released in 1966, it set a precedent for Hendrix imitators (“I Don’t Live Today” being the most frenetic extension of the Fuzz Face’s limits). With a keen ear for experimentation, Hendrix would often prefer the Fuzz Face’s tone when the battery was half-charged, in large part because germanium transistors fluctuate according to voltage. Guitarists would often have to wade through different batteries in order to find their own tone.
That’s what this book is about and it delivers in spades. It sharpens your will to learn and how to set goals rather than your actual technique. If you need to reinvigorate your desire to learn and find the importance of why you are learning in the first place, this book that will apply Zen lessons to the art of learning guitar in a way that is very motivational (but not in a shove spiritual dogma in your face kind of way). If that is what you are looking for in a guitar book, it is hard to beat Zen Guitar.

By far the best bang for the buck. These guitars are beautifully made with good attention to details such as fret ends, bridge fit and neck joints. They also have wonderful finishing and are made from quality materials. The 'snob' factor is the only thing against them, they are not Gibsons. Martin's or Fender's, BUT they do play just as well and quite frankly, only those with a good ear and perfect pitch could tell the difference in a rock environment. I have Fender, Gibson, Taylor, Columbus, Washburn, Squire and Maccaferri Guitars, as well as Richwood. Sadly like the great majority of guitarists, the guitars themselves are more capable than I am, and I am happy to admit it. Having an exceptional guitar will not make you an exceptional guitarist, just as a more professional camera won't make you a professional photographer. The Richwood Artist / Master series of guitars are good, believe me! For the average guitarist, pro or am, you can buy more expensise guitars but not better as far ...more
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.

Looking for a super-hot, aggressive metal tone? You need a dedicated high-output humbucker that will crush any amp. Whether passive or active, it’s humbuckers that dominate the heavy rock and metal genres, offering huge power, mix-cutting melodic lead tone, and noise-cancelling abilities – just what’s need when the volume and gain increase. For gigging metal guitarists, humbuckers are pretty much essential. This genre has some great affordable options that will turn any axe into a tone monster, as well as some high-end signature pickup sets from legends such as Dimebag Darrell and Mick Thomson, while the premium James Hetfield Humbucker Set from EMG is one of the best purchases a gigging metal guitarist can buy!
Finally, new by ’41 was the No. 130 Supro Rio Spanish Guitar. This was a slothead Regal roundhole flattop done up in a “radiant blonde hardwood body.” It had an 13″ body and logo plate on the head. In place of the typical acoustic bridge was the same square pickup/control panel found on the Clipper. The cord was permanently attached and sort of snuck out from under the control plate on the top. Cost was $33.

and i dont know how the new ones are, but the only ones, though called AD3000, they weren't like the other 3000 series guitars Agile offered. back then, they came with maple necks. they also came with 3 or 4 piece bodies, while AL3000/3100 etc came with 2. this came with a matching headstock, which only the 4000 series offered....so its almost as if the AD3000 was a missing link between the different series of guitars....

Now, instead of just containing part of the sound completely, the tone knob is hooked up to a capacitor. The capacitor doesn't let everything through. Basically, it starts with the highest frequencies, letting them through to be contained rather than go to the amplifier. The more of the signal you send to the capacitor, though, the more of the spectrum it is forced to let through, meaning that more and more of the high end of the continuum is let through - the rest of the current is sent back and is let out through the line to the amp.
Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.
Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.

These guitars have the smoothest necks. Their oiled and waxed naked necks are the most comfortable necks I have ever played on. They offer a lot of great options, but they especially accommodate those of us with smaller hands. Every Music Man is fully loaded with ergonomic and functional features. No fatigue, they stay in tune well and set up easily.
If you aren't planning to be in a band, i would get a modeling box like a POD, and just play on headphones. If you have the cash, I would just buy things here used on Craigslist, then sell them when I was leaving. If you know your prices, you could use the gear and get all your money back. Voltage issue is a problem with amps, one that is solvable, but seems like hassle for you. it really depends on your needs when here though.
Though modulated delays are essentially effects, the need to balance the dry and delayed sounds as a means of regulating the effect strength means that using these devices via insert points makes them much more controllable than trying to use them in an effects send/return loop. If you do use them as a send effect, you can achieve this balance by automating the send level.
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Multi-effects devices have garnered a large share of the effects device market, because they offer the user such a large variety of effects in a single package. A low-priced multi-effects pedal may provide 20 or more effects for the price of a regular single-effect pedal. More expensive multi-effect pedals may include 40 or more effects, amplifier modelling, and the ability to combine effects or modelled amp sounds in different combinations, as if the user was using multiple guitar amps. More expensive multi-effects pedals may also include more input and output jacks (e.g., an auxiliary input or a "dry" output), MIDI inputs and outputs, and an expression pedal, which can control volume or modify effect parameters (e.g., the rate of the simulated rotary speaker effect).
SOLD OUT; Here we have another great vintage Takamine this one is a timeless classic recreation of the trusty and also great sounding Martin D-17 , this fine Takamine F349 example was well crafted in Japan nearly 24 years ago. This guitar is a very good++ vintage Japanese guitar and has been well maintained and plays amazingly with great low action still to this day all these years later. Its made of all Mahogany( other than rosewood fingerboard & bridge ) that is a high grade solid Mahogany neck it really has a nice substantial feel to its medium profile with a 1-11/16ths width at the nut, The sound box is also ALL Mahogany and it offers a nice rich vintage tone one might expect from the company Takamine has copied in this case the Martin D-17 directly, This example’s cosmetic integrity its fit and finish to this day is still pretty nice not exactly like new vintage but is JVG rated at very good with NO major cracks at all and NO finish checking = none – . she did have some small paint chips here and there that we easily matched with clear mahogany stain lacquer applied with a brush tip to the spots only and one spot on the lower treble bout where 3 discolor spots were ( cold be from factory ) it looked original anyway I touched that up a bit as well later I buffed the touch ups back she looks much better now and this will also help to preserve its original finish integrity as well as keeping up her beauty. Great low and playing action on this one it really plays with ease Take a good look she still shines like glass and her sound is clear and the volume is very good, and tone is vintage sweet from its well Good and well aged tone woods attribute to making this guitar sound as good as she does. This F349 model is a full size Dreadnought as and she is faithful in its shape & size of the vintage Martin D-17 it copies other than its original design Takamine headstock shape… a very cool D-17 guitar, its 23+ years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. Please look her over well feel free to ask any questions. This is a nice players guitar and is sure to please. It is JVG Rated 8.5/10 very good+ Vintage used condition. WYSIWYG .
ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much!
Ibanez are one of the best known of the more contemporary style guitars with artists such as Satriani and Vai on their books. This particular model, the RG 450 Deluxe, boasts a layout which traditional Fender players will be familiar with, but it's a very different guitar. It is a more compact instrument than the Stratocaster and with two humbuckers separated by a single coil, the pick-up system allows you to create some thick tones. In fact if you play around with the five way selector you can get just about any tone you could want. The body shape is very sharp and clinical and with jagged bolt inlays and the traditional Ibanez pointed headstock the guitar is very recognisably Ibanez. It also features a quality tremolo unit and two full octaves on the fingerboard with wide cutaways for access. This is an excellent alternative to the Gibson or Fender style dichotomy that dominates the market. If you're searching for your own sound, somewhere between the two, it's worth checking out the Ibanez range.
The Hummingbird Pro's unique look breaks the typical monotonous appearance of conventional acoustics, and it does so without straying too far from the familiar. It is easily identifiable by its uniquely shaped ornate pickguard, which matches the guitar's faded cherry sunburst finish. Whether you are on stage or just jamming with friends, you can be sure that this acoustic will stand out.

The RP360 XP lets you combine different effects to craft your preferred sound by choosing from its wide variety of options including 74 effects, 32 amp models and 18 cabinet models. Each setup can be saved into one of its 99 user presets, that allow for incredible flexibility. The interface has a bit of a learning curve, but allows for deep editing.

If you want to invest in a guitar that replicates the famous ’70 guitars, look no further than the model offered by Fender Vintage. This product was designed to feature a basswood body that is a replica of the famous workhorse Fender guitars. Moreover, the device has a “C” shape neck that was constructed from maple, and that is said to be quite resistant.
Just wanted to get back with a thank you note. I received the kit last week and installed it in my Stratocaster with Texas Special p'ups. It's absolutely brilliant. Not only is the Blend control a superb new addition to the tonal options, but the pots also feel so sturdy and smooth. Feels like I have some custom build now. Just amazing, thank you! In addition, the treble bleed mod is the icing on the cake. I’m no longer afraid to roll down the volume knob." - Andrei Custom Blender Mod for Strat®  

I have a shecter omen extreme 7 and found that the factor strings they put on were nice for my small fingers. I had to replace because the factor set in general needed some tweaking and they changed all the strings. Now i don't really like the strings they put on. Too small. All they had listed for the strings were 24X jumbo strings. What string set should i buy since i play Ambient, soft, but also djent metal.
The cost: The original G&L scheme calls for alternate pot values, but the project here uses the 500K pots found in most humbucker guitars, so all you need are wire, solder, and a few capacitors. On a three-knob guitar, you wind up with one master volume control and two master tone controls, but you sacrifice individual volume controls for each pickup.On a four-knob guitar, you still have independent volume controls, but you lose the independent tone controls.
Eddie's Guitars specializes in the finest electric guitars available today. We have spent many years seeking out the best builders, brands and models available from yesterday and today. From classics like Fender Custom Shop and Gibson Custom Shop to boutique builders like Collings, PRS, Tom Anderson, Grosh and John Suhr we have every avenue of the sonic world of guitar covered.
Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.
The reverb driver amp consists of a phase inverting push-pull circuit made from dual sections of a 5532 high quality audio op-amp. This provides a voltage swing of approximate twice the supply voltage to the reverb impedance matching transformer, allowing higher power transfer. The 100 ohm resistor is critical for insuring a clean drive signal, without it, the op-amps can saturate when driving the transformer, producing unwanted distortion.

On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.

Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.
The next most important review criteria for any electric guitar, is its sound. Please allow me to be very clear here that this guitar is mostly suited for heavy rock tones, aggressive higher leads and chugging, crazy distortions. If you are more interested in a crisp, jazzy tone, maybe you should opt for a beginner’s Stratocaster electric guitar like Squier by Fender, instead. Having said that, this instrument sounds great in its genre, and also remains in tune for long periods, so you don’t have to worry about manually tuning it. Yes, the string tension is higher as compared to a 24.75” Stratocaster or XX Les Paul, but in a way this challenges electric guitar novices to acquire greater mastery over their notes!
The F-50 was the bottom of the line, a single cutaway with a single DeArmond humbucker pickup, like those on the previous acoustic hybrids, in the neck position. Controls were one volume and one tone control mounted along the edge of the lower treble bout, with black, chrome-topped knobs. This had a trapeze tailpiece with a sort of Cabinet of Dr. Caligari “M” cutout of the center. This was finished in a brown to yellow two-tone sunburst. The first prototype bore the serial number 179828. 1,165 F-50s were built from the middle of 1962 to the spring of 1965.

I have a hunch its a cheapo guitar and probably not worth a neck reset. Can't tell if it has a bolt on neck. my other guitars all have more warped soundboards though. The saddle is sort of cradled in wood by the bridge, the angle could be better, but I'm surprised there is any angle considering the saddle only pops out like a millimeter. The bridge curves down towards the pins to provide the angle. It probably has been set up in the past by someone who wanted an acoustic guitar to play like an electric, then it got reversed it later by way of the truss rod.

50 jazz blues acoustic Acoustic Guitar artist blues blues guitar lesson business chord progressions chords comping creativity david hamburger fingerstyle greatness guitar guitarist guitarists guitar lesson Guitar Lessons guitars improvisation jamming jazz jazz blues jeff mcerlain Larry Carlton licks live music musician musicians performance phrasing playing power tab producer producers producing recording rhythm rock tab notation truefire tunes video

1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD

The “Studio” model was introduced in 1983, and is still in production. The intended market for this guitar was the studio musician; therefore, the design features of the “Les Paul Studio” were centered on optimal sound output. This model retained only the elements of the Gibson Les Paul that contributed to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omitted several stock Gibson ornamentations that did not affect sound quality, including the binding on the body and neck. The two notable exceptions to this are the Studio Standard and the Studio Custom. Both models were produced in the mid-1980s, and included body and neck binding, though with dot fingerboard inlays instead of more ornate trapezoids. The first Studios from 83 to 86, except for Studio Standard and Studio Custom, were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio “faded” has a chambered mahogany body and top and a satin finish and is the lowest priced Gibson USA Les Paul.

You'll then learn G major and the variation you can play of this chord, where you hold the B string at the third fret, or just leave it open. The final chord you'll learn is F major. This one is tricky because its a barre chord, but there is a way of making these types of chords a little easier to learn, as shown in the video. You will also be shown the partial barre chord shape of F major, and will see how moving this shape around gives you any major chord you want to play.
He revolutionized music by combining two different guitar styles who were begging to be played together, blues and country. It was through this courage and confidence that Berry was able to convey his slick attitude that made everyone stop and listen. Sadly, however, even though his lyrics and performances were positively received, the artist himself did not have as positive a reception. He was said to be quite hard to get along with… but that didn’t stop his band swinging along. A sign of complete trust in what they were achieving together.
The Sweetwater Used Gear Marketplace is a lot like Craigslist or eBay, only it's exclusively for gear, and it's 100% free — there are absolutely no charges or fees involved. Buying or selling, you'll be interacting directly with other musicians and audio enthusiasts, so we've included some tips below to help navigate your transactions. Learn More | Safe Shopping Tips
If you’re used to using a pick to play your guitar, it might be time to get a handle on fingerpicking. This style of playing is incredibly diverse, and consists of various techniques that you can employ to gently pluck the strings of your instrument. It also has the potential to eliminate the plasticky strumming sound that can drive your unintended audience batty. It isn’t a good fit for every genre, but it’s important for all you metalheads to remember that two-hand tapping is technically a form of fingerpicking.
The OM model came about due to Perry Bechtel, who was a virtuoso plectrum banjo player. Perry came to see the Martin family in the early summer of 1929. He wanted Martin to make him a guitar which he could easily adapt his banjo style (remember by the late 1920s guitar was the hot instrument, replacing the banjo). He requested 15 frets clear of the body and a 27" scale in Martin's largest standard body size (which at that time was the 000, with 12 frets clear of the neck). The 27" scale would retain the fret spacing of the plectrum banjo, and 15 frets clear of the body would closely resemble the length of a banjo neck.
EQ (Equalizer) – A frequency-based effect that allows you to boost or cut frequencies along the audio spectrum. Graphic EQ pedals such as the GE-7 and GEB-7 have faders for each frequency band that you can move up or down to boost or cut the frequency. EQ pedals can be used to tackle problem frequencies such as mid-range honk or to give a bass boost or add some high end sparkle. Alternatively you can use EQ to create interesting tones such as emulating a small radio by rolling off the bottom end and boosting the high mids.
1. Examples. There are a handful of examples in this book and that's about it. I expected much more in the way of alternate wiring examples but they were only mentioned in passing it seems. Additionally if you're looking for good step by step instructions you wont find it here. The instructions are average at best and never really go deeper than "put this wire here and that wire there" . It's step by step,but just barely. Don't expect any deep explanations on the theory behind why certain wirings do what they do or why they sound the way they do. It's cursory at best.
yeah, i used to play the vht straight up sometimes. that amp was tonal sweetness, and had a tank reverb. if i dime it, i can get away with playing alot of stuff on the ac4. but i like having a little chorus for certain things, and i do a couple of songs that i would like to have a rotary pedal for, and although i'm not big on reverb, i don't mind using a touch of delay in place of it. if i did have a wah, i'd use it as a tone knob. oh, and i want a harmonizer. specifically, the eventide pitchfactor.
At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
On the other hand, practicing with your band should allow you a bit more flexibility with sound. You can ask the rest of the band to accommodate for you a little, lowering the sound on their own instruments (ask the drummer to be nice to the drums). Even during an all out practice session a small amp might be able to keep up with the rest of the band’s volume, if powerful and high quality enough.
The prime advantage of Epiphone is that you get a guitar built to the same specs as the Gibson Les Paul, at a greatly discounted price. With that being said, an Epiphone is not equal to a Gibson simply because it shares the same design. The craftsmanship is where the two brands differ the most, as USA made Gibson’s utilize higher quality materials than the Epiphone line. Epiphone uses a cheaper mahogany in the construction of its guitars, while the electronic components are lower quality as well.
I like most of the the 814's I've played though they seem just a bit brighter than some other guitars along that range. I prefer Collins guitars they're kind of in between the Martin sound, and the Taylor's brighter sound. After recording with several different ones. My favorites productions are Collin's OM1A , and more affordable Blueridge, and Recording king. I prefer Rosewood back and sides, Adirondack top, mahogany neck, with ebony fingerboard. Although mahogany back and sides with Sitka/ Engelmann tops sound nice too. When recording I think (might just be me) that I get better note separation from the Collins
With his exceptional talent, it seems that everyone wants to collaborate with Santana. What’s more, when he does join hands with another artist, it seems that his raw and authentic sound always shines through, taking the limelight. That is not to say that his tracks aren’t all different and uniquely great in their own way! There are so many manipulations that he has found and continues to find with the Latin rhythm. People say that the Grammy-winning guitarist can be identified with just one single note – now that’s an achievement!

Fender was started by Leo Fender in 1946 in Fullerton, CA. Leo Fender sold his company to CBS in 1965. In 1985 Fender employees purchased the company. Leo Fender founded Music Man in 1975, and later founded the G&L Musical Instruments company. Fender brands currently include brands include Fender®, Squier®, Guild®, Gretsch®, Jackson®, Charvel®, EVH®, Tacoma…
4x vintage revvo castors as used on loads of vintage cabs, combos ideal if you have a vintage cab and want period correct castors What you see in the photos is what you get, this is the second set I have for sale, the rubber wheels have split and their are chunks missing out of a few. (this is reflected in the price) this isn’t an issue if your cab is just going to stand in your front room looking cool. please do study the photographs Free postage in the UK Anything else just ask

’71 blue vinyl combo guitar amps included the Univox 1040 and 1240. The 1040 Guitar Amplifier ($480) was a combo sporting 10 tubes, 105 watts RMS, two channels, four inputs, volume, bass, middle, treble controls for each channel, presence, reverb, tremolo, footswitch, and two 12″ Univox Heavy Duty speakers with 20-ounce Alnico magnets (possibly Jensens). The illustration shows a grille with two small circles on top and two large circles for the speakers. It’s possible this had a pair of tweeters in the small holes, but the description doesn’t say. The 1240 Guitar Amplifier ($399.50) featured eight tubes, 60 watts, two channels with the same controls as the 1040, and four 10″ Univox Special Design speakers with 10-ounce ceramic magnets (again, sound like Jensens). The grille had four round cutouts.
Parallel coils: coil tap connection needs to be broken for this kind of wiring, so three lead pickups cannot be wired this way. The idea is to join start of each coil with finish of the other coil. One on those connections will be hot, the other ground. Parallel coils will sound more like a single coil sound, noticeably quieter and shallower than a series connection.
So, you want a guitar that's absolutely packed with tone? One that has the vibe that it's been pulled straight out of the 1950s, but has all the playability, comfort, and stability of a brand-new instrument? Then get your hands on the Godin 5th Avenue Kingpin. This stylish archtop smolders with personality. And with the P90 pickup onboard at neck position, you have an unbelievable vintage/atittude tonal combination working in your favor. You'll notice right away that the Godin 5th Avenue Kingpin has plenty of projection and volume, and moreso in the low/mids than traditional archtop guitars. You'll love it for that. Why does the Godin 5th Avenue Kingpin sound so good? Sure, it's that P90 working with the hollowbody design that gets things going. But the primary tonewoods here are pure North American perfection, including a Canadian Wild Cherry archtop, back, and sides. The finish here is a custom polish that gives each and every Godin 5th Avenue Kingpin a satin sheen that recalls French 19th century craftsmanship. Whatever your musical style, you'll have a friend on your side in the Godin 5th Avenue Kingpin. It is, plain and simple, a great guitar. Godin 5th Avenue Kingpin Archtop Guitar Features at a Glance: Finish: Cognac Burst Archtop hollowbody electric guitar Canadian Wild Cherry archtop Canadian Wild cherry back and sides Silver Leaf maple neck Contoured high-gloss black headstock Custom Polished finish Rosewood Fingerboard Adjustable Tusq Bridge by Graphtech Cream Binding 1 x Godin Kingpin P90 single-coil pickup 1 x Volume, 1 x Tone 16" fingerboard radius 24.84" scale 1.72" nut width
Now comes the fun part. Put the jack and the tone pots into the F hole, and use the jack hole wire to feed the jack through the cavity. If the washer holds, the jack will pop up through the jack hole. Thread the wire through the jack washer and nut, and pull up on the wire to hold the jack in place while you tighten the nut. Once you’re sure the jack is firmly installed, clip the wire and let the washer end fall into the cavity. You can shake that out through the F hole later – just leave it for now.
The ’37 Hawaiian Guitar in both the Sorkin and Grossman books was basically the same squarish, pear-shaped guitar as in ’36, sans pickguard. It had a polished Ebonoid fingerboard with new parallelogram position markers replacing the old dots. Also, the large, two-part rectangular pickup cover/tail assembly was replaced with a more conventional, modern design. The pickup cover was the new rectangular type with the two pole extensions exposed. Off to the side of its surround was a little square plate on the treble side containing the volume control. The strings attached to a small piece of slotted metal hidden under a rectangular cover or “handrest.” Gone were the control wings. The microphone attachment stuck out the bass side of the guitar. The cost was $35, plus $6 for a case.
| Tags: 1940's fidelity amplifier, 7F7, amp, amps, chickenhead knobs, EL86, fender clone, fender tweed champ, fidelity amp, fidelity amps, gibson skylark, gibson skylark amp, guitar amp, Guitar Amp History, guitar amps, practice amp, practice amps, silverface champ, silvertone, tone, tweed champ clone, valco, vintage amp, Vintage Amps, vintage guitar amp, vintage guitar amps
Guitar lessons work best if you're putting your skills together to learn how to play songs. That's why Guitar Tricks has a ton of great song tutorials for when you've mastered the Core Learning System, or if you want to try something new. These easy guitar songs are great, especially if you're a beginner that recently picked up an electric guitar. 
TC Electronics implemented their TonePrint technology into this stompbox. TonePring allows you to import your own presets, which you previously design using a piece or proprietary software. Such a configuration of features and controls ensures borderline endless possibilities. None of that matters much if the quality of tone itself isn’t on par. In this case, you definitely don’t have to worry about that.

At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.

The original dreadnought shape was launched by CF Martin, one of the big names in acoustic guitars, and was named after an old English warship. It features rounded shoulders, and the neck typically joins the body around the 14th fret. The dreadnought strikes the most even balance between volume, size and ease of playing, and for this reason it has been used by just about every big-named player you can think of.

{ "thumbImageID": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Traditional PRO-II Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ocean Blue Burst", "sku": "sku:site51500000014857", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst-1500000014857.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51500000014856", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red-1500000014856.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red/J40313000004000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red/J40313000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000014853", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst-1500000014853.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst/J40313000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst/J40313000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Desert Burst", "sku": "sku:site51500000014855", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst-1500000014855.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst/J40313000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst/J40313000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000014854", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony-1500000014854.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony/J40313000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony/J40313000001000-00-60x60.jpg", "imgAlt": "" } ] }