Maton Guitars - Australia's leading manufacturer of Acoustic and Acoustic / Electric Guitars. Until the late 1930's the Australian guitar manufacturing industry was virtually non existent and good quality guitars were hard to find. The best guitars, it was well understood, came from the U.S.A. Bill May, a Melbourne born jazz musician, woodwork teacher, and luthier, decided to change all that.
Much like how a wah-wah pedal is a foot rocker attached to a tone pot, the volume pedal is the same deal, but with a volume pot instead.  As you sweep from heel to toe, you’ll go from “0 to 10”.  Aside from adjusting the overall volume, a guitarist can produce other worldly sounds by swelling into notes, or rocking the pedal rhythmically.  When these sounds hit your delay and reverb, the sky is the limit.
Again, if a Martin guitar needs a neck set, don't try and solve the problem of high string action any other way! Take the guitar to a *good* repair person, pay the money, and have a proper neck set done. A good neck set will make the guitar play and sound the best it can. With the correct neck set and bridge and saddle height, the guitar strings will drive the top of the guitar best, giving the best sound possible, and at the ideal playing action. And after all, isn't that what it's all about?
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.
The frets are those thin metal bars running down the neck, which act as note separators, allowing you to play individual notes and chords. Most guitars will feature 22 frets, although those more rock and metal-inclined will sometimes offer 24, allowing you to reach higher notes. As a beginner it shouldn’t really bother you whether you have 21, 22, or 24 frets. It’s only as you grow into the instrument you’ll find what works best for you.
The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!
In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.

Combo or Head + Cab? Again, this is a personal choice. It's easier to have a combo, but a head + cab combination might be easier (& lighter) to carry, as you can carry both parts separately. Of course, if you're in a metal band, you simply MUST use a really loud head amp (no matter how small the venue is) and a 4x 12" speaker cabinet. That's just how it's in the rock bible, somewhere! We've put together a complete guitar amp buyer's guide to help you figure out what you need.

Though the line between the two is easily smudged, where multi-effects processors create a broad spectrum of effects, modeling processors can recreate the sound of particular instruments and amplifiers, like a Gibson Les Paul played through a stack of Marshall amplifiers, or a Fender Stratocaster played through a Fender Deluxe Reverb amplifier. A modeling processor offers you the ability to make your guitar and amp combination sound like whatever guitar and amplifier sound you want—even if you don’t own either guitar or amplifier. You are limited only by the number of models programmed into the modeling processor when you plug your guitar into one.
The Fender Stratocaster born in the early 1950's in Southern California, and more precisely in Fullerton, near Los Angeles, hometown of the Fender(tm) Musical Instrument Co. Since it's official debut in early 1954, the Fender Stratocaster(tm) has proved to be possibly the most successful electric guitar ever manufactured. Quite a legend in it's own right! The Strat(tm) - as it is affectionately known has to be acknowledged as one of the major landmarks in the history of the guitar. It enjoys a popularity undiminished by time and changing fashions and remains quite clearly a firm favourite among many generations of players, no matter what their style of music....... Fender Stratocaster 'Tex Mex' Jimmie Vaughan signature model - $999

It is a great budget guitar but not very much useful if you want to play this at an advanced level. Actually, this is an ideal and the most popular electric guitar for intermediate players; also it's suitable for the beginners. So make sure you upgrade your guitar once you master the basics of using this guitar. Find out the latest price of this guitar using the button below which takes you to the Amazon product page of this model and tells you all the information about it.
My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!
Two easily overdriven cathode-bias 6V6 output tubes deliver a sweet, harmonically rich tone, and the 5Y3 tube rectifier has the sag required for dynamics and touch sensitivity. This holy grail of vintage combos has been used by Neil Young, Mike Campbell, Rich Robinson, Mark Knopfler, Billy Gibbons, and countless others. If you can’t afford the original, more-affordable reproductions are available from Victoria, Kendrick and Clark Amplification, to name a few.
In the following years both Dobro and National built a wide variety of metal- and wood-bodied single-cone guitars, while National also continued with the Tricone for a time. Both companies sourced many components from National director Adolph Rickenbacher, and John Dopyera remained a major shareholder in National. By 1934, the Dopyera brothers had gained control of both National and Dobro, and they merged the companies to form the National-Dobro Corporation.
The third technique I would like to talk about today consists in, once again, doubling a distorted, or not, guitar sound with a...folk guitar. This will give you much more definition and sustain on arpeggios, while on rhythm guitars it will allow you to highlight the sound's percussive aspect, and on power chords it will make your sound more powerful. This production technique has been around for ages (Led Zeppelin was pretty fond of it, for instance). But this doesn't mean that it's an outdated trick and it can't be used on modern productions: lots of contemporary metal bands still use it nowadays.
{ "thumbImageID": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze/J27936000005000", "defaultDisplayName": "Jackson Pro Soloist SL2Q MAH Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Purple Phaze", "sku": "sku:site51500000189830", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze-1500000189830.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Purple-Phaze/J27936000005000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Northern Lights", "sku": "sku:site51500000189831", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Northern-Lights-1500000189831.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Northern-Lights/J27936000004000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Magenta Burst", "sku": "sku:site51500000033868", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Magenta-Burst-1500000033868.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Magenta-Burst/J27936000003000", "brandName": "Jackson", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Alien Burst", "sku": "sku:site51500000033869", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Alien-Burst-1500000033869.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Alien-Burst/J27936000002000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Blue", "sku": "sku:site51443624092615", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,360.53", "priceVisibility": "1", "skuUrl": "/Jackson/Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Blue-1443624092615.gc", "skuImageId": "Pro-Soloist-SL2Q-MAH-Electric-Guitar-Transparent-Blue/J27936000001001", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Ovation’s first solidbody bass guitars were the 1261 Magnum I and 1262 Magnum II, introduced in 1977, as well. While not as exotic as the Breadwinner/Deacon, the mahogany Magnums had an elongated offset double cutaway design that basically had nothing to do with Fender. Surprised? The upper horn was a bit more extended than a Breadwinner and the upper edge had a slight waist. The lower bout cutout was not as dramatic as the guitar equivalent. Both basses had bolt-on mahogany necks reinforced by three strips of carbon graphite to eliminate warping, a wide strip in the center of the back and two more underneath the fingerboard. Fingerboards were unbound ebony with 20 frets and dot inlays. Both basses had a cast metal housing with two pickups, a small split double-coil unit at the bridge and a large square four-coil unit at the neck, this latter with little screw-adjusted trim pots for micro adjusting volume. The bridge/tailpiece was a heavy-duty plastic housing with heavy adjustable saddles. In front of the bridge was a lever-triggered mute. The primary difference between the I and II was in the electronics. The Magnum I had a three-way select with two volume and two tone controls. It also had two jacks allowing either mono or stereo output. The Magnum II had the three-way plus a master volume and an active three-band graphic equalizer, mono output only.
There have been a series of the Boss RV pedals, some of which have included delay as part of the package. The RV-6 doesn't brand as a reverb/delay pedal, but it does have a "+Delay" mode that incorporates it into the reverb's decay trail. While it doesn't quite meet the same decorated feature list as the HOF (no true bypass, no analog signal, less modes) the RV-6 does add an expression pedal option, which gives you some added flexibility that might be more helpful in performance situations.

Shreddage 2: Absolute Electric Guitar is our answer to the challenge of total guitar sampling. It is a complete instrument with elegant scripting, intuitive mapping, and incredible depth. This virtual guitar for Kontakt is the ultimate weapon for rock & metal music, built from the ground up for realistic playing in any hi-gain style. All samples were recorded on a 7-string guitar and are provided clean/DI so you can use your own custom amp tone - or use the included Peavey ReValver HPse.

Jazz guitarists learn to perform these chords over the range of different chord progressions used in jazz, such as the ubiquitous ii-V-I progression, the jazz-style blues progression (which, in contrast to a blues-style 12 bar progression, may have two or more chord changes per bar) the minor jazz-style blues form, the I-vi-ii-V based "rhythm changes" progression, and the variety of modulation-rich chord progressions used in jazz ballads, and jazz standards. Guitarists may also learn to use the chord types, strumming styles, and effects pedals (e.g., chorus effect or fuzzbox) used in 1970s-era jazz-Latin, jazz-funk, and jazz-rock fusion music.

Categories: Guitar manufacturing companies of the United StatesGuitar amplifier manufacturersManufacturing companies based in ChicagoManufacturing companies established in 1890Companies disestablished in 19681890 establishments in Illinois1968 disestablishments in IllinoisDefunct companies based in IllinoisMusical instrument manufacturing companies of the United States

Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: amplifiers","prop1":"[mf] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
Many of the Cordobas, such as the C7, come with a gig bag or case, which makes it easier to keep your guitar in great condition, especially if you purchase a humidifier block. If you head over to the Amazon listing for this guitar, you might see that the reviews are the same for this guitar as they are for another Cordoba instrument, so there really isn’t much extra information, unfortunately.​
Paul Reed Smith is a relative newcomer having been born just 2 years after the Stratocaster was created, and founding PRS Guitars in 1985, but in that relatively short period of time PRS have made a huge impact on the guitar world, have been used by the likes of Carlos Santana, Ted Nugent, Dave Navarro. and Mark Tremonti, are now the 3rd biggest electric guitar manufacturer in the USA, and have earned their place among the best electric guitar brands.
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Yamaha-C5-Salamander-JNv5.1- Arguably the best free piano on the internet and better than many of the expensive ones as well. Modified for sf2 with five brightness levels with optional resonance and this set includes the new Dark, Mellow and Dynamic Grands.  All in a set at 592mb in size.  This version has the detailed 15 velocity layers for seamless expression.

Installing pickups and wiring mods can be complicated, but learning to do common pot and jack repairs is almost more important, as they can save you time, money and frustration, especially before or even during a gig. That said, it can be daunting to know what to buy when jumping into the world of soldering, but for less than $80, you can have tools that will last for years.

The godfather of all that is sought after in rack gear; behold, the Soldano SLO Rackmount Amplifier. Those of you that have heard of the SLO (Super Lead Overdrive) already know that this thing can be brutal when it comes to lead tones. Possessing one of the tightest crunch and overdrive channels known to man, the SLO Rackmount is hailed as a grail piece of gear for many guitar players. The SLO-100 offers two channels, Normal and Overdrive, each with independent Preamp gain and Master Volume controls.  A footswitch is also provided for effortless noise-free switching between the two channels.  The Normal channel has a Bright switch and a Clean / Crunch gain selector switch.  Standard features include a tube-buffered effects loop and a slave output.  Bass, Middle, Treble, and Presence controls provide the tone shaping.  From Clapton to Van Halen, from Warren DeMartini to Lou Reed – and from you to Mike Soldano himself, the SLO is simply the player’s choice.

Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.
This is easily the most popular category of effect, and sonically is the natural first-step away from the thin sound of a straight, clean amplified guitar. If a player only owns one pedal, chances are it’s a distortion, fuzz, or booster box, and plenty of players have collections of several or even dozens of units from this genre, and use two or three at a time on their pedalboards for different colors and textures and levels of sonic sizzle. Yep, of the players who want to change their guitar’s pure sound in the first place, more probably want to filth it up than all of the other options combined.
Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.
A direct user interface can give far more musically rewarding results than dozens of parameters, menus and alpha dials. Often, even a panel of knobs isn't anywhere near as natural to play as, say, a Korg Kaoss Pad. Here's something Kaoss Pad 3 owners can try at home: choose effect DL2 (Smooth Delay) in which the pad controls delay time on the X-axis and depth on the Y-axis. Next route your favourite solo patch through it and set the FX depth to about 12 o'clock. Solo wildly whilst simultaneously stroking the top right-hand corner of the Kaoss Pad with short, circular motions. With practice, you should be able to produce delicate pitch sweeps as the delay shifts in time. As you control depth by vertical motion, practise diagonal upwards sweeps followed by vertical downward ones to smoothly dampen the effect. Hey, it takes years to master the violin, so a few evenings spent waggling your finger over flashing LEDs shouldn't be too arduous. Next try the same technique with lush solo pads: simple yet devastatingly effective! Paul Nagle

A better idea is turning to established brands like Maton, Washburn, Epiphone, Fender… there’re plenty of respected manufacturers with long traditions in making guitars. No matter what type of guitar, all these companies have low-priced models that still benefit from the care and craftsmanship you’d expect from well-known brands. Prices start around $150 for basic types, then for $500-700 you’ll find an enormous choice.
The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.

Boost/volume pedal: A boost or "clean boost" pedal amplifies the volume of an instrument by increasing the amplitude of its audio signal. These units are generally used for "boosting" volume during solos and preventing signal loss in long "effects chains". A guitarist switching from rhythm guitar to lead guitar for a guitar solo may use a boost to increase the volume of his or her solo.[59]
The BOSS ME-80 gives you all of the effects needed to create that elusive signature tone. The multi-effects unit is a great way to learn how different effects interact with each other to provide you with crystal-clear tones to fuzzy, thick walls-of-noise. If you have an ME-80, download BOSS Tone Studio for an easy way to experiment and learn these effects, have fun and use your ears to build your best guitar sound.
SJ Series: The SJ is Collings’ version of what is commonly called a small Jumbo. Although the 16 inch lower bout is slightly wider than a dreadnought, and the sides almost as deep, the tight curve at the waist creates in a very different sound chamber. SJs, especially examples in maple, typically have a more pronounced midrange response when compared to a dreadnought.
At the other end of the size extreme sits a shape called the parlour. Parlour acoustics are among the smallest in body size you can buy – not counting the modern ‘baby’ guitars – and are typically favoured by players of more low-key, less brash musical styles like folk and indie. Once again, the guitar’s distinctive shrunken body shape is another invention from the CF Martin guitar house, with the guitar’s neck typically joining the body around the 12th fret.
When buying any instrument don't buy cheap. I've been playing 5 string for 36 yrs. The most important thing in a 5 string is the tone ring with a resonator. many good brands on banjo's. I have a alverez denver belle flat top tone ring, white eagle arch top tone ring but my favorite is a honher Artist flat top tone ring. Regarding a Good acustic guitar my favorite is a martin D-35 ease of play and tone are awesome. The tone is what you are after.
You can divide these further into cabinets and combos. A cabinet is simply an amplifier without a head. The head is all the knobs and so on that can be tweaked to produce variations in tone and volume. Combos include the head, so they're often preferred as they're easier to port around. However, if you want a multi-speaker setup, you'll want to opt for cabinets with separate heads.
Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.

Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.

Foden: In 1912 to 1917, Martin made guitars for concert guitarist William Foden. These are similar to the standard Martin models, but have simple soundhole rings and a 20 fret fingerboard (instead of 19). Made in sizes 0 and 00, the styles were similar to Martin's Style 18, 21, 28, and a pearl trim model. Only 27 of these guitars have been documented to date.
The Custom Classic Telecaster was the Custom Shop version of the American Series Tele, featuring a pair of Classic and Twisted single-coils in the bridge and neck positions, as well as a reverse control plate. Earlier versions made before 2003 featured an American Tele single-coil paired with two Texas Special Strat pickups and 5-way switching. Discontinued in 2009 and replaced by the Custom Deluxe Telecaster series models. The 2011 version of the Custom Shop “Custom Deluxe” Telecaster featured a lightweight Ash body with contoured heel, Birdseye maple neck, and a pickup set that included a Twisted Tele neck pickup and a Seymour Duncan Custom Shop BG-1400 stacked humbucker in the bridge position.
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

This general tip applies to all so-called temporal effects. Anything that messes with the timing of the signal should come last. If you were to put reverb before distortion, which is often one of the first effects in a chain, that distortion would be applied to both the original signal and all of the echoes. In other words, you’d get a mess. Naturally, this isn’t a rule written in stone. There are always exceptions. However, it is best to start with reverb at the end as this is the most neutral position.
To answer this question, all you need to do is close your eyes and focus on what is currently going on around you. Just about every sound you hear, whether you are at home or on a busy street, is packed with some dose of reverb. In nature, sound reflects off of multiple objects and surfaces across various distances. Both our ears and our brains are used to reverb by default. That is one of the reasons why even an artificial reverb effect tends to make a track more enjoyable.
Although Led Zeppelin disbanded in 1980 after drummer John Bonham’s death, they have reunited on a few occasions, most recently in 2007 for a tribute concert in memory of Ahmet Ertegun, who had signed them to Atlantic and launched their career. Page continues to go strong. After reissuing the band’s catalog in 2014 and 2015, he’s promised a new project to come in 2016. We couldn’t be happier, and more eager to hear what he has.
Rock’s ultimate minimalists, Earth reduced heavy-metal thunder to a blissful rumble in the clouds. Their pioneering 1993 drone suite Earth 2 — pulseless, fearless, relentless — was little more than Dylan Carlson’s guitar chugging away on a note or two for 73 monolithic minutes. Relieving metal and grunge from any pretense that wasn’t distortion, menace, or catharsis, Carlson found a headbanger/shoegazer home between the primal and the O)))therworldly.

G&L is the evolution of Fender guitars, no doubt, is Leo Fender expressed by itself, amazing axe, nice sound, in tune, good wood, my ASAT SPECIAL have bird's eye wood on fretboard that looks and feels amazing, the MFD's pickups rocks! nice playability, nice sound, I'll keep mine a lot of a time, it must be on top 10, underrated guitar in my opinion
The Gibson Les Paul was the result of a design collaboration between Gibson Guitar Corporation and the late jazz guitarist and electronics inventor Les Paul. In 1950, with the introduction of the radically innovative Fender Telecaster to the musical market, solid-body electric guitars became a public craze (hollow-body electric guitars have more acoustic resonance but are, therefore, more prone to amplifier feedback and have less natural note duration “sustain”.) In reaction, Gibson Guitar president Ted McCarty brought guitarist Les Paul into the company as a consultant. Les Paul was a respected innovator who had been experimenting with guitar design for years to benefit his own music. In fact, he had hand-built a solid-body prototype called “The Log”, a design widely considered the first solid-body Spanish guitar ever built, as opposed to the “Hawaiian”, or lap-steel guitar. This guitar is known as “The Log” because the solid core is a pine block whose width and depth are a little more than the width of the fretboard; conventional hollow guitar sides were added for shape (Image 2), a design similar to the popular Gibson ES-335 semi-hollowbody guitar introduced in 1958. Although numerous other prototypes and limited-production solid-body models by other makers have since surfaced, it is known that in 1945–1946, Les Paul had approached Gibson with “The Log” prototype, but his solid body design was rejected.[8][9]
Most of the time, a chord diagram will not show you the finger numbers. They will leave that up to you, because different people sometimes play chords differently. Some people cannot play an A chord like this, because their fingers are too big, and this fingering is very cramped for them. Instead, they play an A with a mini-barre, using the same finger for more frets. For example, I could bar my 1st finger across the 4th, and 3rd strings at the second fret, then place my 2nd finger on the 2nd string, second fret (see image on the left). This gives me more room between the frets, and also frees up my 3rd and fourth fingers to pick out melody and bass notes. It’s just a preference, you can play the chord how you prefer.
Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list 

Prince at #10 just shows me that whoever made this list hasn't seen him play that often. And really, KR doesn't even need to be on the top 10. JH is way overrated, yes on the list, but NOT #1. But anyways, cool to see Prince even on the list. Those stupid people writing those comments are probably the ones that say "Prince plays guitar?" They are so living in a box!

The latest in a grand lineage of guitar-based Kings, Marcus [pictured, top] has - without exaggeration - the chops to bear that weighty association. Mentored by ‘Uncle’ Warren Haynes, he was personally tipped to us by Kenny Wayne Shepherd and leads a band of formidable players that seem able to turn on a dime from Miles Davis jazz jam to blues and searing Southern rock. 
Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.

Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.

OK, when the list started it was hard to tell if the author was knowledgeable on the subject because of the automatic “Go To” names. Unfortunately, by the time I got to the end I realized this was the author’s favorites list versus the Top 10 Greatest Guitar Players. Kirk Hammett, Slash, Jack White, Chuck Berry??? You can’t put them on any list and not mention the guy who influenced so many, and who Eric Clapton called the best guitarist in the world, SRV. Richards biggest claim to fame it the amount of drugs he’s done that haven’t killed him,… Read more »
This will only matter to some players (I’m looking at you, lefties), but if you happen to play guitar the non-traditional way (strumming with your left hand and fingering with your right) you may want to pay close attention to brand. Because left handed players are in the minority by a long shot, it can be difficult to find quality guitars of that orientation. If you are on the market for a left handed guitar, you may want to stick to Fender or Epiphone, as they are known to produce quality offerings in that category.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: sx","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"sx","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

{"id": "113478791", "categoryId":"site5ABA", "name":"Vintage 1967 FT90 El Dorado Acoustic Guitar", "pageUrl":"/Used/Epiphone/Vintage-1967-FT90-El-Dorado-Acoustic-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"2,099.99", "priceMin":"2,099.99", "priceMax":"2,099.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"200.00", "priceSavingsMaxPercent":"20,000", "inventory":"1", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"754513965000", "priceVisibility": "", "itemType": "Vintage"}
10. Behringer Ultracoustic ACX450 45-watt ($229.99): Not to leave our acoustic-centric players out of the list entirely, the Behringer Ultracoustic not only looks amazing, but it has a ton of features to keep you inspired and sounding great. Two channels are utilized so while you plug your acoustic into channel one, channel two allows you to input a microphone or another source. The FBQ Feedback Indicators allow you to control the feedback coming out of your amp by monitoring the LEDs on the graphic EQ. Need your own guitar effects? The ACX450 allows for 16 different presets on each channel, including delay and reverb. A great bargain for those looking to take their acoustic playing to the next level!
I have relied on the Sonic Port as a backup rig in case I do have an amp failure. At one point, I kept a Tech 21 PowerEngine 60 on hand to plug my Sonic Port into. Works great for studio and stage work. Again, so much cheaper than AXE-FX which unfortunately, this article plays heavy into spending over $2,000 for the rack mount unit. Don’t forget a decent PA, Monitors, and a Rack to mount it in (another $1000 if not more?). Yea, AXE-FX is sounding worse and worse than bringing a small combo amp..
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
The pickups on an electric guitar can only pick up the vibrations of the string and convert those vibrations into electricity, which is ultimately converted into sound waves that emanate from the speakers. Do the pickups shape the sound? Of course! Can pickups mask the characteristics and make two electric guitars with different tonewoods sound the same? Yes again. So, I guess the correct answer to the question if wood makes a difference in the sound of an electric guitar is “It depends”. A pickup that can’t pick up these subtle overtone differences, enough compression, or other kinds of dynamics-killing processing, will kill the dynamics of any guitar, regardless of tonewood. Does that make it a bad guitar? Not necessarily – it depends on what the musician is after.
Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.

Inspirational, motivational and light background tune with beautiful and atmospheric melody. Good production audio for the slideshow, presentation, youtube, advertising, business project, motivational and successful videos, inspiring moments, bright achievements, film scores. I used electric guitar, muted guitar, piano, staccato strings, bass, drums, Glock, bright pads.

Flat tops from 1970 to present are considered to be excellent utility instruments, but are not collectible. Staring in 1976, Martin has been undergoing many changes with numerous reissues, new models, limited editions, etc. Workmanship has improved greatly from the early 1970's, and Martin is now producing some of its best guitars in over 20 years. While not currently collector's items, these intruments have excellent workmanship, sound, and playability.

At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.
Perhaps the most famous of these sounds—or, at least, the most formative—is that of Dave Davies, the lead guitarist for The Kinks, who got bored of his Elpico amplifier in 1964 and decided to pierce its speaker cone with a razor blade. This effect, known as “clipping,” cuts off the audible waveform at the height of the amplifier’s limits (voltage, current, and thermal), thereby distorting the signal. Although Link Wray had been doing this since the late 1950s, Davies popularized guitar distortion in the first few moments of “You Really Got Me,” changing guitar music.
Generally speaking, the amp market tends to be less fueled than other categories by the year-to-year cycle of new product hype that kicks off at the annual NAMM show in January. While there are always hot new models and brands (Quilter amps being a good recent example), amp sales on Reverb are largely dominated by tried-and-true favorites and good deals on used gear. offers 169 korean electric guitars products. About 86% of these are guitar, 5% are guitar parts & accessories, and 4% are other musical instruments & accessories. A wide variety of korean electric guitars options are available to you, such as paid samples, free samples. There are 169 korean electric guitars suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of korean electric guitars respectively. Korean electric guitars products are most popular in North America, South America, and Eastern Europe. You can ensure product safety by selecting from certified suppliers, including 6 with ISO9001, 4 with FSC, and 1 with GSV certification.
If this were a list of the best electric guitar brands for metal it is very likely Jackson would be near the top. This is a company practically synonymous with metal, and for decades the most extreme players on the planet have looked to Jackson to get the job done. But Jackson also has a strong presence in the rock and hard rock genres, and if that’s your bag you’d be smart to give them a good look.
Epiphone is to Gibson what Squier is to Fender. Meanwhile, the Les Paul is Gibson’s Stratocaster. Probably one of the most famous guitars on the planet, the Les Paul has been played by the likes of Slash, Jimmy Page, and Bob Marley. Epiphone, luckily, has made it available to the world with a price that won’t break the bank. And it’s an excellent guitar for those starting to play rock music.
{"id": "J40301", "skuOrProductId": "J40301", "categoryId":"site1AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Epiphone introduces the Les Paul Special VE (Vintage Edition) electric guitar featuring the classic Les Paul profile with a lightweight Poplar body. The Les Paul Special VE is powered by Epiphone Open Coil humbuckers and is available in beautiful “Vintage Worn” color finishes.

For decades, the Les Paul Special has been one of Epiphone’s best selling electric guitars. And the new Les Paul Special VE—inspired by the Les Paul, the greatest electric guitar in rock—continues the tradition of giving new both players and pros a real Les Paul at a price anyone can afford.

Case sold separately.

Classic Les Paul profile
The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 

Epiphone Open Coil Humbuckers
The Les Paul Special VE features Epiphone’s world famous open-coil humbuckers with a warm 650R in the neck position and a slightly hotter 700T in the bridge or lead position.Controls include a 3-way pickup selector switch, a Master Volume, and a Master Tone control, each with traditional “Black Speed Knobs” pots with long lasting
500K Ω potentiometers.

All-Metal Hardware
Epiphone features all-metal rock solid hardware on all of its instruments. The Les Paul Special VE comes standard with the legendary Locktone Tune-o-matic bridge and Stopbar tailpiece for easy set up. Tuning is fast and reliable with Epiphone Premium Covered tuners with a 14:1 ratio.The higher the ratio, the more accurate your tuning. The tuners are mounted on an Epiphone Clipped Ear headstock with Les Paul Model in gold and the Epiphone log in silver. In addition, a "2016" Edition logo is on the back of the headstock. 

All Epiphones come with a Limited Lifetime Warranty and Gibson’s world famous 24/7/365 Customer Service.", "value":"131.12", "priceMin":"131.12", "priceMax":"149.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"40", "inventory":"57", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.0", "reviewStarRatingInteger":"8", "reviewHowManyReviews":"17", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "Best Seller", "checksum":"93895071200", "priceVisibility": "1"}

After your design has been properly plotted out on the poster board you can cut it out with an exacto knife. Make sure you stay as true to your lines as possible so you have a nice clean line to trace once your ready to. Then lay out the template on body blank and trace away. I like to cut the piece of poster board the same size as the body blank I am using. It makes it a lot easier to line everything up that way. Now you're ready to move on to the next step.
The top of the archtop line featured two very nifty new models called the Vegas 40 and Vegas 66. The Vegas 40 (Teisco Del Rey EP-11T) double-cutaway thinline was promoted both in Japan and the U.S. It was a full size ES-335-style with two pickups (the large rectangular type with chrome sides and black insert, square poles), bound f-holes, volume and tone controls on the lower bout (no plastic plate) and a fancy new angular archtop Bigsby and roller bridge. The pickup selector was a rotary switch on the lower horn with a new round knob with a lever (versus the old chicken beak). The bolt-on neck had a new three-and-three head with a flared “check mark” indentation in the top, with wide wings on either side, a shape that would characterize a number of other models later in the decade. The fingerboard was bound, with dots. On the Japanese version, the headstock carried a zippy new typeface proclaiming “Vegas 40,” while the pickguard used a similar angular script for the Teisco logo. The Teisco Del Rey carried its regular sticker.
The placement of pickups on the guitar's body has a significant influence on the tone they generate. Pickups located near the bridge sample the strings where they have the least overall motion. The result is accentuated treble sounds or "bite." Pickups located nearer the center of the strings—closer to the neck of the guitar—produce a tone characterized by more midrange and bass sounds.
Before I start, I want to mention a few things about this particular guitar. It looks and (potentially) sounds great. The neck plays well too, but it has some tuning problems and buzzes a bit more than I’d like. The tuning problems are coming from two areas. Firstly the nut slots are too tight, made evident by the strings making a pinging noise when they are tuned up or down. This means that it is difficult to fine tune, as the string’s pitch tends to “jump” up or down. The second reason for the tuning issues is that the intonation is way out. By that I mean that the saddles’ forwards/backwards positions are not set up well, and so when the open strings are correctly tuned, and we then play up the neck, it suddenly seems out of tune again.
A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.