If you wanted to wire a 4 conductor Dimarzio or Seymour Duncan in this way, just look at the diagram. Solder the 2 "middle wires" together, tape the connection, then solder the outer wires to the output. Be very careful when working with 4 conductor wiring. The colors and polarity are very important. You could easily make a mistake and wire an "out-of-phase" arrangement which would have low output, a squawky, thin sound AND the humbucker would NOT be hum canceling.
Up next comes another compact model and our second Yamaha recommendation. This time around, we are looking at their Yamaha FSX830C model. Unlike all of the guitars we have mentioned so far, this one isn't a dreadnought. Instead, we are looking at a standard concert shape with a cutaway. Now, you do have the choice of eleven finishes and body types, and since the options are nearly endless we've narrowed down to our favorite configuration, but definitely look at the others, there's some neat options in there.
Copyright © 2016 Sonoma Wire Works. All rights reserved. RiffWorks and the RW Logo, RiffWorld, RiffCaster, RiffLink, RiffRumble, InstantDrummer, StudioTrack and the StudioTrack iPad App Logo, the FourTrack iPhone App Logo, GuitarTone and the GuitarTone Logo, GuitarJack and the GuitarJack logo, DrummerPack, KitPack and Discrete Drums are trademarks of Sonoma Wire Works. DrumCore and KitCore are registered trademarks of Sonoma Wire Works. iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. ReWire and REX2 are technologies licensed from Propellerhead Software. VST is a trademark of Steinberg Media Technologies GmbH. All other trademarks are property of their respective owners.
You are bidding on a previously owned and in good working condition Blackstar Amplification HT Studio 20H guitar amp head. This auction is for the amp and power cable you see pictured. No footswitch is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. This unit has some scuffs and dings from being moved around. It has been tested and is in good working condition.
The taper of a potentiometer indicates how the output to input voltage ratio will change with respect to the shaft rotation. The two taper curves below are examples of the two most common guitar pot tapers as they would be seen on a manufacturer data sheet. The rotational travel refers to turning the potentiometer shaft clockwise from 0° to 300° as in the previous visual representation drawing.
Over the years, many guitarists have made the Telecaster their signature instrument. In the early days, country session musicians were drawn to this instrument designed for the “working musician”. These included The King of the Tele Roy Buchanan, Buck Owens, Guthrie Thomas, Waylon Jennings, James Burton who played with Ricky Nelson, Elvis Presley, andMerle Haggard (a Signature Telecaster model player himself). Burton’s favorite guitar was his Pink Paisley (or Paisley Red) model Telecaster. Later, Danny Gatton blended diverse musical styles (including blues, rockabilly and bebop) and became known as the “telemaster”. Eric Clapton used a Telecaster during his stint with The Yardbirds, and also played a custom Telecaster fitted with Brownie‘s neck while with Blind Faith. Roy Buchanan and Albert Collins proved the Telecaster equally suited for playing the blues. Muddy Waters also consistently used the Telecaster and Mike Bloomfield also used the guitar on his earlier works. Soul sessionist Steve Cropper used a Tele with Booker T. and the M.G.’s, Sam and Dave, Otis Redding and countless other soul and blues acts.
Interestingly, the neck is crafted from maple, topped by a 20-fret walnut fingerboard which complements the back and sides nicely. Following the specs of older Gibson guitars, the scale length is shorter at 24.75", while the nut width is 1.725", which gives the instrument a comfortable playing feel. Adding to the already good vale of this guitar is the built-in LR Baggs Element electronics for stage performance, with discrete soundhole mounted volume control. If you are looking for a handcrafted workhorse acoustic guitar that will not break the bank, then check this out.
For beginners, it’s important to have a guitar that is easy to play and stays in tune. But cosmetics, body style, electronics, and tone matter too. Often, a beginner may have a favorite guitarist who inspires them to play. Check out what guitars their heroes play and try to aim for something similar. Your budding country star may not be very enthusiastic about the pointy guitar with skulls, but they will probably fall in love with a classic. (Don't worry if some of these terms are unfamiliar—we'll address them below.) You may choose something different, but this is a good starting point in determining which guitar is likely to inspire your up-and-coming guitar prodigy.
A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.
The benefit of a compressor lies in that every note played will be at nearly the same amplitude, and therefore nearly equal in volume. This will help normalize tones that are sometimes lost in the mix because of complex overtones, and it will result in a more articulate sound. Notice that if you don’t pick all notes of an arpeggio at exactly the same pressure you will likely get a different sound for each note, especially if you are playing a tube amp. Tube amplifiers react dynamically to stronger and weaker signals it’s the allure of them and thus the non-uniformity of picking at different strengths will be exaggerated. A compressor will fix this problem and normalize all notes of the arpeggio regardless of the player’s technique and equipment, which is consequently why many soloists prefer them.
Second in your chain are usually wah or EQ pedals. These tend to do well when directly affecting a distorted signal, and without much else in the mix. If you plan on using a compressor you have a choice: for a more natural rock tone, the compressor works best right after the distortion or wah/EQ effects. If you’re going for that thick classic country sound however, try putting your compressor right at the end of the chain so that it squashes everything.
Other Archtone owners may notice a slightly different model number, but with the exception of a tenor version, the only difference is the finish. The H1213 (your model) was finished with a shaded-brown sunburst, the H1214 was ivory-colored with a flame effect, and the H1215 was a sunburst with a grained effect. In excellent condition, this model is worth between $200 and $250 today. But in the average condition yours appears to be, it’s worth between $100 and $150.
And how does adding a pedal, basically one more optional pre-amplification stage that you can turn on or off at your leisure, make somebody less “real”? Imagine some old-school guy is just using guitar to a (insert amp brand)? Great! I love them too. Which one? Ah, nice amp! Did they know that amp has one more gain stage than that amp over there? If I plug into that one while they play theirs, did I make them less real or genuine, or did I become SUPER-real? Are they going to start fading like Marty McFly when the outcome is in doubt at the end of Back To The Future? Will they spring back to life and start playing “Earth Angel” properly once I unplug?
At the current time, the questions who really invented the electric guitar and why can’t be answered straightforwardly, as there is no clear answer to them. On the one hand, some people argue that the electric guitar was invented in 1931 by George Beauchamp with the help of Paul Barth and Harry Watson. At the time of the invention, Beauchamp was the general manager of the famous National Guitar Corporation.
Our list of best electric guitar brands will remain incomplete if we do not add Schecter in it. Schecter Guitar Research is a firm that evolved from a startup into a guitar giant during the recent years. Aimed mainly at the heavy metal side, Schecter produces several guitars that metal players look. However, players from all genres will find something of their wish at Schecter as it touches every side of this domain. Created with the utmost care, delicacy, and artisanship, these guitars exhibit the most amazing and high-end features that suffice to surpass most expensive brands in the market today.
Pitch Bend/Shifting: From a simple octave above the note you’re playing or at intervals in between, a pitch shifter effects pedal will change the pitch of your note or chord. More sophisticated pitch shifters create two or more harmony notes so you can accompany your root note for a fuller sound. Some simulate a chorus effect by providing minute shifts in pitch.
The first “production” electrics were made by Stromberg-Voisinet in Chicago in 1928 under the direction of Henry Kay “Hank” Kuhrmeyer, soon to be president of the company which would shortly be renamed the Kay Musical Instrument Company. S-V developed the first commercially viable (more or less) pickup and amplifier. The pickup – we’ve yet to see one so an accurate description is impossible at this point in time – was probably a quasi-transducer which probably adapted phono cartridge or telephone receiver technology. It was placed on S-V’s two-pointed Venetian-shaped acoustic guitars and was greeted with great ballyhoo in the music trade press. The amp was produced before the development of preamp tubes, and was undoubtedly very primitive (there is no mention of even volume controls), and probably not particularly loud (though, of course, listeners had nothing to compare). Apparently, the reality didn’t live up to the hype, because Kuhrmeyer later suggested than only a few hundred of these guitars were actually made, and mention of them evaporates after 1928, likely done in by a combination of lack of performance and the upcoming Great Depression, which descended in 1929.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
Living Colour’s Vernon Reid agrees but also speaks to a larger shift. He remembers being inspired when he heard Santana on the radio. “There was a culture of guitar playing, and music was central,” adds Reid, 58. “A record would come out and you would hear about that record, and you would make the journey. There was a certain investment in time and resources.”
Capacitors used in guitar circuits aren’t polarised, so it doesn’t matter which way round you fit the legs - we normally go with the printed side facing out from the pot. They’re measured in microfarads (uF) and will be marked with a number. You can experiment with different values and materials for different results, but if in doubt, just swap it for what you already have.
Technology is not based on good materials and dexterity alone. It's how you finish your work that counts. It's the little details that you labour over until it's just right. It's an arduous process of creating and destroying and rebuilding until its perfect; until there's nothing left to add, and nothing left to take away. Then it's ready. Swing is well known for its attention to detail in our incredible Custom Shop models, but what you may not know, is that we make no distinction between them and our retail guitars. They all receive the same exacting standard we demand of any product that carries the name "Swing". Our attention to quality and detail costs us more than what other manufacturers consider as an adequate alternative. We do not take shortcuts with every detail because we have found that the careful, educated player can hear those shortcuts. Again, it shouldn't come as surprise though, it's really the only explanation why after only 2 years in business we rose to become #1, and have stayed there for three years and counting.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.
Semi-hollow, slim, and designed with a comfortable ‘C’ shape exterior, the D’Angelico EX-DC Standard is a high-price electric guitar with professional grade features. Creating a more natural tone that delivers an organic quality to its sound, the Standard guitar uses Kent Armstrong Vintage humbuckers for a focused sound free of excess reverberation. The Super-Rotomatic tuners maintain their tuning accuracy for a longer time, due in part to the turning radius within the design. Strings remain at a comfortable tension due to the unique Stairstep tailpiece, creating both a strong resonant sound and assured sturdiness. A semi-hollow body designed with maple on the top and back, other features include a 3-way toggle that provides two modes of volume as well as two separate tones. Meant for use throughout various genres of music, the EX-DC Standard is an electric guitar to please the masses.
“Move up to Alnico IV and the power rating comes up and the frequency response flattens out – you get a balanced and natural- sounding response from the coils, but not so it’s boosting the treble. The mid-range stays quite constant as well. And then you go to Alnico V, which has the highest power. Then the bass and treble do get boosted and the sound starts to get more aggressive – more ‘rock ’n’ roll’, for want of a better term.
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved sruce top, back is not carved but is arched by bracing, rosewood back and sides, unbound elevated tortoise pickguard, style 28 type multiple bound top and back with white outer layer, zipper zigzag backstripe, trapeze tail piece, rosewood fingerboard, vertical "Martin" peghead logo, nickel plated parts, sunburst top finish.
I had a single-minded desire for single-ended tone, but I didn’t want to drop insane moolah on a tweed Champ (or any of the tweed Champ clones out there, or even a tweed Champ kit), cool as they may be. Heck, even a Silverface Champ is going to set you back in the $300+ range these days. And it’s a Fender. Dependable? Yup. Great sounding? Sure. But no one is going to see it and say, “What the hell is that?” Which is part of the fun for those of us involved in the weirdoes and freakazoids of the gear world.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks. Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.
A pedal itself can have an effects loop, but the most commonly used place is on the amplifier itself. You'll see on most amps (but not all) some form of output labeled as Effects Send or Preamp Out accompanied by an input labeled Effects Return or Power Amp In, respectively. Both sets of outputs and inputs refer to the effects loop that you can add between the preamplifier and the power amp section of your amplifier.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
If you see a "\n/," where n = some number, perform a tremolo bar dip. Quickly hit and release the bar to dip the note's pitch. The number between the slashes gives an indication of the pitch you should dip to - dip the pitch by "n" semitones (a semitone is the same as the pitch between two adjacent frets.) For instance, "\5/" means to drop the pitch by 5 semitones, which will be the same tone as 5 frets below the original note.
In 1960, Gibson experienced a decline in electric guitar sales due to their high prices and strong competition from Fender’s comparable but much lighter double-cutaway design, the Stratocaster. In response, Gibson modified the Les Paul line. This 1961 issue Les Paul guitar was thinner and much lighter than the earlier models, with two sharply pointed cutaways and a vibrato system. However, the redesign was done without Les Paul’s knowledge. Although pleased with the sound, he asked Gibson to remove his name from the instrument until they fixed a design issue with the neck. This separation occurred in 1960, but Gibson had a surplus stock of “Les Paul” logos and truss rod covers, and so continued to use the Les Paul name until 1963. At that point, the SG guitar’s name was finally changed to “SG“, which stood simply for Solid Guitar. In addition to the SG line, Gibson continued to issue the less expensive Jrs and Specials (and the Melody Makers) with the newer body style. These, together with the Firebird, were the standard Gibson solid-body models until the reintroduction of the Les Paul Standard Goldtop and the Les Paul Custom guitars to the market in 1968.
List of electric guitar brands that include the most reliable models available. Electric guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best electric guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
I am a learning myself Shreya.I purchased a Fender Model CF60 (£100) .This is a high quality "Folk guitar" from a reputable long standing company.It's got a lovely mellow tone and the size is not to big.Buld quality is excellent.At the end of the day it's all subjective.I recommend you go to your local musical instrument shop and try a few.All the Best Dean
The original dreadnought shape was launched by CF Martin, one of the big names in acoustic guitars, and was named after an old English warship. It features rounded shoulders, and the neck typically joins the body around the 14th fret. The dreadnought strikes the most even balance between volume, size and ease of playing, and for this reason it has been used by just about every big-named player you can think of.
While Gibson are the creators of the original J2000 jumbo-sized acoustics, the company’s reasonably priced sister company Epiphone do a range of acoustics which are perfect for players looking to dip their toes in the water. The Epiphone EJ2000 is identical in dimensions and appearance to its more costly sibling, yet offers the perfect entry guitar for budding rhythm players.
The exciting thing about the Kemper is that you can use it to capture the sound of your JTM45, right where it hits that sweet spot, with the microphone you prefer and that mic preamp that just adds a certain something. Then you can refine the 'profile' you've made while A/B-ing the digital signal with the original using the Kemper's onboard EQ, and save the sound alongside the library of 200 or so profiles that comes pre-loaded, with access to hundreds more via the Rig Exchange section of the Kemper website. If you fancy a little more spice you can clean up or crank the KPA's onboard gain control to go way beyond the level of drive available on your original amp, adjust sag, tweak the audible effects of pick attack and even, thanks to what Kemper claims is "digital alchemy", alter the size of your virtual cabinet from a huge stack right down to a cigarette packet, while there's also a fully loaded set of effects. We've heard various approaches to digital modelling sound good in the studio before but this is as close to a 'real' mic'd valve amp sound as to be indistinguishable. If you're the type of guitarist who records regularly, or a producer who wants 24/7 access to a personal library of refined and tested guitar sounds wherever you happen to be on the planet at any given time, the Kemper Profiling Amp is the product of the decade so far.
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
The size and power rating of the amp, as well as the size and type of the speakers within the cabinet, will have a significant impact on the recorded sound. Obviously, huge stacks will produce a very different sound from small combos. That said, many recording engineers have found that a small, low-powered amp cranked right up can sound more exciting than a big powerhouse. Even cheap transistor amps with tiny speakers can sound great in the right context. Don’t be precious and don’t rule anything out; it’s all about the end result!
The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws.
The 1934-’35 Dobro Hawaiian had the relief sections around a round central bridge/pickup “cover” with a Dobro “lyre” logo between the pickup and the neck. The more-or-less rounded lower bout (cutout at the butt) culminated in two little pointed shoulders, which then tape into the neck, giving it an almost “Spanish” look if you squint and ignore the cast designs. The tapered head had two cutouts in the middle and a triple-stepped top extended on the bass side. The principal difference between this earliest Dobro and the one shown in Gruhn/Carter is the tailpiece, which was a curved, cast-in affair, unlike the rectangular tail on the later version. Also, the side relief panels are painted black, with the whole thing clear-coated to seal it. On this first Dobro electric lap there is no volume control. The jack is on the but, in the bottom cutout, next to the strap button.
Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.