Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.

The guitar sports an AAA flame maple top on a three-piece mahogany body, whose Translucent Black finish was picked by the man in the top hat himself. The iconic Firebird pickguard sits prominently on the axe, but this one features Slash’s “Skull & Top Hat” logo. The mahogany neck comes in a custom profile, too, which is rounded but slim enough for searing fretwork. A pau ferro fingerboard with trapezoid pearl inlays completes the cosmetic concerns on the axe.

With the Seagull S6 Classic, you get an acoustic-electric guitar that comes with a solid design and an impressive sound that will delight, regardless if you’re playing it unplugged or through an amplifier or PA. This model features a cedar top that has been tested for pressure resistance, so you know you have a tough guitar on your hands to use for many years.
Make sure you have a sharp pair of wire cutters and a pair of those pointy nose pliers for bending and cutting component leads. Don’t forget solder too. There are a whole bunch of solder specifications covering materials, size, process etc. You’ll need rosin core solder. It comes in different thicknesses. 0.031” diameter is a common size, and will work for most pedal projects. Solder is normally sold in reels by weight. A 1/4lb reel will be enough to last a good few pedal projects. Lastly, get lead free, no clean solder. Although not strictly necessary for personal projects, lead-free solder is common now and safer. No clean, means that you can leave the flux residue behind without having to clean it off, and it won’t damage your board.
It is nice that it starts easy and progresses as you improve, but there are some catches. If you are really good, you will be annoyed at the pace it adds new material. It also can be frustrating when it adds a few extra notes, you are caught of guard, it takes them away, and you have to play through the song a few times to get them back- at which time they catch you off guard again. I wish you could opt to lock them in, or just reveal all.

The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.
With analogue delay (and simulations thereof), each subsequent echo is not only quieter, but also more distorted. Dub reggae tracks often make prominent use of this effect -- look out for the effect where the engineer momentarily turns a knob so that the echoes get louder instead of quieter, surging and distorting before he turns it back down again so they can die away.
Scale length describes the length that string has to be stretched on, from the nut to the bridge. Generally speaking, shorter scale length means softer string tension, making the instrument easier to play. Longer scale length allows for more fret space and more string tension which translates to more sustain. Shorter scale length is advisable for beginners, while experienced players ought to look for guitars with similar scale lengths so the playing feel stays the same even when switching between instruments. Nut width measures how wide the nut is, smaller means easier to play for players with smaller fingers, while wider nut widths allow for more space between each string. Finally, neck profile is the shape or curvature of the back of the neck, and the type of profile you want will depend on your preference, be it vintage style U profile with its fatter neck, or the more modern slim profiles.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: sx","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"sx","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
We perform within include rings. Personal big assortment of pedals, a few I really like, a few foul odor. I quickly discovered how the just people who worry about the results tend to be additional music artists. The actual people( ladies dance mostly) might treatment much less. Therefore right now I acquired the tuner, as well as generate your pedal with regard to single sculpt.... that is this, as well as my personal sculpt rocks ! as well as straight forward. With regard to facilities felines it might be another tale.
By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.

Considering a brand is only really important to a certain extent. Generally, certain top brands will have a reputation for being better at things than others, but given that most guitar brands now have a very wide offering, it’s really best to consider individual models. It’s worth doing a little extra research in some areas though, because there are interesting brand relationships that mean some more budget guitar brands have actually been designed by premium ones. Epiphone and Squier for instance are more affordable sub-brands of Gibson and Fender respectively, which means that you can often get a very high quality product that’s been made in Taiwan rather than the USA for instance. The Dove Pro is a good example of this.

That’s not an overstatement, as traces of T-Bone’s influence can be heard in the early recordings of Albert, B.B. and Freddie King, Muddy Waters, and especially Chuck Berry, who adopted many of Walker’s signature licks as his own. A sharp-dressed, flamboyant performer who played the guitar behind his head and did the splits without missing a note, Walker helped reposition the guitar player from the sidelines to center stage, inspiring Buddy Guy, Jimi Hendrix and Stevie Ray Vaughan to copy his impossible-to-ignore moves.

I sold my fender squier stratacaster for this guitar.when I opened the box it was so beautiful nothing like what pictured showed. Easy to tune and the amp is wanderful. This guitar comes with great surprises as well. Gibson has done it again. This guitar is great for a beginner. The only flaw is that it doesn't have a pick guard but those are cheap to buy. Would buy again.

If there is one body shape out there that everyone will recognize, it is this one. In terms of finish, Fender chose a lacquer clear coat to show off the natural wood instead of their usual choice, and it looks pretty awesome (of course there's a 3 tone sunburst and olympic white too). Made of ash, this particular Strat offers a U-shaped maple neck with a maple fretboard that is bolted onto the body. In terms of pickups, we have a set of three single coils belonging to their vintage line. These come with Alnico magnets, giving you that classic tone we all love so much. The hardware follows the canon as well. Here we have Fender's well known synchronized tremolo bridge paired with a set of F tuners on the headstock.

The combination of Slash’s rough-edged pyrotechnic solos and Izzy’s raw power chords and off-kilter rhythms resulted in an unusual mish-mash with massive crossover appeal that metalheads, punks, glam poseurs, pop fans and classic rockers loved alike. Slash and Izzy also made vintage guitars cool again, strapping on Gibson Les Pauls, Telecasters and ES-175 hollowbodies when most guitarists were playing DayGlo superstrats, pointy metal weapons or minimalist headstock-less Stein-bortions.

Kawais are probably most often mistaken for Teiscos because Kawai bought the Teisco brand name in 1967 and continued to make familiar Teisco guitars, while adding new models every year. Though sometimes sharing some similar looks, Kawai guitars tend to be a bit inferior to original Teisco guitars, especially when it comes to the wiring and pickups.
STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.
So when you plugged your guitar in and tried to play it electrified, you couldn't get any bass tone out of the guitar-the bass strings didn't go over the polepieces of the pickups! When you tried to fret notes along the low E string, your fingers would fall off of the fretboard. That one error turned an otherwise beautiful, comfortable and very functional instrument into something that played and sounded like crap.
There is no right or wrong answer when choosing a guitar. Choose whichever guitar suits your style. If you are inspired by electric guitar players, you may want to follow suit. If unplugged acoustic sounds tend to be what you enjoy most, then the acoustic guitar is the right choice for you. If you’re still not sure, make a list of ten bands or artists whose styles you’d like to emulate. If the list is predominantly electric, go electric. If it’s acoustic, then go acoustic.
Even though the Orange Amps were still neither of the Top of of all lists because the Fender and the Marshall are amongst well known amplifiers for its individual claims in both patent and innovated in each technologies, (Fender corporation claims its first solid body elecric guitar to been market in mass productions and patents, whilst the other one Marshall claims either in terms truest guitar amplifications that also in mass production, so on Marshall claims a patent innovation itself and both of them were been a major direct suppliers on every famous music artists in every decades of music revolutions, on the other hands, the top spots of their hardship innovations were be at their hands, until to theIR last steps of their innovations, let the famous artists decide their demand at their hands whilst on the other side, Orange produces amps with considering a reasonable market on its considerably fine quality products because, the top spots were be still at working, and it means, ...more
Then there's the issue of valves. Serious guitar players invariably prefer the sound of valve amplifiers to any form of solid-state circuitry, but the technical reasons are not as obvious as you might imagine. We all know that valves distort nicely when driven hard, but the use of output transformers also affects the sound. Then there's the choice of Class-A or Class-B (sometimes referred to as AB) power stages — Class-A stages clip asymmetrically whereas Class-B power stages tend to clip symmetrically. Even the make of valve has an effect, as do technical issues such as the choice of triode or pentode output valves, or even the types of capacitor used in the circuit. Because there are so many variables, not including the most important one (playing technique), the electric guitar is capable of a vast tonal range.
I said to the guy who greeted me at the door: "I'm looking to my buy very first acoustic guitar." And felt a little nervous not knowing anything about playing. Handed him my note card of guitars and he led me into a practice room where he brought the guitars I was interested in and played them for me (since I had zerrrrrooo experience) so I could hear the tone of the guitars. He was very professional, and also took his time making sure that I picked a guitar that I liked. Even gave me a little history about where they are made and how the company sources their wood, etc. Very nice! I forgot his name, but he had curly blonde hair. (If you read this, Hi! And thank you).
There have been two documented 1970 Brazilian rosewood D-28's, which are anomalies. The first one was #265783, which was retopped with red spruce in 1993. The second one is serial number 265941. There are several D-35's with mixed woods in the 3-piece back. Like D-35 #258962, which has a Brazilian rosewood center wedge in the back. Note some post-1969 Martins have some Brazilian rosewood, in the bridge, bridgeplate, fingerboard, or peghead veneer.
as an old school country picker i prefer the fender tele for the crisp twangy sound and also the feel of the fingerboard. I find a strat to be poorly designed with the volume control badly in the way to say nothing about the clumsy tremelo arm. I have modified some strats and made them playable for my slyle.A humbucker in the neck position on a tele is rite sharp for the blues.As for gibson they make a fine instrument,just not my style.

Our pick here is the PAC112V version, for a few reasons. First off, the solid alder body offers you the same tonewood you’ll find in a lot of higher end S-style guitars. The maple neck and diecast tuners will feel really premium in your hands, too. But the 112 series further boosts its value with two Alnico V single coil pickups and an Alnico V humbucker. The addition of the humbucker in the bridge position will open up a whole other world of tones for a budding musician, giving the option for both clean, crisp single coil sounds and thick, high-output humbucker growls.
3/4 guitars are fine for children under the age of 11, or as travel guitars, but if you want to learn properly, then buy a full-size guitar at the start. I started on a full-size classical guitar right back when I was knee-high to a grasshopper; initially, it's hard, but your fingers adapt fast enough and you will soon develop flexibility and dexterity. For children under 11, a 3/4 guitar is an option, but even then I still feel that full-size is better. Check out all the amazing 6-year-old kids playing amazing stuff on the internet, 9 times out of 10 they are playing full-size instruments.

However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.
iGuide?is here to provide the platform and tools to enable researchers and collectors to share knowledge. Anyone can contribute to the WIKI. Upload images, improve descriptions, update pricing, add auction results and "Real Market Data", add missing pages, and so on. If you see something wrong, fix it. If you see something missing, add it. Read more about our vision of a community of shared information in our Knowledge Manifesto. Then, read our Community Guidelines.

ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
The very first thing to remember about pickups is that the active option is not necessarily better than the passive choice, and vice versa. Each type brings its own set of drawbacks and benefits. Passive pickups might be limited in terms of signal strength and tone shaping, but they are much more expressive in comparison to the active pickups in terms of picking and strumming intensities.

There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
Mr. Bojangles,Nitty Gritty Dirt Band, Leaving on a Jet Plane, John Denver, City of New Orleans,Steve Goodman, Alice’s Restaurant & Motorcycle song, Arlo Guthrie, Bobby McGee, Janis Joplin, Taxi, Harry Chapin, Please Come To Boston, Dave Loggins, Lady, Little River Band, Sailing, Christopher Cross, Lookin’ Out My Back Door, Credence Clear Water Revival.
But narrower frets were also used on Gibson Les Pauls prior to 1959, so their characteristics apply to these guitars as well. Does a ’57 goldtop with PAFs sound thin or whimpy thanks to its narrow fret wire? Not likely, largely because so many other factors also affect its tone—body woods, set-neck construction, scale length, pickups— and the impact of narrow-gauge frets doesn’t outweigh any of them. It does, however, influence the overall sonic stew of guitars of that era, which is always the product of many different ingredients.
Epiphone does a great job of making instruments for all levels of guitar players, especially those looking for affordable acoustic and electric instruments. Epiphone is owned by Gibson, and therefore can make official copies of Gibson guitars like the Les Paul, SG and Hummingbird. Many are good enough for pro players to use in the studio or onstage.
In the 1950's company called Don Noble and Co, was founded in the 1950’s by Don Noble, a well-known accordion player and entrepreneur.  He began by importing Italian made musical instruments, mainly accordions, in an era when the "stomach Steinway" was very popular and accordions were being sold door-to-door, and accordion academies were common in most larger cities. But he also imported guitars under the Noble brand name.
I found myself un-obligated, bored and holding a fist full of cash one Friday afternoon, so I wandered into my local guitar shop. With a new found love of single coil pickups I had been eyeballing the Gretsch and Guild hollow bodies unfortunately too poor to actually buy one. On this afternoon, however, I played the Godin 5th Avenue Kingpin. It was love at first strum. Mine is called Cognac Burst. The satin finish on these instruments is beautiful, and give it a vintage, played look. This guitar has a really nice feel in terms of the neck and the thickness of the body. I have fairly long fingers and the neck is comfortable to play. It feels to me, a bit like the thicker necks on the Les Pauls of the late 50s. When I got the guitar, the shop said they'd dial it in for me for free, but frankly, I have no complaints as it is. With the classic style floating bridge you can drop the action impossibly low before you start to get fret buzz. After I brought mine home, I did just that and it plays like a dream. The frets are finished well and there is a bevel on the edge of the fret board and frets that keep them out of the way if you're in the habit of sliding your hand up and down the neck quickly. The Kingpin has a warm mellow tone when unplugged that is perfect for playing jazz and blues. I also enjoy the lower volume of the guitar since it has f holes when I play later in the evening. Plugged in, the P90 kills and sounds good clean and driven. It also retains that warm, mellow tone when played without distortion. I haven't had any trouble with feedback as I tend to keep the volume a bit lower for small spaces. My one complaint is the hideously ugly case, that costs 80 bucks. It's like its made of extra tough styrofoam. I understand they were going for lightness, but it's just ugly. All in all though, this guitar is a great choice and plays as well as my Gibson Les Paul and my buddies Gretsch 51... whatever.
Daisy Rock? Sounds like guitars for girls or something. It is! Daisy Rock is a company dedicated to empowering girls and young women and giving them the resources they need to learn to play the guitar. They have starter, short-scale acoustic guitars for little girls, and some really cool electric guitars in the shapes of hearts, butterflies, and flowers.

This company slowly merged into Hoshino/Tama but prior to their unification, produced instruments with the Star badge, mainly drums. They also produced guitars, including the infamous Zim-Gar badged electric and acoustic guitars. Over time, drum production was segmented to Pearl, while guitar contracts were taken up by Tama. Zim-Gar production was relatively short, as these were budget guitars made for K-mart between 1962 and 1968.

Midlands trio The Bad Flowers make a concise, bruising power-blues that will appeal to fans of the likes of Jared James Nichols and Blues Pills, both of whom have offered TBF support slots. September single Thunder Child is the first shot fired from their forthcoming debut Starting Gun and packs an uproarious solo that leaves TG reaching for our wah pedal. Think Rory Gallagher through AC/DC’s amp stack and you’re near Tom’s bar-fight-scrapping lead sound.
Fuzz gained much glory from the sixties and seventies when popularized by musicians such as Jimi Hendrix. Today, fuzz pedals have evolved into a staple for some bands and is capable of producing everything from a singing, warm sustain to a scratchy, velcro sound. The mainstay of a fuzz pedal's sound is produced by an electrical component called a transistor. Fuzz pedals today can be created from silicon transistors, or germanium transistors. Silicon is known to produce a slightly harsh or bright sound (some consider it sterile) while germanium typically accentuates the low end and produces a warmer sound. Just as extreme settings on a silicon fuzz pedal can easily produce a harsh, glass-like sound, extreme settings on a germanium transistor based fuzz can produce an overly warm, and muted tone.
Gibson did not take Fender too seriously at first; Fender were just an amplifier company that made a few guitars. They didn't regard the solid-body Broadcaster launched in 1950 as a serious musical instrument, lacking the depth of tone of a Gibson electric-acoustic. But music was changing, guitarists wanted different sounds, and music was getting louder. Fenders instruments proved to be more appropriate for the emerging musical scenes. Over the next decade Fender created a number of solid-body guitars that defined genres. Guitars like the Stratocaster, Telecaster and Precision and Jazz basses proved to be exceptionally popular and have stayed in production ever since.
You’ll find a full slate of dedicated bass stompbox effects as well as many multi-effects pedals and processors. Like their guitar-friendly cousins, bass effects offer most of the same tone shaping capabilities, including chorus, reverbs, delays, phasers, and tremolos. Because of the bass’s unique sound dynamics that reach deep into the lower frequencies, many bass effects are focused around compression and limiters that help keep a lid on destructive subsonic sound waves that can damage gear. Typically, many guitar effects are not optimal when used with a bass.
The Squier Affinity series is a great beginner instrument. All of the bodies & necks have been CNC manufactured, so they are consistent and solidly built. In recent years, Fender has completely re-hauled the Squier series of instruments to make them decent introductory level instruments, at a great introductory cost to the beginner player. You can choose from Strats, Teles and even Jazzmaster style guitars!

We are going to start with a Fender amplifier. This Mustang I V2 is a 20-watt combo amp that has won over hearts of a lot of players because of its ease of use and versatility. With one channel that has 24 presets and eighteen amp models you won’t be scrambling for diversity. Apart from that, of course, you get some of the major controls like Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save, Exit and Tap Tempo. The size and price of this model really do not do it justice (I mean, don’t make it more pricey but still). You also will find that this amp features USB connectivity, chromatic tuner and black textured vinyl covering with silver grille cloth that accentuates the simple and elegant look of this model. While 20-watt, as you might know, is not much (unless it’s a tube amplifier) this baby is pretty great if you want it for practice.
Let’s not beat around the bush. The accessories that come with this package (tuner, amp) aren’t the greatest. But they make do. The REAL strength of this package lies solely with the guitar. The guitar is fantastic. Super easy to play (and thus play fast), and to learn on. I’ll explain why that’s important later on. But bottom line, this is a great choice if you want a quick all-in-one package that includes a great guitar.
Several years later, Gibson issued its third Jimmy Page Signature guitar, this one based closely on Jimmy Page’s #2. Issued in a production run of 325 guitars, the guitar more accurately reproduced Page’s heavily modified No. 2 than the original Signature model of the 1990s, and featured the 4 push-pull pots, the two mini-switches under the pick guard, accurate tuners and sound-accurate pickups (the same pickups that were used in the 2005 Jimmy Page No. 1 Signature), as well as an accurate neck profile. As in the original Signature model of the 1990s, pulling up the neck or bridge volume pots switched the respective pickups’ coils from series to parallel, and pulling up the tone pots switched the respective pickups from humbucking to single coil. The two push-button DPDT switches mounted beneath the pickguard provide universal switching functions, regardless of the positions of the push-pull pots. With the switch mounted toward the bridge-end of the pickguard in the out position, the bridge pickup’s phase is reversed. With the switch mounted toward the neck-end of the pickguard in the out position, both pickups are wired in series and out of phase. With both switches out, both pickups are in series and in phase. The Jimmy Page “Number Two” Les Paul is finished with a sunburst finish to replicate the appearance of the original guitar. 325 of these guitars were made, with the initial 25 being autographed by Jimmy Page and priced at US$25,000 when new.
From what I've been able to find out (as a proud owner of a mint W-415 'Dove' model acoustic), Lyle guitars are actually Gibson seconds, that for whatever reason didn't pass muster to be sold as a Gibson (bad finish, scuff, imperfection in the wood, etc.). The Lyle company was out of Portland, OR (I believe) and was started by former Gibson employees who would fix the flawed Gibsons and resell them under the Lyle name. Made in Japan was because Gibsons were made in Japan at the time(?). A damn fine instrument; considered rare now, I guess. I don't ever want to get rid of mine!
Just as it’s important that the guitar, amp and effects are performing to spec, make sure that all cables are functioning properly (it’s uncanny how many times a lead that was working fine yesterday suddenly develops a fault just before a take). It’s a good idea to ensure that spares are available. That goes for strings, too – valuable recording time can be lost just because a string has broken and no one has a spare. Some engineers will try to insist you use brand new strings when recording, but don’t be bullied into it if you prefer the warmer sound of a played-in set; that applies especially to bass, as new bass strings can introduce undesirable harmonic content into the sound.

Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please
The Line 6 POD Farm program is famous for its amp simulation, however many users have realized that the quality of its modeled effects are equally superb. Some even use the POD Farm strictly for its effects! It has a huge collection of FX - up to 94 - and it modeled some of the most popular stompboxes including the MXR Phase 90, ProCo Rat, Uni-Vibe, Arbiter Fuzz Face and Big Muff Pi. It also includes modeled versions of old analog devices like the EP-1 Echoplex. Setting up is a breeze with its simple carousel-style interface, which lets you visualize your signal chain. Current Retail Price $49.00
Scott Knickelbine began writing professionally in 1977. He is the author of 34 books and his work has appeared in hundreds of publications, including "The New York Times," "The Milwaukee Sentinel," "Architecture" and "Video Times." He has written in the fields of education, health, electronics, architecture and construction. Knickelbine received a Bachelor of Arts cum laude in journalism from the University of Minnesota.
The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
From 1959 to 1967, the Stratocaster was made with a rosewood fretboard as standard, as well as color choices other than sunburst, including a variety of colorful car-like paint jobs that appealed to the nascent surfer and hot-rod culture, pioneered by such bands as the Surfaris,the Ventures and the Beach Boys. Fender would paint any guitar from the DuPont car color range for 5% over purchase price.
A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
Considering a brand is only really important to a certain extent. Generally, certain top brands will have a reputation for being better at things than others, but given that most guitar brands now have a very wide offering, it’s really best to consider individual models. It’s worth doing a little extra research in some areas though, because there are interesting brand relationships that mean some more budget guitar brands have actually been designed by premium ones. Epiphone and Squier for instance are more affordable sub-brands of Gibson and Fender respectively, which means that you can often get a very high quality product that’s been made in Taiwan rather than the USA for instance. The Dove Pro is a good example of this.
I'm having a few buddies over to jam this coming Sunday. I don't have a full drum kit setup at my house, so our drummer will be using djembes, bongos, etc. To make things a little more manageable I'm telling folks to bring their electric guitars and NO effects. I have a small arsenal of 15-watt tube amps, so the idea is that we'll all just play into low-wattage tube amps at low volume and see what we come up with.
One of the most important Telecaster players was Clarence White, who, during his short career, contributed more to country electric guitar than almost anyone else, along with being a phenomenal bluegrass flatpicking guitarist and a pioneer of thecountry rock genre. He played with the Byrds, and Nashville West along with the bluegrass bands the Kentucky Colonels andMuleskinner. He enlisted the help of Gene Parsons and invented the StringBender, a device inside the body of the guitar that raises a string’s (either the B- or G-string most of the time) pitch when pressure is applied to the strap. His Telecaster is one of the most recognizable and is now owned by Marty Stuart.
Echo and delay are created by copying the original signal in some way, then replaying it a short time later. There's no exact natural counterpart, though the strong reflections sometimes heard in valleys or tunnels appear as reasonably distinct echoes. Early echo units were based on tape loops, before analogue charge-coupled devices eliminated the need for moving parts. Today, most delay units are digital, but they often include controls to help them emulate the characteristics of the early tape units, including distortion and low-pass filtering in the delay path and pitch modulation to emulate the wow and flutter of a well-used tape transport.

Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.

The AS is a semi-acoustic guitar built to tackle just about any genre of music you throw at it. The pickups are mounted into a sustain block for increased sustain and feedback elimination. The 17th fret joint features comfortable access to higher notes. Super 58 Custom Pickups The Super 58 Custom pickups deliver the smooth, nuanced tones and the biting growl of blues. Ebony Fret board w/ Art star Fret Edge Treatment The Ebony fret board with Art star fret edge treatment provides tight response and smooth left-hand fingering. Bone Nut The Bone nut provides richer tone from low to high. Specifications: neck type: Art star 3pc Mahogany/Maple set-in neck body: Flamed Maple top/back/sides fret board: Bound Ebony fret board w/Pearl & Abalone block inlay frets: Medium frets w/Art star fret edge treatment bridge: ART-1 bridge tailpiece: Quick Change III tailpiece neck pu: Super 58 custom (H) neck pu bridge pu: Super 58 custom (H) bridge pu Neck Dimensions: Scale: 628mm/24.7" a: Width at Nut - 43mm b: Width at Last Fret - 57mm c: Thickness at 1st - 20mm d: Thickness at 12th - 22mm Radius 305mmR Body Dimensions: a: Length - 19 1/4" b: Width - 15 3/4" c: Depth - 2 5/8".

So fun...So dope...I am sure the game is really great, and I know that it has gotten a lot of acknowledgement, but the reason I give it only 4 Stars for me personally is because I test every single new game out that I purchase with my 60 Year old Parents to see if they are interested in it because if they are then we usually play the game together and watch the stories unfold....This game this game OMG this game I have been waiting for since PlayStation 3 I'm so glad I was able to play this let me tell you get this game if you have PlayStation or if you want to play it exclusive for PlayStation or if you want to just see the whole franchise get a PlayStation and play and I highly recommend getting a PlayStation 4 Pro you will not be disappointed with this game.
With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.
This is the main component that separates acoustic guitars from electric guitars. A pickup senses the vibration from a string, transfers it to the guitar amplifier which then transfers it to the loudspeaker. There are many pickups but we’ll cover the four basic ones. The single coil pickup has a single coil of wire with two horseshoe-shaped magnets. They produce a bright, cutting sound and are quite noisy. The P90 pickup is a single coil pickup with one wide coil that increases the surface area of the strings, producing a bigger yet less bright sound. Humbucker pickups were designed with twin coils. They produce richer, warmer, more powerful sounds but roll back some higher frequency sound. Active-passive pickups use a battery-powered circuit to produce a powerful yet balanced tone across a range of frequencies. It outputs a balanced, clean tone.
The Hoshino Gakki company began in 1908 as the musical instrument sales division of the Hoshino Shoten, a bookstore company. The Ibanez brand name dates back to 1929 when Hoshino Gakki began importing Salvador Ibáñez é Hijos guitars from Spain.[1] In 1933 The Salvador Ibáñez é Hijos cy. was bought by Telesforo Julve and incorporated in his enterprise. Hoshino Gakki started making Spanish acoustic guitars from 1935, at first using the "Ibanez Salvador" name, and then later using the "Ibanez" brand name [2].
"The Legacy’s vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ‘50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo’s private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ‘50s, all on a quest to discover where the real mojo was – and wasn’t. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming that down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon’s persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World."
Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0-8223-1265-4. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”
The plectrum, or flat pick, is another key piece of essential equipment. For electric guitars, it tends to be a thin piece of plastic, metal, shell or other material shaped like a teardrop or a triangle. There are also thumb picks mounted on rings and finger picks on the player's fingertips; you'll see electric guitarists using both of these as well as a standard pick. 
A Delay or Echo pedal creates a copy of an incoming sound and slightly time-delays it, creating either a "slap" (single repetition) or an echo (multiple repetitions) effect. Delay pedals may use either analog or digital technology. Analog delays often are less flexible and not as "perfect" sounding as digital delays, but some guitarists argue that analog effects produce "warmer" tones. Early delay devices actually used magnetic tape to produce the time delay effect. U2's guitarist, The Edge, is known for his extensive use of delay effects. Some common Delay pedals are:
Delay/echo effects can sound pretty good when plugged directly into an amp’s input (See Example 3, above)—hell, the Edge built a whole career out of doing just that—but if you want absolutely clean, pristine delay and echo effects with no distortion, the effects loop is the only way to go. Reverb effects should always be patched into the effects loop (See Example 4, below) unless you always play through the cleanest of clean sounding amps. Overdriven or distorted reverb just ain’t very pretty, and it can destroy any semblance of clarity or definition and smear your sound like the ketchup on a baby’s face when it’s trying to master the fine art of eating a messy pile of French fries.
I think that a good EQ in the loop is awesome. If you find an amp that has a great overall sound, but you wish that it was a bit brighter, darker, etc, but you find that you loose the character of the distortion when you get the tone you like you can play with both EQs to have a lot of controll over the final sound. It won't make up for a crap amp, but it can make a great amp a whole world of awesome.

{"pageName":"[gc] pdp: musicians gear electric acoustic and bass guitar stand","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: accessories: stands and racks","prop1":"[gc] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","prop6":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","prop3":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers","prop4":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","products":";451058;;;;evar65=New-Accessories-Musician's Gear","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}

In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him. (info from Wikipedia, photo of Jimi Hnedrix from
• Stop: A stop tailpiece is a bar, typically made of an alloy, which is held to the body of a guitar by large screws threaded into embedded sleeves. They are most often aluminum, zinc or brass based, with the latter the most costly. Aluminum has a few advantages. When the stop tailpiece was perfected by Gibson over a half-century ago, the originals were made of aluminum. Many players prefer those today for the vintage vibe, but aluminum is also the lightest weight tailpiece alloy, which some believe allows the strings and the guitar’s body to connect — which is another function of the tailpiece — in a more resonant fashion. It’s best to be careful while changing strings with a stop tailpiece, because they sometimes fall out of their sleeves and can scratch the finish.
New too was “the popular Supro” Baton Guitar, sold with a matching Baton amp as the Supro Baton Guitar Outfit No. 200. This was basically the same shape as the old Avalon, but a short-scale (21″) student version now finished in a grained walnut finish. The silkscreened fingerboard sported diamond inlays. The Supro logo plate was on the slightly flared head. This had the new exposed-staggered-pole pickup with a rectangular handrest bolted on over the pickup, all mounted in the middle of a large square plate. The strings attached to a pyramidal tailpiece. Controls now included bakelite volume and tone knobs on either side of the end of the fingerboard. The back was covered in no-slip suede. It came with a natty alligator soft case. Based on the use of the description “popular,” which Supro almost always used to describe previously available models, the transition from the Avalon to the Baton may indeed have begun in 1940.
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!

This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.

This is a Japanese Fender Jaguar electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This amp gives a really nice full clean sound. I have recorded it on the edge of break up so the low velocity samples come out clean and the high velocity samples come out with a bit of nataural power valve distortion. You can add more distortion with effects if you need it dirtier. It is hard to get this natural break up sound with effects which is why I have recorded it that way and if you add distortion it still has the natural bite of a valve amp (except with more distortion). This makes it very expressive just by the difference in tones at different played velocities. The lowest velocity is muted samples. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them. The sound is suited to a lot of types of music. These guitars have been used for all sorts of music over the years. It has not much sustain and makes a bright clean sound.
This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977.
A combination of standard 7-string tuning and an 8th string dropped one full step. Allows to play in the range of a standard electric bass, as well as power chords. Used by Animals as Leaders[47] and Whitechapel (on the songs "Devolver" and "Breeding Violence" from A New Era of Corruption). Also used by Deftones on Koi No Yokan and Gore, Allegaeon, and Emmure on the song "N.I.A. (News in Arizona)". A variation of this tuining is used by Hacktivist with 3rd and 4th strings tuned a whole step up to A and E respectively.
Sennheiser's cardioid MD421 crops up almost as frequently in interviews, and has a wider frequency response, none of the low mid-range suckout, and an even heftier sensitivity boost upwards of 1kHz. This microphone also has a larger diaphragm than the SM57, and the off-axis response anomalies of the larger diaphragm, in particular, give a different character to the sound. Although obviously very popular, this mic seems more often to be used in combination with other mics than on its own.
While many electric guitar amp cabs have "open back" designs (actually partially open back, as part of the back is usually enclosed in panels), open back cabinets are rarely seen in bass amp cabs, except in the smallest, least expensive practice bass amps. The reason that open back designs are not used with bass amp cabs is that open back designs make it hard to reproduce low-frequency sounds, which are crucial for bass cabinets. On electric guitar amp cabs, the reduction of some very low-frequency sounds may be desirable, as it makes the cabinet less "boomy"; however, for a bass cabinet, this loss of bass frequencies is generally seen as undesirable.
Learning how to play guitar on an acoustic style guitar brings about the benefit of forcing you to learn better habits at the beginning rather than unlearning them later, which is exponentially harder to do, because they're a bit more unforgiving about hiding your errors, especially because you won't be hiding behind a string of distortion and reverb pedals.
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.