Guitar chords are usually represented by the name of the root note, and the scale it is based on, such as A Major, written as simply A. An A chord built on a minor scale is called A Minor, and written as Am. An A chord built with a 7th is called A7, and so on... Diagrams are used to show how the chord is actually to be played on the guitar, with finger positions mapped out. For a complete overview about chord structure, check this guitar chords formula chart.

• Don’t always blame the frets: Buzzing doesn’t necessarily mean there’s a fret problem. Some guitar players set their bridges for super-low action in their quest for speed, and that can makes frets buzz. For beginners unfamiliar with how accurately tuned strings sound or more experienced players exploring dropped and open tunings for the first time, buzzing can also be a buzz kill. Low tunings like dropped D and open D and open C may prompt guitars with normal action to buzz due to the slack in the strings unless a guitar is set up properly to accommodate such tunings.
Flanging can be a subtle effect, thickening the sound and imparting a spacey feeling. Or it can be extremely dramatic when cranked up, to the point of making the original signal unrecognizable. This broad range makes a flanger a fun stomp box to experiment with. Jimmy Page used a flanger to good effect on Led Zeppelin’s “Nobody’s Fault But Mine” and “Kashmir, ” as did Jimi Hendrix on “Bold as Love.”
Guitars. Having all your guitars set up properly is an obvious essential for dialing in good tone. I like low-ish action, and for low action to work, I need to set my guitar necks to have just a bit of relief so the strings won’t buzz and rattle, and in turn choke the tone. I’m always checking the neck relief on my guitars and adjusting the truss rod accordingly.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.

Ibanez brand guitars are manufactured at a variety of factories in several countries under contract from the brand's owner, Hoshino Gakki Group. The catalogs scanned and linked below represent output from the year 1971 through the present. During the 1970's and most of the 1980's, Ibanez guitars were made almost exclusively in Japan, and the majority of electric models were made at the Fujigen Gakki manufacturing plant.
"NEW-DEMO" means that we are an authorized dealer of the item and acquired it directly from the manufacturer. We consider the item to be new because it has not been sold to or owned by another customer. NEW-DEMO items, however, have been on display in an active retail music store for some length of time. As a result, these items may have been tried out by other customers. They may be dusty, have fingerprints, stick marks, pick swirl, etc. Please refer to the item's description for more detailed information. All NEW-DEMO items come with a manufacturer's warranty (where applicable), but some may not have original manufacturer's packaging. Please refer to our Appearance and Technical Condition scales below for more information about the item’s appearance and condition. 
A compressor “compresses” the signal that your guitar produces by normalizing the dynamic range of the audio input signal based on a threshold value. This effect is used virtually everywhere in recording. Everything you hear in music that is produced today is compressed in some way–and it can sound anything from a subtle barely noticeable effect to a thick, dampened squish.
Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.
After lowering the bridge (usually in a failed attempt at getting lower string action), the owner will eventually realize this is not the best solution. When this happens and a neck reset is preformed, the original bridge will now be *useless* (because it is too low!) The repair guy won't reset the neck to a low bridge, so a new replacement bridge will be installed. At this point the originality of the instrument is compromised.

In the Beatles' early days, George Harrison briefly billed himself as Carl Harrison in honor of his quick-picking hero. Perkins' bright, trebly style – which the rockabilly king picked up from blues players in Tennessee – defined the singles he put out on Sun Records ("Blue Suede Shoes," "Glad All Over") and influenced scores of players from Eric Clapton to John Fogerty. "He took country picking into the rock world," Tom Petty has said. "If you want to play Fifties rock & roll, you can either play like Chuck Berry, or you can play like Carl Perkins."
Music is an art, which can create pleasure in our mind. We can do it with the help of a good musical instruments like guitar, flute, harmonium etc. This art has the power to change our mood. Here we are introducing top ten best guitar brands with price in India. These brands are providing high quality guitar. Most of the musicians choose these brands. All are ensuring high performance. Some of the companies provide quality guitar at affordable prices. Our list covers ten well known company. They offer wide range of guitars. If you are looking for a good guitar brand, check out our list.

Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.
Thats a major bend of opinions! It all boils down to..the style of music that you play and what you expect out of the guitar! Is playing only a hobby or are you trying to make a living bangin that Ax? The price of a guitar is not as important as the ability of the person strumming the strings! If your abilitys suck,and you have a expensive guitar..You Still Suck..No matter how good the guitar may be! I have owned cheep and expensive guitars of all different brand names..some very good..some very bad..bottom line is..if Your happy with the AX,thats all that matters! Screw the Name or the Price!!

The Effect: Loop pedals essentially operate as recorders that have the ability to infinitely spin the recorded bits and possibly alternate them in a variety of ways. The main function of any looper is to be able to record a musical part, and then automatically put it on loop until ordered not to do so anymore. Depending on the complexity of the pedal, loopers can offer multiple layers, overdubs, as well as options of recording more than a single instrument. They range from simple single-switch stompboxes all the way to powerhouse loop workstations. Check out our full reviews to see which one is your perfect match. If you are looking for the quick winner, the Boss RC 3 is a great contender.

As you will note in the earliest catalogs, Ibanez guitars were first "copies" or "reproductions" of guitar models originated by several American guitar manufacturers and manufacturers from other countries. They were not forgeries, as they were never sold with misleading logos or with the intent to deceive. Ibanez models replicated such styles as the Gibson Les Paul, Fender Stratocaster and Telecaster, Rickkenbacker styles, and others. Due to their high quality, Ibanez guitars and those made under other brands, such as Greco and Aria, quickly earned a reputation around the world as quality instruments at a great value. There is a form of urban legend that circulates in the guitar community that has many variations, but usually involves either Gibson or Fender suing Ibanez, Aria, or some other Japanese manufacturer, with the intent to stop that company from manufacturing superior copies. The truth is less glamourous. Only one company ever sued another, and it was Norlin (the owner of the Gibson brand at the time) suing Hoshino (owner of the Ibanez brand) and the suit was focused only on the "open book" headstock shape common to Gibson guitars and replicated on the Ibanez guitars. The suit was brought in 1977, but by then Ibanez had already changed the headstock shape on its copy models, so the suit was settled out of court. No other company was ever sued by any other company. However, this episode has given rise to the term "lawsuit" guitar, which is used to describe any Japanese copy guitar made in the shape of an American manufacturer's model.
It was late 1969 early 1970. I was 13 years old and had been learning guitar for about a year when I was given what I considered to be the key to a world of freedom. Mum & Dad said it was ok for me to setup my room in a shed inside Dad’s garage. The shed was the size of a small bedroom, about eight by ten in the old measurements. It was originally built from scraps of recycled building material from a 100 year old house and was initially used as a tool shed.

Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.

Thanks for posting the cool video. I have a Decca like that one. Its pickups migrated to my #1 guitar, which is a relative from roughly the same era (early 1970’s), a Daimaru (sunburst, jazzmaster / jaguar copy surf guitar body, tremolo, etc.). The Decca now has one Daimaru pickup (I wrecked the other one when I was a teenager — thinking I was going to ‘improve’ it), but otherwise, my Decca looks basically identical to yours — except for it has the original tuners, and I angled the bridge in the 1990’s. The neat sound you can get from one of these particular Deccas is the placement of the bridge pickup, it’s a bit further from the bridge than a lot of other electrics, which gives it a neat, plunky sound to it — as is apparent from your video.
In the event it does not work out, the next measure is to utilize automotive fine grade sand paper to decontaminate contact points. Once more, cover this around a Q-tip for jack inputs and replicate the contact cleaner procedure. By now, you should have confirmed any likelihood that the problem is caused by a cleanliness issue. All your equipment should be fresh and clean for your upcoming performance.

I have a hunch its a cheapo guitar and probably not worth a neck reset. Can't tell if it has a bolt on neck. my other guitars all have more warped soundboards though. The saddle is sort of cradled in wood by the bridge, the angle could be better, but I'm surprised there is any angle considering the saddle only pops out like a millimeter. The bridge curves down towards the pins to provide the angle. It probably has been set up in the past by someone who wanted an acoustic guitar to play like an electric, then it got reversed it later by way of the truss rod.
When Bob Dylan described the Band's "wild mercury sound," he was really talking about Robbie Robertson's guitar, as exemplified by his torrid, squawking solo on "Just Like Tom Thumb's Blues" from their 1966 tour. But by the time the Band were making their own LPs, Robertson had pared down his approach, evolving into a consummate ensemble player. "I wanted to go in the opposite direction," said Robertson, "to do things that were so tasteful and discreet and subtle, like Curtis Mayfield and Steve Cropper… where it was all about the song."
Standard versions and collectable versions of the 4003 have included the 4003s (special)(discontinued 1995) a 4003 similar to the 4001s with dot neck markers, no body binding based loosely upon the original Rickenbacker basses and fitted with 4001 pick ups. 1985-2002 versions of 4003 and 4003s were available with black hardware option and black binding. Other later special editions have included 4003 Blue Boy, 4003 CS (Chris Squire) similar to 4001 CS Limited edition specials include the Blackstar, the Shadow Bass, the Tuxedo and 4003 Redneck.
Small guitar amps, contrary to popular belief, have the ability to produce a very powerful sound. You don’t need a whole lot of surface area to have an impressive sound, as so many chihuahuas have proven by keeping up their owners nights on end with their barking. The small amplifiers, the best of them, have sound comparable to the sounds of the larger amplifiers. This has been proven many a time, especially by the band called Annihilator. The guitar player for the band has a very specific set up for himself, with a relatively small amp being one of the main parts of the set up. While his is not as small as some of the ones here, it just goes to show that a live performance does not need a large amp for good quality sound.

While we are on the subject of cute little things, I want you to consider the idea of a small amplifier with a cute name but with the looks of Marlon Brando in his early years. Wait, no, that is incredibly freaky and not something anyone wants to imagine. I mean how would you even connect your guitar to that? What I mean is imagine an incredibly handsome amplifier. Well, now that you have, let me ruin your dreams by directing your attention at the pignose 7-10 legendary portable amplifier, which is an actually rather handsome piece of equipment. The great thing about this beautiful box is that it also has a great sound, comparable to that of its betters (read: of the more expensive models). Being very light and fun to possess, it is highly portable and loud enough to captivate audiences. A great, affordable small amplifier that does not look Marlon Brando in any way, and thank god for that.

The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at .

You will see numerous inputs and outputs for sound, depending on your computer. You will want to enable the main one (in which all of the sub­devices are listed) and two others: one for input, and one for output. For input, look for something similar to “Line in”. If you only have a microphone jack, enable that instead. For output, look for “Stereo out” or something similar.

When speaking of electric guitars and pickups we are usually talking about magnetic pickups, as they use magnets to convert the vibration of the string into an electric signal, and these can be divided into 2 main types: The Humbucker (Double-coil) and the single coil pickup. Double-coil pickups are basically single coil pickups mounted side by side and the sound they pick up is "integrated" through to the output.
Mahogany is a very dense, strong wood used in all parts of guitar manufacture except fretboards and bridges, which require harder wood. A mahogany neck and back are often found on short-scale guitars with maple tops. Another common combination is an all-mahogany body and neck (excluding the fretboard). Because mahogany is not very hard, it emphasizes the midrange and bass frequencies for a mellower guitar tone. Mahogany is a very resonant wood which enhances a guitar's sustain. It is generally a uniform rich brown color.
If you want to splurge just a bit more and opt for an instrument with a little more stylistic range, the Ibanez Talman guitar vault accessory kit might be right up your alley. It includes a lovely seafoam green Ibanez TM302SFG, 12 high-quality Dunlop Tortex picks, a strap, a gig bag, a Kyser capo, a polishing cloth, and a tuner. This is off the beaten path a bit, but for some players, that’s going to be absolutely perfect.

Inspiring, light, and upbeat corporate background music with motivational and optimistic energy. Positive and sunny tune for technology and business presentations, travel inspirational Youtube videos, success stories, unforgettable journey, slideshow, TV, radio. Featuring muted electric guitar, piano, synth pads, acoustic guitar, drums, bass guitar, piano.
When you’re just starting out you generally play in less than ideal conditions and your soundman, if one is present at all, isn’t going to be as well versed in his/her craft as someone who works in larger venues. Because the guitar is resistant to feedback and gives you the option to sculpt your tone without having to rely on a console, it will prove to be a valuable asset.

The model designations of the archtops are unknown. Later these guitars would have either a PE or EP model designation, so presumably the ones in the photo did, too. One appears to be a full-sized, thick-bodied archtop with a rounded cutaway. Not much is visible in the photo, but it apparently had a single, white-covered pickup at the neck, block inlays and a white pickguard. The other guitar had a single pointed Florentine cutaway and was slightly smaller than, say, a Gibson ES-335. It’s impossible to tell the depth from the photo, but it looks as though it’s a thinline. This, too, had a single white pickup at the neck, moveable adjustable bridge, trapeze tail, large white pickguard (not modelled on a typical Gibson shape, by the way), a little plastic plate on the lower bout with volume and tone, with white knobs. The fingerboard has large white dots, with double small dots at the octave. The f-holes are three-part; the headstock Teisco three-and-three.
While the company officially started by importing Spanish guitars, the Ibanez that we know really started in the late '60s when they began copying popular American guitar designs. As expected they got flak for their unofficial "lawsuit" copies, but this ultimately inspired the company to improve on existing designs and develop their own. Soon, virtuosos and big name guitarists like Steve Vai, Joe Satriani and more took notice, propelling the Ibanez brand into world wide renown. Now Ibanez is as big as it gets, with a wide variety of instruments, pedals, and amplifiers under their name. They make it to this list with the high ratings that their amps are receiving, headed by their Tube Screamer Amplifier series, which comes with the circuit of their popular boost/overdrive pedal built into the amplifier section.
Straight out of the box, you have 6 x enhanced amp voices to choose from ranging from crystal cleans to bone crushing gains to get to grips with as well as 12 x super wide stereo FX effects that you can use to create your ideal sound. The 10 watts pumping out of the 2 x 3” woofers make it a great desktop amp and something to jam along with friends. The amp is ideal for beginners still getting to grips with their sound as you can choose from Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1 and OD and the budget friendly price tag makes it all the more appealing. This software is a free download that functions as an editor/librarian for your Spider tones. In addition, you also get Presonus Studio One DAW bundled with the amp so you can record loops, craft entire songs, change and store patches using the Blackstar INSIDER software. This is not only one of the best cheap amplifiers, it’s also one of the best amps for beginner guitarists who want to get into signwriting too!
These guitars have the smoothest necks. Their oiled and waxed naked necks are the most comfortable necks I have ever played on. They offer a lot of great options, but they especially accommodate those of us with smaller hands. Every Music Man is fully loaded with ergonomic and functional features. No fatigue, they stay in tune well and set up easily.
Struggling to get your guitar sounding sweet and creamy? Don't fret! STUDIO GUITARS is here to warm up your sound with a selection of certified studio-fresh guitar loops recorded by Prime Loops' own professional master of the strings! Using some of the most classic equipment around, we've covered every curve of this awesome instrument's sound with an incredible collection of acoustic and electric guitar samples.
Launch price: $499 / £445 | Body: Chambered basswood body with arched-maple top | Neck: Maple | Scale: 24.6" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Black Top humbuckers | Controls: Neck volume, bridge volume, tone, master volume, 3-way pickup selector | Hardware: Anchored Adjusto-Matic bridge | Left-handed: No | Finish: Gold, Silver Sparkle, Black
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
While I’m on the subject of guitar myths... Many sellers of vintage Japanese guitars have been throwing around the term “lawsuit guitar”, although not usually in reference to Kents. In 1977 the Norlin Company, which owned Gibson at the time, sued Elger Guitars, which was the U.S. distributing arm of Hoshino Gakki of Japan. The suit claimed that Hoshino-made Ibanez guitars too-closely copied the headstock design of Gibson. Just the headstock. By the time the suit was brought out, Hoshino had already changed to a headstock more closely resembling what was on Guild guitars of the time. So it was pretty easy for Elger Guitars/Hoshino to promise not to copy the Gibson headstock anymore.

I know of two amp-and-effects modeling apps for the iPhone/iPod Touch/iPad, both of which are great and allow you to get realistic amp tones through your headphones. AmpKit and Amplitube both do a great job of simulating all the standard amp models and pedals, and they aren't very expensive. I use and prefer AmpKit myself, and between the app and the guitar-to-iPhone interface, I spent a total of $50.

The previously discussed I-IV-V chord progressions of major triads is a subsequence of the circle progression, which ascends by perfect fourths and descends by perfect fifths: Perfect fifths and perfect fourths are inverse intervals, because one reaches the same pitch class by either ascending by a perfect fourth (five semitones) or descending by a perfect fifth (seven semitones). For example, the jazz standard Autumn Leaves contains the iv7-VII7-VIM7-iiø7-i circle-of-fifths chord-progression;[80] its sevenths occur in the tertian harmonization in sevenths of the minor scale.[81] Other subsequences of the fifths-circle chord-progression are used in music. In particular, the ii-V-I progression is the most important chord progression in jazz music.
1976 Fender Stratocaster, Some changed parts to include,pickguard, tuners,possibly knobs. Original factory natural finish, fret wear, plays but will need a refret at some point,Comes with a non original black tolex hard shell case. No backplate or tremolo arm. Overseas clients PM me for accurate shipping quotes as free shipping is only to a lower 48 US address. Trades may be considered.      SEE MORE HERE .
This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!

I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.

This is the classic effect that many people first buy and overuse. Chorus works by inaudibly delaying each note to thicken and sweeten your original sound. If set too high it can make your sound overly ‘sugary’ so use it sparingly with electric or acoustic and it will provide some sparkle over a song section. With chorus’s you get what you pay for so the overall sound quality of a £25 unit might become irritating in the long run.

Due to the ever rising popularity of reverb, it didn’t take long for companies to figure out how to recreate the effect in early guitar amps. Have you ever heard of Spring Reverb or Plate Reverb? While to you these are just labels on a knob, back then these were real analog devices built into amplifiers. Needless to say, we have come a long way from using complex mechanical contraptions to create decent reverb.
With the ME-80, Boss has made a unit that’s slightly different than a traditional multi-fx unit. Instead of trying to simplify the interface and make it sparse and clean, it’s immediately evident that there are a LOT of knobs on the front of this unit. The ME-80 is trying to mimic the feel of having a pedalboard full of pedals at your fingertips. This is good, because us guitar players love pedals for exactly that reason - you can just look down at them, twist some knobs, and your tone changes. Instant gratification! Not many guitarists we know like to scroll through endless menus and read text on a tiny screen, much less have to read the user manual cover to cover to understand how to work our gear. We want to twist a knob or two, and we want to play!
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
The moral of this story is simple, if you have an old Terada, Yamaha, Ibanez, Suzuki, Yairi, Tokai, Takamine, Emperador, Morris, Pearl or Tama (yes! they made guitars to) just to name a few, you probably have a guitar that given the right bit of TLC will wipe the floor with most of its modern competitors, including those beautiful guitars that cost $2000.00 plus. Ok Then, enough of my yacking, enjoy the pictures.

A good guitar builder can pick materials that provide a predictable result. The process of making a guitar that costs $10,000 and one that costs $1,000 is identical, or at least very similar. The big difference is likely that in the more expensive one, personal attention has been put into selecting, drying, storing, and cutting the tonewood. The cheaper, which is mass produced by less skilled labor, consists of the same species of wood, but from a pile that came out of a container, in the order it was stacked. This means that two guitars from the same batch can sound quite different. They can sound exactly like the expensive guitar, but they can also sound different.
The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333
The reality is, each of these approaches to adding effects to your tone has advantages and disadvantages. Are you a no-effects type of player, or a pedalboard kind of player? Maybe you like some pedals for your dirt, but would like your delay and reverb in the effects loop of your amp. Or maybe you would like to go the full on w/d/w route, for the ultimate in power and programmability! Let’s take a closer look at the options that are out there.

Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.

This preamp can also offer a gain control. Essentially, it’s what drives the power levels of the signals to the amp, but it can also boost volume. If the preamp doesn’t have a gain control, it can be assumed that it’s already factory-set to a certain level of gain. One way around the lack of a gain control is to use the volume control on the main amp. Either way, it’s very helpful when you find you need to compete in a multi-instrument band when you feel like you’re being drowned out or you’re experiencing unwanted feedback when you do try to vie for being heard.
{ "thumbImageID": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Green-Blue-Burst/J17594000005000", "defaultDisplayName": "Rogue RA-090 Concert Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51500000029405", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "300.00", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Blue-Burst-1500000029405.gc", "skuImageId": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Blue-Burst/J17594000003000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Green Blue Burst", "sku": "sku:site51500000029407", "price": "89.99", "regularPrice": "149.99", "msrpPrice": "300.00", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Green-Blue-Burst-1500000029407.gc", "skuImageId": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Green-Blue-Burst/J17594000005000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red", "sku": "sku:site51500000029406", "price": "89.99", "regularPrice": "149.99", "msrpPrice": "300.00", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Red-1500000029406.gc", "skuImageId": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Red/J17594000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51416325129147", "price": "89.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Black-1416325129147.gc", "skuImageId": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Black/J17594000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51416325129042", "price": "89.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Natural-1416325129042.gc", "skuImageId": "RA-090-Concert-Cutaway-Acoustic-Electric-Guitar-Natural/J17594000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Martin also periodically offers special models. Many of these have a limited production run, or begin as a limited-production guitar that sells well enough to become regularly produced. Many of these special models are designed with, endorsed by, and named after well-known guitarists such as Eric Clapton,Clarence White, Merle Haggard, Stephen Stills, Paul Simon, Arlo Guthrie andJohnny Cash. In 1997, Martin launched its “Women in Music” series, which was followed in 1998 by the Joan Baez Signature guitar, a replica of the 0-45 Baez began her career with.

After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.
{ "thumbImageID": "Edge-09-Bass-and-Amp-Pack-Red/512175000005000", "defaultDisplayName": "Dean Edge 09 Bass and Amp Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red", "sku": "sku:site51273887987661", "price": "299.00", "regularPrice": "299.00", "msrpPrice": "429.00", "priceVisibility": "1", "skuUrl": "/Dean/Edge-09-Bass-and-Amp-Pack-Red-1273887987661.gc", "skuImageId": "Edge-09-Bass-and-Amp-Pack-Red/512175000005000", "brandName": "Dean", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51273887987411", "price": "299.00", "regularPrice": "299.00", "msrpPrice": "429.00", "priceVisibility": "1", "skuUrl": "/Dean/Edge-09-Bass-and-Amp-Pack-Black-1273887987411.gc", "skuImageId": "Edge-09-Bass-and-Amp-Pack-Black/512175000001000", "brandName": "Dean", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

You can think of these pedals like modulation effects that change nothing but the timing. They split up the signal in the same way, but time-based effects don’t usually make any major changes to the copied signal. Instead, they hold it back by a certain length of time before mixing it back in. This makes a few different varieties of pedal possible:
A bit underrated and under the radar, Blackstar makes some superb amplifiers at a fraction of the cost you’ll find from bigger name brands. And while it’s a shame they don’t get more recognition, it’s good news for you, the user. This particular amp might just be the best option for apartment living – due to its small stature and low-level volume paired with the fact that it is still a tube amp. But don’t let the fact that it’s only 1-watt fool you – thanks to the simple truth that it uses tube amplification, it can still get plenty loud. Of course, if you’re overly concerned about noise, this option also comes with a headphone jack, and it’s one of the few tube amps to even offer that convenience.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
There’s always a temptation not to spend too much money on your first guitar in case you change your mind and stop playing. However, budget guitars can be more difficult to play and you’ll begin to think it’s all too hard, when a better instrument will be easier and encouraging. Cheap guitars can have a high “action” (the distance between the string and the fret board) which makes pressing the string down tough work for novice players. The frets can be poorly set, meaning the strings rattle and buzz. The timber used is just standard factory sheeting. It all adds up to a cheap guitar. At the same time, I have to admit that in the crazy lottery of mass production and manufacturing, sometimes you’ll find a good guitar has been built. Go figure…
This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable.
There are continuous debates on various topics that I am often asked to contribute to with my opinion. I usually decline, because it’s rarely important what my opinion is when it comes to the instruments I produce – it has to be the musician’s opinion that counts. So let’s start by the question “Which tonewood is the best” and just answer it with “The tonewood that gives the musician the sound and feeling he or she is after” and then we can leave it at that.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.
 You will not grow here or learn anything that will be useful in any other company unless they employ 1950's management techniques. Maybe a screenwriter for "Madmen" would find some material here but as someone trying to grow their career you won't learn anything useful. The pay will be no better than your last job minus your previous bonus and 401k match which to my knowledge they do not contribute. So next question, your not making any more money and probably less, not learning anything useful and will need to explain why you left after 6 months, how are you going to position this to beat the competition going after your next job?
Following the lead of Electro, which was having some success with their cast aluminum alloy bodies, Dobro – still a separate company – introduced its first cast aluminum Dobro Hawaiian electric lap steel guitar, probably in late 1934. Along with the aluminum lap, Dobro also debuted the Standard Guitar, and the Mandolin. Accompanying these was the Dobro Amplifier. All four listed for $67.50. These are all shown in the ’35 Tonk Brothers catalog.
{ "name": "Walnut", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut-1500000014893.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014893", "shipToStore": true, "displaySku": "J40301000005000", "displayId": "1500000014893   POS #: 112318365", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000005000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Walnut", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
Few non-American guitar brands have meant so much to so many American guitar buffs as Teisco guitars. Indeed, through their mid-’60s connection with the Sears and Roebuck company, many a modern guitar player learned his or her first chops on a Silvertone made in Japan by the Teisco company. Nevertheless, for years Teiscos were the object of ridicule, the penultimate examples of “cheap Japanese guitars” (a reputation more based on cultural chauvinism than objective analysis, truth to tell). Even Dan Forte, who essentially began the category of writing about off-brand guitars (and who has given me many an entertaining moment in my life), chose Teisco Del Rey as his nom de plume, with more than a little tongue-in-cheek humor in the selection, no doubt.
hi-its the standard wiring for a strat-i have the push pull in the middle position-i have two wires going from two lugs on the push pull pot- one   giong to neck position on 5 way selector swich and the other to voloume on selector switch-when i have select     brige position when  i pull  middle pot i get neck and bridge -next position all three – middle position neck /middle .next neck middle and first position -neck=also if you put two tone  caps on one pot will it effect the pickup sound when it maxed to ten  and willit sound too bassy–thanks sean
When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
Multi-effects units are exactly what the name implies—single units that offer many different effects and allow those effects to be used singly or in combinations simultaneously. Most will offer just about all the effect types discussed in this guide and many more. Typically they include dozens if not hundreds of effects presets—combinations of effects and effect parameters designed to achieve specific sounds with the touch of button or footswitch. Most also allow you to also save your presets for instant recall.
The first guitar developed was the K1 Series. Launched in 2000, this instrument had a dreadnought cutaway design and used inexpensive materials such as laminated spruce for tops, and sapele for back and sides. Kona Guitars then launched the K2 series after which it diversified, at present offering over 30 models of guitars, ukuleles, violins, and other instruments.
However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.
I was a little concerned buying a guitar on Amazon. I had not even played a sample on the Gretsch acoustic. I've played Martins, Fenders, Washburns, etc. but never heard of the 'Gretsch'! It arrived within a few days of ordering with the case I ordered too. I had it delivered to my office so that it wouldn't be sitting on my porch until I got home. I opened the box to examine the guitar and co-workers asked me to play something. As I was tuning the white Gretsch I broke a string, so playing it for my friends was not going to happen. When I got home I re-stung the guitar and as I was tuning it I was not very impressed. I like the look but come on we purchase a guitar to play! After it was tuned I began to play a few chords and licks.
The Effect: Loop pedals essentially operate as recorders that have the ability to infinitely spin the recorded bits and possibly alternate them in a variety of ways. The main function of any looper is to be able to record a musical part, and then automatically put it on loop until ordered not to do so anymore. Depending on the complexity of the pedal, loopers can offer multiple layers, overdubs, as well as options of recording more than a single instrument. They range from simple single-switch stompboxes all the way to powerhouse loop workstations. Check out our full reviews to see which one is your perfect match. If you are looking for the quick winner, the Boss RC 3 is a great contender.
If this doesn’t work, or you’re just a little paranoid about hooking the guitar directly into the PC, you can get one of these. This is the Line 6 Pod Studio GX, and it’s a great value and pretty much a one-stop shopping starter kit. The box you see there is a guitar USB interface, with an input designed for guitar. It’s also got a headphone output, so you can listen through the interface. I had an older version of this ages ago, which I used for basic guitar input until I got some more advanced recording gear that worked well with guitars.

It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.

This tuning may also be used with a capo at the third fret to match the common lute pitch: G-c-f-a-d'-g'. This tuning also matches standard vihuela tuning and is often employed in classical guitar transcriptions of music written for those instruments, such as, for instance, "La Canción Del Emperador" and "Diferencias Sobre Guardame Las Vacas" by Renaissance composer Luis de Narváez.
Breedlove is a semi-recently founded guitar manufacturer that has a main focus of acoustic guitars. Breedlove doesn’t have a massive following like some other brands, so it can be difficult trying to find one to test before purchasing. Breedlove tends to evolve their guitars and tries to push the world of acoustic guitars forward. Their Oregon Concerto Myrtlewood acoustic, for example, manages to produce a big, refined sound and the notes are more resonant. This is due to their tapered myrtlewood body and smaller sound-hole. The body shape is also very important as it’s part of the reason they sound so good and it’s even comfortable to play. All of their guitars are very high-quality and work well for all fingering styles and genres of music. If you want a really great acoustic, you really can’t go wrong with Breedlove.
From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!
{ "thumbImageID": "4003S-Electric-Bass-Guitar-Midnight-Blue/J20317000004000", "defaultDisplayName": "Rickenbacker 4003S Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51423495785840", "price": "1,949.00", "regularPrice": "1,949.00", "msrpPrice": "1,949.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003S-Electric-Bass-Guitar-Midnight-Blue-1423495785840.gc", "skuImageId": "4003S-Electric-Bass-Guitar-Midnight-Blue/J20317000004000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51423495785745", "price": "1,949.00", "regularPrice": "1,949.00", "msrpPrice": "1,949.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003S-Electric-Bass-Guitar-Mapleglo-1423495785745.gc", "skuImageId": "4003S-Electric-Bass-Guitar-Mapleglo/J20317000003000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51423495785820", "price": "1,949.00", "regularPrice": "1,949.00", "msrpPrice": "1,949.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003S-Electric-Bass-Guitar-Fireglo-1423495785820.gc", "skuImageId": "4003S-Electric-Bass-Guitar-Fireglo/J20317000005000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51423495785710", "price": "1,949.00", "regularPrice": "1,949.00", "msrpPrice": "1,949.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003S-Electric-Bass-Guitar-Jetglo-1423495785710.gc", "skuImageId": "4003S-Electric-Bass-Guitar-Jetglo/J20317000002000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Dissatisfaction with vintage units of this type usually centers around their limited gain, and their inability to sound truly fierce with Drive cranked up to full. The more exemplary users of this type of pedal, however—such as Stevie Ray Vaughan or Eric Johnson, who were both masters of early Tube Screamers—usually kept the Drive control in the lower part of its range, where the sound remains more natural and, yet again, serves as an excellent pre-boost to drive a good tube amp into distortion when the Level control is set high enough. Some players also find older pedals built to this design to have a distinct midrange hump, a slightly wooly tonality, and/or a lack of low end (as ever, depending upon the ears of the player you talk to). Consequently, a lot of newer makers have accounted for these in their redesigns. Visual Sound’s Route 66 pedal has a Bass Boost switch, Ibanez’s own recent-era TS9DX Turbo Tube Screamer has a Mode control that takes you from classic sounds to settings with more distortion and more low end, and plenty of other makers address both in their variations on the circuit.
For guitarists who must have original-era Strat® sound, look and feel, the Classic Series '60s Stratocaster Lacquer epitomizes the instrument during its second decade, when musicians used it to conjure and create electrifying sounds never before imagined or experienced. With authentic features including a nitrocellulose lacquer finish in classic Fiesta Red, everything about it takes you back to a wildly creative time when rock music came into its own—from surf to psychedelia and more—and players started to discover in earnest just what a phenomenal instrument the Stratocaster really was.
So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
the switch is to change pickups and the knobs are for volume and tone. u only need to mess with them if u want to change the sound of the guitar for various songs or styles of music. to tune the guitar u use the tuning pegs on the headstock (at the end of the neck). u need to tune it if it gets out of tune and make sure u replace the strings fairly often especially if u get a nice guitar like a les paul. old strings get tighter and can pull the neck and make it bow forward making it harder to push the strings down to the frets.

At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).

Gilmour was made famous by his haunting guitar scores in Pink Floyd. This “replacement” guitarist surpassed expectations and helped shape Pink Floyd’s unique sound. You can always expect hairs at the back of your neck to stand whenever you hear one of his solos – be it for the first or hundredth time you’re listening to it. All the emotion that Gilmour’s poured into his guitar work lives on in the music and is channeled through anyone who’s ever wanted to cover a Pink Floyd song. I know several guitar players (myself included) who whenever playing the Comfortably Numb solo – whether they are alone in their bedrooms or on stage – have always been unwillingly brought to tears, near the point of crying. How could you not expect things to get esoteric and mystical when it comes to music?
* The guitar comes with very light bendy strings. This is probably due to market data that tells Epiphone that the bulk of buyers for this guitar are teen Guitar Heros who think that string bending every note is an essential aspect of shredding and wailing. If you plan to put heavier strings on the guitar (like 12-51s for example) for jazz or other styles of music then you will probably need a truss rod adjustment to compensate for the added tension. If you don't know how to do this, ask someone who does. You can ruin a guitar, permanently, by being too aggressive with a truss rod adjustment.
In the Spring of 1960 the Kent Musical Instrument Company (20 East 15th Street, New York City) was founded as a subsidiary of prominent New York distributors Buegeleisen and Jacobson. It’s first products were microphones, cables and aftermarket guitar accessories like pickguard/pickup assemblies for archtop guitars and soundhole pickups for flattop acoustics. In 1960 the Marco Polo Company (1055 E. First Street, Santa Ana, CA) began importing Japanese guitars (many by Suzuki), including electrics, which it began to advertise in 1961. Kent began promoting Japanese solidbody electric guitars (mainly Guyatones) in April of 1962, although by the Fall of ’62 the Kent Standard series consisted of Teisco models.
Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.

Re-amplified Distortion: This re-amplified distortion is audible by comparison, when switching between a solid-state and valve amplifier in real time. By paying close attention, it is heard as a fine spurious inter-cluttering within the music. This is clearly noticeable with efficient speakers but not with inefficient speakers. Valve amplifiers are inherently linear. Their natural gain is small and therefore require minimal or no negative feedback.

I have never reviewed anything, however felt that I had to share that this is a complete disappointment. I bought it two weeks ago for my daughters birthday and it is already broken. The mechanism to plug the amp line/chord into the guitar broke, rendering it useless. The amp itself is very cheap and the sound quality was a disappointment, crackling when in use. The strap has holes that connect the strap to the guitar, were too big and would not stay fastened so I had to tie the strap with rope to see that it stayed on while she played.

One of the earliest tremolo devices goes back several hundred years and can be found on 16th century Italian and German pipe organs. Like modern day samplers, these early organs had several auxiliary stops including drums, birdcalls, drones, bells, and a tremulant — a mechanism that opens and closes a diaphragm to vary the air pressure of the pipes. As the pressure varied, so did the amplitude, allowing for both vibrato and tremolo.

The PRS SE range has offered solid, well-built, great-sounding guitars for years now, and the PRS SE Custom 24 2018 is a perfect example. This Korean-built mass of maple, mahogany and rosewood is a classy-looking guitar. It’s a wonderful instrument to play too - PRS's expertise making eye-wateringly expensive guitars is evident from the moment you pick it up. The bridge, for example, has a noticeably low profile. This makes palm-muting a much more pleasant experience, especially if you’re used to chugging away on a Floyd Rose-style bridge. A lot has been made of the SE Custom’s pickups; 2017 models added Korean-made versions of the 85/15 pups used on the more expensive American Core line, dubbed “the perfect pickup” by Paul Reed Smith himself. Largely, they live up to that promise; the bridge pickup is capable of some serious chunky metal tones, which retain definition and clarity even at absurd levels of gain. Spend some time with the SE Custom 24 and you’ll come to realise that there is no stereotype that fits. And therein lies its beauty. It’s not a guitar or a brand that concerns itself with cultivating a popular image; PRS has always favoured more obvious metrics like quality manufacturing, great sounds and classic looks.
This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.
The primary means of identifying the model number of Kent guitars is via a label on the back of the headstock. Through the years many of those labels have fallen off or been peeled off. They do not add anything to the appearance of the guitar. The 700 and 800 guitars had a round foil sticker with the model number and sometimes serial number pressed into it, kind of like Dymo tape labels. The look a lot nicer than the white paper one used on earlier models, but they still can fall off over the years, and they are harder to read.
Fender instruments like the Stratocaster and Telecaster feature bolt-on necks and brighter tonewoods such as alder for the body and maple for the neck. They are easy to work on, and an owner with even a small degree of technical knowledge can fit replacement parts without professional assistance. Fender guitars are built to a 25.5-inch scale length, which lends to their brighter, more percussive tone. You’re more likely to see tremolo systems on this type of guitar, and hot-rodded guitars known as superstrats fall into this category.
You will be able to chord the guitar with comfort and has bend strings. You will be able to play with ease as it has c shaped neck with satin finished. Its three single-coil pickups can allow you to play the rock and jazz sounds, two-tone sound controls, 5-way switches to pick up. ITS Synchronized Tremolo chrome allows you to create a flat pitch and sharp sound. This is just the right guitar in your certain budget to get the best quality assurance and peace of mind. 
Got this beautiful guitar less than a month ago and played a couple of solo acoustic gigs. People were wowed by the way the sound of this guitar fills the space ( I played it through a Bose tower). Loved the feel of the fretboard. Though the body is a jumbo, it doesn't feel like a dreadnought. The guitar looks very attractive too and I had one person come over during a break just to admire the guitar. So now here's why I have given it 4 stars. The electronics were faulty on my guitar. The tuner switch didn't turn off automatically after I hit them to tune the guitar. The light stayed on till the batteries were drained out. This happened twice to me after which I decided to send it back. I also noticed a big hum building up during my second gig with the guitar - I
Following a raft of recent updates, the MS-50G now boasts over 100 effects and 22 amp models, six of which can be used simultaneously in any order. Add a chromatic tuner into the equation, and you're looking at a pedal for all seasons. The very playable amp models cover the popular options: there are three Fenders ('65 Twin Reverb, '65 Deluxe Reverb, Tweed Bassman), a Vox AC30 and a Marshall Plexi. You also get a Two-Rock Emerald 50, while a Diezel Herbert and Engl Invader cover the high-gain side of things. Effects include modulation, filter, pitch shift, distortion, delay and reverb. Most are generic, but some, particularly in the overdrive/distortion category, are modelled on well-known devices - the Big Muff and TS-808, for example. Each patch can be constructed from a chain of six effects blocks, each with a modelled amp or effect, DSP permitting. It all adds up to the most practical, cost-effective way to expand your pedalboard by adding a single pedal.
While it might look identical to the RevStar RS420, Yamaha Revstar RS320 is very different. The shape is the same, along with the most of the hardware. However, the tone is a whole different story. While RS420 comes with vintage humbuckers, the RS320 packs a set of extremely hot pups which are more modern. I personally liked this configuration more than the vintage one, simply because it offers extended versatility.
Lol I agree I'm a nirvana freak, not a kurt freak.... but dam fender all you can make is the same butt ugly designs that you have made for years come up with a compleatly new body design and I mean COMPLETELY NEW and just use the same components or better for a new guitar called, idk caster lol or DOUCHECASTER lol don't matter to me just hive us something new

Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.

Tailpieces are the end of the highway for guitar strings. Or maybe the beginning, since strings are first threaded through or over tailpieces, or pegged into them, before they are pulled along the fretboard for their big meeting with the tuning pegs. Essentially their function is to anchor the strings, which means most guitar tailpieces must be strong enough to withstand the combined tension of at least six strings without lifting off.
In fact, guitarists are on a whole different planet when it comes to defining cool. When you play guitar, you can get away with all kinds of acts normal people could never attempt. Face it: An ordinary dude could not walk down the street wearing a leopard-skin jacket, high-heel cowboy boots, flowing silk scarves and dozens of silver bangles without getting beaten up within minutes.
These Gibson Les Paul Reissue guitars simply perform better than those made the year after or the year before. Gibson is aware of this and has been for quite some time. That's why they've decided to push out a series of Les Pauls which aimed to match the ones from 1959. Are they equally as good? Probably not since the old ones are legendary, but they're as close as you'll get for a brand new guitar.

Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!

Having lived in an apartment when learning guitar, it was painful. Using headphones works, but most days you just want to hear it from an amp like it was meant to be. Your only real solution is to try out some of those tiny lunchbox amps and see if they can fill that void. Another option is to start saving for a house, or find a friend who has one to jam out in.
While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
Your first step should be to think about what you’d really like to add to your sound. If you like the clean tones you get from your amp but can do without the buzzy onboard distortion, consider adding an overdrive or distortion pedal to your rig. If you’d prefer to experiment with chorus, a phaser or a pitch shifter, start there. There are no wrong answers when it comes to effects, and the units you choose and how you decide to use them are part of the creativity of playing guitar.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
{ "thumbImageID": "NTX500-Acoustic-Electric-Guitar-Brown-Sunburst/K47821000003000", "defaultDisplayName": "Yamaha NTX500 Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst", "sku": "sku:site51500000152018", "price": "449.99", "regularPrice": "449.99", "msrpPrice": "499.00", "priceVisibility": "1", "skuUrl": "/Yamaha/NTX500-Acoustic-Electric-Guitar-Brown-Sunburst-1500000152018.gc", "skuImageId": "NTX500-Acoustic-Electric-Guitar-Brown-Sunburst/K47821000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000152019", "price": "449.99", "regularPrice": "449.99", "msrpPrice": "499.00", "priceVisibility": "1", "skuUrl": "/Yamaha/NTX500-Acoustic-Electric-Guitar-Natural-1500000152019.gc", "skuImageId": "NTX500-Acoustic-Electric-Guitar-Natural/K47821000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000152017", "price": "449.99", "regularPrice": "449.99", "msrpPrice": "499.00", "priceVisibility": "1", "skuUrl": "/Yamaha/NTX500-Acoustic-Electric-Guitar-Black-1500000152017.gc", "skuImageId": "NTX500-Acoustic-Electric-Guitar-Black/K47821000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977.
Ibanez are a Japanese musical instrument company. Although Yamaha is a better known Japanese musical instrument company, Ibanez exceeds expectations for electric guitars. This brand of guitars stands out in the world of rock guitars. They gained popularity in the 1980s when they introduced their original designs for guitars based on Steve Vai’s JEM Universal. Their designs have since become some of the biggest selling metal guitars. The Ibanez guitars are used by guitarists such as Steve Vai, Paul Gilbert, and Joe Satriani. In addition, Ibanez guitars tend to be very affordable, giving you a great guitar for a cheaper price.
FuzzPlus2 is an update of our popular free download Fuzz+. The basis of the plug-in is a transform model of a famous vintage fuzz pedal. There are four controls: Fuzz knob: This controls, as you might imagine, exactly how much fuzz is applied to the signal. Tone knob: This controls the brightness of the distorted signal. Output knob: This is the output volume of the device, when it is active. Bypass button: This works just like the switch on a stomp box. When the blue light is lit, you're money. When it's not, the input is passed directly to the output. This can be automated for a slightly different vibe than automating the effect bypass of your host. free vst plugin.
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.
New York City native Joe Charupakorn is a guitarist, author, and editor. He has interviewed the world’s biggest guitar icons including Steve Vai, Joe Satriani, Yngwie Malmsteen, Carlos Santana, Neal Schon, and Dave Davies, among many others, for Premier Guitar. Additionally, he has written over 20 instructional books for Hal Leonard Corporation. His books are available worldwide and have been translated into many languages. Visit him on the web at

Boutique pedals are designed by smaller, independent companies and are typically produced in limited quantities. Some may even be hand-made, with hand-soldered connections. These pedals are mainly distributed online or through mail-order, or sold in a few music stores.[98] They are often more expensive than mass-produced pedals[99] and offer higher-quality components, innovative designs, in-house-made knobs, and hand-painted artwork or etching. Some boutique companies focus on re-creating classic or vintage effects.[100][better source needed]
ESP calls the body shape "Eclipse", which in the case of this guitar, is crafted from mahogany and paired with an arched flame maple top. The body is then wrapped in amber sunburst finish that complements the beautiful grains of the top. The guitar has a maple neck with a thin U profile and a 24-fret rosewood fingerboard. It is meant to play fast and smooth, with its 24.75" scale length and narrow 1.65" nut width. ESP opted for two Seymour Duncan pickups for this guitar, the '59 Humbucker for the neck and the hotter JB Humbucker on the bridge - both of which can handle both clean and high gain tones.

Description: Body: Honduras Mahogany - Body Construction: Solid - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Honduras Mahogany (Bigleaf Mahogany, Brazilian Mahogany, Tropical American Mahogany) - Fingerboard: Ebony - Frets: 22, Jumbo, Medium - Inlay: Abalone Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Floyd Rose Style Locking Tremolo - Bridge Construction: Ebony - Cutaway: Single - Hardware: 1x Volume Control, 1x Tone Control, 3-Way Switch, Sperzel Tuners - Pickups: Humbucker - Pickup Configuration: H-H
Now, you said that most people you see just crank the tone knob to the maximum and leave it there. That’s fine, and some genres of music actually have no need for a tone control. Heavy metal and hard rock and their derivatives have almost no need for tone control. Guitarists either keep the tone knob wide open and never touch it, or they just buy a guitar that don’t have a tone knob (nor a neck pickup). Guitars made and designed for metal are built this way. I think a lot of country musicians also keep the treble wide open to get that biting shimmery single coil tone.
For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."
Pickguards were white pearloid, or sometimes tortoiseshell, the neck used a string tree, and the all-around makeup of the guitar was bigger than later iterations — thicker necks, bigger and heavier bodies, larger fret markers. One obvious differentiator is the logo on the headstock; the earlier models, and even a few released as they moved into Phase Two, had a raised plastic “Univox” logo on the headstock.

“Photocell Tremolo is found in mid-1960s American amplifiers. Those classic circuits used a light-dependent resistor to attenuate the input signal, coupled with a miniature neon bulb that is connected to the LFO. As the LFO oscillates, the bulb gets brighter and dimmer which in turn varies the resistance of the LDR. The varying resistance works with other circuit impedances to change the signal level, which produces a characteristically ‘hard’ sounding tremolo that moves between two levels, reminiscent of a square wave.” Got that? Well it is tricky and they do sound somewhat different but essentially they produce the same effect. The pedal I am using here, the Fulltone Supa-Trem uses a photocell to produce the sounds found in the classic Fender amps and most common tremolo circuit.
Sure, Marshall and Vox contributed to the sound of British rock in the Sixties and Seventies—but let us not forget the mighty Hiwatt DR103. Although it's often associated with the Who's Pete Townshend (who would test their durability night after night), it was a favorite of Pink Floyd's David Gilmour, not to mention the Moody Blues, the Stones and beyond. Although the DR103 looks a bit like a Marshall, it certainly doesn't sound like one. This was the result of a vastly different design.
You may be questioning why we’ve not covered bass pickups in this article. However, to keep things simple, we decided to stick solely to guitar pickups. If you are looking for a new tone or more power for your beloved bass, check out our dedicated articles on Jazz Bass pickups and Precision Bass pickups for all you need to know, as well as recommendations.
Of course, we’ve already mentioned the cool offset Jaguar shape of the body, which will turn plenty of heads whenever this budding bassist hits the stage. But with an active bass boost circuit, you also have the option to bump the sound of this way up past what’s normally afforded in a passive bass. Not to mention, the chrome hardware and the curved vintage logo print on the head really put this bass guitar over the edge visually.

Originally delay was achieved using a loop of magnetic tape - first on improvised arrangements with a reel-to-reel recorder, and later on dedicated machines. The tape would pass through a recording head, then a playback head, then an erase head. The timing of the delay could be adjusted by moving the heads, or changing the speed of the tape. Tape adds its own colour to sound, so the echo would have that added warmth.

Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list 

Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.
One cheaper ampless option mentioned in the article is the Tech 21 Fly Rig used with pedals in front of it – I actually got a $270 Tech 21 RK5 (very close to being the same thing as the Fly Rig 5 mentioned in the article, but the Richie Kotzen signature version with his signature OMG distortion replacing the “Plexi” OD which is on the Fly Rig 5). I’ve used it direct into a cheap PA at practice and it doesn’t sound good to me that way – however, it sounds really pretty good going into an amp, which is what I did for a set-up-quick-and-get-out-after-playing hour-long gig a few weeks ago, plugging into an amp provided at the place we played at. It still didn’t come close sound-wise to my relatively cheap amp setup (hybrid Marshall JMD 50 watt head into Marshall 1960A 4 x 12 cabinet, no additional effects), but a lot more portable of course. So maybe I need to experiment with adding OD pedals to the RK5 for an improvement in sound.
Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
The strings on your electric guitar have a major impact on its sound and playability. If you’ve taken a look at the huge Musician’s Friend guitar string assortment, you’ve likely realized that there’s a lot to consider in figuring out which strings are right for you and your instrument. Keep reading to find the strings that best match your electric guitar, music, and playing style.

Thanks for popping in! Yeah, that g-string issue's a real pain. I also get it on acoustics for the same reason. I've found that, aside from sloping the slot DOWN on the peghead side, if you also try to provide a gentle (side) edge where it starts to head towards the g tuner, that helps too. What I'm trying to say is that you should try to give as clear a path as possible to the tuner to reduce interference/friction. I've tried to illustrate what I mean here: but let me know if it's not clear. More on making a nut here, by the way:
Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.
At the top of the fingerboard, just below the headstock, is a slotted piece of material called the nut. The strings are routed through the slots in the nut and terminate at the bridge, located on the far end of the body. When the strings are plucked or strummed, they vibrate between the nut and the bridge. This vibration is where the sound of a guitar begins. How that vibration translates into sound depends on whether the guitar is acoustic or electric, as we’ll see in a moment.
Having Robert Johnson at the top is a joke. All the kids now think it's cool to like him because he was so "influential" but it's a complete myth. He was virtually unknown until the mid sixties and even then the whole "Robert Johnson is cool" thing didn't get going until around 1970, by which time most of the real pioneers were already well on their way.
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
Orion Blue Book Online (at The Orion Blue Book Online will help you determine how much nearly anything that you own is worth, including guitars. This includes electric and acoustic guitars, as well as bass guitars, amplifiers, and other guitar peripherals. The company behind Used Price works in conjunction with Orion Bluebook, which makes this the largest website dedicated to pricing used musical instruments. The website is browsable by the first letter of your instrument's manufacturer or make. It has every major guitar manufacturer and most obscure ones.

So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
Guitar effects and the boxes that generate them have married theory and practice, history and material, content and form. Such strange logics, inherent to all of these simple devices, radiate sincerity in their transgressive sounds. Or put differently, those “unmistakable sounds,” which can enchant an entire generation, are not entirely intentional, but are born from the accidental collisions between transistors, tubes, wiring, and luck.

The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.

This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.

The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named “Killer,” “No Remorse,” and “Murder One".[5] The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.[6]
The Gibson Firebird immediately comes to mind. This is a smaller, more rounded Explorer-style guitar first produced back in 1963, and it has undergone a wide range of incarnations since. The modern Gibson Firebird HP has a neck-through design with mahogany body wings, a mahogany/walnut neck with a rosewood fingerboard, 495R/T mini humbuckers, and a reverse headstock.

In general, the typical situation is that HSH gives me options of cleaner/thinner/clearer tones which aren't as achievable with HH (even with volume and tone pots in use!). These are options I use very frequently, and I'd feel pretty restricted with HH! Though of course, this isn't the case for everyone. Indeed, I'm quite fascinated at the variety of tones Ron Thal and Andy Timmons get from the overly-simple SH set up they prefer!
Made of mahogany, the Destroyer's iconic body style has been attracting artists for years. It features a mahogany slim neck grip and set-in neck that offers ultra-smooth playablity. Electronics include DiMarzio Air Norton and The Tone Zone pickups for a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters.
You can think of these as distortion pedals turned up to 11. Usually, a fuzz pedal comes in as an accent for solos and intros, since its effect is so strong that it could overpower the rest of the band otherwise. You can hear an example of fuzz in the classic recording of Jimi Hendrix playing The Star-Spangled Banner at Woodstock. This is a good type of pedal to try out as an introduction to more powerful effects.

hey guys im just curious as i just got back from a music store that had to basses from two different brands (local luthiers) and they were virtually the same (5 string, j pickups, Aggie 3 band mahogany body, set neck) the only difference was one had a alder tone block, i personally couldn't hear a difference but the owner of said shop said tone wise it makes a huge difference, any thoughts?

There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.

Because of stiff competition in today's low-end market, guitar companies are constantly trying to outclass each other by improving the quality and value for money of their instruments. One brand that consistently tops in terms of sales and feedback is Epiphone, a sub-brand of Gibson that specializes in quality mass produced guitars. The DR-100 is a great example of their impressive ability to balance quality and affordability, garnering nearly perfect positive feedback for its build quality and sound.
One of the most popular and widespread pickups in history is the single-coil, played by more legends than we can count – from Jimi Hendrix and Eric Johnson, to Jeff Beck and Yngwie Malmsteen. Renowned for their delightfully bright and clear tone, the single-coil is exactly as the name describes – a single set of magnetic pole-pieces, wrapped in a thin wire coil. Simple in design, but complex in their sound, with exceptional dynamics, sparkling highs, and huge twang. They are great for all styles of music, from classic rock to country. Generally found on all kinds of models from a huge range of brands, single-coils are famously the exclusive pickup on both Fender Stratocasters and Telecasters. The DiMarzio DP419 Area 67 is a good example of a great single-coil pickup and a must for Hendrix fans, although check our dedicated single-coil category for more.
Guitar amplifiers vary in wattage. If you're playing to a massive audience, you'll want several 100-watt amps; however, for everyday use, that is overkill. If you merely want it for practice, a 10-watt solid state guitar amplifier will do, and if you're playing to a small venue, you'll probably want to consider a 20-watt valve amp. It's surprising how much sound a little amp will produce.
Pickups convert the mechanical energy of a vibrating string to an electrical signal, allowing it to be amplified, processed and reproduced.[1] Pickups vary greatly in construction, size, types of materials used, as well as various electrical properties, but are generally divided into two categories – single-coil and double-coil (also known as humbucker).[2]

The best place to start is with a small tube amp. This kind of amp is far less forgiving, leaving you nowhere to hide. It sounds counter-intuitive, I know. You’re looking for the best choice and here I am telling you one that will make things more difficult. But think of it as tough love – forcing you to confront your technique and learn the right way to play a chord or scale progression.
The American David Schecter founded his company in 1976 in order to produce spare parts for guitars already available (especially Fender and Gibson). But since 1979 the brand has been manufacturing its own guitars. In the beginning they had only Fender-based models but nowadays, Schecter guitars are clearly conceived for hairy players (but not exclusively), with models like the Hellraiser or the Damien. Among their most famous users are Billy Corgan, Eddie Vedder, Pete Townshend, Mark Knopfler, Matthew Bellamy... And the brand also presented its first amps at the latest NAMM show.

We are really proud of our instruments, but what makes us most unique is our people, and your access to them. The world is full of faceless guitar companies, most are big conglomerates. We have a team of passionate guitar people and are committed to giving you unprecedented access to our team. Each member of the team is focused on supporting you. We treat each player like a Michael Kelly endorser. We value personal relationships with Michael Kelly owners and work hard to give you a level of service not readily available from other guitar brands or retailers. Let us help you get the right instrument!

Guitar speakers typically exhibit a peak frequency response of between 5 and 6kHz, and sound brightest at the center. Because the top end of the speaker's reproduction is limited, the harsh upper harmonics of amplifier distortion are essentially removed, and what's left sounds pleasing and musical. Open-backed cabinets offer both front and rear miking opportunities for a nice blend, with increased low-end "thump" and "chug" emanating from damped low-string rhythm parts.

Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
Ostentatious Delays: If you're making very rhythmic music of any kind, it makes sense to use tempo-sync'd delays, to avoid undermining the main pulse. However, simple tempo-sync'ed delays tend to be masked by the main rhythmic stresses, so they sink into the background of the mix unless mixed very high in level, which makes it difficult to create ostentatious delay effects in rhythmic music without swamping your mix. One solution to this problem, very common in trance music, is to set a delay to a three-16th-note duration, which means that although the delay repeats never step outside the 16th-note grid, they'll often miss the main beats and therefore remain clearly audible. Mike Senior
G&L is the evolution of Fender guitars, no doubt, is Leo Fender expressed by itself, amazing axe, nice sound, in tune, good wood, my ASAT SPECIAL have bird's eye wood on fretboard that looks and feels amazing, the MFD's pickups rocks! nice playability, nice sound, I'll keep mine a lot of a time, it must be on top 10, underrated guitar in my opinion
For example, if you plug into a .7V power amp and you get good sound – great! However, if you plug into a 1.25V power amp and find the signals are weak, it’s not the tonal lack of the power amp that’s the problem. The preamp signals are too weak to be driven to the powerful 1.25V power amp. The issue is the sensitivity input of the power amp is too high for the preamp to be driven well.
In the 1980s, digital rackmount units began replacing stompboxes as the effects format of choice. Often musicians would record "dry", unaltered tracks in the studio and effects would be added in post-production. The success of Nirvana's 1991 album Nevermind helped to re-ignite interest in stompboxes. Some grunge guitarists would chain several fuzz pedals together and plug them into a tube amplifier.[47] Throughout the 1990s, musicians committed to a "lo-fi" aesthetic such as J Mascis of Dinosaur Jr., Stephen Malkmus of Pavement and Robert Pollard of Guided by Voices continued to use analog effects pedals.[48]
Chord CG-10Classically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones.•Headphone output for practice•Switchable clean and drive channels•Classic styling•Power supply; 230Vac, 50Hz (IEC)•Model: CG-10•Output: 10Wrms•Speaker; 165mm (6.5")•Controls: Gain, drive switch, volume, treble, middle, bass•Connections: Guitar input, headphones out (6.3mm jack)•Dimensions; 290 x 280 x 150mm•Weight: 4.0kg

But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.[24]
Everyone has an opinion on Crate amplifiers. Some guitarists are strong supporters, if for no other reason than a fond recollection of a Crate as one of their first amps. Others aren’t as impressed. While it’s true that many Crate models are geared toward beginners and intermediate guitarists, they also have plenty of pro-quality gear in their lineup.
The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. Therefore, Gibson products purchased through The STRATosphere are not covered under warranty by Gibson Brands, Inc.
{ "thumbImageID": "PR-4E-LE-Acoustic-Electric-Guitar-Natural/L19965000002000", "defaultDisplayName": "Epiphone PR-4E LE Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000214448", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Natural-1500000214448.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Natural/L19965000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000214447", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Vintage-Sunburst-1500000214447.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Vintage-Sunburst/L19965000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000214446", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Ebony-1500000214446.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Ebony/L19965000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
In music, a guitar chord is a set of notes played on a guitar. A chord's notes are often played simultaneously, but they can be played sequentially in an arpeggio. The implementation of guitar chords depends on the guitar tuning. Most guitars used in popular music have six strings with the "standard" tuning of the Spanish classical-guitar, namely E-A-D-G-B-E' (from the lowest pitched string to the highest); in standard tuning, the intervals present among adjacent strings are perfect fourths except for the major third (G,B). Standard tuning requires four chord-shapes for the major triads.
{"product":{"id":"113206695","stock":"instock","price":"299.99","name":"Vintage 1960s Maxitone Bruno Sunburst Hollow Body Electric Guitar","download":false,"sku_id":"113206695","checksum":"83818118023","rep_id":"site5113206695","displayId":"113206695","sku_display_id":"113206695","sku_rep_id":"site5113206695","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}
Two new models that would eventually become mainstays joined the Teisco line in ’65. Theye were two double cuts with slightly more flared horns, in a sort of tulip shape. Both had a single, wide, chrome-covered pickup with poles exposed along one edge. This was similar to the old MJ-1 but by ’65 would become the new SM series. Both had bolt-on necks with bound rosewood fretboards and the top-edge rectangular inlays. The E-100 had a bridge/tailpiece assembly, volume and tone on a small pickguard, and one of the elongated Strat-style heads. The ET-100 had a platform vibrato. As a sign of things to come, the Teisco Del Rey ET-100 had a regular Strat-style headstock, the first to appear on Teiscos, as far as I’m aware.
There are many different kinds of pickup selectors. The most common forms of pickup selectors are 3-way and 5-way switches. Obviously, a 5-way switch gives you more pickup combinations than a 3-way switch. Below are some diagrams of what 3-way and 5-way pickup selectors can do. In choosing a pickup selector, I suggest that you try to replace your pickup selector with the same kind of selector. Refer to the manufacturers website and wiring diagram to get the right specifications. Notice I said to get the same “kind” — not the same one. It would make no sense to replace a cheap selector with another cheap selector. Find out the specs on the old selector and buy a nice one.

One look at its distinct bowl-back body, and you already know that the Ovation Applause Elite AE44II is not your average wooden guitar. This distinct back is crafted from Lyrachord, the same material which is said to be used in helicopter blades and more. This results in a lightweight instrument that's not as fragile as wood. Still it does come with a solid spruce top and other wooden components, so it doesn't sound or look too out of the ordinary. Finally, the guitar comes equipped with an undersaddle piezo and preamp system, which features a 3-band EQ and built-in tuner.

If you’re one of those “I plug directly into the amp and don’t need no stinkin’ guitar effects pedals” kinda dude, then godspeed and thanks for stopping by. On the other hand, if you own a pedal board upon which you trip the light fantastic, stick around — this list of guitar effects pedals you must have will validate what you might know, illuminate what you don’t know, and quickly help you generate a massive and highly versatile sound palette.
Originally, the Californian brand created by Randall Smith in 1969 used to offer Fender mods, just like Marshall, to give the amps more gain or, in other words, more distortion. And they managed to seduce Carlos Santana and Keith Richards. The Mark series was the brand's flagship until the introduction of the Rectifier series whose name refers to their current rectifying technology (a rectifier converts AC to DC). Mesa Boogie is certainly the best-known brand after Fender and Marshall. It is still the reference among metal musicians, especially thanks to bands like Metallica and Dream Theater who tend to use Mesa products on stage and in the studio. More recently, Mesa Boogie introduced the Atlantic series that includes the TransAtlantic TA-15 and TA-30. These two amps reflect the manufacturer's interest in the "lunchbox" market.
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
In the early 1960s Rickenbacker history became forever wedded to one of the biggest music upheavals of the 20th century: the invasion of the mop-top Beatles from Liverpool, England. The Beatles used several Rickenbacker models in the early years. Before the group broke up, John Lennon would own at least four. This love affair began in Hamburg, Germany in 1960 when he bought a natural-blonde Model 325 with a Kauffman vibrato. Lennon played the original (which was eventually refinished black but still easily identified by its gold-backed lucite pickguard) on all Beatle recordings and in all concerts until early 1964. 

We avoid providing inaccurate ratings and recommendations that can arise due to the tested product or method of testing being flawed by analyzing large numbers of user and expert reviews to produce our ratings. This has the effect of reducing the impact of single opinions, including potentially flawed ones, in our results. We only end up with a high rating for a brand or product if the majority of reviews are positive and in the case of Seagull the overwhelming majority of reviews of all types are indeed positive.
Treadle-based volume pedals are used by electric instrument players (guitar, bass, keyboards) to adjust the volume of their instrument with one foot while their hands are being used to play their instrument. Treadle-style volume pedals are often also used to create swelling effects by removing the attack of a note or chord, as popularised by pedal steel guitar players. This enables electric guitar and pedal steel players to imitate the soft swelling sound that an orchestra string section can produce, in which a note or chord starts very softly and then grows in volume. Treadle-based volume pedals do not usually have batteries or require external power. Volume effects: Electro-Harmonix LPB-1, Fender Volume Pedal, MXR Micro Amp, Ernie Ball Volume Pedal.
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.

We have covered pickups here before so rather than running over old ground I suggest you read that article to get an understanding of the different types of pickups an electric guitar uses and how they work in greater detail. For the purpose of this article, however, all sound starts with your pickups. Pickups are essentially magnets, generally 6 small magnets wrapped in a very fine copper wire (over 7000 times), and can be better described as magnetic wire coils.

When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.

We as a team are always extremely inquisitive and wondered about something, which can be anything, happening around us. One day we planned to share these things which are enough to spice up soul of internet freaks and we made Here on, we pick, research and display some really cool examples which hit us somewhere in our daily lives. The website let the visitors to explore chunk of daily stuff they may need to know about. You will get a bunch of trending information from around the globe. Every latest buzz, from footpath to limelight, we have it all, in Article, Charticle And Listicle way with the categories- Taza Khabar, Hottest In Cinema, Top Tenz, Education, Jobs & Career, Tech In Trend, Sports. So, if you’re a viralmaniac, quench your thirst here!
Kill Switch A kill switch abruptly stops the sound while it is active and lets the sound play again whilst not active. On guitars with a pickup and pots configuration like that of a typical Les Paul this can be achieved by turning the volume for one pickup off and playing with the pickup selector in the middle position. Whilst holding a note, the player can rapidly switch between middle pickup and the silenced pickup giving a stuttering effect. Do this at your own risk because rapidly switching pickups will inevitably wear your pickup selector. This effect is sometimes implemented by a pedal which is only active while it is pressed down (unlike most pedals which are one click on/one click off). Some people will also modify their guitars to add a dedicated killswitch.
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved spruce top, back is not carved but is arched by bracing, rosewood back and sides, 5-ply top binding with pearloid outer layer, elevated tortoise pickguard with b/w binding, backstripe of two horizontal lines surrounded by two rows of diag lines (like a Style 45), bound ebony fingferboard, style 45 fingerboard snowflake inlays, trapeze tail piece, vertical "Martin" peghead logo, bound peghead, gold plated parts, sunburst top finish.

3,000 to 8,000 Hz - Brilliance and Presence: This is the range that can add shimmer or allow a guitar to cut through a mix when boosted. It can also be where you make cuts to keep a guitar from conflicting with a vocal. If making boosts in this range, keep an eye (ear?) out for noise, as any noise present from distortion/effects pedals will very quickly be accentuated as well
Now that we have laid down the foundation and discussed the basics of electric guitars, it's time to check out some of the best models on the market. Keep in mind that a definition of a 'best guitar' is highly dependent on the person you are talking to. With that said, we feel that our selection is fairly neutral and highly informed, and fits most norms out there. Let's dig in.
Taylor’s proprietary pickup system, the Expression System, consists of ahumbucking induction pickup mounted in the neck and a pair of dynamic soundboard transducers wired to an on board preamplifier designed by Rupert Neve.[10] The entry-level 100 and 200 series use an externally similar system known as ES-T, which utilizes a single under-saddle pickup and no soundboard transducers. The first generation system was powered by a pair of AA batteries. Starting in 2007 the electronics use a 9-volt battery similarly to common piezoelectric and microphonic pickup systems in other guitars.

Whereas tube amps are the traditional, solid-state amplifiers represent the modern guitar amplifier (even though they have been around for decades). While some guitarists refuse to consider solid-state amps worthy of their time, models such as the Roland JC-120 Jazz Chorus are proof that solid-state amplification is not only capable, but preferable in some cases. This high-end amp offers 120 watts of power, professional-grade tone and awesome versatility. It’s a good reflection of this segment, which offers endless versatility with affordable prices, low maintenance and incredible reliability.
I don't think its objective that sweep picking is better than tapping. I mean all of these techniques are great. One could say that vibrato is the best technique. But for me both tapping and sweep picking are great. Tapping kinda sounds like emotional/crying to me. While sweep picking kinda sounds like some fighting/running, I mean fast paced. - zxm
Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
Besides its classic vibe, the best part about this guitar may be its Broad’Tron pickups. These were designed specifically for the Streamliner, and are known for their throaty midrange, booming lows and sparkly highs. They’re also louder than Gretsch’s other popular pups, the Filter’Tron, so push them hard and they’ll snarl and scream. Dial back the volume knob, however, and you’ll encounter the warmth and rounded tone for which Gretsch hollow-bodies are known.
Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.

The instruments have been set up at the factory. However, time, temperature, and transportation are a few of the many things that can cause a guitar to go out of "intonation". We recommend that you get your new guitar set up by a qualified luthier upon delivery. We recommend taking it to a qualified guitar tech for a set up. They will adjust the neck and bridge to take out the buzzing. We ensure that before shipment there is no evident of fret buzz before shipment and the guitar plays beautifully since our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. We believe that your Local Guitar Shop can properly and safely adjust the truss rod and setup the guitar correctly for issues of fret buzz and bow neck. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod.
Many modern players use the first joint of the thumb against the back of the neck, and almost on the upper binding, sort of like gripping a baseball bat, so they can reach over the neck with their thumb tip to play bass notes on the E and A strings while picking melodies out with the other fingers. Tommy Emmanuel, and Andy McKee are particularly adept at this. You’ll need to experiment some to find what works best for you.
Here for you is a beautiful Vintage 1964 Epiphone Frontier FT-110 acoustic guitar. This guitar is 100% original and comes along with it's original hard shell case. The guitar plays and sounds just great. These Epiphone guitars were made with a full 25 1/2" scale. The sound is just outstanding and the playability is fantastic. If you have any questions, feel free to either email us at or call .
In addition to pickup selection, most guitars will have controls for volume and tone. Volume controls simply regulate the strength of the output signal. Depending on the amplifier, this can control the tone as well as the volume. Most tone knobs control high frequencies and many guitars have separate tone controls for each pickup. This can vary a guitar’s sound between soft, warm, and mellow to a very bright, raw, distorted sound.
Mention the subject of American acoustic guitars and one of the first names that will undoubtedly pop into your head will be C.F. Martin. Not that there aren’t many other estimable names, but Martin, by virtue of its longevity � since 1833 � and incredible quality remains the standard by which almost all steel-stringed acoustics are judged. A pretty impressive achievement.
If you’re into guitar and its majestic world, we strongly advise you to get your hands among the best options. That way, the musical enigma will reach its pinnacle. We here would help you around with the list of best and famous guitar brands available in the nation at present. To be fair, even the best guitarist in India uses these ones for their musical rendering.

When buying your first guitar, the cost is always a matter of consideration. Be careful not to let this become the focus of the search otherwise you run the risk of compromising on quality. Think about it, you don't want to learn on the shoddy piece of equipment. You can usually get a good value with proper research. If you have a friend who plays the guitar; find out if they are willing to give you the benefit of their experience.
I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.
From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.
Which guitar brand should you choose? It is one of the common questions which arise in every music lover’s mind. The basic answer is to find a guitar which can fulfill which fulfills all your demands and within your budget. However, for an appropriate solution, a user should check out all the features in a guitar before deciding which model to buy.

Ibanez is a Japanese guitar company that started out making outstanding copies of classic guitars, and has gone on to be one of the most revered guitar builders in the world. This is one of the top brands of heavy rock, and Ibanez instruments are known for the thin, fast necks and outstanding build quality. They’ve also led the way when it comes to 7-string guitars.
EQ (Equalizer) – A frequency-based effect that allows you to boost or cut frequencies along the audio spectrum. Graphic EQ pedals such as the GE-7 and GEB-7 have faders for each frequency band that you can move up or down to boost or cut the frequency. EQ pedals can be used to tackle problem frequencies such as mid-range honk or to give a bass boost or add some high end sparkle. Alternatively you can use EQ to create interesting tones such as emulating a small radio by rolling off the bottom end and boosting the high mids.
Just SOLD #2 another fine example of the vintage 1960s era J200 copy by the great luthiers at Alvarez in the mid 1970s - the 80's WoW very well done impressive... Alvarez from over 40 years ago. This example is JVG rated at very good + 8.6/10 vintage condition with beautiful patina and character mojo as well so cool Gotta love this Beauty! This instrument has received our JVGuitars "set up" and several upgrades as well we have installed a new set of Martin 80/20 bronze Marquis strings for a crisp tone with great bass and volume as well as a Martin solid natural bone nut & a compensated saddle set custom fit into its original fully functional adjustable bridge with plenty of room for up or down adjustments to your personal taste further upgrades do include throwing out the old plastic tone robbing bridge pins for the superior resonation of solid ebony wood with brass ring and beautiful abalone inlay bridge pins and this was for tonal reasons and it looks much more high end as well, then we removed the old economy tuners of the era ( a weak point ) and installed a set of Grover tuners old holes were touched up in the process looks good and works excellent now to keep this guitar in tune and as a side benefit the added girth at headstock increases sustain as well. The medium slim profile C shaped neck is 1-11/16ths at the nut and also is pretty much the same as the 60's Gibby profile the frets are the originals as well and still playing well without buzz as per JVG set up. Truss rod is working fine and the headstock is looking cool with its Old School script Alvarez mother of pearl logo and crown design with its patina and cool old Alvarez Truss rod cove this guitar is striking as well. Great sounding like a Piano wow and she's playing with ease with excellent string action now. She retains her excellent vintage Sunburst and finish still shines nicely of course she is not new or mint it has some natural finish checking several that only adds to its Mojo along with several doinks here and there on the body and top a few that caught edge near binding on front and back not so big rather small and small paint had chipped off and so I addressed them with a fine tip matching color lacquer tip pen to touch up and to help preserve original finish integrity and looks much better as well. We also installed a replacement pickguard and it fits perfectly and looks great too. The 1960's VIBE and this instruments playability makes this an excellent choice for that SWEET Jumbo tone well crafted over 40 years ago Vintage Script Logo on headstock inlayed in mother of pearl on correct law suit era open book Gibby style headstock. Made in Japan well taken care of all these years and ready for you to enjoy another 40. Overall she is SWEET! Contact Joe to buy:
The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.
In general, the typical situation is that HSH gives me options of cleaner/thinner/clearer tones which aren't as achievable with HH (even with volume and tone pots in use!). These are options I use very frequently, and I'd feel pretty restricted with HH! Though of course, this isn't the case for everyone. Indeed, I'm quite fascinated at the variety of tones Ron Thal and Andy Timmons get from the overly-simple SH set up they prefer!
The Effie U1935 thinline hollowbody ($220) was a bolt-neck ES-335 copy with a bound rosewood fingerboard, blocks, open book head with outlined logo decal, two 12-pole/slit humbuckers, finetune bridge, fancy harp tailpiece, three-way on the treble cutaway horn, elevated pickguard and two volumes and tones. The Effie was available in orange sunburst, cherry red or jet black. It is entirely probable an earlier version of this existed, since thinline versions of the ES Gibsons were already mainstays in Japanese lines by ’68. If you find one with the old plastic logo, don’t be surprised.

Can be useful after the distortion pedals to shape the sound, and they can also be used as a boost pedal. Remember that boosting here will increase the signal going into the following pedals, and in some cases this may cause 'clipping' (unwanted distortion if the input to a pedal is too high). I don't tend to use EQ much these days, but this is where I placed it when I did, just be careful with how much you boost.

The most defining feature has got to be the neck. It’s thicker than the standard Strat neck, which gives extra meat to work with when bending those strings. Even the fretboard was designed around this technique, with its narrow frets and flat fretboard. It’s not the cheapest one out there, but Fender Stevie Ray Vaughan Stratocaster is definitely one of the best Strats around.
Capacitors are typically used as filters to control tone. In most cases, they are used to filter out very high frequencies before being sent to ground (the output jack) which controls the warmth of your guitar’s tone. Capacitors vary greatly and come in a range of materials from ceramic, film, paper and electrolytic (mainly used with active pickups).
To set up guitar pedals, use a short patch cable to connect your guitar directly into the tuner pedal if you’re using one. If you’re using filter effects pedals, like auto-wahs and envelope filters, connect them next. Plug in your compressor pedal after the filter pedals, followed by pitch-shifting, overdrive, and distortion pedals. Set up your modulation pedals, like chorus, flanger, tremolo, or phaser pedals, near the end of the chain so they’ll have a richer sound.
David Gilmour: Two models of Gilmour’s famous “The Black Strat” are available from the Fender Custom Shop: One is an American ’69 Strat body with an ’83 remake C-shaped ’57 RI maple neck (labeled as New old stock) with electronic and cosmetic modifications. The other is a”relic” style guitar that replicates the “The Black Strat” down to every scratch and dent. The relic version has two completely different coats of paint, just like the original.[16]

There isn't a shredder on the planet who doesn't remember their first electric guitar. In fact, it's for that exact reason why your first electric guitar should built with meticulous attention to every detail. In this section, you'll find an impressive range of beginner electric guitars that were designed with your ambitions in mind, so you can enjoy sharpening your skills on that same special instrument for many years to come. Everyone who has a passion for playing music deserves to hone their craft on an electric guitar that is a perfect balance of playability, beauty and tone. But that sentiment especially applies to beginners, so they can build the confidence necessary to continue on with the instrument. Thankfully, all of the most well-known guitar brands specialize in their own beginner electric guitar models. From Ibanez and Epiphone to ESP and Dean, these companies take great pride in nurturing the skills of future pluckers, strummers and shredders. Squier is no stranger to the world of beginner guitars, and their Vintage Modified Jaguar HH electric guitar is everything a budding up-and-comer could ask for. Featuring a 24'' scale fast action neck, and a set of Duncan Designed pickups for a multitude of humbucking tones, the Squier Vintage Modified Jaguar is an updated sunburst classic that looks and plays like a dream. Another big-seller is the Epiphone Les Paul 100 electric guitar. Consisting of open-coil humbuckers and a genuine Les Paul sound, this axe contains superb electronics and a solid tone, while the tune-o-matic bridge ensures you that this beauty will stay tune through an abundance of practicing. It's incredible to think that at one moment in time, Jimmy Page had difficulty forming an open chord, or that Eddie Van Halen had trouble with hammer-ons. But even the greatest guitar players had to start somewhere, just like you. Every guitar player improves with time, and when you have a beginner electric guitar that's constructed by professionals, the learning stages feel will less like a duty, and more like the start of an exciting adventure.
Enlarging/ Drilling Holes: Often required to upgrade tuners, or occasionally to change control pots. Enlarging a hole in wood seems simple enough, and it is. But it's also an easy way to ruin the finish of the guitar and worse. The problem is because there is no wood in the center of the hole, the edges pull upwards instead of cutting. It often results in large ammounts of chipout or worse. The answer is to run the drill BACKWARDS. This will ream the hole out without the risk of chipping. If the hole needs to be made significantly larger, it is often best to use a bit one size up from the desired hole size and run it backwards till the drill has gone just below the surface. Now you can drill the desired size hole normally relatively safely. The washers or dress rings will hide the slightly larger starting bevel that remains. Whenever possible, drill half way through from both sides or clamp a "backer board" in place. Do NOT use much pressure on the drill, let it do the work, excess pressure is usually due to dull bits, and almost always results in some king of damage. If you must drill through the finish where there is no hole use the same method as described for significantly increasing the size of a hole, but apply masking tape over where the hole will be drilled prior to starting.
For the most part, you might want to get a preamp that has at least some type of EQ on it. Tone shaping on an acoustic electric guitar can really give you an edge or at least a semblance of control before the sound guy butchers it during your gig, although you can do this with an effects pedal. Even though this is something that takes the time to learn, it's better to have the option readily available when you decide to step up to that level.
Guitarists have their own special system of music notation called guitar tablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a wide variety of music without ever having to learn how to read standard sheet music. Though guitar tabs aren't a perfect way of describing music, they've allowed newer generations of guitarists to quickly and easily share information about how to play songs across the globe via the internet. Every guitarist should have at least a basic understanding of how to read tablature - it's the de facto shorthand for much of the guitar music you'll find written out online.

After your design has been properly plotted out on the poster board you can cut it out with an exacto knife. Make sure you stay as true to your lines as possible so you have a nice clean line to trace once your ready to. Then lay out the template on body blank and trace away. I like to cut the piece of poster board the same size as the body blank I am using. It makes it a lot easier to line everything up that way. Now you're ready to move on to the next step.

In 1971 Larrivee began adding inlay designs to their guitars and in 1977 inlays became a standard for their guitars. Beginning in 1978 their inlay designs took on a more romantic style. Since 1979 all engravings were designed by Wendy Larrivee except for a 1998 inlay called the “Joker.” In 2007 Larrivée began using laser engraving for their inlays.

In the 1970s and ’80s the sound of the electric guitar was stretched in heavy metal music. As one of its leading practitioners, Van Halen pushed his self-built “Frankenstein” (based on a Stratocaster but with a mish-mash of other guitar parts) to the limit, experimenting, for instance, with “dive-bombing,” which uses the tremolo arm to drive the guitar’s lowest note ever lower. Hendrix had done this but forced the guitar out of tune as a result. However, by the mid-1980s, inventor Floyd Rose had improved the tremolo system, allowing players like Van Halen to dive-bomb repeatedly. The guitar sound was now not only loud but also really raucous, flashy, and a bit dirty—just the way musicians, and their fans, wanted it.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods....with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.
So you’re thinking about building an electric guitar. Well, it’s a very rewarding experience when it’s done right, and you have the ultimate freedom to make it whatever you want. On top of that, it can be a money saving alternative to the hefty price of a good instrument, if you’re willing to invest your time. Or if you’re just planning on undertaking a fun project, it can certainly fit that bill too.
I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.

That's a bit if an exaggeration but you're allowed. I would venture to claim that the snobs are those who proselytize Fender and Gibson as being the best (especially Gibson). It's been demonstrated a million times over that they are not. Which does not mean they don't make guitars many people want and like. Especially Fender (I have a GREAT Highway One Strat) who have managed to reach a wider audience with the pricing structure of the Fender brand than Gibson has with the Gibson name. The reason we see so many of them in the hands of pros (and their sheepish followers) is that these companies can afford to buy "stage presence". I would put PRS in that group too; however PRS makes better production guitars than both the above. And I'm not being a snob since I can't afford a PRS.
As compared to the musical giants like Epiphone and Fender, Davison Guitars is just a family-owned, small-scale manufacturer. But the reason for the Davison Guitars Beginner Starter Package becoming an Amazon Bestseller, is the fact that it provides beginners with the opportunity to begin with a simple, decent-sounding and easy-to-manage full-scale electric guitar. You also needn’t scurry around for the necessary add-ons that are required. Neither do you need to decide and pick between a stylish Les Paul or Stratocaster. Starting off in full-scale certainly strengthens you as a learner. Now, not many electric guitar starter combos or bundles offer that kind of value; despite certain shortcomings, this product is here to stay. Not only can it fit your requirements, but it’s even ideal for gifting purposes!
An electric guitar with 6 strings, dark blue metallic in color without case. It is has its body made of rosewood and its neck from the maple. The fret boartd is made from rosewood and has dimension of about 106.7 x 52.6 x 12.4 cm. The guitar goes for about INR 13,990 depending on prevalent market factors. you can get more information by clicking on the following link:
Since there is little difference outside of the individual guitars featured in this series, I will nitpick a bit and say that RealLPC has the worst GUI of the four.  Where there was never any difficult-to-read text on RealStrat, there is some here, and the weird navy green parameter boxes along with a black Les Paul with gold trim doesn’t sit well for me.  
Compared to the previously mentioned good guitar brands, ESP (Electric Sound Products) guitars are relative newcomers to the scene. The Japanese company was founded in the mid 1970’s, and they produce mostly electric guitars and basses. The company became very popular among metal guitar players, however they are versatile enough to be used for any style.
The panel on top carries the controls for an old school look and feel overall, consisting of a master volume, gain, bass, treble and the model AC10 comes equip with a built-in reverb effect that makes it even more powerful and articulate to use. This amp is at top of its class when used at home, awesome for a recording studio and bringing it on stage to cover a small to medium size venues.
Ibanez: Ibanez is a Japanese company whose origins date back to the early 1900’s with a company named Hoshino. They where distributing Spanish guitars with the name Ibanez around the middle of the century and in the 60’s where shipping guitars to the USA. Back in the 1970’s, they became quite known for making copies of famous guitars, putting the Ibanez name on them and selling them for considerably less than the original models they emulated. During that time, Ibanez got really good at making guitars so they started creating some original models of their own. The production of copies finally ended in the late 70’s after a big lawsuit by Norlin (Gibson parent company) against Ibanez. This is the reason why the Ibanez Les Paul copies with the iconic “open-book” headstock are called “lawsuit” or “pre-lawsuit” models. Interestingly enough, although not very expensive, those lawsuit models are quite desirable today fetching interesting prices on eBay.
The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
Many inexpensive starter guitars are built with laminate tops, made from several layers of wood pressed together. While laminate is durable and can be quite attractive, it will not produce as pleasing tones as solid wood. To a lesser extent, this is also true of the guitar’s back and sides—solid woods will produce better tone. When reading guitar specs, if you see terms such as “select spruce top,” that indicates the top is made of laminated woods with a spruce-like grain pattern imprinted on it.
Be careful. Don't be rash. With the quality of Gibson's 2016 guitars, you should never have too many problems but... if in doubt with an older guitar, take it to a guitar repair pro. You won't need to do it often at all. And it's best to book-in your guitar with an explanation of what you think is wrong. Basic premise: T.L.C. for your guitar, and you'll feel the love back. Oh, and keep your guitar clean!
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.

Music Theory for Guitarists by Tom Kolb is one of the most comprehensive ways to learn music theory from a book that we can recommend. This book, and the combination of online audio that accompanies it, has helped many aspiring guitarists learn theory after being frustrated with trying to learn how to play the guitar. One reason that might be is because Tom uses very plain language to explain theoretical concepts that are often confusing and can come off as complex. Further, the book includes diagrams frequently, which really helps visual learners.

“I like it because it’s light and simple,” Alana said, reflecting on its 5.1-pound weight. “It’s easier to get my hand around the neck on this one,” Charles noted. Both found the Les Paul Express’s rounded top shoulder to be more comfortable than the horn-shaped cutaways on most of the other short-scale models, and they felt the smooth finish on the back of the neck made it easier to play. The adults agreed. “I’m surprised—for a small guitar, it’s fun to play,” Ken Rosser said.

For my tastes, position 1 on a clean tone can be a bit too boomy. Even if one backs the volume a bit to take the edge off, it doesn't quite suit acoustic-style strumming. Position 2 is perfect for these sorts of things, though. I'd always use it for the small high chords you often find in funk and reggae. Position 2 is also a nice way thinning a distorted tone without it cleaning up too much, like Position 1 with the volume dialled down does. If you have your rig set so Position 1 screams, Position 2 will sing.
Look at the action. Action is the distance between the fingerboard and the string at any given time. Make sure you hear no buzzing from the guitar when playing a note at a normal weight. Try it at the 5, 10, 12, fret, etc. and listen for the 'buzz' of strings banging on the frets below it. If any guitar is like this, ask the music store (any good one will do this for you) to adjust the neck if you can try it out in playable condition. If they can adjust it for you, then there is no problem, it just needed adjustment.
Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.
I am writing this due to the mixed reviews that I read before buying this. This is a really powerful device. I have had a POD 2.0 for years. This is just as good and is also small, portable, and inexpensive. Most of the criticism that I read is that it is not well made and durable. It is well made, but I don't think it is designed for gigging. It is perfect for practicing or interfacing with a home studio. If this is your application, then you will be very satisfied. One other thing that I found true of this and similar devices that I own is that the quality of the headphones makes a big difference. If you use studio quality headphones it will sound great, if you use music player headphones it will just sound good. I haven't ... full review
While there are many exquisite guitars that can easily take this spot, this one hit the shelves in 2016 and is the A-grade of what Gibson has to offer!  The Gibson Les Paul Standard 2016 T Electric Guitar is a testament to Gibson’s fine craftsmanship, tone, and reputation – that’s why it’s our top pick and is the best all-round electric guitar for serious users who want the prominence and notoriety of owning a Gibson!
Martin’s first era of flirtation with electrics ended with its GTs, and, in terms of American production, wouldn’t resume until a decade later. However, in 1970 Martin joined the growing list of American manufacturers to begin importing guitars made in Japan, introducing its Sigma series. In around 1973, Martin, like competitors Guild and Gibson, began importing a line of Sigma solidbody electrics made in Japan by Tokai.

You finally bought that guitar you've been eyeing for a long time. You open the case, gently remove it from its plush cradle, and hold it in your arms. A fresh pick in your fingers, you begin an elegant and complex arpeggio that ranges across the fretboard. Suddenly, right in the middle of the run, the strings start buzzing. You check your technique and it's fine. So what's the problem?

Great post man. I’ve been playing guitar for close to 15 years and when I was just starting out it was tough to know where to begin when it comes to tone. So many people advised me on getting a bunch of gear and spending money on amps, pedals and other enhancers but for me when I was just starting out it would have been great to read something like this!

For die-hard metal players looking for best electric guitar brands, Dean is another famous name you wish to check. The iconic ML design has become a signature instrument for rock because of Damageplan and Darrel Abbott of Pantera (late). In the ’90s, ML was revived by Dime, and then Dean stretched out the idea while sharpening the designs of it with a modern touch.
“The acoustic guitar is something you can travel with easier and make money with easier,” Salas said. “When I used to tour with Rod Stewart, we had jets and gigantic trucks but now there’s no record-company support so no there’s tour support. Record companies aren’t offsetting the tour expenses because they can’t make their money back in record sales.”

Now you should have all you need to assemble your first effects pedal. Make sure you have a clean, well-ventilated area to work. Wash your hands before you start. If you like, wear some conductive nitrile gloves. Avoid handling components any more than necessary. Contaminants on the components and PCB will make them harder to solder and can cause reliability problems. Certain IC’s can be damaged by static electricity from handling. Solder is hot and creates dangerous fumes so be careful. Follow the instructions carefully, in particular making sure you insert components in the correct places and the correct way around. Many components look alike and some are polarity sensitive, so take your time to get it right. Solder one pin of a component and then double-check it before soldering the rest. It’s much easier to move or remove a component with only one lead soldered to the board.
Open Loop Gain: Feedback Solid-state amplifiers are inherently nonlinear. They have a very large ‘open loop gain’ approx 20,000. The amplifier output is (feedback) to the comparator input to reduce the gain to approx 50. Therefore 99.9% of this feedback corrects all instability and non-non-linearity of the amplifier, as explained in amplifiers. The speaker also acts as a large microphone. All non-linear movements and vibrations within the speaker cone, (caused by reflected nodes, chaotic resonances etc) of which there are many, are regenerated back into electricity by the voice coil. This re-generated signal from the voice coil is inadvertanetly fed-back to the solid-state amps comparator input, and re-amplified back to the speaker as recycled distortion.
If you have ever played or listened to metal, you probably know about Ibanez. This brand has been around for a while and has become a patron saint of those who like harder sounding music. Built for speed, Ibanez guitars bring are finely tuned instruments which enable the player to explore the limits of their skill. On top of that, any Ibanez guitar is going to be great value for the money.
pay is about HALF of what it should be for this expensive of a product, when a factory is turning out nearly $1 million a week in profits from one factory with less than 50 employees, they should make more than the salary cap of $12-$15 per hr, the only reason you make a decent living wage is because you work so much you don't have any time to live. You may have time to go home and sleep (and eat something, if you're VERY lucky, most days i don't even have the energy to wake up and eat once i get home.
Taylor has swiftly made several electric guitars that made their way to the hands of professional guitarists onstage. Moreover, a few of their models are directed towards working players too. In fact, Taylor seems to be caring about the beginners and intermediate level players as well, since they produce several guitar models aimed at these customer groups. If you are ready to scour out your wallet to get your desired guitar, Taylor will be the perfect choice for you.
The best acoustic electric guitars solve the inconveniences of playing a traditional acoustic in a very preferable way. No longer do we need to play a guitar size and shape we don't enjoy in order to project more volume. We don't have to strum and pick harder. We don't need the nuisance of setting up and staying positioned behind a mic to be heard through the loud speakers. Today we look at how this is achieved and share our top recommendations for every budget...

The best advice any guitar player can give when it comes to figuring out which guitar to get is to buy the best model your money can afford. In most cases, this advice is rock solid. Even if you are a beginner who isn't sure whether or not you want to commit to playing guitar long term, you can always sell the guitar with a minimal loss, like a decent car versus a junker.  Think of it as an investment as long as you maintain and take care of it.
Because there is no inherent right or wrong amp, the suitability of the end gadget will depend on your personal taste and the tuning of the ear. Quality guitar amplifiers are designed to precisely reproduce sound while maintaining a clean and accurate tone. You can find acoustic and electric guitar amplifiers from brands like Fender, Peavey, and Blackstar.
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.
Players who wish to self-appraise their own instruments have a number of options for finding a guitar blue book online. A number of websites that perform the same function as Kelley Blue Book for cars exist for guitars. You may just be interested in knowing how much your prized ax is worth, or you may be looking to buy. Either way, the internet can help you determine the fair-market value of nearly any guitar.
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It's been suggested that Maya may have been responsible for the Aztec badge. You'll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.
Seagull S6 Original Acoustic guitar is one of the best gadgets for the beginners in the list. It comes with the beautiful texture of domestic wild cherry back and sides that give it a unique tone. In addition to that silver leaf maple neck with a rosewood fretboard lets the fingers to have a perfect grip and easy tuning. It’s a power pack guitar to get you the best playing experience and hands on many of the tricks you are looking for.
The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.

I have a Hohner DC. It is either a MIC or MIK. It does not have body, or neck bindings, but in every other respect is very nice. It was one of the first guitars I got when I started paly about 5 years ago. As a matter of fact, I had not played it for over a year - I recently got it out of the case, re-strung it and played it regularly for a couple weeks. I have been going over my colection looking for things I could sell off, but I decided to keep this one.
The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.
Guitar strap: If you intend to stand up while playing on guitar during live shows (and most people do), then you need to practice in the same position like when you’re playing live. Your muscles and hands are in a completely different position when you’re sitting down and when you’re standing, and that’s why you MUST get a strap right from the start and practice standing up, as well as sitting down. Price: $10 – $15 should do the trick.

1Note that no signal processing is instantaneous, so every effect adds some small delay. For digital effects, this is the measurable and sometimes notable latency of something millisecond-ish (hopefully not more than a few ms). In simple analogue effects like distortion it's at most in the nanosecond range and basically neglectable. Any equaliser/filter component also introduce phase delay, which can be interpreted as delaying various frequencies by different amounts; but this too is normally not noticeable and works quite differently from a digital delay.
{ "thumbImageID": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "defaultDisplayName": "Brian May Guitars Brian May Signature Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274319719826", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Black-1274319719826.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Black/512637000001000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Cherry", "sku": "sku:site51274319719831", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Antique-Cherry-1274319719831.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Though these pickups can be modded to fit in other guitars, the Antiquity Jazzmaster flat coil design is intended to serve as an upgrade to the Fender or Squier Jazzmaster series. Popularized in the late ’50s and ’60s, the classic Jazzmaster tone is rich and crisp but, without harshness on the higher register. This pickup comes in both a neck and bridge version that work together to cancel noise and produce that same rich tone with some extra snap and good string response coming out of two Alnico magnets.

Gibson now restricts the use of the name Dobro to its own product line, but care should be taken in interpreting documents written before 1993 or from outside the US. In these cases, the terms “Dobro” and “dobroist” may not necessarily refer to a Gibson Dobro. For example, consider the references to the use of a Dobro guitar on songs like “The Ballad of Curtis Loew” by Lynyrd Skynyrd, “Valium Waltz” by the Old 97’s, “When Papa Played the Dobro” by Johnny Cashon the Ride This Train album, or “Gold Dust Woman“, a song by Fleetwood Macfrom the album Rumours which features a Dobro. Mark Knopfler of Dire Straitsis famous for his guitar of this style, featured on the cover of the album Brothers in Arms.[2]
If you're new to distortion and overdrive pedals, you might be wondering what the difference is between them. For the most part, they do the same thing and are both often referred to as gain pedals. How they differ is that distortion pedals usually provide a harsher, grittier tone with increased sustain. When it comes to distortion, think of genres like grunge and death metal. On the other hand, overdrive pedals are designed to emulate the sound of a tube amp when you increase their volume. The result is a warm yet crunchy sound that's ideal for playing blues and classic rock. Of course, one is not better than the other, and the right distortion or overdrive pedal for you will be a matter of personal preference.

As a long time player conveying the skill, craft and passion of this art, which is as much as a science, players of ANY and every instrument can unanimously agree that there are no “best” players. Some have great moments that were captured and regurgitated in the media time and a get which put them in a permanent vista. This is greatness? Hardly. I’ve seen A LOT of players, some included in the article and the majority chanted by the readers on this board screw things up beyond repair–some during the opening of their first song of the performance. OUCH that hurts…but it happens. Some completely lost track with what they were doing during a show casing of their solo work…oops. Yep it happens, like sometimes happens to singers who forget their lines–it doesn’t matter that they have written the song they were performing. Yea, we hear about this stuff every now and then, however at the end of the day, this doesn’t matter. The truth is, people hear only what they want to hear and will by their very disposition, ignore the negatives and embrace the positives of their work–alas this is why this supportive listeners are called FANS.

So, I've done what any self-respecting woman with a rather obsessive personality could do and trawled YouTube for all the best videos of Swift performing stripped down versions of her songs where it's just her singing against a minimal melody. I'm sure you'll agree that as much fun as queen of the squad, awkward dancing hero era Swift is, that these videos are all the proof you need that she doesn't need dance moves or supermodel friends on stage in order to rule.
Fender California Coast Series acoustic guitars are already being used across multiple musical genres by top alternative, indie, punk and grunge artists/bands, such as: Culture Abuse, The Regrettes and Dear Boy, as well as singer-songwriter Aaron Lee Tasjan and guitarist Angela Petrilli – accompanying each on their musical journey toward exceptional artistry.
Guitar Tricks has a special Discount Coupon Code that will make it even cheaper for the first month. You can get 60% discount if you choose the monthly subscription. To take advantage of this offer follow the link below and key in your email address. You should wait for an email with your username and password for Guitar Tricks. Use this information to logon.  Once you are inside Guitar Tricks select the Upgrade button and choose the Monthly Membership option. In the Coupon Code section on the same page enter the Coupon Code ‘60OFF’ to get the 60% discount on your full access membership for the first month.

{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Aside from the superstrat ESP M-10 shown earlier. The ESP LTD EC-10 is also an affordable guitar but with a different body design derived from the Les Paul. The features of this LP inspired guitar that makes it different is the bevels on the body and belly cut at the back for comfort. Its major resemblance to a Les Paul is the humbuckers pick-ups equip on the guitar. Together with the bridge design for having a stopbar and tom bridge without a whammy bar.
The Dobro All-Electric featured a pickup purchased from the fellow who’d invented it in ’32, Arthur J. Stimson of Seattle, Washington (it was not invented by Dobro’s Vic Smith, as has been reported elsewhere). This was, as far as we know, the first modern electric guitar pickup, with the magnet under the pickup, rather than over the strings, as on Electro/Rickenbacker instruments (or the presumed “transducer” on the ’28 Stromberg-Voisinet). Stimson’s pickup had a large horseshoe pickup in the body with two coils, one for bass and one for treble strings, each with its own bar polepiece. A 1/4″ jack outlet sat on the top down near the standard stamped National trapeze tailpiece, next to a single volume control.
Purists might question why we’ve lumped loopers in with delays but the simple fact is that both pedals repeat an element of what you’ve already played. Both are also great for helping you come up with new ideas that simply wouldn’t be possible otherwise. Basically, loopers take similar technology and allow you to record entire passages of play, then ‘loop’ them back (i.e. repeat them) whilst you play something new over the top. Lay down a basic chord progression, then solo of the top of it. You don’t even need to bother with pesky drummers or singers! We’re joking, obviously. As a tool for practice, they’re unparalleled, but in creative terms they’ve opened the doors to entire new genres of music. Ed Sheeran, KT Tunstall and plenty of other solo singer-songwriters have employed loopers in their acts to great effect.
Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.
Another exotic tonewood is making a name for itself in the guitar industry. It’s similar in appearance and sound performance as Mahogany. It has a distinctive punch for the mid-range tones, but it emphasizes the bright trebles that can be an asset in music when you achieve pitch-perfect intonation. The Martin Road Series DRS1 Guitar sports Sapele beauty perfectly!
For years, Schecter has provided a nice counterpoint to the various Les Paul and Strat look-a-likes on the market (many of which are very good) at an affordable pricepoint. As my local guitar shop owner once said, for the money, they might make the best all around guitar south of $1,000. You can spend more than that, but the point is, they don’t skimp downrange.

The first trick I will show you is very simple: you only need to add a bit of distortion to the signal so that the bass line stands out from the mix without making it too heavy. To achieve that, and as awkward as it seems, guitar pedals seem to be more fitting than bass pedals, at least for recording and with this particular technique. Indeed, "crunchy" guitar distortion pedals are usually pretty "poor" in the low end of the frequency spectrum, which makes it easier to mix the distorted signal with the original one. In the following example I used the famous Ibanez Tube Screamer:
Whether you’re looking for the best acoustic electric guitar for beginners or a more advanced model, there are so many options that it might be tough to make the right call. If you want to learn more about some of the most popular guitars but don’t have the time to do your own research, then you can count on us to help you out. We’ve scoured the market and compared countless acoustic-electric guitars so we can recommend the best. Our top choice is the Epiphone Hummingbird Pro.
{"id": "H99039", "skuOrProductId": "H99039", "categoryId":"site1AAG", "name":"DT520 Destroyer Series Electric Guitar", "pageUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.

Since it was originally introduced in 1975, the Destroyer has become an icon of that era's chapter in rock n' roll history. Over the years it has undergone many incarnations and the perennial classic returns once again. The body and neck of both guitars are made of a tight Mahogany for maximum resonance. The bound rosewood fingerboard is adorned with Jumbo frets. The Destroyer also features Sure Grip III control knobs for no-slip control. It's not called the Destroyer for nothing.", "value":"447.99", "priceMin":"447.99", "priceMax":"699.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"3", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

The earliest boost pedals used a germanium transistor and was often in the form of a treble booster. The most famous treble booster is the Dallas Rangemaster which is rumored to have been used by Eric Clapton on the Bluesbreakers record, often referred to as the Beano record or Beano tone. (This is because Clapton is reading a Beano comic on the record cover). At the time Eric was using a Marshall JTM45 2×12 combo (commonly referred to as the Bluesbreaker because of this recording) and a Les Paul and man does it sound good. Allegedly he was using the Rangemaster to push the front end of the amp into more distortion. This has never been confirmed to my knowledge but is the source of much Internet speculation. But I have played an old Bluesbreaker amp with a Les Paul and it sounded pretty darn close.
Why We Liked It - The Martin DRS2 will take some beating as one of the all-round best electric acoustics you can buy, simply because you’re getting the finish and tonal quality of a much more expensive guitar for a solid price. Whether you’re mainly looking for a traditional acoustic you can occasionally amplify, or you need something professional grade for gigs, this could be it. In terms of recording your guitar, you can mics for guitars or a microphone for the guitar amp. If you're looking for an alternative, check out the Martin Road Series DRS1 Dreadnought.
Unlike the guitars we have mentioned so far, the Taylor BT2 Baby Taylor is a travel guitar. In other words, it's a 3/4 scale size of a standard dreadnought, making it easier to play for a lot of us. The top wood is a solid mahogany piece while the back and sides are made of layered Sapele. The use of laminate wood is one of those friction points which many purists like to point out to. However, the way Taylor builds these guitars, you really won't hear a difference. In this case it's only a visual difference, and a fairly attractive one at that.
The C3M comes with Savarez Cristal Corum high-tension strings, but you can always change them out for something different if you prefer. Aesthetics-wise, the guitar has a matte finish (the “M” in the model name), but it really has no bearing on the way the guitar sounds.All the same, you’ll want to protect your guitar from nicks, cuts and other damage.
Next in line after pitch shift/harmonizer and envelope follower effects are pedals that directly interact with the pickups’ output levels, such as vintage fuzz, treble booster and Octavia/fuzz octave pedals. As with the dynamic filter pedals, placing any other effects that compress the signal in front of these pedals will limit their overall performance.
“Music is ineffable,” says Scott Waara, product manager at Line 6. His company has built a business around providing the widest range of tones possible to guitar players. But even for a firm dedicated to dissecting tone, it’s not easy to reduce things to a simple recipe. “Everybody hears differently,” Waara says, “and the frequency response of everyone’s brain is different, so some things that are cool to some guys are not going to be cool to other guys. You can put it on a scope and see what’s happening on a frequency graph and you’ll see some tendencies and trends and so on.” The trends seen by the Line 6 staff seem to indicate that warmer, fuller tones are more generally accepted and considered “good.”
What style of music do you play? While there are many versatile guitar amps that can be used for many styles of music, if you play a particular style of music a majority of the time, then you should get an amplifier that best suits it. Do you play acoustic or electric? Certain guitar amplifiers are designed specifically for acoustic guitars although it is possible to play an acoustic through any amp. In terms of styles, jazz players typically do not need an overdrive option as clean tones are best suited for that style of music. Blues aficionados will be happiest with a clean channel plus an overdrive channel with plenty of sustain, such as one finds on many vintage Fender models. Shredders will require an amp that will accept distortion pedals without losing signal quality. Do your research regarding which guitar amps are best suited for the type of music you play.
Established over a century ago as a piano and reed organ builder, Yamaha has since expanded into building other musical equipment and even went on to successfully expand into other industries. But in all this success, Yamaha continues to stay true to their musical roots, producing highly rated instruments, amps and other gear. While they are not primarily a guitar amplifier builder, Yamaha's extensive reach and resources give them an almost unfair advantage over the competition, as exemplified by the success of their THR line of desktop guitar amplifiers. This line of portable amps combines Yamaha's penchant for student friendly features and modern studio functions that many guitarists appreciate, ultimately securing Yamaha a special spot on this list.
Amazing guitars, specially the Custom Series full solids. You can choose from variety of tonewoods and soundboard combination and 4 different shapes. Offering almost every player's preference. You can also choose options such as soundport off-the-rack. Great craftsmanship, amazing tone, and superb playabality at an amazing price. Great guitar, and definitely not an OEM brand. They only make their own guitars.
This is an interesting one - by fitting a MIDI pickup to your guitar you can record your performances as a MIDI track as well as live audio. This can then be assigned to any software or hardware MIDI-triggered instrument to double up or even replace the guitar part. Some DAWs now also allow the extraction of audio to MIDI data from a recorded audio part, but the MIDI pickup route is more accurate where electric guitar is concerned.
Yes, most of them are very useful! These days there are hundreds of online tutors offering great guitar lessons. And there’s no need to throw your money at the first offer you see, as a lot of quality instructional and tutorial videos are completely free on platforms such as YouTube. Generally, paid courses tend to be better because they are tested and are well-structured, and – in theory – you should be able to progress faster. But it all depends on your budget and on your will to learn on your own.

Large-diaphragm condenser microphones set to cardioid or omni mode work better for ambient purposes at distances of 2-3' or farther, introducing more room sound and coloration. Ribbon microphones, which are also (usually) dynamic, have become a popular alternative for guitar-cabinet recording in either close or distant miking situations. They combine good, detailed sonic reproduction with the capacity to withstand intense levels of sound pressure (a characteristic of their dynamic brethren, as well).

Shortly thereafter, the American instrumental rock band The Ventures asked their friend, session musician and electronics enthusiast Orville "Red" Rhodes for help recreating the Grady Martin "fuzz" sound.[18] Rhodes offered The Ventures a fuzzbox he had made, which they used to record "2000 Pound Bee" in 1962.[19] The best-known early commercial distortion circuit was the Maestro FZ-1 Fuzz-Tone, manufactured by Gibson, released in 1962.[20]
The 6260 will keep the high-gain crowd happy. The V22 will satisfy anyone looking for a tube combo for rock, blues or country music. The 1960 will meet the needs of players looking for a British-type overdrive, and the 333 will nail those scooped out metal tones you might be looking for. Bugera is definitely worth checking out for players on a budget, or guitarists just looking to build their collection of classic sounds.
EQ (Equalizer) – A frequency-based effect that allows you to boost or cut frequencies along the audio spectrum. Graphic EQ pedals such as the GE-7 and GEB-7 have faders for each frequency band that you can move up or down to boost or cut the frequency. EQ pedals can be used to tackle problem frequencies such as mid-range honk or to give a bass boost or add some high end sparkle. Alternatively you can use EQ to create interesting tones such as emulating a small radio by rolling off the bottom end and boosting the high mids.
The first trick is the most obvious one: to double a crunch or heavily distorted guitar with a clean one. By sub-mixing a clean sound, you will be able to retain some precision, which is no minor detail considering that distortion has the annoying tendency of blurring sound. For this trick to be as transparent as possible, the crunch and clean performances must be as similar as can be. That being said, if you have a hard time getting that perfection, you can always "cheat": be it by editing the clean sound to make it match the original performance or simply doing some reamping with the first take, as discussed previously. In both cases the trick ought to work wonders because the clean take is only meant to be "felt" but not distinctively heard by the listener.
Guitarists love to get loud. I remember when I got my first electric guitar, I took it and my amp out onto my grandmother’s back porch and did my best rendition of The Man Who Sold The World, over and over again — at full blast — for several hours. In suburbia, in the middle of the day, I didn’t receive a lot of complaints. If I tried that today, in my Los Angeles apartment surrounded by grumpy neighbors, I might not be so lucky.
“To extend valve life, turn your amp off after a gig and let it sit for a few minutes before moving it. And vice versa: as soon as you’ve got a power cable to your amp turn the juice on and let it warm up for as long as you can. Tone-wise, you can notice the difference between an amp that’s been turned on for only five minutes and an amp that’s been sitting there [switched on] for 45 minutes.”
An additional note on the methods used; although we gathered rating and review data from guitarists around the world, we only considered brands that can be found at major online music gear retailers located in the United States. This means that fine brands like Maton from Australia (played by Tommy Emmanuel) weren't included - the same goes for some respected European brands. Also, only full sized guitars, or ones very close to it, were included in the data set - had we included smaller parlor guitars then this may have boosted Martin and also Gretsch might have made the list.
Acoustically I own a Martin for the living room. Best sound but I won't let it leave the house. (Taylor people are so defensive, but lets face it Martin owners never have to say "Oh it sounds just like/as good as a Taylor") I own an Ovation, the thing is bullet proof, a little thin on sound but can take it anywhere. If I plug it in, it has amazing electronics and sounds 10X better. I own an Ibenez exotic wood, pretty but a stiff box that just does not resonate, hate it.
Peerless hollowbody guitars are excellent at this price range. Both of these brands manufacture from factories in South Korea. PRS SE is made by World Instruments Co. and they have consistently high standards - all brands made in this factory will be exceptional. Peerless is a company which used to manufacture high end guitars for other brands such as Gretsch and Gibson, and then launched their own brand. They are exceptionally good guitars.
One detail is the rating, honestly there is no right or wrong here really, it's down to personal preferences. A .022uF capacitor will roll off less treble frequencies than a .047uF, so you'd perhaps notice a more prominent drop in treble when rolling a tone pot down which has a .047uF cap wired to it than you would if it was a .022uF. This to me is an important detail to consider when choosing the right cap for you, but if you're still not sure, the general rule is .022uF for humbuckers and perhaps P90s, and a .047uF is used primarily for single coils. This isn't set in stone though, so perhaps consult your pickup manufacturers recommendations first. If you want any help in choosing the right rating for your harness though, I'm very much here to help, so by all means drop me a message!

I have an old Zoom 505 all in one pedal plugged into the clean channel of my Peavy Scorpion 2-12 amp. I’m using the distortion, chorus, reverb, delay, etc. programmed from my pedal. I want to add my Crybaby wah so it’s just a matter of easily just switching the order of both pedals and see what works best. Until I upgrade, it should be simple. Here we go. Thanks.

{ "thumbImageID": "TMB100-Electric-Bass-Guitar-Soda-Blue/J18871000006000", "defaultDisplayName": "Ibanez TMB100 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Flat Walnut", "sku": "sku:site51500000037119", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Flat-Walnut-1500000037119.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Flat-Walnut/J18871000009000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Soda Blue", "sku": "sku:site51418053839849", "price": "159.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Soda-Blue-1418053839849.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Soda-Blue/J18871000006000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "White", "sku": "sku:site51418053839859", "price": "159.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-White-1418053839859.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-White/J18871000008000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51418660057607", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Mint-Green-1418660057607.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Mint-Green/J18871000005000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51418660057427", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Black-1418660057427.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Black/J18871000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ivory", "sku": "sku:site51418660057317", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Ivory-1418660057317.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Ivory/J18871000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tri-Fade Burst", "sku": "sku:site51418660057447", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Tri-Fade-Burst-1418660057447.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Tri-Fade-Burst/J18871000004000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Wife wants to play guitar again after a long hiatus. My full sized Takamine with fat strings is too big and heavy for her. Got her this 3/4 Yamaha and I fell in love with it. I may have to get another one for her because I've been hogging it. It has a great voice for a 3/4. The action is nice, the built in tuner is a real treat. Never had one before but it is unbelievably convenient. I don't plug it in often but I had to check out that sound too. The electronics sound decent. Can't crank it up too loud or it starts to feedback, but I'm actually sitting right on top of my small but punchy VOX amp so I can't really say how it would work for playing out. The reviews convinced me to buy this one. The best review only had one major complaint; the tuning pegs. I agree they could be better, but I don't think they are awful. I have to tweak the tuning just a little once or twice a day before I play, but it isn't like it goes out of tune when I'm playing, even when I'm beating on it hard. I think it is well worth the price and was surprised by the volume it produces. Much better than expected. If you don't find the tuning pegs worthy, I think the instrument is good enough to spend money on for an upgrade, but I don't plan to. It is solid, light weight, comfortable, nice sounding, well designed, feature rich and handy. I'm keeping it in the corner by the bed and I pick it up every chance I get. I haven't played guitar much the past few years so having a guitar at my fingertips all the time is helping me get my callouses back quickly. No matter what you play, if you lose your callouses, rebuilding them is always painful for a few weeks, but this instrument is pretty easy to play. I've gone through the process several times over the years with my Takamine. This is far less painful. Perhaps that means it will take longer, but at least I can still use my fingers to type long reviews in the meantime. No avoiding the pain regardless of what you play, but there is pain, and there is agony. This guitar hits a sweet spot somewhere in between. It's just right for young or old, big or small. (FWIW, I heard an interview with Clapton where he confessed he doesn't play much when he's not working and when he has to prepare for a tour, even he has to go through the callous building process). Well, I'm way off topic now. Again, great little guitar. Go for it. – offers PCB projects to build guitar and bass effects, and synth modules. All PCBs are professionally manufactured, and include soldermask, a silkscreened component legend, and plated through holes and pads. They are designed to be easy to build, provide simple and clean wiring, to work well with your other pedals, modules, and instruments, and most of all to sound great and provide sounds and features not available in commercial designs. Each PCB comes with a PDF document with wiring diagram, schematic, build notes, and large modding sections with details on how to perform a variety of mods to tailor the design to your needs/taste.
Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.
In many ways the Fender Stratocaster is the antithesis of the Gibson Les Paul style guitar. The first thing I notice when I sit down to play a Strat style guitar is the fantastic body shape - it's just a perfect fit. The Strat typically has a scale length of 251/2 inches which is considerably more spaced out than the Gibson. While a Gibson has the warm humbucker tone, a vintage Strat tone is thin and sharp, almost cutting. To achieve this there are three single coil pick-ups with staggered coils which equalise the prominence of all the strings. The humbuckers Gibson use are basically two single coils wired parallel to cancel some of the background hum that the Strats suffer from. In doing this however they loose some of the higher frequencies which give the Strat their sharp, jangling tone. The massive Fender scratch plates were originally used to protect their pick-ups from picking up too much background buzz and they've become one of the Stratocaster's most distinctive features. The Strat also has the tremolo bar which the Gibsons lack. For the uninitiated the name 'tremolo' is a bit of a misnomer as the 'whammy' bar actually allows you to pitch bend by tilting the bridge back and stretching the strings while the 'tremolo' effect usually refers to changes in volume.

If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.
{ "thumbImageID": "Omen-Extreme-6-FR-Electric-Guitar-See-Thru-Black/520222000011000", "defaultDisplayName": "Schecter Guitar Research Omen Extreme-6 FR Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "See-Thru Black", "sku": "sku:site51274115040642", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Omen-Extreme-6-FR-Electric-Guitar-See-Thru-Black-1274115040642.gc", "skuImageId": "Omen-Extreme-6-FR-Electric-Guitar-See-Thru-Black/520222000011000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51289600495695", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Omen-Extreme-6-FR-Electric-Guitar-Vintage-Sunburst-1289600495695.gc", "skuImageId": "Omen-Extreme-6-FR-Electric-Guitar-Vintage-Sunburst/520222000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black Cherry", "sku": "sku:site51274115040516", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Omen-Extreme-6-FR-Electric-Guitar-Black-Cherry-1274115040516.gc", "skuImageId": "Omen-Extreme-6-FR-Electric-Guitar-Black-Cherry/520222000127000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Martin’s second major innovation, and arguably the more important, of the period 1915-1930 was the dreadnought guitar.[6] Originally devised in 1916 as a collaboration between Martin and a prominent retailer, the Oliver Ditson Co., the dreadnought body style was larger and deeper than most guitars. In 1906, the Royal Navy launched a battleship that was considerably larger than any before it. From the idea that a ship that big had nothing to fear (nought to dread), it was christened HMS Dreadnought. Martin borrowed this name for their new, large guitar. The greater volume and louder bass produced by this expansion in size was intended to make the guitar more useful as anaccompaniment instrument for singers working with the limited sound equipment of the day. Initial models produced for Ditson were fan-braced, and the instruments were poorly received[citation needed].
• How wear alters playability: Fret wear – grooves worn in the frets from pressing down on the strings, depressions created by bending, lowered overall fret height from usage – can all cause buzzing noises to occur at points where frets are located along the neck. Luckily, these problems can typically be addressed by having the frets leveled and dressed several times before a fret replacement job is necessary, since fret replacements are costly.
Joe Perry is the American distillation of the good-old Keith Richards/Jimmy Page recipe for sideman/lead guitarist cool. He’s got the look and the licks, and he’s maintained both over the course of three or four decades—despite all odds. Jagger and Richards are the Glimmer Twins, but Perry and Aerosmith singer Steven Tyler went down in history as the Toxic Twins.