Peavey - Hartley Peavey started Peavey electronics in 1965, it went on to one of the largest musical instrument and audio equipment manufacturer in the world. They offer a multitude of guitars, amps and related gear, and the price point they use are comparatively very reasonable. One of their latest guitars, the Peavey AT-200, has the guitar world talking about its innovative auto-tune feature.

The next step up from a Fender Squier Bullet can be a Fender Squier Standard Strat, but if you can afford 50 dollars more you are the owner of a Fender Deluxe Stratocaster which is a really good guitar for beginners, intermediate and advanced guitar players who don’t want to spend a fortune but do want a good quality guitar which is decent enough to upgrade later on with better pickups and hardware to make it top notch. If you don’t want to spend a 1000 dollars on a real american Fender Stratocaster then this is the best alternative.

The slide part on that track was quite difficult to simulate, but again, the guy I have playing in my band, that I've been playing with for a while, can do it, and he and my son are the only two guys I know that play it right. Recently, I had Ronnie Wood playing with me, and he did a good job with it. I think if you have your head on it, it can be done.
Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.
The standard tuning, without the top E string attached. Alternative variants are easy from this tuning, but because several chords inherently omit the lowest string, it may leave some chords relatively thin or incomplete with the top string missing (the D chord, for instance, must be fretted 5-4-3-2-3 to include F#, the tone a major third above D).
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
A sub-brand under the same umbrella as German brand, Behringer, Bugera has been flying under the radar for some time – though they make some surprisingly clever amplifiers. The BC15 is one such amp. Styled like its predecessors from the ’50s and ’60s, this vintage-inspired amp benefits from a single 12AX7 vacuum tube giving it a lot more warmth and character than for which you’ll pay. And don’t let its size fool you, either – while it only has a single 8″ speaker, it offers up a whopping 30 watts, making for a surprisingly loud little machine. For the price, it’s seriously difficult to do better than this.

Generally, a band sounds the best to the audience when you have an attentive, knowledgeable sound person who is paid well by the band or venue. He also needs the right tools to balance the sound for the room. If all of the instruments onstage are blasting at full volume, the poor PA can’t keep up- and the people in the first few rows have their heads torn off by whatever instrument amplifier they are unlucky enough to be standing in front of. This results in an unbalanced mix that the sound person can’t fix. It might sound awesome onstage, but you want the audience to have a great experience too, right? With monitors, side fills, several amps/cabs, and a fort full of cymbals onstage, things get loud quickly, and everything competes for the same sonic space. It is easy for band members to get into ‘volume wars’ while the sound dude/dudette takes everyone out of the mix but the vocals right before they throw up their hands and shake their heads. The audience might not know what sonic problems are occurring, but they definitely will hear it. An audience member describing a gig like this to a friend might say, “I saw this band, but they sounded terrible.” No one wants that kind of review. We spend a lot of money on guitars, pedals, amps, and microphones. But many  musicians at the gig just set everything up and hope for the best. 
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
From the 1940s through 1990s, the company also manufactured various electric/electronic keyboards. Especially in the 1960s and 1990s, they manufactured a range of innovative and popular electromechanical keyboard instruments; the Cembalet, Pianet, Basset, Guitaret, and Clavinet. In the 1980s, several Casio synths were sold under the Hohner brand - for example, the Casio HT-3000/Hohner KS61midi and the VZ-1/HS-2).
Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (coffeehouses, small pubs, etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.
When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
The world of audio effects is one that can be confusing even for experienced engineers. Especially in modern computer-based recording systems, there's a bewildering array of options, and to add to the confusion, some effects are widely referred to by more than one name. In this article, I'll take you through the most common effects, explaining how they work and where you might want to use them in your music. Meanwhile, SOS 's team of writers has contributed a wealth of expert tips and tricks, which you can find in the boxes scattered through this article.
Besides its classic vibe, the best part about this guitar may be its Broad’Tron pickups. These were designed specifically for the Streamliner, and are known for their throaty midrange, booming lows and sparkly highs. They’re also louder than Gretsch’s other popular pups, the Filter’Tron, so push them hard and they’ll snarl and scream. Dial back the volume knob, however, and you’ll encounter the warmth and rounded tone for which Gretsch hollow-bodies are known.
Like trapeze tailpieces, top mounted vibrato bridges transfer the string tension to a guitar’s side, offering more natural string resonance. Embedded units like the Vibrolas found on Gibson Flying Vs transmit the tension to the guitar’s body. Through-body units do neither, employing strings to absorb the string tension. Another system, the TransTrem, developed by Steinberger in the ’80s, has locking positions that allows players to transpose their tuning to other keys.
I have been playing for two years. I use to play (and still have) a fender squier. Today I bought a Lyle on impuls. I wasn't planning on buying one, i just walked in and it looked so beautiful. I have a feeling it is about 10 years old or so, but the sales man didn't know much other than it was a Lyle and it had new tunning pegs on it. I got it for 150$ and i would REALLY love to know more about it. Thanks.
For the guitarist who's frequently on the road or often plays out, the pedalboard is an indispensable aid. Many pedalboards include custom-fitted travel cases or gig bags. With your effects already mounted on the pedalboard, performance setups are fast: just unpack the already-configured board, plug in your guitar and amplifier, and you're ready to play.
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the transducers are wired directly to their respective RCA jacks as opposed to current production tanks where transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond, Accutronics and Gibbs tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Later, around 1963, rebadged Guyatone and Teisco guitars appeared, both in the U.S. and a few in the U.K., also as Futuramas. That was the beginning of several years of Guyatone-made Kents. The Teiscos seemed to be part of the 1963-64 freshman-class only. After starting with an initial group of both Guyatone and Teisco guitars, the importer seemed to settle on Guyatone as a main supplier.
As previously stated, a dominant seventh is a four-note chord combining a major chord and a minor seventh. For example, the C7 dominant seventh chord adds B♭ to the C-major chord (C,E,G). The naive chord (C,E,G,B♭) spans six frets from fret 3 to fret 8;[49] such seventh chords "contain some pretty serious stretches in the left hand".[46] An illustration shows a naive C7 chord, which would be extremely difficult to play,[49] besides the open-position C7 chord that is conventional in standard tuning.[49][50] The standard-tuning implementation of a C7 chord is a second-inversion C7 drop 2 chord, in which the second-highest note in a second inversion of the C7 chord is lowered by an octave.[49][51][52] Drop-two chords are used for sevenths chords besides the major-minor seventh with dominant function,[53] which are discussed in the section on intermediate chords, below. Drop-two chords are used particularly in jazz guitar.[54] Drop-two second-inversions are examples of openly voiced chords, which are typical of standard tuning and other popular guitar-tunings.[55]
The best electric guitar isn’t one that just sounds good (however you may define good as) — it’s how it feels in your hands. We remember when we could barely start forming memories, going to our dad’s shows and him using his telecaster on stage. He had been playing since he was 5 years old (which we actually used his opinion for in this guide as well) and continues to play today 50 years later. As we grew up and learned guitar ourselves, it was more about what was comfortable and felt as natural as possible. Paired up with the sound and feel, there are a few more factors to take into consideration when you’re looking for the best electric guitar.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark
In the 1970s, 1980s and 1990s, a growing number of composers (many of them composer-performers who had grown up playing the instrument in rock bands) began writing contemporary classical music for the electric guitar. These include Frank Zappa, Shawn Lane, Steven Mackey, Nick Didkovsky, Scott Johnson, Lois V Vierk, Tim Brady, Tristan Murail, Brian May and Randall Woolf.
If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.
Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.

A modern popular rock artist known for use of the Super Beatle is Tom Petty and the Heartbreakers, although in the April 2008 issue of Premier Guitar, lead guitarist Mike Campbell revealed that the Super Beatle backline was, on their thirtieth anniversary tour at least, primarily used only as a stage prop, though Petty used his "on a couple of songs." In the group's early days, the Vox equipment was chosen because it was relatively inexpensive in 1976, yet had a handsome appearance. A photograph included in the article showed Campbell's guitar sound was coming from other amplifiers hidden behind the large Super Beatles, which Campbell stated were "a tweed Fender Deluxe and a blackface Fender Princeton together behind the Super Beatle, and an isolated Vox AC30 that I have backstage in a box."
The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws.

While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.

After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
The ’55 hollowbody line consisted of no less than eleven guitars. Models included the EP-4, EP-5, EP-6, EP-7, EP-11, EP-12, EP-13, EP-14, EP-15, EP-16, and EP-23. Clearly, in these instances, the numerical designation indicates appointments, not the number of pickups. Some of these are likely to be thin-bodied archtops with no cutaways, some thinlines with a single cut, and some full-bodied archtops with a single cutaway, with either one or two pickups, and probably no vibratos.
Not something you have to think about with an acoustic guitar, the electrics in an electro acoustic are quite important, though not as critical as with an electric guitar. You’ll want to make sure that you’re getting a good quality pickup and preamp, and then the next thing to consider will be features. Preamps often come with EQ adjustment to alter the tone slightly, and some will even come with certain effects that you can add on. Builtin tuners are a common addition too which mean you don’t need a separate tuning box.
The Super Strat, though modeled after the Stratocaster, is a very different guitar. Basically, the only similarity this guitar really has to its namesake is the body style. The pickups generally used in Super Strats are of a higher output (we’ll get into this in more depth, but for now just remember higher-output=more distortion), which makes them more suited for metal and hard rock. Super Strats also commonly have Floyd Rose tremolos, which allow for a great range of movement than a typical Fender Stratocaster Tremolo while still having a greater tuning integrity (you can use it more without the guitar going out of tune).

These two are definitely the most similar sounding of the bunch and this poses a slight problem. While Steel String has more resonance in the low-end and covers fingerpicking, Songwriter is a little warmer/duller sounding but has twice the samples and round robins.  For me, this makes it hard to pick between the two, and while the tones are different, perhaps not quite enough.
Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.

This is breathtaking and very inspiring pop-rock music with great energy and bright motivational atmosphere. Main instruments are electric guitar, digital synth, bass, strings, piano and drums. This exciting and uplifting track could be a perfect choice as background music for any video production, multimedia projects, Youtube channels, narrations or life stories, films and other projects.

I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"hohner","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Besides his restoration of vintage guitars, one of the most important contributions Paul has made to the guitar world is passing the torch to a new generation of guitar masters by offering Luthier classes that teaches how to build your own electric guitar at his shop. People from all walks of life have attended his seminars, including Mark Colombo, a former offensive tackle of the Dallas Cowboys. Paul is not only sharing his love of building great guitars but also teaching the science of how the magic works. "I have what's known as the 'no-fail policy,'" he says and laughs. "If you can't do the work, I'll do it for you."
The Hal Leonard Bagpipe Method is designed for anyone just learning to play the Great Highland bagpipes. This comprehensive and easy-to-use beginner's guide serves as an introduction to the bagpipe chanter. The accompanying DVD includes video lessons with demonstrations of all the examples in the book! Lessons include: the practice chanter, the Great Highland Bagpipe scale, bagpipe notation, proper technique, grace-noting, embellishments, playing and practice tips, traditional tunes, buying a bagpipe, and much more!.
Hi everyone! I have a quick question regarding string action. I have just gotten my 2003 Standard set up a few months ago, but I am having trouble with how low the action is; strings slip off of my fingers during bending now. If I just turn the screws on the Tune-O-Matic bridge to heighten the action a little bit, without touching or adjusting the truss rod, individual saddles, or tailpiece, will that screw up my intonation?
Amazing guitars, specially the Custom Series full solids. You can choose from variety of tonewoods and soundboard combination and 4 different shapes. Offering almost every player's preference. You can also choose options such as soundport off-the-rack. Great craftsmanship, amazing tone, and superb playabality at an amazing price. Great guitar, and definitely not an OEM brand. They only make their own guitars.
Now, imagine having that same signal but with your guitar’s volume on its half way setting. That same degraded signal comes out even worse as it only had half of the voltage to work with from the get-go. In order to minimize the amount of signal loss, it is always suggested that the guitar’s volume is kept at its max setting and either manually adjust the output level from the amp or better yet, from a dedicated volume pedal, as is the choice for most professional musicians. A volume pedal in an effects chain will control the output volume of everything that is placed before it, so it’s pretty much almost always a good idea to place it at the end of the chain if it’s going to be your main form of overall volume control.
This is an American Gibson Les Paul electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above (except it does not include the slaps and slides preset) and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jazz and blues but can easily be used for rock if used with more distortion. It has a very full rounded sound with good sustain and when played harder has a bite to the attack. This guitar is a classic that has been used in alot of types of music.
The first subject I concentrated on is (you guessed it) recording electric guitars. What became immediately apparent was that there was a huge range of different techniques being used, and also that there were strong differences of opinion between different professionals, which left the question 'who do I believe?' The only way I could answer that question was to put the different techniques into practice in the studio, and then A/B them to sort the sheep from the goats.
A batch of 20 to 30 guitars featuring Ripley’s electronics was assembled using Japanese bodies and necks. The one in our possession is a GS2-R (#28949) with a standard (no German carve) Strat-style body, bolt-on multilaminate neck made up of red-dyed 1/16″ maple strips glued end-to-end, pointy-droopy carved bi-level six-in-line headstock, Gotoh tuners, black hardware, 24-fret ebanol fingerboard, faux-pearl pennant inlays and locking Ovation Floyd-Rose-licensed vibrato system. Two plastic-covered humbucking pickups (no exposed poles) featured individual output controls for each string, with six individual three-way mini-toggles for selecting pickups combined with six fader pots directing string/pickup output to a stereo jack.
Gold Plated strings are really just 80/20 Bronze & Zinc wound nylon strings.  They are also used to produce the bass wound strings of a set of classical strings.  They maintain their place in the market due to having a much brighter tone than silver plated strings and are used by many professionals due to their capability to project louder and sharper.
Ask yourself this question right at the beginning. Before buying a guitar you have to make sure of the kind of style you are comfortable in- be it the jazz and blues or be it country, soul or pop. Only once you are sure of the kind of style you are in for, you should move forward to buying your new guitar. Make the wrong choice, and you will have to regret for it later on.
Electronics, guitars and otherwise are as standardized as this book would have you believe. My problem was the 5-position switch. The one I took off the guitar was not the same as the replacement and the descriptions in the book were not sufficient to help me understand how to hook up the different switch. Fortunately, the rest of the circuit descriptions were right on and I got the guitar running (I had to use the old switch). If they author had described the signal flow through the switch I might have been able to figure it out. But the book is an invaluable resource for the DIY'er. I'm sure I'll be using it a lot more.
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.
Package arrived in a timely manner and in good shape. Guitar is alright, built to look like a high-end model but closer inspection proves otherwise. I was fine with that but then had to remove the rear cover of the amp to reconnect a power wire that had become disconnected during shipping just to get power to the amp. After that I still had no sound through the amplifier. I checked the amp and cable with another guitar and all worked fine. That lead me to replace the guitar battery that came with the unit with a brand new one and the problem still persisted. After destringing the instrument and checking the interior connections I am convinced that the issue is in the pickup under the bridge or in the onboard electronics. Hopefully the replacement will work better but buyers should be cautious when ordering this product. The guitar really is beautiful for the price but certain quality control issues leave me wondering, especially once the Amazon product support expires on it.
Be careful. Don't be rash. With the quality of Gibson's 2016 guitars, you should never have too many problems but... if in doubt with an older guitar, take it to a guitar repair pro. You won't need to do it often at all. And it's best to book-in your guitar with an explanation of what you think is wrong. Basic premise: T.L.C. for your guitar, and you'll feel the love back. Oh, and keep your guitar clean!
Although originally founded in California in 1979 as a company that made replacement parts for guitars, Schecter now produce many models of their own – both mass-produced and custom shop guitars. Like the others on this list, Schecter provide guitars for some big names and have a range of signature models including the guitars of Dan Donegan, Keith Merrow, and Jeff Loomis.
Plays like a Fender, sounds like a Gibson! Absolutely amazing and incredibly versatile guitar. The pickups are really impressive, the playability is second to none. I sold my first G&L, I'll never live down the regret, so I bought another one. I haven't played a PRS yet, but I own a Fender Strat and a Gibson Les Paul, Schecter and an ESP Eclipse, but it's my that G&L gets the most play time!
Ovation guitars have a history of innovative design, reflecting its founder’s engineering training and development of Kaman helicopters. Ovation guitars have composite synthetic bowls; earlier acoustic guitars have had wooden sides abutting a flat back since the 1700s. Kaman diagnosed structural weaknesses in the orthogonal joining of the sides, and felt that a composite material could be used for a smooth designed body. Ovation’s parabolic bowls dramatically reduced feed-back, allowing greater amplification of acoustic guitars. Improved synthetics used techniques from helicopter engineering to control vibrations in the bowl. Ovation has developed a thin neck, with the feel of an electric-guitar’s neck, but with additional strength from layers of mahogany and maple reinforced by a steel rod in an aluminum channel.[1] The composite materials and thin necks reduced the weight of Ovations.
So here we are at the end of our journey (well, probably not yours). Maybe you have found the best guitar practice amplifier from this list and cannot wait to buy it or maybe you still want to have your options. BUT my point is that starting with an amplifier for practice is a great idea. Not only will the amp serve a very particular purpose it was made for but you will also save quite a lot of money. For instance, most amplifiers under $100 are great for practice so you can check out our list of the best cheap amplifiers for beginners. And while I know a lot of people don’t like the idea of “cheap” being in the same sentence as their instrument or equipment, the thing is cheaper does not necessarily means bad. Is a $100 amp going to win over an amplifier in the best amplifiers $1000 list? Probably not, but as I already mention the best “objective” amplifier (or what brands and people deem to be the best at the moment) is not always a good option for everyone. That is especially a case with someone who is just starting off their journey into the world of music, amps, guitars and everything of that sort.
The Marshall CODE412 - 4x12 Speaker Cabinet is a powerful monster designed as a companion to your CODE 100 head. A classic angled cabinet that is packed with four 12” speakers, each with a 30-watt output. This extremely affordable 4x12 amplifier cab is perfect for those in need of a high-quality option for their set up, whether you have a CODE or not. A single input makes it easy to plug and play and the 24kg weight ensures you won’t break your back carrying it to practice. It’s also Marshall’s most affordable friendly speaker cabinet, making it a great choice for those on a budget.
guitar brands german guitar brands best korean guitars korean guitar factory korean guitar manufacturers korean guitar to ukulele manufacturers south korean guitars korean guitars acoustic all electric guitar brands good quality guitar brands acoustic bass guitar brands electric bass guitar brands quality acoustic guitar brands acoustic electric guitar brands good guitar brands More...

The signal from your pickups or pickup selector gets routed to two tone pots. The 500k pot and .022 µF capacitor provide a conventional treble-cut control. Meanwhile, the 1M pot and smaller .0022 µF cap filter out lows. (Pay careful attention to the zeros and decimal points in those cap values!) The treble cut creates its effect in the usual way: by diverting signal to ground. But the bass cut doesn’t go to ground at all—the low-filtering cap is inline with your signal. Its output goes to the volume pot (250k in the original). Clever!
Guitar strap: If you intend to stand up while playing on guitar during live shows (and most people do), then you need to practice in the same position like when you’re playing live. Your muscles and hands are in a completely different position when you’re sitting down and when you’re standing, and that’s why you MUST get a strap right from the start and practice standing up, as well as sitting down. Price: $10 – $15 should do the trick.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
Volume pedals are volume potientiometers set into a rocking foot treadle, so that the volume of the bass guitar can be changed by the foot. Compression pedals affect the dynamics (volume levels) of a bass signal by subtly increasing the volume of quiet notes and reducing the volume of loud notes, which smooths out or "compresses" the overall sound. Limiters, which are similar to compressors, prevent the upper volume levels (peaks) of notes from getting too loud, which can damage speakers. Noise gates remove hums and hisses that occur with distortion pedals, vintage pedals, and some electric basses.

But the question remains, was that environment good for the artists or for the equipment? Think of it this way: experienced chefs know very well the value of a seasoned pan or grill. Flip on any show from the Food Network and you’ll see cooks bragging about their 30-year-old griddle and how it imparts an amazing flavor to their corned beef hash. Preparing food leaves behind actual physical substances, unlike immaterial sound waves, so that comparison doesn’t work exactly. But the dirt and dust and grime could certainly effect the equipment. In a similar way, we have to ask ourselves, was that dirty studio, then, a source of inspiration or were the dirty, beer-smelling microphones actually improving the music? Regardless, the studio imbued the recording with an undeniable quality. Many guitar nuts can identify a particular instrument while listening to a song. Recording experts can do the same thing with studios.

{ "thumbImageID": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "defaultDisplayName": "Schecter Guitar Research Stiletto Extreme-4 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51274115040562", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-Black-Cherry-1274115040562.gc", "skuImageId": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black", "sku": "sku:site51274115040814", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-See-Thru-Black-1274115040814.gc", "skuImageId": "Stiletto-Extreme-4-Bass-See-Thru-Black/528006000011000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Ultimately, his thesis is shared by every single person interviewed for this article. It simply does not appear that there’s any way to objectively measure what is “good” guitar tone. A major reason for that is the infinitely varied human element of the musician performing and the audience listening. The impossibility of proving anything doesn’t, however, change the fact that so many guitarists revere those early tones. Some argue that’s because the early days were just better. Others point out that we’re simply intransigent.
: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.
Acoustically I own a Martin for the living room. Best sound but I won't let it leave the house. (Taylor people are so defensive, but lets face it Martin owners never have to say "Oh it sounds just like/as good as a Taylor") I own an Ovation, the thing is bullet proof, a little thin on sound but can take it anywhere. If I plug it in, it has amazing electronics and sounds 10X better. I own an Ibenez exotic wood, pretty but a stiff box that just does not resonate, hate it.

Most, if not all of us have at least given some thought to learning to play the guitar. It is, after all, an instrument which takes the leading role in virtually every genre of popular music. No matter what type of music you aspire to play, there is almost certainly an important part there for you as a would-be guitar player. Of course, learning to play begins with actually owning a guitar. 
Prince at #10 just shows me that whoever made this list hasn't seen him play that often. And really, KR doesn't even need to be on the top 10. JH is way overrated, yes on the list, but NOT #1. But anyways, cool to see Prince even on the list. Those stupid people writing those comments are probably the ones that say "Prince plays guitar?" They are so living in a box!
Hey Omer, I'm not really doing much to the nut here other than widening the slots, so I don't need to measure any heights, etc. For that reason it doesn't matter when I do it. However, if you were to do a proper nut job, then yes, you should probably do that after setting up the other stuff (if you suspect you're having any nut issues, then just put a capo on the first fret and set everything else up first). But if you have no reason to suspect a bad nut, I'd advise you to just leave it alone.
Gibson is easily one of the most identifiable guitar brands in the world today, and even with the premium price tags of their instruments, many continue to look up to them as their dream instruments. Thankfully, the company has toned down the price a bit on some of their guitars, one of which is the J-15, which enters this list with its good balance of workhorse ready features, premium prestige and reasonable price tag.
Description: 1966-1967 Model. Body: Alder - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Vibrato - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Single Coil - Pickup Configuration: S-S - Guitar Features: Pickguard - String Instrument Finish: Blonde, Black, Sunburst - Guitar Type: Electric
I have many Behringer pedals.Used them gigging.Have had many people ( lots of musicians ) asking me what I am using to get my tone and effects .They are all surprised when I tell them Behringer pedals.And almost all say the same thing."aren't they made of plastic"? Yes they are made of plastic.But being someone who has worked in the plastics industr.for 25 + years I know Plastic can be very strong .I have done hundreds of gigs with these pedals and never had a problem.You would really have to jump ontop of these hard to damage them.And if you did that with the non plastic pedals I am sure you would also have a problem .That said.I have 5 fx600 pedals because I found a site selling them for $14.A super bargin for so much effect.As far as battery power nowadays batteries cost more than pedals so anyone ... full review

5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.

What made him truly special was that, unlike other guitarists of his time who stuck to one style of playing, Jimi combined styles and used strumming alongside licks and other additions to create a fuller and more organic sound. Amazingly, he also used his thumb to do do a moving baseline whilst he was playing chords – he wanted to do what no other guitarists were doing, or were able to do and he succeeded. The way he dressed his chords with so many different sounds and rhythms just shows how naturally talented a guitarist Jimi Hendrix was. His guitar was like an extension of his body, a part of his left hand that had no boundaries.

The Science of Electric Guitars and Guitar Electronics considers the electric guitar and related accessories from a scientific point of view. The majority of books about electric guitars try to avoid using mathematics when describing the scientific phenomena related to the electric guitar. However, mathematics is an invaluable tool in the design processes of all areas of technology, even when designing musical instruments and audio electronics. This book presents simple mathematical methods for modelling the electric guitar as a signal source for electric circuits such as effect pedals and amplifiers. In addition to modelling the electronics inside the electric guitar, the principles of operation of some vintage guitar effects and amplifier circuits are explained and analysed using systematic methods of circuit analysis. The book is intended for everyone who is interested in the design and analysis of basic analogue electronics used in the electric guitar and guitar-related accessories. The presented topics cover the whole signal chain from the guitar strings to the loudspeaker. Therefore, a solid foundation is established for creating own designs in guitar electronics using basic components of analogue electronics.
The more solid wood there is, the better the overall resonance, sustain and tone of the acoustic guitar. Solid wood, specially those used on the tops of acoustics, also resonate better as it ages. The downside to solid wood is mainly its more premium cost, and not to mention it uses more wood resources than laminate wood. Solid wood is also more prone to damage, so they require extra care especially from changing weather and humidity. Laminate woods are more affordable, and they are also more sturdy and resistant to damage. On the flip side, they will lack the resonance and sustain of solid wood, but this can be a good thing if you're looking for vintage mid-range focused tone.
The semi-hollow guitar is based on having a “tone block” that runs down the center of the body of the instrument.  This reduces feedback issues while still maintaining the woody tone of the true hollow body instruments that are widely used in Jazz.  This allowed the pickups to be mounted to a solid block, while the outer portions of the instrument are hollow, which are often adorned with “f-holes” much like instruments of the Violin family.  This type of build provides the resonance and tone of fully hollow instruments, while providing a resistance to feedback that allows the guitar and amplifiers to be used at a higher volume.
Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping Gibson 2017 Les Paul Studio Worn T Electric Guitar (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping Epiphone Les Paul Standard Plustop PRO Electric Guitar   New from$599.00In Stockor 12 payments of $49.92 FREE 2-DAY SHIPPING Gibson 2018 Les Paul Tribute Electric Guitar (with Gig Bag)   New from$1,149.00In Stockor 12 payments of $95.75 FREE 2-DAY SHIPPING See All Electric Guitars: 6-String
If ever there were a forensic investigation to identify the true biological father of punk rock guitar, all DNA evidence would point clearly to Johnny Ramone. The guitar style that people most associate with punk—briskly downpicked barre chords executed with blinding precision at breakneck tempos and marshaled in service of concise catchy song structures—is the invention, progeny and proud legacy of the man born John Cummings on Long Island, New York.
225 Parsons St, Kalamazoo, MI, 49007 1917–1984 Also located next to railroad tracks, this facility had major expansions in 1945, 1950, and 1960.[83] Various brands were produced there, including Gibson, Epiphone, (1957–1970)[84][85] and Kalamazoo. During the depression of the 1930s, children's toys were produced there, and during WW2 it produced materials to support the war effort in addition to producing guitars.[86] Between 1974 and 1984 Gibson moved its manufacturing out of this facility to Tennessee. Most of this move happened in 1974, leaving only acoustic and some semi-acoustic production for this plant.[87] In 1985, Heritage Guitars began production, renting part of this facility.[88]
During the 1960s, many musicians[who?] preferred Martin guitars built beforeWorld War II to more recent guitars of the same model. The pre-War guitars were believed[citation needed] to have internal bracing carved more skillfully than later instruments, producing better resonance, and tops made from Adirondack red spruce rather than Sitka spruce. Additionally, 1970s Martin dreadnoughts suffered from poor intonation in the higher registers[citation needed]. Some luthiers and repairmen[who?] attribute this to a gradual trend of misplacing the bridge on these guitars: the same jigs for bridge placement were used throughout the history of each model’s production. As the amount of production increased from the Martin factory, the jigs eroded, resulting in inaccurate bridge placement[citation needed]. This was eventually identified and corrected.
Drummers have their cowbells and double bass pedals, vocalists have their harmonisers and auto tune. We guitarists, however, are the luckiest: we get effects pedals. Ranging from subtle slap-back echoes to wild and crazy ring modulators; from simple boost pedals to drive your amp a little harder to insane distortion stomp boxes, we can have it all.
The volume pedal is about as simple as a pedal can get. It is basically an external volume knob that you work with your foot. They are an excellent way to control the volume of your rig and can be placed at different places in your guitar chain. When placed first for example it can be great for volume swells (as we will see), reducing your amp gain by acting like your guitar’s volume knob. If placed after your gain section it will bring down your overall volume without reducing changing your tone or gain. You can really experiment with the placement of a volume pedal to see what matches your needs.
Ovation’s first solidbody bass guitars were the 1261 Magnum I and 1262 Magnum II, introduced in 1977, as well. While not as exotic as the Breadwinner/Deacon, the mahogany Magnums had an elongated offset double cutaway design that basically had nothing to do with Fender. Surprised? The upper horn was a bit more extended than a Breadwinner and the upper edge had a slight waist. The lower bout cutout was not as dramatic as the guitar equivalent. Both basses had bolt-on mahogany necks reinforced by three strips of carbon graphite to eliminate warping, a wide strip in the center of the back and two more underneath the fingerboard. Fingerboards were unbound ebony with 20 frets and dot inlays. Both basses had a cast metal housing with two pickups, a small split double-coil unit at the bridge and a large square four-coil unit at the neck, this latter with little screw-adjusted trim pots for micro adjusting volume. The bridge/tailpiece was a heavy-duty plastic housing with heavy adjustable saddles. In front of the bridge was a lever-triggered mute. The primary difference between the I and II was in the electronics. The Magnum I had a three-way select with two volume and two tone controls. It also had two jacks allowing either mono or stereo output. The Magnum II had the three-way plus a master volume and an active three-band graphic equalizer, mono output only.
There were few things more powerful than Stevie Ray Vaughan with a guitar in his hands. Though he was deeply entrenched in the blues idiom, he took it to an entirely new and original level. Heavily influenced by Jimi Hendrix, his triple string bends and lightning fast double stops were things of absolute beauty. While every one of his songs is an electric blues guitar masterclass, perhaps his most impressive performance is in the song “Texas Flood.”

Oh man.......... back to that Firebird 12. It is luscious. I have several tracks from 1973 where I used metal finger picks when tracking that thing and playing high up on the neck with a bit of compression.... heaven!!! I then did some standard chaka chaka rhythm parts with the 12 through a Marshall 50 watt.... heaven x 100. The guitar is SO comfortable to play, sits in ANY mix perfectly and dominates the "oooohhhh" factor with its sound. Please please please sell it to me!!!!!!
If the gap is perfect, congratulations – you may now move on to step 2. If the gap is too large, then you need to tighten the truss rod a little (similarly, if the gap is too small, you need to loosen the truss rod). Locate the adjustable end of the truss rod. On every Les Paul style guitar I have seen, the adjustable end of the truss rod is located under the truss rod cover, located on the peg head. To remove this, simply unscrew the two (or three) screws and lift/slide the cover off.
The guitar's history mirrors the cultural values, preoccupations, and norms in the United States over time. So, too, does the guitar's design, especially since the development of solid-body guitar construction by the 1950s. Because the sound produced by solid-body electrics does not depend on their shape, makers could experiment with a wider range of guitar designs. This era's seemingly radical instruments echoed the popular cultural focus on space-age modernity. The Fender "Strat" recalled the modern tail fins and imaginative colors of Detroit's cars, while the Gibson Flying V literally appeared ready for takeoff.
Ibanez JEM77WDP Electric Guitar With the Ibanez JEM77WDP Steve Vai Signature guitar, you can get a little piece of the legendary guitarist. This model is also commonly referred to as the JEM Woody because of its distinctive poplar burl veneer pickguard and matching headstock. Part of the company’s Premium line, the JEM77WDP electric guitar also features two cutaways and Steve Vai’s signature monkey grip.

The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
In the following essay I will outline the steps involved in the set up of an electric guitar. These guidelines will not address the nuances of Floyd Rose style bridge assemblies. I am presuming here that the frets on the guitar in question are level and properly seated, but it should be noted that the process of leveling and dressing/crowning guitar frets is indeed sometimes necessary before a set-up can be performed. I am also presenting this outline without an in-depth itemization and discussion of the specialized tools that are necessary for some of the adjustments.
No matter how good a tech may be, his preferences are going to be different than yours on string height, etc. And he is never going to use the exact same amount of pressure fretting a note as you do (affects intonation adjustments). So, the best you can hope for is finding a good tech with good comunication skills, willing to listen to what you want. I'll admit I've never tried to find one, but that sounds more difficult than learning to do the setups yourself, which is what I did.
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
Been in my attic for 20 years...kinda dirty...Rare Vintage Electric Guitar that i have never found an exact pic of on the web...seems like a Teisco Del Rey,but looks earlier than the 60's models ive seen...obviously needs cleaning an repair...but man this thing is cool...a great restoration project...the only marking is the patent number 31-4127 on the truss rod cover...or a Norma or Guyatone version...or just hang it on your wall as a great conversation piece
Fujigen Gakki began operation in 1960 as a classical guitar manufacturer, moving into the lucurative electric guitar markets in 1962. The company was the largest producer of Japanese guitars during the 1960-1980 period. They were known for producing high quality products, especially for the badged guitar market, which is why the company was selected by so many major American brands. It wasn't until 1970 that the company began making products for the venerable Ibanez brand, which was an unqualified success. Fujigen Gakki was the main manufacturer of choice for Greco badged guitars in the 1970 to 1980 period. They also produced guitars for major manufacturer Yamaha. Badged guitars made by Fujigen include Antoria, Epiphone, Jason and Mann. Badged guitars that may have been made by Fujigen Gakki were Marlin and St. Moritz.
The American Nashville B-Bender guitar is modeled after the personally customized instruments of some of Nashville’s top players, featuring a Fender/Parsons/Green B-Bender system, two American Tele single-coils (neck, bridge), a Texas Special Strat single-coil (middle) and five-way “Strat-O-Tele” pickup switching. Ideal for country bends and steel guitar glisses, this Tele is available only with a maple fingerboard.
The F-65 was the top of the line with two equal cutaways. Other than the bookmatched cutaways, this was the same as the two-pickup F-55, with the addition of a Bigsby-made Martin vibrato in which the stylized “M” had become a similar “V” shape. Probably the strangest feature of the F-65 was the fact that the heel of the neck did not change from the single-cutaway models, creating a sort of thick chunk of body extending up to the 14th fret. The first F-65 was #179834. 1,825 F-65s were made from 1962 to the summer of ’65.

While often overlooked, the speakers are an amp’s most crucial component—they’re the last thing standing between all that electronic gobbledygook and the sound that reaches your ears (except for yo’ mama’s fist, but that’s another story). Different sized speakers have different tonal characteristics, and you should consider speaker sizes the same way you’d consider an amp’s wattage rating. Speakers are like booty—small ones are tighter and big ones have more bottom end. But like a pair of pants, cabinet design can shape bottom end as well. Which is why a closed-back 4x10 cabinet may put out more bass than a 15-inch speaker in an open-back cabinet.

Tinkering with the 100+ effects and 30 amp models available using the small screen on the HD500X is not the best experience. The screen is simply too small, and we much prefer the more intuitive stompbox-like layout of the Zoom G3X. You can use up to 8 effects/amp models for a patch at the same time, but can only tweak one at a time. If you hook up your HD500X to your computer and use their software editor, it’s a game changer. The editor software lets you do everything you can on the unit, but with a much bigger (not to mention color) screen - WAY easier than editing on the relatively small, monochrome screen of the HD500X. You can do live editing on the software, drag and drop things in your signal chain (which you get a nice visual representation of), and it applies and syncs immediately. This is by far people’s preferred way to edit on the HD500X, but unfortunately it means you need your computer with you. Since editing all the effects’ parameters is not as immediate as on the Zoom G3X, you can unfortunately find yourself tweaking things to death and figuring out all the settings, rather than just playing and creating new music. As one user puts it:

Created four identical test rigs out of scrap wood from my workshop. They are all 725 x 35 x 47 mm in size, and weigh 651 grams (Alder), 618 g (Koa), 537 g (Swamp Ash), and 818 g (Zebrano). They obviously don’t exactly mimic a guitar, but should for the sake of the test resemble the type of tensions and forces that a guitar body with a neck is subjected to.
We as a team are always extremely inquisitive and wondered about something, which can be anything, happening around us. One day we planned to share these things which are enough to spice up soul of internet freaks and we made Here on, we pick, research and display some really cool examples which hit us somewhere in our daily lives. The website let the visitors to explore chunk of daily stuff they may need to know about. You will get a bunch of trending information from around the globe. Every latest buzz, from footpath to limelight, we have it all, in Article, Charticle And Listicle way with the categories- Taza Khabar, Hottest In Cinema, Top Tenz, Education, Jobs & Career, Tech In Trend, Sports. So, if you’re a viralmaniac, quench your thirst here!
This group contains two effects pedals, which are the noise gate and compressor (and most of the time a volume pedal). You don't want to change that ordering, because of the result of compression. It reduces the variance between the highest peaks of volume and the lowest. And if you haven't taken the noise out of your signal yet using the noise gate, your signal-to-noise ratio becomes lower, making it more difficult to take out the noise in a musical fashion (it'll have more abrupt and noticeable moments of silence).
In the following essay I will outline the steps involved in the set up of an electric guitar. These guidelines will not address the nuances of Floyd Rose style bridge assemblies. I am presuming here that the frets on the guitar in question are level and properly seated, but it should be noted that the process of leveling and dressing/crowning guitar frets is indeed sometimes necessary before a set-up can be performed. I am also presenting this outline without an in-depth itemization and discussion of the specialized tools that are necessary for some of the adjustments.
I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.
sorry this has SOLD OUT: Poor mans Authentic Blues Parlor guitar from way back. This is the real deal used over 60 years this is what some poor share cropper genuine American Blues men would have been able to afford back in the day and subsequently used throughout the south by mostly poor Black folks where the berth of the blues was born of course this is from the place where great things happen BORN in USA baby and is widely considered and is acknowledged to be by most all of our greats in US or British Rockers - Jazz players & Country too all these greats players feel that these original US Southland blues is the truest of ART FORM's PURE and RAW feel it in your soul... this original sounds was not overly sophisticated at all it was RAW that was its beauty this sound from this old Stella is Authentic like that and is RAW and its woods are good - solid Burch wood and actually is an excellent tone wood in fact in those days Burch was widely used and my belief is that is a characteristic in the tone of this Original blues... Classic sound to this guitar OK it has it.... I have a few of these Stella's and love them, when you want to record and lay down an authentic REAL old school style rhythm track or play it on your porch swing and sip mint julip from a mason jar to get in the mood you can do it with this guitar its the real deal. This guitar is old did I say at least 60 likely older that being said it plays well it really kinda does... with pretty good action for what it is as good as it was 60+ years ago I recon. Tuners work, body is in good shape it aint goin anywhere its prety well made it has surface cracks and they are there and not a problem they have been there 40 years and have not gotten any worse not in the 15 years I have owned Stella! Like the movie STELLA! I could not resist the reference but I digress, Condition is Vintage good obviously not new or mint but she is 100% cool Authentic bluesman material if you want that old time Mississippi Delta to Chicago raw blues this old vintage American Icon of a Poor mans Parlor guitar, this is a classic threw & threw... I suppose I could have simply said it sounds good.... ahow ow ow ow.
Sometimes a guitar needs more than a setup, and actual repairs are required. Guitar setup price is minimal when compared to the price of most repairs, so be sure that the problem is not something that can be easily adjusted before making any patch-ups. The cost of repairs can be virtually any price depending on the damage. Refinishing might be over $100, and if a neck needs replacement due to warping, then the price may be several hundreds of dollars. A cracked neck can be glued and clamped for under $100, but the quality of the guitar is unlikely to be regained with this process.

“I was trying to help Henry and shoo him away from areas that he was spending a whole lot of money in,” Schon says. “All this electronical, robot crap. I told him, point blank, ‘What you’re doing, Roland and other companies are light-years in front of you, you’ve got this whole building you’ve designated to be working on this synth guitar. I’ve played it. And it just doesn’t work.’ And he refused to believe that.”
Pedals. I have a basic rule when it comes to overdrives, distortions, and fuzzes: When I engage them, I want the volume to either stay the same or increase a bit, so I’m “pushing” the amp with the pedal. Because drives compress the sound, they can tend to seem louder overall when you turn them on, but actually they might be reducing the overall peak level. I don’t want to diminish the natural output level coming out of my guitar, and I don’t want my guitar tone to vanish in the mix when I hit a pedal. As I mentioned earlier, I often run the tone control quite low on drive pedals, which I feel keeps them sounding warm and natural.
There are a few things to look for in modestly priced amplifiers: at least a 3-band equalizer or EQ ( low, mid, and high), a clean channel and an "overdrive" channel, reverb, and possibly some sort of "presence" control. There are two types of amplifiers: tube and transistor. Many playes prefer tube-style amps, but they can be problematic technically. Just be aware of that.
So there you have five good beginner’s guitars. Bear in mind that while the quality of these instruments is good—it’s a fiercely competitive area—they’re at the bottom of the market. You get what you pay for (as they say). At the same time, “cheap” guitars like these have come a long way in the last ten years and they’re excellent for starting out, before deciding to mortgage your house on that expensive vintage Fender or Les Paul Gibson mentioned earlier.

At Sam Ash, we maintain close relationships with the most prominent electric guitar brands to make sure that we always have the very best, latest selection of electric guitars in our inventory. We carry acclaimed electric guitar brands including Fender, Gibson, Paul Reed Smith, Ibanez, ESP, Gretsch, Dean, Epiphone, Yamaha, Schecter, and so much more! If you’re a discerning player or guitar aficionado looking to add a new guitar to your collection, be sure to check out all the fine, premium electric guitars featured in our exclusive Electric Guitars of Distinction collection.