These probably were not made very long, due to the intensity of the war effort. In 1942, production of resonator guitars ceased for good (except for their brief revival on the fiberglass models of the mid ’60s). The acoustic Hawaiian craze had peaked and was already being replaced by electric Hawaiian music, as reflected in the growing line of lap steels. By the end of World War II, resonators were obsolete, and music would be dominated by big-bodied dreadnought and jumbo acoustics, or electricity.
Probably one of the greatest is Glenn Schwartz, formerly of the James Gang and Pacific Gas & Electric. Considered to be a "white" Jimi Hendrix, he was asked by Jimi to play at what was to be his last birthday party. Glenn played behind his back and with his teeth (now with his gums) before Jimi ever did. Now out of the limelight (and out of his mind) Glenn plays (and preaches) on Thursdays at a blue collar bar in Cleveland. ONE F*CKING INCREDIBLE PLAYER. Should be on any list.
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.
You can use compression not only to keep levels under control but also to increase sustain. Sometimes a guitar part will work better in a track if the sustain is created using a little less overdrive augmented by compression rather than relying on overdrive alone. Even a heavily overdriven guitar sound can be made to appear more powerful if compressed, as its average energy level is increased further, though any noise will also be rendered more obvious. Clean guitar parts can also benefit enormously from compression, as it creates a more dense, even sound and can emphasise the picking attack of the notes when a longer attack time is set. Using a faster release time, so as to cause audible level pumping, can make for exciting rock guitar sounds, but some compressors pump more gracefully than others — Dbx models are quite popular in this respect.
Because bass amps have to reproduce lower frequencies than an electric guitar amp, and it takes more amplifier power to reproduce bass frequencies, a bass player will typically need three or four times the wattage of the electric guitarist.[16] For example, if an electric guitarist has a 100 watt amp, the bassist in the band should have a 300 to 400 watt bass amp. For electric guitar amps with 50 watts or less of power, a bass player may need an even higher multiple. While an electric guitarist will often find that a 50 watt amp will be adequate for rehearsals and mid-size performance venues, a bass player performing alongside this electric guitarist will typically need at least a 300 watt bass amp, six times the power of the electric guitar amp, to get a good bass volume. "More advanced players who regularly gig in small to medium sized venues...typically [use amps that] produce 300-700 watts of output."[17] Bass players using bass stacks in very large venues (e.g., stadiums, outdoor festivals) may use amp heads that put out 750 to 2000 watts of power. British rock bassist Mo Foster tours with a 1,500 watt bass rig.[18] Somewhat controversially, as there is no clear engineering support, many think that a tube bass amp will sound louder than a solid state bass amp of the same wattage.[19]
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.

Palmer is a Miami, FL based guitar maker. They have high end models made in the states and cheap models contracted out to the highest bidder like most guitar maker today. I would say that if you tried to sell one of these, you would most likely not get what you paid for it new because they are simply made cheaply in huge numbers. They eventually turn up at used music shops and garage sales around the country. I wouldn't pay more than $50 for one myself and did just that. They make good campfire guitars.
This is another budget guitar that is routinely praised for the excellent value for money it provides. Many reviewers point to its playability as its strongest point, which is not surprising given that this guitar is from Ibanez. There were even several people who wrote in their reviews that they liked the GRX20Z so much that they had bought it more than once.
Their LP models have a "mahogany" body, and the binding is very thin so I think the maple top is just vaneer. I also noticed the headstocks were not the usual LP angle. In my opinion, Epiphone wins hand down. The Strat types don't look much better in my opinion, again, sharp fret ends and awful looking headstock and logo. If you see any of their relic jobs, you'll notice that they range from passable from a distance to hideous from any range.
An Auto-Wah is a Wah-wah pedal without a rocker pedal, controlled instead by the dynamic envelope of the signal. An auto-wah, also called more technically an envelope filter, uses the level of the guitar signal to control the wah filter position, so that as a note is played, it automatically starts with the sound of a wah-wah pedal pulled back, and then quickly changes to the sound of a wah-wah pedal pushed forward, or the reverse movement depending on the settings. Controls include wah-wah pedal direction and input level sensitivity. This is an EQ-related effect and can be placed before preamp distortion or before power-tube distortion with natural sounding results. Auto-Wah pedals include:
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.

My epi is very nice (Almost like a gibson for 1/3 of a gibson price) and obviously, my Jackson is far superior than my other guitars. But I'm just have mid end ibanez guitars and they are very good guitars. The high end ibanez are awesome and worth less than high ends of other brands in most cases having with the same quality (or superior in very cases).

STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.
Want to know more about how to distinguish all these guitars? Until a few years ago there wasn’t a good (or any!) English language reference book for Japanese guitars of the 1960s. But my co-author on this piece, the esteemed Frank Meyers of Drowning In Guitars, has written an excellent primer on this subject which can help demystify the confusion around a lot of these guitars. You can pick up your own copy here.
Madbean Pedals provides schematics and circuit boards so you can create your own pedal kits. As the creator, Brian, describes it, “I love making music and I love making things, so pedal building is a happy accident for me. Mostly, it came from being too broke to buy any gear. I owned and used only two pedals for about a decade: a TS-10 and a Digitech PDS-1000 Digital Delay. I used those for both my bass and guitar gigs. Even my drum gigs, I think. Anyway, rather than spend money I didn’t have, I decided it would be more fun to take a “peek under the hood” and see what the whole effects thing was about. That was about six years ago, and the obsession grows a little more every day! “

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red

Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.

This guitar follows after the tried and tested formula of old Stratocaster design, from the double cutaway alder body to the bolt-on maple neck, down to its triple single coil pickup configuration. The scale length follows after traditional builds at 25.5", while the neck profile (modern C) and narrower nut width of 1.65" makes this guitar viable for modern players. While it doesn't have vintage voiced pickups, the default pickups are not so bad either, and will give you the distinctive Strat tone that almost everybody loves.
For any venue, it's important to bring along the right amp. A huge amp in a tiny club is not only overkill; it's also extra setup work that you can avoid altogether with a smaller combo amp. On the flipside, a little amp in a big theatre could mean that some of the audience won't even hear you. Take your time deciding what the best option is for you.
The amp and cabinet modeling is probably the weakest link of the Zoom G3X. Make no mistake - it’s nice to have customizable amp and cabinet pairings in a practice or headphones scenario, or if you simply don’t have a guitar amp yet. It’s just difficult to replicate the character and “oomph” of a vintage tube amp. This isn’t so much a knock on the G3X as it is of most amplifier modeling.
Aimee, by Pure Prairie League, Love,Me by Collin Ray, Where have you been, Kathy Matea, Landslide, Fleetwood Mac, The Reach, Dan Fogelburg, The Seven Bridges Road, The Eagles, Longer, Dan Fogelburg, Fire and Rain, James Taylor, Your The Lucky One, Allison Krause & Union Station, Time in a bottle, Jim Croce, Whenever You Come Around, Vince Gill, Man of Constant Sorrow, (as performed by Union Station),
This guitar is the J Mascis signature, specifically spec’d out by the man at an affordable pricepoint. Jazzmasters will never not be cool, in part because their versatility tends to exceed expectations. Like the Modern Player Tele above, Fender leveraged much-improved Chinese production to bring this in under $500. They also opted for lesser P90 pickups compared to the expected (and usually truly excellent) proper Jazzmasters, but many players won’t notice this.
Similar to the previous model we mentioned, Squier by Fender Bullet Strat represents the Stratocaster beginner family. It’s a guitar full of tradeoffs, but you are rarely going to find a model more capable in this price range. I’ve played a lot of these, and even have one which I use strictly for practicing at home. I like it, even though it’s somewhat limited.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: ibanez","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"gretsch guitars","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}
The 5-position switch controls which pickups are activated. On a standard Strat, the position closest to the neck activates only the neck position pickup. The position next to that activates both the middle pickup and the neck pickup. The middle position activates only the middle pickup. The next position activates both the middle pickup and the bridge position pickup. The last position activates only the bridge position pickup.

Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!

There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.
This is another best budget electric guitar from Epiphone. It is also a great choice for a beginner and it is quite lightweight to carry. For an inexpensive guitar, this one has a pretty good sound and tone. Despite being low priced, the manufacturer has not compromised in its quality. The cherry red color is really attractive and appealing and can help you to boost up your smart personality as a guitarist. This is closer in look to the iconic rock guitars.

From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!

There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.

The Articulations page exposes all of the Shreddage II articulations to the user in a fully-customizable mapping scheme. The user can activate articulations via keyswitches or velocity ranges. The Engine page reveals the back end of Shreddage II for users seeking to tweak Shreddage II into the ultimate performance tool, with controls for velocity response, transposition, pitch bend range, resonance controls, pedal behavior, and control over noises like release and pick.
What's funny is that guitars with cheap pickups very often sound better direct than guitars with "good pickups". I have an Epiphone Special I with ( presumably GFS ) P90-style pickups and that thing sounds great direct. It's also fine with a band thru an amp if the band doesn't play too loud - if the band's too loud the low mid buildup means you gotta EQ a lotta bass out and it loses it's girth.
Like a door that's repeatedly opened and closed, you'll sometimes need some basic maintenance. Ensure everything is tight, and get some electronic contact cleaner (available at any electronics store), various screwdrivers and wrenches and you can often solve your own problems. It's easier on a Gibson Les Paul (with backplate access to the controls) than on a Gibson ES-335, but it can be done.
Beavis Audio Research – started in 2005 as a hobbyist site to share information on DIY guitar electronics. From the initial few pages of questionable designs, it has grown to a popular place for DIY freaks to visit and learn. Along the way, beavis has evolved into a small company. They strive to advance the DIY ethic and provide resources, tools, kits and products to the worldwide community of gearhounds.

Make sure the notes you do want to play actually come out well-audibly. Good technique and dynamics go a long way here. Listen to your playing and take care that important melodic notes really come out, whereas accompaniment is often better subdued. Palm mute is useful so you can give notes a distinct loud attack without causing an indistinct muddle of cross-ringing notes. Also, make sure you play well in time and with good intonation.

No information beyond this debut is available. It’s also probable the Merson “Tempo” name was applied to other acoustic guitars. Merson instruments from this period do not appear to have been widely distributed, so they are probably a regional phenomenon, although they did get notice in The Music Trades, a major trade publication. Other instruments distributed by Merson in 1948 included Harmony, Kamico, Favilla, Temp and Supro electric guitars and stringed instruments; Covella, Fontanella and Galanti accordions; Tempo Bandmaster, Merson, Merson Ultratone, and Rudy Muck brass instruments; and Kohlert Thibouville, Freres, Penzel-Mueller, Barklee and Merson woodwinds.
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.
Martin Guitars has a storied history that dates back as far as the mid-1700s when Christian Frederick Martin was born to a family of modest German cabinet makers. At the age of 15, Christian Frederick traveled to Vienna and took up an apprenticeship with a renowned guitar maker, where he flourished in his craft. Years later and after a feud with the Violin Makers Guild, Martin decided to move his business to the United States, opening up shop in New York City. More than 100 years later (and through many trials and tribulations), Martin introduced their signature Dreadnought acoustic guitar, the same shape as the one pictured above. Funny thing is, it was actually based on a defunct style created by another company years prior. Now the standard for acoustic guitar shapes, nearly every manufacturer offers a version of the instrument made popular by Martin. Currently, the brand is run by Christian Frederick Martin IV, the 6th generation of the Martin family – and they’re still making some of the best instruments in the world.
An excerpt: “First let us dispel the popular, but completely wrong belief that ‘any guitar will do for learning to play.’ Your first guitar should be carefully chosen to be fairly easy to play and tune. It should also be versatile enough for you to be able to play different kinds of music on it. For this reason, and to avoid the complications and expense of an amplifier, an ‘acoustic’ (un-amplified) guitar is recommended.”

So where do you start in a section as massive as this one? From acoustic to electric, nylon to steel stringed, hollow body to solid body, all styles are represented here, so having a good idea of what you're looking for will definitely help. The best place to start is usually with the brand, as each one has a reputation for something different, allowing you to narrow things down from there. For example, you'll instantly recognize names like Fender, Gibson and Ibanez as trailblazers of the electric guitar, while others like Martin, Taylor, and Breedlove are more famous for the unparalleled quality of their acoustic instruments. After that, you'll want to look at things like body type, tonewood, strings, size, orientation and performance level. Once you have a general idea about each of these, your decision gets that much easier. Just remember, it all comes down to personal preference, so as long as you're happy with the guitar you choose you can't go wrong. The guitar is a special instrument, with a different meaning to every player. Whether you're taking your first steps into the world of music or you're a professional rocking out in front of sold out stadiums all over the planet, strumming, plucking and picking on a guitar is a way to express yourself that can't be duplicated with anything else. So pick up a guitar here and start playing... you'll be glad you did.

While Ujam has only been in business since 2010, their members aren’t new to VSTs or even guitar VSTs for that matter. In 2002, Steinberg released Virtual Guitarist, developed by Wizoo, and this was one of the first VSTs that brought credibility to guitar VIs. It just so happens that the man that founded Wizoo, Peter Gorgers, founded Ujam and brought along many of the members, ensuring the same level of detail.

Eric Patrick Clapton, CBE, is an English musician, singer-songwriter and guitarist. He is the only three-time inductee to the Rock and Roll Hall of Fame: once as a solo artist and separately as a member of the Yardbirds and Cream. Clapton has been referred to as one of the most important and influential guitarists of all time. Clapton ranked second in Rolling Stone magazine's list of the "100 Greatest Guitarists of All Time" and fourth in Gibson's "Top 50 Guitarists of All Time". He was also named number five in Time magazine's list of "The 10 Best Electric Guitar Players" in 2009 In the mid-1960s, Clapton left the Yardbirds to play blues with John Mayall & the Bluesbreakers. Immediately ...more on Wikipedia
If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.
The pre-1945 braces have a scooped or "scalloped" profile, making them lighter in design and weight. Functionally this means a greater vibrating surface (the guitar's top), and provides stronger bass response. Why did the Martin Company change from the lighter scalloped braces to heavier braces? The answer is in the strings. Many guitarists of that time were using heavier gauge strings, and these heavier strings were tough on the lightly constructed scalloped-braced Martins (especially on D-models with the long 25.4" scale). Martin didn't make a heavier guitar to withstand the extra string tension, so they compensated by adding more rigid (non-scalloped) braces to the guitar's top.
The type of potentiometer you should use will depend on the type of circuit you are designing for. Typically, for audio circuits the audio taper potentiometer is used. This is because the audio taper potentiometer functions on a logarithmic scale, which is the scale in which the human ear percieves sound. Even though the taper chart appears to have a sudden increase in volume as the rotation increases, in fact the perception of the sound increase will occur on a gradual scale. The linear scale will actually (counterintuitively) have a more significant sudden volume swell effect because of how the human ear perceives the scale. However, linear potentiometers are often used for other functions in audio circuits which do not directly affect audio output. In the end, both types of potentiometers will give you the same range of output (from 0 to full), but the rate at which that range changes varies between the two.
Fretsizes can be confusing.  They are small measurements but have a big impact on feel and the size designations can vary.  Its best in my opinion to think and talk of frets in their actual crown widths and heights rather than the old Dunlop numbers (the originator of the 6xxx numbering system) as they can mean different things to different people; i.e. Warmoth lists 6105 as .095-.047" while USACG has is at .090-.055" - these are two very different feeling fretsizes. 
If you love the Telecaster look and sound, then here’s a great entry level Tele for beginners. In fact, “entry level” really doesn’t do this Telecaster justice. I’ve considered buying this exact model for myself–for times when I need to record some true single coil tones. If country twang is your thing, this is the guitar to get started with. But the Telecaster isn’t a one-trick pony. Plenty of rock (and even metal) players have used Telecasters over the years. Swap that bridge pickup with a single coil-sized humbucker and you’ve got a guitar that can do rock and metal with the best of ’em.
Even when using noise-cancelling pickups, guitars tend to be relatively noisy sound sources, especially when used in conjunction with high levels of overdrive, either from a pedal or an amplifier. High levels of gain are needed to produce overdrive sounds, so any source noise will be increased accordingly. If an attempt is going to be made to remove some of the noise by electronic means (such as a gate, expander or single-ended noise-reduction unit), it may be best to leave this until the mixing stage, so that an incorrectly set gate or noise filter doesn't ruin a good take. However, gates should be used before delay or reverb effects to prevent the tail end of the sound being shut off abruptly when it falls below the gate threshold. If you simply have to record with delay effects, a dedicated guitar gate pedal placed before the delay unit will probably work best. If you are also using an overdrive pedal, then the gate should come after this so that it can deal with circuit hiss as well as hum from the guitar pickups. Note that all-in-one floor units tend to include gates at an appropriate point in the signal path, between the overdrive/amp section and the effects.
What worries Gruhn is not simply that profits are down. That happens in business. He’s concerned by the “why” behind the sales decline. When he opened his store 46 years ago, everyone wanted to be a guitar god, inspired by the men who roamed the concert stage, including Clapton, Jeff Beck, Jimi Hendrix, Carlos Santana and Jimmy Page. Now those boomers are retiring, downsizing and adjusting to fixed incomes. They’re looking to shed, not add to, their collections, and the younger generation isn’t stepping in to replace them.
Hawaii was key in the development of the electric guitar. There was a giant Hawaiian craze in the 1910s and 1920s, with a rise in popularity of the island’s sounds and culture (as often seen in movies and Broadway performances). Integral to Hawaiian music is the Hawaiian-style steel guitar, which most of early electric guitar development modeled itself after.
@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.

The written history of the classical guitar can be traced back to the early 16th century with the development of the vihuela in Spain. While the lute was then becoming popular in other parts of Europe, the Spaniards did not take to it well because of its association with the Moors.[citation needed] Instead, the lute-like vihuela appeared with two more strings that gave it more range and complexity. In its most developed form, the vihuela was a guitar-like instrument with six double strings made of gut, tuned like a modern classical guitar with the exception of the third string, which was tuned half a step lower. It has a high sound and is rather large to hold. Few have survived and most of what is known today comes from diagrams and paintings.
Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .
Although electric guitar sounds vary dramatically, they are all essentially midrange instruments with little or no extreme high- and low-end information. With the tone controls on the amp and the guitar itself, recorded electric guitar sounds often need little in the way of EQ if the desired tone was produced at the recording stage. However, if the sound needs a bit more bite, try boosting the upper mids somewhere between 2.5 and 5kHz. For added warmth, a little boost around the 250Hz range should thicken the sound, while muddiness is often dealt with by cutting a few dBs at around the 200Hz mark.
The full-size Davidson guitar features a maple fretboard consisting of strings that sound very pretty good once you have tune it right out of the box. This Davidson full-size electric guitar comes with die cast tuners designed to keep it in perfect sound shape, followed by a practice amp having an overdrive body, which makes the practice exercise easy and fun-filled. The amp can be tuned with an iPhone App and by the time you set this baby to work, you will surely get your neighbors screaming for the peace.
I've been playing guitar for several years now so I have played a wide variety of instruments. Of course bigger companies such as Martin or Taylor are going to be higher up in the ratings because they produce very expensive guitars and their name has been widely spread. My first ever Yamaha six string, which after three years is still my favorite guitar, is amazing. Its deep and rich tones makes it a blast to play. I can find myself playing any genre for hours because of how reliable and durable it is. They are very well priced for there quality and I would label Yamaha as being the working mans guitar.
As both the British invasion and the 1960s came to an end, Rickenbacker guitars fell somewhat out of fashion; however Rickenbacker basses remained highly in favor through the 1970s and on. Perhaps as an echo of the past, during the late 1970s and early 1980s, Rickenbacker guitars experienced a renaissance as manyNew Wave and jangle pop groups began to use them.
High-end builders of today have gone back to germanium en masse for their classic fuzz tones, and most of them test their transistors to sort out the few that will do the job correctly. They put them in anything from vintage-style units—like Fulltone’s ’69, Frantone’s The Sweet, and Roger Mayer’s Classic Fuzz—to way-out updates of the breed—such as Z.Vex’s Fuzz Factory.
The four fingers of the left hand (which stop the strings) are designated 1 = index, 2 = major, 3 = ring finger, 4 = little finger; 0 designates an open string, that is a string that is not stopped by a finger of the left hand and whose full length thus vibrates when plucked. On the classical guitar thumb of the left hand is never used to stop strings from above (as is done on the electric guitar): the neck of a classical guitar is too wide and the normal position of the thumb used in classical guitar technique do not make that possible.
While most think of the history of American guitars in terms of American manufacturers, if you’ve followed this column you know the tradition is much richer. Among the major players in the American market were the many importers and distributors who enriched the guitar landscape with instruments – usually at the lower ends of the market brought in from other countries, primarily from Europe, Asia, and to a lesser extent, Latin America. The analogy with automobiles is obvious. While we tend to think of the automobile industry in ethnocentric terms, it’s impossible to think of “cars in America” without considering Volks-wagen Beetles, Toyota Corollas or Datsun Zs (Yugos and Renaults deliberately ignored).

I always respond to these enquiries as I have played some in UK shops and like them a lot .Well designed and made though I am sure the odd duffer gets through like most imports .Trev Wilkinson did the designing ,though it should really read ,modifying ,as most are other makers basic designs,.The Les Paul lemon drop is superb judging by reviews and I loved their S types ..Worth the money it seems .I would prefer a Vintage Strat , 335 or Les Paul to the other cloned alternatives .I did buy an Epiphone Dot but after playing a Vintage 335 ,wish I had bought it instead .The ones I played were Chinese
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona.[27] Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company.[28] In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric.[29] Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster.[30] Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.

If you plug your electric guitar into the auxiliary input of your home stereo, you can get away with not buying an amp at all. All you need is a special, inexpensive adapter that you can purchase at any electronic or music store for less than $3. The adapter is just a metal or plastic-coated plug that has a female quarter-inch jack on one end and a male RCA (sometimes called phono) plug on the other. (Just tell the salesperson what you want to do, and he can supply the correct unit.) The following figure shows how the adapter and the guitar cord work together.
This Yamaha Pacifica features a Strat sound that is very good, especially since the humbucker can be tuned into a single pickup by lifting up on the tone control. Like with every other strat, it has a five-way switch which allows the player to select the bridge pickup, the bridge+middle pickups, the middle pickup, the middle+neck pickups, or just the neck alone. In the event that you are tired of the strat sound and you would like to return to Led Zeppelin, simply flip to the humbucker and get set to go!
Ok so currently i run a Mesa 20/20 along with a GSP1101 and a MXR 10-Band EQ pedal. I love the MXR but would like to get a EQ in rack form. I see about a millon rack EQs out there but not sure which ones are made for guitar? They seem more focused on live sound/PA/Home recording..I am not sure if there all the same, Meaning a PA EQ will work for a guitar rack.
MAKE YOUR OWN BODY BLANK Another neat trick to create your own body blank for $10 is to get a 3/4" thick peice of Birch Plywood that comes cut into a 4' by 2' board. Simply cut out two rectangular sections of the board that will accomodate your desing and wood glue them together. Be generous with the glue to make sure there aren't any spaces between the boards when you press the two together, clamp and stack weights on top of it so the two peices are joined firmly and let dry overnight. This gives you a a 1 1/2" thick body blank that is rigid and works great for electric guitars. You will have to go with a solid color paint when you finish it but you won't be able to tell the difference between it and the solid wood blank. Plus you'll save a good chunk of change that you can use towards good pickups and hardware. If you want to make the body a little thicker, you can get a 1/4" peice of birch and glue it between the two thicker peices. It's also a good idea to prerout any wire cavities in that 1/4" peice before you glue them together. That way you don't have to worry about drilling them later and ruining the top of your guitar body with the drill.
Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.
This is another budget guitar that is routinely praised for the excellent value for money it provides. Many reviewers point to its playability as its strongest point, which is not surprising given that this guitar is from Ibanez. There were even several people who wrote in their reviews that they liked the GRX20Z so much that they had bought it more than once.
Who are you to state that Taylor guitars are among the best in the world? Are you from California? I don't and many other don't feel that way. Taylor just does not have the sound of other fine acoustical guitars. I'm not putting Taylor down. It's a well built acoustic but I don't quite like the sound of them. That's a biased and very bold statement you made about Taylor and it's not true. There are so many great acoustic guitar builders around this planet that do build superb guitars. Please, lets not put a Californian Company biasedly on top of everything on the planet. Can we do this please? I apologize for this email but what you stated is so unfair for all of the others guitar companies that build outstanding guitars, worldwide.
Since there is little difference outside of the individual guitars featured in this series, I will nitpick a bit and say that RealLPC has the worst GUI of the four.  Where there was never any difficult-to-read text on RealStrat, there is some here, and the weird navy green parameter boxes along with a black Les Paul with gold trim doesn’t sit well for me.  
12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.
Ask anyone at all if they've heard of Ibanez, and you'll most likely get a 'yes'—even if it's not a guitarist or even a musician that you're asking. It takes a lot for an instrument maker to become as well-known outside the music community as it is inside, and Ibanez is one of the elite luthiers that has managed to do just that. How have they done it? Simple: by making instruments so sought-after that they can be found nearly everywhere. Originally founded in 1957, Ibanez is one of the "original" manufacturers from the formative decades of the electric guitar as we know it today. Ibanez was one of the first Japanese companies to break through to the international music industry as well as, even more impressively, the very first brand to mass-produce seven and eight-string guitars. That makes extended-range guitars an important part of the Ibanez legacy alongside their many classic 6-string models. Some of the most renowned Ibanez instruments include hollow body guitars like Pat Metheny's signature model, and distinctive solid body axes such as the Iceman and Fireman series. You'll also find a wide assortment of basses, including 5 and 6-string models that join the 7 and 8-string guitars in the extended-range Ibanez family. There are plenty of acoustic and acoustic-electric guitars and basses to choose from as well, not to mention mandolins, banjos and ukuleles. Ibanez has a prolific catalog that spans the whole guitar family, offering something for anybody who loves to work the strings. In addition to stringed instruments, Ibanez is also renowned for a broad range of effects pedals, amplifiers and accessories. The TS808 Tube Screamer, for example, is an effects pedal that's beyond legendary. The unmatched warmth and tone of its overdrive makes the TS808 a must-have item for countless guitarists. Connect it to an amplifier like the TSA30 Tube Screamer 1x12 Combo Amp, and you're rocking an amazing recipe for serious vintage sounds. Ibanez was an early player in the electric guitar game, and their instruments, pedals and amps are certain to be on stages the world over for decades to come. Make yourself one of the artists that takes Ibanez onstage at every gig and this gear will pay off in spades with the incredible sounds that made them an industry giant in the first place.
Almost all big guitar makers have their affordable entry level guitar models and product lines. Guitar for beginners is a market that none want to ignore. The famous acoustic guitar makers in Northern America like Martin, Taylor  and Seagull provide high quality acoustic guitars for professionals and experienced guitarists. They build their brand image among the guitarists by making great sounding and great craftsmanship guitar.
It features a handsome Grand Auditorium shape with a soft cutaway for good access to the higher frets, while the satin-finished sapele neck is incredibly playable – as is the case with all Taylor guitars. The iconic brand keeps costs low with laminated sapele back and sides paired with solid Sitka spruce on the top, as well as producing it in the respected Mexican facility.
The new AC15 'Twin' retains the all-important dual-EL84, cathode-biased output section of its forebear, but otherwise it's very different. A quick scan across the top panel reveals two inputs for independent access to either normal or top boost channels. One benefit of the bigger, 2x12 enclosure is that it provides ample room for a full-length reverb tank, housed in the bottom. There's also an in-built tremolo effect, with controls for depth and speed. But the whole point of this amp is the pair of 25-watt Celestion G12M Greenback speakers. They are the speaker of rock in so many cases and while purists might hope for Celestion Blues, they would add a good £300 at least to the price; and he increased power handling of two Greenbacks on the end of just 15 watts is quite a tantalising prospect. It's fair to say that even with the master volume set-up, the magic doesn't really start happening until the amp's lungs are at least half way open, but happily, that's not far from perfect for many of today's pub and bar gigs - it may even be too much for some. The AC15 'Twin' does sound magnificent when clean, but listen carefully to those amps or this and it's rarely completely undistorted. That harmonically rich drive that was never supposed to be there is the key characteristic that latter day, non-master volume AC users find hardest to replicate.
Slow Gear – A dynamic effect created by BOSS that swells in volume as if you were riding the volume knob on your guitar. The effect is similar to the envelope of a violin with its ability to remove the “attack” or initial transient of the signal and produce gradual volume swells. The compact pedal version of this effect is discontinued but it is found in both the ME-80 and GT-100 multi effects pedals.

So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
But here’s the thing: every single useful DAW is available for a 30-day demo or so. So you can at the very least try before you buy. The only downside is that some of these are only available in their full “pro” versions, so if you’re on a budget, you can get the 30 day (or more : REAPER has a 60 day demo and only costs $60 if you keep it, but I don’t know if you’d do live stuff with it… some of the fun will be figuring out all the tech).
omg guitar playing isnt just about speed and technically skill. its about style and uniqueness of sound, as shown by tom morello and jack white. most of those metal guitarist, with quite a few exceptions ill admit (tony iommi, john petrucci, randy rhoads & van halen, and joe satriani & steve vai), sound EXACTLY THE SAME. i think you need to expand YOUR musical taste.
@Dax – Sorry to hear that you are having trouble with the pedals in your setup. If the pedals work on their own in front of the amplifier isolated one at a time, this is likely related to a setting or connection with the pedals. Please shoot us an email to with full details on the amp make and model, the inputs and outputs used on both the amp and each of the pedals, and the setting of the switch on the back of the pedals. Also, include whether this happens on every preset or only certain presets with each pedal.
Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.

Often the names and appearances of these pedals will give you a clue as to what types of sounds they produce. Otherwise it's a good idea to look at interviews and endorsements to learn which distortion stompboxes your guitar heroes are using. Also, be sure to check out our videos and audio clips to get a sense of each distortion pedal’s capabilities.
More theory: tone knobs are basically adjustable resistors with certain values. The higher the value of your potentionmeter (hence “pots”), the more treble you allow to pass. This is why Fender guitars with their bright single coil pickups have 250K pots, while Gibsons with humbuckers have 300K to 500K pots. Some guitarists emply 1000K pots for maximum treble, and some make pots that when maxed out, make it seem to the circuit that it is not present, allowing all frequencies to pass through.
Some bridges have a lock position and at this point should be engaged. Other floating bridges will need to be stabilized by using pieces of wood fitted inside the cavity (accessed from the back of the body) to prevent the tremolo block from moving. Vintage Fender-style tremolo bridges can be stabilized by fully tightening the spring tension screws. Whatever method is used, the bridge must sit as we will want it to when we are done with the set-up procedure- parallel to and nearly flush with the top- so care must be taken at this stage to get the position of the bridge right.
This guitar is one of the most popular choices for those looking for a quality acoustic guitar under $500. It comes in a dreadnought size or concert (smaller body) size. It also comes in a variety of colors (10 at time of writing). Some of the features of this acoustic are: Spruce top, rosewood back and sides, new scalloped bracing. Owners describe the sound of this guitar as full, bright, and balanced. It will surely bring a smile to your face as you strum chords for hours while learning new songs. See all the available color choices for this guitar here.
I got this guitar just a couple months ago, not knowing much about guitars and not really knowing much about quality or anything I did a lot of research about what would be the best purchase for the right price for a beginner guitarist.. and I stumbled upon the Yamaha FG700, Fantastic reviews and ratings for beginners with great overall quality and overall sound, especially for the cost. I did a bit more research, comparing instruments and what not just to be sure I didn't purchase something that was made out of cardboard and shoe strings when I stumbled upon the Yamaha FG800, which was said to be the upgrade of the 700. I did some reading and though it didn't have as many reviews it was said to have improved sound and durability for the exact same price. Knowing that Yamaha has pretty much always been rather good quality

Next was Eunice's ‘electric guitar’. It was beautiful and hardly used. However a common problem with guitars of this era were the horrible pickguards made from celluloid that would off-gas while in storage and then wreak havoc over the guitar’s other parts. Upon closer inspection the guitar was actually dripping wet from the many years of storage in the hard case.

Description: Body: Mahogany - Top Wood: Mahogany - Neck Attachment: Set - Neck Wood: Mahogany - Neck Construction: D-Shape - Fingerboard: Ebony - Frets: 24 - Inlay: Pearl - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Ebony - Hardware: Black, Grover Tuners - Pickups: Seymour Duncan Live Wire - Pickup Configuration: Dual - String Instrument Finish: Charcoal Burst, Vintage Burst
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: amplifiers","prop1":"[mf] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
Acoustic and electric archtops are identical in design with the only difference being the addition of electro-magnetic pickups and pots. Archtops can either be full-bodied or thinline. The full-bodied archtop retains good volume and acoustic resonance when played unplugged though feedback may be an issue when amplified. The thinline body minimizes feedback by sacrificing acoustic volume and resonance.
The advantage of this specific package is that you’ve got everything you need to get started right away: guitar (duh), amp, strings, tuner, guitar cable, picks, gig bag, strap, and instructional DVD. Those of you who just wanna get a guitar and start, this is your choice. Squier also makes similar package, but I recommend this over the Squier because the parts (electronics) are higher quality, although the Yamaha costs a little bit extra.

ACTION DEL BRACCIO È possibile regolare l'action del braccio del tremolo utilizzando una chiave a brugola da 3,0 mm sulla vite (B) del tremolo. ACCORDATURA DI PRECISIONE Dopo aver fissato il bloccacorde, utilizzare gli accordatori di precisione per eseguire le regolazioni di precisione dell'accordatura di ogni corda. Regolare tutti gli accordatori (C) al centro della rispettiva corsa prima di fissare il bloccacorde.
Phasers work in a way similar to flangers, but this time the copy of the signal is filtered to bring it slightly out of phase. This creates a sweeping, futuristic sound at cranked-up settings, but dialed down will get a chewy, textured tone that’s even suitable for rhythm playing. Eddie Van Halen is one guitarist well-known for his application of the phaser. Today he employs his own signature effects pedal, but his classic MXR Phase 90 is legendary among guitar tone nerds.
Electric instruments have a big role to play in the world of music, but there's a catch: they need amplification to do it! For that matter, even acoustic instruments need to be boosted when they're playing big venues. And while an amp alone can handle those tasks, many of the sounds in modern music (the signature distortion of rock and metal, for instance) rely heavily on effects units to shape the basic tone into something even better. If you're new to your instrument, then consider this selection of amplifiers and effects the doorway to your future sound - and your instrument will be the key that opens it up, once you've got your hands on your brand new hardware!
Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.
Producing one of the most popular clean sounds in rock, you’ll rarely see a solid-state amplifier with as much notoriety as the Roland JC-120. The amp was introduced in 1975, offering pure “JC Clean” sound with 120 watts of power and a built-in Dimensional Space Chorus effect. The JC-120 features dual 12” speakers plus dual power amps that drive the speakers to their full potential for a stunningly clear sound. As a result, the amplifier became a favorite among players like Andy Summers, Robert Smith, Johnny Marr, Jeff “Skunk” Baxter and more.
The classical guitar repertoire also includes modern contemporary works – sometimes termed "New Music" – such as Elliott Carter's Changes,[17] Cristóbal Halffter's Codex I,[18] Luciano Berio's Sequenza XI,[19] Maurizio Pisati's Sette Studi,[20] Maurice Ohana's Si Le Jour Paraît,[21] Sylvano Bussotti's Rara (eco sierologico),[22] Ernst Krenek's Suite für Guitarre allein, Op. 164,[23] Franco Donatoni's Algo: Due pezzi per chitarra,[24] etc.
PRS is an American guitar company founded by luthier Paul Reed Smith in 1985. It makes some of the finest high-end electric guitars and custom shop instruments. It was extremely popular in the '90s and eventually spread to Asia, where they started the SE lineup that was more affordable and budget-friendly. However, they are not meant for beginners even though they cost less. They are used by musicians and players of all kinds of genres. The high-end models are classy and can be somewhat expensive.
One half step down from standard Drop A. Used by bands such as Trivium on some songs from Silence in the Snow and The Sin and the Sentence, Destrophy, TesseracT, Brian "Head" Welch, After The Burial on some songs from their Rareform, In Dreams and Dig Deep albums, Within the Ruins, In Hearts Wake and Periphery. Jim Johnston used this tuning for the song "I Bring the Darkness (End of Days)".
Watching the short documentary posted above about Joe’s youthful experiences with MXR pedals was a real treat for me and sent me nostalgically back to those childhood days discovering pedals with my friends. I don’t know a whole ton about Joe’s use of particular pedals and such, but I’d definitely love to learn more. I do, however, appreciate how indispensable they are to an electric guitarist, especially a supremely talented one like Joe. Watching Joe’s fingers as he plays is magic, but I definitely need to start paying attention to how he’s playing guitar with his feet.
Modulation effects (like phaser and flanger) follow effects like wah and overdrive. This allows the modulation effect to process and modify the tone built by the effects before it. If you put a modulation effect before the overdrive, then you are overdriving the sound of the flanger. This is a lot more difficult to control so the ME-80 places it after these effects.
Clapton is good… not gonna argue that he is an amazing guitarist… but no where near the best guitarist of all time…. Satriani can play ANY clapton riff, solo, song, chord progression, whatever.. Clapton can’t come close to playing any of Joe’s stuff. And most of Claptons best songs are JJ Cale tunes. Cocaine, Layla, After Midnight, etc,…. etc…. Oh and Clapton put out a whole album dedicated to Robert Johnson and admitted that most of the songs are redone and reworked because “the man” Clapton couldn’t play em anywhere near as well as Mr. Johnson.

As the text says, the pick wasn’t exactly identical with all the samples. This would make for the differences alone: The movement of the string must not be imagined as a plain two dimensional one. In fact it’s rotating in three dimensions, while the pickup only senses that part of the movement which is perpendicular to the deck of the guitar. The vibrations direction changes all the time and does so for each frequency component (read: harmonics) independently.

It's like saying the wood handle of a hammer effects the tone generated by hitting a nail. The nails been hit, vibrations through the wood afterward are pointless. Unless the guitar itself is metal and hollow, you would hear sound generated acoustically, as you would with any acoustic instrument. An electric guitar is not an acoustic instrument in a classical sense.
I agree that you should spend more on the guitar than the amp, but if you have a nice guitar and a cheap amp, you aren't giving the guitar enough width and breadth of tone capabilities to warrant spending $1500 or more on a guitar. So, if you're going to spend over $1200 on a guitar, don't buy a lousy amp. A Peavy 30 is a decent amp, but is short on breadth of tone as compared to a Fender Deluxe Reverb 22 watt. Marrying the guitar and amp is an important part of the process, they are symbiotic. My advice, as a player for over 40 years is to buy as good a guitar as you can. For beginners, a bad guitar will not get you playing, in fact, the most common reason young novices stop taking lessons is that the cheap junker they got is unplayable, even by professionals. It's hard, not fun, seems like a world of work and they quit. That's not how it's supposed to be. It's a fun thing, so get out there, get a good playable instrument and you are on your way to a lifetime of good times.

If anyone has earned the right to two spots on this list, it’s Fender. Sitting squarely at the top of the guitar and amp game, this Southern California company might be at their peak at this very moment – and that’s a very good thing for you, if you want to get into playing guitar. This Super Champ X2 amp is a hell of a value, boasting the welcome bounce of Fender’s signature sound in a package that wont break the bank. And what’s even cooler about it is that it has 16 different amp modeling selections – meaning you still get the warmth of tube amplification with the right amount of modeling amp versatility. It also comes with two channels that can be controlled via an optional footswitch, and it’s equipped with a USB port for easy and quiet recording.

The best place to start is with a small tube amp. This kind of amp is far less forgiving, leaving you nowhere to hide. It sounds counter-intuitive, I know. You’re looking for the best choice and here I am telling you one that will make things more difficult. But think of it as tough love – forcing you to confront your technique and learn the right way to play a chord or scale progression.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
We are going to start with a Fender amplifier. This Mustang I V2 is a 20-watt combo amp that has won over hearts of a lot of players because of its ease of use and versatility. With one channel that has 24 presets and eighteen amp models you won’t be scrambling for diversity. Apart from that, of course, you get some of the major controls like Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save, Exit and Tap Tempo. The size and price of this model really do not do it justice (I mean, don’t make it more pricey but still). You also will find that this amp features USB connectivity, chromatic tuner and black textured vinyl covering with silver grille cloth that accentuates the simple and elegant look of this model. While 20-watt, as you might know, is not much (unless it’s a tube amplifier) this baby is pretty great if you want it for practice.
I wanna weigh in, I’m just an average player but having one of the best luthiers around and talking to them really gives you an idea of what quality your getting from a guitar. I play a martin DC 16gte, my singer plays a Chinese knock off Taylor. No one can tell the difference when he switched to the real genuine 314 CE Taylor (basically made the same way as the Chinese one), and we get no complaints about either guitar. Save your money, (buy quality) or buy the Chinese knock off and find it’s made the same and it will make you the same money playing and feel just as good in your hand as the 1000 dollar plus Taylor. Conclusions for Taylor or martin fans is don’t go name brand cause they (known or unknown) swear by them, is all personal preference, try everything in every price range find what’s right for you. My $750 DC 16gte Martin was right for me. My singer the 914ce Taylor Chinese knock off (327 bucks new) suits him better than his 1200 dollar original Taylor 314ce.
Jackson is yet another brand among the best electric guitar brands satisfying the needs of metal players. In fact, around three decades ago, back in the ’80s, Jackson guitars were the favorite ones for all metal and hard rock players in the world. Even today, the legacy continues as we see these guitars trending among the fans. Notably, the models like Kelly, King V, Soloist, Dinky, and Rhoads still rule the realm of guitars for their outstanding performance and tone.
First Act is a very peculiar guitar company. They have guitars that sell at Toys R Us that will literally fall apart in your hands. They sell pedals that are a complete joke, leaving you with the impression that they must be a bad, bad joke. Then something strange happened, I did a little research and found some info that was stunning. First Act has a couple of guitar lines that are some of the finest guitars I have ever seen, heard, or even read about. They have guitars that go for $3000 plus and are better guitars than any person commenting on this board will ever have the opportunity of even being in the same room with (including myself) Who would have thought?! Go figure.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 42mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Earvana - Bridge Construction: Rosewood - Hardware: Chrome, Grover Tuners - Circuit Type: Active - String Instrument Finish: Brown Sunburst
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.
Compressor: Compressors make loud sounds quieter and quiet sounds louder by decreasing or "compressing" the dynamic range of an audio signal.[60] A compressor is often used to stabilize volume and smooth a note's "attack" by dampening its onset and amplifying its sustain. A compressor can also function as a limiter with extreme settings of its controls.[61]
Add to this the physical attributes and ergonomics of a .strandberg* that work together to relax muscles, joints and tendons when playing. Some players are freaked out by the low weight, others by the lack of headstock and some have a natural playing position that places their thumb right at the edge of the EndurNeck™ and is not comfortable at all.
A bass amplifier or "bass amp" is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. While bass amps share many features with the guitar amplifiers used for electric guitar, such as providing an amplifier with tone and volume controls and a carrying handle, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15" speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
When this guitar came in the headstock was completely broken off.  Being a 12 string I knew that it would need some extra reinforcement to stay structuraly sound.  I glued the headstock in place and then started to cut away wood from the truss rod to the edge of the neck running from the 5th fret to the A string tuner.  It took hours of cleaning up gluing surfaces and precisely fitting the graft before I could glue it in place.  I then repeated that step on the other side of the neck.  With this repair the only original wood remaing around the break is directly over the truss rods making the finished product basically as strong as a new neck.  Once the neck was refinished you cant even see the original break and only if you look very closely can you see the edges of the grafts.  When the owners of the guitar came to pick it up they thought I had made a whole new neck.  Needless to say they were very excited.  -Evan
"The Choice of Professional and Student Musicians Everywhere" This eight page catalogue was included as an insert in the 1963 annual "school music" issue of Downbeat magazine (September 1963). As well as keyboards and pedal steels, this catalog contains seven guitars, three basses and ten amplifiers - from student guitars such as the Musicmaster and Duotone to professional models like the new Jaguar.
The amplifier you choose to use will have a huge impact on the sound. Valve amps are still king for most players, but they can often be impractical in home recording scenarios. Though we’d all love to mic up a cranked Marshall Plexi every time a classic-rock sound is required, these days software and hardware modelling is so good that the results are almost indistinguishable from the ‘real thing’ in a finished mix. Though pricey, the Kemper Profiling Amp and Fractal Audio Axe-Fx produce seriously realistic results, while almost as impressive are software solutions such as IK Multimedia’s AmpliTube and Guitar Rig from Native Instruments. If you are recording on a Mac or iPad using GarageBand, don’t discount the built-in amp and pedal simulations either.

Rule 1 - There is a logical order for groups of effects. Some effects remove or add certain amount of frequencies, some change the basic shape of the audio waveform, and others react to the shape and amplitude of the waveform. Those are three main types of effects that logically can't come in any other order than they were just listed, or you end up with amateur results. The reason for that becomes clear in the next rules.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Ressort principal Butée Bloc de vibrato Tige d'arrêt Une fois la guitare correctement accordée, réglez le ressort principal pour faire en sorte que la tige d'arrêt soit en contact avec le bloc de vibrato et la butée. Si la tige d'arrêt n'est pas en contact avec le bloc de vibrato et la butée, réglez la vis de réglage du ressort principal jusqu'à...
In March 2008, Vox unveiled the semi-hollow Vox Virage DC (double cutaway) and SC (single cutaway) at the NAMM show. Notable characteristics include a 3D contoured ergonomic design which not only had an arch top, but also bent back from the neck toward the base of the guitar hugging the player's body. The guitar body was milled from a single block of wood and had a fitted face in combinations of mahogany and ash. A new triple coil pick-up system designed by DiMarzio called the Three-90 emulates a humbucker, P-90, or single-coil tone.
This is a very general question, but I will attempt to answer. I'll not get into brands, buy what "feels" right and has a good tone. If, a beginner, a good acoustic can be bought new for $200.00 - $300.00. If, you are an experienced or professional player, "The Sky is the Limit" only limited by how much you want to spend. My first guitar was used, and I paid $50.00. Now, I play a Gibson Song Writer, $3500.00. Hope this helps.
The term overdrive refers to when a tube amp is driven past its range to supply a clean tone. This is something we as guitar players have come to love and seek out. A common question is “what is the difference between overdrive, distortion, and fuzz as the terms have become interchangeable?” The short answer is not a lot, just one is more extreme as we go down the line.
Over 20 years, Ovation produced some very interesting guitars. Not only do the American models feature innovative technology that alone makes them worth seeking out, they really handle nicely as players, despite their rejection at the time. Some were ahead of their time. Most were out of step with it, as well. After two decades of failed attempts to market solidbody (and some hollowbody) electrics, Ovation did what other companies who failed to successfully cross over from the genres that brought them their fame. In ’88, Ovation purchased Hamer guitars. Ah, but that’s another story…
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
Of all of the variables available to a musician, from amps to instruments, the effects pedal is king.  They can offer a player the ability to change the tone and color of their sound in a way that can create unique sonic textures never before heard, or reproduce the traditional reliable tones of yesteryear.  Many players, like U2’s The Edge, use effects to carve out their own personal identity amongst the herd.

Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.
Again, as with the bridge saddle, too low of a bridge will decrease the "drive" of the strings. Thus the sound and tone will suffer. Also a low bridge is structurally not a good idea, as the bridge can more easily crack (and damage the top of the guitar). Most original Martin guitar bridges are about 3/8" tall (from bottom to the highest part of the bridge).
It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.
Overdrive distortion is the most well known of all distortions. Although there aren't many electronic differences between a distortion an overdrive, the main audible one is that a distortion does exactly as the name suggests; distorts and clips the signal no matter what volume is going through it, the amount of distortion usually remains relatively the same. This is where an overdrive differs. Most overdrives are built to emulate the sound of a tube amp overdriving and therefore give the player control of the clipping through dynamics. This simply means that the effect gives a clean sound for quieter volumes and a more clipped or distorted sound for louder volumes.
Another application of a fuzz pedal is available when the user has control over the the amount of feedback signal routed back into the transistor loop while the pedal is engaged. By configuring the feedback to more sensitive levels, the pedal will feed back into itself causing oscillation*. As the pedal oscillates, certain frequencies will be produced, causing a singing sustained note without the guitarist playing anything at all. The player can consequently play over the note produced to cancel out the feedback loop, but once the player stops the pedal will feed back into itself producing the configured signal once again.

Quirks? Some. The old Rola was kind of tired, so I saved it and put in a new Jensen Mod I had laying around (not a bad little speaker, but not a vintage Jensen, either…expect a future upgrade). The 7F7’s are supposed to be very loud and micro-phonic (which was why we don’t tend to see them in guitar amps after the mid-late 40’s), but this one sounds just fine. And they’re cheap, so it’s not like you’re hunting down good EL86’s or anything. Also, one thing that took some getting used to was the tone knob is backwards by contemporary standards. That is, turn the creamy chickenhead to the left, you get more treble (and more drive and volume). Turn to the right, and it gets very bassy and like a chewy jazzy tone.
This how-to guide will cover the aforementioned effects, as well as fundamentals like the function of typical delay controls, and where to place your unit in an effects chain. Although there are countless delays on the market—many of which have mind-boggling features—we’re going to use a basic delay pedal setup similar to what you’ll find on a Boss DD-7 as our reference point. We’ve also provided some sample settings so you can get the most out of your delay pedal right away.
Overstock SaleNew ProductsVacuum TubesSpeakersAccessoriesAmplifier PartsBooks & DVDsCapacitor Amplifier SetsCapacitorsCoversEffect Pedals & PartsEnclosuresFootswitch BoxesGift CertificateGrill Cloth, Tolex & PipingGuitar PartsHardwareJacks & PlugsKeyboard PartsKitsKnobsLuthier ToolsMaintenance ProductsPMT Tone ModsPotentiometersPower AccessoriesRadio & Antique Equipment PartsResistorsReverb TanksSemiconductorsSpeakersSwitchesT-shirts/GiftsTech SuppliesTerminal Boards & StripsTransformers & ChokesVacuum Tube AccessoriesVacuum Tube Amplifier SetsVacuum TubesYellow JacketsZero Glide Nuts
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
At least one other Teisco guitar was available from around this time in the ’50s, probably slightly later on � another mini Les Paul that was the ’50s piece de resistance, the J-5. The J-5 was a single-cutaway solidbody that went beyond the other more derivative LPs. This had a slightly elongated body shape, with less pronounced waist than a traditional Les Paul. The upper bass bout headed toward the neck with a more angular, almost pointed corner rather than the typical rounded shoulder. The cutaway horn was also more angular, heading out at almost a right angle to the neck. It’s impossible to tell from the photograph, but this looks to be a glued-in neck. The fingerboard was bound, and featured the typical large white dots with two small dots at the octave. The headstock was a white-faced asymmetrical affair, with a curved peak extending on the bass side, with a concave dip across the top. Tuners had white rectangular buttons. These would be interesting enough, but the body had a bound flamed maple top � flat, not carved. The pickguard followed the body profile, with an extension down the lower side for the volume and tone controls. On the black pickguard were two black-covered pickups, looking sort of like P-90s. Pickup selection was with a chicken-beak rotary three-way switch. Knobs were white knurled with silver top rings. The bridge was a typical adjustable wooden type. Again, a large tailpiece assembly allowed the strings to pass through the body. This is a very beautiful guitar.
I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.

The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
The strings fitted to the guitar also have an influence on tone. Rock musicians often[when?] prefer the lightest gauge of roundwound string, which is easier to bend, while jazz musicians go for heavier, flatwound strings, which have a rich, dark sound. Steel, nickel, and cobalt are common string materials, and each gives a slightly different tone color.