Body:  Soundboard:  two-piece spruce: medium grain broadening toward the flanks. Back: two-piece spruce: fine grain on bass side broadening to medium at the flank, wide grain on treble side; slightly arched; two f-holes; recessed 11 mm from edge of ribs. Ribs: 7-ply plywood, the outer layer birch, the inner layers mahogany, the outer veneer layer grain running perpendicular to plane of top and back; panel on bass side with nickel-plated steel plug; slides out for access to pickup unit. Head: mahogany veneered with white celluloid on both faces. Neck: mahogany; integral with head; rosewood stripe.
It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.
From rock to jazz or folk to metal, what separates the great guitarists from the rest is their mastery of the skills taught in this program. From basics like chords and scales to nuances like improvisation techniques, form, control, and inflexion, this certificate program will take your guitar playing to the next level. Few accomplished guitarists have reached their peak alone, and Berklee’s faculty is unparalleled when it comes to delivering the personalized instruction and feedback that will help you turn the fretboard into a playground packed with unlimited possibilities.
Around ’77 or so (since the new shape was similar to the Magnum basses), with sales embarrassingly bad, Ovation took some Deacon bodies and added new contours, carving a dip into the top curve and adding angles. It didn’t help. The Breadwinner was officially axed in ’79, with the Breadwinner loosing its head in ’80, although the market had long passed them by.
Every beginner guitarist deserves to learn on an instrument that's built by experienced craftsman who use only the finest materials. However, for many novice players, it's difficult to know for sure what's considered a high quality instrument. To make things easier, many popular guitar brands offer guitar value packages. These packages consist of all the essential pieces of equipment that a learning guitarist would use in the developmental stages of their playing. Within this section, you'll find more than enough guitar value package options to choose from.
As with drive tones, many guitar amplifiers will come with reverb built-in. As such, you may have an idea of the type of effect it is already. In pedal form though, there are companies taking things to new heights by embracing reverb as a gloriously creative tool in its own right. Not just something you add on as an afterthought. Strymon, the American pedal brand, are the masters of this as you’ll see in their Blue Sky (reviewed here) and Big Sky (reviewed here) pedals. Both offer a host of unique, interesting and quite incredible sounding reverbs which will alter your tone in all kinds of wonderful ways.
Launch price: $1,699 / £1,006 | Body: Laminated mahogany, semi-hollow | Neck: 3-piece mahogany/maple/mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x LB-1 humbuckers | Controls: Bridge volume, bridge tone, neck volume, neck tone, 3-way selector | Hardware: Guild Tune-o-matic bridge with rosewood base, Guild vibrato, Grover Sta-Tite open-gear 14:1 tuners | Left-handed: No | Finish: Cherry Red, White, Black
For the electronics, Martin went with a Fishman F1 system. This is a fairly straightforward platform that features a clear, transparent sound with plenty of authentic vibes, and a very simple control layout, which matters when you're in the middle of playing and need to tweak something. There's no EQs or anything extra like that. Instead, you get one volume control, one tone control, and a built-in tuner.

I though this list was BEST techniques, not hardest or most impressive. Vibratos bring music to life. You can create incredible solos without sweeping or tapping, but you’d be hard-pressed to find something that doesn’t use any kind of vibratos or string bending and still manages to sound good or “alive”. Of all techniques, vibrato is easily the most important to sounding good. Listen to the solo from “Tornado of Souls” by Megadeth. Proof that vibratos make music much better.
There was a time when Yamaha were thought of as just a guitar maker for students and beginners - but those days are long gone and Yamaha now produce quality acoustics that compete favorably with the best in this category. The LL16 is a great example, with it's all-solid wood body and built in pickups with preamp, this is a true workhorse instrument. Having premium level specs at mid-tier pricing is like a dream come true, the main reason why we consider the LL16 as the best value for money acoustic in this section.
I've played a Telecaster for years exclusively However i have tried playing a Les Paul and i remember thinkin how much easier it was to play. What guitar would you say was the easiest to play? I know it can be subjective but it seems to me that metal guitars are designed to play fast so they are made easier to hit notes etc. I'm guessing something like what steve Vai plays would be so easy and nice to play regardless of tone etc.
A Vibe or Univibe pedal reproduces the sound of a rotating speaker by synchronizing volume oscillation, frequency-specific volume oscillation, vibrato (pitch wavering), phase shifting, and chorusing in relation to a non-rotating speaker. The modulation speed can be ramped up or down, with separate speeds for the bass and treble frequencies, to simulate the sound of a rotating bass speaker and a rotating horn. This effect is simultaneously a volume-oriented effect, an equalization-oriented effect, and a time-based effect. Furthermore, this effect is typically related to chorus. Some vibe pedals also include an overdrive effect, which allows the performer to add "tube"-style distortion. This effect is the most closely related to a rotary speaker. Some Vibe-only pedals include:
The Fender T-Bucket 300 is a cutaway dreadnought guitar that comes with a stylish design and an incorporated pickup system for easy amplification. This instrument comes with a laminated maple top that features a Trans Cherry Burst finish. With quarter-sawn scalloped X-bracing, this guitar offers superior resonance and playability even as time goes by.
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.

(function(){"use strict";function s(e){return"function"==typeof e||"object"==typeof e&&null!==e}function a(e){return"function"==typeof e}function l(e){X=e}function u(e){G=e}function c(){return function(){r.nextTick(p)}}function f(){var e=0,n=new ne(p),t=document.createTextNode("");return n.observe(t,{characterData:!0}),function(){}}function d(){var e=new MessageChannel;return e.port1.onmessage=p,function(){e.port2.postMessage(0)}}function h(){return function(){setTimeout(p,1)}}function p(){for(var e=0;et.length)&&(n=t.length),n-=e.length;var r=t.indexOf(e,n);return-1!==r&&r===n}),String.prototype.startsWith||(String.prototype.startsWith=function(e,n){return n=n||0,this.substr(n,e.length)===e}),String.prototype.trim||(String.prototype.trim=function(){return this.replace(/^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g,"")}),String.prototype.includes||(String.prototype.includes=function(e,n){"use strict";return"number"!=typeof n&&(n=0),!(n+e.length>this.length)&&-1!==this.indexOf(e,n)})},"./shared/require-global.js":function(e,n,t){e.exports=t("./shared/require-shim.js")},"./shared/require-shim.js":function(e,n,t){var r=t("./shared/errors.js"),i=(this.window,!1),o=null,s=null,a=new Promise(function(e,n){o=e,s=n}),l=function(e){if(!l.hasModule(e)){var n=new Error('Cannot find module "'+e+'"');throw n.code="MODULE_NOT_FOUND",n}return t("./"+e+".js")};l.loadChunk=function(e){return a.then(function(){return"main"==e?t.e("main").then(function(e){t("./main.js")}.bind(null,t))["catch"](t.oe):"dev"==e?Promise.all([t.e("main"),t.e("dev")]).then(function(e){t("./shared/dev.js")}.bind(null,t))["catch"](t.oe):"internal"==e?Promise.all([t.e("main"),t.e("internal"),t.e("qtext2"),t.e("dev")]).then(function(e){t("./internal.js")}.bind(null,t))["catch"](t.oe):"ads_manager"==e?Promise.all([t.e("main"),t.e("ads_manager")]).then(function(e){undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined}.bind(null,t))["catch"](t.oe):"publisher_dashboard"==e?t.e("publisher_dashboard").then(function(e){undefined,undefined}.bind(null,t))["catch"](t.oe):"content_widgets"==e?Promise.all([t.e("main"),t.e("content_widgets")]).then(function(e){t("./content_widgets.iframe.js")}.bind(null,t))["catch"](t.oe):void 0})},l.whenReady=function(e,n){Promise.all({return l.loadChunk(e)})).then(function(){n()})},l.installPageProperties=function(e,n){window.Q.settings=e,window.Q.gating=n,i=!0,o()},l.assertPagePropertiesInstalled=function(){i||(s(),r.logJsError("installPageProperties","The install page properties promise was rejected in require-shim."))},l.prefetchAll=function(){t("./settings.js");Promise.all([t.e("main"),t.e("qtext2")]).then(function(){}.bind(null,t))["catch"](t.oe)},l.hasModule=function(e){return!!window.NODE_JS||t.m.hasOwnProperty("./"+e+".js")},l.execAll=function(){var e=Object.keys(t.m);try{for(var n=0;n=c?n():document.fonts.load(u(o,'"''"'),a).then(function(n){1<=n.length?e():setTimeout(t,25)},function(){n()})}t()});var w=new Promise(function(e,n){l=setTimeout(n,c)});Promise.race([w,m]).then(function(){clearTimeout(l),e(o)},function(){n(o)})}else t(function(){function t(){var n;(n=-1!=y&&-1!=g||-1!=y&&-1!=v||-1!=g&&-1!=v)&&((n=y!=g&&y!=v&&g!=v)||(null===f&&(n=/AppleWebKit\/([0-9]+)(?:\.([0-9]+))/.exec(window.navigator.userAgent),f=!!n&&(536>parseInt(n[1],10)||536===parseInt(n[1],10)&&11>=parseInt(n[2],10))),n=f&&(y==b&&g==b&&v==b||y==x&&g==x&&v==x||y==j&&g==j&&v==j)),n=!n),n&&(null!==_.parentNode&&_.parentNode.removeChild(_),clearTimeout(l),e(o))}function d(){if((new Date).getTime()-h>=c)null!==_.parentNode&&_.parentNode.removeChild(_),n(o);else{var e=document.hidden;!0!==e&&void 0!==e||(y=p.a.offsetWidth,g=m.a.offsetWidth,v=w.a.offsetWidth,t()),l=setTimeout(d,50)}}var p=new r(a),m=new r(a),w=new r(a),y=-1,g=-1,v=-1,b=-1,x=-1,j=-1,_=document.createElement("div");_.dir="ltr",i(p,u(o,"sans-serif")),i(m,u(o,"serif")),i(w,u(o,"monospace")),_.appendChild(p.a),_.appendChild(m.a),_.appendChild(w.a),document.body.appendChild(_),b=p.a.offsetWidth,x=m.a.offsetWidth,j=w.a.offsetWidth,d(),s(p,function(e){y=e,t()}),i(p,u(o,'"''",sans-serif')),s(m,function(e){g=e,t()}),i(m,u(o,'"''",serif')),s(w,function(e){v=e,t()}),i(w,u(o,'"''",monospace'))})})},void 0!==e?e.exports=a:(window.FontFaceObserver=a,window.FontFaceObserver.prototype.load=a.prototype.load)}()},"./third_party/tracekit.js":function(e,n){/**

The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.
The fact is, the qualities of different strings can have an effect on your guitar’s resonance and tone, on the quality and responsiveness of your attack as a plectrist or finger picker, and impact your speed and other important factors. And think about your budget. Some coated strings list at nearly $20, while a good basic set of electric guitar strings can be scored for $3 to $4 on sale.
Overall length is 28 1/2 in. (72.4 cm.), 10 in. (25.4 cm.) width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim. Scale length is 15 1/4 in. (387 mm.). Width of nut is 1 3/4 in. (44 mm.). All original and complete, and quite clean overall; there are a few small dings to the finish and some light checking-almost inevitable on the Eko-made Vox instruments. The only notable finish marring is one spot where a superglue repair to a cracked pickguard corner left a bit of residue behind. A very nice little player, with an awful lot of chime! Excellent - Condition.
ESP Guitars makes seven types, the Eclipse series, James Hetfield Truckster, and Kirk Hammett KH-3 from ESP, the LTD EC series and Truckster, the Edwards E-LP series, and the Navigator N-LP series, which are based on the Les Paul design. Certain EC models have 24-fret necks and active electronics using EMG pickups instead of the standard passive pickups and 22 frets found in the traditional Les Paul. The Edwards and Navigator lines are made in Japan, and available only on the Japanese market; they come standard with Gotoh hardware and Seymour Duncan pickups (EMG pickups in a few models), and unlike the EC and Eclipse series guitars, which are updated variants on the Les Paul, these are made to be as close to the Gibson 1959 Les Paul design as possible, in the vein of the late 1970s and 1980s “lawsuit” model guitars from Tokai, Burny, and Greco, complete with Gibson style headstocks.
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
The fit and finish are as amazing as one would expect, and the general aesthetics of the guitars are just awesome to look at. They aren't gaudy or try-hard, but refined and subtle in their expression. Strumming a single cord will tell you all you need to know about the tone quality of this guitar, which is what really matters. It has that Martin twang and a lot of it.
{"eVar4":"shop: books sheet music and media","eVar5":"shop: books sheet music and media: performance instruction","pageName":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media: performance instruction","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop: books sheet music and media","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitar method books","prop5":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","prop6":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods: guitar method books","prop3":"[gc] shop: books sheet music and media: performance instruction: method and instruction books","prop4":"[gc] shop: books sheet music and media: performance instruction: method and instruction books: guitar methods","campaign":"gcdirectsourcecode1","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category4"}
One important thing to keep in mind about effects pedals is that the signal is doing a lot of work going through the complex electronics in them, and some effects play better as inputs for others. This all means that the order of your pedals does matter to some degree, depending on which effects are in the lineup. You can, of course, experiment to see how different orders affect the sound and that can be part of creating your own signature effects profile. But as a rule of thumb, here’s the basic order you should follow for your first foray into effects chaining:
A. Yes, a number of guitar manufacturers produce student-size guitars, and parents can trade up for larger sizes as their child grows and progresses. Some older children may be able to use a traditional acoustic guitar if the body style is a good fit. There are also special rehearsal guitar “sticks” that simulate a fretboard but produce very little sound.
15 years ago a friend brought his in Miami i think. The guitar sounds amazing and the care for making it was awesome. The guitar have a cristal like sound and shines particulary well. Today i've acquire it from him by a fair trade: i purchased a new Falcon guitar, wich is the best brand here in Peru, and trade it for his Palmer. Is the best trade i've done. Not sure for him ;) My friend paid $100 for it 15 years ago and the model is PF20. Hope this information was helpfull
I know of two amp-and-effects modeling apps for the iPhone/iPod Touch/iPad, both of which are great and allow you to get realistic amp tones through your headphones. AmpKit and Amplitube both do a great job of simulating all the standard amp models and pedals, and they aren't very expensive. I use and prefer AmpKit myself, and between the app and the guitar-to-iPhone interface, I spent a total of $50.

Uh, Roland. I don’t know when was the last time I read about the best amplifiers and one of Roland’s models was not there. That’s not due to their ability to market their instruments to everyone (well, they are good at that too, probably) BUT the main reason why they are always a talk of the town (of a very musical and amplifier obsessed town) is their quality of production. With a lot of expensive amps, they are also graceful enough to give us the MERE MORTALS ability to bath in the glory of what is Roland tone. This CUBE‌-10GX amp is a 10-watt little combo amp with one 8 inch speaker that is ideal for home practice or anyone who needs an inexpensive model that will not ruin their performance. With built-in effects, heavy-duty cabinet design, and a compact construction the CUBE‌-10GX amp might be your best choice for a practice amp that also works as a traveling amp.

Rule 4—Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.
Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.
Jump up ^ Miller, Jim (1980). The Rolling Stone illustrated history of rock & roll. New York: Rolling Stone. ISBN 0-394-51322-3. Retrieved 5 July 2012. Black country bluesmen made raw, heavily amplified boogie records of their own, especially in Memphis, where guitarists like Joe Hill Louis, Willie Johnson (with the early Howlin' Wolf band) and Pat Hare (with Little Junior Parker) played driving rhythms and scorching, distorted solos that might be counted the distant ancestors of heavy metal.
As has already become apparent, the resonator instruments which made both the National and Dobro names in the late ’20s and ’30s were not the only effort underway to increase the volume of the guitar. The ampliphonics found immediate acceptance among Hawaiian players, notably Sol Hoopii, the very first to record with them when he used a prototype in his first session for Columbia on October 18, 1926. This was used on “Farewell Blues.” But they still didn’t satisfy the desire of orchestra guitarists to get out of the rhythm section. In addition to metal resonator cones, electricity was waiting in the wings, and National, Dobro and National Dobro would play a significant role, both directly and indirectly, in that ultimately triumphant development.
In the 1960s Japanese guitar makers started to mainly copy American guitar designs and Ibanez branded copies of Gibson, Fender and Rickenbacker models started to appear. This resulted in the so called Ibanez lawsuit period. After the lawsuit period Hoshino Gakki introduced Ibanez models that were not copies of the Gibson or Fender designs such as the Iceman and Roadster. The company has produced its own guitar designs ever since. The late 1980s and early 1990s were an important period for the Ibanez brand. Hoshino Gakki's relationship with Frank Zappa's former guitarist Steve Vai resulted in the introduction of the Ibanez JEM and the Ibanez Universe models and after the earlier successes of the Roadster and Iceman models in the late 1970s/early 1980s, Hoshino Gakki entered the superstrat market with the RG series which were a lower priced version of the Ibanez JEM model.

This site aims to be a reference point for guitar players and guitar collectors. There's information, history, photographs and sound clips of many famous, and not so famous guitars and basses by makes such as Danelectro, Epiphone, Fender, Gibson, Guild, Gretsch, Hagstrom, Harmony, Hofner, Rickenbacker and Vox. There is a section on effects pedals too!

Blend potentiometers are a popular modification to instruments with separate volume controls for pickups, no master volume and/or no pickup selector. For instance, on the Fender Jazz Bass, the dual volume controls can be replaced with blend and master volume controls, to allow the instrument's output level to be adjusted with just one knob while still retaining the various combinations of the two pickups blended together.
As auto wahs, envelope followers, and other dynamically controlled filter effects respond to your attack, you don’t want to limit dynamics with compressors and/or distortion pedals that reduce dynamic range. Most players also put wah pedals first in the signal chain—mostly to come before distortion effects—however Tom Morello is a notable exception.
Explorer-style guitars dropped off the radar after the mid 1980s, but were revived again under the influence of late Pantera guitarist Dimebag Darrell Abbott toward the end of the ’90s. Weird shapes were back, if anything can ever be said to be “back.” What goes around comes around. There’s clearly an algorithm going on that originated back in 1958!
Guitar Neck wood Fingerboard Blanks Electric guitar wood Burl Poplar 1pc Walnut Spalted Apple Burl poplar Spalted Maple Olive Spalted Walnut Burl Elm African Mahogany body wood Red Willow 1pc body blanks Plum Red Willow 2pc body blanks Spalted Birch Pear Mulberry Maple Acoustic / Classic guitar wood Flute and Oud blanks Pool Cue wood blanks & Wood Turning Gallery Sold examples Custom Wood Products Binding wood NEW! Gun Stock Blanks
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
Pickups are meant to capture (pick up) the strings' vibration. Now, the pickup closest to the neck captures the strings' vibrations at their highest amplitude, which results in a warm sound with lots of lows. Conversely, the pickup closest to the bridge captures the strings' vibrations at their lowest amplitude, rendering a bright and sharp sound. So, the same pickup will have a different sound depending on its position. That's why most guitars are equipped with several pickups.
Think of where you presently are in your journey as merely preparation and training. You are getting in shape to learn to play by developing some basic skills and building finger strength and callouses and coordination. Progress will be very slow in the beginning but if you persevere, you will reach a point where progress comes at a far more rapid pace.
In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.

In October 2017, Gibson announced plans to relocate its Memphis operations to a smaller location and plans to sell the Memphis property. Gibson opened its Memphis facility 18 years before, which occupies just a portion of a massive 127,620 square foot complex. According to the Memphis Daily News, Gibson plans to search for a new facility for its Memphis operations and will stay in the current spot for the next 18 to 24 months. The facility, which sits across from the FedExForum along South B.B. King Boulevard, is expected to list for $17 million.
If you stick to a simple chromatic scale (all the semitones), you also run the risk of the pitch correction moving the audio to the wrong note if the singer is more than half a semitone off pitch. A user scale, containing only the desired notes, generally works much better. Some systems also allow you to dictate the correct notes via MIDI. If the song contains sections in different keys or that use different scales, it is often simplest to split the vocal part across several tracks and then use a different pitch-corrector on every track, each one set to the appropriate scale for the section being processed.
Digital reverbs, like their sibling delays, offer more power and a greater variety of settings. And in addition to doing some approximations of spring reverb sounds, digital units usually offer more “lifelike” reverberation as heard in anything from an empty room to a large concert hall, if you want to add a synthesized “natural” room sound to your signal rather than merely replicate the classic sproing of springs. A few pedals do this very well, but most such devices are rack units that are best used in an amp’s FX loop, and are beyond the scope of this article. For all the power of digital reverbs, however, there are plenty of guitarists who just don’t warm to them, and the tube-driven, analog, spring reverb effect remains hands-down the favorite for guitar.

Fretwire can vary from some makers as it is shaped by extrusion thru a series of roller dies and the dies wear.  I have observed actual Dunlop 6105 in my shop varying from .088” to .090” wide and from .052” to .055” tall.  Due to the inconsistent size and tang formation, I generally do not use Dunlop fretwire these days, instead preferring the more accurate German made Jescar or the Japanese made Stewart McDonald fretwires.  Both Jescar and SM have very well formed tangs and barbs and are very consistent. I will refer to the Dunlop numbers below but only for very general description – always verify actual sizes!
What's so special about the Epiphone Les Paul Special II Electric Guitar? The super-low price for starters and that's not all. It gives you all the essential elements of a Les Paul. Made with a mahogany body, bolt-on mahogany neck, smooth 22-fret rosewood fingerboard, this baby is every bit as handsome as its uptown cousins. Features 700T/650R open-coil humbucking pickups that deliver long, singing sustain and true Les Paul tones. The LockTone Tune-O-Matic bridge and stopbar tailpiece add more sustain and make string changing easier. Limited lifetime warranty. Strings: D'Addario; 10, 13, 17, 26, 36, 46
The idea of what actually constitutes a “beginner” amp has changed over the years. Before playing electric guitar became such a widespread hobby, most guitarists had at least some aspirations of becoming a professional at some point. As a result, a good beginner amp needed to be capable enough for live performances and recording, in addition to practice.
Yeah there is no double about it the Epiphone Special 11 is unreal value for money and even though I have over the years filled my Den with guitars some worth a lot of money the Epiphone Special 11 is my go to guitar. I just cannot fault, great tuners, pickups and basically the only guitar I have that stays in tune 90% plus of the time. It is also the lightest of my guitar collection weighing in at about 5.5lbs. For $299 Australian they are an absolute steal. If I could only have one guitar I would go to this Epiphone Les Paul Special 11 ever time.
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
When the tone pot is set to its maximum resistance (e.g. 250kΩ), all of the frequencies (low and high) have a relatively high path of resistance to ground. As we reduce the resistance of the tone pot to 0Ω, the impedance of the capacitor has more of an impact and we gradually lose more high frequencies to ground through the tone circuit. If we use a higher value capacitor, we lose more high frequencies and get a darker, fatter sound than if we use a lower value.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
Hand built with the same precision as our larger guitars, just 25% smaller.  Great for travel, ideal for children struggling to get their arms around full size guitars, fantastic second guitar for the office.  Because it has a smaller box design our Travel will have a smaller sound (like any smaller guitar) but our Travel Electric with built in auto tuner allows you to plug into any amplifier or PA system giving you the same power as our full size guitars.
The first burst of interest in Explorer-style guitars in the 1970s, led by players such as Rick Derringer and Sammy Hagar, was followed by a hiatus at the end of the decade when guitarists followed an Alembic-style lead. However, natural-finished neck-through guitars with sophisticated electronics didn’t cut it with the heavy metal bands that became more popular in the early 1980s with the New Wave of British Heavy Metal and the subsequent American response, chiefly out of Los Angeles. Poofy hair and skin-tight spandex begged for guitars with in-your-face style. The radical Explorer shape was perfect for making the right kind of personal stage statement. Manufacturers jumped on the bandwagon. Baby Deans, Ibanez, Aria, Cort… Even Gibson offered Explorers in cool custom graphics.
THE BODY This is where your guitar starts to take shape. After you have finnished your design you will need to trace it onto the wood that you are going to use for the template or body. A solid blank of tonewood that you can get from online retailers like Catalina Guitars can run anywhere in the price range of $70 to $250 depending on what wood you use. Some people will tell you that different wood will produce a different tone. While this is true in some cases like the crisper higher pitch tone of Mapel and the warmer fuller tones of Mahogany, you probably won't be able to tell the differnce between using a lower grade wood versus a higher grade more expensive wood. The only time that I would splurge and buy expinsive wood is if I was going to use a clear finish on the body and all the other parts of the guitar were going to be high end quality parts. For my project I didn't have a lot of money, much less the expensive tools to work with to produce a result that I would want to break the bank on.
Wow! I have been playing guitar for forty years and this is the best guitar I have ever played for fingerpicking. The sound is marvelous, both using an amplifier or not. The quality of construction is beautiful. And, it is easy to play as well. You know when you play an instrument that is just right, and this guitar is one of them. And it is priced for anyone's budget.
Combos or extension cabs with more than one speaker might present some phasing issues when miked at a distance. Such phasing is usually heard as softness/“hollowness”/lack of low-end punch in the recorded sound – a sort of “comb filter” EQ effect like you get from a phaser or a cocked wah pedal. Some mic placements using, for example, a 2×12 speaker cab will induce time differences between the waves from one speaker hitting the mic relative to those of the other, and possibly create frequency cancellations that are deleterious to guitar tone. Even when both speakers are of the same make and model, they are likely to perform slightly differently (thanks to subtle variables of the manufacturing process) and to present ever-so-slightly different resonant frequencies, efficiencies, basic tonalities, and so forth. For all of these reasons, extra care is required when placing a microphone at a distance from any multi-speaker cab (close-miking one of the other speakers will all but eliminate such issues, but also eliminates access to the great sounds of distant miking).

A more successful early electric was the Ro-Pat-In "Frying Pan" guitar. This was played lap-steel style, and was the earliest I know of that uses something close to the magnetic pickups as they exist in modern guitars. This was conceptualized by George Beauchamp in 1931... he played Hawaiian style, thus the lap steel design. He met Adolph Rickenbacker and together the two worked out the details of the pickup system, and put this into production in 1932... the company name was eventually changed to "Rickenbacher".

Their are also guitars made with a "compound radius", which is a little rounder in the lower register, and a little flatter in the higher register. The true best of both worlds. Warmoth makes necks with a 10"-16" compound radius, as do some production guitar companies. I have a custom made guitar with a 16"-24" compound radius, and it's REALLY flat. Takes some time to get used to. It's breeze to rip on, but not nearly as comfortable to play rhythm on as my other guitars.
One thing is for sure: the advantage of a multi effects pedal is getting a lot of effects in one convenient package, which you can use to learn what guitar effects you actually use on a regular basis. Depending on the type of music you play, your style, and your skill level, chances are you don’t have a need for every effect type under the sun. Pro guitarists’ pedalboards are tailored to the tone and sound they need to achieve. Perhaps fuzz, delay, and compression are crucial, but not a flanger or chorus. Point is, if you don’t yet know this about yourself, a multi-effects pedal is the most perfect and cost effective way to start. Over time, if and when your love for effects deepens, as your budget allows you can start buying individual pedals that are better versions of what’s on your multi-fx unit. The overdrive in your Zoom G3X might be good enough to hold you over, but eventually you might want to get an actual Ibanez TS9 Tube Screamer.
Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.

{ "name": "Candy Apple Red", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Candy-Apple-Red-1500000152032.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152032", "shipToStore": true, "displaySku": "K47863000002000", "displayId": "1500000152032   POS #: 113861041", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Candy Apple Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.
Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.

Taylor’s 214ce Grand Auditorium acoustic guitar has undergone a few changes over the years. One of the latest improvements added in 2017 concerns the wood used for the body. Because of the restrictions on the importation of rosewood, Taylor no longer uses it for their 200 series of guitars, which the 214ce is a part of. Instead, the company used the next best wood for a great, balanced tonal response: Hawaiian koa.
Acoustic necks are usually listed as 12- or 14-fret necks. This number refers to the number of frets above the guitar body, not the total number of frets. On a 12-fret neck, the 13th and 14th frets will be on the body, and, thus, harder to reach than on a 14-fret neck, where they are extended beyond the guitar body. If you have small hands, look for an acoustic guitar with a smaller diameter neck.

In August ’68, Ovation added three more models – the Hurricane 12-string and the Typhoon I and II basses, all with chrome hardware. The K-1120 Hurricane was a Tornado with the extra strings, advertised as offering a “harpsichordian” effect. This lasted only a year and was gone by ’69. The initial Typhoon basses had slightly smaller bodies than the guitars, with stubbier, more flared horns. These lasted only a year until ’69, when the body styling changed to that of the Gibson-style guitars. The K-1140 Typhoon I bass had one Schaller pickup and a covered bridge/tailpiece assembly. The K-1240 Typhoon II was a two-pickup model with a three-way select. This was also called the Williwaw (“mountain wind”) in some Ovation literature, but it was never really called that. The Typhoon I was only available in the stubby body and was discontinued in ’69. The Typhoon II changed model number in March ’70, becoming the K-1222. This model made it until June ’72.

In the most commercially available and consumed pop and rock genres, electric guitars tend to dominate their acoustic cousins in both the recording studio and live venues, especially in the "harder" genres such as heavy metal and hard rock. However the acoustic guitar remains a popular choice in country, western and especially bluegrass music, and it is widely used in folk music. Even metal and hard rock guitarists play acoustic guitars for some ballads and for MTV unplugged acoustic performances.

Vintage Guitars has been around since 1985. We know what professional guitar players want. Our authentic guitars combine the classic design of vintage guitars with the modern playability of newer ones. The retro look is combined with patented new hardware that gives you the best of both new and old worlds. Whether your preferred genre is rock, country or jazz, we have vintage guitars for every working professional musician. If you’re looking for great features and old-school style, you’ve come to the right place. Check out all of our electric, acoustic and bass guitars!

A little bit of history will make this clearer… The original Fender Stratocaster switches were 2-pole 3-way switches (that’s actually what I have on my schematic, I think you’ll see why in a bit) and were intended only to select either the neck, middle or bridge pickup. However these were “make before break” switches where, as the switch is moved across from one position to the next, the next contact is made before the previous contact is broken. People found that if you could get the switch to rest in between those three positions that you’d actually have both neck and middle or middle and bridge pickups connected at the same time and, most importantly, it sounded good! It became a common thing to rest the 3-way switch in between the positions, so common that in the 60’s people were filing notches in the detente mechanism of the 3-way switch. These became the “notch” positions. In the 70’s, Fender adopted this popular mod into their stock switch thus becoming what we now use and call a 5-way switch but is, in fact, a 3-way switch with 5 positions.
Midlands trio The Bad Flowers make a concise, bruising power-blues that will appeal to fans of the likes of Jared James Nichols and Blues Pills, both of whom have offered TBF support slots. September single Thunder Child is the first shot fired from their forthcoming debut Starting Gun and packs an uproarious solo that leaves TG reaching for our wah pedal. Think Rory Gallagher through AC/DC’s amp stack and you’re near Tom’s bar-fight-scrapping lead sound.
In the fall of 1964, it's generally accepted that hide glue was replaced with white polyvinyl acetate PVA glue (Elmer's) after the move to the new Martin build facility. (But hide glue was still used until the mid-seventies for gluing tops to the rim and in some other situations.) A notation was written in Grant Remaley's personal memos on Sept 29, 1964 indicating Martin was starting to use "cold" glue. It is generally thought the type of glue used does affect the sound of the guitar. Starting some time in the 1980s Martin started switching from white glue to yellow aliphatic resin (titebond).
Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
Now, if you're just getting started and breaking strings every time you try to tune up because you hit the wrong octave, then start out with the cheapest strings.  Once you can reliably tune and play without destroying them, you can work you way up.  Once you have the hand coordination, your learning will be accelerated too.  The right tool for the right job, as Old Grandpappy always used to say.  The best electric guitar available will be garbage with the worst strings on the market.  Choose wisely!
My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!

The AEG10II combines laminated spruce top with mahogany back and sides, and packs both in a thin profile body. Thin bodied guitars, while more resistant to feedback than their larger counterparts, don’t have the breadth of tone or the volume of a full sized acoustic guitar. The cool thing about this guitar is that, it’s one of the cheapest ways for beginning musicians to get a solid gigging instrument.
Much of a B3's magic comes from good mic placement and the player (the right drawbar settings are game changers). EQ should be applied sparingly and mainly as a corrective measure. Usually it's good to look to anything clashing with the bass (80 to 180 Hz), and if it's feeling a little "chubby" in the middle and either can't get out of its own way or doesn't play nice with other mid-heavy instruments or guitars, look to make cuts somewhere between 300 to 500 Hz.
Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
Wes Borland (b. 1975) guitarist for Limp Bizkit has owned many Ibanez guitars, including a custom 4-string baritone guitar, although he no longer endorses them. He was mainly noted for playing an Ibanez RG7 CST which had selectable piezo and magnetic pickups, only 18 of these were made in 1999. Borland has a signature Yamaha guitar, but has been seen playing a Jackson with the reformed Limp Bizkit.

The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054.

Sooner or later you may want to experiment further: What happens if I use a different opamp here, or change a capacitor value there? Specifying your own components is the next step. Two of the specialty jobs in building a typical effects pedal are the design of the circuit itself, and the production of the printed circuit board (PCB) on which to install the components. The next logical step from a kit is to order a pre-built PCB and then customize the component and enclosure choices yourself. AMZ effects, is the go-to place for a huge variety of pre-designed PCB’s. The cost is quite low and the projects include clear documentation providing guidance on different options and components.

The earliest guitars used in jazz were acoustic, later superseded by a typical electric configuration of two humbucking pickups. In the 1990s, there was a resurgence of interest among jazz guitarists in acoustic archtop guitars with floating pickups. The original acoustic archtop guitars were designed to enhance volume: for that reason they were constructed for use with relatively heavy guitar strings. Even after electrification became the norm, jazz guitarists continued to fit strings of 0.012" gauge or heavier for reasons of tone, and also prefer flatwound strings. The characteristic arched top can be made of a solid piece of wood that is carved into the arched shape, or a piece of laminated wood (essentially a type of plywood) that is pressed into shape. Spruce is often used for tops, and maple for backs. Archtop guitars can be mass-produced, such as the Ibanez Artcore series, or handmade by luthiers such as Robert Benedetto.
 How to Order Custom Guitar: THIS IS A PRE-BUILD PRICING. You will receive the custom guitar exactly as pictured. Please make sure to choose the required options marked with the RED ( * ) asterisks and it will compute automatically the options you choose. We also offer Optional Upgrades but they are not required. And then once you hit on Buy Now button, go to the top most portion of the website and you can see a cart image logo and click on that then you can see VIEW CART and CHECKOUT to determine the total cost of the guitar including the shipping and the discount.
Smaller-scale instruments are produced to assist children in learning the instrument as the smaller scale leads to the frets being closer together, making it easier for smaller hands. The scale-size for the smaller guitars is usually in the range 484–578 mm (19.1–22.8 in), with an instrument length of 785–915 mm (30.9–36.0 in). Full-size instruments are sometimes referred to as 4/4, while the smaller sizes are 3/4, 1/2 or 1/4.
Other Ovation innovations include composite tops and multiple offset sound holes on guitar tops, pioneered in the Adamas model in 1977. Kaman Music has also sold budget guitars—and even mandolins and ukuleles—based on similar design principles to the Ovation such as the Korean-built Celebrity series and the Korean or Chinese-built Applause brand.[citation needed]

Altium is known for it’s high end PCB development application called Altium Designer which starts at around $7000 and there’s a yearly subscription fee too. Gulp! Altium Designer is used by many industry professionals for product development. Altium just recently released Circuit Maker, which has many of the features of Designer and is, Gasp!…. Completely free!  The trade off at this point seems to be that it’s designed around a community and apart from a couple of private slots, you have to share your work, so it’s not very useful for completely proprietary projects.
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
This Gibson Skylark Tweed has recently been totally overhauled. I will send the repair ticket dated 10/9/2018 with the amp. It states: Replaced transformer wired to spec. Tested tubes - good to new. Replaced all dead filter caps, installed terminal strips. Replaced power chord w/3 prong grounded plug. Replaced leaking coupling caps and bypass cap. Replaced cathode resistor. Cleaned and deoxidized jacks and pot. Replaced fuse. The speaker is not original but sounds fantastic. Don’t pass up this vintage jewel.
Besides the guitar just being fantastically sampled and recorded, Silk owes a lot of its realism to the controls in the upper right-hand corner on the main screen. Swing, Timing, Feel, and Variance can all be effortlessly adjusted and do a fantastic job of recreating that natural human touch or really the human flaw.  Timing is my favorite because the ebb and flow of the tempo between individually picked notes really reminds me of my own fingerpicking technique (or lack thereof).
A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies.  The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well.  This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.

{ "thumbImageID": "FA-135CE-Acoustic-Electric-Guitar-Natural/K37012000002000", "defaultDisplayName": "Fender FA-135CE Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000139262", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-Natural-1500000139262.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-Natural/K37012000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000139263", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-3-Color-Sunburst-1500000139263.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-3-Color-Sunburst/K37012000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000139260", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-Black-1500000139260.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-Black/K37012000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The remaining ’62 Teisco laps had a sort of paddle shape to the body, with sides wider than the fingerboard all the way up to the asymmetrical head with the circle Swan logo. The EG-A and EG-S had short scales and black fingerboards with the diamond markers, while the EG-U and EG-L had longer scales with fingerboards angled toward the bass side at the pickup. The EG-U had a light fingerboard with split-parallelogram markers, whereas the EG-L had a dark ‘board with dots. All were six-strings with one black-covered pickup and a little plate with volume and tone controls. Tuners mounted from behind the head as on a Spanish guitar.
If you’re recording or practicing at home, or you think your own amplifier sounds like garbage you’ll enjoy the Cab Sim switch. This when activated, causes your signal to simulate the sound of a mic'd up guitar cabinet rather than your direct amp signal, which is extremely useful when you want high quality recordings at home direct to a DAW, or you just can’t seem to make your amplifier sound good!
Now if this house is rocking, don’t bother knockin. Famous words by Stevie. Many people perhaps know him for Hendrix covers, but where Jimi left off Stevie continued, and continued he did. The elements of Hendrix were alive and plain to see in SRV, but with it, he also mixed in his own influences such as Albert King and his own soul to make it his sound a trademark spot on his songs. I vaguely remember a car commercial where I spotted Stevie’s playing (Pride and Joy) in a Nissan ad. That was much before I really got into Vaughan’s work. SRV was an artist who could play while absolutely stoned face. And when he did sober up, he actually played better. His newfound health and love for life and music are showcased on In Step his last album before his death a year later. Stevie’s footprints will always be in the air and in our hearts.

If the LR Baggs Venue is a little too expensive for your taste, the Acoustimax Sonic Maximizer preamp from BBE gives you a lot of the same controls at less than half the price. Like the Venue, the Acoustimax is ideally designed for the gigging or studio acoustic guitar player who wants to have more control over their tone and be able to adjust for different rooms and environments. BBE delivers this control with a five-band EQ, as well as feedback and frequency dials.

The VOX Pathfinder 10 is one of the best cheap amps on the market today, but don’t be fooled by its budget friendly price tag – this is a powerhouse of tone. Its pricing and ease of use makes it ideal for beginner guitarists but its signature, high quality VOX sound is why it’s also relied upon by professional guitarists and studio engineers everywhere.

The relationship between perceived volume (loudness) and power output in watts of an amplifier is not immediately obvious. While beginners sometimes assume that there is a linear relationship between perceived volume and wattage (e.g., beginners may think that a 50-watt amp will be much louder, or about ten times louder than a 5-watt amp), in fact the human ear perceives a 50-watt amplifier as only twice as loud as a 5-watt amplifier (which is a tenfold increase in power in watts). Doubling the power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural audio compressor at high volumes.
Neck of the guitar is bolt-on made from maple with a scarf joint for an angled back headstock. Which in turn increases the tension behind the nut eliminating the need for string trees or string retainer bars. Also on the neck are 24 jumbo frets placed on a rosewood fingerboard garnish by sharks fin inlays for the looks and performance of the guitar.

While it may sound like a good idea to place a booster pedal towards the front of your chain in order to send that added voltage out from the get go, some pedals can’t handle high levels of voltage which can cause feedback and other problems. Also, you don’t want to simply place it at the end as there is not much benefit in adding voltage when the signal has already lost much of its clarity. It would be like enlarging an already fuzzy picture when what you really want is to keep it from getting fuzzy in the first place.
The Ibanez GRX20ZBKN is part of the GIO series developed for players who want Ibanez quality in a more affordable package. The guitar is suitable for all types of music, but often a favorite of rock, metal and shred lovers. It features an alder body and a maple neck which feels sleek and fast. Great for moving quickly up and down the neck for those fast riffs and licks. A solid good looking low budget guitar for the beginner and intermediate.
I'm a beginning player and have felt intimidated in guitar shops. That changed after walking into Grumpy's on Saturday. I didn't feel uncomfortable at all, quite the opposite. Kevin did a complete se...tup on my electric guitar while explaining the process to me. Looked at my other two guitars and (surprisingly) let me know that they didn't need anything. Such honesty is rare these days and I greatly appreciate it. I'll be back for all my guitar needs in the future. PS My son is a professional musician and has nothing but good to say about Grumpy's as well. He's a drummer but he loves the shop as well. See More
Yamaha is one of those names that you don’t often see outside the realm of keyboards and digital pianos. While their footholds in fairly limited on the stringed instruments market, their quality is well known. Yamaha builds some of the most balanced and best performing electric guitars in their respective categories. That is simple the truth. Now, they might not be as popular as other brands, but that is a whole different story.
10. Behringer Ultracoustic ACX450 45-watt ($229.99): Not to leave our acoustic-centric players out of the list entirely, the Behringer Ultracoustic not only looks amazing, but it has a ton of features to keep you inspired and sounding great. Two channels are utilized so while you plug your acoustic into channel one, channel two allows you to input a microphone or another source. The FBQ Feedback Indicators allow you to control the feedback coming out of your amp by monitoring the LEDs on the graphic EQ. Need your own guitar effects? The ACX450 allows for 16 different presets on each channel, including delay and reverb. A great bargain for those looking to take their acoustic playing to the next level!
A Zoom G3X review is not complete without talking about the inclusion of a tuner and looper with built-in rhythm patterns. Just like all of this pedal’s functions, calling up the tuner is very easy; you just hold down the middle footswitch for a couple seconds. As we covered in our best looper pedal guide, a looper is an indispensable practice tool, and the fact that you get a pretty nice one in this unit is a huge plus in our book. The G3X gives you 40 seconds of loop time, which is ample time to record something interesting. You get 41 very basic drum patterns, and while they don’t sound amazing, it’s nice that they sync with the looper. Have a look at this 3 minute demo video of a performance using the looper and other Zoom G3X effects:

I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.

Slot Peghead vs. Solid Peghead (steel string models): Most models converted from a 12 fret slot peghead to a 14 fret solid peghead around 1934 (except the OM series, which went 14 fret in 1929/1930 and the style 17 and 18 models which were available in 14 fret style in 1932). Basically if the guitar has a 14 fret neck, it will have a solid peghead. If it has a 12 fret neck, it will have a slot peghead. Note there were some post-WW2 gut string and classical models (i.e. 0-16NY) and some post-WW2 special order steel string guitars (i.e. 1967-1993 D-18S) which always have a slotted peghead.
PONTE NON TREMOLO Per cambiare le corde, infilare le corde nuove negli occhielli di guida sul retro della chitarra e posizionarle in seguito sopra la selletta. È possibile regolare l'intonazione spostando la selletta in avanti o indietro utilizzando un cacciavite a testa Phillips (+) sulla vite di regolazione dell'intonazione nella parte posteriore del ponte.
Many players today have more than one overdrive/distortion stomp box on their pedal boards and sometimes use both at once. My personal preference is to place the lower gain pedals in front of the higher gain ones, but the opposite is absolutely fine if you prefer the sound of that configuration. Placing overdrive/distortion pedals later in the signal chain can increase noise as the noise of several effects chained together can add up, and any noise produced by other effects going into an overdrive/distortion effect will be boosted along with the guitar signal.
Effects are electronic devices and circuits that process the electronic signal input from an instrument or mic. Also referred to as FX, they run the gamut from limiter or expander settings so subtle you can barely detect them to sci-fi modulation effects so extreme that the original sound is virtually undetectable. Think of your guitar or bass as your artist’s palette of primary colors. Effects are the equivalent of your brushes, tools, and color-mixing skills that add near-limitless creativity to your artistic vision.

When discussing the science of tone, it’s safe to assume that we all know how electric guitars work. Pickups are electro-magnets that sense string vibrations and produce a signal that ultimately blares out of the amplifier. Of course, we all know that myriad other factors influence the sound, as well. Body shape, wood choice, string selection, pedal effects, rack effects, humidity, amount of people in the room, and the guitar player’s recent fight with his girlfriend are just some of the items that can alter a guitar tone from performance to performance.
On, "Sponsored Content" refers to articles, videos, or audio recordings that are produced or curated by an advertiser but that Premier Guitar is happy to share alongside our own editorial content due to the Sponsored Content’s educational, musical, or entertainment value. Sponsored Content is clearly labeled everywhere it appears, and Premier Guitar's editorial department has no involvement in its creation.
Tonhöhe ebenfalls gehoben und kann auf die gewünschte Tonlage eingestellt werden. Der Ibanez DOWNSHIFTER erlaubt es, die Tonlage einer Saite durch einfache Hebelbetätigung auf eine vorgegebene gewünschte Position zu senken. Um präzises Tuning für sowohl Auf- und Ab-Positionen zu erzielen, müssen Sie beide Hebeleinstellungen vor Betätigung des Downshifters voreinstellen.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
Ask anyone at all if they've heard of Ibanez, and you'll most likely get a 'yes'—even if it's not a guitarist or even a musician that you're asking. It takes a lot for an instrument maker to become as well-known outside the music community as it is inside, and Ibanez is one of the elite luthiers that has managed to do just that. How have they done it? Simple: by making instruments so sought-after that they can be found nearly everywhere. Originally founded in 1957, Ibanez is one of the "original" manufacturers from the formative decades of the electric guitar as we know it today. Ibanez was one of the first Japanese companies to break through to the international music industry as well as, even more impressively, the very first brand to mass-produce seven and eight-string guitars. That makes extended-range guitars an important part of the Ibanez legacy alongside their many classic 6-string models. Some of the most renowned Ibanez instruments include hollow body guitars like Pat Metheny's signature model, and distinctive solid body axes such as the Iceman and Fireman series. You'll also find a wide assortment of basses, including 5 and 6-string models that join the 7 and 8-string guitars in the extended-range Ibanez family. There are plenty of acoustic and acoustic-electric guitars and basses to choose from as well, not to mention mandolins, banjos and ukuleles. Ibanez has a prolific catalog that spans the whole guitar family, offering something for anybody who loves to work the strings. In addition to stringed instruments, Ibanez is also renowned for a broad range of effects pedals, amplifiers and accessories. The TS808 Tube Screamer, for example, is an effects pedal that's beyond legendary. The unmatched warmth and tone of its overdrive makes the TS808 a must-have item for countless guitarists. Connect it to an amplifier like the TSA30 Tube Screamer 1x12 Combo Amp, and you're rocking an amazing recipe for serious vintage sounds. Ibanez was an early player in the electric guitar game, and their instruments, pedals and amps are certain to be on stages the world over for decades to come. Make yourself one of the artists that takes Ibanez onstage at every gig and this gear will pay off in spades with the incredible sounds that made them an industry giant in the first place.

The Broadway by Epiphone features a laminated maple body with a select spruce top, producing a bright sound rounded up by the warmer tone of the spruce. It also has a hard maple neck with a Slim Taper C profile, a rosewood fingerboard with block-and-triangle abalone inlays, binding on the headstock, body, fingerboard and around the F-holes, a mother-of-pearl Tree of Life inlay on the headstock, gold hardware, a three-way pickup selector and an adjustable floating tremolo bridge.
In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."
: I have a Vox Shadow that's sunburst, white pick guard that surrounds 3 solid chrome face pickups and the middle pick up has "VOX" engraved in it. 3 seperate volume controls and a master volume control. Tuning keys are all chrome, and the green decal on the face of the headstock reads Shadow, JMI Dartford, Kent. Neck is attached withthe help of a chrome plate, on the back side of the 'plank' body is an access plate for the jack that states made in England. Guitar also has the original roller/tremelo tail piece with palm lever. The numbers of 64728 are stamped on the back side of the headstock just below the tuning keys. Finish is beginning to crack a bit but it's all original, right down to the volume pots that have to be cleaned from time to time. It must be a rather unknown line that Vox had as I can't find out much on it either. Had this guitar for many years. Was handed to me in pieces in an old 'cardboard' case, (that has since gone away) put it back together and added it to my "music room".
We supply different variants of Electric Bass Guitar, which is just an extension of the Electric Guitar. The only difference between the two is that the former comes with a longer neck and scale length. It also comes with an option of 4, 5 and 6 strings. The four string bass guitar is tuned in a way similar to tuning a double bass guitar. It is capable of
Also new in ’66 was the SM series, a variation on the E-100 and ET-100 introduced in the previous year, very similar to the Ks except the cutaway horns were flared outward in the classic Teisco “tulip” shape which would dominate later in the decade. These had fairly flat rectangular chrome-covered pickups, with a rectangular indentation stamped in the center and six flat round poles, plus to long half-slots along both outer edges. The SM-2L (Teisco Del Rey ET-210) had the hooked headstock, small striped metal pickguard along the lower body, two on/off sliders, volume, tone, roller bridge and Bigsby-style vibrato. The SM-2L retained the German carve relief of the K series. A plain-Jane SM-2 (Teisco Del Rey ET-200) followed, sans German carve, and with a bridge/tailpiece assembly. The SM-1 (Teisco Del Rey ET-110) had just a neck pickup with volume and tone controls, bridge/tailpiece assembly, no German carve or striped metal pickguard, and the Strat-style head of the previous ET-100.
Gold models had single coil pickups with clear silver plastic covers and phillips head bolt adjustable pole pieces. The Upbeat model came with an optional transparent black plastic cover. These pickups appeared on Kay instruments through the late 1960s and are sometimes called “Kessel” or “Kleenex Box” pickups.[citation needed] The Jazz Special Bass has a single blade pickup as used on the K-161 and K-162 (tilted slightly towards the neck at the treble side), as well as a distinctive, oversized headstock.
We've already heard the story of Muddy's rise from a Mississippi planation to a Chicago blues legend but that only took his career so far, at least in his chosen style of music. Eventually, bands that were influenced by Muddy like the Rolling Stones (named after one of his songs), Animals, Yardbirds, Cream and Hendrix became big, raising Muddy's profile but not getting him the same level of success his descendants were having. Marshall Chess, son of the president of the label who worked at the company had the idea to try something different by putting Muddy's music into a psychedelic setting to appeal to a younger audience. After discussing the project with Muddy, he went for it. He wasn't forced into it as some have been led to believe.
That’s what this book is about and it delivers in spades. It sharpens your will to learn and how to set goals rather than your actual technique. If you need to reinvigorate your desire to learn and find the importance of why you are learning in the first place, this book that will apply Zen lessons to the art of learning guitar in a way that is very motivational (but not in a shove spiritual dogma in your face kind of way). If that is what you are looking for in a guitar book, it is hard to beat Zen Guitar.
For an overdrive pedal, turn your attention to the Fulltone OCD Obsessive Compulsive Drive Overdrive Guitar Effects Pedal. Compact yet versatile, this pedal is great for anyone who likes a raw vintage-like overdrive, and it even makes a great boost pedal. Now, if it's a distortion pedal that you're after, take a closer look at the Electro-Harmonix Classics USA Big Muff Pi Distortion/Sustainer Guitar Effects Pedal. The Big Muff Pi is a legendary pedal in itself, and this reissue has 3 controls that let you dial in the finest harmonic distortion/sustain ever produced. From warm bass to crisp treble, you'll be blown away by what this distortion pedal can do for your hard-rocking guitar performance.
Inspirational, motivational and light background tune with beautiful and atmospheric melody. Good production audio for the slideshow, presentation, youtube, advertising, business project, motivational and successful videos, inspiring moments, bright achievements, film scores. I used electric guitar, muted guitar, piano, staccato strings, bass, drums, Glock, bright pads.
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.

Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
Mostly everything about a guitar in this price range feels premium, and the sound quality and playability is enough to put a smile on any guitarist’s face. You also start to find advanced features such as brand-name pickups, active pickups, and EverTune bridges, as well as unique signature models that are too expensive for manufacturers to produce as a budget line.
So there you have five good beginner’s guitars. Bear in mind that while the quality of these instruments is good—it’s a fiercely competitive area—they’re at the bottom of the market. You get what you pay for (as they say). At the same time, “cheap” guitars like these have come a long way in the last ten years and they’re excellent for starting out, before deciding to mortgage your house on that expensive vintage Fender or Les Paul Gibson mentioned earlier.

The offset waist guitar was a later development in guitar history.  Getting away from the straight-laced and semi-symmetrical “T” and “S,” the Jazz Style was a whole new animal. A complicated electrical circuit provides much more variance and tone that its straight-waisted brethren.  This style of guitar is one of the most unique and complex guitar designs out there and has graced the shoulders of artists such as Elvis Costello, J. Mascis, Thurston Moore, and many more.
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?

I have 8 guitars and 5 Gretsches and I'm currently playing this one the most. It's very bright, which if you play a Martin you might not like. Like super duper bright. No really, brighter than that. But I like it. Unplugged it's good but not very loud, so it's a nice practice guitar, but you're going to want to plug in at the coffee shop or larger.

Although it’s a minor issue when choosing your first guitar, the tone and sustain that the guitar can produce relies on the quality of the material it’s made from. The most used tonewoods in the budget range are basswood, poplar, alder, and paulownia, while more expensive guitars can be made from pine, mahogany, and swamp ash. This is just a rough rule though – these days you will find mahogany in budget guitars and basswood in premium models. They all have different tonal qualities – for example, mahogany typically offers a warmer sound, swamp ash is brighter, while basswood and alder are well-balanced.
If you see a "\n/," where n = some number, perform a tremolo bar dip. Quickly hit and release the bar to dip the note's pitch. The number between the slashes gives an indication of the pitch you should dip to - dip the pitch by "n" semitones (a semitone is the same as the pitch between two adjacent frets.)[1] For instance, "\5/" means to drop the pitch by 5 semitones, which will be the same tone as 5 frets below the original note.
Overdrive – A dynamic effect that sounds like your guitar tone is being played through an amp breaking up. Overdrives are more subtle than distortion effects. To achieve the original overdrive effect, a valve or vacuum tube amplifier would be “overdriven” by increasing the gain to the limits of the tubes. At this point, the vacuum tube can’t handle the voltage, starts “breaking up”, and adding extra overtones to the signal giving the sound distortion.
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.

Based on Mesa's flagship Mark V, the Mark Five: 25 head is small, perfectly formed and typical of Mesa's superlative design and attention to detail. Two independent channels, each with three very different voice presets, combine with Mesa's iconic five-band graphic EQ for a choice of 12 sounds. You can footswitch between the channels, with the graphic on or off for quasi four-channel operation and preset 25 or 10 watts per channel. One of the best features lives on the back panel: a CabClone speaker-emulated direct output, with a speaker defeat for silent recording or practice, using the built-in headphone socket. Despite the Mark Five: 25's long feature list, it's very easy to use and its tones are sensational. The rhythm channel covers the shimmering clean tones of the modern Boogie and the fatter 'blackface'-inspired midrange of the fabled Mark I, while the Mark V crunch voice is so deep and three-dimensional you could record an entire album with it. The lead channel is equally inspiring, with a perfect rendition of the Mark IIC's overdrive tone (arguably the most coveted Boogie sound), along with more modern distortion effects that sound unbelievably good when tweaked with the graphic. The Mark Five: 25 is one of the best small Boogies we've ever heard, which means it's one of the best small amps there is.
Effects built into guitar amplifiers were the first effects that musicians used regularly outside the studio. From the late 1940s onward, the Gibson Guitar Corp. began including vibrato circuits in combo amplifiers. The 1950 Ray Butts EchoSonic amp was the first to feature the spring reverb "echo" sound,[citation needed] which quickly became popular with guitarists such as Chet Atkins, Carl Perkins, Scotty Moore, Luther Perkins, and Roy Orbison.[citation needed] By the 1950s, tremolo, vibrato and reverb were available as built-in effects on many guitar amplifiers.[citation needed] Both Premier and Gibson built tube-powered amps with spring reverb. Fender began manufacturing the tremolo amps Tremolux in 1955 and Vibrolux in 1956.[28]
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.

A wah-wah pedal is a moving bandpass filter whose frequency center is controlled by the musician via a rocker pedal. This filter boosts the frequencies in the instrument signal around the moving frequency center, allowing the musician to emphasize different areas of the frequency spectrum while playing. Rocked to the bass end of the spectrum, a wah-wah pedal makes a guitar signal sound hollow, without upper harmonics. On the other end of the sweep, the filter emphasizes higher-end harmonics and omits some of the low-end "growl" of the natural instrument sound. Rocking the pedal while holding a note creates a sound that goes from growl to shriek, and sounds like a crying baby, which is how the effect got its name and also the reason behind the Crybaby line of wah-wah pedals. The wah-wah pedal, used with guitar, is most associated with 1960s psychedelic rock and 1970s funk. During this period wah-wah pedals often incorporated a fuzzbox to process the sound before the wah-wah circuit, the combination producing a dramatic effect known as fuzz-wah.

Reverb is the persistence of sound in a particular space after the original sound is removed. When sound is produced in a space, a large number of echoes build up and then slowly decay as the sound is absorbed by the walls and air, creating reverberation, or reverb. A plate reverb system uses an electromechanical transducer (actuator), similar to the driver in a loudspeaker, to create vibration in a plate of sheet metal. A pickup captures the vibrations as they bounce across the plate, and the result is output as an audio signal. A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. Guitar amplifiers frequently incorporate spring reverbs due to their compact construction. Spring reverberators were once widely used in semi-professional recording due to their modest cost and small size. Due to quality problems and improved digital reverb units, spring reverberators are declining rapidly in use. Digital reverb units use various signal processing algorithms in order to create the reverb effect. Since reverberation is essentially caused by a very large number of echoes, simple DSPs use multiple feedback delay circuits to create a large, decaying series of echoes that die out over time.
It has always amused me that one of the great tempests in the teapot of guitardom has been the legendary “lawsuit” of the 1970s. You know, when Norlin (aka Gibson) sued Elger (aka Hoshino, aka Ibanez) in 1977 over trademark infringement based upon “copying” Gibson’s headstock design. There are tons of ironies in this story, but one of the most amusing aspects is that companies such as Gibson have been one of the most egregious copyists of its own guitars over the years. Witness the Korean-made Epiphone Firebird 500 seen here.
“But I was recently talking to a guy at Yamaha who told me the total global revenue from musical equipment sales sold round the world doesn’t add up to one-thousandth of Apple’s AAPL, -1.42%   daily turnover. It’s a small specialist market,” Hook said. “Gibson guitars are expensive and they have been taken over by so many cheap copies. That’s what has caused a lot of harm to such a luxury product.”
If you know that you want to use your mini amp to reduce the audio footprint of your jam sessions as much as possible, you’ll pretty much have your pick of the litter among miniature models. That’s because even the most powerful of these amps can produce viable tone at a very low volume, as manufacturers know that this demographic needs the ability to play quietly. If you want to maintain a certain degree of audio fidelity and flexibility, you might need to aim for one of the slightly larger mini amps out there. Models with at least five, and preferably 10 watts will be the best for generating a realistic and presentable guitar tone. Some of these are even nice enough that you could use them to perform at any venue capable of miking the amp itself.

The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
Why We Liked It - If you’re looking for an electric acoustic guitar that’s just great all round, and doesn’t have a large price tag, then this Yamaha has to come into consideration. It has all of the construction features you’d expect from a solid mid-range choice, with the addition of quality hardware, and nice touches like the scalloped x-braces. For those interested in Yamahas FG series, can always look at the alternative products, the yamaha FGX700SC.
While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.
I think jackson (particularly the USA models) are truly the most versatile of all the high end electric guitars. The build quality is second to none as they are made at the custom shop by very experienced luthiers, the woods used are exotic and tonally superb. The hardware is the best around Floyd rose/ Seymour Duncan's and the action/playability is fantastic. All in all you feel although expensive, you feel like you're getting your monies worth. But the great thing is that they produce an incredible array of sounds which covers all aspects of musical style from the beefed up classic grind of a Gibson, to the stringy percussive violin sounds of a start and everything in between. The USA ones are expensive but I have 2 (an sl 1 and sl 2) and given the enjoyment and reliability they have given me, they owe me nothing.
Large-diaphragm models are popular, with Neumann mics particularly favoured. The famous U87 studio workhorse is probably the most commonly mentioned, but it's by no means the only contender. Eddie Kramer, Steve Albini and John Leckie single out its predecessor, the U67, for example, while both of the earlier U47 models (valve and FET) receive name checks from people such as Steven Street, Glenn Kolotkin, Butch Vig and Bruce Botnick (note that U47s were marketed under both Neumann and Telefunken brand-names, but they're essentially the same mics). Neumann aren't the only game in town, though: AKG's C414B-ULS is probably joint most popular large-diaphragm model alongside the U87.
The four fingers of the left hand (which stop the strings) are designated 1 = index, 2 = major, 3 = ring finger, 4 = little finger; 0 designates an open string, that is a string that is not stopped by a finger of the left hand and whose full length thus vibrates when plucked. On the classical guitar thumb of the left hand is never used to stop strings from above (as is done on the electric guitar): the neck of a classical guitar is too wide and the normal position of the thumb used in classical guitar technique do not make that possible.
Among the favorite brands of Gretsch lie the signature variants Brian Setzer and Chet Atkins models. Whereas, its Jet and Duo Jet are equally worthy. All these models are aimed explicitly at Jazz. In fact, you can think of them for Jazz as what you call Jackson for metal. For intermediate and pro players looking for affordability, its Electromatic Series is the desired option.

These pedals are different, but are both based on the same idea. Pitch shifters shift the whole pitch of your guitar up or down by a set amount (often an octave), giving you a higher or lower tone than would normally be possible. Jack white uses a Whammy pitch shifter in the solo for Seven Nation Army, which has a foot pedal that rocks back and forth (similar to a wah pedal) allowing you to go up and down a full octave or more smoothly and quickly.
Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:
When I first hooked it up, I was annoyed. It took maybe two days to get used to the colors flying at me and what color is what string. I also found it odd that there was no timing indication with the notes (is it a quarter note, or a half note?, gradually, I've learned to tell by the spacing), which is especially akward in the beginning when you only play occasional notes in the song. I 've also found (as have most people I've played it with), that for whatever reason, we tend to miss seeing the blue notes (4th string) a lot (tends to blend into the background) and to a lesser extent the orange notes (3rd string).
When you’re just getting into the electric guitar, there are a lot of items you’ll need to get going. This includes the guitar itself, tuners, straps, an amp, a bag or protective case, a stand, etc. Buying it all piece by piece can be rather expensive. It’s much more practical in financial terms to opt into one of the many starter packs on the market. If you want to know which ones are worth your time, here are the 8 best guitar starter packs for beginners:
Another option would be to instead buy a mobile guitar interface and download one of the many guitar apps available, but I typically don’t recommend this for beginners. These apps are very robust, and can be a little overwhelming for someone just starting out. First learn how the controls on a real amp affect your tone. Once you’ve grasped these basics (and acquired some basic guitar skills), you can think about buying some fancy apps and effects.

My father's Yamaha was bought in the 90's, and was the first guitar steel-string I ever played as a kid. (If you were curious its equivalent to today's model would be the LS6 ARE). To this day I still find myself going back to it. It's little quirks makes it really special, even though I have martins and taylors and even gibsons. There's little nicks and chips in the paint in some places, which really shows it's history. It's also stood the test of time. It still plays great after almost 30 years of being lugged around from place to place, dropped, hit against walls, etc. It's just simply great. - zabathy1
It depends on what you call important. Does an electric guitar's tonewood affect the tone? No. Sorry. When the thing capturing the sound is directly under the thing generating the sound and, it makes no sense for the wood, which vibrates in a secondary fashion, to have any effect on a tone that has already left the guitar. Think of it in layers, like this:
Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
Hi Dan! Thanks for the kind words! As somewhat of a newbie, you may find a semi-hollow-body guitar more flexible and versatile, especially if you are still finding trying to figure out what genre you are going to focus on. If you are set on the hollow-body go for, but ,if you are on the fence, the versatility of the guitar is something to consider. Those are my thoughts. Good luck!

Greetings from Adam Reiver! Welcome to the new FU-Tone website! (Formerly FU does so much more than upgrade parts for "Floyds" and FU just seems so fitting for the circumstances of the name change! I have been working on improving tone with the greatest guitarplayers in the world for the last 25 years. I have found out what works and what does not... I am happy to share this with you. Tone is selective! FU is dedicated to help you find what is best for YOU! Using the best materials available, FU manufactures the ultimate in high performance guitar parts used by the PROS! Obviously, FU specializes in locking tremolo parts but if you dig around the site you will find upgrades for your Strat, Les Paul, Tele, Acoustic and more. In my dedicated effort to bring you the best of the best, I will continue to design and manufacture new FU products as well as bringing in other items that I think are cool. Check back often, feel free to ask me questions and keep chasing TONE!
I am old enough to remember Kay guitars back in the 70's. And what I remember of playing them is they were poorly put together, poor action (like mile high action), poor sounding pickups etc...They also seemed to always be the guitars that were the cheapest in all the mom n' pop stores, and the ones that were just sold to students, if they were sold at all. In other words,
Note: as of November 2004, the serial number represents not necessarily the year the instrument was produced but rather the model year to which the instrument belongs. It has long been Ibanez's practice to begin production for the subsequent model year in November (or even late October), but the serial numbering change that was implemented in November 2004 acknowledged and formalized this practice.
Description: Body: Mahogany - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Carved - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Richlite (Paper/Phenolic Resin Composite) - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Resomax - Cutaway: Single - Hardware: Godin Tuner, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Seymour Duncan - Pickup Configuration: H-H - String Instrument Finish: High Gloss Cherryburst, Creme Brulee, Black, Burgundy

i really liked it! especially since it goes over standard musical notation, which hasn't been considered a conerstone for electric guitar players, but i think, like the author says "it a skill you'll never regret learning". the reason it didn't get 5 stars is because the book states that it will start from zero as for standard musical notation, but it doesn't, it assumes a bit of knowledge and it advances at a perfect rate for some who has already a notion of standard musical notation, but not for someone who doesn't have a clue a buys this book to go from zero-to-master such ability.
It’s interesting to note that luthier Steve Klein introduced a guitar that got a lot of press in the early ’80s with a body virtually identical to the Ovation Breadwinner. According to Charles’ son (and future president of Kaman Corporation), Bill Kaman, Jr., Ovation considered “pointing this out” (i.e., legal action), but given its bad track record with solidbodies, figured it wasn’t worth the effort.
With that budget you can look about anywhere you choose. Try epiphone, maybe a boutique builder along the lines of your ideal, even a good kit that you rough in and take to a great tech/Luthier to trim finish….but about the Gibson…play em yourself, don’t get upset by a bunch of rumbling that’s largely bad noise. What your hearing is chatter largely perpetuated by their competition. They had a rough patch when they had ALL their imported wood jerked out from under them do to a screw-up of paperwork, wouldn’t at all surprise me if the government changed the rules and didn’t tell anybody(again). You can imagine what Gibson had to do to stay afloat, compromise was inevitable. I’m sure they more than anyone regret that, but you know everyone else in the industry was plenty happy to keep the scuttlebutt going, they ALL hate you when you’re on top. She. I was with strings and things of Memphis, Gibson came out of packing set up beautifully, usually perfectly in tune or nigh on to it. No other maker came close at all. By the way , I’m not a Gibson guy, the only one I’ve had is for sale, I prefer a more modern platform, that’s just my preference. But I still have to give props where they’re due…say, if your interested in an SG ’67 reissue at a good price, hit me up. I’ll give you the skinny on it, all right and wrong, and beat the brakes off any price from a shop!

Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
If you do want to use single pedals then BOSS compact pedals come with a buffer circuit that converts your high impedance input into a low impedance output. For a more detailed discussion on the topic of single pedal buffers check out Steve Henderson’s excellent article here:

Remember when I said that there were 2 amps widely used as practice amps and tools for guitar tech’s? Well, the Orange Micro Crush Mini Guitar Amplifier Combo is the other one. Warm ups before gigs, during set ups and maintenance work, this amplifier is relied upon to provide accurate sound and incredible tone anywhere, anytime. This is one of the best cheap amps available thanks to the fact it’s made by one of the most respected amplifier manufacturers in the world, powered via 9V battery and busts out some seriously amazing clean and dirty sounds.

With an entire industry surviving off musicians’ insatiable desire for the ultimate guitar tone, it seems obvious that some company would have cracked the code for the greatness. After all, corporate chain restaurants can quantify that if they use X of fat, Y of salt, and Z of sweet in their latest enormo-burger, then consumers across the country will salivate. Unfortunately, it’s not that simple with music.
If straightforward lessons aren't what you're looking for, fear not: Rocksmith 2014 tries to refresh your picking skills through games that veer into the ridiculous. I tried out Return to Castle Chordead, which revels in delightfully bad NES-style graphics (the game challenges the player to zap the hungry undead by playing the correct chords). Scales Racer—which, you guessed it, teaches the major and minor scales—puts the player in a car fleeing the police. Pick the right notes and you zip between lanes, eluding the fuzz.
Look for lyrics or chord changes. Many songs have guitar parts made up solely (or mostly) of chords. This is especially true for rhythm guitar parts. In this case, the tab may forgo typical tab notation in favor of a simplified list of chord changes. These chords are almost always written in standard chord notation (Amin = A minor, E7 = E dominant 7, etc.) Simply play the chords in the order that they're listed - if it's not noted otherwise, try playing one chord per measure, but if the changes don't sound right, listen to the song for the strumming pattern.
I agree that you should spend more on the guitar than the amp, but if you have a nice guitar and a cheap amp, you aren't giving the guitar enough width and breadth of tone capabilities to warrant spending $1500 or more on a guitar. So, if you're going to spend over $1200 on a guitar, don't buy a lousy amp. A Peavy 30 is a decent amp, but is short on breadth of tone as compared to a Fender Deluxe Reverb 22 watt. Marrying the guitar and amp is an important part of the process, they are symbiotic. My advice, as a player for over 40 years is to buy as good a guitar as you can. For beginners, a bad guitar will not get you playing, in fact, the most common reason young novices stop taking lessons is that the cheap junker they got is unplayable, even by professionals. It's hard, not fun, seems like a world of work and they quit. That's not how it's supposed to be. It's a fun thing, so get out there, get a good playable instrument and you are on your way to a lifetime of good times.

It should be noted that some bridge assemblies have pre-set, non-adjustable saddle pieces. The Gibson "tune-o-matic" bridge is just one example. On these bridges you will have an overall height adjustment post on either side of the bridge. For these bridges, measure the height at the 12th fret for the low and high "E" strings and make your height adjustment for each side at the respective post. The other string heights will be defined by the bridge assembly.
The ghost Hexpander MIDI interface system adds MIDI capability to almost any guitar or bass.  Plug your guitar into pitch-to-MIDI converters by Roland or Axon and enter the MIDI sound universe.  The Hexpander MIDI interface provides responsive and accurate tracking unequaled be any other system on the market today.  Check out how affordable and easy it can be to make MIDI part of your music making.
The open strings of a guitar can be tuned to microtonal intervals, however microtonal scales cannot easily be played on a conventional guitar because the frets only allow for a chromatic scale of twelve equally spaced pitches, each a semitone apart. (Certain microtonal scales, particularly quarter tones, can be played on a standard guitar solely by adjusting tunings, but the distance between notes on the scale makes it somewhat impractical.) It is possible to play microtonal scales on a fretless guitar, to convert a fretted guitar into a fretless, or to make a custom neck with a specific microtonal fret spacing.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: kent","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"kent","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
The type of potentiometer you should use will depend on the type of circuit you are designing for. Typically, for audio circuits the audio taper potentiometer is used. This is because the audio taper potentiometer functions on a logarithmic scale, which is the scale in which the human ear percieves sound. Even though the taper chart appears to have a sudden increase in volume as the rotation increases, in fact the perception of the sound increase will occur on a gradual scale. The linear scale will actually (counterintuitively) have a more significant sudden volume swell effect because of how the human ear perceives the scale. However, linear potentiometers are often used for other functions in audio circuits which do not directly affect audio output. In the end, both types of potentiometers will give you the same range of output (from 0 to full), but the rate at which that range changes varies between the two.
Along with the Dobro name, OMI was acquired by the Gibson Guitar Corporation in 1993. They renamed the company Original Acoustic Instruments and moved production to Nashville. Gibson now uses the name Dobro only for models with the inverted-cone design used originally by the Dobro Manufacturing Company. Gibson also manufactures biscuit-style single-resonator guitars, but it sells them under names such as Hound Dog andEpiphone. The Dobro was first introduced to country music by Roy Acuff.

Upgrading the components in your guitar’s control cavity should give you significant improvements in tone and component life. If your guitar has single-coil pickups, buy 250K pots. If it’s packing ’buckers, go for the 500K jobs. If your ax has humbuckers and single-coils, I recommend 500K pots. This could make your single-coils sound a bit brighter than normal, but it will unlock your humbuckers’ full potential. For this job you’ll also need a soldering iron, solder, safety goggles, wire cutters, and a camera, to help you keep track of your original wiring connections (your cellphone will work just fine for this).
I’m also going to go out on a limb and suggest the earliest Univoxes also included the ‘Lectra, a version of the one-pickup Aria 1930 violin bass (made by Aria). These were basically violin-bodied basses originally inspired by the Gibson EB-0, and popularized among imports by Paul McCartney’s use of the Höfner violin bass, copied by EKO. This was a hollowbody with no f-holes, Cremona brown finish, single neck pickup, bolt-on neck with position dots along the top of the 22-fret bound rosewood fingerboard. Strings anchored to a covered bridge/tailpiece assembly.
• Don’t always blame the frets: Buzzing doesn’t necessarily mean there’s a fret problem. Some guitar players set their bridges for super-low action in their quest for speed, and that can makes frets buzz. For beginners unfamiliar with how accurately tuned strings sound or more experienced players exploring dropped and open tunings for the first time, buzzing can also be a buzz kill. Low tunings like dropped D and open D and open C may prompt guitars with normal action to buzz due to the slack in the strings unless a guitar is set up properly to accommodate such tunings.
Our pick here is the PAC112V version, for a few reasons. First off, the solid alder body offers you the same tonewood you’ll find in a lot of higher end S-style guitars. The maple neck and diecast tuners will feel really premium in your hands, too. But the 112 series further boosts its value with two Alnico V single coil pickups and an Alnico V humbucker. The addition of the humbucker in the bridge position will open up a whole other world of tones for a budding musician, giving the option for both clean, crisp single coil sounds and thick, high-output humbucker growls.
Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
SG Special is pretty much the same thing as the Les Paul 100. The most obvious difference is the body style. Other than that, you get very similar electronics and overall build quality. A lot of people learned their first chords on this guitar, still keeping it as one of their favorite axes. I’ve played this thing a few times and it definitely has some juice.
For more control and fine tuning of your sound, you may want to use a parametric or graphic EQ. A parametric EQ allows you to adjust the width of the frequency band that's being altered and the shape of the curve—how abruptly the boosted or cut area changes to the unmodified area. A graphic EQ divides the frequency ranges into a number of narrow bands which can each be boosted or lowered by sliders, thus giving you a visual or "graphic" representation of how the EQ is being affected. The more bands there are, the more precise your adjustments can be.
Compared to an acoustic guitar, which has a hollow body, electric guitars make much less audible sound when their strings are plucked, so electric guitars are normally plugged into a guitar amplifier and speaker. When an electric guitar is played, string movement produces a signal by generating (i.e., inducing) a small electric current in the magnetic pickups, which are magnets wound with coils of very fine wire. The signal passes through the tone and volume circuits to the output jack, and through a cable to an amplifier.[22] The current induced is proportional to such factors as string density and the amount of movement over the pickups.